U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################### 3.5 MiB/s done Bytes transferred = 7240744 (6e7c28 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 66901 (10555 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6e7c28 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013554 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.7.0-rc6-96657-ga99cde4 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jul 3 23:34:53 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c141bb00, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 13 pages/cpu @eef89000 s23808 r8192 d21248 u53248 [ 0.000000] pcpu-alloc: s23808 r8192 d21248 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1996016K/2097148K available (9529K kernel code, 1142K rwdata, 4476K rodata, 2048K init, 343K bss, 35596K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc10ad560 (14998 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc141db60 (1143 kB) [ 0.000000] .bss : 0xc141f000 - 0xc1474ce0 ( 344 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000013] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000019] Switching to timer-based delay loop, resolution 1000ns [ 0.001793] Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.001800] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001806] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001810] Switching to timer-based delay loop, resolution 83ns [ 0.002015] Console: colour dummy device 80x30 [ 0.002028] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000) [ 0.002033] pid_max: default: 32768 minimum: 301 [ 0.002072] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002076] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002320] CPU: Testing write buffer coherency: ok [ 0.002433] /cpus/cpu@0 missing clock-frequency property [ 0.002448] /cpus/cpu@1 missing clock-frequency property [ 0.002462] /cpus/cpu@2 missing clock-frequency property [ 0.002476] /cpus/cpu@3 missing clock-frequency property [ 0.002481] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002491] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.003768] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004370] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006966] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.011965] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.016686] Brought up 4 CPUs [ 0.016694] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.016696] CPU: All CPU(s) started in SVC mode. [ 0.017241] devtmpfs: initialized [ 0.023672] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.023943] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.024476] pinctrl core: initialized pinctrl subsystem [ 0.025142] NET: Registered protocol family 16 [ 0.025816] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.036721] cpuidle: using governor menu [ 0.043133] No ATAGs? [ 0.043145] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.043149] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.045242] Serial: AMBA PL011 UART driver [ 0.046203] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.063454] +5V_SYS: supplied by +VDD_MUX [ 0.063560] +3.3V_SYS: supplied by +VDD_MUX [ 0.063780] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.063786] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.063816] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.063821] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.063851] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.063855] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.063885] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.063889] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.063967] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.063972] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.064000] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.064004] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.065115] vgaarb: loaded [ 0.065398] SCSI subsystem initialized [ 0.065461] libata version 3.00 loaded. [ 0.065562] usbcore: registered new interface driver usbfs [ 0.065585] usbcore: registered new interface driver hub [ 0.065611] usbcore: registered new device driver usb [ 0.067000] pps_core: LinuxPPS API ver. 1 registered [ 0.067004] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.067012] PTP clock support registered [ 0.067084] EDAC MC: Ver: 3.0.0 [ 0.067514] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.067522] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.068005] clocksource: Switched to clocksource arch_sys_counter [ 0.071642] NET: Registered protocol family 2 [ 0.071854] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.071888] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.071950] TCP: Hash tables configured (established 8192 bind 8192) [ 0.071972] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.071986] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.072046] NET: Registered protocol family 1 [ 0.072148] RPC: Registered named UNIX socket transport module. [ 0.072151] RPC: Registered udp transport module. [ 0.072154] RPC: Registered tcp transport module. [ 0.072157] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.072161] PCI: CLS 0 bytes, default 64 [ 0.072603] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.073157] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.073440] workingset: timestamp_bits=28 max_order=19 bucket_order=0 [ 0.077209] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.077514] NFS: Registering the id_resolver key type [ 0.077528] Key type id_resolver registered [ 0.077531] Key type id_legacy registered [ 0.077547] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.078029] bounce: pool size: 64 pages [ 0.078102] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.078107] io scheduler noop registered [ 0.078110] io scheduler deadline registered [ 0.078120] io scheduler cfq registered (default) [ 0.080025] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.088938] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.089629] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.110487] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.111627] console [ttyS0] disabled [ 0.111642] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 0.964524] console [ttyS0] enabled [ 0.968314] SuperH (H)SCI(F) driver initialized [ 0.973197] msm_serial: driver initialized [ 0.977346] STMicroelectronics ASC driver initialized [ 0.983821] [drm] Initialized drm 1.1.0 20060810 [ 0.989845] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 0.996397] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.003624] panel supply power not found, using dummy regulator [ 1.013323] brd: module loaded [ 1.018477] loop: module loaded [ 1.022514] as3722 4-0040: AS3722 with revision 0x1 found [ 1.032221] as3722-sd2: supplied by +5V_SYS [ 1.036673] as3722-sd3: supplied by +5V_SYS [ 1.041010] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.047197] as3722-sd4: supplied by +5V_SYS [ 1.051533] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.057280] as3722-sd5: supplied by +5V_SYS [ 1.062869] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.068611] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.074638] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.080255] as3722-ldo3: supplied by +3.3V_SYS [ 1.084707] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.092284] as3722-ldo4: supplied by +3.3V_SYS [ 1.096880] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.102905] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.107674] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.114366] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.120400] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.125169] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.131731] as3722-ldo9: supplied by +5V_SYS [ 1.136295] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.142502] as3722-ldo10: supplied by +5V_SYS [ 1.147011] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.153455] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.171702] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.177973] libphy: Fixed MDIO Bus: probed [ 1.182311] CAN device driver interface [ 1.186857] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.193807] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.200534] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.207943] usbcore: registered new interface driver pegasus [ 1.213613] usbcore: registered new interface driver asix [ 1.219018] usbcore: registered new interface driver ax88179_178a [ 1.225113] usbcore: registered new interface driver cdc_ether [ 1.230956] usbcore: registered new interface driver smsc75xx [ 1.236712] usbcore: registered new interface driver smsc95xx [ 1.242462] usbcore: registered new interface driver net1080 [ 1.248128] usbcore: registered new interface driver cdc_subset [ 1.254051] usbcore: registered new interface driver zaurus [ 1.259640] usbcore: registered new interface driver cdc_ncm [ 1.266008] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.272525] ehci-pci: EHCI PCI platform driver [ 1.276975] ehci-platform: EHCI generic platform driver [ 1.282265] ehci-omap: OMAP-EHCI Host Controller driver [ 1.287530] ehci-orion: EHCI orion driver [ 1.291585] SPEAr-ehci: EHCI SPEAr driver [ 1.295642] ehci-st: EHCI STMicroelectronics driver [ 1.300563] ehci-exynos: EHCI EXYNOS driver [ 1.304798] ehci-atmel: EHCI Atmel driver [ 1.308850] tegra-ehci: Tegra EHCI driver [ 1.312913] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.319087] ohci-pci: OHCI PCI platform driver [ 1.323537] ohci-platform: OHCI generic platform driver [ 1.328811] ohci-omap3: OHCI OMAP3 driver [ 1.332856] SPEAr-ohci: OHCI SPEAr driver [ 1.336909] ohci-st: OHCI STMicroelectronics driver [ 1.341829] ohci-atmel: OHCI Atmel driver [ 1.346101] usbcore: registered new interface driver usb-storage [ 1.352691] mousedev: PS/2 mouse device common for all mice [ 1.358664] 1-0015 supply vcc not found, using dummy regulator [ 1.360474] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.360477] as3722-rtc as3722-rtc: RTC interrupt 370 [ 1.362732] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.362755] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.363055] i2c /dev entries driver [ 1.366399] 0-004c supply vcc not found, using dummy regulator [ 1.401601] sdhci: Secure Digital Host Controller Interface driver [ 1.407774] sdhci: Copyright(c) Pierre Ossman [ 1.412685] Synopsys Designware Multimedia Card Interface Driver [ 1.419082] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.425031] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.430696] mmc0: Unknown controller version (3). You may experience problems. [ 1.438061] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.442931] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.447821] mmc0: Unknown controller version (3). You may experience problems. [ 1.455141] mmc0: Unknown controller version (3). You may experience problems. [ 1.462383] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.503016] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 1.511615] ledtrig-cpu: registered to indicate activity on CPUs [ 1.517746] usbcore: registered new interface driver usbhid [ 1.523316] usbhid: USB HID core driver [ 1.529236] NET: Registered protocol family 10 [ 1.533976] sit: IPv6 over IPv4 tunneling driver [ 1.538918] NET: Registered protocol family 17 [ 1.543366] can: controller area network core (rev 20120528 abi 9) [ 1.549567] NET: Registered protocol family 29 [ 1.554009] can: raw protocol (rev 20120528) [ 1.558277] can: broadcast manager protocol (rev 20120528 t) [ 1.563936] can: netlink gateway (rev 20130117) max_hops=1 [ 1.569575] Key type dns_resolver registered [ 1.574080] ThumbEE CPU extension supported. [ 1.578357] Registering SWP/SWPB emulation handler [ 1.585110] +3.3V_RUN: supplied by +3.3V_SYS [ 1.590154] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.595885] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.597809] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 1.608753] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.613497] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.618827] +VDD_LED: supplied by +VDD_MUX [ 1.623228] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.627953] +5V_USB_HS: supplied by +5V_SYS [ 1.632493] +5V_USB_SS: supplied by +5V_SYS [ 1.634775] mmc0: new high speed MMC card at address 0001 [ 1.635521] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.636083] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.636627] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.636971] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 1.643242] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.670840] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.676062] +3.3V_LP0: supplied by +3.3V_SYS [ 1.681024] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.681300] elan_i2c 1-0015: failed to read report data: -121 [ 1.692798] +5V_HDMI_CON: supplied by +5V_SYS [ 1.698085] usb3-0 supply vbus not found, using dummy regulator [ 1.704115] usb3-1 supply vbus not found, using dummy regulator [ 1.713524] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.720265] panel supply power not found, using dummy regulator [ 1.727225] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.732930] mmc1: Unknown controller version (3). You may experience problems. [ 1.740377] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.746696] +1.8V_VDDIO: voltage operation not allowed [ 1.751864] mmc1: Switching to 3.3V signalling voltage failed [ 1.783096] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit [ 1.791841] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.796741] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.801651] mmc2: Unknown controller version (3). You may experience problems. [ 1.809063] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.820955] elan_i2c 1-0015: invalid report id data (ff) [ 1.848585] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 1.876052] mmc1: new high speed SDIO card at address 0001 [ 1.953214] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.959832] [drm] No driver support for vblank timestamp query. [ 2.005114] mmc2: new high speed SDHC card at address 0007 [ 2.005382] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.013467] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.013471] GPT:3014591 != 15564799 [ 2.013473] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.013474] GPT:3014591 != 15564799 [ 2.013474] GPT: Use GNU Parted to correct GPT errors. [ 2.013500] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.021275] Console: switching to colour frame buffer device 170x48 [ 2.072709] drm drm: fb0: frame buffer device [ 2.088094] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.094964] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.102390] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.115043] +1.8V_RUN_CAM: disabling [ 2.118840] +3.3V_RUN_CAM: disabling [ 2.122615] +1.2V_RUN_CAM_FRONT: disabling [ 2.126891] +1.05V_RUN_CAM_REAR: disabling [ 2.131187] +2.8V_RUN_TOUCH: disabling [ 2.135109] +2.8V_RUN_CAM_AF: disabling [ 2.139121] +1.8V_RUN_VPP_FUSE: disabling [ 2.143308] +5V_VDD_TS_SW: disabling [ 2.146882] +5V_USB_HS: disabling [ 2.150213] +5V_USB_SS: disabling [ 2.154534] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.163151] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.689242] EXT4-fs (mmcblk0p3): recovery complete [ 2.694979] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.703111] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.710322] devtmpfs: mounted [ 2.714015] Freeing unused kernel memory: 2048K (c1100000 - c1300000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#