U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 3.5 MiB/s done Bytes transferred = 5411296 (5291e0 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 66821 (10505 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x5291e0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013504 Starting kernel ... [ 3.115584] console [ttyS0] enabled [ 3.119060] bootconsole [earlycon0] disabled [ 3.124325] [drm] Initialized drm 1.1.0 20060810 [ 3.129384] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 3.135977] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 3.143289] panel supply power not found, using dummy regulator [ 3.154650] loop: module loaded [ 3.158403] as3722 4-0040: AS3722 with revision 0x1 found [ 3.168529] as3722-sd2: supplied by +5V_SYS [ 3.173033] as3722-sd3: supplied by +5V_SYS [ 3.177389] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 3.183654] as3722-sd4: supplied by +5V_SYS [ 3.187999] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 3.193823] as3722-sd5: supplied by +5V_SYS [ 3.199625] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 3.205453] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 3.211566] as3722-ldo2: supplied by +1.8V_VDDIO [ 3.217302] as3722-ldo3: supplied by +3.3V_SYS [ 3.221753] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 3.229419] as3722-ldo4: supplied by +3.3V_SYS [ 3.234017] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 3.240134] as3722-ldo5: supplied by +1.8V_VDDIO [ 3.244918] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 3.251699] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 3.257832] as3722-ldo7: supplied by +1.8V_VDDIO [ 3.262605] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 3.269256] as3722-ldo9: supplied by +5V_SYS [ 3.273828] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 3.280132] as3722-ldo10: supplied by +5V_SYS [ 3.284639] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 3.291172] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 3.341689] cros-ec-spi spi32766.0: Chrome EC device registered [ 3.351436] random: fast init done [ 3.357147] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 3.363546] libphy: Fixed MDIO Bus: probed [ 3.367650] CAN device driver interface [ 3.371507] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 3.378455] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.384129] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 3.391567] usbcore: registered new interface driver pegasus [ 3.397275] usbcore: registered new interface driver asix [ 3.402698] usbcore: registered new interface driver ax88179_178a [ 3.408832] usbcore: registered new interface driver cdc_ether [ 3.414714] usbcore: registered new interface driver smsc75xx [ 3.420497] usbcore: registered new interface driver smsc95xx [ 3.426282] usbcore: registered new interface driver net1080 [ 3.431965] usbcore: registered new interface driver cdc_subset [ 3.437914] usbcore: registered new interface driver zaurus [ 3.443530] usbcore: registered new interface driver cdc_ncm [ 3.449289] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.455807] ehci-pci: EHCI PCI platform driver [ 3.460276] tegra-ehci: Tegra EHCI driver [ 3.464606] usbcore: registered new interface driver cdc_acm [ 3.470257] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 3.478286] usbcore: registered new interface driver cdc_wdm [ 3.483987] usbcore: registered new interface driver usb-storage [ 3.490248] mousedev: PS/2 mouse device common for all mice [ 3.496126] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi32766/spi32766.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 3.511156] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 3.518023] as3722-rtc as3722-rtc: RTC interrupt 370 [ 3.524849] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 3.531999] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 3.538307] i2c /dev entries driver [ 3.542545] usbcore: registered new interface driver uvcvideo [ 3.548284] USB Video Class driver (1.1.1) [ 3.552367] gspca_main: v2.14.0 registered [ 3.556746] 0-004c supply vcc not found, using dummy regulator [ 3.564527] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 3.572952] sdhci: Secure Digital Host Controller Interface driver [ 3.579127] sdhci: Copyright(c) Pierre Ossman [ 3.583469] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.589264] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 3.595065] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 3.599934] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 3.604957] mmc0: Unknown controller version (3). You may experience problems. [ 3.612190] mmc0: Invalid maximum block size, assuming 512 bytes [ 3.674665] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 3.685108] usbcore: registered new interface driver usbhid [ 3.693588] usbhid: USB HID core driver [ 3.701968] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 3.755113] max98090 0-0010: MAX98090 REVID=0x43 [ 3.762380] max98090 0-0010: use default 2.8v micbias [ 3.765037] mmc0: new high speed MMC card at address 0001 [ 3.765492] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 3.765687] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 3.765885] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 3.766051] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 3.769260] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 3.803125] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 3.810948] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 3.819056] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 4.104639] NET: Registered protocol family 10 [ 4.264646] mip6: Mobile IPv6 [ 4.267606] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.274595] NET: Registered protocol family 17 [ 4.279049] NET: Registered protocol family 15 [ 4.283479] can: controller area network core (rev 20120528 abi 9) [ 4.324678] NET: Registered protocol family 29 [ 4.329108] can: raw protocol (rev 20120528) [ 4.333365] can: broadcast manager protocol (rev 20160617 t) [ 4.339022] can: netlink gateway (rev 20130117) max_hops=1 [ 4.384693] Bluetooth: RFCOMM socket layer initialized [ 4.389826] Bluetooth: RFCOMM ver 1.11 [ 4.393566] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.398876] Bluetooth: BNEP socket layer initialized [ 4.403826] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.409740] Bluetooth: HIDP socket layer initialized [ 4.414862] Key type dns_resolver registered [ 4.419582] Registering SWP/SWPB emulation handler [ 4.425491] +3.3V_RUN: supplied by +3.3V_SYS [ 4.430262] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 4.435926] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 4.440572] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 4.445309] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 4.450489] +VDD_LED: supplied by +VDD_MUX [ 4.454958] +5V_VDD_TS_SW: supplied by +5V_SYS [ 4.459613] +5V_USB_HS: supplied by +5V_SYS [ 4.463997] +5V_USB_SS: supplied by +5V_SYS [ 4.469083] +3.3V_PANEL: supplied by +3.3V_RUN [ 4.474262] +3.3V_LP0: supplied by +3.3V_SYS [ 4.475684] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3 [ 4.487502] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 4.493376] +5V_HDMI_CON: supplied by +5V_SYS [ 4.498850] usb3-0 supply vbus not found, using dummy regulator [ 4.504848] usb3-1 supply vbus not found, using dummy regulator [ 4.513057] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.519247] panel supply power not found, using dummy regulator [ 4.595392] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 4.602801] tegra-xusb 70090000.usb: xHCI Host Controller [ 4.608232] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 4.617822] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 4.626492] tegra-xusb 70090000.usb: irq 342, io mem 0x70090000 [ 4.633258] hub 1-0:1.0: USB hub found [ 4.637102] hub 1-0:1.0: 6 ports detected [ 4.641840] tegra-xusb 70090000.usb: xHCI Host Controller [ 4.647273] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 4.655003] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.663881] hub 2-0:1.0: USB hub found [ 4.667692] hub 2-0:1.0: 2 ports detected [ 4.672877] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 4.678750] mmc1: Unknown controller version (3). You may experience problems. [ 4.686034] mmc1: Invalid maximum block size, assuming 512 bytes [ 4.692544] mmc1: Switching to 3.3V signalling voltage failed [ 4.754753] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit [ 4.762996] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 4.769929] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 4.778059] mmc2: Unknown controller version (3). You may experience problems. [ 4.785417] mmc2: Invalid maximum block size, assuming 512 bytes [ 4.826987] mmc1: new high speed SDIO card at address 0001 [ 4.854775] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 4.962704] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.969360] [drm] No driver support for vblank timestamp query. [ 5.004687] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 5.016046] mmc2: new high speed SDHC card at address 0007 [ 5.016702] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 5.025530] GPT:Primary header alternate_lba != Alt. header my_lba [ 5.025533] GPT:3014591 != 15564799 [ 5.025534] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 5.025535] GPT:3014591 != 15564799 [ 5.025536] GPT: Use GNU Parted to correct GPT errors. [ 5.025567] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 5.032602] Console: switching to colour frame buffer device 170x48 [ 5.090722] drm drm: fb0: frame buffer device [ 5.134720] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.141140] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 5.148781] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824) [ 5.163016] +1.8V_RUN_CAM: disabling [ 5.166848] +1.2V_RUN_CAM_FRONT: disabling [ 5.171144] +1.05V_RUN_CAM_REAR: disabling [ 5.175523] +2.8V_RUN_TOUCH: disabling [ 5.179526] +2.8V_RUN_CAM_AF: disabling [ 5.183567] +1.8V_RUN_VPP_FUSE: disabling [ 5.187788] +5V_VDD_TS_SW: disabling [ 5.191550] ALSA device list: [ 5.194509] #0: tegra-hda at 0x70038000 irq 341 [ 5.199258] #1: GoogleNyanBig [ 5.203161] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 5.319515] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 5.334375] input: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 5.674697] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 5.704953] EXT4-fs (mmcblk0p3): recovery complete [ 5.709740] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 5.717884] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 5.725103] devtmpfs: mounted [ 5.728507] Freeing unused kernel memory: 1024K (c0c00000 - c0d00000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 6.748416] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 7.094718] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 7.273501] usb-storage 1-1:1.0: USB Mass Storage device detected [ 7.280510] scsi host0: usb-storage 1-1:1.0 [ 7.374825] scsi host0: runtime PM trying to activate child device host0 but parent (1-1:1.0) is not active [ 8.406480] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 8.579373] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 8.588419] sd 0:0:0:0: [sda] Write Protect is off [ 8.593202] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 8.599379] sd 0:0:0:0: [sda] No Caching mode page found [ 8.604747] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 8.629744] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 8.644208] sd 0:0:0:0: [sda] Attached SCSI removable disk mount -t sysfs none /sys root@(none):/# root@(none):/# mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:52 1970 [ 31.887035] PM: Syncing filesystems ... done. [ 31.897188] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 31.905294] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 31.914957] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 31.923561] Suspending console(s) (use no_console_suspend to debug) [ 32.136066] PM: suspend of devices complete after 205.628 msecs [ 32.137835] PM: late suspend of devices complete after 1.759 msecs [ 32.138655] PM: noirq suspend of devices complete after 0.815 msecs [ 32.138657] Disabling non-boot CPUs ... [ 32.194985] CPU1: shutdown [ 32.324984] CPU2: shutdown [ 32.404834] IRQ17 no longer affine to CPU3 [ 32.405004] CPU3: shutdown [ 32.455463] Entering suspend state LP1 [ 32.455489] Enabling non-boot CPUs ... [ 32.515839] CPU1 is up [ 32.576003] CPU2 is up [ 32.636233] CPU3 is up [ 32.636807] PM: noirq resume of devices complete after 0.568 msecs [ 32.638103] PM: early resume of devices complete after 0.806 msecs [ 32.679954] mmc1: Switching to 3.3V signalling voltage failed [ 32.864995] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 32.934633] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 33.041733] PM: resume of devices complete after 403.621 msecs [ 33.127999] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:57 1970 [ 34.325414] PM: Syncing filesystems ... done. [ 34.335053] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 34.343226] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 34.352880] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 34.361531] Suspending console(s) (use no_console_suspend to debug) [ 34.586013] PM: suspend of devices complete after 217.613 msecs [ 34.586912] PM: late suspend of devices complete after 0.895 msecs [ 34.587736] PM: noirq suspend of devices complete after 0.821 msecs [ 34.587738] Disabling non-boot CPUs ... [ 34.624965] CPU1: shutdown [ 34.724960] CPU2: shutdown [ 34.824935] CPU3: shutdown [ 34.875416] Entering suspend state LP1 [ 34.875442] Enabling non-boot CPUs ... [ 34.935827] CPU1 is up [ 34.995981] CPU2 is up [ 35.056204] CPU3 is up [ 35.056762] PM: noirq resume of devices complete after 0.553 msecs [ 35.058412] PM: early resume of devices complete after 1.162 msecs [ 35.100216] mmc1: Switching to 3.3V signalling voltage failed [ 35.354626] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 35.371302] PM: resume of devices complete after 312.885 msecs [ 35.446628] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:02 1970 [ 36.745023] PM: Syncing filesystems ... done. [ 36.754369] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 36.762486] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 36.772146] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 36.780799] Suspending console(s) (use no_console_suspend to debug) [ 37.005986] PM: suspend of devices complete after 218.317 msecs [ 37.006887] PM: late suspend of devices complete after 0.896 msecs [ 37.007711] PM: noirq suspend of devices complete after 0.821 msecs [ 37.007713] Disabling non-boot CPUs ... [ 37.044943] CPU1: shutdown [ 37.154929] CPU2: shutdown [ 37.264913] CPU3: shutdown [ 37.315394] Entering suspend state LP1 [ 37.315420] Enabling non-boot CPUs ... [ 37.375823] CPU1 is up [ 37.435960] CPU2 is up [ 37.496177] CPU3 is up [ 37.496753] PM: noirq resume of devices complete after 0.571 msecs [ 37.498599] PM: early resume of devices complete after 1.345 msecs [ 37.550301] mmc1: Switching to 3.3V signalling voltage failed [ 37.804656] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 37.821530] PM: resume of devices complete after 322.925 msecs [ 37.896842] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:07 1970 [ 39.184920] PM: Syncing filesystems ... done. [ 39.194306] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 39.202512] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 39.212176] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 39.220835] Suspending console(s) (use no_console_suspend to debug) [ 39.435960] PM: suspend of devices complete after 208.268 msecs [ 39.436864] PM: late suspend of devices complete after 0.900 msecs [ 39.437692] PM: noirq suspend of devices complete after 0.824 msecs [ 39.437694] Disabling non-boot CPUs ... [ 39.484923] CPU1: shutdown [ 39.584914] CPU2: shutdown [ 39.684883] CPU3: shutdown [ 39.735370] Entering suspend state LP1 [ 39.735397] Enabling non-boot CPUs ... [ 39.795790] CPU1 is up [ 39.855935] CPU2 is up [ 39.916161] CPU3 is up [ 39.916708] PM: noirq resume of devices complete after 0.542 msecs [ 39.918402] PM: early resume of devices complete after 1.203 msecs [ 39.969568] mmc1: Switching to 3.3V signalling voltage failed [ 40.224616] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 40.240652] PM: resume of devices complete after 322.244 msecs [ 40.315984] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:12 1970 [ 41.604685] PM: Syncing filesystems ... done. [ 41.613991] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 41.622119] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 41.631782] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 41.640466] Suspending console(s) (use no_console_suspend to debug) [ 41.855934] PM: suspend of devices complete after 208.610 msecs [ 41.856832] PM: late suspend of devices complete after 0.894 msecs [ 41.857663] PM: noirq suspend of devices complete after 0.827 msecs [ 41.857664] Disabling non-boot CPUs ... [ 41.894900] CPU1: shutdown [ 41.994894] CPU2: shutdown [ 42.104850] CPU3: shutdown [ 42.155355] Entering suspend state LP1 [ 42.155382] Enabling non-boot CPUs ... [ 42.215766] CPU1 is up [ 42.275916] CPU2 is up [ 42.336136] CPU3 is up [ 42.336687] PM: noirq resume of devices complete after 0.547 msecs [ 42.338594] PM: early resume of devices complete after 1.404 msecs [ 42.380135] mmc1: Switching to 3.3V signalling voltage failed [ 42.634556] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 42.651333] PM: resume of devices complete after 312.734 msecs [ 42.726655] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:17 1970 [ 44.024894] PM: Syncing filesystems ... done. [ 44.034307] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 44.042430] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 44.052093] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 44.060755] Suspending console(s) (use no_console_suspend to debug) [ 44.285911] PM: suspend of devices complete after 218.286 msecs [ 44.286809] PM: late suspend of devices complete after 0.894 msecs [ 44.287628] PM: noirq suspend of devices complete after 0.815 msecs [ 44.287630] Disabling non-boot CPUs ... [ 44.334872] CPU1: shutdown [ 44.434863] CPU2: shutdown [ 44.544827] CPU3: shutdown [ 44.595323] Entering suspend state LP1 [ 44.595349] Enabling non-boot CPUs ... [ 44.655735] CPU1 is up [ 44.715884] CPU2 is up [ 44.776108] CPU3 is up [ 44.776637] PM: noirq resume of devices complete after 0.525 msecs [ 44.778326] PM: early resume of devices complete after 1.195 msecs [ 44.829708] mmc1: Switching to 3.3V signalling voltage failed [ 45.084483] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 45.100780] PM: resume of devices complete after 322.449 msecs [ 45.176148] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:22 1970 [ 46.464813] PM: Syncing filesystems ... done. [ 46.474125] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 46.482343] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 46.492007] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 46.500689] Suspending console(s) (use no_console_suspend to debug) [ 46.715886] PM: suspend of devices complete after 208.339 msecs [ 46.716784] PM: late suspend of devices complete after 0.894 msecs [ 46.717612] PM: noirq suspend of devices complete after 0.825 msecs [ 46.717614] Disabling non-boot CPUs ... [ 46.754846] CPU1: shutdown [ 46.854832] CPU2: shutdown [ 46.954801] CPU3: shutdown [ 47.005293] Entering suspend state LP1 [ 47.005319] Enabling non-boot CPUs ... [ 47.065716] CPU1 is up [ 47.125878] CPU2 is up [ 47.186085] CPU3 is up [ 47.186623] PM: noirq resume of devices complete after 0.533 msecs [ 47.188478] PM: early resume of devices complete after 1.356 msecs [ 47.239740] mmc1: Switching to 3.3V signalling voltage failed [ 47.424838] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 47.494500] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 47.601216] PM: resume of devices complete after 412.725 msecs [ 47.683444] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:27 1970 [ 48.874826] PM: Syncing filesystems ... done. [ 48.884352] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 48.892483] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 48.902149] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 48.910868] Suspending console(s) (use no_console_suspend to debug) [ 49.125937] PM: suspend of devices complete after 208.209 msecs [ 49.127351] PM: late suspend of devices complete after 1.404 msecs [ 49.128140] PM: noirq suspend of devices complete after 0.784 msecs [ 49.128142] Disabling non-boot CPUs ... [ 49.174823] CPU1: shutdown [ 49.274814] CPU2: shutdown [ 49.384779] CPU3: shutdown [ 49.435274] Entering suspend state LP1 [ 49.435300] Enabling non-boot CPUs ... [ 49.495688] CPU1 is up [ 49.555837] CPU2 is up [ 49.616060] CPU3 is up [ 49.616597] PM: noirq resume of devices complete after 0.533 msecs [ 49.618276] PM: early resume of devices complete after 1.169 msecs [ 49.659916] mmc1: Switching to 3.3V signalling voltage failed [ 49.914499] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 49.931004] PM: resume of devices complete after 312.722 msecs [ 50.006340] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:32 1970 [ 51.304808] PM: Syncing filesystems ... done. [ 51.314241] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 51.322363] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 51.332028] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 51.340683] Suspending console(s) (use no_console_suspend to debug) [ 51.565832] PM: suspend of devices complete after 218.277 msecs [ 51.566732] PM: late suspend of devices complete after 0.896 msecs [ 51.567557] PM: noirq suspend of devices complete after 0.821 msecs [ 51.567559] Disabling non-boot CPUs ... [ 51.604798] CPU1: shutdown [ 51.704781] CPU2: shutdown [ 51.804756] CPU3: shutdown [ 51.855246] Entering suspend state LP1 [ 51.855272] Enabling non-boot CPUs ... [ 51.915667] CPU1 is up [ 51.975814] CPU2 is up [ 52.036031] CPU3 is up [ 52.036564] PM: noirq resume of devices complete after 0.528 msecs [ 52.038351] PM: early resume of devices complete after 1.271 msecs [ 52.079617] mmc1: Switching to 3.3V signalling voltage failed [ 52.334452] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 52.350627] PM: resume of devices complete after 312.270 msecs [ 52.425939] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:37 1970 [ 53.724774] PM: Syncing filesystems ... done. [ 53.734317] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 53.742525] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 53.752189] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 53.760753] Suspending console(s) (use no_console_suspend to debug) [ 53.985864] PM: suspend of devices complete after 218.237 msecs [ 53.986853] PM: late suspend of devices complete after 0.980 msecs [ 53.987721] PM: noirq suspend of devices complete after 0.864 msecs [ 53.987723] Disabling non-boot CPUs ... [ 54.024774] CPU1: shutdown [ 54.124754] CPU2: shutdown [ 54.234721] CPU3: shutdown [ 54.285219] Entering suspend state LP1 [ 54.285245] Enabling non-boot CPUs ... [ 54.345638] CPU1 is up [ 54.405786] CPU2 is up [ 54.466008] CPU3 is up [ 54.466539] PM: noirq resume of devices complete after 0.527 msecs [ 54.468501] PM: early resume of devices complete after 1.473 msecs [ 54.509928] mmc1: Switching to 3.3V signalling voltage failed [ 54.764429] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 54.781118] PM: resume of devices complete after 312.611 msecs [ 54.856450] Restarting tasks ... done. root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE