U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################### 3.5 MiB/s done Bytes transferred = 7239896 (6e78d8 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 2.8 MiB/s done Bytes transferred = 66901 (10555 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6e78d8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013554 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.7.0-rc2-95420-gaf8c34c (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jun 5 15:04:22 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c141bb40, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 13 pages/cpu @eef89000 s23808 r8192 d21248 u53248 [ 0.000000] pcpu-alloc: s23808 r8192 d21248 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1996016K/2097148K available (9529K kernel code, 1142K rwdata, 4476K rodata, 2048K init, 343K bss, 35596K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc10ad594 (14998 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc141dba0 (1143 kB) [ 0.000000] .bss : 0xc141f000 - 0xc1474ca0 ( 344 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000012] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000018] Switching to timer-based delay loop, resolution 1000ns [ 0.001757] Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.001764] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001770] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001774] Switching to timer-based delay loop, resolution 83ns [ 0.001980] Console: colour dummy device 80x30 [ 0.001992] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000) [ 0.001998] pid_max: default: 32768 minimum: 301 [ 0.002036] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002040] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002286] CPU: Testing write buffer coherency: ok [ 0.002399] /cpus/cpu@0 missing clock-frequency property [ 0.002414] /cpus/cpu@1 missing clock-frequency property [ 0.002428] /cpus/cpu@2 missing clock-frequency property [ 0.002443] /cpus/cpu@3 missing clock-frequency property [ 0.002448] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002457] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.003696] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004293] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006935] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.011930] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.016655] Brought up 4 CPUs [ 0.016663] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.016666] CPU: All CPU(s) started in SVC mode. [ 0.017204] devtmpfs: initialized [ 0.023491] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.023763] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.024285] pinctrl core: initialized pinctrl subsystem [ 0.024960] NET: Registered protocol family 16 [ 0.025634] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.036688] cpuidle: using governor menu [ 0.043044] No ATAGs? [ 0.043055] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.043060] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.045152] Serial: AMBA PL011 UART driver [ 0.046121] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.063434] +5V_SYS: supplied by +VDD_MUX [ 0.063540] +3.3V_SYS: supplied by +VDD_MUX [ 0.063761] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.063766] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.063796] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.063801] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.063831] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.063835] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.063864] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.063868] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.063948] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.063952] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.063981] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.063985] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.065104] vgaarb: loaded [ 0.065390] SCSI subsystem initialized [ 0.065455] libata version 3.00 loaded. [ 0.065554] usbcore: registered new interface driver usbfs [ 0.065577] usbcore: registered new interface driver hub [ 0.065605] usbcore: registered new device driver usb [ 0.067008] pps_core: LinuxPPS API ver. 1 registered [ 0.067012] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.067020] PTP clock support registered [ 0.067091] EDAC MC: Ver: 3.0.0 [ 0.067526] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.067535] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.068024] clocksource: Switched to clocksource arch_sys_counter [ 0.071653] NET: Registered protocol family 2 [ 0.071864] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.071897] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.071959] TCP: Hash tables configured (established 8192 bind 8192) [ 0.071981] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.071995] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.072056] NET: Registered protocol family 1 [ 0.072160] RPC: Registered named UNIX socket transport module. [ 0.072164] RPC: Registered udp transport module. [ 0.072166] RPC: Registered tcp transport module. [ 0.072169] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.072173] PCI: CLS 0 bytes, default 64 [ 0.072616] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.073169] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.073451] workingset: timestamp_bits=28 max_order=19 bucket_order=0 [ 0.077222] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.077525] NFS: Registering the id_resolver key type [ 0.077542] Key type id_resolver registered [ 0.077545] Key type id_legacy registered [ 0.077562] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.078043] bounce: pool size: 64 pages [ 0.078116] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.078120] io scheduler noop registered [ 0.078123] io scheduler deadline registered [ 0.078134] io scheduler cfq registered (default) [ 0.080038] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.088882] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.089579] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.110700] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.111845] console [ttyS0] disabled [ 0.111861] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 0.964746] console [ttyS0] enabled [ 0.968537] SuperH (H)SCI(F) driver initialized [ 0.973423] msm_serial: driver initialized [ 0.977573] STMicroelectronics ASC driver initialized [ 0.984051] [drm] Initialized drm 1.1.0 20060810 [ 0.990085] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 0.996641] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.003859] panel supply power not found, using dummy regulator [ 1.013559] brd: module loaded [ 1.018707] loop: module loaded [ 1.022743] as3722 4-0040: AS3722 with revision 0x1 found [ 1.032457] as3722-sd2: supplied by +5V_SYS [ 1.036884] as3722-sd3: supplied by +5V_SYS [ 1.041224] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.047407] as3722-sd4: supplied by +5V_SYS [ 1.051743] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.057488] as3722-sd5: supplied by +5V_SYS [ 1.063089] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.068826] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.074854] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.080475] as3722-ldo3: supplied by +3.3V_SYS [ 1.084927] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.092505] as3722-ldo4: supplied by +3.3V_SYS [ 1.097104] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.103132] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.107894] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.114586] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.120620] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.125390] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.131954] as3722-ldo9: supplied by +5V_SYS [ 1.136518] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.142728] as3722-ldo10: supplied by +5V_SYS [ 1.147236] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.153688] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.171965] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.178240] libphy: Fixed MDIO Bus: probed [ 1.182564] CAN device driver interface [ 1.187114] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.194065] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.200790] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.208200] usbcore: registered new interface driver pegasus [ 1.213870] usbcore: registered new interface driver asix [ 1.219273] usbcore: registered new interface driver ax88179_178a [ 1.225369] usbcore: registered new interface driver cdc_ether [ 1.231212] usbcore: registered new interface driver smsc75xx [ 1.236968] usbcore: registered new interface driver smsc95xx [ 1.242718] usbcore: registered new interface driver net1080 [ 1.248383] usbcore: registered new interface driver cdc_subset [ 1.254306] usbcore: registered new interface driver zaurus [ 1.259896] usbcore: registered new interface driver cdc_ncm [ 1.266264] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.272781] ehci-pci: EHCI PCI platform driver [ 1.277232] ehci-platform: EHCI generic platform driver [ 1.282522] ehci-omap: OMAP-EHCI Host Controller driver [ 1.287788] ehci-orion: EHCI orion driver [ 1.291840] SPEAr-ehci: EHCI SPEAr driver [ 1.295896] ehci-st: EHCI STMicroelectronics driver [ 1.300816] ehci-exynos: EHCI EXYNOS driver [ 1.305049] ehci-atmel: EHCI Atmel driver [ 1.309102] tegra-ehci: Tegra EHCI driver [ 1.313171] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.319344] ohci-pci: OHCI PCI platform driver [ 1.323795] ohci-platform: OHCI generic platform driver [ 1.329070] ohci-omap3: OHCI OMAP3 driver [ 1.333122] SPEAr-ohci: OHCI SPEAr driver [ 1.337169] ohci-st: OHCI STMicroelectronics driver [ 1.342089] ohci-atmel: OHCI Atmel driver [ 1.346364] usbcore: registered new interface driver usb-storage [ 1.352956] mousedev: PS/2 mouse device common for all mice [ 1.359246] 1-0015 supply vcc not found, using dummy regulator [ 1.366449] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.373314] as3722-rtc as3722-rtc: RTC interrupt 370 [ 1.380228] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.387368] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.393737] i2c /dev entries driver [ 1.399629] 0-004c supply vcc not found, using dummy regulator [ 1.409519] sdhci: Secure Digital Host Controller Interface driver [ 1.415700] sdhci: Copyright(c) Pierre Ossman [ 1.420613] Synopsys Designware Multimedia Card Interface Driver [ 1.427008] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.432955] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.438622] mmc0: Unknown controller version (3). You may experience problems. [ 1.445985] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.450865] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.455756] mmc0: Unknown controller version (3). You may experience problems. [ 1.463087] mmc0: Unknown controller version (3). You may experience problems. [ 1.470344] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.508032] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 1.516612] ledtrig-cpu: registered to indicate activity on CPUs [ 1.522728] usbcore: registered new interface driver usbhid [ 1.528292] usbhid: USB HID core driver [ 1.534246] NET: Registered protocol family 10 [ 1.538996] sit: IPv6 over IPv4 tunneling driver [ 1.543957] NET: Registered protocol family 17 [ 1.548407] can: controller area network core (rev 20120528 abi 9) [ 1.554614] NET: Registered protocol family 29 [ 1.559056] can: raw protocol (rev 20120528) [ 1.563325] can: broadcast manager protocol (rev 20120528 t) [ 1.568982] can: netlink gateway (rev 20130117) max_hops=1 [ 1.574628] Key type dns_resolver registered [ 1.579158] ThumbEE CPU extension supported. [ 1.583431] Registering SWP/SWPB emulation handler [ 1.590129] +3.3V_RUN: supplied by +3.3V_SYS [ 1.595084] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.597551] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 1.608855] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.613573] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.618213] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.623544] +VDD_LED: supplied by +VDD_MUX [ 1.627823] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.632616] +5V_USB_HS: supplied by +5V_SYS [ 1.637281] +5V_USB_SS: supplied by +5V_SYS [ 1.639792] mmc0: new high speed MMC card at address 0001 [ 1.640543] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.641146] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.641572] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.641971] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 1.647675] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.675705] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.680920] +3.3V_LP0: supplied by +3.3V_SYS [ 1.685832] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.686081] elan_i2c 1-0015: failed to read report data: -121 [ 1.697604] +5V_HDMI_CON: supplied by +5V_SYS [ 1.702842] usb3-0 supply vbus not found, using dummy regulator [ 1.708877] usb3-1 supply vbus not found, using dummy regulator [ 1.718275] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.725008] panel supply power not found, using dummy regulator [ 1.731571] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.737246] mmc1: Unknown controller version (3). You may experience problems. [ 1.744714] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.751089] +1.8V_VDDIO: voltage operation not allowed [ 1.756265] mmc1: Switching to 3.3V signalling voltage failed [ 1.788116] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit [ 1.796865] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.801764] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.806675] mmc2: Unknown controller version (3). You may experience problems. [ 1.814091] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.825989] elan_i2c 1-0015: invalid report id data (ff) [ 1.853268] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 1.884596] mmc1: new high speed SDIO card at address 0001 [ 1.955737] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.962360] [drm] No driver support for vblank timestamp query. [ 2.010759] mmc2: new high speed SDHC card at address 0007 [ 2.011371] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.020290] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.020294] GPT:3014591 != 15564799 [ 2.020295] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.020296] GPT:3014591 != 15564799 [ 2.020297] GPT: Use GNU Parted to correct GPT errors. [ 2.020322] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.024358] Console: switching to colour frame buffer device 170x48 [ 2.075793] drm drm: fb0: frame buffer device [ 2.093119] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.100040] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.107833] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822) [ 2.120417] +1.8V_RUN_CAM: disabling [ 2.124217] +3.3V_RUN_CAM: disabling [ 2.127950] +1.2V_RUN_CAM_FRONT: disabling [ 2.132228] +1.05V_RUN_CAM_REAR: disabling [ 2.136529] +2.8V_RUN_TOUCH: disabling [ 2.140512] +2.8V_RUN_CAM_AF: disabling [ 2.144554] +1.8V_RUN_VPP_FUSE: disabling [ 2.148740] +5V_VDD_TS_SW: disabling [ 2.152312] +5V_USB_HS: disabling [ 2.155645] +5V_USB_SS: disabling [ 2.159923] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.168634] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.620938] EXT4-fs (mmcblk0p3): recovery complete [ 2.625753] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.633875] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.641031] devtmpfs: mounted [ 2.644722] Freeing unused kernel memory: 2048K (c1100000 - c1300000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# mount -t sysfs none /sys root@(none):/# root@(none):/# mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:27 1970 [ 5.832841] PM: Syncing filesystems ... done. [ 5.842868] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.851027] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.859661] Suspending console(s) (use no_console_suspend to debug) [ 5.919495] PM: suspend of devices complete after 53.013 msecs [ 5.920720] PM: late suspend of devices complete after 1.215 msecs [ 5.921465] PM: noirq suspend of devices complete after 0.740 msecs [ 5.921467] Disabling non-boot CPUs ... [ 5.921872] CPU1: shutdown [ 5.934044] CPU2: shutdown [ 5.953797] IRQ17 no longer affine to CPU3 [ 5.953977] CPU3: shutdown [ 5.968471] Entering suspend state LP1 [ 5.968484] Enabling non-boot CPUs ... [ 5.993697] CPU1 is up [ 6.018721] CPU2 is up [ 6.043825] CPU3 is up [ 6.044331] PM: noirq resume of devices complete after 0.502 msecs [ 6.045783] PM: early resume of devices complete after 1.153 msecs [ 6.189987] +1.8V_VDDIO: voltage operation not allowed [ 6.189990] mmc1: Switching to 3.3V signalling voltage failed [ 6.252339] PM: resume of devices complete after 206.546 msecs [ 6.331027] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:31 1970 [ 6.742817] PM: Syncing filesystems ... done. [ 6.752241] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 6.760425] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6.769057] Suspending console(s) (use no_console_suspend to debug) [ 6.829566] PM: suspend of devices complete after 53.688 msecs [ 6.830383] PM: late suspend of devices complete after 0.812 msecs [ 6.831041] PM: noirq suspend of devices complete after 0.655 msecs [ 6.831043] Disabling non-boot CPUs ... [ 6.831431] CPU1: shutdown [ 6.844051] CPU2: shutdown [ 6.868726] IRQ17 no longer affine to CPU3 [ 6.868912] CPU3: shutdown [ 6.883450] Entering suspend state LP1 [ 6.883463] Enabling non-boot CPUs ... [ 6.908681] CPU1 is up [ 6.933703] CPU2 is up [ 6.958809] CPU3 is up [ 6.959295] PM: noirq resume of devices complete after 0.481 msecs [ 6.960482] PM: early resume of devices complete after 0.870 msecs [ 7.104977] +1.8V_VDDIO: voltage operation not allowed [ 7.104982] mmc1: Switching to 3.3V signalling voltage failed [ 7.167372] PM: resume of devices complete after 206.879 msecs [ 7.246063] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:35 1970 [ 7.657248] PM: Syncing filesystems ... done. [ 7.666711] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.674895] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.683582] Suspending console(s) (use no_console_suspend to debug) [ 7.744614] PM: suspend of devices complete after 54.210 msecs [ 7.745862] PM: late suspend of devices complete after 1.238 msecs [ 7.746613] PM: noirq suspend of devices complete after 0.746 msecs [ 7.746614] Disabling non-boot CPUs ... [ 7.746982] CPU1: shutdown [ 7.769026] CPU2: shutdown [ 7.798676] IRQ17 no longer affine to CPU3 [ 7.798866] CPU3: shutdown [ 7.813432] Entering suspend state LP1 [ 7.813446] Enabling non-boot CPUs ... [ 7.838655] CPU1 is up [ 7.863680] CPU2 is up [ 7.888782] CPU3 is up [ 7.889256] PM: noirq resume of devices complete after 0.469 msecs [ 7.890624] PM: early resume of devices complete after 1.064 msecs [ 8.035781] +1.8V_VDDIO: voltage operation not allowed [ 8.035786] mmc1: Switching to 3.3V signalling voltage failed [ 8.097890] PM: resume of devices complete after 207.255 msecs [ 8.177178] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:39 1970 [ 8.587508] PM: Syncing filesystems ... done. [ 8.597078] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 8.605266] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 8.613923] Suspending console(s) (use no_console_suspend to debug) [ 8.679547] PM: suspend of devices complete after 58.804 msecs [ 8.680747] PM: late suspend of devices complete after 1.190 msecs [ 8.681493] PM: noirq suspend of devices complete after 0.741 msecs [ 8.681495] Disabling non-boot CPUs ... [ 8.681869] CPU1: shutdown [ 8.698791] IRQ17 no longer affine to CPU2 [ 8.698984] CPU2: shutdown [ 8.723871] CPU3: shutdown [ 8.738402] Entering suspend state LP1 [ 8.738415] Enabling non-boot CPUs ... [ 8.763631] CPU1 is up [ 8.788660] CPU2 is up [ 8.813763] CPU3 is up [ 8.814239] PM: noirq resume of devices complete after 0.471 msecs [ 8.815665] PM: early resume of devices complete after 1.136 msecs [ 8.959931] +1.8V_VDDIO: voltage operation not allowed [ 8.959936] mmc1: Switching to 3.3V signalling voltage failed [ 9.022690] PM: resume of devices complete after 207.013 msecs [ 9.101367] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:43 1970 [ 9.512558] PM: Syncing filesystems ... done. [ 9.521983] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 9.530176] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 9.538785] Suspending console(s) (use no_console_suspend to debug) [ 9.604522] PM: suspend of devices complete after 58.915 msecs [ 9.605725] PM: late suspend of devices complete after 1.194 msecs [ 9.606472] PM: noirq suspend of devices complete after 0.742 msecs [ 9.606473] Disabling non-boot CPUs ... [ 9.606851] CPU1: shutdown [ 9.623776] IRQ17 no longer affine to CPU2 [ 9.623969] CPU2: shutdown [ 9.648851] CPU3: shutdown [ 9.663378] Entering suspend state LP1 [ 9.663391] Enabling non-boot CPUs ... [ 9.688607] CPU1 is up [ 9.713635] CPU2 is up [ 9.738736] CPU3 is up [ 9.739218] PM: noirq resume of devices complete after 0.477 msecs [ 9.740465] PM: early resume of devices complete after 0.929 msecs [ 9.885115] +1.8V_VDDIO: voltage operation not allowed [ 9.885123] mmc1: Switching to 3.3V signalling voltage failed [ 9.947608] PM: resume of devices complete after 207.133 msecs [ 10.026302] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:47 1970 [ 10.437871] PM: Syncing filesystems ... done. [ 10.447447] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.455631] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.464241] Suspending console(s) (use no_console_suspend to debug) [ 10.529500] PM: suspend of devices complete after 58.436 msecs [ 10.530711] PM: late suspend of devices complete after 1.202 msecs [ 10.531456] PM: noirq suspend of devices complete after 0.740 msecs [ 10.531458] Disabling non-boot CPUs ... [ 10.531832] CPU1: shutdown [ 10.553755] IRQ17 no longer affine to CPU2 [ 10.553948] CPU2: shutdown [ 10.578828] CPU3: shutdown [ 10.593363] Entering suspend state LP1 [ 10.593376] Enabling non-boot CPUs ... [ 10.618587] CPU1 is up [ 10.643612] CPU2 is up [ 10.668726] CPU3 is up [ 10.669195] PM: noirq resume of devices complete after 0.464 msecs [ 10.670560] PM: early resume of devices complete after 1.062 msecs [ 10.815031] +1.8V_VDDIO: voltage operation not allowed [ 10.815034] mmc1: Switching to 3.3V signalling voltage failed [ 10.876731] PM: resume of devices complete after 206.159 msecs [ 10.955421] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:51 1970 [ 11.367643] PM: Syncing filesystems ... done. [ 11.376939] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 11.385111] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 11.393783] Suspending console(s) (use no_console_suspend to debug) [ 11.454571] PM: suspend of devices complete after 53.964 msecs [ 11.455615] PM: late suspend of devices complete after 1.035 msecs [ 11.456491] PM: noirq suspend of devices complete after 0.868 msecs [ 11.456493] Disabling non-boot CPUs ... [ 11.456876] CPU1: shutdown [ 11.468915] CPU2: shutdown [ 11.493618] IRQ17 no longer affine to CPU3 [ 11.493802] CPU3: shutdown [ 11.508342] Entering suspend state LP1 [ 11.508355] Enabling non-boot CPUs ... [ 11.533569] CPU1 is up [ 11.558593] CPU2 is up [ 11.583693] CPU3 is up [ 11.584180] PM: noirq resume of devices complete after 0.482 msecs [ 11.585536] PM: early resume of devices complete after 1.066 msecs [ 11.730074] +1.8V_VDDIO: voltage operation not allowed [ 11.730077] mmc1: Switching to 3.3V signalling voltage failed [ 11.792621] PM: resume of devices complete after 207.072 msecs [ 11.871295] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:55 1970 [ 12.281929] PM: Syncing filesystems ... done. [ 12.291219] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.299331] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.307986] Suspending console(s) (use no_console_suspend to debug) [ 12.369546] PM: suspend of devices complete after 54.739 msecs [ 12.370587] PM: late suspend of devices complete after 1.032 msecs [ 12.371464] PM: noirq suspend of devices complete after 0.870 msecs [ 12.371467] Disabling non-boot CPUs ... [ 12.371674] IRQ17 no longer affine to CPU1 [ 12.371855] CPU1: shutdown [ 12.393891] CPU2: shutdown [ 12.418781] CPU3: shutdown [ 12.433313] Entering suspend state LP1 [ 12.433327] Enabling non-boot CPUs ... [ 12.458540] CPU1 is up [ 12.483566] CPU2 is up [ 12.508665] CPU3 is up [ 12.509139] PM: noirq resume of devices complete after 0.469 msecs [ 12.510499] PM: early resume of devices complete after 1.059 msecs [ 12.655049] +1.8V_VDDIO: voltage operation not allowed [ 12.655054] mmc1: Switching to 3.3V signalling voltage failed [ 12.717354] PM: resume of devices complete after 206.845 msecs [ 12.796046] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:59 1970 [ 13.207806] PM: Syncing filesystems ... done. [ 13.217230] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 13.225404] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 13.234015] Suspending console(s) (use no_console_suspend to debug) [ 13.294393] PM: suspend of devices complete after 53.557 msecs [ 13.295210] PM: late suspend of devices complete after 0.813 msecs [ 13.295868] PM: noirq suspend of devices complete after 0.655 msecs [ 13.295870] Disabling non-boot CPUs ... [ 13.296082] IRQ17 no longer affine to CPU1 [ 13.296261] CPU1: shutdown [ 13.308875] CPU2: shutdown [ 13.333769] CPU3: shutdown [ 13.348293] Entering suspend state LP1 [ 13.348306] Enabling non-boot CPUs ... [ 13.373523] CPU1 is up [ 13.398544] CPU2 is up [ 13.423652] CPU3 is up [ 13.424138] PM: noirq resume of devices complete after 0.481 msecs [ 13.425332] PM: early resume of devices complete after 0.881 msecs [ 13.569842] +1.8V_VDDIO: voltage operation not allowed [ 13.569847] mmc1: Switching to 3.3V signalling voltage failed [ 13.632455] PM: resume of devices complete after 207.113 msecs [ 13.711133] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:03 1970 [ 14.122791] PM: Syncing filesystems ... done. [ 14.132363] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.140543] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.149157] Suspending console(s) (use no_console_suspend to debug) [ 14.209423] PM: suspend of devices complete after 53.442 msecs [ 14.210630] PM: late suspend of devices complete after 1.197 msecs [ 14.211374] PM: noirq suspend of devices complete after 0.740 msecs [ 14.211376] Disabling non-boot CPUs ... [ 14.211746] CPU1: shutdown [ 14.233659] IRQ17 no longer affine to CPU2 [ 14.233852] CPU2: shutdown [ 14.258735] CPU3: shutdown [ 14.273264] Entering suspend state LP1 [ 14.273278] Enabling non-boot CPUs ... [ 14.298496] CPU1 is up [ 14.323522] CPU2 is up [ 14.348629] CPU3 is up [ 14.349110] PM: noirq resume of devices complete after 0.477 msecs [ 14.350463] PM: early resume of devices complete after 1.042 msecs [ 14.494988] +1.8V_VDDIO: voltage operation not allowed [ 14.494994] mmc1: Switching to 3.3V signalling voltage failed [ 14.557309] PM: resume of devices complete after 206.836 msecs [ 14.635989] Restarting tasks ... done. root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE