U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################### 2.8 MiB/s done Bytes transferred = 7239360 (6e76c0 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 2.8 MiB/s done Bytes transferred = 66901 (10555 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6e76c0 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013554 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.7.0-rc4-96064-g33688ab (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jun 19 22:04:28 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c141bb40, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 13 pages/cpu @eef89000 s23808 r8192 d21248 u53248 [ 0.000000] pcpu-alloc: s23808 r8192 d21248 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1996016K/2097148K available (9529K kernel code, 1142K rwdata, 4476K rodata, 2048K init, 343K bss, 35596K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc10ad50c (14998 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc141dba0 (1143 kB) [ 0.000000] .bss : 0xc141f000 - 0xc1474ca0 ( 344 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000013] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000019] Switching to timer-based delay loop, resolution 1000ns [ 0.001777] Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.001784] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001791] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001795] Switching to timer-based delay loop, resolution 83ns [ 0.001997] Console: colour dummy device 80x30 [ 0.002009] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000) [ 0.002014] pid_max: default: 32768 minimum: 301 [ 0.002053] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002058] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002302] CPU: Testing write buffer coherency: ok [ 0.002415] /cpus/cpu@0 missing clock-frequency property [ 0.002429] /cpus/cpu@1 missing clock-frequency property [ 0.002443] /cpus/cpu@2 missing clock-frequency property [ 0.002457] /cpus/cpu@3 missing clock-frequency property [ 0.002462] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002471] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.003739] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004337] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006955] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.011948] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.016673] Brought up 4 CPUs [ 0.016681] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.016684] CPU: All CPU(s) started in SVC mode. [ 0.017221] devtmpfs: initialized [ 0.023594] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.023864] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.024395] pinctrl core: initialized pinctrl subsystem [ 0.025071] NET: Registered protocol family 16 [ 0.025747] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.036707] cpuidle: using governor menu [ 0.043115] No ATAGs? [ 0.043126] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.043130] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.045238] Serial: AMBA PL011 UART driver [ 0.046206] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.063446] +5V_SYS: supplied by +VDD_MUX [ 0.063552] +3.3V_SYS: supplied by +VDD_MUX [ 0.063773] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.063778] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.063809] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.063813] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.063843] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.063848] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.063878] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.063882] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.063961] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.063966] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.063994] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.063998] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.065125] vgaarb: loaded [ 0.065412] SCSI subsystem initialized [ 0.065485] libata version 3.00 loaded. [ 0.065587] usbcore: registered new interface driver usbfs [ 0.065609] usbcore: registered new interface driver hub [ 0.065635] usbcore: registered new device driver usb [ 0.067039] pps_core: LinuxPPS API ver. 1 registered [ 0.067043] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.067051] PTP clock support registered [ 0.067123] EDAC MC: Ver: 3.0.0 [ 0.067557] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.067566] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.068053] clocksource: Switched to clocksource arch_sys_counter [ 0.071726] NET: Registered protocol family 2 [ 0.071937] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.071970] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.072033] TCP: Hash tables configured (established 8192 bind 8192) [ 0.072056] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.072069] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.072130] NET: Registered protocol family 1 [ 0.072233] RPC: Registered named UNIX socket transport module. [ 0.072236] RPC: Registered udp transport module. [ 0.072239] RPC: Registered tcp transport module. [ 0.072241] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.072246] PCI: CLS 0 bytes, default 64 [ 0.072687] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.073243] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.073528] workingset: timestamp_bits=28 max_order=19 bucket_order=0 [ 0.077324] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.077630] NFS: Registering the id_resolver key type [ 0.077646] Key type id_resolver registered [ 0.077649] Key type id_legacy registered [ 0.077666] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.078158] bounce: pool size: 64 pages [ 0.078232] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.078237] io scheduler noop registered [ 0.078240] io scheduler deadline registered [ 0.078251] io scheduler cfq registered (default) [ 0.080166] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.089116] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.089809] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.110736] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.111885] console [ttyS0] disabled [ 0.111901] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 0.964874] console [ttyS0] enabled [ 0.968669] SuperH (H)SCI(F) driver initialized [ 0.973553] msm_serial: driver initialized [ 0.977703] STMicroelectronics ASC driver initialized [ 0.984182] [drm] Initialized drm 1.1.0 20060810 [ 0.990217] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 0.996770] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.003989] panel supply power not found, using dummy regulator [ 1.013729] brd: module loaded [ 1.018862] loop: module loaded [ 1.022904] as3722 4-0040: AS3722 with revision 0x1 found [ 1.032627] as3722-sd2: supplied by +5V_SYS [ 1.037076] as3722-sd3: supplied by +5V_SYS [ 1.041413] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.047604] as3722-sd4: supplied by +5V_SYS [ 1.051940] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.057686] as3722-sd5: supplied by +5V_SYS [ 1.063284] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.069020] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.075049] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.080669] as3722-ldo3: supplied by +3.3V_SYS [ 1.085119] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.092696] as3722-ldo4: supplied by +3.3V_SYS [ 1.097293] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.103319] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.108080] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.114775] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.120809] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.125579] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.132141] as3722-ldo9: supplied by +5V_SYS [ 1.136706] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.142915] as3722-ldo10: supplied by +5V_SYS [ 1.147423] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.153872] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.172160] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.178443] libphy: Fixed MDIO Bus: probed [ 1.182770] CAN device driver interface [ 1.187322] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.194272] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.201001] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.208411] usbcore: registered new interface driver pegasus [ 1.214081] usbcore: registered new interface driver asix [ 1.219485] usbcore: registered new interface driver ax88179_178a [ 1.225582] usbcore: registered new interface driver cdc_ether [ 1.231425] usbcore: registered new interface driver smsc75xx [ 1.237181] usbcore: registered new interface driver smsc95xx [ 1.242931] usbcore: registered new interface driver net1080 [ 1.248596] usbcore: registered new interface driver cdc_subset [ 1.254521] usbcore: registered new interface driver zaurus [ 1.260110] usbcore: registered new interface driver cdc_ncm [ 1.266483] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.272999] ehci-pci: EHCI PCI platform driver [ 1.277449] ehci-platform: EHCI generic platform driver [ 1.282739] ehci-omap: OMAP-EHCI Host Controller driver [ 1.288005] ehci-orion: EHCI orion driver [ 1.292057] SPEAr-ehci: EHCI SPEAr driver [ 1.296113] ehci-st: EHCI STMicroelectronics driver [ 1.301033] ehci-exynos: EHCI EXYNOS driver [ 1.305269] ehci-atmel: EHCI Atmel driver [ 1.309323] tegra-ehci: Tegra EHCI driver [ 1.313391] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.319565] ohci-pci: OHCI PCI platform driver [ 1.324016] ohci-platform: OHCI generic platform driver [ 1.329290] ohci-omap3: OHCI OMAP3 driver [ 1.333342] SPEAr-ohci: OHCI SPEAr driver [ 1.337390] ohci-st: OHCI STMicroelectronics driver [ 1.342310] ohci-atmel: OHCI Atmel driver [ 1.346585] usbcore: registered new interface driver usb-storage [ 1.353184] mousedev: PS/2 mouse device common for all mice [ 1.359159] 1-0015 supply vcc not found, using dummy regulator [ 1.360992] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.360995] as3722-rtc as3722-rtc: RTC interrupt 370 [ 1.363290] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.363314] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.363599] i2c /dev entries driver [ 1.366967] 0-004c supply vcc not found, using dummy regulator [ 1.402121] sdhci: Secure Digital Host Controller Interface driver [ 1.408294] sdhci: Copyright(c) Pierre Ossman [ 1.413210] Synopsys Designware Multimedia Card Interface Driver [ 1.419608] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.425555] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.431221] mmc0: Unknown controller version (3). You may experience problems. [ 1.438579] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.443455] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.448344] mmc0: Unknown controller version (3). You may experience problems. [ 1.455666] mmc0: Unknown controller version (3). You may experience problems. [ 1.462905] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.503065] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 1.511665] ledtrig-cpu: registered to indicate activity on CPUs [ 1.517794] usbcore: registered new interface driver usbhid [ 1.523365] usbhid: USB HID core driver [ 1.529293] NET: Registered protocol family 10 [ 1.534032] sit: IPv6 over IPv4 tunneling driver [ 1.538977] NET: Registered protocol family 17 [ 1.543427] can: controller area network core (rev 20120528 abi 9) [ 1.549629] NET: Registered protocol family 29 [ 1.554073] can: raw protocol (rev 20120528) [ 1.558342] can: broadcast manager protocol (rev 20120528 t) [ 1.563998] can: netlink gateway (rev 20130117) max_hops=1 [ 1.569634] Key type dns_resolver registered [ 1.574144] ThumbEE CPU extension supported. [ 1.578419] Registering SWP/SWPB emulation handler [ 1.585180] +3.3V_RUN: supplied by +3.3V_SYS [ 1.590222] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.595961] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.597855] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 1.608785] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.613526] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.618860] +VDD_LED: supplied by +VDD_MUX [ 1.623245] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.627991] +5V_USB_HS: supplied by +5V_SYS [ 1.632524] +5V_USB_SS: supplied by +5V_SYS [ 1.634796] mmc0: new high speed MMC card at address 0001 [ 1.635506] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.636116] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.636565] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.636964] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 1.640881] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.671017] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.676236] +3.3V_LP0: supplied by +3.3V_SYS [ 1.681211] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.681475] elan_i2c 1-0015: failed to read report data: -121 [ 1.692986] +5V_HDMI_CON: supplied by +5V_SYS [ 1.698384] usb3-0 supply vbus not found, using dummy regulator [ 1.704413] usb3-1 supply vbus not found, using dummy regulator [ 1.713731] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.720481] panel supply power not found, using dummy regulator [ 1.727435] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.733143] mmc1: Unknown controller version (3). You may experience problems. [ 1.740596] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.746923] +1.8V_VDDIO: voltage operation not allowed [ 1.752091] mmc1: Switching to 3.3V signalling voltage failed [ 1.783143] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit [ 1.791886] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.796784] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.801698] mmc2: Unknown controller version (3). You may experience problems. [ 1.809111] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.821394] elan_i2c 1-0015: invalid report id data (ff) [ 1.848612] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 1.875059] mmc1: new high speed SDIO card at address 0001 [ 1.951597] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.958219] [drm] No driver support for vblank timestamp query. [ 2.005518] mmc2: new high speed SDHC card at address 0007 [ 2.006089] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.014544] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.014547] GPT:3014591 != 15564799 [ 2.014549] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.014550] GPT:3014591 != 15564799 [ 2.014551] GPT: Use GNU Parted to correct GPT errors. [ 2.014575] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.019560] Console: switching to colour frame buffer device 170x48 [ 2.070963] drm drm: fb0: frame buffer device [ 2.088140] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.095055] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.102518] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822) [ 2.115137] +1.8V_RUN_CAM: disabling [ 2.118936] +3.3V_RUN_CAM: disabling [ 2.122711] +1.2V_RUN_CAM_FRONT: disabling [ 2.126986] +1.05V_RUN_CAM_REAR: disabling [ 2.131286] +2.8V_RUN_TOUCH: disabling [ 2.135208] +2.8V_RUN_CAM_AF: disabling [ 2.139220] +1.8V_RUN_VPP_FUSE: disabling [ 2.143439] +5V_VDD_TS_SW: disabling [ 2.147012] +5V_USB_HS: disabling [ 2.150343] +5V_USB_SS: disabling [ 2.154669] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.163306] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.395953] EXT4-fs (mmcblk0p3): recovery complete [ 2.401501] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.409630] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.416279] devtmpfs: mounted [ 2.419964] Freeing unused kernel memory: 2048K (c1100000 - c1300000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# mount -t sysfs none /sys root@(none):/# root@(none):/# mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:27 1970 [ 5.773436] PM: Syncing filesystems ... done. [ 5.782859] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.791008] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.799675] Suspending console(s) (use no_console_suspend to debug) [ 5.844638] PM: suspend of devices complete after 38.160 msecs [ 5.845457] PM: late suspend of devices complete after 0.814 msecs [ 5.846122] PM: noirq suspend of devices complete after 0.662 msecs [ 5.846123] Disabling non-boot CPUs ... [ 5.846552] CPU1: shutdown [ 5.859128] CPU2: shutdown [ 5.873968] CPU3: shutdown [ 5.888501] Entering suspend state LP1 [ 5.888515] Enabling non-boot CPUs ... [ 5.913735] CPU1 is up [ 5.938748] CPU2 is up [ 5.963854] CPU3 is up [ 5.964356] PM: noirq resume of devices complete after 0.496 msecs [ 5.965925] PM: early resume of devices complete after 1.263 msecs [ 6.109981] +1.8V_VDDIO: voltage operation not allowed [ 6.109985] mmc1: Switching to 3.3V signalling voltage failed [ 6.170771] PM: resume of devices complete after 204.835 msecs [ 6.245326] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:31 1970 [ 6.797792] PM: Syncing filesystems ... done. [ 6.807365] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 6.815571] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6.824204] Suspending console(s) (use no_console_suspend to debug) [ 6.884615] PM: suspend of devices complete after 53.586 msecs [ 6.885728] PM: late suspend of devices complete after 1.104 msecs [ 6.886467] PM: noirq suspend of devices complete after 0.733 msecs [ 6.886469] Disabling non-boot CPUs ... [ 6.886840] CPU1: shutdown [ 6.899047] CPU2: shutdown [ 6.923940] CPU3: shutdown [ 6.938476] Entering suspend state LP1 [ 6.938490] Enabling non-boot CPUs ... [ 6.963709] CPU1 is up [ 6.988729] CPU2 is up [ 7.013822] CPU3 is up [ 7.014307] PM: noirq resume of devices complete after 0.480 msecs [ 7.015626] PM: early resume of devices complete after 1.016 msecs [ 7.159960] +1.8V_VDDIO: voltage operation not allowed [ 7.159965] mmc1: Switching to 3.3V signalling voltage failed [ 7.221357] PM: resume of devices complete after 205.721 msecs [ 7.295908] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:35 1970 [ 7.847613] PM: Syncing filesystems ... done. [ 7.856909] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.865111] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.873742] Suspending console(s) (use no_console_suspend to debug) [ 7.929560] PM: suspend of devices complete after 48.993 msecs [ 7.930377] PM: late suspend of devices complete after 0.813 msecs [ 7.931039] PM: noirq suspend of devices complete after 0.659 msecs [ 7.931041] Disabling non-boot CPUs ... [ 7.931417] CPU1: shutdown [ 7.944025] CPU2: shutdown [ 7.968732] IRQ17 no longer affine to CPU3 [ 7.968916] CPU3: shutdown [ 7.983449] Entering suspend state LP1 [ 7.983463] Enabling non-boot CPUs ... [ 8.008682] CPU1 is up [ 8.033708] CPU2 is up [ 8.058815] CPU3 is up [ 8.059323] PM: noirq resume of devices complete after 0.504 msecs [ 8.060687] PM: early resume of devices complete after 1.049 msecs [ 8.205051] +1.8V_VDDIO: voltage operation not allowed [ 8.205054] mmc1: Switching to 3.3V signalling voltage failed [ 8.267044] PM: resume of devices complete after 206.345 msecs [ 8.345728] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:39 1970 [ 8.892807] PM: Syncing filesystems ... done. [ 8.902389] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8.910596] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8.919210] Suspending console(s) (use no_console_suspend to debug) [ 8.984595] PM: suspend of devices complete after 58.561 msecs [ 8.985846] PM: late suspend of devices complete after 1.241 msecs [ 8.986600] PM: noirq suspend of devices complete after 0.749 msecs [ 8.986602] Disabling non-boot CPUs ... [ 8.986972] CPU1: shutdown [ 9.008836] IRQ17 no longer affine to CPU2 [ 9.009024] CPU2: shutdown [ 9.033867] CPU3: shutdown [ 9.048437] Entering suspend state LP1 [ 9.048451] Enabling non-boot CPUs ... [ 9.073664] CPU1 is up [ 9.098682] CPU2 is up [ 9.123784] CPU3 is up [ 9.124267] PM: noirq resume of devices complete after 0.478 msecs [ 9.125438] PM: early resume of devices complete after 0.875 msecs [ 9.269933] +1.8V_VDDIO: voltage operation not allowed [ 9.269937] mmc1: Switching to 3.3V signalling voltage failed [ 9.332549] PM: resume of devices complete after 207.098 msecs [ 9.411246] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 9.957581] PM: Syncing filesystems ... done. [ 9.966881] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.975096] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.983783] Suspending console(s) (use no_console_suspend to debug) [ 10.044659] PM: suspend of devices complete after 54.051 msecs [ 10.045704] PM: late suspend of devices complete after 1.037 msecs [ 10.046588] PM: noirq suspend of devices complete after 0.876 msecs [ 10.046590] Disabling non-boot CPUs ... [ 10.046796] IRQ17 no longer affine to CPU1 [ 10.046975] CPU1: shutdown [ 10.063983] CPU2: shutdown [ 10.088875] CPU3: shutdown [ 10.103405] Entering suspend state LP1 [ 10.103418] Enabling non-boot CPUs ... [ 10.128641] CPU1 is up [ 10.153661] CPU2 is up [ 10.178761] CPU3 is up [ 10.179239] PM: noirq resume of devices complete after 0.474 msecs [ 10.180588] PM: early resume of devices complete after 1.048 msecs [ 10.324992] +1.8V_VDDIO: voltage operation not allowed [ 10.324995] mmc1: Switching to 3.3V signalling voltage failed [ 10.388048] PM: resume of devices complete after 207.448 msecs [ 10.466680] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:47 1970 [ 11.012689] PM: Syncing filesystems ... done. [ 11.022111] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 11.030317] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 11.038944] Suspending console(s) (use no_console_suspend to debug) [ 11.099632] PM: suspend of devices complete after 53.862 msecs [ 11.100682] PM: late suspend of devices complete after 1.041 msecs [ 11.101566] PM: noirq suspend of devices complete after 0.877 msecs [ 11.101568] Disabling non-boot CPUs ... [ 11.101954] CPU1: shutdown [ 11.123960] CPU2: shutdown [ 11.148869] CPU3: shutdown [ 11.163380] Entering suspend state LP1 [ 11.163393] Enabling non-boot CPUs ... [ 11.188616] CPU1 is up [ 11.213636] CPU2 is up [ 11.238736] CPU3 is up [ 11.239222] PM: noirq resume of devices complete after 0.481 msecs [ 11.240590] PM: early resume of devices complete after 1.052 msecs [ 11.385800] +1.8V_VDDIO: voltage operation not allowed [ 11.385804] mmc1: Switching to 3.3V signalling voltage failed [ 11.447703] PM: resume of devices complete after 207.103 msecs [ 11.522454] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:51 1970 [ 12.072739] PM: Syncing filesystems ... done. [ 12.082317] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.090527] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.099144] Suspending console(s) (use no_console_suspend to debug) [ 12.159493] PM: suspend of devices complete after 53.529 msecs [ 12.160706] PM: late suspend of devices complete after 1.204 msecs [ 12.161459] PM: noirq suspend of devices complete after 0.747 msecs [ 12.161460] Disabling non-boot CPUs ... [ 12.161841] CPU1: shutdown [ 12.188757] IRQ17 no longer affine to CPU2 [ 12.188945] CPU2: shutdown [ 12.213799] CPU3: shutdown [ 12.228370] Entering suspend state LP1 [ 12.228384] Enabling non-boot CPUs ... [ 12.253597] CPU1 is up [ 12.278616] CPU2 is up [ 12.303719] CPU3 is up [ 12.304192] PM: noirq resume of devices complete after 0.468 msecs [ 12.305483] PM: early resume of devices complete after 0.980 msecs [ 12.449974] +1.8V_VDDIO: voltage operation not allowed [ 12.449976] mmc1: Switching to 3.3V signalling voltage failed [ 12.512015] PM: resume of devices complete after 206.519 msecs [ 12.590726] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:55 1970 [ 13.137724] PM: Syncing filesystems ... done. [ 13.147156] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 13.155364] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 13.163975] Suspending console(s) (use no_console_suspend to debug) [ 13.224475] PM: suspend of devices complete after 53.674 msecs [ 13.225680] PM: late suspend of devices complete after 1.196 msecs [ 13.226334] PM: noirq suspend of devices complete after 0.650 msecs [ 13.226336] Disabling non-boot CPUs ... [ 13.226533] IRQ17 no longer affine to CPU1 [ 13.226713] CPU1: shutdown [ 13.253927] CPU2: shutdown [ 13.278780] CPU3: shutdown [ 13.293349] Entering suspend state LP1 [ 13.293363] Enabling non-boot CPUs ... [ 13.318571] CPU1 is up [ 13.343599] CPU2 is up [ 13.368699] CPU3 is up [ 13.369168] PM: noirq resume of devices complete after 0.464 msecs [ 13.370046] PM: early resume of devices complete after 0.575 msecs [ 13.515085] +1.8V_VDDIO: voltage operation not allowed [ 13.515088] mmc1: Switching to 3.3V signalling voltage failed [ 13.577126] PM: resume of devices complete after 207.070 msecs [ 13.655767] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:59 1970 [ 14.207674] PM: Syncing filesystems ... done. [ 14.217130] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.225243] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.233880] Suspending console(s) (use no_console_suspend to debug) [ 14.289569] PM: suspend of devices complete after 48.879 msecs [ 14.290607] PM: late suspend of devices complete after 1.029 msecs [ 14.291483] PM: noirq suspend of devices complete after 0.869 msecs [ 14.291486] Disabling non-boot CPUs ... [ 14.291692] IRQ17 no longer affine to CPU1 [ 14.291873] CPU1: shutdown [ 14.313903] CPU2: shutdown [ 14.338786] CPU3: shutdown [ 14.353317] Entering suspend state LP1 [ 14.353330] Enabling non-boot CPUs ... [ 14.378551] CPU1 is up [ 14.403576] CPU2 is up [ 14.428677] CPU3 is up [ 14.429160] PM: noirq resume of devices complete after 0.478 msecs [ 14.430500] PM: early resume of devices complete after 1.025 msecs [ 14.575425] +1.8V_VDDIO: voltage operation not allowed [ 14.575428] mmc1: Switching to 3.3V signalling voltage failed [ 14.637163] PM: resume of devices complete after 206.653 msecs [ 14.715855] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 15.266923] PM: Syncing filesystems ... done. [ 15.276420] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 15.284533] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 15.293169] Suspending console(s) (use no_console_suspend to debug) [ 15.349331] PM: suspend of devices complete after 49.354 msecs [ 15.350586] PM: late suspend of devices complete after 1.246 msecs [ 15.351341] PM: noirq suspend of devices complete after 0.750 msecs [ 15.351343] Disabling non-boot CPUs ... [ 15.351536] IRQ17 no longer affine to CPU1 [ 15.351714] CPU1: shutdown [ 15.363876] CPU2: shutdown [ 15.388765] CPU3: shutdown [ 15.403296] Entering suspend state LP1 [ 15.403310] Enabling non-boot CPUs ... [ 15.428529] CPU1 is up [ 15.453552] CPU2 is up [ 15.478652] CPU3 is up [ 15.479131] PM: noirq resume of devices complete after 0.474 msecs [ 15.480306] PM: early resume of devices complete after 0.877 msecs [ 15.625667] +1.8V_VDDIO: voltage operation not allowed [ 15.625670] mmc1: Switching to 3.3V signalling voltage failed [ 15.688142] PM: resume of devices complete after 207.826 msecs [ 15.767492] Restarting tasks ... done. root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE