U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 3.5 MiB/s done Bytes transferred = 5547016 (54a408 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.2 MiB/s done Bytes transferred = 66901 (10555 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x54a408 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013554 Starting kernel ... [ 2.515522] console [ttyS0] enabled [ 2.518997] bootconsole [earlycon0] disabled [ 2.524340] [drm] Initialized drm 1.1.0 20060810 [ 2.529675] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 2.536275] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 2.543569] panel supply power not found, using dummy regulator [ 2.574950] loop: module loaded [ 2.578695] as3722 4-0040: AS3722 with revision 0x1 found [ 2.588889] as3722-sd2: supplied by +5V_SYS [ 2.593398] as3722-sd3: supplied by +5V_SYS [ 2.597747] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 2.604007] as3722-sd4: supplied by +5V_SYS [ 2.608350] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 2.614175] as3722-sd5: supplied by +5V_SYS [ 2.619961] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.625799] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 2.631908] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.637636] as3722-ldo3: supplied by +3.3V_SYS [ 2.642086] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 2.649753] as3722-ldo4: supplied by +3.3V_SYS [ 2.654349] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 2.660462] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.665243] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 2.672023] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 2.678159] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.682932] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.689580] as3722-ldo9: supplied by +5V_SYS [ 2.694149] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.700454] as3722-ldo10: supplied by +5V_SYS [ 2.704970] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.711506] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.751811] cros-ec-spi spi32766.0: Chrome EC device registered [ 2.767249] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 2.773439] CAN device driver interface [ 2.777320] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 2.784264] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.789950] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 2.797399] usbcore: registered new interface driver pegasus [ 2.803096] usbcore: registered new interface driver asix [ 2.808538] usbcore: registered new interface driver ax88179_178a [ 2.814670] usbcore: registered new interface driver cdc_ether [ 2.820542] usbcore: registered new interface driver smsc75xx [ 2.826336] usbcore: registered new interface driver smsc95xx [ 2.832105] usbcore: registered new interface driver net1080 [ 2.837794] usbcore: registered new interface driver cdc_subset [ 2.843735] usbcore: registered new interface driver zaurus [ 2.849355] usbcore: registered new interface driver cdc_ncm [ 2.855107] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.861617] ehci-pci: EHCI PCI platform driver [ 2.866096] tegra-ehci: Tegra EHCI driver [ 2.870438] usbcore: registered new interface driver cdc_acm [ 2.876088] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.884111] usbcore: registered new interface driver cdc_wdm [ 2.889817] usbcore: registered new interface driver usb-storage [ 2.896083] mousedev: PS/2 mouse device common for all mice [ 2.901958] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi32766/spi32766.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 2.927006] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 2.933864] as3722-rtc as3722-rtc: RTC interrupt 370 [ 2.940693] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 2.947847] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 2.954153] i2c /dev entries driver [ 2.958399] usbcore: registered new interface driver uvcvideo [ 2.964129] USB Video Class driver (1.1.1) [ 2.968220] gspca_main: v2.14.0 registered [ 2.972606] 0-004c supply vcc not found, using dummy regulator [ 2.980387] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 2.988817] sdhci: Secure Digital Host Controller Interface driver [ 2.994992] sdhci: Copyright(c) Pierre Ossman [ 2.999334] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.005141] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 3.010800] mmc0: Unknown controller version (3). You may experience problems. [ 3.018196] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 3.023067] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 3.027965] mmc0: Unknown controller version (3). You may experience problems. [ 3.035316] mmc0: Unknown controller version (3). You may experience problems. [ 3.042553] mmc0: Invalid maximum block size, assuming 512 bytes [ 3.084604] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 3.095146] usbcore: registered new interface driver usbhid [ 3.103767] usbhid: USB HID core driver [ 3.114659] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 3.145053] max98090 0-0010: MAX98090 REVID=0x43 [ 3.152407] max98090 0-0010: use default 2.8v micbias [ 3.155065] mmc0: new high speed MMC card at address 0001 [ 3.157613] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 3.157829] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 3.158026] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 3.158200] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 3.165859] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 3.193502] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 3.201297] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 3.209392] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 3.424577] NET: Registered protocol family 10 [ 3.544589] mip6: Mobile IPv6 [ 3.547548] sit: IPv6 over IPv4 tunneling driver [ 3.553203] NET: Registered protocol family 17 [ 3.557658] NET: Registered protocol family 15 [ 3.562089] can: controller area network core (rev 20120528 abi 9) [ 3.594619] NET: Registered protocol family 29 [ 3.599051] can: raw protocol (rev 20120528) [ 3.603309] can: broadcast manager protocol (rev 20120528 t) [ 3.608966] can: netlink gateway (rev 20130117) max_hops=1 [ 3.615202] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3 [ 3.634622] Bluetooth: RFCOMM socket layer initialized [ 3.639751] Bluetooth: RFCOMM ver 1.11 [ 3.643491] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.648823] Bluetooth: BNEP socket layer initialized [ 3.653774] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.659689] Bluetooth: HIDP socket layer initialized [ 3.664784] Key type dns_resolver registered [ 3.669502] Registering SWP/SWPB emulation handler [ 3.675347] +3.3V_RUN: supplied by +3.3V_SYS [ 3.680203] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 3.685861] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 3.690510] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 3.695158] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 3.700332] +VDD_LED: supplied by +VDD_MUX [ 3.704806] +5V_VDD_TS_SW: supplied by +5V_SYS [ 3.709522] +5V_USB_HS: supplied by +5V_SYS [ 3.713911] +5V_USB_SS: supplied by +5V_SYS [ 3.719170] +3.3V_PANEL: supplied by +3.3V_RUN [ 3.724370] +3.3V_LP0: supplied by +3.3V_SYS [ 3.729432] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.735450] +5V_HDMI_CON: supplied by +5V_SYS [ 3.740923] usb3-0 supply vbus not found, using dummy regulator [ 3.746998] usb3-1 supply vbus not found, using dummy regulator [ 3.755249] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.761458] panel supply power not found, using dummy regulator [ 3.825322] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 3.832732] tegra-xusb 70090000.usb: xHCI Host Controller [ 3.838166] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 3.847728] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 3.856363] tegra-xusb 70090000.usb: irq 342, io mem 0x70090000 [ 3.862911] hub 1-0:1.0: USB hub found [ 3.866693] hub 1-0:1.0: 6 ports detected [ 3.871431] tegra-xusb 70090000.usb: xHCI Host Controller [ 3.876868] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 3.884551] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.893362] hub 2-0:1.0: USB hub found [ 3.897177] hub 2-0:1.0: 2 ports detected [ 3.902291] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 3.908019] mmc1: Unknown controller version (3). You may experience problems. [ 3.915445] mmc1: Invalid maximum block size, assuming 512 bytes [ 3.922006] +1.8V_VDDIO: voltage operation not allowed [ 3.927182] mmc1: Switching to 3.3V signalling voltage failed [ 3.964721] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit [ 3.972942] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 3.977914] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 3.982953] mmc2: Unknown controller version (3). You may experience problems. [ 3.994772] mmc2: Invalid maximum block size, assuming 512 bytes [ 4.027632] mmc1: new high speed SDIO card at address 0001 [ 4.044992] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 4.151494] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.158120] [drm] No driver support for vblank timestamp query. [ 4.184613] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 4.196998] mmc2: new high speed SDHC card at address 0007 [ 4.207849] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 4.217770] GPT:Primary header alternate_lba != Alt. header my_lba [ 4.217777] GPT:3014591 != 15564799 [ 4.217779] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 4.217781] GPT:3014591 != 15564799 [ 4.217782] GPT: Use GNU Parted to correct GPT errors. [ 4.217824] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 4.221506] Console: switching to colour frame buffer device 170x48 [ 4.279655] drm drm: fb0: frame buffer device [ 4.314669] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.321100] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 4.328556] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 4.342992] +1.8V_RUN_CAM: disabling [ 4.346807] +1.2V_RUN_CAM_FRONT: disabling [ 4.351062] +1.05V_RUN_CAM_REAR: disabling [ 4.355353] +2.8V_RUN_TOUCH: disabling [ 4.359259] +2.8V_RUN_CAM_AF: disabling [ 4.363249] +1.8V_RUN_VPP_FUSE: disabling [ 4.367462] +5V_VDD_TS_SW: disabling [ 4.371219] ALSA device list: [ 4.374177] #0: tegra-hda at 0x70038000 irq 341 [ 4.378921] #1: GoogleNyanBig [ 4.382837] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 4.475674] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 4.490564] input: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 4.774666] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 4.934848] EXT4-fs (mmcblk0p3): recovery complete [ 4.939635] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 4.949504] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 4.957108] devtmpfs: mounted [ 4.960531] Freeing unused kernel memory: 1024K (c0c00000 - c0d00000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 5.777810] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 6.064661] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 6.213117] usb-storage 1-1:1.0: USB Mass Storage device detected [ 6.219874] scsi host0: usb-storage 1-1:1.0 [ 7.276708] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 7.449501] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 7.458210] sd 0:0:0:0: [sda] Write Protect is off [ 7.463004] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 7.469209] sd 0:0:0:0: [sda] No Caching mode page found [ 7.474512] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 7.500613] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 7.514504] sd 0:0:0:0: [sda] Attached SCSI removable disk mount -t sysfs none /sys root@(none):/# root@(none):/# mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:52 1970 [ 31.843744] PM: Syncing filesystems ... done. [ 31.853634] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 31.861805] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 31.871453] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 31.880096] Suspending console(s) (use no_console_suspend to debug) [ 32.066035] PM: suspend of devices complete after 179.065 msecs [ 32.067649] PM: late suspend of devices complete after 1.604 msecs [ 32.068461] PM: noirq suspend of devices complete after 0.807 msecs [ 32.068463] Disabling non-boot CPUs ... [ 32.104761] IRQ17 no longer affine to CPU1 [ 32.104922] CPU1: shutdown [ 32.184987] CPU2: shutdown [ 32.244951] CPU3: shutdown [ 32.275393] Entering suspend state LP1 [ 32.275407] Enabling non-boot CPUs ... [ 32.325738] CPU1 is up [ 32.375884] CPU2 is up [ 32.426121] CPU3 is up [ 32.426659] PM: noirq resume of devices complete after 0.533 msecs [ 32.428558] PM: early resume of devices complete after 1.387 msecs [ 32.459957] +1.8V_VDDIO: voltage operation not allowed [ 32.459959] mmc1: Switching to 3.3V signalling voltage failed [ 32.594959] PM: resume of devices complete after 166.392 msecs [ 32.673965] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:57 1970 [ 33.835255] PM: Syncing filesystems ... done. [ 33.844715] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 33.852890] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 33.862567] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 33.871235] Suspending console(s) (use no_console_suspend to debug) [ 34.065958] PM: suspend of devices complete after 187.849 msecs [ 34.066846] PM: late suspend of devices complete after 0.883 msecs [ 34.067659] PM: noirq suspend of devices complete after 0.810 msecs [ 34.067661] Disabling non-boot CPUs ... [ 34.094917] CPU1: shutdown [ 34.154900] CPU2: shutdown [ 34.224717] IRQ17 no longer affine to CPU3 [ 34.224893] CPU3: shutdown [ 34.275363] Entering suspend state LP1 [ 34.275388] Enabling non-boot CPUs ... [ 34.325706] CPU1 is up [ 34.375875] CPU2 is up [ 34.426098] CPU3 is up [ 34.426676] PM: noirq resume of devices complete after 0.573 msecs [ 34.428556] PM: early resume of devices complete after 1.387 msecs [ 34.459689] +1.8V_VDDIO: voltage operation not allowed [ 34.459691] mmc1: Switching to 3.3V signalling voltage failed [ 34.614963] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 34.761382] PM: resume of devices complete after 332.815 msecs [ 34.846933] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:02 1970 [ 35.834747] PM: Syncing filesystems ... done. [ 35.844364] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 35.852590] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 35.862268] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 35.870927] Suspending console(s) (use no_console_suspend to debug) [ 36.065932] PM: suspend of devices complete after 188.128 msecs [ 36.066819] PM: late suspend of devices complete after 0.882 msecs [ 36.067642] PM: noirq suspend of devices complete after 0.820 msecs [ 36.067645] Disabling non-boot CPUs ... [ 36.094892] CPU1: shutdown [ 36.154880] CPU2: shutdown [ 36.214673] IRQ17 no longer affine to CPU3 [ 36.214848] CPU3: shutdown [ 36.245343] Entering suspend state LP1 [ 36.245369] Enabling non-boot CPUs ... [ 36.295689] CPU1 is up [ 36.345841] CPU2 is up [ 36.396073] CPU3 is up [ 36.396661] PM: noirq resume of devices complete after 0.583 msecs [ 36.398429] PM: early resume of devices complete after 1.281 msecs [ 36.429860] +1.8V_VDDIO: voltage operation not allowed [ 36.429863] mmc1: Switching to 3.3V signalling voltage failed [ 36.584928] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 36.731589] PM: resume of devices complete after 333.151 msecs [ 36.817134] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:07 1970 [ 37.804614] PM: Syncing filesystems ... done. [ 37.814228] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 37.822452] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 37.832135] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 37.840796] Suspending console(s) (use no_console_suspend to debug) [ 38.035904] PM: suspend of devices complete after 188.235 msecs [ 38.036791] PM: late suspend of devices complete after 0.882 msecs [ 38.037615] PM: noirq suspend of devices complete after 0.820 msecs [ 38.037617] Disabling non-boot CPUs ... [ 38.064863] CPU1: shutdown [ 38.124850] CPU2: shutdown [ 38.184649] IRQ17 no longer affine to CPU3 [ 38.184827] CPU3: shutdown [ 38.215314] Entering suspend state LP1 [ 38.215340] Enabling non-boot CPUs ... [ 38.265658] CPU1 is up [ 38.315815] CPU2 is up [ 38.366051] CPU3 is up [ 38.366613] PM: noirq resume of devices complete after 0.557 msecs [ 38.368451] PM: early resume of devices complete after 1.332 msecs [ 38.399617] +1.8V_VDDIO: voltage operation not allowed [ 38.399620] mmc1: Switching to 3.3V signalling voltage failed [ 39.424614] PM: resume of devices complete after 1056.153 msecs [ 39.503418] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:13 1970 [ 40.774891] PM: Syncing filesystems ... done. [ 40.784546] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 40.792752] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 40.802428] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 40.811091] Suspending console(s) (use no_console_suspend to debug) [ 41.005934] PM: suspend of devices complete after 187.969 msecs [ 41.007124] PM: late suspend of devices complete after 1.181 msecs [ 41.007940] PM: noirq suspend of devices complete after 0.811 msecs [ 41.007941] Disabling non-boot CPUs ... [ 41.034838] CPU1: shutdown [ 41.094821] CPU2: shutdown [ 41.154792] CPU3: shutdown [ 41.185294] Entering suspend state LP1 [ 41.185320] Enabling non-boot CPUs ... [ 41.235642] CPU1 is up [ 41.285792] CPU2 is up [ 41.336028] CPU3 is up [ 41.336579] PM: noirq resume of devices complete after 0.546 msecs [ 41.338257] PM: early resume of devices complete after 1.187 msecs [ 41.369657] +1.8V_VDDIO: voltage operation not allowed [ 41.369661] mmc1: Switching to 3.3V signalling voltage failed [ 41.438859] PM: resume of devices complete after 100.591 msecs [ 41.513549] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 [ 42.664519] random: nonblocking pool is initialized rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:18 1970 [ 42.754843] PM: Syncing filesystems ... done. [ 42.764471] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 42.772669] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 42.782324] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 42.791069] Suspending console(s) (use no_console_suspend to debug) [ 42.975897] PM: suspend of devices complete after 177.965 msecs [ 42.977046] PM: late suspend of devices complete after 1.140 msecs [ 42.977834] PM: noirq suspend of devices complete after 0.783 msecs [ 42.977836] Disabling non-boot CPUs ... [ 43.004818] CPU1: shutdown [ 43.064798] CPU2: shutdown [ 43.124770] CPU3: shutdown [ 43.155265] Entering suspend state LP1 [ 43.155291] Enabling non-boot CPUs ... [ 43.205612] CPU1 is up [ 43.255764] CPU2 is up [ 43.306007] CPU3 is up [ 43.306555] PM: noirq resume of devices complete after 0.544 msecs [ 43.308164] PM: early resume of devices complete after 1.093 msecs [ 43.340083] +1.8V_VDDIO: voltage operation not allowed [ 43.340086] mmc1: Switching to 3.3V signalling voltage failed [ 43.407213] PM: resume of devices complete after 99.039 msecs [ 43.481867] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:23 1970 [ 44.714640] PM: Syncing filesystems ... done. [ 44.724245] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 44.732462] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 44.742138] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 44.750798] Suspending console(s) (use no_console_suspend to debug) [ 44.945881] PM: suspend of devices complete after 188.211 msecs [ 44.947560] PM: late suspend of devices complete after 1.670 msecs [ 44.948365] PM: noirq suspend of devices complete after 0.800 msecs [ 44.948367] Disabling non-boot CPUs ... [ 44.974618] IRQ17 no longer affine to CPU1 [ 44.974793] CPU1: shutdown [ 45.034775] CPU2: shutdown [ 45.094741] CPU3: shutdown [ 45.125237] Entering suspend state LP1 [ 45.125263] Enabling non-boot CPUs ... [ 45.175584] CPU1 is up [ 45.225740] CPU2 is up [ 45.275984] CPU3 is up [ 45.276532] PM: noirq resume of devices complete after 0.544 msecs [ 45.278363] PM: early resume of devices complete after 1.318 msecs [ 45.309514] +1.8V_VDDIO: voltage operation not allowed [ 45.309518] mmc1: Switching to 3.3V signalling voltage failed [ 45.376873] PM: resume of devices complete after 98.500 msecs [ 45.455740] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:28 1970 [ 46.684753] PM: Syncing filesystems ... done. [ 46.694215] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 46.702427] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 46.712105] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 46.720764] Suspending console(s) (use no_console_suspend to debug) [ 46.915804] PM: suspend of devices complete after 188.166 msecs [ 46.916686] PM: late suspend of devices complete after 0.877 msecs [ 46.917496] PM: noirq suspend of devices complete after 0.806 msecs [ 46.917498] Disabling non-boot CPUs ... [ 46.944772] CPU1: shutdown [ 47.004571] IRQ17 no longer affine to CPU2 [ 47.004753] CPU2: shutdown [ 47.064712] CPU3: shutdown [ 47.095223] Entering suspend state LP1 [ 47.095249] Enabling non-boot CPUs ... [ 47.145558] CPU1 is up [ 47.195711] CPU2 is up [ 47.245946] CPU3 is up [ 47.246497] PM: noirq resume of devices complete after 0.547 msecs [ 47.248364] PM: early resume of devices complete after 1.372 msecs [ 47.279734] +1.8V_VDDIO: voltage operation not allowed [ 47.279737] mmc1: Switching to 3.3V signalling voltage failed [ 47.434807] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 47.581166] PM: resume of devices complete after 332.792 msecs [ 47.666760] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:33 1970 [ 48.654596] PM: Syncing filesystems ... done. [ 48.664203] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 48.672321] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 48.681915] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 48.690552] Suspending console(s) (use no_console_suspend to debug) [ 48.885832] PM: suspend of devices complete after 188.405 msecs [ 48.887424] PM: late suspend of devices complete after 1.583 msecs [ 48.888341] PM: noirq suspend of devices complete after 0.912 msecs [ 48.888343] Disabling non-boot CPUs ... [ 48.914736] CPU1: shutdown [ 48.984736] CPU2: shutdown [ 49.044524] IRQ17 no longer affine to CPU3 [ 49.044703] CPU3: shutdown [ 49.075198] Entering suspend state LP1 [ 49.075224] Enabling non-boot CPUs ... [ 49.125525] CPU1 is up [ 49.175694] CPU2 is up [ 49.225927] CPU3 is up [ 49.226485] PM: noirq resume of devices complete after 0.553 msecs [ 49.228347] PM: early resume of devices complete after 1.373 msecs [ 49.259615] +1.8V_VDDIO: voltage operation not allowed [ 49.259622] mmc1: Switching to 3.3V signalling voltage failed [ 49.414771] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 49.561316] PM: resume of devices complete after 332.960 msecs [ 49.646897] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:38 1970 [ 50.634464] PM: Syncing filesystems ... done. [ 50.644085] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 50.652224] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 50.661829] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 50.670470] Suspending console(s) (use no_console_suspend to debug) [ 50.865808] PM: suspend of devices complete after 188.465 msecs [ 50.866944] PM: late suspend of devices complete after 1.128 msecs [ 50.867810] PM: noirq suspend of devices complete after 0.861 msecs [ 50.867812] Disabling non-boot CPUs ... [ 50.894548] IRQ17 no longer affine to CPU1 [ 50.894726] CPU1: shutdown [ 50.954702] CPU2: shutdown [ 51.014667] CPU3: shutdown [ 51.045179] Entering suspend state LP1 [ 51.045204] Enabling non-boot CPUs ... [ 51.095505] CPU1 is up [ 51.145669] CPU2 is up [ 51.195903] CPU3 is up [ 51.196469] PM: noirq resume of devices complete after 0.561 msecs [ 51.198271] PM: early resume of devices complete after 1.286 msecs [ 51.229884] +1.8V_VDDIO: voltage operation not allowed [ 51.229887] mmc1: Switching to 3.3V signalling voltage failed [ 51.384752] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 51.531137] PM: resume of devices complete after 332.857 msecs [ 51.616960] Restarting tasks ... done. root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE