U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################### 3.1 MiB/s done Bytes transferred = 7239024 (6e7570 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.5 MiB/s done Bytes transferred = 66901 (10555 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6e7570 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013554 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.7.0-rc3-95766-g5edb564 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jun 12 07:34:14 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c141bb40, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 13 pages/cpu @eef89000 s23808 r8192 d21248 u53248 [ 0.000000] pcpu-alloc: s23808 r8192 d21248 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1996016K/2097148K available (9529K kernel code, 1142K rwdata, 4476K rodata, 2048K init, 343K bss, 35596K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc10ad5bc (14998 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc141dba0 (1143 kB) [ 0.000000] .bss : 0xc141f000 - 0xc1474ca0 ( 344 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000012] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000018] Switching to timer-based delay loop, resolution 1000ns [ 0.001805] Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.001812] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001818] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001822] Switching to timer-based delay loop, resolution 83ns [ 0.002023] Console: colour dummy device 80x30 [ 0.002035] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000) [ 0.002041] pid_max: default: 32768 minimum: 301 [ 0.002079] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002084] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002326] CPU: Testing write buffer coherency: ok [ 0.002438] /cpus/cpu@0 missing clock-frequency property [ 0.002452] /cpus/cpu@1 missing clock-frequency property [ 0.002466] /cpus/cpu@2 missing clock-frequency property [ 0.002480] /cpus/cpu@3 missing clock-frequency property [ 0.002484] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002494] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.003769] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004371] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006978] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.011973] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.016699] Brought up 4 CPUs [ 0.016706] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.016709] CPU: All CPU(s) started in SVC mode. [ 0.017245] devtmpfs: initialized [ 0.023612] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.023881] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.024406] pinctrl core: initialized pinctrl subsystem [ 0.025072] NET: Registered protocol family 16 [ 0.025748] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.036731] cpuidle: using governor menu [ 0.043113] No ATAGs? [ 0.043125] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.043129] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.045223] Serial: AMBA PL011 UART driver [ 0.046206] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.063476] +5V_SYS: supplied by +VDD_MUX [ 0.063583] +3.3V_SYS: supplied by +VDD_MUX [ 0.063801] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.063807] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.063838] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.063842] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.063872] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.063876] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.063905] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.063909] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.063988] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.063993] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.064021] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.064025] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.065147] vgaarb: loaded [ 0.065434] SCSI subsystem initialized [ 0.065500] libata version 3.00 loaded. [ 0.065601] usbcore: registered new interface driver usbfs [ 0.065623] usbcore: registered new interface driver hub [ 0.065648] usbcore: registered new device driver usb [ 0.067037] pps_core: LinuxPPS API ver. 1 registered [ 0.067040] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.067049] PTP clock support registered [ 0.067119] EDAC MC: Ver: 3.0.0 [ 0.067548] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.067557] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.068034] clocksource: Switched to clocksource arch_sys_counter [ 0.071677] NET: Registered protocol family 2 [ 0.071892] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.071925] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.071988] TCP: Hash tables configured (established 8192 bind 8192) [ 0.072014] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.072028] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.072088] NET: Registered protocol family 1 [ 0.072192] RPC: Registered named UNIX socket transport module. [ 0.072195] RPC: Registered udp transport module. [ 0.072198] RPC: Registered tcp transport module. [ 0.072200] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.072204] PCI: CLS 0 bytes, default 64 [ 0.072641] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.073202] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.073484] workingset: timestamp_bits=28 max_order=19 bucket_order=0 [ 0.077332] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.077636] NFS: Registering the id_resolver key type [ 0.077650] Key type id_resolver registered [ 0.077653] Key type id_legacy registered [ 0.077670] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.078157] bounce: pool size: 64 pages [ 0.078230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.078234] io scheduler noop registered [ 0.078237] io scheduler deadline registered [ 0.078249] io scheduler cfq registered (default) [ 0.080152] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.089062] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.089755] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.111090] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.112244] console [ttyS0] disabled [ 0.112260] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 0.965244] console [ttyS0] enabled [ 0.969038] SuperH (H)SCI(F) driver initialized [ 0.973918] msm_serial: driver initialized [ 0.978074] STMicroelectronics ASC driver initialized [ 0.984540] [drm] Initialized drm 1.1.0 20060810 [ 0.990566] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 0.997117] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.004333] panel supply power not found, using dummy regulator [ 1.014039] brd: module loaded [ 1.019180] loop: module loaded [ 1.023213] as3722 4-0040: AS3722 with revision 0x1 found [ 1.032932] as3722-sd2: supplied by +5V_SYS [ 1.037361] as3722-sd3: supplied by +5V_SYS [ 1.041698] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.047879] as3722-sd4: supplied by +5V_SYS [ 1.052213] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.057958] as3722-sd5: supplied by +5V_SYS [ 1.063553] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.069288] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.075317] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.080934] as3722-ldo3: supplied by +3.3V_SYS [ 1.085385] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.092964] as3722-ldo4: supplied by +3.3V_SYS [ 1.097560] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.103586] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.108354] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.115047] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.121082] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.125851] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.132414] as3722-ldo9: supplied by +5V_SYS [ 1.136978] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.143189] as3722-ldo10: supplied by +5V_SYS [ 1.147689] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.154136] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.172396] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.178671] libphy: Fixed MDIO Bus: probed [ 1.182993] CAN device driver interface [ 1.187535] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.194485] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.201208] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.208616] usbcore: registered new interface driver pegasus [ 1.214286] usbcore: registered new interface driver asix [ 1.219690] usbcore: registered new interface driver ax88179_178a [ 1.225786] usbcore: registered new interface driver cdc_ether [ 1.231629] usbcore: registered new interface driver smsc75xx [ 1.237386] usbcore: registered new interface driver smsc95xx [ 1.243135] usbcore: registered new interface driver net1080 [ 1.248802] usbcore: registered new interface driver cdc_subset [ 1.254724] usbcore: registered new interface driver zaurus [ 1.260313] usbcore: registered new interface driver cdc_ncm [ 1.266685] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.273201] ehci-pci: EHCI PCI platform driver [ 1.277647] ehci-platform: EHCI generic platform driver [ 1.282938] ehci-omap: OMAP-EHCI Host Controller driver [ 1.288208] ehci-orion: EHCI orion driver [ 1.292254] SPEAr-ehci: EHCI SPEAr driver [ 1.296310] ehci-st: EHCI STMicroelectronics driver [ 1.301232] ehci-exynos: EHCI EXYNOS driver [ 1.305466] ehci-atmel: EHCI Atmel driver [ 1.309519] tegra-ehci: Tegra EHCI driver [ 1.313586] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.319759] ohci-pci: OHCI PCI platform driver [ 1.324209] ohci-platform: OHCI generic platform driver [ 1.329485] ohci-omap3: OHCI OMAP3 driver [ 1.333538] SPEAr-ohci: OHCI SPEAr driver [ 1.337586] ohci-st: OHCI STMicroelectronics driver [ 1.342506] ohci-atmel: OHCI Atmel driver [ 1.346780] usbcore: registered new interface driver usb-storage [ 1.353372] mousedev: PS/2 mouse device common for all mice [ 1.359659] 1-0015 supply vcc not found, using dummy regulator [ 1.366862] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.373726] as3722-rtc as3722-rtc: RTC interrupt 370 [ 1.380640] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.387780] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.394146] i2c /dev entries driver [ 1.400029] 0-004c supply vcc not found, using dummy regulator [ 1.409928] sdhci: Secure Digital Host Controller Interface driver [ 1.416106] sdhci: Copyright(c) Pierre Ossman [ 1.421023] Synopsys Designware Multimedia Card Interface Driver [ 1.427420] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.433366] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.439032] mmc0: Unknown controller version (3). You may experience problems. [ 1.446404] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.451284] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.456177] mmc0: Unknown controller version (3). You may experience problems. [ 1.463500] mmc0: Unknown controller version (3). You may experience problems. [ 1.470756] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.508043] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 1.516621] ledtrig-cpu: registered to indicate activity on CPUs [ 1.522734] usbcore: registered new interface driver usbhid [ 1.528299] usbhid: USB HID core driver [ 1.534255] NET: Registered protocol family 10 [ 1.539001] sit: IPv6 over IPv4 tunneling driver [ 1.543959] NET: Registered protocol family 17 [ 1.548408] can: controller area network core (rev 20120528 abi 9) [ 1.554618] NET: Registered protocol family 29 [ 1.559062] can: raw protocol (rev 20120528) [ 1.563332] can: broadcast manager protocol (rev 20120528 t) [ 1.568988] can: netlink gateway (rev 20130117) max_hops=1 [ 1.574632] Key type dns_resolver registered [ 1.579158] ThumbEE CPU extension supported. [ 1.583431] Registering SWP/SWPB emulation handler [ 1.590134] +3.3V_RUN: supplied by +3.3V_SYS [ 1.595086] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.597541] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 1.608874] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.613589] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.618229] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.623558] +VDD_LED: supplied by +VDD_MUX [ 1.627838] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.632630] +5V_USB_HS: supplied by +5V_SYS [ 1.637289] +5V_USB_SS: supplied by +5V_SYS [ 1.639790] mmc0: new high speed MMC card at address 0001 [ 1.640547] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.641152] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.641525] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.641974] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 1.647485] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.675686] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.680898] +3.3V_LP0: supplied by +3.3V_SYS [ 1.685808] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.686058] elan_i2c 1-0015: failed to read report data: -121 [ 1.697581] +5V_HDMI_CON: supplied by +5V_SYS [ 1.702822] usb3-0 supply vbus not found, using dummy regulator [ 1.708859] usb3-1 supply vbus not found, using dummy regulator [ 1.718241] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.724989] panel supply power not found, using dummy regulator [ 1.731580] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.737256] mmc1: Unknown controller version (3). You may experience problems. [ 1.744730] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.751158] +1.8V_VDDIO: voltage operation not allowed [ 1.756328] mmc1: Switching to 3.3V signalling voltage failed [ 1.788125] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit [ 1.796873] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.801771] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.806681] mmc2: Unknown controller version (3). You may experience problems. [ 1.814093] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.825858] elan_i2c 1-0015: invalid report id data (ff) [ 1.853311] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 1.885072] mmc1: new high speed SDIO card at address 0001 [ 1.953561] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.960195] [drm] No driver support for vblank timestamp query. [ 2.010589] mmc2: new high speed SDHC card at address 0007 [ 2.011215] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.019795] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.019802] GPT:3014591 != 15564799 [ 2.019804] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.019805] GPT:3014591 != 15564799 [ 2.019807] GPT: Use GNU Parted to correct GPT errors. [ 2.019836] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.022052] Console: switching to colour frame buffer device 170x48 [ 2.073490] drm drm: fb0: frame buffer device [ 2.088129] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.094822] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.101981] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822) [ 2.114663] +1.8V_RUN_CAM: disabling [ 2.118421] +3.3V_RUN_CAM: disabling [ 2.122150] +1.2V_RUN_CAM_FRONT: disabling [ 2.126419] +1.05V_RUN_CAM_REAR: disabling [ 2.130711] +2.8V_RUN_TOUCH: disabling [ 2.134633] +2.8V_RUN_CAM_AF: disabling [ 2.138643] +1.8V_RUN_VPP_FUSE: disabling [ 2.142806] +5V_VDD_TS_SW: disabling [ 2.146400] +5V_USB_HS: disabling [ 2.149715] +5V_USB_SS: disabling [ 2.154031] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.162646] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.276494] EXT4-fs (mmcblk0p3): recovery complete [ 2.281313] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.289416] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.296566] devtmpfs: mounted [ 2.300235] Freeing unused kernel memory: 2048K (c1100000 - c1300000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# mount -t sysfs none /sys root@(none):/# root@(none):/# mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:26 1970 [ 4.772408] PM: Syncing filesystems ... done. [ 4.781997] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 4.790160] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 4.798796] Suspending console(s) (use no_console_suspend to debug) [ 4.849597] PM: suspend of devices complete after 43.997 msecs [ 4.850418] PM: late suspend of devices complete after 0.817 msecs [ 4.851081] PM: noirq suspend of devices complete after 0.660 msecs [ 4.851083] Disabling non-boot CPUs ... [ 4.851499] CPU1: shutdown [ 4.874046] CPU2: shutdown [ 4.898974] CPU3: shutdown [ 4.913471] Entering suspend state LP1 [ 4.913484] Enabling non-boot CPUs ... [ 4.938701] CPU1 is up [ 4.963732] CPU2 is up [ 4.988829] CPU3 is up [ 4.989460] PM: noirq resume of devices complete after 0.626 msecs [ 4.990807] PM: early resume of devices complete after 1.050 msecs [ 5.134898] +1.8V_VDDIO: voltage operation not allowed [ 5.134903] mmc1: Switching to 3.3V signalling voltage failed [ 5.197827] PM: resume of devices complete after 207.010 msecs [ 5.272406] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:30 1970 [ 5.772836] PM: Syncing filesystems ... done. [ 5.782411] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.790620] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.799255] Suspending console(s) (use no_console_suspend to debug) [ 5.859620] PM: suspend of devices complete after 53.540 msecs [ 5.860843] PM: late suspend of devices complete after 1.214 msecs [ 5.861597] PM: noirq suspend of devices complete after 0.749 msecs [ 5.861598] Disabling non-boot CPUs ... [ 5.861975] CPU1: shutdown [ 5.874018] CPU2: shutdown [ 5.898753] IRQ17 no longer affine to CPU3 [ 5.898937] CPU3: shutdown [ 5.913462] Entering suspend state LP1 [ 5.913476] Enabling non-boot CPUs ... [ 5.938689] CPU1 is up [ 5.963719] CPU2 is up [ 5.988820] CPU3 is up [ 5.989430] PM: noirq resume of devices complete after 0.606 msecs [ 5.990735] PM: early resume of devices complete after 1.017 msecs [ 6.134996] +1.8V_VDDIO: voltage operation not allowed [ 6.134999] mmc1: Switching to 3.3V signalling voltage failed [ 6.196887] PM: resume of devices complete after 206.142 msecs [ 6.275519] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:34 1970 [ 6.772751] PM: Syncing filesystems ... done. [ 6.782189] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 6.790316] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6.798942] Suspending console(s) (use no_console_suspend to debug) [ 6.854518] PM: suspend of devices complete after 48.751 msecs [ 6.855338] PM: late suspend of devices complete after 0.816 msecs [ 6.855997] PM: noirq suspend of devices complete after 0.655 msecs [ 6.855999] Disabling non-boot CPUs ... [ 6.856219] IRQ17 no longer affine to CPU1 [ 6.856398] CPU1: shutdown [ 6.869015] CPU2: shutdown [ 6.883898] CPU3: shutdown [ 6.908430] Entering suspend state LP1 [ 6.908443] Enabling non-boot CPUs ... [ 6.933666] CPU1 is up [ 6.958693] CPU2 is up [ 6.983796] CPU3 is up [ 6.984406] PM: noirq resume of devices complete after 0.606 msecs [ 6.985587] PM: early resume of devices complete after 0.873 msecs [ 7.129807] +1.8V_VDDIO: voltage operation not allowed [ 7.129810] mmc1: Switching to 3.3V signalling voltage failed [ 7.192863] PM: resume of devices complete after 207.266 msecs [ 7.271516] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:38 1970 [ 7.767511] PM: Syncing filesystems ... done. [ 7.777083] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.785291] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.793922] Suspending console(s) (use no_console_suspend to debug) [ 7.854574] PM: suspend of devices complete after 53.826 msecs [ 7.855789] PM: late suspend of devices complete after 1.205 msecs [ 7.856530] PM: noirq suspend of devices complete after 0.736 msecs [ 7.856532] Disabling non-boot CPUs ... [ 7.856903] CPU1: shutdown [ 7.889016] CPU2: shutdown [ 7.918659] IRQ17 no longer affine to CPU3 [ 7.918849] CPU3: shutdown [ 7.933418] Entering suspend state LP1 [ 7.933432] Enabling non-boot CPUs ... [ 7.958636] CPU1 is up [ 7.983662] CPU2 is up [ 8.008763] CPU3 is up [ 8.009370] PM: noirq resume of devices complete after 0.602 msecs [ 8.010699] PM: early resume of devices complete after 1.032 msecs [ 8.154975] +1.8V_VDDIO: voltage operation not allowed [ 8.154979] mmc1: Switching to 3.3V signalling voltage failed [ 8.217722] PM: resume of devices complete after 207.012 msecs [ 8.296384] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:42 1970 [ 8.797896] PM: Syncing filesystems ... done. [ 8.807385] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8.815498] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8.824138] Suspending console(s) (use no_console_suspend to debug) [ 8.879654] PM: suspend of devices complete after 48.708 msecs [ 8.880786] PM: late suspend of devices complete after 1.122 msecs [ 8.881528] PM: noirq suspend of devices complete after 0.738 msecs [ 8.881529] Disabling non-boot CPUs ... [ 8.881914] CPU1: shutdown [ 8.903789] IRQ17 no longer affine to CPU2 [ 8.903985] CPU2: shutdown [ 8.918824] CPU3: shutdown [ 8.943398] Entering suspend state LP1 [ 8.943411] Enabling non-boot CPUs ... [ 8.968619] CPU1 is up [ 8.993646] CPU2 is up [ 9.018746] CPU3 is up [ 9.019347] PM: noirq resume of devices complete after 0.596 msecs [ 9.020523] PM: early resume of devices complete after 0.868 msecs [ 9.164989] +1.8V_VDDIO: voltage operation not allowed [ 9.164992] mmc1: Switching to 3.3V signalling voltage failed [ 9.227405] PM: resume of devices complete after 206.871 msecs [ 9.306089] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:46 1970 [ 9.807876] PM: Syncing filesystems ... done. [ 9.817359] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.825469] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.834110] Suspending console(s) (use no_console_suspend to debug) [ 9.889614] PM: suspend of devices complete after 48.696 msecs [ 9.890659] PM: late suspend of devices complete after 1.037 msecs [ 9.891314] PM: noirq suspend of devices complete after 0.650 msecs [ 9.891316] Disabling non-boot CPUs ... [ 9.891693] CPU1: shutdown [ 9.903948] CPU2: shutdown [ 9.928842] CPU3: shutdown [ 9.943370] Entering suspend state LP1 [ 9.943384] Enabling non-boot CPUs ... [ 9.968599] CPU1 is up [ 9.993629] CPU2 is up [ 10.018727] CPU3 is up [ 10.019319] PM: noirq resume of devices complete after 0.587 msecs [ 10.020436] PM: early resume of devices complete after 0.814 msecs [ 10.165526] +1.8V_VDDIO: voltage operation not allowed [ 10.165528] mmc1: Switching to 3.3V signalling voltage failed [ 10.228119] PM: resume of devices complete after 207.672 msecs [ 10.302788] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:50 1970 [ 10.807945] PM: Syncing filesystems ... done. [ 10.817542] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.825729] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.834391] Suspending console(s) (use no_console_suspend to debug) [ 10.889385] PM: suspend of devices complete after 48.184 msecs [ 10.890594] PM: late suspend of devices complete after 1.200 msecs [ 10.891334] PM: noirq suspend of devices complete after 0.735 msecs [ 10.891336] Disabling non-boot CPUs ... [ 10.891533] IRQ17 no longer affine to CPU1 [ 10.891713] CPU1: shutdown [ 10.903928] CPU2: shutdown [ 10.918815] CPU3: shutdown [ 10.933346] Entering suspend state LP1 [ 10.933360] Enabling non-boot CPUs ... [ 10.958578] CPU1 is up [ 10.983602] CPU2 is up [ 11.008700] CPU3 is up [ 11.009303] PM: noirq resume of devices complete after 0.598 msecs [ 11.010664] PM: early resume of devices complete after 1.063 msecs [ 11.154900] +1.8V_VDDIO: voltage operation not allowed [ 11.154903] mmc1: Switching to 3.3V signalling voltage failed [ 11.217634] PM: resume of devices complete after 206.958 msecs [ 11.296307] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:54 1970 [ 11.797631] PM: Syncing filesystems ... done. [ 11.807126] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 11.815237] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 11.823873] Suspending console(s) (use no_console_suspend to debug) [ 11.879406] PM: suspend of devices complete after 48.726 msecs [ 11.880394] PM: late suspend of devices complete after 0.980 msecs [ 11.881140] PM: noirq suspend of devices complete after 0.742 msecs [ 11.881142] Disabling non-boot CPUs ... [ 11.881518] CPU1: shutdown [ 11.893903] CPU2: shutdown [ 11.918610] IRQ17 no longer affine to CPU3 [ 11.918797] CPU3: shutdown [ 11.933321] Entering suspend state LP1 [ 11.933335] Enabling non-boot CPUs ... [ 11.958561] CPU1 is up [ 11.983578] CPU2 is up [ 12.008689] CPU3 is up [ 12.009291] PM: noirq resume of devices complete after 0.597 msecs [ 12.010587] PM: early resume of devices complete after 0.980 msecs [ 12.154862] +1.8V_VDDIO: voltage operation not allowed [ 12.154865] mmc1: Switching to 3.3V signalling voltage failed [ 12.216096] PM: resume of devices complete after 205.500 msecs [ 12.294722] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:58 1970 [ 12.797617] PM: Syncing filesystems ... done. [ 12.807268] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.815475] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.824124] Suspending console(s) (use no_console_suspend to debug) [ 12.884473] PM: suspend of devices complete after 53.540 msecs [ 12.885684] PM: late suspend of devices complete after 1.202 msecs [ 12.886431] PM: noirq suspend of devices complete after 0.742 msecs [ 12.886433] Disabling non-boot CPUs ... [ 12.886800] CPU1: shutdown [ 12.908885] CPU2: shutdown [ 12.928737] CPU3: shutdown [ 12.943306] Entering suspend state LP1 [ 12.943320] Enabling non-boot CPUs ... [ 12.968533] CPU1 is up [ 12.993549] CPU2 is up [ 13.018651] CPU3 is up [ 13.019257] PM: noirq resume of devices complete after 0.602 msecs [ 13.020627] PM: early resume of devices complete after 1.069 msecs [ 13.164857] +1.8V_VDDIO: voltage operation not allowed [ 13.164860] mmc1: Switching to 3.3V signalling voltage failed [ 13.225785] PM: resume of devices complete after 205.147 msecs [ 13.300334] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:02 1970 [ 13.807517] PM: Syncing filesystems ... done. [ 13.817136] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 13.825248] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 13.833885] Suspending console(s) (use no_console_suspend to debug) [ 13.889345] PM: suspend of devices complete after 48.649 msecs [ 13.890599] PM: late suspend of devices complete after 1.245 msecs [ 13.891345] PM: noirq suspend of devices complete after 0.742 msecs [ 13.891347] Disabling non-boot CPUs ... [ 13.891711] CPU1: shutdown [ 13.903854] CPU2: shutdown [ 13.928569] IRQ17 no longer affine to CPU3 [ 13.928757] CPU3: shutdown [ 13.943274] Entering suspend state LP1 [ 13.943288] Enabling non-boot CPUs ... [ 13.968511] CPU1 is up [ 13.993534] CPU2 is up [ 14.018640] CPU3 is up [ 14.019246] PM: noirq resume of devices complete after 0.601 msecs [ 14.020622] PM: early resume of devices complete after 1.066 msecs [ 14.165632] +1.8V_VDDIO: voltage operation not allowed [ 14.165634] mmc1: Switching to 3.3V signalling voltage failed [ 14.226397] PM: resume of devices complete after 205.765 msecs [ 14.305191] Restarting tasks ... done. root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE