U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 3.7 MiB/s done Bytes transferred = 5409448 (528aa8 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 2.8 MiB/s done Bytes transferred = 66821 (10505 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x528aa8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013504 Starting kernel ... [ 3.135550] console [ttyS0] enabled [ 3.139026] bootconsole [earlycon0] disabled [ 3.144287] [drm] Initialized drm 1.1.0 20060810 [ 3.149317] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 3.155913] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 3.163220] panel supply power not found, using dummy regulator [ 3.174594] loop: module loaded [ 3.178375] as3722 4-0040: AS3722 with revision 0x1 found [ 3.188492] as3722-sd2: supplied by +5V_SYS [ 3.192994] as3722-sd3: supplied by +5V_SYS [ 3.197353] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 3.203614] as3722-sd4: supplied by +5V_SYS [ 3.207960] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 3.213785] as3722-sd5: supplied by +5V_SYS [ 3.219585] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 3.225415] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 3.231531] as3722-ldo2: supplied by +1.8V_VDDIO [ 3.237268] as3722-ldo3: supplied by +3.3V_SYS [ 3.241721] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 3.249385] as3722-ldo4: supplied by +3.3V_SYS [ 3.253982] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 3.260100] as3722-ldo5: supplied by +1.8V_VDDIO [ 3.264884] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 3.271666] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 3.277798] as3722-ldo7: supplied by +1.8V_VDDIO [ 3.282571] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 3.289222] as3722-ldo9: supplied by +5V_SYS [ 3.293794] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 3.300098] as3722-ldo10: supplied by +5V_SYS [ 3.304611] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 3.311148] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 3.361659] cros-ec-spi spi32766.0: Chrome EC device registered [ 3.371767] random: fast init done [ 3.377066] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 3.383460] libphy: Fixed MDIO Bus: probed [ 3.387565] CAN device driver interface [ 3.391422] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 3.398371] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.404042] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 3.411481] usbcore: registered new interface driver pegasus [ 3.417193] usbcore: registered new interface driver asix [ 3.422617] usbcore: registered new interface driver ax88179_178a [ 3.428752] usbcore: registered new interface driver cdc_ether [ 3.434634] usbcore: registered new interface driver smsc75xx [ 3.440418] usbcore: registered new interface driver smsc95xx [ 3.446204] usbcore: registered new interface driver net1080 [ 3.451886] usbcore: registered new interface driver cdc_subset [ 3.457836] usbcore: registered new interface driver zaurus [ 3.463452] usbcore: registered new interface driver cdc_ncm [ 3.469210] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.475727] ehci-pci: EHCI PCI platform driver [ 3.480199] tegra-ehci: Tegra EHCI driver [ 3.484530] usbcore: registered new interface driver cdc_acm [ 3.490180] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 3.498210] usbcore: registered new interface driver cdc_wdm [ 3.503911] usbcore: registered new interface driver usb-storage [ 3.510176] mousedev: PS/2 mouse device common for all mice [ 3.516053] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi32766/spi32766.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 3.530994] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 3.537861] as3722-rtc as3722-rtc: RTC interrupt 370 [ 3.544691] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 3.551840] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 3.558148] i2c /dev entries driver [ 3.562394] usbcore: registered new interface driver uvcvideo [ 3.568132] USB Video Class driver (1.1.1) [ 3.572214] gspca_main: v2.14.0 registered [ 3.576598] 0-004c supply vcc not found, using dummy regulator [ 3.584369] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 3.592788] sdhci: Secure Digital Host Controller Interface driver [ 3.598963] sdhci: Copyright(c) Pierre Ossman [ 3.603305] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.609097] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 3.614897] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 3.619768] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 3.624792] mmc0: Unknown controller version (3). You may experience problems. [ 3.632025] mmc0: Invalid maximum block size, assuming 512 bytes [ 3.694645] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 3.705089] usbcore: registered new interface driver usbhid [ 3.713570] usbhid: USB HID core driver [ 3.724664] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 3.765098] max98090 0-0010: MAX98090 REVID=0x43 [ 3.772386] max98090 0-0010: use default 2.8v micbias [ 3.775049] mmc0: new high speed MMC card at address 0001 [ 3.775517] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 3.775711] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 3.775906] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 3.776066] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 3.779257] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 3.813169] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 3.820956] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 3.829072] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 4.124617] NET: Registered protocol family 10 [ 4.294625] mip6: Mobile IPv6 [ 4.297585] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.304539] NET: Registered protocol family 17 [ 4.308994] NET: Registered protocol family 15 [ 4.313423] can: controller area network core (rev 20120528 abi 9) [ 4.354650] NET: Registered protocol family 29 [ 4.359082] can: raw protocol (rev 20120528) [ 4.363339] can: broadcast manager protocol (rev 20160617 t) [ 4.368995] can: netlink gateway (rev 20130117) max_hops=1 [ 4.404657] Bluetooth: RFCOMM socket layer initialized [ 4.409790] Bluetooth: RFCOMM ver 1.11 [ 4.413531] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.418864] Bluetooth: BNEP socket layer initialized [ 4.423814] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.429728] Bluetooth: HIDP socket layer initialized [ 4.434832] Key type dns_resolver registered [ 4.439547] Registering SWP/SWPB emulation handler [ 4.455623] +3.3V_RUN: supplied by +3.3V_SYS [ 4.460407] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 4.466107] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 4.470758] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 4.475521] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 4.480766] +VDD_LED: supplied by +VDD_MUX [ 4.485787] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3 [ 4.494503] +5V_VDD_TS_SW: supplied by +5V_SYS [ 4.499402] +5V_USB_HS: supplied by +5V_SYS [ 4.503800] +5V_USB_SS: supplied by +5V_SYS [ 4.508792] +3.3V_PANEL: supplied by +3.3V_RUN [ 4.513811] +3.3V_LP0: supplied by +3.3V_SYS [ 4.518691] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 4.524567] +5V_HDMI_CON: supplied by +5V_SYS [ 4.530047] usb3-0 supply vbus not found, using dummy regulator [ 4.536045] usb3-1 supply vbus not found, using dummy regulator [ 4.544531] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.550708] panel supply power not found, using dummy regulator [ 4.625326] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 4.632735] tegra-xusb 70090000.usb: xHCI Host Controller [ 4.638174] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 4.647759] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 4.656399] tegra-xusb 70090000.usb: irq 342, io mem 0x70090000 [ 4.663134] hub 1-0:1.0: USB hub found [ 4.666988] hub 1-0:1.0: 6 ports detected [ 4.671733] tegra-xusb 70090000.usb: xHCI Host Controller [ 4.677174] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 4.684849] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.693755] hub 2-0:1.0: USB hub found [ 4.697594] hub 2-0:1.0: 2 ports detected [ 4.702838] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 4.708730] mmc1: Unknown controller version (3). You may experience problems. [ 4.716029] mmc1: Invalid maximum block size, assuming 512 bytes [ 4.722583] mmc1: Switching to 3.3V signalling voltage failed [ 4.784735] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit [ 4.792977] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 4.799910] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 4.807884] mmc2: Unknown controller version (3). You may experience problems. [ 4.815246] mmc2: Invalid maximum block size, assuming 512 bytes [ 4.851900] mmc1: new high speed SDIO card at address 0001 [ 4.884792] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 4.990221] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.996849] [drm] No driver support for vblank timestamp query. [ 5.034646] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 5.036988] mmc2: new high speed SDHC card at address 0007 [ 5.047734] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 5.059173] Console: switching to colour frame buffer device 170x48 [ 5.079806] GPT:Primary header alternate_lba != Alt. header my_lba [ 5.079810] GPT:3014591 != 15564799 [ 5.079812] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 5.079813] GPT:3014591 != 15564799 [ 5.079814] GPT: Use GNU Parted to correct GPT errors. [ 5.079840] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 5.118978] drm drm: fb0: frame buffer device [ 5.184737] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.191178] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 5.198571] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:24:23 UTC (946686263) [ 5.212918] +1.8V_RUN_CAM: disabling [ 5.216747] +1.2V_RUN_CAM_FRONT: disabling [ 5.221046] +1.05V_RUN_CAM_REAR: disabling [ 5.225376] +2.8V_RUN_TOUCH: disabling [ 5.229329] +2.8V_RUN_CAM_AF: disabling [ 5.233325] +1.8V_RUN_VPP_FUSE: disabling [ 5.237515] +5V_VDD_TS_SW: disabling [ 5.241271] ALSA device list: [ 5.244230] #0: tegra-hda at 0x70038000 irq 341 [ 5.248953] #1: GoogleNyanBig [ 5.252885] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 5.344977] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 5.359940] input: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 5.384953] EXT4-fs (mmcblk0p3): recovery complete [ 5.390710] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 5.398860] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 5.406105] devtmpfs: mounted [ 5.409512] Freeing unused kernel memory: 1024K (c0c00000 - c0d00000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 5.704697] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 6.777521] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 7.124708] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 7.303104] usb-storage 1-1:1.0: USB Mass Storage device detected [ 7.310024] scsi host0: usb-storage 1-1:1.0 [ 7.384802] scsi host0: runtime PM trying to activate child device host0 but parent (1-1:1.0) is not active [ 8.406533] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 8.579492] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 8.588352] sd 0:0:0:0: [sda] Write Protect is off [ 8.593136] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 8.599325] sd 0:0:0:0: [sda] No Caching mode page found [ 8.604656] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 8.630555] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 8.643224] sd 0:0:0:0: [sda] Attached SCSI removable disk mount -t sysfs none /sys root@(none):/# root@(none):/# mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:52 1970 [ 31.905471] PM: Syncing filesystems ... done. [ 31.915704] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 31.923861] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 31.933547] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 31.942240] Suspending console(s) (use no_console_suspend to debug) [ 32.166069] PM: suspend of devices complete after 216.959 msecs [ 32.167701] PM: late suspend of devices complete after 1.622 msecs [ 32.168534] PM: noirq suspend of devices complete after 0.828 msecs [ 32.168535] Disabling non-boot CPUs ... [ 32.224968] CPU1: shutdown [ 32.304861] IRQ17 no longer affine to CPU2 [ 32.305039] CPU2: shutdown [ 32.384929] CPU3: shutdown [ 32.435434] Entering suspend state LP1 [ 32.435460] Enabling non-boot CPUs ... [ 32.495823] CPU1 is up [ 32.555971] CPU2 is up [ 32.616213] CPU3 is up [ 32.616752] PM: noirq resume of devices complete after 0.535 msecs [ 32.618233] PM: early resume of devices complete after 0.972 msecs [ 32.659957] mmc1: Switching to 3.3V signalling voltage failed [ 32.914601] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 32.931308] PM: resume of devices complete after 313.069 msecs [ 33.010729] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:57 1970 [ 34.255416] PM: Syncing filesystems ... done. [ 34.264960] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 34.273137] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 34.282795] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 34.291445] Suspending console(s) (use no_console_suspend to debug) [ 34.515989] PM: suspend of devices complete after 217.671 msecs [ 34.516894] PM: late suspend of devices complete after 0.901 msecs [ 34.517731] PM: noirq suspend of devices complete after 0.834 msecs [ 34.517733] Disabling non-boot CPUs ... [ 34.554949] CPU1: shutdown [ 34.654936] CPU2: shutdown [ 34.754906] CPU3: shutdown [ 34.805403] Entering suspend state LP1 [ 34.805430] Enabling non-boot CPUs ... [ 34.865807] CPU1 is up [ 34.925964] CPU2 is up [ 34.986194] CPU3 is up [ 34.986754] PM: noirq resume of devices complete after 0.555 msecs [ 34.988297] PM: early resume of devices complete after 1.055 msecs [ 35.029752] mmc1: Switching to 3.3V signalling voltage failed [ 35.284649] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 35.300808] PM: resume of devices complete after 312.505 msecs [ 35.376116] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:02 1970 [ 36.625394] PM: Syncing filesystems ... done. [ 36.635102] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 36.643288] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 36.652950] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 36.661608] Suspending console(s) (use no_console_suspend to debug) [ 36.885965] PM: suspend of devices complete after 217.484 msecs [ 36.886878] PM: late suspend of devices complete after 0.909 msecs [ 36.887712] PM: noirq suspend of devices complete after 0.831 msecs [ 36.887714] Disabling non-boot CPUs ... [ 36.924928] CPU1: shutdown [ 37.024915] CPU2: shutdown [ 37.134877] CPU3: shutdown [ 37.185384] Entering suspend state LP1 [ 37.185411] Enabling non-boot CPUs ... [ 37.245787] CPU1 is up [ 37.305938] CPU2 is up [ 37.366166] CPU3 is up [ 37.366770] PM: noirq resume of devices complete after 0.600 msecs [ 37.368549] PM: early resume of devices complete after 1.270 msecs [ 37.409612] mmc1: Switching to 3.3V signalling voltage failed [ 37.664554] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 37.680865] PM: resume of devices complete after 312.311 msecs [ 37.756177] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:07 1970 [ 39.005350] PM: Syncing filesystems ... done. [ 39.015006] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 39.023198] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 39.032862] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 39.041526] Suspending console(s) (use no_console_suspend to debug) [ 39.265973] PM: suspend of devices complete after 217.558 msecs [ 39.267237] PM: late suspend of devices complete after 1.254 msecs [ 39.268031] PM: noirq suspend of devices complete after 0.790 msecs [ 39.268033] Disabling non-boot CPUs ... [ 39.304901] CPU1: shutdown [ 39.404892] CPU2: shutdown [ 39.504852] CPU3: shutdown [ 39.555360] Entering suspend state LP1 [ 39.555387] Enabling non-boot CPUs ... [ 39.615765] CPU1 is up [ 39.675920] CPU2 is up [ 39.736144] CPU3 is up [ 39.736693] PM: noirq resume of devices complete after 0.544 msecs [ 39.738386] PM: early resume of devices complete after 1.189 msecs [ 39.779720] mmc1: Switching to 3.3V signalling voltage failed [ 40.034515] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 40.050757] PM: resume of devices complete after 312.366 msecs [ 40.126226] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:12 1970 [ 41.375343] PM: Syncing filesystems ... done. [ 41.385059] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 41.393253] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 41.402919] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 41.411583] Suspending console(s) (use no_console_suspend to debug) [ 41.635914] PM: suspend of devices complete after 217.456 msecs [ 41.636821] PM: late suspend of devices complete after 0.903 msecs [ 41.637655] PM: noirq suspend of devices complete after 0.830 msecs [ 41.637657] Disabling non-boot CPUs ... [ 41.674883] CPU1: shutdown [ 41.774859] CPU2: shutdown [ 41.874830] CPU3: shutdown [ 41.925343] Entering suspend state LP1 [ 41.925370] Enabling non-boot CPUs ... [ 41.985748] CPU1 is up [ 42.045893] CPU2 is up [ 42.106131] CPU3 is up [ 42.106669] PM: noirq resume of devices complete after 0.533 msecs [ 42.108415] PM: early resume of devices complete after 1.239 msecs [ 42.149604] mmc1: Switching to 3.3V signalling voltage failed [ 42.334753] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 42.404524] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 42.510755] PM: resume of devices complete after 402.331 msecs [ 42.592976] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:17 1970 [ 43.745321] PM: Syncing filesystems ... done. [ 43.754883] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 43.763077] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 43.772743] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 43.781409] Suspending console(s) (use no_console_suspend to debug) [ 44.005888] PM: suspend of devices complete after 217.606 msecs [ 44.006792] PM: late suspend of devices complete after 0.900 msecs [ 44.007626] PM: noirq suspend of devices complete after 0.831 msecs [ 44.007628] Disabling non-boot CPUs ... [ 44.044858] CPU1: shutdown [ 44.154832] CPU2: shutdown [ 44.264805] CPU3: shutdown [ 44.315306] Entering suspend state LP1 [ 44.315332] Enabling non-boot CPUs ... [ 44.375723] CPU1 is up [ 44.435868] CPU2 is up [ 44.496097] CPU3 is up [ 44.496632] PM: noirq resume of devices complete after 0.530 msecs [ 44.498474] PM: early resume of devices complete after 1.329 msecs [ 44.539315] mmc1: Switching to 3.3V signalling voltage failed [ 44.794529] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 44.810533] PM: resume of devices complete after 312.054 msecs [ 44.885854] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:22 1970 [ 46.135252] PM: Syncing filesystems ... done. [ 46.144795] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 46.152997] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 46.162663] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 46.171387] Suspending console(s) (use no_console_suspend to debug) [ 46.395867] PM: suspend of devices complete after 217.607 msecs [ 46.396780] PM: late suspend of devices complete after 0.909 msecs [ 46.397615] PM: noirq suspend of devices complete after 0.832 msecs [ 46.397617] Disabling non-boot CPUs ... [ 46.434831] CPU1: shutdown [ 46.534825] CPU2: shutdown [ 46.634780] CPU3: shutdown [ 46.685279] Entering suspend state LP1 [ 46.685305] Enabling non-boot CPUs ... [ 46.745692] CPU1 is up [ 46.805846] CPU2 is up [ 46.866067] CPU3 is up [ 46.866603] PM: noirq resume of devices complete after 0.532 msecs [ 46.868180] PM: early resume of devices complete after 1.067 msecs [ 46.919897] mmc1: Switching to 3.3V signalling voltage failed [ 47.174538] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 47.190949] PM: resume of devices complete after 322.763 msecs [ 47.266272] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:27 1970 [ 48.505175] PM: Syncing filesystems ... done. [ 48.514851] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 48.523051] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 48.532719] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 48.541437] Suspending console(s) (use no_console_suspend to debug) [ 48.755894] PM: suspend of devices complete after 207.594 msecs [ 48.756875] PM: late suspend of devices complete after 0.972 msecs [ 48.757745] PM: noirq suspend of devices complete after 0.866 msecs [ 48.757747] Disabling non-boot CPUs ... [ 48.794820] CPU1: shutdown [ 48.894797] CPU2: shutdown [ 49.004753] CPU3: shutdown [ 49.055256] Entering suspend state LP1 [ 49.055283] Enabling non-boot CPUs ... [ 49.115694] CPU1 is up [ 49.175820] CPU2 is up [ 49.236046] CPU3 is up [ 49.236574] PM: noirq resume of devices complete after 0.523 msecs [ 49.238352] PM: early resume of devices complete after 1.264 msecs [ 49.289851] mmc1: Switching to 3.3V signalling voltage failed [ 49.544480] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 49.560968] PM: resume of devices complete after 322.611 msecs [ 49.636283] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:32 1970 [ 50.875241] PM: Syncing filesystems ... done. [ 50.884797] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 50.892994] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 50.902661] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 50.911292] Suspending console(s) (use no_console_suspend to debug) [ 51.125864] PM: suspend of devices complete after 207.719 msecs [ 51.126777] PM: late suspend of devices complete after 0.910 msecs [ 51.127608] PM: noirq suspend of devices complete after 0.828 msecs [ 51.127610] Disabling non-boot CPUs ... [ 51.164787] CPU1: shutdown [ 51.274757] CPU2: shutdown [ 51.384729] CPU3: shutdown [ 51.435243] Entering suspend state LP1 [ 51.435269] Enabling non-boot CPUs ... [ 51.495648] CPU1 is up [ 51.555794] CPU2 is up [ 51.616023] CPU3 is up [ 51.616554] PM: noirq resume of devices complete after 0.526 msecs [ 51.618453] PM: early resume of devices complete after 1.409 msecs [ 51.659330] mmc1: Switching to 3.3V signalling voltage failed [ 51.844773] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 51.914479] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 52.021338] PM: resume of devices complete after 402.876 msecs [ 52.103679] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:37 1970 [ 53.255229] PM: Syncing filesystems ... done. [ 53.264797] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 53.272989] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 53.282655] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 53.291216] Suspending console(s) (use no_console_suspend to debug) [ 53.515790] PM: suspend of devices complete after 217.698 msecs [ 53.516698] PM: late suspend of devices complete after 0.903 msecs [ 53.517530] PM: noirq suspend of devices complete after 0.829 msecs [ 53.517532] Disabling non-boot CPUs ... [ 53.554758] CPU1: shutdown [ 53.664732] CPU2: shutdown [ 53.764709] CPU3: shutdown [ 53.815207] Entering suspend state LP1 [ 53.815233] Enabling non-boot CPUs ... [ 53.875616] CPU1 is up [ 53.935770] CPU2 is up [ 53.995995] CPU3 is up [ 53.996522] PM: noirq resume of devices complete after 0.522 msecs [ 53.998155] PM: early resume of devices complete after 1.114 msecs [ 54.040053] mmc1: Switching to 3.3V signalling voltage failed [ 54.224626] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 54.294399] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 54.400890] PM: resume of devices complete after 402.726 msecs [ 54.483117] Restarting tasks ... done. root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE