U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################# 3.6 MiB/s done Bytes transferred = 7093952 (6c3ec0 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.5 MiB/s done Bytes transferred = 66821 (10505 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6c3ec0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013504 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.8.0-rc5-110772-gc693593 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Sep 4 15:05:43 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt:Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c141d300, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 14 pages/cpu @eef85000 s25984 r8192 d23168 u57344 [ 0.000000] pcpu-alloc: s25984 r8192 d23168 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1995992K/2097148K available (9216K kernel code, 1148K rwdata, 3968K rodata, 2048K init, 343K bss, 35620K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0c00000 (10208 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc141f180 (1149 kB) [ 0.000000] .bss : 0xc1421000 - 0xc1476c48 ( 344 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000012] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000018] Switching to timer-based delay loop, resolution 1000ns [ 0.001774] arm_arch_timer: Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.001781] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001787] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001791] Switching to timer-based delay loop, resolution 83ns [ 0.001983] Console: colour dummy device 80x30 [ 0.001996] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000) [ 0.002002] pid_max: default: 32768 minimum: 301 [ 0.002040] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002044] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002287] CPU: Testing write buffer coherency: ok [ 0.002398] /cpus/cpu@0 missing clock-frequency property [ 0.002413] /cpus/cpu@1 missing clock-frequency property [ 0.002427] /cpus/cpu@2 missing clock-frequency property [ 0.002441] /cpus/cpu@3 missing clock-frequency property [ 0.002446] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002456] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.003756] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004358] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006948] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.011946] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.016673] Brought up 4 CPUs [ 0.016680] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.016683] CPU: All CPU(s) started in SVC mode. [ 0.017220] devtmpfs: initialized [ 0.024137] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.024329] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.024853] pinctrl core: initialized pinctrl subsystem [ 0.025540] NET: Registered protocol family 16 [ 0.026206] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.041710] cpuidle: using governor menu [ 0.047890] No ATAGs? [ 0.047902] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.047906] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.049997] Serial: AMBA PL011 UART driver [ 0.050966] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.068484] +5V_SYS: supplied by +VDD_MUX [ 0.068585] +3.3V_SYS: supplied by +VDD_MUX [ 0.068804] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.068809] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.068839] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.068843] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.068872] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.068876] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.068903] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.068907] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.068983] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.068987] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.069015] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.069019] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.070108] vgaarb: loaded [ 0.070392] SCSI subsystem initialized [ 0.070450] libata version 3.00 loaded. [ 0.070547] usbcore: registered new interface driver usbfs [ 0.070572] usbcore: registered new interface driver hub [ 0.070594] usbcore: registered new device driver usb [ 0.071932] pps_core: LinuxPPS API ver. 1 registered [ 0.071936] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.071945] PTP clock support registered [ 0.072015] EDAC MC: Ver: 3.0.0 [ 0.072457] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.072466] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.072946] clocksource: Switched to clocksource arch_sys_counter [ 0.076607] NET: Registered protocol family 2 [ 0.076818] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.076851] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.076914] TCP: Hash tables configured (established 8192 bind 8192) [ 0.076935] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.076949] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.077011] NET: Registered protocol family 1 [ 0.077161] RPC: Registered named UNIX socket transport module. [ 0.077165] RPC: Registered udp transport module. [ 0.077167] RPC: Registered tcp transport module. [ 0.077170] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.077174] PCI: CLS 0 bytes, default 64 [ 0.077618] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.078170] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.078448] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.082175] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.082476] NFS: Registering the id_resolver key type [ 0.082488] Key type id_resolver registered [ 0.082491] Key type id_legacy registered [ 0.082507] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.082966] bounce: pool size: 64 pages [ 0.083040] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.083044] io scheduler noop registered [ 0.083047] io scheduler deadline registered [ 0.083116] io scheduler cfq registered (default) [ 0.084992] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.085166] libphy: mdio_driver_register: phy-bcm-ns2-pci [ 0.093804] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.094412] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.115686] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.116826] console [ttyS0] disabled [ 0.116842] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 0.977804] console [ttyS0] enabled [ 0.981599] SuperH (H)SCI(F) driver initialized [ 0.986476] msm_serial: driver initialized [ 0.990634] STMicroelectronics ASC driver initialized [ 0.997086] [drm] Initialized drm 1.1.0 20060810 [ 1.002848] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.009385] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.016641] panel supply power not found, using dummy regulator [ 1.026369] brd: module loaded [ 1.031550] loop: module loaded [ 1.035592] as3722 4-0040: AS3722 with revision 0x1 found [ 1.045302] as3722-sd2: supplied by +5V_SYS [ 1.049754] as3722-sd3: supplied by +5V_SYS [ 1.054093] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.060275] as3722-sd4: supplied by +5V_SYS [ 1.064617] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.070361] as3722-sd5: supplied by +5V_SYS [ 1.075949] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.081689] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.087710] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.093334] as3722-ldo3: supplied by +3.3V_SYS [ 1.097782] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.105358] as3722-ldo4: supplied by +3.3V_SYS [ 1.109955] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.115975] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.120745] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.127438] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.133481] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.138251] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.144808] as3722-ldo9: supplied by +5V_SYS [ 1.149374] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.155581] as3722-ldo10: supplied by +5V_SYS [ 1.160095] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.166543] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.179262] random: fast init done [ 1.184820] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.191078] libphy: Fixed MDIO Bus: probed [ 1.195457] CAN device driver interface [ 1.200055] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.207005] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.213732] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.221138] usbcore: registered new interface driver pegasus [ 1.226807] usbcore: registered new interface driver asix [ 1.232211] usbcore: registered new interface driver ax88179_178a [ 1.238308] usbcore: registered new interface driver cdc_ether [ 1.244154] usbcore: registered new interface driver smsc75xx [ 1.249911] usbcore: registered new interface driver smsc95xx [ 1.255660] usbcore: registered new interface driver net1080 [ 1.261324] usbcore: registered new interface driver cdc_subset [ 1.267246] usbcore: registered new interface driver zaurus [ 1.272831] usbcore: registered new interface driver cdc_ncm [ 1.279140] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.285657] ehci-pci: EHCI PCI platform driver [ 1.290109] ehci-platform: EHCI generic platform driver [ 1.295398] ehci-orion: EHCI orion driver [ 1.299450] SPEAr-ehci: EHCI SPEAr driver [ 1.303505] ehci-st: EHCI STMicroelectronics driver [ 1.308425] ehci-exynos: EHCI EXYNOS driver [ 1.312651] ehci-atmel: EHCI Atmel driver [ 1.316703] tegra-ehci: Tegra EHCI driver [ 1.320770] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.326942] ohci-pci: OHCI PCI platform driver [ 1.331393] ohci-platform: OHCI generic platform driver [ 1.336668] ohci-omap3: OHCI OMAP3 driver [ 1.340720] SPEAr-ohci: OHCI SPEAr driver [ 1.344775] ohci-st: OHCI STMicroelectronics driver [ 1.349695] ohci-atmel: OHCI Atmel driver [ 1.353958] usbcore: registered new interface driver usb-storage [ 1.360533] mousedev: PS/2 mouse device common for all mice [ 1.366755] 1-0015 supply vcc not found, using dummy regulator [ 1.373957] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.380821] as3722-rtc as3722-rtc: RTC interrupt 370 [ 1.387714] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.394853] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.401214] i2c /dev entries driver [ 1.407151] 0-004c supply vcc not found, using dummy regulator [ 1.417080] sdhci: Secure Digital Host Controller Interface driver [ 1.423261] sdhci: Copyright(c) Pierre Ossman [ 1.428172] Synopsys Designware Multimedia Card Interface Driver [ 1.434556] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.440497] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.446258] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.451135] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.456122] mmc0: Unknown controller version (3). You may experience problems. [ 1.463359] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.512953] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 1.521669] ledtrig-cpu: registered to indicate activity on CPUs [ 1.527809] usbcore: registered new interface driver usbhid [ 1.533433] usbhid: USB HID core driver [ 1.539542] NET: Registered protocol family 10 [ 1.544340] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.550595] NET: Registered protocol family 17 [ 1.555044] can: controller area network core (rev 20120528 abi 9) [ 1.561253] NET: Registered protocol family 29 [ 1.565697] can: raw protocol (rev 20120528) [ 1.569964] can: broadcast manager protocol (rev 20160617 t) [ 1.575619] can: netlink gateway (rev 20130117) max_hops=1 [ 1.581259] Key type dns_resolver registered [ 1.585784] ThumbEE CPU extension supported. [ 1.590057] Registering SWP/SWPB emulation handler [ 1.596767] +3.3V_RUN: supplied by +3.3V_SYS [ 1.601815] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.607503] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.607882] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 1.620313] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.624959] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.630289] +VDD_LED: supplied by +VDD_MUX [ 1.634750] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.639538] +5V_USB_HS: supplied by +5V_SYS [ 1.644068] +5V_USB_SS: supplied by +5V_SYS [ 1.649339] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.649674] mmc0: new high speed MMC card at address 0001 [ 1.650506] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.651139] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.651778] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.652333] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 1.658365] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.688028] +3.3V_LP0: supplied by +3.3V_SYS [ 1.692926] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.693266] elan_i2c 1-0015: failed to read report data: -121 [ 1.704691] +5V_HDMI_CON: supplied by +5V_SYS [ 1.709918] usb3-0 supply vbus not found, using dummy regulator [ 1.715945] usb3-1 supply vbus not found, using dummy regulator [ 1.725667] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.732431] panel supply power not found, using dummy regulator [ 1.739393] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.745207] mmc1: Unknown controller version (3). You may experience problems. [ 1.752507] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.758800] mmc1: Switching to 3.3V signalling voltage failed [ 1.803037] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit [ 1.811794] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.816693] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.821687] mmc2: Unknown controller version (3). You may experience problems. [ 1.829011] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.833153] elan_i2c 1-0015: invalid report id data (ff) [ 1.878938] mmc1: new high speed SDIO card at address 0001 [ 1.884755] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 1.987992] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.994604] [drm] No driver support for vblank timestamp query. [ 2.029679] mmc2: new high speed SDHC card at address 0007 [ 2.030301] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.038895] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.038898] GPT:3014591 != 15564799 [ 2.038899] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.038900] GPT:3014591 != 15564799 [ 2.038901] GPT: Use GNU Parted to correct GPT errors. [ 2.038926] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.055749] Console: switching to colour frame buffer device 170x48 [ 2.107118] drm drm: fb0: frame buffer device [ 2.128023] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.134912] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.142552] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.155003] +1.8V_RUN_CAM: disabling [ 2.158794] +3.3V_RUN_CAM: disabling [ 2.162524] +1.2V_RUN_CAM_FRONT: disabling [ 2.166828] +1.05V_RUN_CAM_REAR: disabling [ 2.171103] +2.8V_RUN_TOUCH: disabling [ 2.175041] +2.8V_RUN_CAM_AF: disabling [ 2.179062] +1.8V_RUN_VPP_FUSE: disabling [ 2.183241] +5V_VDD_TS_SW: disabling [ 2.186814] +5V_USB_HS: disabling [ 2.190148] +5V_USB_SS: disabling [ 2.194507] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.203163] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.621454] EXT4-fs (mmcblk0p3): recovery complete [ 2.627021] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.635155] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.642302] devtmpfs: mounted [ 2.646026] Freeing unused kernel memory: 2048K (c1100000 - c1300000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#