U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################### 3.6 MiB/s done Bytes transferred = 7239896 (6e78d8 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 66901 (10555 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6e78d8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013554 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.7.0-rc2-95420-gaf8c34c (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jun 5 15:04:22 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c141bb40, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 13 pages/cpu @eef89000 s23808 r8192 d21248 u53248 [ 0.000000] pcpu-alloc: s23808 r8192 d21248 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1996016K/2097148K available (9529K kernel code, 1142K rwdata, 4476K rodata, 2048K init, 343K bss, 35596K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc10ad594 (14998 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc141dba0 (1143 kB) [ 0.000000] .bss : 0xc141f000 - 0xc1474ca0 ( 344 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000012] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000018] Switching to timer-based delay loop, resolution 1000ns [ 0.001738] Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.001744] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001751] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001755] Switching to timer-based delay loop, resolution 83ns [ 0.001955] Console: colour dummy device 80x30 [ 0.001968] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000) [ 0.001974] pid_max: default: 32768 minimum: 301 [ 0.002012] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002016] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002262] CPU: Testing write buffer coherency: ok [ 0.002375] /cpus/cpu@0 missing clock-frequency property [ 0.002389] /cpus/cpu@1 missing clock-frequency property [ 0.002404] /cpus/cpu@2 missing clock-frequency property [ 0.002418] /cpus/cpu@3 missing clock-frequency property [ 0.002422] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002432] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.003675] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004273] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006913] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.011911] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.016635] Brought up 4 CPUs [ 0.016642] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.016645] CPU: All CPU(s) started in SVC mode. [ 0.017181] devtmpfs: initialized [ 0.023443] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.023712] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.024238] pinctrl core: initialized pinctrl subsystem [ 0.024903] NET: Registered protocol family 16 [ 0.025572] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.036668] cpuidle: using governor menu [ 0.043011] No ATAGs? [ 0.043024] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.043028] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.045118] Serial: AMBA PL011 UART driver [ 0.046086] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.063414] +5V_SYS: supplied by +VDD_MUX [ 0.063520] +3.3V_SYS: supplied by +VDD_MUX [ 0.063743] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.063748] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.063779] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.063783] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.063813] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.063817] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.063847] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.063851] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.063931] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.063935] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.063964] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.063968] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.065091] vgaarb: loaded [ 0.065376] SCSI subsystem initialized [ 0.065441] libata version 3.00 loaded. [ 0.065540] usbcore: registered new interface driver usbfs [ 0.065563] usbcore: registered new interface driver hub [ 0.065590] usbcore: registered new device driver usb [ 0.066991] pps_core: LinuxPPS API ver. 1 registered [ 0.066996] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.067004] PTP clock support registered [ 0.067074] EDAC MC: Ver: 3.0.0 [ 0.067507] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.067516] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.067997] clocksource: Switched to clocksource arch_sys_counter [ 0.071639] NET: Registered protocol family 2 [ 0.071849] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.071882] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.071945] TCP: Hash tables configured (established 8192 bind 8192) [ 0.071967] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.071981] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.072042] NET: Registered protocol family 1 [ 0.072145] RPC: Registered named UNIX socket transport module. [ 0.072149] RPC: Registered udp transport module. [ 0.072151] RPC: Registered tcp transport module. [ 0.072154] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.072158] PCI: CLS 0 bytes, default 64 [ 0.072602] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.073155] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.073434] workingset: timestamp_bits=28 max_order=19 bucket_order=0 [ 0.077208] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.077508] NFS: Registering the id_resolver key type [ 0.077521] Key type id_resolver registered [ 0.077525] Key type id_legacy registered [ 0.077541] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.078029] bounce: pool size: 64 pages [ 0.078102] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.078107] io scheduler noop registered [ 0.078109] io scheduler deadline registered [ 0.078120] io scheduler cfq registered (default) [ 0.080032] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.088878] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.089569] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.110669] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.111807] console [ttyS0] disabled [ 0.111823] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 0.964719] console [ttyS0] enabled [ 0.968508] SuperH (H)SCI(F) driver initialized [ 0.973392] msm_serial: driver initialized [ 0.977542] STMicroelectronics ASC driver initialized [ 0.984025] [drm] Initialized drm 1.1.0 20060810 [ 0.990055] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 0.996606] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.003822] panel supply power not found, using dummy regulator [ 1.013514] brd: module loaded [ 1.018654] loop: module loaded [ 1.022690] as3722 4-0040: AS3722 with revision 0x1 found [ 1.032407] as3722-sd2: supplied by +5V_SYS [ 1.036854] as3722-sd3: supplied by +5V_SYS [ 1.041192] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.047380] as3722-sd4: supplied by +5V_SYS [ 1.051715] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.057461] as3722-sd5: supplied by +5V_SYS [ 1.063060] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.068794] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.074821] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.080441] as3722-ldo3: supplied by +3.3V_SYS [ 1.084891] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.092469] as3722-ldo4: supplied by +3.3V_SYS [ 1.097067] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.103095] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.107857] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.114549] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.120582] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.125352] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.131917] as3722-ldo9: supplied by +5V_SYS [ 1.136481] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.142689] as3722-ldo10: supplied by +5V_SYS [ 1.147196] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.153642] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.171900] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.178202] libphy: Fixed MDIO Bus: probed [ 1.182528] CAN device driver interface [ 1.187074] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.194024] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.200743] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.208153] usbcore: registered new interface driver pegasus [ 1.213823] usbcore: registered new interface driver asix [ 1.219226] usbcore: registered new interface driver ax88179_178a [ 1.225322] usbcore: registered new interface driver cdc_ether [ 1.231165] usbcore: registered new interface driver smsc75xx [ 1.236921] usbcore: registered new interface driver smsc95xx [ 1.242670] usbcore: registered new interface driver net1080 [ 1.248336] usbcore: registered new interface driver cdc_subset [ 1.254260] usbcore: registered new interface driver zaurus [ 1.259849] usbcore: registered new interface driver cdc_ncm [ 1.266220] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.272739] ehci-pci: EHCI PCI platform driver [ 1.277189] ehci-platform: EHCI generic platform driver [ 1.282478] ehci-omap: OMAP-EHCI Host Controller driver [ 1.287746] ehci-orion: EHCI orion driver [ 1.291799] SPEAr-ehci: EHCI SPEAr driver [ 1.295856] ehci-st: EHCI STMicroelectronics driver [ 1.300777] ehci-exynos: EHCI EXYNOS driver [ 1.305010] ehci-atmel: EHCI Atmel driver [ 1.309063] tegra-ehci: Tegra EHCI driver [ 1.313131] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.319305] ohci-pci: OHCI PCI platform driver [ 1.323756] ohci-platform: OHCI generic platform driver [ 1.329031] ohci-omap3: OHCI OMAP3 driver [ 1.333083] SPEAr-ohci: OHCI SPEAr driver [ 1.337130] ohci-st: OHCI STMicroelectronics driver [ 1.342049] ohci-atmel: OHCI Atmel driver [ 1.346323] usbcore: registered new interface driver usb-storage [ 1.352917] mousedev: PS/2 mouse device common for all mice [ 1.358938] 1-0015 supply vcc not found, using dummy regulator [ 1.360756] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.360760] as3722-rtc as3722-rtc: RTC interrupt 370 [ 1.363018] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.363040] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.363324] i2c /dev entries driver [ 1.366662] 0-004c supply vcc not found, using dummy regulator [ 1.401874] sdhci: Secure Digital Host Controller Interface driver [ 1.408047] sdhci: Copyright(c) Pierre Ossman [ 1.412952] Synopsys Designware Multimedia Card Interface Driver [ 1.419347] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.425291] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.430955] mmc0: Unknown controller version (3). You may experience problems. [ 1.438314] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.443190] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.448079] mmc0: Unknown controller version (3). You may experience problems. [ 1.455403] mmc0: Unknown controller version (3). You may experience problems. [ 1.462642] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.503010] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 1.511606] ledtrig-cpu: registered to indicate activity on CPUs [ 1.517736] usbcore: registered new interface driver usbhid [ 1.523306] usbhid: USB HID core driver [ 1.529222] NET: Registered protocol family 10 [ 1.533967] sit: IPv6 over IPv4 tunneling driver [ 1.538904] NET: Registered protocol family 17 [ 1.543354] can: controller area network core (rev 20120528 abi 9) [ 1.549556] NET: Registered protocol family 29 [ 1.553998] can: raw protocol (rev 20120528) [ 1.558268] can: broadcast manager protocol (rev 20120528 t) [ 1.563928] can: netlink gateway (rev 20130117) max_hops=1 [ 1.569566] Key type dns_resolver registered [ 1.574076] ThumbEE CPU extension supported. [ 1.578356] Registering SWP/SWPB emulation handler [ 1.585802] +3.3V_RUN: supplied by +3.3V_SYS [ 1.590703] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.596386] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.601133] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.605862] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.607387] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 1.619296] +VDD_LED: supplied by +VDD_MUX [ 1.623824] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.628634] +5V_USB_HS: supplied by +5V_SYS [ 1.632980] +5V_USB_SS: supplied by +5V_SYS [ 1.637924] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.643415] +3.3V_LP0: supplied by +3.3V_SYS [ 1.644569] mmc0: new high speed MMC card at address 0001 [ 1.645311] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.645739] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.645986] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.646631] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 1.652541] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.681551] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.681816] elan_i2c 1-0015: failed to read report data: -121 [ 1.682175] elan_i2c 1-0015: failed to read report data: -121 [ 1.699079] +5V_HDMI_CON: supplied by +5V_SYS [ 1.704316] usb3-0 supply vbus not found, using dummy regulator [ 1.710339] usb3-1 supply vbus not found, using dummy regulator [ 1.719702] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.726451] panel supply power not found, using dummy regulator [ 1.733629] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.739329] mmc1: Unknown controller version (3). You may experience problems. [ 1.746795] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.753077] +1.8V_VDDIO: voltage operation not allowed [ 1.758230] mmc1: Switching to 3.3V signalling voltage failed [ 1.793087] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit [ 1.801835] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.806735] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.811648] mmc2: Unknown controller version (3). You may experience problems. [ 1.819067] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.840058] elan_i2c 1-0015: invalid report id data (ff) [ 1.859133] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 1.887026] mmc1: new high speed SDIO card at address 0001 [ 1.961987] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.968612] [drm] No driver support for vblank timestamp query. [ 2.015573] mmc2: new high speed SDHC card at address 0007 [ 2.016026] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.024707] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.024711] GPT:3014591 != 15564799 [ 2.024712] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.024713] GPT:3014591 != 15564799 [ 2.024714] GPT: Use GNU Parted to correct GPT errors. [ 2.024743] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.030342] Console: switching to colour frame buffer device 170x48 [ 2.081789] drm drm: fb0: frame buffer device [ 2.103085] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.109852] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.116806] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.129480] +1.8V_RUN_CAM: disabling [ 2.133288] +3.3V_RUN_CAM: disabling [ 2.137061] +1.2V_RUN_CAM_FRONT: disabling [ 2.141378] +1.05V_RUN_CAM_REAR: disabling [ 2.145701] +2.8V_RUN_TOUCH: disabling [ 2.149670] +2.8V_RUN_CAM_AF: disabling [ 2.153689] +1.8V_RUN_VPP_FUSE: disabling [ 2.157801] +5V_VDD_TS_SW: disabling [ 2.161400] +5V_USB_HS: disabling [ 2.164711] +5V_USB_SS: disabling [ 2.169023] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.177572] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.643156] EXT4-fs (mmcblk0p3): recovery complete [ 2.648680] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.656805] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.663437] devtmpfs: mounted [ 2.667101] Freeing unused kernel memory: 2048K (c1100000 - c1300000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#