U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################# 3.5 MiB/s done Bytes transferred = 7092008 (6c3728 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 66821 (10505 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6c3728 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013504 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.8.0-rc2-109794-g694d0d0 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Aug 16 02:33:34 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt:Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c141cf40, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 14 pages/cpu @eef85000 s26496 r8192 d22656 u57344 [ 0.000000] pcpu-alloc: s26496 r8192 d22656 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1995996K/2097148K available (9216K kernel code, 1147K rwdata, 3968K rodata, 2048K init, 343K bss, 35616K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0c00000 (10208 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc141edc0 (1148 kB) [ 0.000000] .bss : 0xc1420000 - 0xc1475c88 ( 344 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000013] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000018] Switching to timer-based delay loop, resolution 1000ns [ 0.001804] arm_arch_timer: Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.001811] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001817] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001822] Switching to timer-based delay loop, resolution 83ns [ 0.002026] Console: colour dummy device 80x30 [ 0.002039] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000) [ 0.002045] pid_max: default: 32768 minimum: 301 [ 0.002083] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002087] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002330] CPU: Testing write buffer coherency: ok [ 0.002443] /cpus/cpu@0 missing clock-frequency property [ 0.002457] /cpus/cpu@1 missing clock-frequency property [ 0.002471] /cpus/cpu@2 missing clock-frequency property [ 0.002485] /cpus/cpu@3 missing clock-frequency property [ 0.002490] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002500] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.003794] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004400] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006983] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.011976] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.016703] Brought up 4 CPUs [ 0.016711] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.016713] CPU: All CPU(s) started in SVC mode. [ 0.017257] devtmpfs: initialized [ 0.024260] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.024454] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.024984] pinctrl core: initialized pinctrl subsystem [ 0.025680] NET: Registered protocol family 16 [ 0.026353] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.041741] cpuidle: using governor menu [ 0.047953] No ATAGs? [ 0.047965] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.047968] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.050063] Serial: AMBA PL011 UART driver [ 0.051022] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.068514] +5V_SYS: supplied by +VDD_MUX [ 0.068616] +3.3V_SYS: supplied by +VDD_MUX [ 0.068839] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.068844] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.068874] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.068878] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.068906] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.068911] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.068939] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.068943] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.069020] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.069024] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.069052] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.069056] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.070151] vgaarb: loaded [ 0.070438] SCSI subsystem initialized [ 0.070503] libata version 3.00 loaded. [ 0.070600] usbcore: registered new interface driver usbfs [ 0.070626] usbcore: registered new interface driver hub [ 0.070652] usbcore: registered new device driver usb [ 0.072008] pps_core: LinuxPPS API ver. 1 registered [ 0.072012] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.072020] PTP clock support registered [ 0.072089] EDAC MC: Ver: 3.0.0 [ 0.072531] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.072540] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.073025] clocksource: Switched to clocksource arch_sys_counter [ 0.076739] NET: Registered protocol family 2 [ 0.076946] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.076979] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.077041] TCP: Hash tables configured (established 8192 bind 8192) [ 0.077062] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.077076] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.077136] NET: Registered protocol family 1 [ 0.077277] RPC: Registered named UNIX socket transport module. [ 0.077281] RPC: Registered udp transport module. [ 0.077283] RPC: Registered tcp transport module. [ 0.077286] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.077290] PCI: CLS 0 bytes, default 64 [ 0.077729] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.078294] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.078574] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.082455] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.082764] NFS: Registering the id_resolver key type [ 0.082775] Key type id_resolver registered [ 0.082778] Key type id_legacy registered [ 0.082794] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.083271] bounce: pool size: 64 pages [ 0.083346] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.083350] io scheduler noop registered [ 0.083353] io scheduler deadline registered [ 0.083424] io scheduler cfq registered (default) [ 0.085311] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.085488] libphy: mdio_driver_register: phy-bcm-ns2-pci [ 0.094172] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.094780] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.116568] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.117719] console [ttyS0] disabled [ 0.117747] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 0.978817] console [ttyS0] enabled [ 0.982610] SuperH (H)SCI(F) driver initialized [ 0.987485] msm_serial: driver initialized [ 0.991641] STMicroelectronics ASC driver initialized [ 0.998099] [drm] Initialized drm 1.1.0 20060810 [ 1.003845] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.010381] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.017626] panel supply power not found, using dummy regulator [ 1.027406] brd: module loaded [ 1.032606] loop: module loaded [ 1.036649] as3722 4-0040: AS3722 with revision 0x1 found [ 1.046389] as3722-sd2: supplied by +5V_SYS [ 1.050849] as3722-sd3: supplied by +5V_SYS [ 1.055186] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.061369] as3722-sd4: supplied by +5V_SYS [ 1.065710] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.071456] as3722-sd5: supplied by +5V_SYS [ 1.077048] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.082795] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.088816] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.094440] as3722-ldo3: supplied by +3.3V_SYS [ 1.098897] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.106477] as3722-ldo4: supplied by +3.3V_SYS [ 1.111075] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.117100] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.121871] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.128565] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.134613] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.139383] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.145941] as3722-ldo9: supplied by +5V_SYS [ 1.150507] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.156717] as3722-ldo10: supplied by +5V_SYS [ 1.161230] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.167678] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.180424] random: fast init done [ 1.185994] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.192275] libphy: Fixed MDIO Bus: probed [ 1.196660] CAN device driver interface [ 1.201256] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.208205] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.214929] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.222337] usbcore: registered new interface driver pegasus [ 1.228007] usbcore: registered new interface driver asix [ 1.233415] usbcore: registered new interface driver ax88179_178a [ 1.239514] usbcore: registered new interface driver cdc_ether [ 1.245357] usbcore: registered new interface driver smsc75xx [ 1.251114] usbcore: registered new interface driver smsc95xx [ 1.256864] usbcore: registered new interface driver net1080 [ 1.262527] usbcore: registered new interface driver cdc_subset [ 1.268450] usbcore: registered new interface driver zaurus [ 1.274037] usbcore: registered new interface driver cdc_ncm [ 1.280344] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.286861] ehci-pci: EHCI PCI platform driver [ 1.291311] ehci-platform: EHCI generic platform driver [ 1.296602] ehci-orion: EHCI orion driver [ 1.300654] SPEAr-ehci: EHCI SPEAr driver [ 1.304706] ehci-st: EHCI STMicroelectronics driver [ 1.309625] ehci-exynos: EHCI EXYNOS driver [ 1.313857] ehci-atmel: EHCI Atmel driver [ 1.317902] tegra-ehci: Tegra EHCI driver [ 1.321969] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.328142] ohci-pci: OHCI PCI platform driver [ 1.332587] ohci-platform: OHCI generic platform driver [ 1.337862] ohci-omap3: OHCI OMAP3 driver [ 1.341917] SPEAr-ohci: OHCI SPEAr driver [ 1.345972] ohci-st: OHCI STMicroelectronics driver [ 1.350892] ohci-atmel: OHCI Atmel driver [ 1.355160] usbcore: registered new interface driver usb-storage [ 1.361735] mousedev: PS/2 mouse device common for all mice [ 1.367683] 1-0015 supply vcc not found, using dummy regulator [ 1.373573] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.380442] as3722-rtc as3722-rtc: RTC interrupt 370 [ 1.387348] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.394491] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.400855] i2c /dev entries driver [ 1.406809] 0-004c supply vcc not found, using dummy regulator [ 1.416752] sdhci: Secure Digital Host Controller Interface driver [ 1.422933] sdhci: Copyright(c) Pierre Ossman [ 1.427846] Synopsys Designware Multimedia Card Interface Driver [ 1.434235] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.440172] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.445937] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.450813] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.455800] mmc0: Unknown controller version (3). You may experience problems. [ 1.463044] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.513034] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 1.521741] ledtrig-cpu: registered to indicate activity on CPUs [ 1.527943] usbcore: registered new interface driver usbhid [ 1.533513] usbhid: USB HID core driver [ 1.539731] NET: Registered protocol family 10 [ 1.544525] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.550760] NET: Registered protocol family 17 [ 1.555210] can: controller area network core (rev 20120528 abi 9) [ 1.561414] NET: Registered protocol family 29 [ 1.565855] can: raw protocol (rev 20120528) [ 1.570122] can: broadcast manager protocol (rev 20160617 t) [ 1.575779] can: netlink gateway (rev 20130117) max_hops=1 [ 1.581406] Key type dns_resolver registered [ 1.585919] ThumbEE CPU extension supported. [ 1.590193] Registering SWP/SWPB emulation handler [ 1.596930] +3.3V_RUN: supplied by +3.3V_SYS [ 1.600386] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 1.609658] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.615330] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.620053] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.624798] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.630131] +VDD_LED: supplied by +VDD_MUX [ 1.634574] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.639375] +5V_USB_HS: supplied by +5V_SYS [ 1.643908] +5V_USB_SS: supplied by +5V_SYS [ 1.649108] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.649429] mmc0: new high speed MMC card at address 0001 [ 1.650113] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.650751] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.651249] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.651688] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 1.657273] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.687524] +3.3V_LP0: supplied by +3.3V_SYS [ 1.692432] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.692714] elan_i2c 1-0015: failed to read report data: -121 [ 1.704194] +5V_HDMI_CON: supplied by +5V_SYS [ 1.709254] usb3-0 supply vbus not found, using dummy regulator [ 1.715212] usb3-1 supply vbus not found, using dummy regulator [ 1.724485] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.731012] panel supply power not found, using dummy regulator [ 1.737578] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.743336] mmc1: Unknown controller version (3). You may experience problems. [ 1.750677] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.757037] mmc1: Switching to 3.3V signalling voltage failed [ 1.798118] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit [ 1.806861] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.811759] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.816758] mmc2: Unknown controller version (3). You may experience problems. [ 1.824087] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.832790] elan_i2c 1-0015: invalid report id data (ff) [ 1.869792] mmc1: new high speed SDIO card at address 0001 [ 1.875620] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 1.978501] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.985165] [drm] No driver support for vblank timestamp query. [ 2.035752] mmc2: new high speed SDHC card at address 0007 [ 2.036372] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.045332] Console: switching to colour frame buffer device 170x48 [ 2.065508] drm drm: fb0: frame buffer device [ 2.072541] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.078742] GPT:3014591 != 15564799 [ 2.082219] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.089620] GPT:3014591 != 15564799 [ 2.093104] GPT: Use GNU Parted to correct GPT errors. [ 2.098274] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.113104] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.119884] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.126821] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:23:44 UTC (946686224) [ 2.139448] +1.8V_RUN_CAM: disabling [ 2.143286] +3.3V_RUN_CAM: disabling [ 2.147058] +1.2V_RUN_CAM_FRONT: disabling [ 2.151379] +1.05V_RUN_CAM_REAR: disabling [ 2.155743] +2.8V_RUN_TOUCH: disabling [ 2.159724] +2.8V_RUN_CAM_AF: disabling [ 2.163785] +1.8V_RUN_VPP_FUSE: disabling [ 2.167952] +5V_VDD_TS_SW: disabling [ 2.171549] +5V_USB_HS: disabling [ 2.174865] +5V_USB_SS: disabling [ 2.179187] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.187837] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.248583] EXT4-fs (mmcblk0p3): recovery complete [ 2.254304] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.262435] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.269689] devtmpfs: mounted [ 2.273381] Freeing unused kernel memory: 2048K (c1100000 - c1300000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#