U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##################################################### 3.6 MiB/s done Bytes transferred = 5545488 (549e10 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 66901 (10555 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x549e10 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013554 Starting kernel ... [ 2.515611] console [ttyS0] enabled [ 2.519087] bootconsole [earlycon0] disabled [ 2.524435] [drm] Initialized drm 1.1.0 20060810 [ 2.529769] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 2.536370] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 2.543667] panel supply power not found, using dummy regulator [ 2.575055] loop: module loaded [ 2.578800] as3722 4-0040: AS3722 with revision 0x1 found [ 2.589019] as3722-sd2: supplied by +5V_SYS [ 2.593528] as3722-sd3: supplied by +5V_SYS [ 2.597878] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 2.604140] as3722-sd4: supplied by +5V_SYS [ 2.608484] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 2.614311] as3722-sd5: supplied by +5V_SYS [ 2.620100] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.625939] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 2.632048] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.637780] as3722-ldo3: supplied by +3.3V_SYS [ 2.642231] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 2.649900] as3722-ldo4: supplied by +3.3V_SYS [ 2.654498] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 2.660611] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.665394] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 2.672175] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 2.678311] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.683084] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.689733] as3722-ldo9: supplied by +5V_SYS [ 2.694304] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.700609] as3722-ldo10: supplied by +5V_SYS [ 2.705126] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.711663] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.751761] cros-ec-spi spi32766.0: Chrome EC device registered [ 2.767251] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 2.773441] CAN device driver interface [ 2.777323] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 2.784266] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.789952] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 2.797402] usbcore: registered new interface driver pegasus [ 2.803100] usbcore: registered new interface driver asix [ 2.808541] usbcore: registered new interface driver ax88179_178a [ 2.814674] usbcore: registered new interface driver cdc_ether [ 2.820545] usbcore: registered new interface driver smsc75xx [ 2.826340] usbcore: registered new interface driver smsc95xx [ 2.832108] usbcore: registered new interface driver net1080 [ 2.837798] usbcore: registered new interface driver cdc_subset [ 2.843740] usbcore: registered new interface driver zaurus [ 2.849361] usbcore: registered new interface driver cdc_ncm [ 2.855113] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.861623] ehci-pci: EHCI PCI platform driver [ 2.866104] tegra-ehci: Tegra EHCI driver [ 2.870446] usbcore: registered new interface driver cdc_acm [ 2.876097] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.884120] usbcore: registered new interface driver cdc_wdm [ 2.889824] usbcore: registered new interface driver usb-storage [ 2.896096] mousedev: PS/2 mouse device common for all mice [ 2.901969] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi32766/spi32766.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 2.917012] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 2.923870] as3722-rtc as3722-rtc: RTC interrupt 370 [ 2.930695] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 2.937852] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 2.944157] i2c /dev entries driver [ 2.948411] usbcore: registered new interface driver uvcvideo [ 2.954141] USB Video Class driver (1.1.1) [ 2.958233] gspca_main: v2.14.0 registered [ 2.962618] 0-004c supply vcc not found, using dummy regulator [ 2.970406] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 2.978834] sdhci: Secure Digital Host Controller Interface driver [ 2.985008] sdhci: Copyright(c) Pierre Ossman [ 2.989352] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.995156] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 3.000814] mmc0: Unknown controller version (3). You may experience problems. [ 3.008216] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 3.013087] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 3.017985] mmc0: Unknown controller version (3). You may experience problems. [ 3.025339] mmc0: Unknown controller version (3). You may experience problems. [ 3.032577] mmc0: Invalid maximum block size, assuming 512 bytes [ 3.074637] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 3.085182] usbcore: registered new interface driver usbhid [ 3.093802] usbhid: USB HID core driver [ 3.104694] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 3.135087] max98090 0-0010: MAX98090 REVID=0x43 [ 3.142445] max98090 0-0010: use default 2.8v micbias [ 3.145110] mmc0: new high speed MMC card at address 0001 [ 3.147658] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 3.147881] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 3.148073] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 3.148245] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 3.155883] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 3.183503] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 3.191317] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 3.199420] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 3.414609] NET: Registered protocol family 10 [ 3.554620] mip6: Mobile IPv6 [ 3.557580] sit: IPv6 over IPv4 tunneling driver [ 3.563245] NET: Registered protocol family 17 [ 3.567696] NET: Registered protocol family 15 [ 3.572126] can: controller area network core (rev 20120528 abi 9) [ 3.604649] NET: Registered protocol family 29 [ 3.609109] can: raw protocol (rev 20120528) [ 3.613387] can: broadcast manager protocol (rev 20120528 t) [ 3.613617] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3 [ 3.627404] can: netlink gateway (rev 20130117) max_hops=1 [ 3.654653] Bluetooth: RFCOMM socket layer initialized [ 3.659782] Bluetooth: RFCOMM ver 1.11 [ 3.663522] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.668854] Bluetooth: BNEP socket layer initialized [ 3.673804] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.679719] Bluetooth: HIDP socket layer initialized [ 3.684815] Key type dns_resolver registered [ 3.689535] Registering SWP/SWPB emulation handler [ 3.705397] +3.3V_RUN: supplied by +3.3V_SYS [ 3.710249] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 3.715988] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 3.720642] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 3.725394] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 3.730637] +VDD_LED: supplied by +VDD_MUX [ 3.735124] +5V_VDD_TS_SW: supplied by +5V_SYS [ 3.739795] +5V_USB_HS: supplied by +5V_SYS [ 3.744185] +5V_USB_SS: supplied by +5V_SYS [ 3.749298] +3.3V_PANEL: supplied by +3.3V_RUN [ 3.754383] +3.3V_LP0: supplied by +3.3V_SYS [ 3.759312] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.765217] +5V_HDMI_CON: supplied by +5V_SYS [ 3.770701] usb3-0 supply vbus not found, using dummy regulator [ 3.776719] usb3-1 supply vbus not found, using dummy regulator [ 3.785152] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.791305] panel supply power not found, using dummy regulator [ 3.855326] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 3.862735] tegra-xusb 70090000.usb: xHCI Host Controller [ 3.868155] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 3.877735] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 3.886372] tegra-xusb 70090000.usb: irq 342, io mem 0x70090000 [ 3.893107] hub 1-0:1.0: USB hub found [ 3.896925] hub 1-0:1.0: 6 ports detected [ 3.901625] tegra-xusb 70090000.usb: xHCI Host Controller [ 3.907071] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 3.914772] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.923685] hub 2-0:1.0: USB hub found [ 3.927499] hub 2-0:1.0: 2 ports detected [ 3.932694] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 3.938408] mmc1: Unknown controller version (3). You may experience problems. [ 3.945873] mmc1: Invalid maximum block size, assuming 512 bytes [ 3.952371] +1.8V_VDDIO: voltage operation not allowed [ 3.957536] mmc1: Switching to 3.3V signalling voltage failed [ 3.994886] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit [ 4.003199] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 4.010305] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 4.018353] mmc2: Unknown controller version (3). You may experience problems. [ 4.026043] mmc2: Invalid maximum block size, assuming 512 bytes [ 4.063340] mmc1: new high speed SDIO card at address 0001 [ 4.074745] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 4.179845] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.186468] [drm] No driver support for vblank timestamp query. [ 4.224618] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 4.226062] mmc2: new high speed SDHC card at address 0007 [ 4.226718] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 4.236593] GPT:Primary header alternate_lba != Alt. header my_lba [ 4.236596] GPT:3014591 != 15564799 [ 4.236598] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 4.236599] GPT:3014591 != 15564799 [ 4.236600] GPT: Use GNU Parted to correct GPT errors. [ 4.236628] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 4.248093] Console: switching to colour frame buffer device 170x48 [ 4.306372] drm drm: fb0: frame buffer device [ 4.334650] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.341154] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 4.348444] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 4.362788] +1.8V_RUN_CAM: disabling [ 4.366598] +1.2V_RUN_CAM_FRONT: disabling [ 4.370899] +1.05V_RUN_CAM_REAR: disabling [ 4.375229] +2.8V_RUN_TOUCH: disabling [ 4.379180] +2.8V_RUN_CAM_AF: disabling [ 4.383171] +1.8V_RUN_VPP_FUSE: disabling [ 4.387384] +5V_VDD_TS_SW: disabling [ 4.391147] ALSA device list: [ 4.394107] #0: tegra-hda at 0x70038000 irq 341 [ 4.398827] #1: GoogleNyanBig [ 4.402762] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 4.505139] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 4.520103] input: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 4.664958] EXT4-fs (mmcblk0p3): recovery complete [ 4.669745] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 4.677896] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 4.685060] devtmpfs: mounted [ 4.688469] Freeing unused kernel memory: 1024K (c0c00000 - c0d00000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 4.814707] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 5.807988] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 6.094698] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 6.253277] usb-storage 1-1:1.0: USB Mass Storage device detected [ 6.260186] scsi host0: usb-storage 1-1:1.0 [ 7.316329] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 7.488544] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 7.496958] sd 0:0:0:0: [sda] Write Protect is off [ 7.501738] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 7.507674] sd 0:0:0:0: [sda] No Caching mode page found [ 7.512975] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 7.537888] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 7.551414] sd 0:0:0:0: [sda] Attached SCSI removable disk mount -t sysfs none /sys root@(none):/# root@(none):/# mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:52 1970 [ 31.905595] PM: Syncing filesystems ... done. [ 31.915474] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 31.923627] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 31.932324] Suspending console(s) (use no_console_suspend to debug) [ 32.126070] PM: suspend of devices complete after 186.879 msecs [ 32.127667] PM: late suspend of devices complete after 1.588 msecs [ 32.128482] PM: noirq suspend of devices complete after 0.810 msecs [ 32.128483] Disabling non-boot CPUs ... [ 32.164950] CPU1: shutdown [ 32.245026] CPU2: shutdown [ 32.314973] CPU3: shutdown [ 32.345430] Entering suspend state LP1 [ 32.345444] Enabling non-boot CPUs ... [ 32.395766] CPU1 is up [ 32.445920] CPU2 is up [ 32.496167] CPU3 is up [ 32.496881] PM: noirq resume of devices complete after 0.709 msecs [ 32.498708] PM: early resume of devices complete after 1.312 msecs [ 32.529334] +1.8V_VDDIO: voltage operation not allowed [ 32.529336] mmc1: Switching to 3.3V signalling voltage failed [ 32.685011] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 32.831400] PM: resume of devices complete after 332.681 msecs [ 32.912883] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:57 1970 [ 33.993527] PM: Syncing filesystems ... done. [ 34.003029] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 34.011247] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 34.019973] Suspending console(s) (use no_console_suspend to debug) [ 34.195999] PM: suspend of devices complete after 169.162 msecs [ 34.196895] PM: late suspend of devices complete after 0.892 msecs [ 34.197721] PM: noirq suspend of devices complete after 0.823 msecs [ 34.197723] Disabling non-boot CPUs ... [ 34.234950] CPU1: shutdown [ 34.294763] IRQ17 no longer affine to CPU2 [ 34.294942] CPU2: shutdown [ 34.354912] CPU3: shutdown [ 34.385401] Entering suspend state LP1 [ 34.385427] Enabling non-boot CPUs ... [ 34.435740] CPU1 is up [ 34.485902] CPU2 is up [ 34.536144] CPU3 is up [ 34.536722] PM: noirq resume of devices complete after 0.573 msecs [ 34.538678] PM: early resume of devices complete after 1.465 msecs [ 34.569773] +1.8V_VDDIO: voltage operation not allowed [ 34.569776] mmc1: Switching to 3.3V signalling voltage failed [ 34.640814] PM: resume of devices complete after 102.127 msecs [ 34.719566] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:01 1970 [ 35.033980] PM: Syncing filesystems ... done. [ 35.043526] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 35.051773] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 35.060487] Suspending console(s) (use no_console_suspend to debug) [ 35.246017] PM: suspend of devices complete after 178.665 msecs [ 35.247241] PM: late suspend of devices complete after 1.214 msecs [ 35.248127] PM: noirq suspend of devices complete after 0.882 msecs [ 35.248129] Disabling non-boot CPUs ... [ 35.274928] CPU1: shutdown [ 35.344916] CPU2: shutdown [ 35.404877] CPU3: shutdown [ 35.435375] Entering suspend state LP1 [ 35.435401] Enabling non-boot CPUs ... [ 35.485711] CPU1 is up [ 35.535877] CPU2 is up [ 35.586120] CPU3 is up [ 35.586690] PM: noirq resume of devices complete after 0.566 msecs [ 35.588501] PM: early resume of devices complete after 1.320 msecs [ 35.619561] +1.8V_VDDIO: voltage operation not allowed [ 35.619564] mmc1: Switching to 3.3V signalling voltage failed [ 35.774959] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 35.921593] PM: resume of devices complete after 333.083 msecs [ 36.003049] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:06 1970 [ 37.084377] PM: Syncing filesystems ... done. [ 37.093770] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 37.101973] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 37.110686] Suspending console(s) (use no_console_suspend to debug) [ 37.295937] PM: suspend of devices complete after 178.392 msecs [ 37.296835] PM: late suspend of devices complete after 0.894 msecs [ 37.297660] PM: noirq suspend of devices complete after 0.822 msecs [ 37.297662] Disabling non-boot CPUs ... [ 37.324899] CPU1: shutdown [ 37.384885] CPU2: shutdown [ 37.444848] CPU3: shutdown [ 37.475353] Entering suspend state LP1 [ 37.475379] Enabling non-boot CPUs ... [ 37.525688] CPU1 is up [ 37.575858] CPU2 is up [ 37.626090] CPU3 is up [ 37.626638] PM: noirq resume of devices complete after 0.544 msecs [ 37.628387] PM: early resume of devices complete after 1.260 msecs [ 37.659831] +1.8V_VDDIO: voltage operation not allowed [ 37.659834] mmc1: Switching to 3.3V signalling voltage failed [ 37.726569] PM: resume of devices complete after 98.172 msecs [ 37.801240] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:10 1970 [ 38.123550] PM: Syncing filesystems ... done. [ 38.132928] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 38.141154] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 38.149884] Suspending console(s) (use no_console_suspend to debug) [ 38.335913] PM: suspend of devices complete after 179.167 msecs [ 38.336814] PM: late suspend of devices complete after 0.896 msecs [ 38.337640] PM: noirq suspend of devices complete after 0.823 msecs [ 38.337642] Disabling non-boot CPUs ... [ 38.364702] IRQ17 no longer affine to CPU1 [ 38.364879] CPU1: shutdown [ 38.434862] CPU2: shutdown [ 38.494830] CPU3: shutdown [ 38.525325] Entering suspend state LP1 [ 38.525352] Enabling non-boot CPUs ... [ 38.575660] CPU1 is up [ 38.625830] CPU2 is up [ 38.676072] CPU3 is up [ 38.676646] PM: noirq resume of devices complete after 0.569 msecs [ 38.678491] PM: early resume of devices complete after 1.330 msecs [ 38.709359] +1.8V_VDDIO: voltage operation not allowed [ 38.709364] mmc1: Switching to 3.3V signalling voltage failed [ 38.864894] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 39.010789] PM: resume of devices complete after 332.289 msecs [ 39.096579] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:15 1970 [ 40.183464] PM: Syncing filesystems ... done. [ 40.192604] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 40.200802] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 40.209526] Suspending console(s) (use no_console_suspend to debug) [ 40.395897] PM: suspend of devices complete after 179.498 msecs [ 40.396794] PM: late suspend of devices complete after 0.893 msecs [ 40.397621] PM: noirq suspend of devices complete after 0.824 msecs [ 40.397623] Disabling non-boot CPUs ... [ 40.424679] IRQ17 no longer affine to CPU1 [ 40.424854] CPU1: shutdown [ 40.484836] CPU2: shutdown [ 40.544803] CPU3: shutdown [ 40.575300] Entering suspend state LP1 [ 40.575327] Enabling non-boot CPUs ... [ 40.625640] CPU1 is up [ 40.675805] CPU2 is up [ 40.726044] CPU3 is up [ 40.726599] PM: noirq resume of devices complete after 0.549 msecs [ 40.728307] PM: early resume of devices complete after 1.207 msecs [ 40.759841] +1.8V_VDDIO: voltage operation not allowed [ 40.759848] mmc1: Switching to 3.3V signalling voltage failed [ 40.914885] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 41.061453] PM: resume of devices complete after 333.136 msecs [ 41.147025] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:20 1970 [ 42.234217] PM: Syncing filesystems ... done. [ 42.243673] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 42.251808] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 42.260447] Suspending console(s) (use no_console_suspend to debug) [ 42.445918] PM: suspend of devices complete after 178.603 msecs [ 42.447686] PM: late suspend of devices complete after 1.759 msecs [ 42.448499] PM: noirq suspend of devices complete after 0.808 msecs [ 42.448501] Disabling non-boot CPUs ... [ 42.474818] CPU1: shutdown [ 42.534810] CPU2: shutdown [ 42.594779] CPU3: shutdown [ 42.625274] Entering suspend state LP1 [ 42.625301] Enabling non-boot CPUs ... [ 42.675615] CPU1 is up [ 42.725776] CPU2 is up [ 42.776022] CPU3 is up [ 42.776551] PM: noirq resume of devices complete after 0.524 msecs [ 42.778328] PM: early resume of devices complete after 1.279 msecs [ 42.809848] +1.8V_VDDIO: voltage operation not allowed [ 42.809850] mmc1: Switching to 3.3V signalling voltage failed [ 42.878980] PM: resume of devices complete after 100.641 msecs [ 42.953622] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:24 1970 [ 43.293473] PM: Syncing filesystems ... done. [ 43.302938] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 43.311174] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 43.319895] Suspending console(s) (use no_console_suspend to debug) [ 43.515887] PM: suspend of devices complete after 189.134 msecs [ 43.517035] PM: late suspend of devices complete after 1.138 msecs [ 43.517820] PM: noirq suspend of devices complete after 0.780 msecs [ 43.517822] Disabling non-boot CPUs ... [ 43.544797] CPU1: shutdown [ 43.604787] CPU2: shutdown [ 43.664751] CPU3: shutdown [ 43.695251] Entering suspend state LP1 [ 43.695277] Enabling non-boot CPUs ... [ 43.745582] CPU1 is up [ 43.795753] CPU2 is up [ 43.845993] CPU3 is up [ 43.846529] PM: noirq resume of devices complete after 0.531 msecs [ 43.848199] PM: early resume of devices complete after 1.174 msecs [ 43.879704] +1.8V_VDDIO: voltage operation not allowed [ 43.879708] mmc1: Switching to 3.3V signalling voltage failed [ 44.034829] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 44.181384] PM: resume of devices complete after 333.176 msecs [ 44.262875] Restarting tasks ... done. root@(none):/# root@(none):/# [ 44.314458] random: nonblocking pool is initialized rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:29 1970 [ 45.353952] PM: Syncing filesystems ... done. [ 45.363332] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 45.371554] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 45.380283] Suspending console(s) (use no_console_suspend to debug) [ 45.565867] PM: suspend of devices complete after 178.722 msecs [ 45.567494] PM: late suspend of devices complete after 1.617 msecs [ 45.568305] PM: noirq suspend of devices complete after 0.806 msecs [ 45.568307] Disabling non-boot CPUs ... [ 45.604772] CPU1: shutdown [ 45.664760] CPU2: shutdown [ 45.724552] IRQ17 no longer affine to CPU3 [ 45.724730] CPU3: shutdown [ 45.755221] Entering suspend state LP1 [ 45.755247] Enabling non-boot CPUs ... [ 45.805562] CPU1 is up [ 45.855729] CPU2 is up [ 45.905968] CPU3 is up [ 45.906498] PM: noirq resume of devices complete after 0.525 msecs [ 45.908280] PM: early resume of devices complete after 1.284 msecs [ 45.939570] +1.8V_VDDIO: voltage operation not allowed [ 45.939574] mmc1: Switching to 3.3V signalling voltage failed [ 46.008978] PM: resume of devices complete after 100.687 msecs [ 46.087768] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:33 1970 [ 46.413443] PM: Syncing filesystems ... done. [ 46.422939] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 46.431085] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 46.439716] Suspending console(s) (use no_console_suspend to debug) [ 46.625836] PM: suspend of devices complete after 179.246 msecs [ 46.626947] PM: late suspend of devices complete after 1.101 msecs [ 46.627742] PM: noirq suspend of devices complete after 0.790 msecs [ 46.627744] Disabling non-boot CPUs ... [ 46.664743] CPU1: shutdown [ 46.724735] CPU2: shutdown [ 46.784701] CPU3: shutdown [ 46.815195] Entering suspend state LP1 [ 46.815222] Enabling non-boot CPUs ... [ 46.865536] CPU1 is up [ 46.915700] CPU2 is up [ 46.965947] CPU3 is up [ 46.966490] PM: noirq resume of devices complete after 0.538 msecs [ 46.968268] PM: early resume of devices complete after 1.267 msecs [ 46.999528] +1.8V_VDDIO: voltage operation not allowed [ 46.999532] mmc1: Switching to 3.3V signalling voltage failed [ 47.154775] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 47.301328] PM: resume of devices complete after 333.051 msecs [ 47.382808] Restarting tasks ... done. root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE