U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.multi_v7_defconfig Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################# 4 MiB/s done Bytes transferred = 7092848 (6c3a70 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.7 MiB/s done Bytes transferred = 66621 (1043d hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6c3a70 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 8301343c Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.8.0-rc3-110147-gfa8410b (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Aug 21 16:34:34 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c141cf40, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 14 pages/cpu @eef85000 s25984 r8192 d23168 u57344 [ 0.000000] pcpu-alloc: s25984 r8192 d23168 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1994976K/2096128K available (9216K kernel code, 1147K rwdata, 3968K rodata, 2048K init, 343K bss, 35616K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0c00000 (10208 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc141edc0 (1148 kB) [ 0.000000] .bss : 0xc1420000 - 0xc1475c88 ( 344 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000029] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000043] Switching to timer-based delay loop, resolution 1000ns [ 0.005400] arm_arch_timer: Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.005418] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.005435] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.005447] Switching to timer-based delay loop, resolution 83ns [ 0.005964] Console: colour dummy device 80x30 [ 0.005990] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000) [ 0.006004] pid_max: default: 32768 minimum: 301 [ 0.006098] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006109] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006709] CPU: Testing write buffer coherency: ok [ 0.006927] /cpus/cpu@0 missing clock-frequency property [ 0.006969] /cpus/cpu@1 missing clock-frequency property [ 0.007010] /cpus/cpu@2 missing clock-frequency property [ 0.007052] /cpus/cpu@3 missing clock-frequency property [ 0.007063] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.007084] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.010782] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.012235] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.015918] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.020922] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.025374] Brought up 4 CPUs [ 0.025393] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.025401] CPU: All CPU(s) started in SVC mode. [ 0.026875] devtmpfs: initialized [ 0.047497] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.047936] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.049289] pinctrl core: initialized pinctrl subsystem [ 0.051053] NET: Registered protocol family 16 [ 0.052974] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.070579] cpuidle: using governor menu [ 0.089299] No ATAGs? [ 0.089326] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.089336] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.095579] Serial: AMBA PL011 UART driver [ 0.125668] +5V_SYS: supplied by +VDD_MUX [ 0.125991] +3.3V_SYS: supplied by +VDD_MUX [ 0.126631] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.126646] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.126733] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.126745] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.126908] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.126920] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.127003] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.127015] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.127098] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.127110] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.127192] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.127203] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.130461] vgaarb: loaded [ 0.131285] SCSI subsystem initialized [ 0.131453] libata version 3.00 loaded. [ 0.131725] usbcore: registered new interface driver usbfs [ 0.131791] usbcore: registered new interface driver hub [ 0.131865] usbcore: registered new device driver usb [ 0.135458] pps_core: LinuxPPS API ver. 1 registered [ 0.135468] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.135491] PTP clock support registered [ 0.135690] EDAC MC: Ver: 3.0.0 [ 0.138919] clocksource: Switched to clocksource arch_sys_counter [ 0.150209] NET: Registered protocol family 2 [ 0.150710] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.150809] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.150995] TCP: Hash tables configured (established 8192 bind 8192) [ 0.151049] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.151090] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.151254] NET: Registered protocol family 1 [ 0.151578] RPC: Registered named UNIX socket transport module. [ 0.151588] RPC: Registered udp transport module. [ 0.151595] RPC: Registered tcp transport module. [ 0.151602] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.151612] PCI: CLS 0 bytes, default 64 [ 0.152778] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.154299] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.155020] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.166632] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.167495] NFS: Registering the id_resolver key type [ 0.167523] Key type id_resolver registered [ 0.167531] Key type id_legacy registered [ 0.167572] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.168841] bounce: pool size: 64 pages [ 0.169074] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.169085] io scheduler noop registered [ 0.169093] io scheduler deadline registered [ 0.169296] io scheduler cfq registered (default) [ 0.174987] usb2-0 supply vbus not found, using dummy regulator [ 0.175113] usb2-1 supply vbus not found, using dummy regulator [ 0.175503] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.176201] libphy: mdio_driver_register: phy-bcm-ns2-pci [ 0.192205] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 0.192258] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 0.199595] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.201381] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 0.267752] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.270701] console [ttyS0] disabled [ 0.270765] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 333, base_baud = 25500000) is a Tegra [ 1.128765] console [ttyS0] enabled [ 1.133241] SuperH (H)SCI(F) driver initialized [ 1.138848] msm_serial: driver initialized [ 1.143162] STMicroelectronics ASC driver initialized [ 1.149143] serial-tegra serial@0,70006000: failed to get alias id, errno -19 [ 1.156334] serial-tegra serial@0,70006040: failed to get alias id, errno -19 [ 1.166664] [drm] Initialized drm 1.1.0 20060810 [ 1.174565] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.194367] brd: module loaded [ 1.203502] loop: module loaded [ 1.207113] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.215441] as3722 4-0040: AS3722 with revision 0x1 found [ 1.226636] as3722-sd2: supplied by +5V_SYS [ 1.231338] as3722-sd3: supplied by +5V_SYS [ 1.235771] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.242164] as3722-sd4: supplied by +5V_SYS [ 1.246815] as3722-sd5: supplied by +5V_SYS [ 1.252902] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.259018] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.265274] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.271226] as3722-ldo3: supplied by +3.3V_SYS [ 1.275721] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.283538] as3722-ldo4: supplied by +3.3V_SYS [ 1.288212] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.294487] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.299334] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.306301] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.311973] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.318162] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.330605] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.350714] random: fast init done [ 1.354281] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.362757] libphy: Fixed MDIO Bus: probed [ 1.367713] CAN device driver interface [ 1.373873] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.380841] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.389958] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.397411] usbcore: registered new interface driver pegasus [ 1.403136] usbcore: registered new interface driver asix [ 1.408585] usbcore: registered new interface driver ax88179_178a [ 1.414728] usbcore: registered new interface driver cdc_ether [ 1.420628] usbcore: registered new interface driver smsc75xx [ 1.426445] usbcore: registered new interface driver smsc95xx [ 1.432240] usbcore: registered new interface driver net1080 [ 1.437948] usbcore: registered new interface driver cdc_subset [ 1.443930] usbcore: registered new interface driver zaurus [ 1.449572] usbcore: registered new interface driver cdc_ncm [ 1.455453] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.462924] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.469463] ehci-pci: EHCI PCI platform driver [ 1.473958] ehci-platform: EHCI generic platform driver [ 1.479416] ehci-orion: EHCI orion driver [ 1.483573] SPEAr-ehci: EHCI SPEAr driver [ 1.487750] ehci-st: EHCI STMicroelectronics driver [ 1.492794] ehci-exynos: EHCI EXYNOS driver [ 1.497160] ehci-atmel: EHCI Atmel driver [ 1.501333] tegra-ehci: Tegra EHCI driver [ 1.508176] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.513607] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.521353] tegra-ehci 7d004000.usb: irq 352, io mem 0x7d004000 [ 1.538944] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.545689] hub 1-0:1.0: USB hub found [ 1.549498] hub 1-0:1.0: 1 port detected [ 1.554047] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.560241] ohci-pci: OHCI PCI platform driver [ 1.564744] ohci-platform: OHCI generic platform driver [ 1.570158] ohci-omap3: OHCI OMAP3 driver [ 1.574335] SPEAr-ohci: OHCI SPEAr driver [ 1.578492] ohci-st: OHCI STMicroelectronics driver [ 1.583529] ohci-atmel: OHCI Atmel driver [ 1.588366] usbcore: registered new interface driver usb-storage [ 1.596038] mousedev: PS/2 mouse device common for all mice [ 1.604936] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.611826] as3722-rtc as3722-rtc: RTC interrupt 375 [ 1.620218] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.627411] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.634207] i2c /dev entries driver [ 1.644890] 0-004c supply vcc not found, using dummy regulator [ 1.660635] sdhci: Secure Digital Host Controller Interface driver [ 1.666829] sdhci: Copyright(c) Pierre Ossman [ 1.672887] Synopsys Designware Multimedia Card Interface Driver [ 1.680095] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.686553] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.691463] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.696601] mmc0: Unknown controller version (3). You may experience problems. [ 1.703927] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.753944] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 1.763993] ledtrig-cpu: registered to indicate activity on CPUs [ 1.770354] usbcore: registered new interface driver usbhid [ 1.775938] usbhid: USB HID core driver [ 1.784649] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 1.802298] NET: Registered protocol family 10 [ 1.807659] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.814269] NET: Registered protocol family 17 [ 1.818714] can: controller area network core (rev 20120528 abi 9) [ 1.824981] NET: Registered protocol family 29 [ 1.829450] can: raw protocol (rev 20120528) [ 1.833713] can: broadcast manager protocol (rev 20160617 t) [ 1.839397] can: netlink gateway (rev 20130117) max_hops=1 [ 1.845254] Key type dns_resolver registered [ 1.850171] ThumbEE CPU extension supported. [ 1.854466] Registering SWP/SWPB emulation handler [ 1.862726] +3.3V_RUN: supplied by +3.3V_SYS [ 1.867896] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.874088] +USB0_VBUS_SW: supplied by +5V_SYS [ 1.879263] +5V_USB_HS: supplied by +5V_SYS [ 1.885009] +3.3V_LP0: supplied by +3.3V_SYS [ 1.891474] +5V_HDMI_CON: supplied by +5V_SYS [ 1.896783] +5V_SATA: supplied by +5V_SYS [ 1.901523] +12V_SATA: supplied by +VDD_MUX [ 1.907352] usb2-0 supply vbus not found, using dummy regulator [ 1.913542] usb2-1 supply vbus not found, using dummy regulator [ 1.920020] usb3-0 supply vbus not found, using dummy regulator [ 1.927318] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 1.934043] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 1.944121] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 1.952829] mmc0: new high speed MMC card at address 0001 [ 1.954482] as3722-sd2: supplied by +5V_SYS [ 1.954893] as3722-sd3: supplied by +5V_SYS [ 1.955236] as3722-sd4: supplied by +5V_SYS [ 1.955547] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.955636] as3722-sd5: supplied by +5V_SYS [ 1.957130] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.957634] as3722-ldo1: supplied by +3.3V_RUN [ 1.957966] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.958969] as3722-ldo3: supplied by +3.3V_SYS [ 1.959908] as3722-ldo4: supplied by +3.3V_SYS [ 1.960258] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.960585] as3722-ldo6: supplied by +3.3V_RUN [ 1.960942] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.961176] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.961587] as3722-ldo9: supplied by +5V_SYS [ 1.961979] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.962404] as3722-ldo10: supplied by +5V_SYS [ 1.962628] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.963053] as3722-ldo11: supplied by +3.3V_RUN [ 1.963285] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.975745] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 1.975758] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 1.977904] scsi host0: tegra-ahci [ 1.979360] scsi host1: tegra-ahci [ 1.979775] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 343 [ 1.979779] ata2: DUMMY [ 1.982992] tegra-ehci 7d008000.usb: EHCI Host Controller [ 1.983021] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 1.983235] tegra-ehci 7d008000.usb: irq 353, io mem 0x7d008000 [ 1.994066] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 1.995506] hub 2-0:1.0: USB hub found [ 1.995553] hub 2-0:1.0: 1 port detected [ 1.998570] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.998593] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.998810] mmc1: Unknown controller version (3). You may experience problems. [ 1.998968] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.044607] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 2.050774] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 2.055071] tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes [ 2.058036] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008 [ 2.088218] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes [ 2.090297] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000 [ 2.104370] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00 [ 2.104380] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.104391] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.104398] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.104405] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.104449] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 2.104580] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.104942] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 2.105064] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.105427] PCI: bus0: Fast back to back transfers disabled [ 2.105436] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.105454] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.105696] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 2.105751] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 2.105979] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 2.119095] PCI: bus1: Fast back to back transfers disabled [ 2.119109] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.119436] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 2.119474] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.119516] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.119544] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.119720] pci 0000:02:00.0: supports D1 D2 [ 2.119726] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.134104] PCI: bus2: Fast back to back transfers disabled [ 2.134118] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 2.134318] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 2.134329] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 2.134340] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 2.134349] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 2.134362] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 2.134399] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.134411] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 2.134432] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 2.134460] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 2.134487] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.134499] pci 0000:00:02.0: PCI bridge to [bus 02] [ 2.134507] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.134519] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 2.134528] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 2.134573] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 2.134693] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 2.134979] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 2.134985] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.134995] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 2.135115] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 2.135202] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 2.135445] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.135451] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.135461] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.135812] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.135837] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 2.150825] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0a46000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 393 [ 2.150834] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.154199] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.154204] [drm] No driver support for vblank timestamp query. [ 2.154267] drm drm: No connectors reported connected with modes [ 2.154276] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.296336] ata1: SATA link down (SStatus 0 SControl 300) [ 2.298165] mmc1: new high speed SDHC card at address aaaa [ 2.299970] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 2.310536] mmcblk1: p1 p2 p3 [ 2.585961] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 2.587002] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 2.587942] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 2.588844] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 2.591013] mmcblk0: p1 [ 2.593018] Console: switching to colour frame buffer device 128x48 [ 2.631715] drm drm: fb0: frame buffer device [ 2.654028] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.661493] of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19 [ 2.669573] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 2.676923] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 2.686048] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.693283] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:56 UTC (946684976) [ 2.706763] +USB0_VBUS_SW: disabling [ 2.710350] +1.8V_RUN_CAM: disabling [ 2.714170] +2.8V_RUN_CAM: disabling [ 2.717955] +1.2V_RUN_CAM_FRONT: disabling [ 2.722291] +1.05V_RUN_CAM_REAR: disabling [ 2.726626] +3.3V_RUN_TOUCH: disabling [ 2.730612] +2.8V_RUN_CAM_AF: disabling [ 2.734635] +1.8V_RUN_VPP_FUSE: disabling [ 2.740087] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 2.782466] EXT4-fs (mmcblk0p1): recovery complete [ 2.788302] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.796436] VFS: Mounted root (ext3 filesystem) on device 179:17. [ 2.806595] devtmpfs: mounted [ 2.810471] Freeing unused kernel memory: 2048K (c1100000 - c1300000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#