U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 3.5 MiB/s done Bytes transferred = 5547720 (54a6c8 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 66901 (10555 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x54a6c8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013554 Starting kernel ... [ 2.505437] console [ttyS0] enabled [ 2.508914] bootconsole [earlycon0] disabled [ 2.514249] [drm] Initialized drm 1.1.0 20060810 [ 2.519585] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 2.526187] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 2.533482] panel supply power not found, using dummy regulator [ 2.564842] loop: module loaded [ 2.568592] as3722 4-0040: AS3722 with revision 0x1 found [ 2.578790] as3722-sd2: supplied by +5V_SYS [ 2.583298] as3722-sd3: supplied by +5V_SYS [ 2.587649] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 2.593909] as3722-sd4: supplied by +5V_SYS [ 2.598253] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 2.604079] as3722-sd5: supplied by +5V_SYS [ 2.609863] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.615699] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 2.621805] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.627533] as3722-ldo3: supplied by +3.3V_SYS [ 2.631984] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 2.639650] as3722-ldo4: supplied by +3.3V_SYS [ 2.644246] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 2.650359] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.655141] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 2.661921] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 2.668056] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.672829] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.679476] as3722-ldo9: supplied by +5V_SYS [ 2.684046] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.690349] as3722-ldo10: supplied by +5V_SYS [ 2.694865] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.701401] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.741772] cros-ec-spi spi32766.0: Chrome EC device registered [ 2.757225] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 2.763422] CAN device driver interface [ 2.767299] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 2.774241] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.779924] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 2.787369] usbcore: registered new interface driver pegasus [ 2.793066] usbcore: registered new interface driver asix [ 2.798505] usbcore: registered new interface driver ax88179_178a [ 2.804637] usbcore: registered new interface driver cdc_ether [ 2.810509] usbcore: registered new interface driver smsc75xx [ 2.816303] usbcore: registered new interface driver smsc95xx [ 2.822072] usbcore: registered new interface driver net1080 [ 2.827762] usbcore: registered new interface driver cdc_subset [ 2.833703] usbcore: registered new interface driver zaurus [ 2.839323] usbcore: registered new interface driver cdc_ncm [ 2.845074] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.851584] ehci-pci: EHCI PCI platform driver [ 2.856064] tegra-ehci: Tegra EHCI driver [ 2.860407] usbcore: registered new interface driver cdc_acm [ 2.866057] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.874079] usbcore: registered new interface driver cdc_wdm [ 2.879785] usbcore: registered new interface driver usb-storage [ 2.886047] mousedev: PS/2 mouse device common for all mice [ 2.891924] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi32766/spi32766.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 2.906959] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 2.913816] as3722-rtc as3722-rtc: RTC interrupt 370 [ 2.920641] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 2.927796] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 2.934100] i2c /dev entries driver [ 2.938344] usbcore: registered new interface driver uvcvideo [ 2.944074] USB Video Class driver (1.1.1) [ 2.948165] gspca_main: v2.14.0 registered [ 2.952552] 0-004c supply vcc not found, using dummy regulator [ 2.960333] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 2.968758] sdhci: Secure Digital Host Controller Interface driver [ 2.974933] sdhci: Copyright(c) Pierre Ossman [ 2.979275] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.985080] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.990738] mmc0: Unknown controller version (3). You may experience problems. [ 2.998132] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 3.003003] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 3.007901] mmc0: Unknown controller version (3). You may experience problems. [ 3.015255] mmc0: Unknown controller version (3). You may experience problems. [ 3.022493] mmc0: Invalid maximum block size, assuming 512 bytes [ 3.064578] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 3.075064] usbcore: registered new interface driver usbhid [ 3.083673] usbhid: USB HID core driver [ 3.094571] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 3.125024] max98090 0-0010: MAX98090 REVID=0x43 [ 3.131475] max98090 0-0010: use default 2.8v micbias [ 3.135039] mmc0: new high speed MMC card at address 0001 [ 3.144497] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 3.151056] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 3.152569] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 3.152892] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 3.171217] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 3.187312] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 3.193359] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 3.202103] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 3.414547] NET: Registered protocol family 10 [ 3.574558] mip6: Mobile IPv6 [ 3.577519] sit: IPv6 over IPv4 tunneling driver [ 3.583175] NET: Registered protocol family 17 [ 3.587630] NET: Registered protocol family 15 [ 3.592061] can: controller area network core (rev 20120528 abi 9) [ 3.598572] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3 [ 3.624585] NET: Registered protocol family 29 [ 3.629016] can: raw protocol (rev 20120528) [ 3.633273] can: broadcast manager protocol (rev 20120528 t) [ 3.638931] can: netlink gateway (rev 20130117) max_hops=1 [ 3.664593] Bluetooth: RFCOMM socket layer initialized [ 3.669727] Bluetooth: RFCOMM ver 1.11 [ 3.673470] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.678777] Bluetooth: BNEP socket layer initialized [ 3.683727] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.689640] Bluetooth: HIDP socket layer initialized [ 3.694741] Key type dns_resolver registered [ 3.699459] Registering SWP/SWPB emulation handler [ 3.705300] +3.3V_RUN: supplied by +3.3V_SYS [ 3.710224] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 3.715876] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 3.720584] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 3.725289] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 3.730556] +VDD_LED: supplied by +VDD_MUX [ 3.735016] +5V_VDD_TS_SW: supplied by +5V_SYS [ 3.739666] +5V_USB_HS: supplied by +5V_SYS [ 3.744051] +5V_USB_SS: supplied by +5V_SYS [ 3.749332] +3.3V_PANEL: supplied by +3.3V_RUN [ 3.754865] +3.3V_LP0: supplied by +3.3V_SYS [ 3.759994] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.766066] +5V_HDMI_CON: supplied by +5V_SYS [ 3.771568] usb3-0 supply vbus not found, using dummy regulator [ 3.777582] usb3-1 supply vbus not found, using dummy regulator [ 3.786320] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.792529] panel supply power not found, using dummy regulator [ 3.855264] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 3.862673] tegra-xusb 70090000.usb: xHCI Host Controller [ 3.868094] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 3.877654] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 3.886290] tegra-xusb 70090000.usb: irq 342, io mem 0x70090000 [ 3.893013] hub 1-0:1.0: USB hub found [ 3.896862] hub 1-0:1.0: 6 ports detected [ 3.901587] tegra-xusb 70090000.usb: xHCI Host Controller [ 3.907041] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 3.914726] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.923556] hub 2-0:1.0: USB hub found [ 3.927394] hub 2-0:1.0: 2 ports detected [ 3.932526] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 3.938262] mmc1: Unknown controller version (3). You may experience problems. [ 3.945705] mmc1: Invalid maximum block size, assuming 512 bytes [ 3.952270] +1.8V_VDDIO: voltage operation not allowed [ 3.957461] mmc1: Switching to 3.3V signalling voltage failed [ 3.994831] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit [ 4.003083] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 4.010104] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 4.018139] mmc2: Unknown controller version (3). You may experience problems. [ 4.025821] mmc2: Invalid maximum block size, assuming 512 bytes [ 4.064797] mmc1: new high speed SDIO card at address 0001 [ 4.074671] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 4.179761] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.186383] [drm] No driver support for vblank timestamp query. [ 4.224574] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 4.226189] mmc2: new high speed SDHC card at address 0007 [ 4.226882] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 4.235688] GPT:Primary header alternate_lba != Alt. header my_lba [ 4.235692] GPT:3014591 != 15564799 [ 4.235694] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 4.235695] GPT:3014591 != 15564799 [ 4.235695] GPT: Use GNU Parted to correct GPT errors. [ 4.235722] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 4.248387] Console: switching to colour frame buffer device 170x48 [ 4.306495] drm drm: fb0: frame buffer device [ 4.334644] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.341127] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 4.348438] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824) [ 4.362640] +1.8V_RUN_CAM: disabling [ 4.366469] +1.2V_RUN_CAM_FRONT: disabling [ 4.370769] +1.05V_RUN_CAM_REAR: disabling [ 4.375096] +2.8V_RUN_TOUCH: disabling [ 4.379047] +2.8V_RUN_CAM_AF: disabling [ 4.383084] +1.8V_RUN_VPP_FUSE: disabling [ 4.387334] +5V_VDD_TS_SW: disabling [ 4.391097] ALSA device list: [ 4.394057] #0: tegra-hda at 0x70038000 irq 341 [ 4.398778] #1: GoogleNyanBig [ 4.402708] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 4.504863] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 4.519787] input: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 4.685009] EXT4-fs (mmcblk0p3): recovery complete [ 4.690603] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 4.698745] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 4.705875] devtmpfs: mounted [ 4.709283] Freeing unused kernel memory: 1024K (c0c00000 - c0d00000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell [ 4.804633] usb 1-3: new high-speed USB device number 3 using tegra-xusb root@(none):/# [ 5.848745] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 6.134633] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 6.283168] usb-storage 1-1:1.0: USB Mass Storage device detected [ 6.289898] scsi host0: usb-storage 1-1:1.0 [ 7.356528] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 7.529132] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 7.538023] sd 0:0:0:0: [sda] Write Protect is off [ 7.542806] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 7.548955] sd 0:0:0:0: [sda] No Caching mode page found [ 7.554256] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 7.579151] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 7.592688] sd 0:0:0:0: [sda] Attached SCSI removable disk mount -t sysfs none /sys root@(none):/# root@(none):/# mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:53 1970 [ 31.865088] PM: Syncing filesystems ... done. [ 31.875051] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 31.883211] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 31.892857] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 31.901493] Suspending console(s) (use no_console_suspend to debug) [ 32.085952] PM: suspend of devices complete after 177.609 msecs [ 32.087262] PM: late suspend of devices complete after 1.300 msecs [ 32.088077] PM: noirq suspend of devices complete after 0.810 msecs [ 32.088079] Disabling non-boot CPUs ... [ 32.114905] CPU1: shutdown [ 32.194724] IRQ17 no longer affine to CPU2 [ 32.194900] CPU2: shutdown [ 32.254917] CPU3: shutdown [ 32.285363] Entering suspend state LP1 [ 32.285376] Enabling non-boot CPUs ... [ 32.335687] CPU1 is up [ 32.385873] CPU2 is up [ 32.436098] CPU3 is up [ 32.436730] PM: noirq resume of devices complete after 0.628 msecs [ 32.438064] PM: early resume of devices complete after 0.832 msecs [ 32.469365] +1.8V_VDDIO: voltage operation not allowed [ 32.469368] mmc1: Switching to 3.3V signalling voltage failed [ 32.624967] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 32.771639] PM: resume of devices complete after 333.565 msecs [ 32.857241] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 33.875344] PM: Syncing filesystems ... done. [ 33.885032] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 33.893229] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 33.902896] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 33.911635] Suspending console(s) (use no_console_suspend to debug) [ 34.095982] PM: suspend of devices complete after 177.485 msecs [ 34.097136] PM: late suspend of devices complete after 1.145 msecs [ 34.097999] PM: noirq suspend of devices complete after 0.858 msecs [ 34.098001] Disabling non-boot CPUs ... [ 34.124891] CPU1: shutdown [ 34.194879] CPU2: shutdown [ 34.254668] IRQ17 no longer affine to CPU3 [ 34.254845] CPU3: shutdown [ 34.285336] Entering suspend state LP1 [ 34.285362] Enabling non-boot CPUs ... [ 34.335672] CPU1 is up [ 34.385847] CPU2 is up [ 34.436069] CPU3 is up [ 34.436664] PM: noirq resume of devices complete after 0.590 msecs [ 34.438572] PM: early resume of devices complete after 1.400 msecs [ 34.469864] +1.8V_VDDIO: voltage operation not allowed [ 34.469868] mmc1: Switching to 3.3V signalling voltage failed [ 34.624933] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 34.771398] PM: resume of devices complete after 332.815 msecs [ 34.857009] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 35.875157] PM: Syncing filesystems ... done. [ 35.884558] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 35.892681] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 35.902282] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 35.911019] Suspending console(s) (use no_console_suspend to debug) [ 36.095902] PM: suspend of devices complete after 178.027 msecs [ 36.096790] PM: late suspend of devices complete after 0.884 msecs [ 36.097605] PM: noirq suspend of devices complete after 0.811 msecs [ 36.097607] Disabling non-boot CPUs ... [ 36.124865] CPU1: shutdown [ 36.194856] CPU2: shutdown [ 36.254817] CPU3: shutdown [ 36.285317] Entering suspend state LP1 [ 36.285343] Enabling non-boot CPUs ... [ 36.335637] CPU1 is up [ 36.385815] CPU2 is up [ 36.436043] CPU3 is up [ 36.436627] PM: noirq resume of devices complete after 0.580 msecs [ 36.438682] PM: early resume of devices complete after 1.560 msecs [ 36.469670] +1.8V_VDDIO: voltage operation not allowed [ 36.469678] mmc1: Switching to 3.3V signalling voltage failed [ 36.624903] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 36.771328] PM: resume of devices complete after 332.636 msecs [ 36.852806] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:08 1970 [ 37.864824] PM: Syncing filesystems ... done. [ 37.874201] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 37.882324] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 37.891990] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 37.900650] Suspending console(s) (use no_console_suspend to debug) [ 38.095876] PM: suspend of devices complete after 188.367 msecs [ 38.096770] PM: late suspend of devices complete after 0.890 msecs [ 38.097592] PM: noirq suspend of devices complete after 0.819 msecs [ 38.097594] Disabling non-boot CPUs ... [ 38.124842] CPU1: shutdown [ 38.194830] CPU2: shutdown [ 38.264795] CPU3: shutdown [ 38.295288] Entering suspend state LP1 [ 38.295313] Enabling non-boot CPUs ... [ 38.345622] CPU1 is up [ 38.395791] CPU2 is up [ 38.446015] CPU3 is up [ 38.446617] PM: noirq resume of devices complete after 0.597 msecs [ 38.448557] PM: early resume of devices complete after 1.428 msecs [ 38.479515] +1.8V_VDDIO: voltage operation not allowed [ 38.479521] mmc1: Switching to 3.3V signalling voltage failed [ 38.546742] PM: resume of devices complete after 98.175 msecs [ 38.621380] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:13 1970 [ 39.874807] PM: Syncing filesystems ... done. [ 39.884346] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 39.892569] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 39.902236] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 39.910896] Suspending console(s) (use no_console_suspend to debug) [ 40.105907] PM: suspend of devices complete after 188.155 msecs [ 40.107524] PM: late suspend of devices complete after 1.607 msecs [ 40.108427] PM: noirq suspend of devices complete after 0.898 msecs [ 40.108429] Disabling non-boot CPUs ... [ 40.134810] CPU1: shutdown [ 40.204626] IRQ17 no longer affine to CPU2 [ 40.204806] CPU2: shutdown [ 40.264764] CPU3: shutdown [ 40.295264] Entering suspend state LP1 [ 40.295290] Enabling non-boot CPUs ... [ 40.345592] CPU1 is up [ 40.395776] CPU2 is up [ 40.445988] CPU3 is up [ 40.446581] PM: noirq resume of devices complete after 0.589 msecs [ 40.448408] PM: early resume of devices complete after 1.337 msecs [ 40.479724] +1.8V_VDDIO: voltage operation not allowed [ 40.479728] mmc1: Switching to 3.3V signalling voltage failed [ 40.634846] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 40.781171] PM: resume of devices complete after 332.753 msecs [ 40.866762] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:18 1970 [ 41.874777] PM: Syncing filesystems ... done. [ 41.884315] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 41.892535] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 41.902200] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 41.910860] Suspending console(s) (use no_console_suspend to debug) [ 42.105880] PM: suspend of devices complete after 188.157 msecs [ 42.107563] PM: late suspend of devices complete after 1.674 msecs [ 42.108371] PM: noirq suspend of devices complete after 0.803 msecs [ 42.108373] Disabling non-boot CPUs ... [ 42.134610] IRQ17 no longer affine to CPU1 [ 42.134789] CPU1: shutdown [ 42.214781] CPU2: shutdown [ 42.274740] CPU3: shutdown [ 42.305240] Entering suspend state LP1 [ 42.305266] Enabling non-boot CPUs ... [ 42.355567] CPU1 is up [ 42.405738] CPU2 is up [ 42.455965] CPU3 is up [ 42.456552] PM: noirq resume of devices complete after 0.582 msecs [ 42.458408] PM: early resume of devices complete after 1.355 msecs [ 42.489541] +1.8V_VDDIO: voltage operation not allowed [ 42.489544] mmc1: Switching to 3.3V signalling voltage failed [ 42.547219] random: nonblocking pool is initialized [ 42.644826] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 42.791183] PM: resume of devices complete after 332.765 msecs [ 42.881597] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:23 1970 [ 43.884756] PM: Syncing filesystems ... done. [ 43.894289] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 43.902491] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 43.912157] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 43.920816] Suspending console(s) (use no_console_suspend to debug) [ 44.115802] PM: suspend of devices complete after 188.133 msecs [ 44.116694] PM: late suspend of devices complete after 0.888 msecs [ 44.117509] PM: noirq suspend of devices complete after 0.811 msecs [ 44.117511] Disabling non-boot CPUs ... [ 44.144767] CPU1: shutdown [ 44.214757] CPU2: shutdown [ 44.274709] CPU3: shutdown [ 44.305216] Entering suspend state LP1 [ 44.305242] Enabling non-boot CPUs ... [ 44.355548] CPU1 is up [ 44.405719] CPU2 is up [ 44.455942] CPU3 is up [ 44.456522] PM: noirq resume of devices complete after 0.575 msecs [ 44.458296] PM: early resume of devices complete after 1.273 msecs [ 44.489391] +1.8V_VDDIO: voltage operation not allowed [ 44.489394] mmc1: Switching to 3.3V signalling voltage failed [ 44.556324] PM: resume of devices complete after 98.019 msecs [ 44.630836] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:28 1970 [ 45.884733] PM: Syncing filesystems ... done. [ 45.894268] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 45.902492] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 45.912158] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 45.920818] Suspending console(s) (use no_console_suspend to debug) [ 46.115832] PM: suspend of devices complete after 188.155 msecs [ 46.116849] PM: late suspend of devices complete after 1.009 msecs [ 46.117702] PM: noirq suspend of devices complete after 0.849 msecs [ 46.117705] Disabling non-boot CPUs ... [ 46.144745] CPU1: shutdown [ 46.214727] CPU2: shutdown [ 46.284688] CPU3: shutdown [ 46.315196] Entering suspend state LP1 [ 46.315222] Enabling non-boot CPUs ... [ 46.365522] CPU1 is up [ 46.415691] CPU2 is up [ 46.465913] CPU3 is up [ 46.466459] PM: noirq resume of devices complete after 0.541 msecs [ 46.468410] PM: early resume of devices complete after 1.432 msecs [ 46.499497] +1.8V_VDDIO: voltage operation not allowed [ 46.499501] mmc1: Switching to 3.3V signalling voltage failed [ 46.654783] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 46.801622] PM: resume of devices complete after 333.202 msecs [ 46.883083] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:33 1970 [ 47.894719] PM: Syncing filesystems ... done. [ 47.904248] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 47.912474] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 47.922138] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 47.930796] Suspending console(s) (use no_console_suspend to debug) [ 48.125751] PM: suspend of devices complete after 188.098 msecs [ 48.126640] PM: late suspend of devices complete after 0.886 msecs [ 48.127456] PM: noirq suspend of devices complete after 0.812 msecs [ 48.127458] Disabling non-boot CPUs ... [ 48.154717] CPU1: shutdown [ 48.224701] CPU2: shutdown [ 48.284666] CPU3: shutdown [ 48.315169] Entering suspend state LP1 [ 48.315195] Enabling non-boot CPUs ... [ 48.365493] CPU1 is up [ 48.415671] CPU2 is up [ 48.465903] CPU3 is up [ 48.466428] PM: noirq resume of devices complete after 0.521 msecs [ 48.468353] PM: early resume of devices complete after 1.407 msecs [ 48.499663] +1.8V_VDDIO: voltage operation not allowed [ 48.499669] mmc1: Switching to 3.3V signalling voltage failed [ 48.568562] PM: resume of devices complete after 100.198 msecs [ 48.643196] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:38 1970 [ 49.894678] PM: Syncing filesystems ... done. [ 49.904056] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 49.912269] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 49.921935] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 49.930597] Suspending console(s) (use no_console_suspend to debug) [ 50.125726] PM: suspend of devices complete after 188.272 msecs [ 50.126618] PM: late suspend of devices complete after 0.888 msecs [ 50.127436] PM: noirq suspend of devices complete after 0.814 msecs [ 50.127437] Disabling non-boot CPUs ... [ 50.154692] CPU1: shutdown [ 50.234679] CPU2: shutdown [ 50.294640] CPU3: shutdown [ 50.325137] Entering suspend state LP1 [ 50.325164] Enabling non-boot CPUs ... [ 50.375472] CPU1 is up [ 50.425650] CPU2 is up [ 50.475876] CPU3 is up [ 50.476402] PM: noirq resume of devices complete after 0.522 msecs [ 50.478393] PM: early resume of devices complete after 1.484 msecs [ 50.510111] +1.8V_VDDIO: voltage operation not allowed [ 50.510114] mmc1: Switching to 3.3V signalling voltage failed [ 50.664645] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 50.810784] PM: resume of devices complete after 332.381 msecs [ 50.892251] Restarting tasks ... done. root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE