U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.multi_v7_defconfig Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################# 3.9 MiB/s done Bytes transferred = 7092008 (6c3728 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.7 MiB/s done Bytes transferred = 66621 (1043d hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6c3728 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 8301343c Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.8.0-rc2-109794-g694d0d0 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Aug 16 02:33:34 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c141cf40, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 14 pages/cpu @eef85000 s26496 r8192 d22656 u57344 [ 0.000000] pcpu-alloc: s26496 r8192 d22656 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1994976K/2096128K available (9216K kernel code, 1147K rwdata, 3968K rodata, 2048K init, 343K bss, 35616K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0c00000 (10208 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc141edc0 (1148 kB) [ 0.000000] .bss : 0xc1420000 - 0xc1475c88 ( 344 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000029] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000043] Switching to timer-based delay loop, resolution 1000ns [ 0.005305] arm_arch_timer: Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.005323] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.005341] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.005354] Switching to timer-based delay loop, resolution 83ns [ 0.005871] Console: colour dummy device 80x30 [ 0.005899] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000) [ 0.005913] pid_max: default: 32768 minimum: 301 [ 0.006009] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006020] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006620] CPU: Testing write buffer coherency: ok [ 0.006841] /cpus/cpu@0 missing clock-frequency property [ 0.006881] /cpus/cpu@1 missing clock-frequency property [ 0.006922] /cpus/cpu@2 missing clock-frequency property [ 0.006963] /cpus/cpu@3 missing clock-frequency property [ 0.006975] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006997] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.010672] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.012123] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.015817] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.020815] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.025268] Brought up 4 CPUs [ 0.025288] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.025295] CPU: All CPU(s) started in SVC mode. [ 0.026776] devtmpfs: initialized [ 0.047354] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.047782] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.049135] pinctrl core: initialized pinctrl subsystem [ 0.050913] NET: Registered protocol family 16 [ 0.052839] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.065427] cpuidle: using governor menu [ 0.084198] No ATAGs? [ 0.084225] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.084235] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.090543] Serial: AMBA PL011 UART driver [ 0.125548] +5V_SYS: supplied by +VDD_MUX [ 0.125873] +3.3V_SYS: supplied by +VDD_MUX [ 0.126515] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.126530] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.126619] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.126632] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.126796] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.126809] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.126894] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.126906] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.126990] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.127002] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.127084] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.127096] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.130377] vgaarb: loaded [ 0.131211] SCSI subsystem initialized [ 0.131379] libata version 3.00 loaded. [ 0.131653] usbcore: registered new interface driver usbfs [ 0.131720] usbcore: registered new interface driver hub [ 0.131783] usbcore: registered new device driver usb [ 0.135406] pps_core: LinuxPPS API ver. 1 registered [ 0.135416] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.135439] PTP clock support registered [ 0.135665] EDAC MC: Ver: 3.0.0 [ 0.138882] clocksource: Switched to clocksource arch_sys_counter [ 0.150235] NET: Registered protocol family 2 [ 0.150736] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.150835] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.151022] TCP: Hash tables configured (established 8192 bind 8192) [ 0.151076] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.151117] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.151282] NET: Registered protocol family 1 [ 0.151610] RPC: Registered named UNIX socket transport module. [ 0.151620] RPC: Registered udp transport module. [ 0.151627] RPC: Registered tcp transport module. [ 0.151634] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.151645] PCI: CLS 0 bytes, default 64 [ 0.152815] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.154346] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.155069] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.166666] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.167521] NFS: Registering the id_resolver key type [ 0.167542] Key type id_resolver registered [ 0.167550] Key type id_legacy registered [ 0.167591] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.168916] bounce: pool size: 64 pages [ 0.169127] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.169137] io scheduler noop registered [ 0.169145] io scheduler deadline registered [ 0.169345] io scheduler cfq registered (default) [ 0.175097] usb2-0 supply vbus not found, using dummy regulator [ 0.175224] usb2-1 supply vbus not found, using dummy regulator [ 0.175618] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.176327] libphy: mdio_driver_register: phy-bcm-ns2-pci [ 0.192351] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 0.192405] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 0.199782] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.201570] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 0.268306] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.271250] console [ttyS0] disabled [ 0.271316] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 333, base_baud = 25500000) is a Tegra [ 1.129487] console [ttyS0] enabled [ 1.133946] SuperH (H)SCI(F) driver initialized [ 1.139551] msm_serial: driver initialized [ 1.143838] STMicroelectronics ASC driver initialized [ 1.149797] serial-tegra serial@0,70006000: failed to get alias id, errno -19 [ 1.156990] serial-tegra serial@0,70006040: failed to get alias id, errno -19 [ 1.167266] [drm] Initialized drm 1.1.0 20060810 [ 1.175174] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.195065] brd: module loaded [ 1.204343] loop: module loaded [ 1.207908] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.216197] as3722 4-0040: AS3722 with revision 0x1 found [ 1.227530] as3722-sd2: supplied by +5V_SYS [ 1.232195] as3722-sd3: supplied by +5V_SYS [ 1.236613] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.243009] as3722-sd4: supplied by +5V_SYS [ 1.247665] as3722-sd5: supplied by +5V_SYS [ 1.253750] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.259880] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.266137] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.272066] as3722-ldo3: supplied by +3.3V_SYS [ 1.276575] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.284402] as3722-ldo4: supplied by +3.3V_SYS [ 1.289084] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.295345] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.300194] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.307174] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.312849] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.319041] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.331543] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.352228] random: fast init done [ 1.355778] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.364356] libphy: Fixed MDIO Bus: probed [ 1.369325] CAN device driver interface [ 1.375483] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.382450] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.391541] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.398999] usbcore: registered new interface driver pegasus [ 1.404726] usbcore: registered new interface driver asix [ 1.410176] usbcore: registered new interface driver ax88179_178a [ 1.416320] usbcore: registered new interface driver cdc_ether [ 1.422228] usbcore: registered new interface driver smsc75xx [ 1.428044] usbcore: registered new interface driver smsc95xx [ 1.433840] usbcore: registered new interface driver net1080 [ 1.439551] usbcore: registered new interface driver cdc_subset [ 1.445519] usbcore: registered new interface driver zaurus [ 1.451164] usbcore: registered new interface driver cdc_ncm [ 1.457043] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.464512] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.471048] ehci-pci: EHCI PCI platform driver [ 1.475545] ehci-platform: EHCI generic platform driver [ 1.481009] ehci-orion: EHCI orion driver [ 1.485181] SPEAr-ehci: EHCI SPEAr driver [ 1.489357] ehci-st: EHCI STMicroelectronics driver [ 1.494399] ehci-exynos: EHCI EXYNOS driver [ 1.498745] ehci-atmel: EHCI Atmel driver [ 1.502916] tegra-ehci: Tegra EHCI driver [ 1.509759] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.515187] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.522930] tegra-ehci 7d004000.usb: irq 352, io mem 0x7d004000 [ 1.543909] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.550673] hub 1-0:1.0: USB hub found [ 1.554475] hub 1-0:1.0: 1 port detected [ 1.559012] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.565208] ohci-pci: OHCI PCI platform driver [ 1.569715] ohci-platform: OHCI generic platform driver [ 1.575139] ohci-omap3: OHCI OMAP3 driver [ 1.579318] SPEAr-ohci: OHCI SPEAr driver [ 1.583476] ohci-st: OHCI STMicroelectronics driver [ 1.588515] ohci-atmel: OHCI Atmel driver [ 1.593366] usbcore: registered new interface driver usb-storage [ 1.601160] mousedev: PS/2 mouse device common for all mice [ 1.610187] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.617074] as3722-rtc as3722-rtc: RTC interrupt 375 [ 1.625452] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.632648] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.639454] i2c /dev entries driver [ 1.650349] 0-004c supply vcc not found, using dummy regulator [ 1.666089] sdhci: Secure Digital Host Controller Interface driver [ 1.672284] sdhci: Copyright(c) Pierre Ossman [ 1.678342] Synopsys Designware Multimedia Card Interface Driver [ 1.685557] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.692025] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.696935] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.702072] mmc0: Unknown controller version (3). You may experience problems. [ 1.709394] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.758907] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 1.769020] ledtrig-cpu: registered to indicate activity on CPUs [ 1.775387] usbcore: registered new interface driver usbhid [ 1.780969] usbhid: USB HID core driver [ 1.789695] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 1.807409] NET: Registered protocol family 10 [ 1.812769] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.819467] NET: Registered protocol family 17 [ 1.823933] can: controller area network core (rev 20120528 abi 9) [ 1.830187] NET: Registered protocol family 29 [ 1.834638] can: raw protocol (rev 20120528) [ 1.838920] can: broadcast manager protocol (rev 20160617 t) [ 1.844589] can: netlink gateway (rev 20130117) max_hops=1 [ 1.850443] Key type dns_resolver registered [ 1.855354] ThumbEE CPU extension supported. [ 1.859646] Registering SWP/SWPB emulation handler [ 1.867534] +3.3V_RUN: supplied by +3.3V_SYS [ 1.872939] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.879183] +USB0_VBUS_SW: supplied by +5V_SYS [ 1.884382] +5V_USB_HS: supplied by +5V_SYS [ 1.890086] +3.3V_LP0: supplied by +3.3V_SYS [ 1.896558] +5V_HDMI_CON: supplied by +5V_SYS [ 1.901867] +5V_SATA: supplied by +5V_SYS [ 1.906594] +12V_SATA: supplied by +VDD_MUX [ 1.912436] usb2-0 supply vbus not found, using dummy regulator [ 1.918559] usb2-1 supply vbus not found, using dummy regulator [ 1.925026] usb3-0 supply vbus not found, using dummy regulator [ 1.932346] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 1.939045] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 1.949529] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 1.955753] mmc0: new high speed MMC card at address 0001 [ 1.959622] as3722-sd2: supplied by +5V_SYS [ 1.960005] as3722-sd3: supplied by +5V_SYS [ 1.960345] as3722-sd4: supplied by +5V_SYS [ 1.960665] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.960763] as3722-sd5: supplied by +5V_SYS [ 1.962247] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.962749] as3722-ldo1: supplied by +3.3V_RUN [ 1.963096] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.964099] as3722-ldo3: supplied by +3.3V_SYS [ 1.965050] as3722-ldo4: supplied by +3.3V_SYS [ 1.965412] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.965760] as3722-ldo6: supplied by +3.3V_RUN [ 1.966106] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.966642] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.967194] as3722-ldo9: supplied by +5V_SYS [ 1.967594] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.968010] as3722-ldo10: supplied by +5V_SYS [ 1.968233] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.968669] as3722-ldo11: supplied by +3.3V_RUN [ 1.968955] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.980404] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 1.980416] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 1.982573] scsi host0: tegra-ahci [ 1.984284] scsi host1: tegra-ahci [ 1.984735] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 343 [ 1.984740] ata2: DUMMY [ 1.988325] tegra-ehci 7d008000.usb: EHCI Host Controller [ 1.988361] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 1.988586] tegra-ehci 7d008000.usb: irq 353, io mem 0x7d008000 [ 1.999036] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.000488] hub 2-0:1.0: USB hub found [ 2.000536] hub 2-0:1.0: 1 port detected [ 2.003584] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.003606] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.003818] mmc1: Unknown controller version (3). You may experience problems. [ 2.003980] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.049549] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 2.055694] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 2.060020] tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes [ 2.062986] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008 [ 2.093185] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes [ 2.095267] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000 [ 2.109335] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00 [ 2.109347] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.109354] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.109362] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.109369] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.109413] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 2.109548] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.109915] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 2.110032] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.110392] PCI: bus0: Fast back to back transfers disabled [ 2.110402] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.110420] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.110675] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 2.110729] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 2.110957] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 2.124061] PCI: bus1: Fast back to back transfers disabled [ 2.124076] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.124406] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 2.124443] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 2.124486] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 2.124514] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.124694] pci 0000:02:00.0: supports D1 D2 [ 2.124700] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 2.139064] PCI: bus2: Fast back to back transfers disabled [ 2.139079] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 2.139275] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 2.139287] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 2.139300] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 2.139308] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 2.139322] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 2.139361] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.139374] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 2.139394] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 2.139422] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 2.139450] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.139462] pci 0000:00:02.0: PCI bridge to [bus 02] [ 2.139470] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.139480] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 2.139489] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 2.139534] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 2.139654] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 2.139944] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 2.139949] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.139961] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 2.140079] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 2.140171] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 2.140421] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.140427] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.140438] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded [ 2.140776] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.140801] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 2.155793] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0a46000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 393 [ 2.155802] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.159300] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.159305] [drm] No driver support for vblank timestamp query. [ 2.159357] drm drm: No connectors reported connected with modes [ 2.159365] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.301393] ata1: SATA link down (SStatus 0 SControl 300) [ 2.303123] mmc1: new high speed SDHC card at address aaaa [ 2.304361] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 2.315004] mmcblk1: p1 p2 p3 [ 2.589128] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 2.590248] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 2.591334] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 2.592264] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 2.594402] mmcblk0: p1 [ 2.596047] Console: switching to colour frame buffer device 128x48 [ 2.634643] drm drm: fb0: frame buffer device [ 2.658992] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.666449] of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19 [ 2.674533] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 2.681882] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 2.691009] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.698242] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:13 UTC (946684813) [ 2.711714] +USB0_VBUS_SW: disabling [ 2.715300] +1.8V_RUN_CAM: disabling [ 2.719122] +2.8V_RUN_CAM: disabling [ 2.722909] +1.2V_RUN_CAM_FRONT: disabling [ 2.727247] +1.05V_RUN_CAM_REAR: disabling [ 2.731583] +3.3V_RUN_TOUCH: disabling [ 2.735572] +2.8V_RUN_CAM_AF: disabling [ 2.739595] +1.8V_RUN_VPP_FUSE: disabling [ 2.744936] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 2.766990] EXT4-fs (mmcblk0p1): recovery complete [ 2.771808] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.779912] VFS: Mounted root (ext3 filesystem) on device 179:17. [ 2.790281] devtmpfs: mounted [ 2.794165] Freeing unused kernel memory: 2048K (c1100000 - c1300000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# mount -t sysfs none /sys root@(none):/# root@(none):/# mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:18 1970 [ 5.487905] PM: Syncing filesystems ... done. [ 5.520364] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.529158] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 5.539179] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.548734] Suspending console(s) (use no_console_suspend to debug) [ 5.625797] PM: suspend of devices complete after 66.757 msecs [ 5.628311] PM: late suspend of devices complete after 2.500 msecs [ 5.645403] PM: noirq suspend of devices complete after 17.082 msecs [ 5.645407] Disabling non-boot CPUs ... [ 5.646118] CPU1: shutdown [ 5.675864] IRQ17 no longer affine to CPU2 [ 5.676233] CPU2: shutdown [ 5.695923] CPU3: shutdown [ 5.719959] Entering suspend state LP1 [ 5.719974] Enabling non-boot CPUs ... [ 5.749722] CPU1 is up [ 5.779776] CPU2 is up [ 5.809918] CPU3 is up [ 5.810650] pcieport 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 5.810717] pcieport 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 5.828977] PM: noirq resume of devices complete after 19.053 msecs [ 5.830385] PM: early resume of devices complete after 1.074 msecs [ 5.858999] PM: resume of devices complete after 28.604 msecs [ 5.941653] Restarting tasks ... done. root@(none):/# root@(none):/# [ 6.146673] ata1: SATA link down (SStatus 0 SControl 300) rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:23 1970 [ 7.130806] PM: Syncing filesystems ... done. [ 7.162090] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.171068] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 7.181063] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.190575] Suspending console(s) (use no_console_suspend to debug) [ 7.271494] PM: suspend of devices complete after 70.671 msecs [ 7.280367] PM: late suspend of devices complete after 8.836 msecs [ 7.304052] PM: noirq suspend of devices complete after 23.654 msecs [ 7.304062] Disabling non-boot CPUs ... [ 7.306452] CPU1: shutdown [ 7.346431] CPU2: shutdown [ 7.370496] CPU3: shutdown [ 7.392638] Entering suspend state LP1 [ 7.392653] Enabling non-boot CPUs ... [ 7.419710] CPU1 is up [ 7.449751] CPU2 is up [ 7.479890] CPU3 is up [ 7.480634] pcieport 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 7.480636] pcieport 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 7.498947] PM: noirq resume of devices complete after 19.051 msecs [ 7.500531] PM: early resume of devices complete after 1.259 msecs [ 7.529376] PM: resume of devices complete after 28.836 msecs [ 7.608054] Restarting tasks ... done. root@(none):/# root@(none):/# [ 7.821659] ata1: SATA link down (SStatus 0 SControl 300) rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:28 1970 [ 8.815021] PM: Syncing filesystems ... done. [ 8.847641] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8.856628] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 8.866631] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8.876154] Suspending console(s) (use no_console_suspend to debug) [ 8.956555] PM: suspend of devices complete after 70.145 msecs [ 8.963773] PM: late suspend of devices complete after 7.181 msecs [ 8.989122] PM: noirq suspend of devices complete after 25.322 msecs [ 8.989132] Disabling non-boot CPUs ... [ 8.991478] CPU1: shutdown [ 9.031406] CPU2: shutdown [ 9.055557] CPU3: shutdown [ 9.077562] Entering suspend state LP1 [ 9.077577] Enabling non-boot CPUs ... [ 9.104675] CPU1 is up [ 9.134718] CPU2 is up [ 9.164857] CPU3 is up [ 9.165541] pcieport 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 9.165604] pcieport 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 9.183904] PM: noirq resume of devices complete after 19.040 msecs [ 9.184987] PM: early resume of devices complete after 0.768 msecs [ 9.213996] PM: resume of devices complete after 29.000 msecs [ 9.292547] Restarting tasks ... done. root@(none):/# root@(none):/# [ 9.501596] ata1: SATA link down (SStatus 0 SControl 300) rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:33 1970 [ 10.480591] PM: Syncing filesystems ... done. [ 10.511046] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.520020] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 10.530103] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.539680] Suspending console(s) (use no_console_suspend to debug) [ 10.621239] PM: suspend of devices complete after 71.323 msecs [ 10.628184] PM: late suspend of devices complete after 6.909 msecs [ 10.654019] PM: noirq suspend of devices complete after 25.808 msecs [ 10.654029] Disabling non-boot CPUs ... [ 10.656394] CPU1: shutdown [ 10.696403] CPU2: shutdown [ 10.720476] CPU3: shutdown [ 10.742514] Entering suspend state LP1 [ 10.742529] Enabling non-boot CPUs ... [ 10.769643] CPU1 is up [ 10.799690] CPU2 is up [ 10.829824] CPU3 is up [ 10.830569] pcieport 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 10.830571] pcieport 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 10.848884] PM: noirq resume of devices complete after 19.054 msecs [ 10.850495] PM: early resume of devices complete after 1.289 msecs [ 10.879689] PM: resume of devices complete after 29.183 msecs [ 10.958318] Restarting tasks ... done. root@(none):/# root@(none):/# [ 11.171572] ata1: SATA link down (SStatus 0 SControl 300) rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:38 1970 [ 12.160442] PM: Syncing filesystems ... done. [ 12.190507] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.199511] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 12.209444] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.219047] Suspending console(s) (use no_console_suspend to debug) [ 12.296211] PM: suspend of devices complete after 67.000 msecs [ 12.303138] PM: late suspend of devices complete after 6.891 msecs [ 12.328941] PM: noirq suspend of devices complete after 25.775 msecs [ 12.328951] Disabling non-boot CPUs ... [ 12.331303] CPU1: shutdown [ 12.371446] CPU2: shutdown [ 12.395519] CPU3: shutdown [ 12.417520] Entering suspend state LP1 [ 12.417535] Enabling non-boot CPUs ... [ 12.444610] CPU1 is up [ 12.474663] CPU2 is up [ 12.504799] CPU3 is up [ 12.505488] pcieport 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 12.505586] pcieport 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 12.523851] PM: noirq resume of devices complete after 19.046 msecs [ 12.525383] PM: early resume of devices complete after 1.198 msecs [ 12.554669] PM: resume of devices complete after 29.276 msecs [ 12.633283] Restarting tasks ... done. root@(none):/# root@(none):/# [ 12.846539] ata1: SATA link down (SStatus 0 SControl 300) rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 13.834224] PM: Syncing filesystems ... done. [ 13.857121] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 13.865795] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 13.875653] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 13.884825] Suspending console(s) (use no_console_suspend to debug) [ 13.960957] PM: suspend of devices complete after 67.191 msecs [ 13.967121] PM: late suspend of devices complete after 6.137 msecs [ 13.987201] PM: noirq suspend of devices complete after 20.060 msecs [ 13.987208] Disabling non-boot CPUs ... [ 13.988847] CPU1: shutdown [ 14.028928] CPU2: shutdown [ 14.058207] CPU3: shutdown [ 14.081257] Entering suspend state LP1 [ 14.081273] Enabling non-boot CPUs ... [ 14.109579] CPU1 is up [ 14.139622] CPU2 is up [ 14.169756] CPU3 is up [ 14.170435] pcieport 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 14.170538] pcieport 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 14.188822] PM: noirq resume of devices complete after 19.061 msecs [ 14.190260] PM: early resume of devices complete after 1.119 msecs [ 14.219683] PM: resume of devices complete after 29.413 msecs [ 14.298315] Restarting tasks ... done. root@(none):/# root@(none):/# [ 14.511518] ata1: SATA link down (SStatus 0 SControl 300) rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:48 1970 [ 15.509972] PM: Syncing filesystems ... done. [ 15.541856] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 15.550850] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 15.560887] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 15.570468] Suspending console(s) (use no_console_suspend to debug) [ 15.651405] PM: suspend of devices complete after 70.524 msecs [ 15.660268] PM: late suspend of devices complete after 8.828 msecs [ 15.684101] PM: noirq suspend of devices complete after 23.804 msecs [ 15.684111] Disabling non-boot CPUs ... [ 15.686488] CPU1: shutdown [ 15.726315] CPU2: shutdown [ 15.750336] CPU3: shutdown [ 15.772369] Entering suspend state LP1 [ 15.772384] Enabling non-boot CPUs ... [ 15.799545] CPU1 is up [ 15.829594] CPU2 is up [ 15.859731] CPU3 is up [ 15.860414] pcieport 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 15.860515] pcieport 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 15.878794] PM: noirq resume of devices complete after 19.056 msecs [ 15.880337] PM: early resume of devices complete after 1.214 msecs [ 15.909696] PM: resume of devices complete after 29.348 msecs [ 15.988334] Restarting tasks ... done. root@(none):/# root@(none):/# [ 16.201513] ata1: SATA link down (SStatus 0 SControl 300) rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:53 1970 [ 17.199542] PM: Syncing filesystems ... done. [ 17.232122] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 17.241143] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 17.251179] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 17.260715] Suspending console(s) (use no_console_suspend to debug) [ 17.342312] PM: suspend of devices complete after 71.335 msecs [ 17.351126] PM: late suspend of devices complete after 8.775 msecs [ 17.373893] PM: noirq suspend of devices complete after 22.738 msecs [ 17.373903] Disabling non-boot CPUs ... [ 17.376229] CPU1: shutdown [ 17.401239] CPU2: shutdown [ 17.425315] CPU3: shutdown [ 17.447359] Entering suspend state LP1 [ 17.447374] Enabling non-boot CPUs ... [ 17.474515] CPU1 is up [ 17.504560] CPU2 is up [ 17.539694] CPU3 is up [ 17.540389] pcieport 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 17.540490] pcieport 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 17.558759] PM: noirq resume of devices complete after 19.058 msecs [ 17.560280] PM: early resume of devices complete after 1.194 msecs [ 17.588966] PM: resume of devices complete after 28.677 msecs [ 17.667525] Restarting tasks ... done. root@(none):/# root@(none):/# [ 17.881462] ata1: SATA link down (SStatus 0 SControl 300) rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 18.875528] PM: Syncing filesystems ... done. [ 18.907283] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.916283] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 18.926308] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.935845] Suspending console(s) (use no_console_suspend to debug) [ 19.017124] PM: suspend of devices complete after 71.037 msecs [ 19.026211] PM: late suspend of devices complete after 9.050 msecs [ 19.049132] PM: noirq suspend of devices complete after 22.892 msecs [ 19.049142] Disabling non-boot CPUs ... [ 19.051536] CPU1: shutdown [ 19.081234] CPU2: shutdown [ 19.105292] CPU3: shutdown [ 19.127384] Entering suspend state LP1 [ 19.127399] Enabling non-boot CPUs ... [ 19.154491] CPU1 is up [ 19.184534] CPU2 is up [ 19.214673] CPU3 is up [ 19.215403] pcieport 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 19.215406] pcieport 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 19.233729] PM: noirq resume of devices complete after 19.050 msecs [ 19.235245] PM: early resume of devices complete after 1.194 msecs [ 19.264424] PM: resume of devices complete after 29.169 msecs [ 19.343021] Restarting tasks ... done. root@(none):/# root@(none):/# [ 19.556446] ata1: SATA link down (SStatus 0 SControl 300) rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 20.554703] PM: Syncing filesystems ... done. [ 20.587077] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 20.596075] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 20.606097] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 20.615633] Suspending console(s) (use no_console_suspend to debug) [ 20.697090] PM: suspend of devices complete after 71.199 msecs [ 20.705359] PM: late suspend of devices complete after 8.231 msecs [ 20.728950] PM: noirq suspend of devices complete after 23.561 msecs [ 20.728960] Disabling non-boot CPUs ... [ 20.731146] CPU1: shutdown [ 20.766384] CPU2: shutdown [ 20.795377] CPU3: shutdown [ 20.817278] Entering suspend state LP1 [ 20.817293] Enabling non-boot CPUs ... [ 20.844451] CPU1 is up [ 20.874495] CPU2 is up [ 20.904635] CPU3 is up [ 20.905345] pcieport 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 20.905347] pcieport 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 20.923698] PM: noirq resume of devices complete after 19.057 msecs [ 20.925170] PM: early resume of devices complete after 1.140 msecs [ 20.953942] PM: resume of devices complete after 28.762 msecs [ 21.032585] Restarting tasks ... done. root@(none):/# root@(none):/# [ 21.246410] ata1: SATA link down (SStatus 0 SControl 300) NVTB SYSTEM SUSPEND TEST COMPLETE