U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################ 3.4 MiB/s done Bytes transferred = 5408136 (528588 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 66821 (10505 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x528588 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013504 Starting kernel ... [ 3.115487] console [ttyS0] enabled [ 3.118963] bootconsole [earlycon0] disabled [ 3.124227] [drm] Initialized drm 1.1.0 20060810 [ 3.129290] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 3.135883] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 3.143202] panel supply power not found, using dummy regulator [ 3.154602] loop: module loaded [ 3.158357] as3722 4-0040: AS3722 with revision 0x1 found [ 3.168488] as3722-sd2: supplied by +5V_SYS [ 3.172993] as3722-sd3: supplied by +5V_SYS [ 3.177350] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 3.183610] as3722-sd4: supplied by +5V_SYS [ 3.187956] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 3.193781] as3722-sd5: supplied by +5V_SYS [ 3.199586] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 3.205413] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 3.211526] as3722-ldo2: supplied by +1.8V_VDDIO [ 3.217259] as3722-ldo3: supplied by +3.3V_SYS [ 3.221713] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 3.229377] as3722-ldo4: supplied by +3.3V_SYS [ 3.233974] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 3.240090] as3722-ldo5: supplied by +1.8V_VDDIO [ 3.244874] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 3.251657] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 3.257788] as3722-ldo7: supplied by +1.8V_VDDIO [ 3.262561] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 3.269211] as3722-ldo9: supplied by +5V_SYS [ 3.273784] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 3.280087] as3722-ldo10: supplied by +5V_SYS [ 3.284594] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 3.291129] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 3.341633] cros-ec-spi spi32766.0: Chrome EC device registered [ 3.351769] random: fast init done [ 3.357046] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 3.363431] libphy: Fixed MDIO Bus: probed [ 3.367534] CAN device driver interface [ 3.371392] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 3.378340] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.384011] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 3.391451] usbcore: registered new interface driver pegasus [ 3.397161] usbcore: registered new interface driver asix [ 3.402583] usbcore: registered new interface driver ax88179_178a [ 3.408714] usbcore: registered new interface driver cdc_ether [ 3.414594] usbcore: registered new interface driver smsc75xx [ 3.420377] usbcore: registered new interface driver smsc95xx [ 3.426161] usbcore: registered new interface driver net1080 [ 3.431842] usbcore: registered new interface driver cdc_subset [ 3.437791] usbcore: registered new interface driver zaurus [ 3.443406] usbcore: registered new interface driver cdc_ncm [ 3.449165] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.455680] ehci-pci: EHCI PCI platform driver [ 3.460151] tegra-ehci: Tegra EHCI driver [ 3.464481] usbcore: registered new interface driver cdc_acm [ 3.470130] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 3.478158] usbcore: registered new interface driver cdc_wdm [ 3.483859] usbcore: registered new interface driver usb-storage [ 3.490123] mousedev: PS/2 mouse device common for all mice [ 3.496001] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi32766/spi32766.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 3.511031] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 3.517898] as3722-rtc as3722-rtc: RTC interrupt 370 [ 3.524726] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 3.531876] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 3.538185] i2c /dev entries driver [ 3.542423] usbcore: registered new interface driver uvcvideo [ 3.548162] USB Video Class driver (1.1.1) [ 3.552245] gspca_main: v2.14.0 registered [ 3.556626] 0-004c supply vcc not found, using dummy regulator [ 3.564399] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 3.572818] sdhci: Secure Digital Host Controller Interface driver [ 3.578992] sdhci: Copyright(c) Pierre Ossman [ 3.583334] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.589131] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 3.594927] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 3.599797] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 3.604821] mmc0: Unknown controller version (3). You may experience problems. [ 3.612053] mmc0: Invalid maximum block size, assuming 512 bytes [ 3.674589] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 3.685059] usbcore: registered new interface driver usbhid [ 3.693540] usbhid: USB HID core driver [ 3.704605] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 3.745067] max98090 0-0010: MAX98090 REVID=0x43 [ 3.752363] max98090 0-0010: use default 2.8v micbias [ 3.755019] mmc0: new high speed MMC card at address 0001 [ 3.755478] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 3.755671] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 3.755854] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 3.756013] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 3.759189] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 3.793114] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 3.800922] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 3.809040] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 4.104583] NET: Registered protocol family 10 [ 4.264595] mip6: Mobile IPv6 [ 4.267554] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.274511] NET: Registered protocol family 17 [ 4.278966] NET: Registered protocol family 15 [ 4.283396] can: controller area network core (rev 20120528 abi 9) [ 4.324621] NET: Registered protocol family 29 [ 4.329052] can: raw protocol (rev 20120528) [ 4.333309] can: broadcast manager protocol (rev 20160617 t) [ 4.338966] can: netlink gateway (rev 20130117) max_hops=1 [ 4.374633] Bluetooth: RFCOMM socket layer initialized [ 4.379766] Bluetooth: RFCOMM ver 1.11 [ 4.383506] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.388816] Bluetooth: BNEP socket layer initialized [ 4.393766] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.399680] Bluetooth: HIDP socket layer initialized [ 4.404768] Key type dns_resolver registered [ 4.409488] Registering SWP/SWPB emulation handler [ 4.415382] +3.3V_RUN: supplied by +3.3V_SYS [ 4.419988] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 4.425631] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 4.430283] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 4.434933] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 4.440064] +VDD_LED: supplied by +VDD_MUX [ 4.444361] +5V_VDD_TS_SW: supplied by +5V_SYS [ 4.449152] +5V_USB_HS: supplied by +5V_SYS [ 4.453540] +5V_USB_SS: supplied by +5V_SYS [ 4.458635] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3 [ 4.467951] +3.3V_PANEL: supplied by +3.3V_RUN [ 4.473414] +3.3V_LP0: supplied by +3.3V_SYS [ 4.478472] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 4.484361] +5V_HDMI_CON: supplied by +5V_SYS [ 4.489859] usb3-0 supply vbus not found, using dummy regulator [ 4.495857] usb3-1 supply vbus not found, using dummy regulator [ 4.504439] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.510614] panel supply power not found, using dummy regulator [ 4.585300] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 4.592710] tegra-xusb 70090000.usb: xHCI Host Controller [ 4.598128] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 4.607732] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 4.616378] tegra-xusb 70090000.usb: irq 342, io mem 0x70090000 [ 4.623125] hub 1-0:1.0: USB hub found [ 4.626931] hub 1-0:1.0: 6 ports detected [ 4.631658] tegra-xusb 70090000.usb: xHCI Host Controller [ 4.637090] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 4.644790] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.653685] hub 2-0:1.0: USB hub found [ 4.657498] hub 2-0:1.0: 2 ports detected [ 4.662610] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 4.668498] mmc1: Unknown controller version (3). You may experience problems. [ 4.675785] mmc1: Invalid maximum block size, assuming 512 bytes [ 4.682352] mmc1: Switching to 3.3V signalling voltage failed [ 4.744670] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit [ 4.752950] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 4.759885] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 4.768272] mmc2: Unknown controller version (3). You may experience problems. [ 4.775630] mmc2: Invalid maximum block size, assuming 512 bytes [ 4.816855] mmc1: new high speed SDIO card at address 0001 [ 4.844743] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 4.952815] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.959448] [drm] No driver support for vblank timestamp query. [ 4.994605] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 4.996845] mmc2: new high speed SDHC card at address 0007 [ 4.997561] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 5.006334] GPT:Primary header alternate_lba != Alt. header my_lba [ 5.006338] GPT:3014591 != 15564799 [ 5.006339] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 5.006340] GPT:3014591 != 15564799 [ 5.006341] GPT: Use GNU Parted to correct GPT errors. [ 5.006367] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 5.021679] Console: switching to colour frame buffer device 170x48 [ 5.079730] drm drm: fb0: frame buffer device [ 5.114670] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.121071] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 5.128617] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:25 UTC (946684825) [ 5.142857] +1.8V_RUN_CAM: disabling [ 5.146684] +1.2V_RUN_CAM_FRONT: disabling [ 5.150980] +1.05V_RUN_CAM_REAR: disabling [ 5.155324] +2.8V_RUN_TOUCH: disabling [ 5.159271] +2.8V_RUN_CAM_AF: disabling [ 5.163266] +1.8V_RUN_VPP_FUSE: disabling [ 5.167478] +5V_VDD_TS_SW: disabling [ 5.171236] ALSA device list: [ 5.174196] #0: tegra-hda at 0x70038000 irq 341 [ 5.178924] #1: GoogleNyanBig [ 5.182843] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 5.305391] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 5.320451] input: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 5.664679] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 5.684901] EXT4-fs (mmcblk0p3): recovery complete [ 5.689688] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 5.697835] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 5.705002] devtmpfs: mounted [ 5.708409] Freeing unused kernel memory: 1024K (c0c00000 - c0d00000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 6.737474] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 7.084680] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 7.263473] usb-storage 1-1:1.0: USB Mass Storage device detected [ 7.270467] scsi host0: usb-storage 1-1:1.0 [ 7.354771] scsi host0: runtime PM trying to activate child device host0 but parent (1-1:1.0) is not active [ 8.406737] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 8.579381] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 8.588080] sd 0:0:0:0: [sda] Write Protect is off [ 8.592873] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 8.599160] sd 0:0:0:0: [sda] No Caching mode page found [ 8.604471] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 8.629939] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 8.643995] sd 0:0:0:0: [sda] Attached SCSI removable disk mount -t sysfs none /sys root@(none):/# root@(none):/# mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:53 1970 [ 31.884622] PM: Syncing filesystems ... done. [ 31.894759] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 31.902924] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 31.912610] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 31.921304] Suspending console(s) (use no_console_suspend to debug) [ 32.146018] PM: suspend of devices complete after 217.846 msecs [ 32.147614] PM: late suspend of devices complete after 1.587 msecs [ 32.148441] PM: noirq suspend of devices complete after 0.822 msecs [ 32.148443] Disabling non-boot CPUs ... [ 32.215008] CPU1: shutdown [ 32.314913] CPU2: shutdown [ 32.424787] IRQ17 no longer affine to CPU3 [ 32.424956] CPU3: shutdown [ 32.475394] Entering suspend state LP1 [ 32.475407] Enabling non-boot CPUs ... [ 32.535786] CPU1 is up [ 32.595953] CPU2 is up [ 32.656184] CPU3 is up [ 32.656728] PM: noirq resume of devices complete after 0.539 msecs [ 32.658396] PM: early resume of devices complete after 1.162 msecs [ 32.710562] mmc1: Switching to 3.3V signalling voltage failed [ 32.964573] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 32.981645] PM: resume of devices complete after 323.241 msecs [ 33.061058] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 34.014375] PM: Syncing filesystems ... done. [ 34.023923] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 34.032067] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 34.041659] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 34.050375] Suspending console(s) (use no_console_suspend to debug) [ 34.266013] PM: suspend of devices complete after 208.778 msecs [ 34.266987] PM: late suspend of devices complete after 0.966 msecs [ 34.267846] PM: noirq suspend of devices complete after 0.855 msecs [ 34.267848] Disabling non-boot CPUs ... [ 34.304924] CPU1: shutdown [ 34.404905] CPU2: shutdown [ 34.504873] CPU3: shutdown [ 34.555365] Entering suspend state LP1 [ 34.555391] Enabling non-boot CPUs ... [ 34.615779] CPU1 is up [ 34.675919] CPU2 is up [ 34.736161] CPU3 is up [ 34.736723] PM: noirq resume of devices complete after 0.557 msecs [ 34.738638] PM: early resume of devices complete after 1.409 msecs [ 34.779998] mmc1: Switching to 3.3V signalling voltage failed [ 34.964886] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 35.034599] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 35.141363] PM: resume of devices complete after 402.716 msecs [ 35.223672] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 36.094354] PM: Syncing filesystems ... done. [ 36.103851] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 36.112059] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 36.121726] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 36.130363] Suspending console(s) (use no_console_suspend to debug) [ 36.345934] PM: suspend of devices complete after 208.702 msecs [ 36.346828] PM: late suspend of devices complete after 0.889 msecs [ 36.347657] PM: noirq suspend of devices complete after 0.825 msecs [ 36.347659] Disabling non-boot CPUs ... [ 36.384904] CPU1: shutdown [ 36.504880] CPU2: shutdown [ 36.604848] CPU3: shutdown [ 36.655342] Entering suspend state LP1 [ 36.655367] Enabling non-boot CPUs ... [ 36.715760] CPU1 is up [ 36.775912] CPU2 is up [ 36.836138] CPU3 is up [ 36.836716] PM: noirq resume of devices complete after 0.574 msecs [ 36.838705] PM: early resume of devices complete after 1.499 msecs [ 36.889707] mmc1: Switching to 3.3V signalling voltage failed [ 37.144579] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 37.160714] PM: resume of devices complete after 322.003 msecs [ 37.236027] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:08 1970 [ 38.204332] PM: Syncing filesystems ... done. [ 38.213829] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 38.221949] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 38.231619] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 38.240260] Suspending console(s) (use no_console_suspend to debug) [ 38.455908] PM: suspend of devices complete after 208.775 msecs [ 38.456800] PM: late suspend of devices complete after 0.888 msecs [ 38.457628] PM: noirq suspend of devices complete after 0.824 msecs [ 38.457630] Disabling non-boot CPUs ... [ 38.494880] CPU1: shutdown [ 38.604856] CPU2: shutdown [ 38.704824] CPU3: shutdown [ 38.755321] Entering suspend state LP1 [ 38.755346] Enabling non-boot CPUs ... [ 38.815736] CPU1 is up [ 38.875893] CPU2 is up [ 38.936121] CPU3 is up [ 38.936673] PM: noirq resume of devices complete after 0.547 msecs [ 38.938736] PM: early resume of devices complete after 1.546 msecs [ 38.979779] mmc1: Switching to 3.3V signalling voltage failed [ 39.234567] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 39.250885] PM: resume of devices complete after 312.143 msecs [ 39.326187] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:13 1970 [ 40.295242] PM: Syncing filesystems ... done. [ 40.304609] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 40.312785] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 40.322457] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 40.331105] Suspending console(s) (use no_console_suspend to debug) [ 40.545882] PM: suspend of devices complete after 207.909 msecs [ 40.546774] PM: late suspend of devices complete after 0.888 msecs [ 40.547597] PM: noirq suspend of devices complete after 0.819 msecs [ 40.547599] Disabling non-boot CPUs ... [ 40.584853] CPU1: shutdown [ 40.714830] CPU2: shutdown [ 40.814800] CPU3: shutdown [ 40.865295] Entering suspend state LP1 [ 40.865306] Enabling non-boot CPUs ... [ 40.925714] CPU1 is up [ 40.985868] CPU2 is up [ 41.046094] CPU3 is up [ 41.046638] PM: noirq resume of devices complete after 0.539 msecs [ 41.048562] PM: early resume of devices complete after 1.434 msecs [ 41.089610] mmc1: Switching to 3.3V signalling voltage failed [ 41.274835] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 41.344545] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 41.451113] PM: resume of devices complete after 402.542 msecs [ 41.533329] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:18 1970 [ 42.405019] PM: Syncing filesystems ... done. [ 42.414357] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 42.422466] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 42.432139] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 42.440791] Suspending console(s) (use no_console_suspend to debug) [ 42.655859] PM: suspend of devices complete after 208.202 msecs [ 42.656751] PM: late suspend of devices complete after 0.887 msecs [ 42.657575] PM: noirq suspend of devices complete after 0.821 msecs [ 42.657577] Disabling non-boot CPUs ... [ 42.694830] CPU1: shutdown [ 42.804803] CPU2: shutdown [ 42.904778] CPU3: shutdown [ 42.955270] Entering suspend state LP1 [ 42.955282] Enabling non-boot CPUs ... [ 43.015701] CPU1 is up [ 43.075841] CPU2 is up [ 43.136081] CPU3 is up [ 43.136599] PM: noirq resume of devices complete after 0.514 msecs [ 43.138337] PM: early resume of devices complete after 1.231 msecs [ 43.179655] mmc1: Switching to 3.3V signalling voltage failed [ 43.364817] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 43.434462] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 43.541237] PM: resume of devices complete after 402.890 msecs [ 43.623464] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:23 1970 [ 44.494156] PM: Syncing filesystems ... done. [ 44.503695] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 44.511916] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 44.521587] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 44.530233] Suspending console(s) (use no_console_suspend to debug) [ 44.745833] PM: suspend of devices complete after 208.732 msecs [ 44.746724] PM: late suspend of devices complete after 0.887 msecs [ 44.747549] PM: noirq suspend of devices complete after 0.821 msecs [ 44.747551] Disabling non-boot CPUs ... [ 44.784808] CPU1: shutdown [ 44.894772] CPU2: shutdown [ 45.004743] CPU3: shutdown [ 45.055243] Entering suspend state LP1 [ 45.055255] Enabling non-boot CPUs ... [ 45.115665] CPU1 is up [ 45.175823] CPU2 is up [ 45.236043] CPU3 is up [ 45.236553] PM: noirq resume of devices complete after 0.505 msecs [ 45.238460] PM: early resume of devices complete after 1.413 msecs [ 45.279716] mmc1: Switching to 3.3V signalling voltage failed [ 45.534488] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 45.550888] PM: resume of devices complete after 312.422 msecs [ 45.626229] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:28 1970 [ 46.594624] PM: Syncing filesystems ... done. [ 46.603712] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 46.611814] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 46.621480] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 46.630129] Suspending console(s) (use no_console_suspend to debug) [ 46.845811] PM: suspend of devices complete after 208.810 msecs [ 46.846702] PM: late suspend of devices complete after 0.887 msecs [ 46.847523] PM: noirq suspend of devices complete after 0.817 msecs [ 46.847525] Disabling non-boot CPUs ... [ 46.884782] CPU1: shutdown [ 46.984758] CPU2: shutdown [ 47.094721] CPU3: shutdown [ 47.145222] Entering suspend state LP1 [ 47.145234] Enabling non-boot CPUs ... [ 47.205679] CPU1 is up [ 47.265797] CPU2 is up [ 47.326021] CPU3 is up [ 47.326541] PM: noirq resume of devices complete after 0.515 msecs [ 47.328271] PM: early resume of devices complete after 1.212 msecs [ 47.369634] mmc1: Switching to 3.3V signalling voltage failed [ 47.564780] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 47.624469] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 47.740896] PM: resume of devices complete after 412.616 msecs [ 47.823130] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:33 1970 [ 48.694751] PM: Syncing filesystems ... done. [ 48.704297] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 48.712421] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 48.722019] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 48.730730] Suspending console(s) (use no_console_suspend to debug) [ 48.955847] PM: suspend of devices complete after 218.249 msecs [ 48.957052] PM: late suspend of devices complete after 1.196 msecs [ 48.958001] PM: noirq suspend of devices complete after 0.944 msecs [ 48.958003] Disabling non-boot CPUs ... [ 48.994770] CPU1: shutdown [ 49.104734] CPU2: shutdown [ 49.204705] CPU3: shutdown [ 49.255210] Entering suspend state LP1 [ 49.255222] Enabling non-boot CPUs ... [ 49.315643] CPU1 is up [ 49.375784] CPU2 is up [ 49.436009] CPU3 is up [ 49.436526] PM: noirq resume of devices complete after 0.513 msecs [ 49.438351] PM: early resume of devices complete after 1.330 msecs [ 49.479465] mmc1: Switching to 3.3V signalling voltage failed [ 49.734436] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 49.750532] PM: resume of devices complete after 312.175 msecs [ 49.825858] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:38 1970 [ 50.804731] PM: Syncing filesystems ... done. [ 50.814285] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 50.822502] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 50.832146] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 50.840860] Suspending console(s) (use no_console_suspend to debug) [ 51.065867] PM: suspend of devices complete after 218.139 msecs [ 51.067568] PM: late suspend of devices complete after 1.692 msecs [ 51.068490] PM: noirq suspend of devices complete after 0.918 msecs [ 51.068492] Disabling non-boot CPUs ... [ 51.104740] CPU1: shutdown [ 51.204727] CPU2: shutdown [ 51.304689] CPU3: shutdown [ 51.355196] Entering suspend state LP1 [ 51.355208] Enabling non-boot CPUs ... [ 51.415631] CPU1 is up [ 51.475773] CPU2 is up [ 51.535993] CPU3 is up [ 51.536529] PM: noirq resume of devices complete after 0.532 msecs [ 51.538268] PM: early resume of devices complete after 1.229 msecs [ 51.579787] mmc1: Switching to 3.3V signalling voltage failed [ 51.834372] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 51.850810] PM: resume of devices complete after 312.537 msecs [ 51.926135] Restarting tasks ... done. root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE