] [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 16 MiB at 0x00000000f5400000 [ 0.000000] earlycon: uart0 at MMIO 0x0000000070006000 (options '115200n8') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_UP_CPU reported invalid physical ID (0x80000000) [ 0.000000] percpu: Embedded 21 pages/cpu @ffff8000bff4d000 s48000 r8192 d29824 u86016 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] CPU features: enabling workaround for ARM erratum 834220 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 735336 [ 0.000000] Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes [ 0.000000] log_buf_len min size: 16384 bytes [ 0.000000] log_buf_len: 32768 bytes [ 0.000000] early log buf free: 14420(88%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff] [ 0.000000] Memory: 2832756K/2988032K available (8252K kernel code, 858K rwdata, 3904K rodata, 1024K init, 281K bss, 138892K reserved, 16384K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB) [ 0.000000] .text : 0xffff000008080000 - 0xffff000008890000 ( 8256 KB) [ 0.000000] .rodata : 0xffff000008890000 - 0xffff000008c70000 ( 3968 KB) [ 0.000000] .init : 0xffff000008c70000 - 0xffff000008d70000 ( 1024 KB) [ 0.000000] .data : 0xffff000008d70000 - 0xffff000008e46a00 ( 859 KB) [ 0.000000] .bss : 0xffff000008e46a00 - 0xffff000008e8cf40 ( 282 KB) [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum) [ 0.000000] 0xffff7e0000000000 - 0xffff7e0003000000 ( 48 MB actual) [ 0.000000] memory : 0xffff800000000000 - 0xffff8000c0000000 ( 3072 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] boot misc0 0x0: expected 0x80000 [ 0.000000] (comparison mask = 0x400ffffb) [ 0.000000] boot misc2 0x1f720005: expected 0x1f720f05 [ 0.000000] (comparison mask = 0xffffff17) [ 0.000000] PLL_C already enabled. Postponing set full defaults [ 0.000000] PLL_MB already enabled. Postponing set full defaults [ 0.000000] PLL_U already enabled. Postponing set full defaults [ 0.000000] PLL_D already enabled. Postponing set full defaults [ 0.000000] PLL_DP already enabled. Postponing set full defaults [ 0.000000] boot misc0 0x0: expected 0x20 [ 0.000000] (comparison mask = 0x7ffffff) [ 0.000000] boot misc1 0x90000000: expected 0xc0000000 [ 0.000000] (comparison mask = 0xf8000000) [ 0.000000] boot misc2 0x0: expected 0xf400f0da [ 0.000000] (comparison mask = 0xffffffff) [ 0.000000] boot misc3 0x51b8: expected 0x2004f400 [ 0.000000] (comparison mask = 0xffffffff) [ 0.000000] PLL_P already enabled. Postponing set full defaults [ 0.000000] PLL_X already enabled. Postponing set full defaults [ 0.000000] boot misc1 0x0: expected 0x20 [ 0.000000] (comparison mask = 0xffffff) [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000002] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.008348] Console: colour dummy device 80x25 [ 0.012916] console [tty0] enabled [ 0.016410] bootconsole [uart0] disabled [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.0-rc6-152872-g9c76358 (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Mon Nov 21 03:37:03 PST 2016 [ 0.000000] Boot CPU: AArch64 Processor [411fd071] [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 16 MiB at 0x00000000f5400000 [ 0.000000] earlycon: uart0 at MMIO 0x0000000070006000 (options '115200n8') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_UP_CPU reported invalid physical ID (0x80000000) [ 0.000000] percpu: Embedded 21 pages/cpu @ffff8000bff4d000 s48000 r8192 d29824 u86016 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 832075 [ 0.000000] CPU features: enabling workaround for ARM erratum 834220 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 735336 [ 0.000000] Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes [ 0.000000] log_buf_len min size: 16384 bytes [ 0.000000] log_buf_len: 32768 bytes [ 0.000000] early log buf free: 14420(88%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff] [ 0.000000] Memory: 2832756K/2988032K available (8252K kernel code, 858K rwdata, 3904K rodata, 1024K init, 281K bss, 138892K reserved, 16384K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB) [ 0.000000] .text : 0xffff000008080000 - 0xffff000008890000 ( 8256 KB) [ 0.000000] .rodata : 0xffff000008890000 - 0xffff000008c70000 ( 3968 KB) [ 0.000000] .init : 0xffff000008c70000 - 0xffff000008d70000 ( 1024 KB) [ 0.000000] .data : 0xffff000008d70000 - 0xffff000008e46a00 ( 859 KB) [ 0.000000] .bss : 0xffff000008e46a00 - 0xffff000008e8cf40 ( 282 KB) [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum) [ 0.000000] 0xffff7e0000000000 - 0xffff7e0003000000 ( 48 MB actual) [ 0.000000] memory : 0xffff800000000000 - 0xffff8000c0000000 ( 3072 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] boot misc0 0x0: expected 0x80000 [ 0.000000] (comparison mask = 0x400ffffb) [ 0.000000] boot misc2 0x1f720005: expected 0x1f720f05 [ 0.000000] (comparison mask = 0xffffff17) [ 0.000000] PLL_C already enabled. Postponing set full defaults [ 0.000000] PLL_MB already enabled. Postponing set full defaults [ 0.000000] PLL_U already enabled. Postponing set full defaults [ 0.000000] PLL_D already enabled. Postponing set full defaults [ 0.000000] PLL_DP already enabled. Postponing set full defaults [ 0.000000] boot misc0 0x0: expected 0x20 [ 0.000000] (comparison mask = 0x7ffffff) [ 0.000000] boot misc1 0x90000000: expected 0xc0000000 [ 0.000000] (comparison mask = 0xf8000000) [ 0.000000] boot misc2 0x0: expected 0xf400f0da [ 0.000000] (comparison mask = 0xffffffff) [ 0.000000] boot misc3 0x51b8: expected 0x2004f400 [ 0.000000] (comparison mask = 0xffffffff) [ 0.000000] PLL_P already enabled. Postponing set full defaults [ 0.000000] PLL_X already enabled. Postponing set full defaults [ 0.000000] boot misc1 0x0: expected 0x20 [ 0.000000] (comparison mask = 0xffffff) [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000002] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.008348] Console: colour dummy device 80x25 [ 0.012916] console [tty0] enabled [ 0.016410] bootconsole [uart0] disabled [ 0.020451] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.020463] pid_max: default: 32768 minimum: 301 [ 0.020511] Security Framework initialized [ 0.020539] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.020547] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.021146] ASID allocator initialised with 65536 entries [ 0.053183] Speedo Revision 4 [ 0.053201] Tegra Revision: A02 SKU: 19 CPU Process: 0 SoC Process: 0 [ 0.100618] EFI services will not be available. [ 0.148707] Detected PIPT I-cache on CPU1 [ 0.148734] CPU1: Booted secondary processor [411fd071] [ 0.180736] Detected PIPT I-cache on CPU2 [ 0.180754] CPU2: Booted secondary processor [411fd071] [ 0.212780] Detected PIPT I-cache on CPU3 [ 0.212799] CPU3: Booted secondary processor [411fd071] [ 0.212838] Brought up 4 CPUs [ 0.212868] SMP: Total of 4 processors activated. [ 0.212877] CPU features: detected feature: 32-bit EL0 Support [ 0.212912] CPU: All CPU(s) started at EL2 [ 0.212929] alternatives: patching kernel code [ 0.215279] devtmpfs: initialized [ 0.221903] DMI not present or invalid. [ 0.222044] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.222284] pinctrl core: initialized pinctrl subsystem [ 0.223176] NET: Registered protocol family 16 [ 0.232766] cpuidle: using governor menu [ 0.233264] vdso: 2 pages (1 code @ ffff000008897000, 1 data @ ffff000008d74000) [ 0.233286] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.233757] DMA: preallocated 256 KiB pool for atomic allocations [ 0.234691] Serial: AMBA PL011 UART driver [ 0.269220] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.269759] ACPI: Interpreter disabled. [ 0.270114] PPLCD_VDD: Failed to request enable GPIO172: -517 [ 0.270131] reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517 [ 0.270478] PP1800_LCDIO: Failed to request enable GPIO171: -517 [ 0.270492] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.270540] PP1800_CAM: Failed to request enable GPIO83: -517 [ 0.270553] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.270928] vgaarb: loaded [ 0.271074] SCSI subsystem initialized [ 0.271327] usbcore: registered new interface driver usbfs [ 0.271370] usbcore: registered new interface driver hub [ 0.271413] usbcore: registered new device driver usb [ 0.272052] tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe [ 0.272137] pps_core: LinuxPPS API ver. 1 registered [ 0.272147] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.272170] PTP clock support registered [ 0.272258] dmi: Firmware registration failed. [ 0.272673] Advanced Linux Sound Architecture Driver Initialized. [ 0.273117] clocksource: Switched to clocksource arch_sys_counter [ 0.273197] VFS: Disk quotas dquot_6.6.0 [ 0.273237] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.273379] pnp: PnP ACPI: disabled [ 0.279113] NET: Registered protocol family 2 [ 0.279507] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.279634] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.279836] TCP: Hash tables configured (established 32768 bind 32768) [ 0.279897] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.279928] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.280037] NET: Registered protocol family 1 [ 0.280229] RPC: Registered named UNIX socket transport module. [ 0.280242] RPC: Registered udp transport module. [ 0.280252] RPC: Registered tcp transport module. [ 0.280261] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.280377] Unpacking initramfs... [ 0.365098] Freeing initrd memory: 2364K (ffff80000a070000 - ffff80000a2bf000) [ 0.365460] kvm [1]: 8-bit VMID [ 0.365473] kvm [1]: IDMAP page: 80880000 [ 0.365483] kvm [1]: HYP VA range: 800000000000:ffffffffffff [ 0.366114] kvm [1]: Hyp mode initialized successfully [ 0.366155] kvm [1]: vgic-v2@50044000 [ 0.366241] kvm [1]: vgic interrupt IRQ1 [ 0.366259] kvm [1]: virtual timer IRQ4 [ 0.367740] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.367807] audit: initializing netlink subsys (disabled) [ 0.367837] audit: type=2000 audit(0.355:1): initialized [ 0.368129] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.375321] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.375893] NFS: Registering the id_resolver key type [ 0.375921] Key type id_resolver registered [ 0.375930] Key type id_legacy registered [ 0.375945] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.376087] 9p: Installing v9fs 9p2000 file system support [ 0.377554] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.377574] io scheduler noop registered [ 0.377687] io scheduler cfq registered (default) [ 0.379093] usb3-0 supply vbus not found, using dummy regulator [ 0.380004] libphy: mdio_driver_register: phy-bcm-ns2-pci [ 0.388645] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.389623] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.389876] xenfs: not registering filesystem on non-xen platform [ 0.392897] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.394175] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 313, base_baud = 25500000) is a Tegra [ 1.370901] console [ttyS0] enabled [ 1.374760] SuperH (H)SCI(F) driver initialized [ 1.379557] msm_serial: driver initialized [ 1.384003] Unable to detect cache hierarchy from DT for CPU 0 [ 1.393089] loop: module loaded [ 1.399020] cros-ec-i2c 0-001e: Chrome EC device registered [ 1.405215] max77620 1-003c: PMIC Version OTP:0x35 and ES:0x8 [ 1.418361] PP1200_RCAM: Bringing 1050000uV into 1200000-1200000uV [ 1.425532] PP2800L_RCAM: Bringing 3100000uV into 2800000-2800000uV [ 1.432242] PP1100_SOC_RTC: Bringing 1000000uV into 850000-850000uV [ 1.439086] PP2800L_FCAM: Bringing 3100000uV into 2800000-2800000uV [ 1.445796] PP_LDO6: Bringing 2800000uV into 1800000-1800000uV [ 1.451951] random: fast init done [ 1.458288] hisi_sas: driver version v1.6 [ 1.464148] libphy: Fixed MDIO Bus: probed [ 1.468699] tun: Universal TUN/TAP device driver, 1.6 [ 1.473751] tun: (C) 1999-2004 Max Krasnyansky [ 1.480659] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.486497] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.492465] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.499424] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.505043] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.512873] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.518833] sky2: driver version 1.30 [ 1.522887] VFIO - User Level meta-driver version: 0.3 [ 1.529438] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.535969] ehci-pci: EHCI PCI platform driver [ 1.540453] ehci-platform: EHCI generic platform driver [ 1.545768] ehci-exynos: EHCI EXYNOS driver [ 1.550030] ehci-msm: Qualcomm On-Chip EHCI Host Controller [ 1.555671] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.561857] ohci-pci: OHCI PCI platform driver [ 1.566341] ohci-platform: OHCI generic platform driver [ 1.571640] ohci-exynos: OHCI EXYNOS driver [ 1.637767] tegra-xusb 70090000.usb: Firmware timestamp: 2015-08-10 09:47:54 UTC [ 1.645179] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.650587] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.659117] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.667758] tegra-xusb 70090000.usb: irq 319, io mem 0x70090000 [ 1.674074] hub 1-0:1.0: USB hub found [ 1.677844] hub 1-0:1.0: 5 ports detected [ 1.682157] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.687561] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.695173] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.703553] hub 2-0:1.0: USB hub found [ 1.707321] hub 2-0:1.0: 4 ports detected [ 1.711820] usbcore: registered new interface driver usb-storage [ 1.718443] mousedev: PS/2 mouse device common for all mice [ 1.849976] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0 [ 1.857963] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.865129] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.871395] i2c /dev entries driver [ 1.876279] bq27xxx-battery 2-0055: support ver. 1.2.0 enabled [ 1.898733] sdhci: Secure Digital Host Controller Interface driver [ 1.904945] sdhci: Copyright(c) Pierre Ossman [ 1.909490] Synopsys Designware Multimedia Card Interface Driver [ 1.915786] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.921628] mmc0: Unknown controller version (3). You may experience problems. [ 1.973131] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 1.983725] ledtrig-cpu: registered to indicate activity on CPUs [ 1.993608] usbcore: registered new interface driver usbhid [ 1.999258] usbhid: USB HID core driver [ 2.004232] NET: Registered protocol family 17 [ 2.008816] 9pnet: Installing 9P2000 support [ 2.013208] Key type dns_resolver registered [ 2.021183] registered taskstats version 1 [ 2.030101] tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe [ 2.042591] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.049512] tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe [ 2.061630] mmc0: new high speed MMC card at address 0001 [ 2.067310] mmcblk0: mmc0:0001 BGND3R 29.1 GiB [ 2.071952] mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB [ 2.077991] mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB [ 2.084016] mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB [ 2.092345] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 [ 2.097780] max77686-rtc max77620-rtc: setting system clock to 2000-09-01 17:06:00 UTC (967827960) [ 2.107200] PP1200_AVDD: disabling [ 2.108316] tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe [ 2.122157] PP1200_RCAM: disabling [ 2.125623] PP2800L_RCAM: disabling [ 2.129173] PP2800L_FCAM: disabling [ 2.132715] PP_LDO6: disabling [ 2.135830] PPLCD_VDD: disabling [ 2.139062] PP1800_LCDIO: disabling [ 2.142550] PP1800_CAM: disabling [ 2.145864] ALSA device list: [ 2.148825] No soundcards found. [ 2.152733] Freeing unused kernel memory: 1024K (ffff800000c70000 - ffff800000d70000) System initialization... Mounting /proc :[SUCCESS] Mounting /sys :[SUCCESS] Mounting /dev :[SUCCESS] Mounting /dev/pts :[SUCCESS] Mounting /sys/kernel/debug :[SUCCESS] Mounting other filesystems :[SUCCESS] Enabling hot-plug :[SUCCESS] Populating /dev :[SUCCESS] Starting syslogd :[SUCCESS] Starting telnetd :[SUCCESS] System initialization complete. Please press Enter to activate this console.