Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2016-05-31 07:51:06.072550092 -0700
+++ /tmp/foob	2016-05-31 07:51:06.072550092 -0700
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0
-Linux version 4.6.0+ (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Sun May 15 16:07:11 PDT 2016
+Linux version 4.7.0-rc1+ (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue May 31 07:39:48 PDT 2016
 Boot CPU: AArch64 Processor [411fd070]
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -9,7 +9,7 @@
 psci: PSCIv0.2 detected in firmware.
 psci: Using standard PSCI v0.2 function IDs
 psci: Trusted OS migration not required
-percpu: Embedded 20 pages/cpu @ffffffc03efd3000 s43008 r8192 d30720 u81920
+percpu: Embedded 20 pages/cpu @ffff80003efd0000 s42752 r8192 d30976 u81920
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
 CPU features: enabling workaround for ARM erratum 834220
@@ -18,20 +18,21 @@
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
 Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
-software IO TLB [mem 0x79c00000-0x7dc00000] (64MB) mapped at [ffffffc039c00000-ffffffc03dbfffff]
-Memory: 936376K/1048576K available (7000K kernel code, 621K rwdata, 2956K rodata, 816K init, 244K bss, 95816K reserved, 16384K cma-reserved)
+software IO TLB [mem 0x79c00000-0x7dc00000] (64MB) mapped at [ffff800039c00000-ffff80003dbfffff]
+Memory: 935196K/1048576K available (7492K kernel code, 647K rwdata, 3448K rodata, 960K init, 259K bss, 96996K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
-    modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
-    vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
-      .text : 0xffffff8008080000 - 0xffffff8008754000   (  6992 KB)
-    .rodata : 0xffffff8008754000 - 0xffffff8008a3b000   (  2972 KB)
-      .init : 0xffffff8008a3b000 - 0xffffff8008b07000   (   816 KB)
-      .data : 0xffffff8008b07000 - 0xffffff8008ba2400   (   621 KB)
-    vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
-              0xffffffbdc0000000 - 0xffffffbdc1000000   (    16 MB actual)
-    fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
-    PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
-    memory  : 0xffffffc000000000 - 0xffffffc040000000   (  1024 MB)
+    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
+    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
+      .text : 0xffff000008080000 - 0xffff0000087c0000   (  7424 KB)
+    .rodata : 0xffff0000087c0000 - 0xffff000008b30000   (  3520 KB)
+      .init : 0xffff000008b30000 - 0xffff000008c20000   (   960 KB)
+      .data : 0xffff000008c20000 - 0xffff000008cc1e00   (   648 KB)
+       .bss : 0xffff000008cc1e00 - 0xffff000008d02ac0   (   260 KB)
+    fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
+    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
+    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
+              0xffff7e0000000000 - 0xffff7e0001000000   (    16 MB actual)
+    memory  : 0xffff800000000000 - 0xffff800040000000   (  1024 MB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 64.
@@ -52,6 +53,7 @@
 EFI services will not be available.
 Brought up 1 CPUs
 SMP: Total of 1 processors activated.
+CPU features: detected feature: 32-bit EL0 Support
 CPU: All CPU(s) started at EL1
 alternatives: patching kernel code
 devtmpfs: initialized
@@ -60,13 +62,14 @@
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ ffffff800875a000, 1 data @ ffffff8008b0c000)
+vdso: 2 pages (1 code @ ffff0000087c6000, 1 data @ ffff000008c24000)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 39, base_baud = 0) is a PL011 rev1
 console [ttyAMA0] enabled
 HugeTLB registered 2 MB page size, pre-allocated 0 pages
+ACPI: Interpreter disabled.
 vgaarb: loaded
 SCSI subsystem initialized
 usbcore: registered new interface driver usbfs
@@ -80,6 +83,7 @@
 clocksource: Switched to clocksource arch_sys_counter
 VFS: Disk quotas dquot_6.6.0
 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+pnp: PnP ACPI: disabled
 NET: Registered protocol family 2
 TCP established hash table entries: 8192 (order: 4, 65536 bytes)
 TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
@@ -94,7 +98,7 @@
 kvm [1]: HYP mode not available
 futex hash table entries: 256 (order: 3, 32768 bytes)
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.884:1): initialized
+audit: type=2000 audit(0.588:1): initialized
 workingset: timestamp_bits=44 max_order=18 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -109,6 +113,7 @@
    IO 0x3eff0000..0x3effffff -> 0x00000000
   MEM 0x10000000..0x3efeffff -> 0x10000000
   MEM 0x8000000000..0xffffffffff -> 0x8000000000
+pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
 pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [bus 00-0f]
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
@@ -154,7 +159,7 @@
 Key type dns_resolver registered
 registered taskstats version 1
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2016-05-15 23:07:43 UTC (1463353663)
+rtc-pl031 9010000.pl031: setting system clock to 2016-05-31 14:40:21 UTC (1464705621)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
@@ -163,7 +168,7 @@
 EXT4-fs (vda2): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 254:2.
 devtmpfs: mounted
-Freeing unused kernel memory: 816K (ffffff8008a3b000 - ffffff8008b07000)
+Freeing unused kernel memory: 960K (ffff800000b30000 - ffff800000c20000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 bash-4.3# 
\ No newline at end of file
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2016-05-31 07:51:06.088550093 -0700
+++ /tmp/foob	2016-05-31 07:51:06.092550094 -0700
@@ -38,29 +38,29 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #################
-	 2.9 MiB/s
+	 #######################################
+	 3.2 MiB/s
 done
-Bytes transferred = 6919032 (699378 hex)
+Bytes transferred = 7238912 (6e7500 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.6 MiB/s
+	 2.8 MiB/s
 done
-Bytes transferred = 34894 (884e hex)
+Bytes transferred = 34956 (888c hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x699378 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x6e7500 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff4000, end 8ffff84d ... OK
+   Loading Device Tree to 8fff4000, end 8ffff88b ... OK
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.6.0-83646-g2dcd0af (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun May 15 16:04:39 PDT 2016
+Linux version 4.7.0-rc1-95164-g1a695a9 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue May 31 07:38:23 PDT 2016
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -69,20 +69,20 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c141b3c0, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c141bb40, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 12 pages/cpu @eefa3000 s19776 r8192 d21184 u49152
-pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
+percpu: Embedded 13 pages/cpu @eef9f000 s23808 r8192 d21248 u53248
+pcpu-alloc: s23808 r8192 d21248 u53248 alloc=13*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1995132K/2096128K available (9522K kernel code, 1141K rwdata, 4108K rodata, 2048K init, 341K bss, 35460K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1995116K/2096128K available (9529K kernel code, 1142K rwdata, 4476K rodata, 2048K init, 343K bss, 35476K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -90,10 +90,10 @@
     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc104fa34   (14623 kB)
+      .text : 0xc0208000 - 0xc10ad590   (14998 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc141d400   (1141 kB)
-       .bss : 0xc141f000 - 0xc1474518   ( 342 kB)
+      .data : 0xc1300000 - 0xc141dba0   (1143 kB)
+       .bss : 0xc141f000 - 0xc1474ca0   ( 344 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -155,10 +155,42 @@
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
 tps65090 2-0048: No cache defaults, reading back from HW
+TPS65090_RAILSDCDC1: supplied by vdd_ac_bat
+vdd_hdmi_5v0: supplied by vdd-sys-5v0
+TPS65090_RAILSDCDC2: supplied by vdd_ac_bat
+TPS65090_RAILSDCDC3: supplied by vdd_ac_bat
+TPS65090_RAILSFET1: supplied by vdd_ac_bat
+TPS65090_RAILSFET2: supplied by vdd_ac_bat
+TPS65090_RAILSFET3: supplied by vdd-sys-3v3
+TPS65090_RAILSFET4: supplied by vdd-sys-3v3
+TPS65090_RAILSFET5: supplied by vdd-sys-3v3
+TPS65090_RAILSFET6: supplied by vdd-sys-3v3
+TPS65090_RAILSFET7: supplied by vdd-sys-3v3
+TPS65090_RAILSLDO1: supplied by vdd_ac_bat
+TPS65090_RAILSLDO2: supplied by vdd_ac_bat
 genirq: Setting trigger mode 8 for irq 341 failed (irq_chip_set_type_parent+0x0/0x28)
 palmas 2-0058: Irq flag is 0x00000000
 palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
+SMPS12: supplied by vdd-ao
+SMPS3: supplied by vdd-ao
+SMPS457: supplied by vdd-sys-3v3
+SMPS8: supplied by vdd-sys-3v3
+SMPS9: supplied by vdd-sys-3v3
+sdhci-vdd-sd-slot: Bringing 2840000uV into 2800000-2800000uV
 sdhci-vdd-sd-slot: ramp_delay not set
+LDO1: supplied by vdd-sys-3v3
+LDO2: supplied by vdd-sys-3v3
+LDO3: supplied by vddio-1v8
+LDO4: supplied by vdd-sys-3v3
+LDO5: supplied by vdd_ac_bat
+LDO6: supplied by vdd-sys-3v3
+vdd-sensor-2v85: Bringing 2900000uV into 2850000-2850000uV
+LDO7: supplied by vdd-sys-3v3
+LDO8: supplied by vdd-ao
+vdd-rtc: Bringing 675000uV into 900000-900000uV
+LDO9: supplied by sdhci-vdd-sd-slot
+LDOLN: supplied by vdd-sys-5v0
+LDOUSB: supplied by vdd-sys-5v0
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
@@ -188,7 +220,6 @@
 io scheduler noop registered
 io scheduler deadline registered
 io scheduler cfq registered (default)
-vdd-lcd-bl: supplied by vdd_ac_bat
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
@@ -200,11 +231,6 @@
 STMicroelectronics ASC driver initialized
 [drm] Initialized drm 1.1.0 20060810
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
-vdd-ao: supplied by vdd_ac_bat
-vddio-1v8: supplied by vdd-ao
-avdd-dsi-csi: supplied by vddio-1v8
-vdd-sys-3v3: supplied by vdd_ac_bat
-avdd-lcd: supplied by vdd-sys-3v3
 brd: module loaded
 loop: module loaded
 m25p80 spi32766.0: w25q32dw (4096 Kbytes)
@@ -233,6 +259,30 @@
 ehci-exynos: EHCI EXYNOS driver
 ehci-atmel: EHCI Atmel driver
 tegra-ehci: Tegra EHCI driver
+------------[ cut here ]------------
+WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x1bc/0x228
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc1-95164-g1a695a9 #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+[<c030f9d0>] (unwind_backtrace) from [<c030b0c0>] (show_stack+0x10/0x14)
+[<c030b0c0>] (show_stack) from [<c05856e8>] (dump_stack+0x84/0xa4)
+[<c05856e8>] (dump_stack) from [<c0341b5c>] (__warn+0xd4/0x100)
+[<c0341b5c>] (__warn) from [<c0341ba8>] (warn_slowpath_null+0x20/0x28)
+[<c0341ba8>] (warn_slowpath_null) from [<c069fbd4>] (__of_reset_control_get+0x1bc/0x228)
+[<c069fbd4>] (__of_reset_control_get) from [<c0911ce8>] (tegra_ehci_probe+0x2d0/0x51c)
+[<c0911ce8>] (tegra_ehci_probe) from [<c0778efc>] (platform_drv_probe+0x50/0xb0)
+[<c0778efc>] (platform_drv_probe) from [<c0777860>] (driver_probe_device+0x1f4/0x2b0)
+[<c0777860>] (driver_probe_device) from [<c07779c8>] (__driver_attach+0xac/0xb0)
+[<c07779c8>] (__driver_attach) from [<c0775e74>] (bus_for_each_dev+0x54/0x88)
+[<c0775e74>] (bus_for_each_dev) from [<c0776e54>] (bus_add_driver+0xe8/0x1f4)
+[<c0776e54>] (bus_add_driver) from [<c07781e4>] (driver_register+0x78/0xf4)
+[<c07781e4>] (driver_register) from [<c0301e7c>] (do_one_initcall+0x3c/0x16c)
+[<c0301e7c>] (do_one_initcall) from [<c1100d80>] (kernel_init_freeable+0x120/0x1ec)
+[<c1100d80>] (kernel_init_freeable) from [<c0b5b4ec>] (kernel_init+0x8/0x118)
+[<c0b5b4ec>] (kernel_init) from [<c0307fb8>] (ret_from_fork+0x14/0x3c)
+---[ end trace b4d697396a56fe01 ]---
+tegra-ehci 7d008000.usb: can't get utmi-pads reset from the PHY
+tegra-ehci 7d008000.usb: continuing, but please update your DT
 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 ohci-pci: OHCI PCI platform driver
 ohci-platform: OHCI generic platform driver
@@ -248,7 +298,6 @@
 i2c /dev entries driver
 sbs-battery 0-000b: sbs_probe: Failed to get device status
 sbs-battery: probe of 0-000b failed with error -121
-vdd-sensor-2v85: supplied by vdd-sys-3v3
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 Synopsys Designware Multimedia Card Interface Driver
@@ -273,15 +322,15 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
-vdd-sys-5v0: supplied by vdd_ac_bat
+usb1_vbus: supplied by vdd-sys-5v0
+usb2_vbus: supplied by vdd-sys-5v0
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
-vdd_hdmi_5v0: supplied by vdd-sys-5v0
+mmc0: new high speed SDHC card at address aaaa
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
-mmc0: new high speed SDHC card at address aaaa
 mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
-mmc1: new high speed MMC card at address 0001
  mmcblk0: p1 p2 p3
+mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
@@ -290,7 +339,6 @@
 Console: switching to colour frame buffer device 240x75
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
-usb2_vbus: supplied by vdd-sys-5v0
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
@@ -298,7 +346,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-03-09 10:26:34 UTC (952597594)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-03-25 02:01:11 UTC (953949671)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -310,4 +358,4 @@
 Freeing unused kernel memory: 2048K (c1100000 - c1300000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.234285] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.535370] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2016-05-31 07:51:06.120550097 -0700
+++ /tmp/foob	2016-05-31 07:51:06.124550098 -0700
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -36,30 +36,30 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ######################################
-	 3.2 MiB/s
+	 #####################################################
+	 3.1 MiB/s
 done
-Bytes transferred = 5315976 (511d88 hex)
+Bytes transferred = 5538824 (548408 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3 MiB/s
+	 2.8 MiB/s
 done
-Bytes transferred = 34894 (884e hex)
+Bytes transferred = 34956 (888c hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x511d88 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x548408 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff4000, end 8ffff84d ... OK
+   Loading Device Tree to 8fff4000, end 8ffff88b ... OK
 
 Starting kernel ...
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.6.0-83646-g2dcd0af (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun May 15 16:04:30 PDT 2016
+Linux version 4.7.0-rc1-95164-g1a695a9 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue May 31 07:36:14 PDT 2016
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -69,20 +69,20 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0c5c440, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0c5bd40, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 12 pages/cpu @eefa2000 s19968 r8192 d20992 u49152
-pcpu-alloc: s19968 r8192 d20992 u49152 alloc=12*4096
+percpu: Embedded 13 pages/cpu @eef9e000 s23936 r8192 d21120 u53248
+pcpu-alloc: s23936 r8192 d21120 u53248 alloc=13*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2000996K/2096128K available (7412K kernel code, 375K rwdata, 2516K rodata, 1024K init, 362K bss, 29596K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 2000976K/2096128K available (7416K kernel code, 374K rwdata, 2820K rodata, 1024K init, 366K bss, 29616K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -90,10 +90,10 @@
     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc0ab22c4   (10921 kB)
+      .text : 0xc0008000 - 0xc0aff0a4   (11229 kB)
       .init : 0xc0b00000 - 0xc0c00000   (1024 kB)
-      .data : 0xc0c00000 - 0xc0c5dfc0   ( 376 kB)
-       .bss : 0xc0c5f000 - 0xc0cb9a04   ( 363 kB)
+      .data : 0xc0c00000 - 0xc0c5d8c0   ( 375 kB)
+       .bss : 0xc0c5f000 - 0xc0cbab18   ( 367 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
 NR_IRQS:16 nr_irqs:16 16
@@ -151,10 +151,42 @@
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
 tps65090 2-0048: No cache defaults, reading back from HW
+TPS65090_RAILSDCDC1: supplied by vdd_ac_bat
+vdd_hdmi_5v0: supplied by vdd-sys-5v0
+TPS65090_RAILSDCDC2: supplied by vdd_ac_bat
+TPS65090_RAILSDCDC3: supplied by vdd_ac_bat
+TPS65090_RAILSFET1: supplied by vdd_ac_bat
+TPS65090_RAILSFET2: supplied by vdd_ac_bat
+TPS65090_RAILSFET3: supplied by vdd-sys-3v3
+TPS65090_RAILSFET4: supplied by vdd-sys-3v3
+TPS65090_RAILSFET5: supplied by vdd-sys-3v3
+TPS65090_RAILSFET6: supplied by vdd-sys-3v3
+TPS65090_RAILSFET7: supplied by vdd-sys-3v3
+TPS65090_RAILSLDO1: supplied by vdd_ac_bat
+TPS65090_RAILSLDO2: supplied by vdd_ac_bat
 genirq: Setting trigger mode 8 for irq 341 failed (irq_chip_set_type_parent+0x0/0x28)
 palmas 2-0058: Irq flag is 0x00000000
 palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
+SMPS12: supplied by vdd-ao
+SMPS3: supplied by vdd-ao
+SMPS457: supplied by vdd-sys-3v3
+SMPS8: supplied by vdd-sys-3v3
+SMPS9: supplied by vdd-sys-3v3
+sdhci-vdd-sd-slot: Bringing 2840000uV into 2800000-2800000uV
 sdhci-vdd-sd-slot: ramp_delay not set
+LDO1: supplied by vdd-sys-3v3
+LDO2: supplied by vdd-sys-3v3
+LDO3: supplied by vddio-1v8
+LDO4: supplied by vdd-sys-3v3
+LDO5: supplied by vdd_ac_bat
+LDO6: supplied by vdd-sys-3v3
+vdd-sensor-2v85: Bringing 2900000uV into 2850000-2850000uV
+LDO7: supplied by vdd-sys-3v3
+LDO8: supplied by vdd-ao
+vdd-rtc: Bringing 675000uV into 900000-900000uV
+LDO9: supplied by sdhci-vdd-sd-slot
+LDOLN: supplied by vdd-sys-5v0
+LDOUSB: supplied by vdd-sys-5v0
 Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
@@ -187,7 +219,6 @@
 Key type id_legacy registered
 bounce: pool size: 64 pages
 io scheduler noop registered (default)
-vdd-lcd-bl: supplied by vdd_ac_bat
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
@@ -199,11 +230,6 @@
 bootconsole [earlycon0] disabled
 [drm] Initialized drm 1.1.0 20060810
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
-vdd-ao: supplied by vdd_ac_bat
-vddio-1v8: supplied by vdd-ao
-avdd-dsi-csi: supplied by vddio-1v8
-vdd-sys-3v3: supplied by vdd_ac_bat
-avdd-lcd: supplied by vdd-sys-3v3
 loop: module loaded
 m25p80 spi32766.0: w25q32dw (4096 Kbytes)
 CAN device driver interface
@@ -223,6 +249,30 @@
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-pci: EHCI PCI platform driver
 tegra-ehci: Tegra EHCI driver
+------------[ cut here ]------------
+WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x1b4/0x218
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc1-95164-g1a695a9 #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+[<c010f1e8>] (unwind_backtrace) from [<c010a864>] (show_stack+0x10/0x14)
+[<c010a864>] (show_stack) from [<c033d174>] (dump_stack+0x84/0xa4)
+[<c033d174>] (dump_stack) from [<c011f2f4>] (__warn+0xd4/0x100)
+[<c011f2f4>] (__warn) from [<c011f340>] (warn_slowpath_null+0x20/0x28)
+[<c011f340>] (warn_slowpath_null) from [<c03c06e0>] (__of_reset_control_get+0x1b4/0x218)
+[<c03c06e0>] (__of_reset_control_get) from [<c0513c34>] (tegra_ehci_probe+0x2c8/0x514)
+[<c0513c34>] (tegra_ehci_probe) from [<c0441300>] (platform_drv_probe+0x50/0xb0)
+[<c0441300>] (platform_drv_probe) from [<c043fd2c>] (driver_probe_device+0x1f4/0x2b0)
+[<c043fd2c>] (driver_probe_device) from [<c043fe94>] (__driver_attach+0xac/0xb0)
+[<c043fe94>] (__driver_attach) from [<c043e350>] (bus_for_each_dev+0x54/0x88)
+[<c043e350>] (bus_for_each_dev) from [<c043f320>] (bus_add_driver+0xe8/0x1f4)
+[<c043f320>] (bus_add_driver) from [<c0440690>] (driver_register+0x78/0xf4)
+[<c0440690>] (driver_register) from [<c010179c>] (do_one_initcall+0x3c/0x16c)
+[<c010179c>] (do_one_initcall) from [<c0b00d94>] (kernel_init_freeable+0x11c/0x1e8)
+[<c0b00d94>] (kernel_init_freeable) from [<c07f1574>] (kernel_init+0x8/0x118)
+[<c07f1574>] (kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c)
+---[ end trace 48c9abe16ad973bb ]---
+tegra-ehci 7d008000.usb: can't get utmi-pads reset from the PHY
+tegra-ehci 7d008000.usb: continuing, but please update your DT
 usbcore: registered new interface driver cdc_acm
 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 usbcore: registered new interface driver cdc_wdm
@@ -237,7 +287,7 @@
 gspca_main: v2.14.0 registered
 sbs-battery 0-000b: sbs_probe: Failed to get device status
 sbs-battery: probe of 0-000b failed with error -121
-vdd-sensor-2v85: supplied by vdd-sys-3v3
+tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0)
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
@@ -251,13 +301,13 @@
 usbhid: USB HID core driver
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
-mmc0: new high speed SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
+mmc0: new high speed SDHC card at address aaaa
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
- mmcblk0: p1 p2 p3
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
+mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
+ mmcblk0: p1 p2 p3
 tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
 tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
 input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound/sound/card0/input0
@@ -279,15 +329,14 @@
 Bluetooth: HIDP socket layer initialized
 Key type dns_resolver registered
 Registering SWP/SWPB emulation handler
-vdd-sys-5v0: supplied by vdd_ac_bat
+usb1_vbus: supplied by vdd-sys-5v0
+usb2_vbus: supplied by vdd-sys-5v0
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
-vdd_hdmi_5v0: supplied by vdd-sys-5v0
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 Console: switching to colour frame buffer device 240x75
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
-usb2_vbus: supplied by vdd-sys-5v0
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
@@ -295,7 +344,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-03-09 10:24:03 UTC (952597443)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-03-25 01:56:43 UTC (953949403)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -309,4 +358,4 @@
 Freeing unused kernel memory: 1024K (c0b00000 - c0c00000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.595282] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    5.422600] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2016-05-31 07:51:06.136550098 -0700
+++ /tmp/foob	2016-05-31 07:51:06.140550099 -0700
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -33,29 +33,29 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #################
-	 4 MiB/s
+	 #######################################
+	 3.9 MiB/s
 done
-Bytes transferred = 6919032 (699378 hex)
+Bytes transferred = 7238912 (6e7500 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.6 MiB/s
+	 3.7 MiB/s
 done
-Bytes transferred = 64138 (fa8a hex)
+Bytes transferred = 66737 (104b1 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x699378 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x6e7500 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
-   Using Device Tree in place at 83000000, end 83012a89
+   Using Device Tree in place at 83000000, end 830134b0
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.6.0-83646-g2dcd0af (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun May 15 16:04:39 PDT 2016
+Linux version 4.7.0-rc1-95164-g1a695a9 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue May 31 07:38:23 PDT 2016
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -64,20 +64,20 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c141b3c0, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c141bb40, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 12 pages/cpu @eef8f000 s19776 r8192 d21184 u49152
-pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
+percpu: Embedded 13 pages/cpu @eef89000 s23808 r8192 d21248 u53248
+pcpu-alloc: s23808 r8192 d21248 u53248 alloc=13*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1995024K/2096128K available (9522K kernel code, 1141K rwdata, 4108K rodata, 2048K init, 341K bss, 35568K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1994996K/2096128K available (9529K kernel code, 1142K rwdata, 4476K rodata, 2048K init, 343K bss, 35596K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -85,10 +85,10 @@
     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc104fa34   (14623 kB)
+      .text : 0xc0208000 - 0xc10ad590   (14998 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc141d400   (1141 kB)
-       .bss : 0xc141f000 - 0xc1474518   ( 342 kB)
+      .data : 0xc1300000 - 0xc141dba0   (1143 kB)
+       .bss : 0xc141f000 - 0xc1474ca0   ( 344 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -134,6 +134,8 @@
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 8 bytes.
 Serial: AMBA PL011 UART driver
++5V_SYS: supplied by +VDD_MUX
++3.3V_SYS: supplied by +VDD_MUX
 +USB0_VBUS_SW: Failed to request enable GPIO108: -517
 reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
 +5V_USB_HS: Failed to request enable GPIO109: -517
@@ -182,6 +184,9 @@
 io scheduler noop registered
 io scheduler deadline registered
 io scheduler cfq registered (default)
+usb2-0 supply vbus not found, using dummy regulator
+usb2-1 supply vbus not found, using dummy regulator
+tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
@@ -193,16 +198,32 @@
 SuperH (H)SCI(F) driver initialized
 msm_serial: driver initialized
 STMicroelectronics ASC driver initialized
+serial-tegra serial@70006000: failed to get alias id, errno -19
+serial-tegra serial@70006040: failed to get alias id, errno -19
 [drm] Initialized drm 1.1.0 20060810
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 brd: module loaded
 loop: module loaded
 at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
 as3722 4-0040: AS3722 with revision 0x1 found
-+5V_SYS: supplied by +VDD_MUX
-+1.05V_RUN: supplied by +5V_SYS
-tegra-ahci 70027000.sata: Failed to get supply 'hvdd': -517
-tegra-ahci 70027000.sata: Failed to get regulators
+as3722-sd2: supplied by +5V_SYS
+as3722-sd3: supplied by +5V_SYS
++1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
+as3722-sd4: supplied by +5V_SYS
+as3722-sd5: supplied by +5V_SYS
+as3722-ldo0: supplied by +1.35V_LP0(sd2)
++1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV
+as3722-ldo2: supplied by +1.8V_VDDIO
+as3722-ldo3: supplied by +3.3V_SYS
++1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV
+as3722-ldo4: supplied by +3.3V_SYS
++2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV
+as3722-ldo5: supplied by +1.8V_VDDIO
++1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV
++VDDIO_SDMMC3: bypassed regulator has no supply!
++VDDIO_SDMMC3: failed to get the current voltage(-517)
+as3722-regulator as3722-regulator: regulator 13 register failed -517
+tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
 m25p80 spi32765.0: w25q32dw (4096 Kbytes)
 libphy: Fixed MDIO Bus: probed
 CAN device driver interface
@@ -230,9 +251,33 @@
 ehci-exynos: EHCI EXYNOS driver
 ehci-atmel: EHCI Atmel driver
 tegra-ehci: Tegra EHCI driver
+------------[ cut here ]------------
+WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x1bc/0x228
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc1-95164-g1a695a9 #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+[<c030f9d0>] (unwind_backtrace) from [<c030b0c0>] (show_stack+0x10/0x14)
+[<c030b0c0>] (show_stack) from [<c05856e8>] (dump_stack+0x84/0xa4)
+[<c05856e8>] (dump_stack) from [<c0341b5c>] (__warn+0xd4/0x100)
+[<c0341b5c>] (__warn) from [<c0341ba8>] (warn_slowpath_null+0x20/0x28)
+[<c0341ba8>] (warn_slowpath_null) from [<c069fbd4>] (__of_reset_control_get+0x1bc/0x228)
+[<c069fbd4>] (__of_reset_control_get) from [<c0911ce8>] (tegra_ehci_probe+0x2d0/0x51c)
+[<c0911ce8>] (tegra_ehci_probe) from [<c0778efc>] (platform_drv_probe+0x50/0xb0)
+[<c0778efc>] (platform_drv_probe) from [<c0777860>] (driver_probe_device+0x1f4/0x2b0)
+[<c0777860>] (driver_probe_device) from [<c07779c8>] (__driver_attach+0xac/0xb0)
+[<c07779c8>] (__driver_attach) from [<c0775e74>] (bus_for_each_dev+0x54/0x88)
+[<c0775e74>] (bus_for_each_dev) from [<c0776e54>] (bus_add_driver+0xe8/0x1f4)
+[<c0776e54>] (bus_add_driver) from [<c07781e4>] (driver_register+0x78/0xf4)
+[<c07781e4>] (driver_register) from [<c0301e7c>] (do_one_initcall+0x3c/0x16c)
+[<c0301e7c>] (do_one_initcall) from [<c1100d80>] (kernel_init_freeable+0x120/0x1ec)
+[<c1100d80>] (kernel_init_freeable) from [<c0b5b4ec>] (kernel_init+0x8/0x118)
+[<c0b5b4ec>] (kernel_init) from [<c0307fb8>] (ret_from_fork+0x14/0x3c)
+---[ end trace 012e00ea4f6cdce6 ]---
+tegra-ehci 7d004000.usb: can't get utmi-pads reset from the PHY
+tegra-ehci 7d004000.usb: continuing, but please update your DT
 tegra-ehci 7d004000.usb: EHCI Host Controller
 tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d004000.usb: irq 350, io mem 0x7d004000
+tegra-ehci 7d004000.usb: irq 352, io mem 0x7d004000
 tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
@@ -246,7 +291,7 @@
 usbcore: registered new interface driver usb-storage
 mousedev: PS/2 mouse device common for all mice
 as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
-as3722-rtc as3722-rtc: RTC interrupt 373
+as3722-rtc as3722-rtc: RTC interrupt 375
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 i2c /dev entries driver
@@ -264,6 +309,7 @@
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
+tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
 NET: Registered protocol family 10
 sit: IPv6 over IPv4 tunneling driver
 NET: Registered protocol family 17
@@ -275,18 +321,60 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
-tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
-+3.3V_SYS: supplied by +VDD_MUX
++3.3V_RUN: supplied by +3.3V_SYS
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
++USB0_VBUS_SW: supplied by +5V_SYS
++5V_USB_HS: supplied by +5V_SYS
 +3.3V_LP0: supplied by +3.3V_SYS
-+1.35V_LP0(sd2): supplied by +5V_SYS
-+1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
-tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
++5V_HDMI_CON: supplied by +5V_SYS
++5V_SATA: supplied by +5V_SYS
++12V_SATA: supplied by +VDD_MUX
+usb2-0 supply vbus not found, using dummy regulator
+usb2-1 supply vbus not found, using dummy regulator
+usb3-0 supply vbus not found, using dummy regulator
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+as3722-sd2: supplied by +5V_SYS
+as3722-sd3: supplied by +5V_SYS
+as3722-sd4: supplied by +5V_SYS
++1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
+as3722-sd5: supplied by +5V_SYS
 mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
- mmcblk0: p1
+as3722-ldo0: supplied by +1.35V_LP0(sd2)
+as3722-ldo1: supplied by +3.3V_RUN
+as3722-ldo2: supplied by +1.8V_VDDIO
+as3722-ldo3: supplied by +3.3V_SYS
+as3722-ldo4: supplied by +3.3V_SYS
+as3722-ldo5: supplied by +1.8V_VDDIO
+as3722-ldo6: supplied by +3.3V_RUN
+as3722-ldo7: supplied by +1.8V_VDDIO
++1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
+as3722-ldo9: supplied by +5V_SYS
++3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
+as3722-ldo10: supplied by +5V_SYS
++2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
+as3722-ldo11: supplied by +3.3V_RUN
++1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
+tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
+tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
+scsi host0: tegra-ahci
+scsi host1: tegra-ahci
+ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 343
+ata2: DUMMY
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci 7d008000.usb: irq 353, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc1: Unknown controller version (3). You may experience problems.
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
 tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
@@ -333,52 +421,41 @@
 pcieport 0000:00:01.0: enabling device (0140 -> 0142)
 pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
 pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
-pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
+pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
 pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
 pcieport 0000:00:02.0: enabling device (0140 -> 0143)
 pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
 pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
-pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
+pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0a1c000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 391
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0a48000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 393
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
-+5V_HDMI_CON: supplied by +5V_SYS
-+1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
-+3.3V_RUN: supplied by +3.3V_SYS
-+3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
-tegra-hdmi 54280000.hdmi: cannot set audio to 44100 at 297000000 pclk
-Console: switching to colour frame buffer device 512x135
+drm drm: No connectors reported connected with modes
+[drm] Cannot find any crtc or sizes - going 1024x768
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
+ata1: SATA link down (SStatus 0 SControl 300)
+ mmcblk1: p1 p2 p3
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+Console: switching to colour frame buffer device 128x48
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
+ mmcblk0: p1
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
-+5V_SATA: supplied by +5V_SYS
-+12V_SATA: supplied by +VDD_MUX
-tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
-tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
-scsi host0: tegra-ahci
-scsi host1: tegra-ahci
-ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 343
-ata2: DUMMY
-+5V_USB_HS: supplied by +5V_SYS
-tegra-ehci 7d008000.usb: EHCI Host Controller
-tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci 7d008000.usb: irq 351, io mem 0x7d008000
-tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 1 port detected
-cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
+of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
-mmc1: Unknown controller version (3). You may experience problems.
-+VDDIO_SDMMC3: supplied by +3.3V_RUN
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
+cpu cpu1: cpufreq_init: failed to get clk: -2
+cpu cpu2: cpufreq_init: failed to get clk: -2
+cpu cpu3: cpufreq_init: failed to get clk: -2
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:04 UTC (946684924)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:05:33 UTC (946685133)
++USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
@@ -386,17 +463,12 @@
 +3.3V_RUN_TOUCH: disabling
 +2.8V_RUN_CAM_AF: disabling
 +1.8V_RUN_VPP_FUSE: disabling
-+USB0_VBUS_SW: disabling
-ata1: SATA link down (SStatus 0 SControl 300)
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
+VFS: Mounted root (ext3 filesystem) on device 179:17.
 devtmpfs: mounted
 Freeing unused kernel memory: 2048K (c1100000 - c1300000)
-mmc1: new high speed SDHC card at address aaaa
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
- mmcblk1: p1 p2 p3
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2016-05-31 07:51:06.168550102 -0700
+++ /tmp/foob	2016-05-31 07:51:06.168550102 -0700
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -31,30 +31,30 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ######################################
+	 #####################################################
 	 4 MiB/s
 done
-Bytes transferred = 5315976 (511d88 hex)
+Bytes transferred = 5538824 (548408 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.8 MiB/s
+	 4 MiB/s
 done
-Bytes transferred = 64138 (fa8a hex)
+Bytes transferred = 66737 (104b1 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x511d88 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x548408 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
-   Using Device Tree in place at 83000000, end 83012a89
+   Using Device Tree in place at 83000000, end 830134b0
 
 Starting kernel ...
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.6.0-83646-g2dcd0af (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun May 15 16:04:30 PDT 2016
+Linux version 4.7.0-rc1-95164-g1a695a9 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue May 31 07:36:14 PDT 2016
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -64,20 +64,20 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0c5c440, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0c5bd40, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 12 pages/cpu @eef8e000 s19968 r8192 d20992 u49152
-pcpu-alloc: s19968 r8192 d20992 u49152 alloc=12*4096
+percpu: Embedded 13 pages/cpu @eef88000 s23936 r8192 d21120 u53248
+pcpu-alloc: s23936 r8192 d21120 u53248 alloc=13*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2000888K/2096128K available (7412K kernel code, 375K rwdata, 2516K rodata, 1024K init, 362K bss, 29704K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 2000856K/2096128K available (7416K kernel code, 374K rwdata, 2820K rodata, 1024K init, 366K bss, 29736K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -85,10 +85,10 @@
     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc0ab22c4   (10921 kB)
+      .text : 0xc0008000 - 0xc0aff0a4   (11229 kB)
       .init : 0xc0b00000 - 0xc0c00000   (1024 kB)
-      .data : 0xc0c00000 - 0xc0c5dfc0   ( 376 kB)
-       .bss : 0xc0c5f000 - 0xc0cb9a04   ( 363 kB)
+      .data : 0xc0c00000 - 0xc0c5d8c0   ( 375 kB)
+       .bss : 0xc0c5f000 - 0xc0cbab18   ( 367 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
 NR_IRQS:16 nr_irqs:16 16
@@ -130,6 +130,8 @@
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 8 bytes.
++5V_SYS: supplied by +VDD_MUX
++3.3V_SYS: supplied by +VDD_MUX
 +USB0_VBUS_SW: Failed to request enable GPIO108: -517
 reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
 +5V_USB_HS: Failed to request enable GPIO109: -517
@@ -181,6 +183,9 @@
 Key type id_legacy registered
 bounce: pool size: 64 pages
 io scheduler noop registered (default)
+usb2-0 supply vbus not found, using dummy regulator
+usb2-1 supply vbus not found, using dummy regulator
+tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
@@ -192,15 +197,31 @@
 console [ttyS0] enabled
 bootconsole [earlycon0] disabled
 bootconsole [earlycon0] disabled
+serial-tegra serial@70006000: failed to get alias id, errno -19
+serial-tegra serial@70006040: failed to get alias id, errno -19
 [drm] Initialized drm 1.1.0 20060810
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 loop: module loaded
 at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
 as3722 4-0040: AS3722 with revision 0x1 found
-+5V_SYS: supplied by +VDD_MUX
-+1.05V_RUN: supplied by +5V_SYS
-tegra-ahci 70027000.sata: Failed to get supply 'hvdd': -517
-tegra-ahci 70027000.sata: Failed to get regulators
+as3722-sd2: supplied by +5V_SYS
+as3722-sd3: supplied by +5V_SYS
++1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
+as3722-sd4: supplied by +5V_SYS
+as3722-sd5: supplied by +5V_SYS
+as3722-ldo0: supplied by +1.35V_LP0(sd2)
++1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV
+as3722-ldo2: supplied by +1.8V_VDDIO
+as3722-ldo3: supplied by +3.3V_SYS
++1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV
+as3722-ldo4: supplied by +3.3V_SYS
++2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV
+as3722-ldo5: supplied by +1.8V_VDDIO
++1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV
++VDDIO_SDMMC3: bypassed regulator has no supply!
++VDDIO_SDMMC3: failed to get the current voltage(-517)
+as3722-regulator as3722-regulator: regulator 13 register failed -517
+tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
 m25p80 spi32765.0: w25q32dw (4096 Kbytes)
 CAN device driver interface
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
@@ -220,9 +241,33 @@
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-pci: EHCI PCI platform driver
 tegra-ehci: Tegra EHCI driver
+------------[ cut here ]------------
+WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x1b4/0x218
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc1-95164-g1a695a9 #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+[<c010f1e8>] (unwind_backtrace) from [<c010a864>] (show_stack+0x10/0x14)
+[<c010a864>] (show_stack) from [<c033d174>] (dump_stack+0x84/0xa4)
+[<c033d174>] (dump_stack) from [<c011f2f4>] (__warn+0xd4/0x100)
+[<c011f2f4>] (__warn) from [<c011f340>] (warn_slowpath_null+0x20/0x28)
+[<c011f340>] (warn_slowpath_null) from [<c03c06e0>] (__of_reset_control_get+0x1b4/0x218)
+[<c03c06e0>] (__of_reset_control_get) from [<c0513c34>] (tegra_ehci_probe+0x2c8/0x514)
+[<c0513c34>] (tegra_ehci_probe) from [<c0441300>] (platform_drv_probe+0x50/0xb0)
+[<c0441300>] (platform_drv_probe) from [<c043fd2c>] (driver_probe_device+0x1f4/0x2b0)
+[<c043fd2c>] (driver_probe_device) from [<c043fe94>] (__driver_attach+0xac/0xb0)
+[<c043fe94>] (__driver_attach) from [<c043e350>] (bus_for_each_dev+0x54/0x88)
+[<c043e350>] (bus_for_each_dev) from [<c043f320>] (bus_add_driver+0xe8/0x1f4)
+[<c043f320>] (bus_add_driver) from [<c0440690>] (driver_register+0x78/0xf4)
+[<c0440690>] (driver_register) from [<c010179c>] (do_one_initcall+0x3c/0x16c)
+[<c010179c>] (do_one_initcall) from [<c0b00d94>] (kernel_init_freeable+0x11c/0x1e8)
+[<c0b00d94>] (kernel_init_freeable) from [<c07f1574>] (kernel_init+0x8/0x118)
+[<c07f1574>] (kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c)
+---[ end trace c48078c3e4070caa ]---
+tegra-ehci 7d004000.usb: can't get utmi-pads reset from the PHY
+tegra-ehci 7d004000.usb: continuing, but please update your DT
 tegra-ehci 7d004000.usb: EHCI Host Controller
 tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d004000.usb: irq 350, io mem 0x7d004000
+tegra-ehci 7d004000.usb: irq 352, io mem 0x7d004000
 tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
@@ -232,7 +277,7 @@
 usbcore: registered new interface driver usb-storage
 mousedev: PS/2 mouse device common for all mice
 as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
-as3722-rtc as3722-rtc: RTC interrupt 373
+as3722-rtc as3722-rtc: RTC interrupt 375
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 i2c /dev entries driver
@@ -240,6 +285,7 @@
 USB Video Class driver (1.1.1)
 gspca_main: v2.14.0 registered
 0-004c supply vcc not found, using dummy regulator
+tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0)
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
@@ -251,6 +297,7 @@
 mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
+tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
@@ -283,13 +330,73 @@
 Bluetooth: HIDP socket layer initialized
 Key type dns_resolver registered
 Registering SWP/SWPB emulation handler
-tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
-+3.3V_SYS: supplied by +VDD_MUX
++3.3V_RUN: supplied by +3.3V_SYS
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
++USB0_VBUS_SW: supplied by +5V_SYS
++5V_USB_HS: supplied by +5V_SYS
 +3.3V_LP0: supplied by +3.3V_SYS
-+1.35V_LP0(sd2): supplied by +5V_SYS
-+1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
++5V_HDMI_CON: supplied by +5V_SYS
++5V_SATA: supplied by +5V_SYS
++12V_SATA: supplied by +VDD_MUX
+usb2-0 supply vbus not found, using dummy regulator
+usb2-1 supply vbus not found, using dummy regulator
+usb3-0 supply vbus not found, using dummy regulator
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+as3722-sd2: supplied by +5V_SYS
+as3722-sd3: supplied by +5V_SYS
+as3722-sd4: supplied by +5V_SYS
++1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
+as3722-sd5: supplied by +5V_SYS
+as3722-ldo0: supplied by +1.35V_LP0(sd2)
+as3722-ldo1: supplied by +3.3V_RUN
+as3722-ldo2: supplied by +1.8V_VDDIO
+as3722-ldo3: supplied by +3.3V_SYS
+as3722-ldo4: supplied by +3.3V_SYS
+as3722-ldo5: supplied by +1.8V_VDDIO
+as3722-ldo6: supplied by +3.3V_RUN
+as3722-ldo7: supplied by +1.8V_VDDIO
++1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
+as3722-ldo9: supplied by +5V_SYS
++3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
+as3722-ldo10: supplied by +5V_SYS
++2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
+as3722-ldo11: supplied by +3.3V_RUN
++1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
+tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
+tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
+scsi host0: tegra-ahci
+scsi host1: tegra-ahci
+ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 343
+ata2: DUMMY
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci 7d008000.usb: irq 353, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC
+tegra-xusb 70090000.usb: xHCI Host Controller
+tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 3
+tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010
+tegra-xusb 70090000.usb: irq 345, io mem 0x70090000
+hub 3-0:1.0: USB hub found
+hub 3-0:1.0: 6 ports detected
+tegra-xusb 70090000.usb: xHCI Host Controller
+tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 4
+usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
+hub 4-0:1.0: USB hub found
+hub 4-0:1.0: 2 ports detected
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc1: Unknown controller version (3). You may experience problems.
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
+ata1: SATA link down (SStatus 0 SControl 300)
 tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
 tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
@@ -315,13 +422,16 @@
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 pci 0000:02:00.0: supports D1 D2
 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+mmc1: new high speed SDHC card at address aaaa
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
 pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff]
 pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
 pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
 pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit]
+ mmcblk1: p1 p2 p3
 pci 0000:00:01.0: PCI bridge to [bus 01]
 pci 0000:00:01.0:   bridge window [mem 0x13000000-0x130fffff]
 pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
@@ -335,52 +445,31 @@
 pcieport 0000:00:01.0: enabling device (0140 -> 0142)
 pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
 pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
-pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
+pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
 pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
 pcieport 0000:00:02.0: enabling device (0140 -> 0143)
 pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
 pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
-pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
+pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0952000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 391
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf09fc000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 393
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
-+5V_HDMI_CON: supplied by +5V_SYS
-+1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
-+3.3V_RUN: supplied by +3.3V_SYS
-+3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 tegra-hdmi 54280000.hdmi: cannot set audio to 44100 at 297000000 pclk
 Console: switching to colour frame buffer device 512x135
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
-+5V_SATA: supplied by +5V_SYS
-+12V_SATA: supplied by +VDD_MUX
-tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
-tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
-scsi host0: tegra-ahci
-scsi host1: tegra-ahci
-ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 343
-ata2: DUMMY
-+5V_USB_HS: supplied by +5V_SYS
-tegra-ehci 7d008000.usb: EHCI Host Controller
-tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci 7d008000.usb: irq 351, io mem 0x7d008000
-tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 1 port detected
-cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
+of: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
-mmc1: Unknown controller version (3). You may experience problems.
-+VDDIO_SDMMC3: supplied by +3.3V_RUN
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
+cpu cpu1: cpufreq_init: failed to get clk: -2
+cpu cpu2: cpufreq_init: failed to get clk: -2
+cpu cpu3: cpufreq_init: failed to get clk: -2
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:12 UTC (946684812)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:03:40 UTC (946685020)
++USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
@@ -388,20 +477,15 @@
 +3.3V_RUN_TOUCH: disabling
 +2.8V_RUN_CAM_AF: disabling
 +1.8V_RUN_VPP_FUSE: disabling
-+USB0_VBUS_SW: disabling
 ALSA device list:
   #0: tegra-hda at 0x70038000 irq 344
   #1: NVIDIA Tegra Jetson TK1
-ata1: SATA link down (SStatus 0 SControl 300)
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K (c0b00000 - c0c00000)
-mmc1: new high speed SDHC card at address aaaa
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
- mmcblk1: p1 p2 p3
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	1969-12-31 16:00:00.000000000 -0800
+++ /tmp/foob	2016-05-31 07:51:06.172550103 -0700
@@ -0,0 +1,378 @@
+
+
+U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01)
+
+TEGRA124
+Model: Acer Chromebook 13 CB5-311
+DRAM:  4 GiB
+:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+MMC init failed
+Using default environment
+
+In:    serial
+Out:   serial
+Err:   serial
+Net:   Net Initialization Skipped
+No ethernet found.
+Hit any key to stop autoboot:  2  0 
+Tegra124 (Nyan-big) # 
+Tegra124 (Nyan-big) # usb start
+starting USB...
+USB0:   USB EHCI 1.10
+scanning bus 0 for devices... 2 USB Device(s) found
+USB1:   USB EHCI 1.10
+scanning bus 1 for devices... 2 USB Device(s) found
+       scanning usb for storage devices... 1 Storage Device(s) found
+       scanning usb for ethernet devices... 
+Warning: asx0 using MAC address from net device
+1 Ethernet Device(s) found
+Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash'
+Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+Filename 'zImage.multi_v7_defconfig'.
+Load address: 0x82000000
+Loading: *#################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #######################################
+	 3.2 MiB/s
+done
+Bytes transferred = 7238912 (6e7500 hex)
+Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+Filename 'tegra124-nyan-big.dtb'.
+Load address: 0x83000000
+Loading: *#####
+	 2.8 MiB/s
+done
+Bytes transferred = 66901 (10555 hex)
+Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
+Kernel image @ 0x82000000 [ 0x000000 - 0x6e7500 ]
+## Flattened Device Tree blob at 83000000
+   Booting using the fdt blob at 0x83000000
+   Using Device Tree in place at 83000000, end 83013554
+
+Starting kernel ...
+
+Booting Linux on physical CPU 0x0
+Linux version 4.7.0-rc1-95164-g1a695a9 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue May 31 07:38:23 PDT 2016
+CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
+CPU: div instructions available: patching division code
+CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
+Machine model: Acer Chromebook 13 CB5-311
+Ignoring memory range 0x100000000 - 0x17ffff000
+debug: ignoring loglevel setting.
+cma: Reserved 64 MiB at 0xfb800000
+Memory policy: Data cache writealloc
+On node 0 totalpages: 524287
+free_area_init_node: node 0, pgdat c141bb40, node_mem_map eeff8000
+  DMA zone: 1536 pages used for memmap
+  DMA zone: 0 pages reserved
+  DMA zone: 196608 pages, LIFO batch:31
+  HighMem zone: 327679 pages, LIFO batch:31
+percpu: Embedded 13 pages/cpu @eef89000 s23808 r8192 d21248 u53248
+pcpu-alloc: s23808 r8192 d21248 u53248 alloc=13*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522751
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
+PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 1996016K/2097148K available (9529K kernel code, 1142K rwdata, 4476K rodata, 2048K init, 343K bss, 35596K reserved, 65536K cma-reserved, 1245180K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0208000 - 0xc10ad590   (14998 kB)
+      .init : 0xc1100000 - 0xc1300000   (2048 kB)
+      .data : 0xc1300000 - 0xc141dba0   (1143 kB)
+       .bss : 0xc141f000 - 0xc1474ca0   ( 344 kB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+Hierarchical RCU implementation.
+	Build-time adjustment of leaf fanout to 32.
+	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
+RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
+NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000
+Tegra clk 127: register failed with -17
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+Switching to timer-based delay loop, resolution 1000ns
+Architected cp15 timer(s) running at 12.00MHz (virt).
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
+Switching to timer-based delay loop, resolution 83ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+CPU: Testing write buffer coherency: ok
+/cpus/cpu@0 missing clock-frequency property
+/cpus/cpu@1 missing clock-frequency property
+/cpus/cpu@2 missing clock-frequency property
+/cpus/cpu@3 missing clock-frequency property
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x80300000 - 0x80300098
+Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+Brought up 4 CPUs
+SMP: Total of 4 processors activated (96.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 8 bytes.
+Serial: AMBA PL011 UART driver
+tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered
++5V_SYS: supplied by +VDD_MUX
++3.3V_SYS: supplied by +VDD_MUX
++VDD_LED: Failed to request enable GPIO122: -517
+reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
++5V_VDD_TS_SW: Failed to request enable GPIO81: -517
+reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517
++5V_USB_HS: Failed to request enable GPIO108: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
++5V_USB_SS: Failed to request enable GPIO109: -517
+reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
++1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517
+reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
++5V_HDMI_CON: Failed to request enable GPIO86: -517
+reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+EDAC MC: Ver: 3.0.0
+tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT
+tegra-emc: probe of 7001b000.emc failed with error -2
+clocksource: Switched to clocksource arch_sys_counter
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+workingset: timestamp_bits=28 max_order=19 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+ntfs: driver 2.1.32 [Flags: R/O].
+bounce: pool size: 64 pages
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
+io scheduler noop registered
+io scheduler deadline registered
+io scheduler cfq registered (default)
+tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517
+tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+console [ttyS0] disabled
+70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
+STMicroelectronics ASC driver initialized
+[drm] Initialized drm 1.1.0 20060810
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517
+panel supply power not found, using dummy regulator
+brd: module loaded
+loop: module loaded
+as3722 4-0040: AS3722 with revision 0x1 found
+as3722-sd2: supplied by +5V_SYS
+as3722-sd3: supplied by +5V_SYS
++1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
+as3722-sd4: supplied by +5V_SYS
++1.05V_RUN: Bringing 0uV into 1050000-1050000uV
+as3722-sd5: supplied by +5V_SYS
+as3722-ldo0: supplied by +1.35V_LP0(sd2)
++1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV
+as3722-ldo2: supplied by +1.8V_VDDIO
+as3722-ldo3: supplied by +3.3V_SYS
++1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV
+as3722-ldo4: supplied by +3.3V_SYS
++3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV
+as3722-ldo5: supplied by +1.8V_VDDIO
++1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV
++VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV
+as3722-ldo7: supplied by +1.8V_VDDIO
++1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
+as3722-ldo9: supplied by +5V_SYS
++2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
+as3722-ldo10: supplied by +5V_SYS
++2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
++1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
+m25p80 spi32765.0: w25q32dw (4096 Kbytes)
+libphy: Fixed MDIO Bus: probed
+CAN device driver interface
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-omap: OMAP-EHCI Host Controller driver
+ehci-orion: EHCI orion driver
+SPEAr-ehci: EHCI SPEAr driver
+ehci-st: EHCI STMicroelectronics driver
+ehci-exynos: EHCI EXYNOS driver
+ehci-atmel: EHCI Atmel driver
+tegra-ehci: Tegra EHCI driver
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-omap3: OHCI OMAP3 driver
+SPEAr-ohci: OHCI SPEAr driver
+ohci-st: OHCI STMicroelectronics driver
+ohci-atmel: OHCI Atmel driver
+usbcore: registered new interface driver usb-storage
+mousedev: PS/2 mouse device common for all mice
+1-0015 supply vcc not found, using dummy regulator
+as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
+as3722-rtc as3722-rtc: RTC interrupt 370
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+0-004c supply vcc not found, using dummy regulator
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc0: Unknown controller version (3). You may experience problems.
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+NET: Registered protocol family 10
+sit: IPv6 over IPv4 tunneling driver
+NET: Registered protocol family 17
+can: controller area network core (rev 20120528 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20120528)
+can: broadcast manager protocol (rev 20120528 t)
+can: netlink gateway (rev 20130117) max_hops=1
+Key type dns_resolver registered
+ThumbEE CPU extension supported.
+Registering SWP/SWPB emulation handler
++3.3V_RUN: supplied by +3.3V_SYS
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
++1.8V_RUN_CAM: supplied by +3.3V_RUN
++VDDIO_SDMMC3: supplied by +3.3V_RUN
++1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
++VDD_LED: supplied by +VDD_MUX
++5V_VDD_TS_SW: supplied by +5V_SYS
++5V_USB_HS: supplied by +5V_SYS
++5V_USB_SS: supplied by +5V_SYS
++3.3V_PANEL: supplied by +3.3V_RUN
++3.3V_LP0: supplied by +3.3V_SYS
++1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
++5V_HDMI_CON: supplied by +5V_SYS
+usb3-0 supply vbus not found, using dummy regulator
+usb3-1 supply vbus not found, using dummy regulator
+elan_i2c 1-0015: failed to read report data: -121
+tegra-sor 54540000.sor: failed to probe output: -517
+panel supply power not found, using dummy regulator
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc1: Unknown controller version (3). You may experience problems.
+mmc1: Invalid maximum block size, assuming 512 bytes
++1.8V_VDDIO: voltage operation not allowed
+mmc1: Switching to 3.3V signalling voltage failed
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc2: Unknown controller version (3). You may experience problems.
+mmc2: Invalid maximum block size, assuming 512 bytes
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+elan_i2c 1-0015: invalid report id data (ff)
+mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
+mmc1: new high speed SDIO card at address 0001
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+mmc2: new high speed SDHC card at address 0007
+mmcblk2: mmc2:0007 SD08G 7.42 GiB 
+Console: switching to colour frame buffer device 170x48
+GPT:Primary header alternate_lba != Alt. header my_lba
+GPT:3014591 != 15564799
+GPT:Primary header thinks Alt. header is not at the end of the disk.
+GPT:3014591 != 15564799
+GPT: Use GNU Parted to correct GPT errors.
+ mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+drm drm: fb0:  frame buffer device
+[drm] Initialized tegra 0.0.0 20120330 on minor 0
+input: gpio-keys as /devices/soc0/gpio-keys/input/input1
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 04:00:09 UTC (946699209)
++1.8V_RUN_CAM: disabling
++3.3V_RUN_CAM: disabling
++1.2V_RUN_CAM_FRONT: disabling
++1.05V_RUN_CAM_REAR: disabling
++2.8V_RUN_TOUCH: disabling
++2.8V_RUN_CAM_AF: disabling
++1.8V_RUN_VPP_FUSE: disabling
++5V_VDD_TS_SW: disabling
++5V_USB_HS: disabling
++5V_USB_SS: disabling
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
+EXT4-fs (mmcblk0p3): recovery complete
+EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 179:3.
+devtmpfs: mounted
+Freeing unused kernel memory: 2048K (c1100000 - c1300000)
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	1969-12-31 16:00:00.000000000 -0800
+++ /tmp/foob	2016-05-31 07:51:06.176550102 -0700
@@ -0,0 +1,261 @@
+
+
+U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01)
+
+TEGRA124
+Model: Acer Chromebook 13 CB5-311
+DRAM:  4 GiB
+:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+MMC init failed
+Using default environment
+
+In:    serial
+Out:   serial
+Err:   serial
+Net:   Net Initialization Skipped
+No ethernet found.
+Hit any key to stop autoboot:  2  1  0 
+Tegra124 (Nyan-big) # 
+Tegra124 (Nyan-big) # usb start
+starting USB...
+USB0:   USB EHCI 1.10
+scanning bus 0 for devices... 2 USB Device(s) found
+USB1:   USB EHCI 1.10
+scanning bus 1 for devices... 2 USB Device(s) found
+       scanning usb for storage devices... 1 Storage Device(s) found
+       scanning usb for ethernet devices... 
+Warning: asx0 using MAC address from net device
+1 Ethernet Device(s) found
+Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash'
+Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+Filename 'zImage.tegra_defconfig'.
+Load address: 0x82000000
+Loading: *#################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #####################################################
+	 3.3 MiB/s
+done
+Bytes transferred = 5538824 (548408 hex)
+Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+Filename 'tegra124-nyan-big.dtb'.
+Load address: 0x83000000
+Loading: *#####
+	 3 MiB/s
+done
+Bytes transferred = 66901 (10555 hex)
+Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
+Kernel image @ 0x82000000 [ 0x000000 - 0x548408 ]
+## Flattened Device Tree blob at 83000000
+   Booting using the fdt blob at 0x83000000
+   Using Device Tree in place at 83000000, end 83013554
+
+Starting kernel ...
+
+console [ttyS0] enabled
+bootconsole [earlycon0] disabled
+[drm] Initialized drm 1.1.0 20060810
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517
+panel supply power not found, using dummy regulator
+loop: module loaded
+as3722 4-0040: AS3722 with revision 0x1 found
+as3722-sd2: supplied by +5V_SYS
+as3722-sd3: supplied by +5V_SYS
++1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
+as3722-sd4: supplied by +5V_SYS
++1.05V_RUN: Bringing 0uV into 1050000-1050000uV
+as3722-sd5: supplied by +5V_SYS
+as3722-ldo0: supplied by +1.35V_LP0(sd2)
++1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV
+as3722-ldo2: supplied by +1.8V_VDDIO
+as3722-ldo3: supplied by +3.3V_SYS
++1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV
+as3722-ldo4: supplied by +3.3V_SYS
++3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV
+as3722-ldo5: supplied by +1.8V_VDDIO
++1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV
++VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV
+as3722-ldo7: supplied by +1.8V_VDDIO
++1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
+as3722-ldo9: supplied by +5V_SYS
++2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
+as3722-ldo10: supplied by +5V_SYS
++2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
++1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
+cros-ec-spi spi32766.0: Chrome EC device registered
+m25p80 spi32765.0: w25q32dw (4096 Kbytes)
+CAN device driver interface
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+tegra-ehci: Tegra EHCI driver
+usbcore: registered new interface driver cdc_acm
+cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
+usbcore: registered new interface driver cdc_wdm
+usbcore: registered new interface driver usb-storage
+mousedev: PS/2 mouse device common for all mice
+input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi32766/spi32766.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0
+as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
+as3722-rtc as3722-rtc: RTC interrupt 370
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+usbcore: registered new interface driver uvcvideo
+USB Video Class driver (1.1.1)
+gspca_main: v2.14.0 registered
+0-004c supply vcc not found, using dummy regulator
+tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0)
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc0: Unknown controller version (3). You may experience problems.
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
+max98090 0-0010: MAX98090 REVID=0x43
+max98090 0-0010: use default 2.8v micbias
+tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok
+input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1
+input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+NET: Registered protocol family 10
+mip6: Mobile IPv6
+sit: IPv6 over IPv4 tunneling driver
+NET: Registered protocol family 17
+NET: Registered protocol family 15
+can: controller area network core (rev 20120528 abi 9)
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
+NET: Registered protocol family 29
+can: raw protocol (rev 20120528)
+can: broadcast manager protocol (rev 20120528 t)
+can: netlink gateway (rev 20130117) max_hops=1
+Bluetooth: RFCOMM socket layer initialized
+Bluetooth: RFCOMM ver 1.11
+Bluetooth: BNEP (Ethernet Emulation) ver 1.3
+Bluetooth: BNEP socket layer initialized
+Bluetooth: HIDP (Human Interface Emulation) ver 1.2
+Bluetooth: HIDP socket layer initialized
+Key type dns_resolver registered
+Registering SWP/SWPB emulation handler
++3.3V_RUN: supplied by +3.3V_SYS
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
++1.8V_RUN_CAM: supplied by +3.3V_RUN
++VDDIO_SDMMC3: supplied by +3.3V_RUN
++1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
++VDD_LED: supplied by +VDD_MUX
++5V_VDD_TS_SW: supplied by +5V_SYS
++5V_USB_HS: supplied by +5V_SYS
++5V_USB_SS: supplied by +5V_SYS
++3.3V_PANEL: supplied by +3.3V_RUN
++3.3V_LP0: supplied by +3.3V_SYS
++1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
++5V_HDMI_CON: supplied by +5V_SYS
+usb3-0 supply vbus not found, using dummy regulator
+usb3-1 supply vbus not found, using dummy regulator
+tegra-sor 54540000.sor: failed to probe output: -517
+panel supply power not found, using dummy regulator
+tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC
+tegra-xusb 70090000.usb: xHCI Host Controller
+tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1
+tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010
+tegra-xusb 70090000.usb: irq 342, io mem 0x70090000
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 6 ports detected
+tegra-xusb 70090000.usb: xHCI Host Controller
+tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2
+usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 2 ports detected
+sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
+mmc1: Unknown controller version (3). You may experience problems.
+mmc1: Invalid maximum block size, assuming 512 bytes
++1.8V_VDDIO: voltage operation not allowed
+mmc1: Switching to 3.3V signalling voltage failed
+mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA 64-bit
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc2: Unknown controller version (3). You may experience problems.
+mmc2: Invalid maximum block size, assuming 512 bytes
+mmc1: new high speed SDIO card at address 0001
+mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+usb 1-2: new high-speed USB device number 2 using tegra-xusb
+mmc2: new high speed SDHC card at address 0007
+mmcblk2: mmc2:0007 SD08G 7.42 GiB 
+GPT:Primary header alternate_lba != Alt. header my_lba
+GPT:3014591 != 15564799
+GPT:Primary header thinks Alt. header is not at the end of the disk.
+GPT:3014591 != 15564799
+GPT: Use GNU Parted to correct GPT errors.
+ mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+Console: switching to colour frame buffer device 170x48
+drm drm: fb0:  frame buffer device
+[drm] Initialized tegra 0.0.0 20120330 on minor 0
+input: gpio-keys as /devices/soc0/gpio-keys/input/input4
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 03:59:11 UTC (946699151)
++1.8V_RUN_CAM: disabling
++1.2V_RUN_CAM_FRONT: disabling
++1.05V_RUN_CAM_REAR: disabling
++2.8V_RUN_TOUCH: disabling
++2.8V_RUN_CAM_AF: disabling
++1.8V_RUN_VPP_FUSE: disabling
++5V_VDD_TS_SW: disabling
+ALSA device list:
+  #0: tegra-hda at 0x70038000 irq 341
+  #1: GoogleNyanBig
+EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
+input: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
+usb 1-3: new high-speed USB device number 3 using tegra-xusb
+EXT4-fs (mmcblk0p3): recovery complete
+EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 179:3.
+devtmpfs: mounted
+Freeing unused kernel memory: 1024K (c0b00000 - c0c00000)
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    5.833960] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65
+usb 1-1: new high-speed USB device number 4 using tegra-xusb
+usb-storage 1-1:1.0: USB Mass Storage device detected
+scsi host0: usb-storage 1-1:1.0
+scsi 0:0:0:0: Direct-Access     SanDisk  SDDR-113         9412 PQ: 0 ANSI: 0
+sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB)
+sd 0:0:0:0: [sda] Write Protect is off
+sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
+sd 0:0:0:0: [sda] No Caching mode page found
+sd 0:0:0:0: [sda] Assuming drive cache: write through
+ sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13
+sd 0:0:0:0: [sda] Attached SCSI removable disk
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2016-05-31 07:51:06.184550103 -0700
+++ /tmp/foob	2016-05-31 07:51:06.184550103 -0700
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801104 us
+Bootloader-Cpu Init at (time stamp): 1800689 us
 
 Pinmux changes applied in kernel way
 
@@ -62,56 +62,57 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801078  us
-Bootloader (AosInit) time: 734243 us
-Bootloader Main Init time: 180074 us
-BlockDevMgrInit time: 157529 us
-PartMgrInit time: 8 us
+Miscellaneous avp time: 1800663  us
+Bootloader (AosInit) time: 734258 us
+Bootloader Main Init time: 180081 us
+BlockDevMgrInit time: 157543 us
+PartMgrInit time: 9 us
 StorMgrInit time: 30 us
 FsMgrInit time: 2 us
-Partition Table load: 76685 us 
-Display init time: 574697 us
-Kernel read time: 325 msec
-Load Kernel Size:   14102528 Bytes
-Bl Kernel ReadSpeed: 43392000 Bytes/sec
-Pre-Kernel Jump time: 1569575 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 5643479 us
+Partition Table load: 76696 us 
+Display init time: 574853 us
+Kernel read time: 352 msec
+Load Kernel Size:   15280128 Bytes
+Bl Kernel ReadSpeed: 43409000 Bytes/sec
+Pre-Kernel Jump time: 1658150 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 5731243 us
 Booting Linux on physical CPU 0x0
-Linux version 4.6.0+ (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Sun May 15 16:07:11 PDT 2016
+Linux version 4.7.0-rc1+ (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue May 31 07:39:48 PDT 2016
 Boot CPU: AArch64 Processor [4e0f0000]
 Memory limited to 1734MB
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
 cma: Reserved 16 MiB at 0x00000000eb400000
 /cpus/cpu@1: missing enable-method property
-percpu: Embedded 20 pages/cpu @ffffffc06c5a3000 s43008 r8192 d30720 u81920
+percpu: Embedded 20 pages/cpu @ffff80006c59f000 s42752 r8192 d30976 u81920
 Detected PIPT I-cache on CPU0
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 436968
 Kernel command line: tegraid=13.1.3.0.0 mem=1734M@2048M memtype=255 vpr=151M@3817M ddr_die=2048M@2048M section=256M commchip_id=0 usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 usbcore.old_scheme_first=1 lp0_vec=0@0x0 tegra_fbmem=32899072@0xad012000 core_edp_mv=1150 core_edp_ma=4000 pmuboard=0x0176:0x0001:0x01:0x43:0x00 displayboard=0x0162:0x0001:0x00:0x42:0x00 power_supply=Adapter audio_codec=rt5640 board_info=0x0176:0x0001:0x01:0x43:0x00 tegraboot=sdmmc gpt gpt_sector=94207 modem_id=0 android.kerneltype=normal
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
 Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
-software IO TLB [mem 0xe5200000-0xe9200000] (64MB) mapped at [ffffffc065200000-ffffffc0691fffff]
-Memory: 1642968K/1775616K available (7000K kernel code, 621K rwdata, 2956K rodata, 816K init, 244K bss, 116264K reserved, 16384K cma-reserved)
+software IO TLB [mem 0xe5200000-0xe9200000] (64MB) mapped at [ffff800065200000-ffff8000691fffff]
+Memory: 1641788K/1775616K available (7492K kernel code, 647K rwdata, 3448K rodata, 960K init, 259K bss, 117444K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
-    modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
-    vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
-      .text : 0xffffff8008080000 - 0xffffff8008754000   (  6992 KB)
-    .rodata : 0xffffff8008754000 - 0xffffff8008a3b000   (  2972 KB)
-      .init : 0xffffff8008a3b000 - 0xffffff8008b07000   (   816 KB)
-      .data : 0xffffff8008b07000 - 0xffffff8008ba2400   (   621 KB)
-    vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
-              0xffffffbdc0000000 - 0xffffffbdc1b18000   (    27 MB actual)
-    fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
-    PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
-    memory  : 0xffffffc000000000 - 0xffffffc06c600000   (  1734 MB)
+    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
+    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
+      .text : 0xffff000008080000 - 0xffff0000087c0000   (  7424 KB)
+    .rodata : 0xffff0000087c0000 - 0xffff000008b30000   (  3520 KB)
+      .init : 0xffff000008b30000 - 0xffff000008c20000   (   960 KB)
+      .data : 0xffff000008c20000 - 0xffff000008cc1e00   (   648 KB)
+       .bss : 0xffff000008cc1e00 - 0xffff000008d02ac0   (   260 KB)
+    fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
+    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
+    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
+              0xffff7e0000000000 - 0xffff7e0001b18000   (    27 MB actual)
+    memory  : 0xffff800000000000 - 0xffff80006c600000   (  1734 MB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 64.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
 RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
 NR_IRQS:64 nr_irqs:64 0
-/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000
+/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
 Tegra clk 127: register failed with -17
 Architected cp15 timer(s) running at 12.00MHz (virt).
 clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
@@ -126,6 +127,7 @@
 EFI services will not be available.
 Brought up 1 CPUs
 SMP: Total of 1 processors activated.
+CPU features: detected feature: 32-bit EL0 Support
 CPU: All CPU(s) started at EL1
 devtmpfs: initialized
 DMI not present or invalid.
@@ -133,11 +135,14 @@
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ ffffff800875a000, 1 data @ ffffff8008b0c000)
+vdso: 2 pages (1 code @ ffff0000087c6000, 1 data @ ffff000008c24000)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
 HugeTLB registered 2 MB page size, pre-allocated 0 pages
+ACPI: Interpreter disabled.
++5V_SYS: supplied by +VDD_MUX
++3.3V_SYS: supplied by +VDD_MUX
 +VDD_LED: Failed to request enable GPIO122: -517
 reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
 +5V_USB_HS: Failed to request enable GPIO108: -517
@@ -163,6 +168,7 @@
 clocksource: Switched to clocksource arch_sys_counter
 VFS: Disk quotas dquot_6.6.0
 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+pnp: PnP ACPI: disabled
 NET: Registered protocol family 2
 TCP established hash table entries: 16384 (order: 5, 131072 bytes)
 TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
@@ -175,11 +181,11 @@
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 Unpacking initramfs...
-Freeing initrd memory: 2364K (ffffffc001680000 - ffffffc0018cf000)
+Freeing initrd memory: 2364K (ffff800001680000 - ffff8000018cf000)
 kvm [1]: HYP mode not available
 futex hash table entries: 256 (order: 3, 32768 bytes)
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(1.079:1): initialized
+audit: type=2000 audit(1.075:1): initialized
 workingset: timestamp_bits=44 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -237,24 +243,21 @@
 9pnet: Installing 9P2000 support
 Key type dns_resolver registered
 registered taskstats version 1
++VDD_LED: supplied by +VDD_MUX
 mmc0: new high speed MMC card at address 0001
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
-mmc1: Unknown controller version (3). You may experience problems.
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
-input: gpio-keys as /devices/platform/gpio-keys/input/input0
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
++5V_USB_HS: supplied by +5V_SYS
++5V_USB_SS: supplied by +5V_SYS
++5V_HDMI_CON: supplied by +5V_SYS
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc1: Unknown controller version (3). You may experience problems.
+input: gpio-keys as /devices/platform/gpio-keys/input/input0
 hctosys: unable to open rtc device (rtc0)
-+3.3V_AVDD_HDMI_AP_GATED: disabling
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc1: Unknown controller version (3). You may experience problems.
++3.3V_AVDD_HDMI_AP_GATED: disabling
 +VDD_LED: disabling
 +5V_USB_HS: disabling
 +5V_USB_SS: disabling
@@ -262,7 +265,14 @@
 +5V_HDMI_CON: disabling
 ALSA device list:
   No soundcards found.
-Freeing unused kernel memory: 816K (ffffff8008a3b000 - ffffff8008b07000)
+Freeing unused kernel memory: 960K (ffff800000b30000 - ffff800000c20000)
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc1: Unknown controller version (3). You may experience problems.
 
 System initialization...
 
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2016-05-31 07:51:06.188550104 -0700
+++ /tmp/foob	2016-05-31 07:51:06.192550105 -0700
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -46,29 +46,29 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #################
-	 903.3 KiB/s
+	 #######################################
+	 4.1 MiB/s
 done
-Bytes transferred = 6919032 (699378 hex)
+Bytes transferred = 7238912 (6e7500 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 825.2 KiB/s
+	 3.4 MiB/s
 done
-Bytes transferred = 21130 (528a hex)
+Bytes transferred = 21172 (52b4 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x699378 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x6e7500 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
-   Using Device Tree in place at 02408000, end 02410289
+   Using Device Tree in place at 02408000, end 024102b3
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.6.0-83646-g2dcd0af (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun May 15 16:04:39 PDT 2016
+Linux version 4.7.0-rc1-95164-g1a695a9 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue May 31 07:38:23 PDT 2016
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: Compulab TrimSlice board
@@ -76,20 +76,20 @@
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c141b3c0, node_mem_map ef7f8000
+free_area_init_node: node 0, pgdat c141bb40, node_mem_map ef7f8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 65536 pages, LIFO batch:15
-percpu: Embedded 12 pages/cpu @ef7cb000 s19776 r8192 d21184 u49152
-pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
+percpu: Embedded 13 pages/cpu @ef7c9000 s23808 r8192 d21248 u53248
+pcpu-alloc: s23808 r8192 d21248 u53248 alloc=13*4096
 pcpu-alloc: [0] 0 [0] 1 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 955940K/1048576K available (9522K kernel code, 1141K rwdata, 4108K rodata, 2048K init, 341K bss, 27100K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 955932K/1048576K available (9529K kernel code, 1142K rwdata, 4476K rodata, 2048K init, 343K bss, 27108K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -97,10 +97,10 @@
     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc104fa34   (14623 kB)
+      .text : 0xc0208000 - 0xc10ad590   (14998 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc141d400   (1141 kB)
-       .bss : 0xc141f000 - 0xc1474518   ( 342 kB)
+      .data : 0xc1300000 - 0xc141dba0   (1143 kB)
+       .bss : 0xc141f000 - 0xc1474ca0   ( 344 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -217,7 +217,7 @@
 pcieport 0000:00:01.0: enabling device (0140 -> 0143)
 pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
 pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
-pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
+pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
 console [ttyS0] disabled
@@ -270,6 +270,30 @@
 ehci-exynos: EHCI EXYNOS driver
 ehci-atmel: EHCI Atmel driver
 tegra-ehci: Tegra EHCI driver
+------------[ cut here ]------------
+WARNING: CPU: 1 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x1bc/0x228
+Modules linked in:
+CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc1-95164-g1a695a9 #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+[<c030f9d0>] (unwind_backtrace) from [<c030b0c0>] (show_stack+0x10/0x14)
+[<c030b0c0>] (show_stack) from [<c05856e8>] (dump_stack+0x84/0xa4)
+[<c05856e8>] (dump_stack) from [<c0341b5c>] (__warn+0xd4/0x100)
+[<c0341b5c>] (__warn) from [<c0341ba8>] (warn_slowpath_null+0x20/0x28)
+[<c0341ba8>] (warn_slowpath_null) from [<c069fbd4>] (__of_reset_control_get+0x1bc/0x228)
+[<c069fbd4>] (__of_reset_control_get) from [<c0911ce8>] (tegra_ehci_probe+0x2d0/0x51c)
+[<c0911ce8>] (tegra_ehci_probe) from [<c0778efc>] (platform_drv_probe+0x50/0xb0)
+[<c0778efc>] (platform_drv_probe) from [<c0777860>] (driver_probe_device+0x1f4/0x2b0)
+[<c0777860>] (driver_probe_device) from [<c07779c8>] (__driver_attach+0xac/0xb0)
+[<c07779c8>] (__driver_attach) from [<c0775e74>] (bus_for_each_dev+0x54/0x88)
+[<c0775e74>] (bus_for_each_dev) from [<c0776e54>] (bus_add_driver+0xe8/0x1f4)
+[<c0776e54>] (bus_add_driver) from [<c07781e4>] (driver_register+0x78/0xf4)
+[<c07781e4>] (driver_register) from [<c0301e7c>] (do_one_initcall+0x3c/0x16c)
+[<c0301e7c>] (do_one_initcall) from [<c1100d80>] (kernel_init_freeable+0x120/0x1ec)
+[<c1100d80>] (kernel_init_freeable) from [<c0b5b4ec>] (kernel_init+0x8/0x118)
+[<c0b5b4ec>] (kernel_init) from [<c0307fb8>] (ret_from_fork+0x14/0x3c)
+---[ end trace e2e36aa2b6a8f59b ]---
+tegra-ehci c5000000.usb: can't get utmi-pads reset from the PHY
+tegra-ehci c5000000.usb: continuing, but please update your DT
 ulpi_phy_power_on: ulpi write failed
 tegra-ehci c5004000.usb: Failed to power on the phy
 tegra-ehci: probe of c5004000.usb failed with error -110
@@ -320,28 +344,28 @@
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
+mmc0: host does not support reading read-only switch, assuming write-enable
+mmc0: new high speed SDHC card at address b368
+mmcblk0: mmc0:b368 NCard 3.70 GiB 
+ mmcblk0: p1
 usb 1-1: new high-speed USB device number 2 using tegra-ehci
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-mmc0: host does not support reading read-only switch, assuming write-enable
-mmc0: new high speed SDHC card at address b368
-mmcblk0: mmc0:b368 NCard 3.70 GiB 
-rtc-em3027 2-0056: hctosys: unable to read the hardware clock
- mmcblk0: p1
-EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 mmc1: new high speed SD card at address b368
+rtc-em3027 2-0056: hctosys: unable to read the hardware clock
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
  mmcblk1: p1 p2
-hub 1-1:1.0: USB hub found
-hub 1-1:1.0: 4 ports detected
-usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
+EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
+hub 1-1:1.0: USB hub found
+hub 1-1:1.0: 4 ports detected
 devtmpfs: mounted
 Freeing unused kernel memory: 2048K (c1100000 - c1300000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
+usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2016-05-31 07:51:06.208550106 -0700
+++ /tmp/foob	2016-05-31 07:51:06.208550106 -0700
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -44,30 +44,30 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ######################################
-	 900.4 KiB/s
+	 #####################################################
+	 902.3 KiB/s
 done
-Bytes transferred = 5315976 (511d88 hex)
+Bytes transferred = 5538824 (548408 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 859.4 KiB/s
+	 861.3 KiB/s
 done
-Bytes transferred = 21130 (528a hex)
+Bytes transferred = 21172 (52b4 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x511d88 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x548408 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
-   Using Device Tree in place at 02408000, end 02410289
+   Using Device Tree in place at 02408000, end 024102b3
 
 Starting kernel ...
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.6.0-83646-g2dcd0af (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun May 15 16:04:30 PDT 2016
+Linux version 4.7.0-rc1-95164-g1a695a9 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue May 31 07:36:14 PDT 2016
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: Compulab TrimSlice board
@@ -76,20 +76,20 @@
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0c5c440, node_mem_map ef7f7000
+free_area_init_node: node 0, pgdat c0c5bd40, node_mem_map ef7f7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 65536 pages, LIFO batch:15
-percpu: Embedded 12 pages/cpu @ef7ca000 s19968 r8192 d20992 u49152
-pcpu-alloc: s19968 r8192 d20992 u49152 alloc=12*4096
+percpu: Embedded 13 pages/cpu @ef7c8000 s23936 r8192 d21120 u53248
+pcpu-alloc: s23936 r8192 d21120 u53248 alloc=13*4096
 pcpu-alloc: [0] 0 [0] 1 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 961804K/1048576K available (7412K kernel code, 375K rwdata, 2516K rodata, 1024K init, 362K bss, 21236K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 961792K/1048576K available (7416K kernel code, 374K rwdata, 2820K rodata, 1024K init, 366K bss, 21248K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -97,10 +97,10 @@
     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc0ab22c4   (10921 kB)
+      .text : 0xc0008000 - 0xc0aff0a4   (11229 kB)
       .init : 0xc0b00000 - 0xc0c00000   (1024 kB)
-      .data : 0xc0c00000 - 0xc0c5dfc0   ( 376 kB)
-       .bss : 0xc0c5f000 - 0xc0cb9a04   ( 363 kB)
+      .data : 0xc0c00000 - 0xc0c5d8c0   ( 375 kB)
+       .bss : 0xc0c5f000 - 0xc0cbab18   ( 367 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
@@ -218,7 +218,7 @@
 pcieport 0000:00:01.0: enabling device (0140 -> 0143)
 pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
 pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
-pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
+pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
 console [ttyS0] disabled
@@ -262,6 +262,30 @@
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-pci: EHCI PCI platform driver
 tegra-ehci: Tegra EHCI driver
+------------[ cut here ]------------
+WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x1b4/0x218
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc1-95164-g1a695a9 #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+[<c010f1e8>] (unwind_backtrace) from [<c010a864>] (show_stack+0x10/0x14)
+[<c010a864>] (show_stack) from [<c033d174>] (dump_stack+0x84/0xa4)
+[<c033d174>] (dump_stack) from [<c011f2f4>] (__warn+0xd4/0x100)
+[<c011f2f4>] (__warn) from [<c011f340>] (warn_slowpath_null+0x20/0x28)
+[<c011f340>] (warn_slowpath_null) from [<c03c06e0>] (__of_reset_control_get+0x1b4/0x218)
+[<c03c06e0>] (__of_reset_control_get) from [<c0513c34>] (tegra_ehci_probe+0x2c8/0x514)
+[<c0513c34>] (tegra_ehci_probe) from [<c0441300>] (platform_drv_probe+0x50/0xb0)
+[<c0441300>] (platform_drv_probe) from [<c043fd2c>] (driver_probe_device+0x1f4/0x2b0)
+[<c043fd2c>] (driver_probe_device) from [<c043fe94>] (__driver_attach+0xac/0xb0)
+[<c043fe94>] (__driver_attach) from [<c043e350>] (bus_for_each_dev+0x54/0x88)
+[<c043e350>] (bus_for_each_dev) from [<c043f320>] (bus_add_driver+0xe8/0x1f4)
+[<c043f320>] (bus_add_driver) from [<c0440690>] (driver_register+0x78/0xf4)
+[<c0440690>] (driver_register) from [<c010179c>] (do_one_initcall+0x3c/0x16c)
+[<c010179c>] (do_one_initcall) from [<c0b00d94>] (kernel_init_freeable+0x11c/0x1e8)
+[<c0b00d94>] (kernel_init_freeable) from [<c07f1574>] (kernel_init+0x8/0x118)
+[<c07f1574>] (kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c)
+---[ end trace c982dcfcafaf66ba ]---
+tegra-ehci c5000000.usb: can't get utmi-pads reset from the PHY
+tegra-ehci c5000000.usb: continuing, but please update your DT
 ulpi_phy_power_on: ulpi write failed
 tegra-ehci c5004000.usb: Failed to power on the phy
 tegra-ehci: probe of c5004000.usb failed with error -110
@@ -305,15 +329,17 @@
 tlv320aic23-codec 2-001a: ASoC: Failed to add route MICIN -> NULL -> Mic Input
 tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok
 usb 1-1: new high-speed USB device number 2 using tegra-ehci
-NET: Registered protocol family 10
 mmc0: host does not support reading read-only switch, assuming write-enable
-mip6: Mobile IPv6
 mmc0: new high speed SDHC card at address b368
 mmc1: new high speed SD card at address b368
-mmcblk0: mmc0:b368 NCard 3.70 GiB 
- mmcblk0: p1
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+mmcblk0: mmc0:b368 NCard 3.70 GiB 
  mmcblk1: p1 p2
+ mmcblk0: p1
+hub 1-1:1.0: USB hub found
+hub 1-1:1.0: 4 ports detected
+NET: Registered protocol family 10
+mip6: Mobile IPv6
 sit: IPv6 over IPv4 tunneling driver
 NET: Registered protocol family 17
 NET: Registered protocol family 15
@@ -321,6 +347,7 @@
 NET: Registered protocol family 29
 can: raw protocol (rev 20120528)
 can: broadcast manager protocol (rev 20120528 t)
+usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 can: netlink gateway (rev 20130117) max_hops=1
 Bluetooth: RFCOMM socket layer initialized
 Bluetooth: RFCOMM ver 1.11
@@ -330,12 +357,9 @@
 Bluetooth: HIDP socket layer initialized
 Key type dns_resolver registered
 Registering SWP/SWPB emulation handler
-utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
-hub 1-1:1.0: USB hub found
-hub 1-1:1.0: 4 ports detected
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
@@ -343,12 +367,11 @@
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
 ALSA device list:
   #0: tegra-trimslice
-EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
+EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
+VFS: Mounted root (ext3 filesystem) on device 179:17.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K (c0b00000 - c0c00000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2016-05-31 07:51:06.236550109 -0700
+++ /tmp/foob	2016-05-31 07:51:06.240550109 -0700
@@ -1,7 +1,7 @@
 [TegraBoot] (version 23.00.2015.14-mobile-1ef66670)
 Processing in cold boot mode Bootloader 2
 A01Q Bootrom Patch rev = 3
-Power-up reason: pmu watchdog
+Power-up reason: on button
 No Battery Present
 Platform has Ddr4 type ram
 max77620 disabling SD1 Remote Sense
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 725400 us
-Basic modules init took 348697 us
-Sec Bootdevice Read Time = 204 ms, Read Size = 8459 KB
-Next stage binary read took 15909 us
-Carveout took 252735 us
-CPU initialization took 92321 us
-Total time taken by TegraBoot 709662 us
+Tegraboot started after 844414 us
+Basic modules init took 348395 us
+Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
+Next stage binary read took 14362 us
+Carveout took 252785 us
+CPU initialization took 92307 us
+Total time taken by TegraBoot 707849 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.566] LPDDR4 Training: Number of tables = 10
+64b[0001.681] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,21 +117,21 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-11674624 bytes read in 725 ms (15.4 MiB/s)
+12852736 bytes read in 754 ms (16.3 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-37136 bytes read in 454 ms (79.1 KiB/s)
+37108 bytes read in 453 ms (79.1 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 494 ms (3.1 MiB/s)
+1627787 bytes read in 495 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Using Device Tree in place at 0000000082000000, end 000000008200c10f
+   Using Device Tree in place at 0000000082000000, end 000000008200c0f3
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.6.0+ (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Sun May 15 16:07:11 PDT 2016
+Linux version 4.7.0-rc1+ (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue May 31 07:39:48 PDT 2016
 Boot CPU: AArch64 Processor [411fd071]
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -149,8 +149,8 @@
 psci: PSCIv0.2 detected in firmware.
 psci: Using standard PSCI v0.2 function IDs
 psci: MIGRATE_INFO_TYPE not supported.
-percpu: Embedded 20 pages/cpu @ffffffc0bff5a000 s43008 r8192 d30720 u81920
-pcpu-alloc: s43008 r8192 d30720 u81920 alloc=20*4096
+percpu: Embedded 20 pages/cpu @ffff8000bff56000 s42752 r8192 d30976 u81920
+pcpu-alloc: s42752 r8192 d30976 u81920 alloc=20*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
@@ -161,24 +161,25 @@
 log_buf_len total cpu_extra contributions: 12288 bytes
 log_buf_len min size: 16384 bytes
 log_buf_len: 32768 bytes
-early log buf free: 14292(87%)
+early log buf free: 14288(87%)
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
-software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [ffffffc07a000000-ffffffc07dffffff]
-Memory: 2981316K/3131392K available (7000K kernel code, 621K rwdata, 2956K rodata, 816K init, 244K bss, 133692K reserved, 16384K cma-reserved)
+software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [ffff80007a000000-ffff80007dffffff]
+Memory: 2980144K/3131392K available (7492K kernel code, 647K rwdata, 3448K rodata, 960K init, 259K bss, 134864K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
-    modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
-    vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
-      .text : 0xffffff8008080000 - 0xffffff8008754000   (  6992 KB)
-    .rodata : 0xffffff8008754000 - 0xffffff8008a3b000   (  2972 KB)
-      .init : 0xffffff8008a3b000 - 0xffffff8008b07000   (   816 KB)
-      .data : 0xffffff8008b07000 - 0xffffff8008ba2400   (   621 KB)
-    vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
-              0xffffffbdc0000000 - 0xffffffbdc3000000   (    48 MB actual)
-    fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
-    PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
-    memory  : 0xffffffc000000000 - 0xffffffc0c0000000   (  3072 MB)
+    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
+    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
+      .text : 0xffff000008080000 - 0xffff0000087c0000   (  7424 KB)
+    .rodata : 0xffff0000087c0000 - 0xffff000008b30000   (  3520 KB)
+      .init : 0xffff000008b30000 - 0xffff000008c20000   (   960 KB)
+      .data : 0xffff000008c20000 - 0xffff000008cc1e00   (   648 KB)
+       .bss : 0xffff000008cc1e00 - 0xffff000008d02ac0   (   260 KB)
+    fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
+    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
+    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
+              0xffff7e0000000000 - 0xffff7e0003000000   (    48 MB actual)
+    memory  : 0xffff800000000000 - 0xffff8000c0000000   (  3072 MB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 64.
@@ -186,7 +187,7 @@
 RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
 NR_IRQS:64 nr_irqs:64 0
 GIC: Using split EOI/Deactivate mode
-/interrupt-controller@0,60004000: 192 interrupts forwarded to /interrupt-controller@0,50041000
+/interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller@50041000
 PLL_MB already enabled. Postponing set full defaults
 PLL_U already enabled. Postponing set full defaults
 PLL_P already enabled. Postponing set full defaults
@@ -214,6 +215,7 @@
 CPU3: Booted secondary processor [411fd071]
 Brought up 4 CPUs
 SMP: Total of 4 processors activated.
+CPU features: detected feature: 32-bit EL0 Support
 CPU: All CPU(s) started at EL2
 alternatives: patching kernel code
 devtmpfs: initialized
@@ -222,11 +224,12 @@
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ ffffff800875a000, 1 data @ ffffff8008b0c000)
+vdso: 2 pages (1 code @ ffff0000087c6000, 1 data @ ffff000008c24000)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
 HugeTLB registered 2 MB page size, pre-allocated 0 pages
+ACPI: Interpreter disabled.
 vgaarb: loaded
 SCSI subsystem initialized
 libata version 3.00 loaded.
@@ -241,6 +244,7 @@
 clocksource: Switched to clocksource arch_sys_counter
 VFS: Disk quotas dquot_6.6.0
 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+pnp: PnP ACPI: disabled
 NET: Registered protocol family 2
 TCP established hash table entries: 32768 (order: 6, 262144 bytes)
 TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
@@ -255,11 +259,12 @@
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
 kvm [1]: Hyp mode initialized successfully
-kvm [1]: interrupt-controller@50044000 IRQ9
-kvm [1]: timer IRQ3
+kvm [1]: vgic-v2@50044000
+kvm [1]: vgic interrupt IRQ1
+kvm [1]: virtual timer IRQ4
 futex hash table entries: 1024 (order: 5, 131072 bytes)
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.435:1): initialized
+audit: type=2000 audit(0.451:1): initialized
 workingset: timestamp_bits=44 max_order=20 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
@@ -330,7 +335,7 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 816K (ffffff8008a3b000 - ffffff8008b07000)
+Freeing unused kernel memory: 960K (ffff800000b30000 - ffff800000c20000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	1969-12-31 16:00:00.000000000 -0800
+++ /tmp/foob	2016-05-31 07:51:06.244550109 -0700
@@ -0,0 +1,291 @@
+psci: probing for conduit method from DT.
+psci: PSCIv1.0 detected in firmware.
+psci: Using standard PSCI v0.2 function IDs
+psci: MIGRATE_INFO_UP_CPU reported invalid physical ID (0x80000000)
+percpu: Embedded 20 pages/cpu @ffff8000bff54000 s42752 r8192 d30976 u81920
+Detected PIPT I-cache on CPU0
+CPU features: enabling workaround for ARM erratum 832075
+CPU features: enabling workaround for ARM erratum 834220
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 735336
+Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
+log_buf_len individual max cpu contribution: 4096 bytes
+log_buf_len total cpu_extra contributions: 12288 bytes
+log_buf_len min size: 16384 bytes
+log_buf_len: 32768 bytes
+early log buf free: 14436(88%)
+PID hash table entries: 4096 (order: 3, 32768 bytes)
+Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
+Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
+software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
+Memory: 2834380K/2988032K available (7492K kernel code, 647K rwdata, 3448K rodata, 960K init, 259K bss, 137268K reserved, 16384K cma-reserved)
+Virtual kernel memory layout:
+    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
+    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
+      .text : 0xffff000008080000 - 0xffff0000087c0000   (  7424 KB)
+    .rodata : 0xffff0000087c0000 - 0xffff000008b30000   (  3520 KB)
+      .init : 0xffff000008b30000 - 0xffff000008c20000   (   960 KB)
+      .data : 0xffff000008c20000 - 0xffff000008cc1e00   (   648 KB)
+       .bss : 0xffff000008cc1e00 - 0xffff000008d02ac0   (   260 KB)
+    fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
+    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
+    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
+              0xffff7e0000000000 - 0xffff7e0003000000   (    48 MB actual)
+    memory  : 0xffff800000000000 - 0xffff8000c0000000   (  3072 MB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+Preemptible hierarchical RCU implementation.
+	Build-time adjustment of leaf fanout to 64.
+	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
+RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
+NR_IRQS:64 nr_irqs:64 0
+GIC: Using split EOI/Deactivate mode
+/interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller@50041000
+boot misc0 0x0: expected 0x80000
+ (comparison mask = 0x400ffffb)
+boot misc2 0x1f720005: expected 0x1f720f05
+ (comparison mask = 0xffffff17)
+PLL_C already enabled. Postponing set full defaults
+PLL_MB already enabled. Postponing set full defaults
+PLL_U already enabled. Postponing set full defaults
+PLL_D already enabled. Postponing set full defaults
+PLL_DP already enabled. Postponing set full defaults
+boot misc0 0x0: expected 0x20
+ (comparison mask = 0x7ffffff)
+boot misc1 0x90000000: expected 0xc0000000
+ (comparison mask = 0xf8000000)
+boot misc2 0x0: expected 0xf400f0da
+ (comparison mask = 0xffffffff)
+boot misc3 0xad78: expected 0x2004f400
+ (comparison mask = 0xffffffff)
+PLL_P already enabled. Postponing set full defaults
+PLL_X already enabled. Postponing set full defaults
+boot misc1 0x0: expected 0x20
+ (comparison mask = 0xffffff)
+Architected cp15 timer(s) running at 19.20MHz (phys).
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
+sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
+Console: colour dummy device 80x25
+console [tty0] enabled
+bootconsole [uart0] disabled
+Booting Linux on physical CPU 0x0
+Linux version 4.7.0-rc1+ (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue May 31 07:39:48 PDT 2016
+Boot CPU: AArch64 Processor [411fd071]
+earlycon: uart0 at MMIO 0x0000000070006000 (options '115200n8')
+bootconsole [uart0] enabled
+efi: Getting EFI parameters from FDT:
+efi: UEFI not found.
+cma: Reserved 16 MiB at 0x00000000f5400000
+psci: probing for conduit method from DT.
+psci: PSCIv1.0 detected in firmware.
+psci: Using standard PSCI v0.2 function IDs
+psci: MIGRATE_INFO_UP_CPU reported invalid physical ID (0x80000000)
+percpu: Embedded 20 pages/cpu @ffff8000bff54000 s42752 r8192 d30976 u81920
+Detected PIPT I-cache on CPU0
+CPU features: enabling workaround for ARM erratum 832075
+CPU features: enabling workaround for ARM erratum 834220
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 735336
+Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
+log_buf_len individual max cpu contribution: 4096 bytes
+log_buf_len total cpu_extra contributions: 12288 bytes
+log_buf_len min size: 16384 bytes
+log_buf_len: 32768 bytes
+early log buf free: 14436(88%)
+PID hash table entries: 4096 (order: 3, 32768 bytes)
+Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
+Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
+software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [ffff800071400000-ffff8000753fffff]
+Memory: 2834380K/2988032K available (7492K kernel code, 647K rwdata, 3448K rodata, 960K init, 259K bss, 137268K reserved, 16384K cma-reserved)
+Virtual kernel memory layout:
+    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
+    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
+      .text : 0xffff000008080000 - 0xffff0000087c0000   (  7424 KB)
+    .rodata : 0xffff0000087c0000 - 0xffff000008b30000   (  3520 KB)
+      .init : 0xffff000008b30000 - 0xffff000008c20000   (   960 KB)
+      .data : 0xffff000008c20000 - 0xffff000008cc1e00   (   648 KB)
+       .bss : 0xffff000008cc1e00 - 0xffff000008d02ac0   (   260 KB)
+    fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
+    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
+    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
+              0xffff7e0000000000 - 0xffff7e0003000000   (    48 MB actual)
+    memory  : 0xffff800000000000 - 0xffff8000c0000000   (  3072 MB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+Preemptible hierarchical RCU implementation.
+	Build-time adjustment of leaf fanout to 64.
+	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
+RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
+NR_IRQS:64 nr_irqs:64 0
+GIC: Using split EOI/Deactivate mode
+/interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller@50041000
+boot misc0 0x0: expected 0x80000
+ (comparison mask = 0x400ffffb)
+boot misc2 0x1f720005: expected 0x1f720f05
+ (comparison mask = 0xffffff17)
+PLL_C already enabled. Postponing set full defaults
+PLL_MB already enabled. Postponing set full defaults
+PLL_U already enabled. Postponing set full defaults
+PLL_D already enabled. Postponing set full defaults
+PLL_DP already enabled. Postponing set full defaults
+boot misc0 0x0: expected 0x20
+ (comparison mask = 0x7ffffff)
+boot misc1 0x90000000: expected 0xc0000000
+ (comparison mask = 0xf8000000)
+boot misc2 0x0: expected 0xf400f0da
+ (comparison mask = 0xffffffff)
+boot misc3 0xad78: expected 0x2004f400
+ (comparison mask = 0xffffffff)
+PLL_P already enabled. Postponing set full defaults
+PLL_X already enabled. Postponing set full defaults
+boot misc1 0x0: expected 0x20
+ (comparison mask = 0xffffff)
+Architected cp15 timer(s) running at 19.20MHz (phys).
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
+sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
+Console: colour dummy device 80x25
+console [tty0] enabled
+bootconsole [uart0] disabled
+Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
+pid_max: default: 32768 minimum: 301
+Security Framework initialized
+Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
+Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
+ASID allocator initialised with 65536 entries
+Speedo Revision 4
+Tegra Revision: A02 SKU: 19 CPU Process: 0 SoC Process: 0
+EFI services will not be available.
+Detected PIPT I-cache on CPU1
+CPU1: Booted secondary processor [411fd071]
+Detected PIPT I-cache on CPU2
+CPU2: Booted secondary processor [411fd071]
+Detected PIPT I-cache on CPU3
+CPU3: Booted secondary processor [411fd071]
+Brought up 4 CPUs
+SMP: Total of 4 processors activated.
+CPU features: detected feature: 32-bit EL0 Support
+CPU: All CPU(s) started at EL2
+alternatives: patching kernel code
+devtmpfs: initialized
+DMI not present or invalid.
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+cpuidle: using governor menu
+vdso: 2 pages (1 code @ ffff0000087c6000, 1 data @ ffff000008c24000)
+hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
+DMA: preallocated 256 KiB pool for atomic allocations
+Serial: AMBA PL011 UART driver
+HugeTLB registered 2 MB page size, pre-allocated 0 pages
+ACPI: Interpreter disabled.
+vgaarb: loaded
+SCSI subsystem initialized
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+dmi: Firmware registration failed.
+Advanced Linux Sound Architecture Driver Initialized.
+clocksource: Switched to clocksource arch_sys_counter
+VFS: Disk quotas dquot_6.6.0
+VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+pnp: PnP ACPI: disabled
+NET: Registered protocol family 2
+TCP established hash table entries: 32768 (order: 6, 262144 bytes)
+TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
+TCP: Hash tables configured (established 32768 bind 32768)
+UDP hash table entries: 2048 (order: 4, 65536 bytes)
+UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+Unpacking initramfs...
+Freeing initrd memory: 2364K (ffff800009ee8000 - ffff80000a137000)
+kvm [1]: 8-bit VMID
+kvm [1]: Hyp mode initialized successfully
+kvm [1]: vgic-v2@50044000
+kvm [1]: vgic interrupt IRQ1
+kvm [1]: virtual timer IRQ4
+futex hash table entries: 1024 (order: 5, 131072 bytes)
+audit: initializing netlink subsys (disabled)
+audit: type=2000 audit(0.223:1): initialized
+workingset: timestamp_bits=44 max_order=20 bucket_order=0
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+fuse init (API version 7.24)
+9p: Installing v9fs 9p2000 file system support
+io scheduler noop registered
+io scheduler cfq registered (default)
+tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
+xenfs: not registering filesystem on non-xen platform
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 312, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
+Unable to detect cache hierarchy from DT for CPU 0
+loop: module loaded
+tun: Universal TUN/TAP device driver, 1.6
+tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
+e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
+e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
+igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
+sky2: driver version 1.30
+VFIO - User Level meta-driver version: 0.3
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-msm: Qualcomm On-Chip EHCI Host Controller
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+usbcore: registered new interface driver usb-storage
+mousedev: PS/2 mouse device common for all mice
+i2c /dev entries driver
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+NET: Registered protocol family 17
+9pnet: Installing 9P2000 support
+Key type dns_resolver registered
+registered taskstats version 1
+input: gpio-keys as /devices/platform/gpio-keys/input/input0
+hctosys: unable to open rtc device (rtc0)
+ALSA device list:
+  No soundcards found.
+Freeing unused kernel memory: 960K (ffff800000b30000 - ffff800000c20000)
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 BGND3R 29.1 GiB 
+mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
+
+System initialization...
+
+Mounting /proc :[SUCCESS]
+Mounting /sys :[SUCCESS]
+Mounting /dev :[SUCCESS]
+Mounting /dev/pts :[SUCCESS]
+Mounting /sys/kernel/debug :[SUCCESS]
+Mounting other filesystems :[SUCCESS]
+Enabling hot-plug :[SUCCESS]
+Populating /dev :[SUCCESS]
+Starting syslogd :[SUCCESS]
+Starting telnetd :[SUCCESS]
+
+System initialization complete.
+
+Please press Enter to activate this console. 
\ No newline at end of file
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2016-05-31 07:51:06.248550110 -0700
+++ /tmp/foob	2016-05-31 07:51:06.248550110 -0700
@@ -38,10 +38,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #################
-	 3.1 MiB/s
+	 #######################################
+	 3.2 MiB/s
 done
-Bytes transferred = 6919032 (699378 hex)
+Bytes transferred = 7238912 (6e7500 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -50,17 +50,17 @@
 Loading: *####
 	 3.1 MiB/s
 done
-Bytes transferred = 51467 (c90b hex)
+Bytes transferred = 51511 (c937 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x699378 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x6e7500 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff0000, end 8ffff90a ... OK
+   Loading Device Tree to 8fff0000, end 8ffff936 ... OK
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.6.0-83646-g2dcd0af (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun May 15 16:04:39 PDT 2016
+Linux version 4.7.0-rc1-95164-g1a695a9 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue May 31 07:38:23 PDT 2016
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -68,20 +68,20 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c141b3c0, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c141bb40, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 12 pages/cpu @eef93000 s19776 r8192 d21184 u49152
-pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
+percpu: Embedded 13 pages/cpu @eef8f000 s23808 r8192 d21248 u53248
+pcpu-alloc: s23808 r8192 d21248 u53248 alloc=13*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1995052K/2096128K available (9522K kernel code, 1141K rwdata, 4108K rodata, 2048K init, 341K bss, 35540K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1995036K/2096128K available (9529K kernel code, 1142K rwdata, 4476K rodata, 2048K init, 343K bss, 35556K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -89,10 +89,10 @@
     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc104fa34   (14623 kB)
+      .text : 0xc0208000 - 0xc10ad590   (14998 kB)
       .init : 0xc1100000 - 0xc1300000   (2048 kB)
-      .data : 0xc1300000 - 0xc141d400   (1141 kB)
-       .bss : 0xc141f000 - 0xc1474518   ( 342 kB)
+      .data : 0xc1300000 - 0xc141dba0   (1143 kB)
+       .bss : 0xc141f000 - 0xc1474ca0   ( 344 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -152,6 +152,21 @@
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
+vrtc: supplied by vdd_5v_in
+vio: supplied by vdd_5v_in
+vdd1: supplied by vdd_5v_in
+vddio_ddr_1v2: Bringing 600000uV into 1200000-1200000uV
+vdd2: supplied by vdd_5v_in
+ldo1: supplied by vdd_1v5_gen
+ldo2: supplied by vdd_1v5_gen
+vdd_sata,avdd_plle: Bringing 1200000uV into 1050000-1050000uV
+ldo3: supplied by vdd_5v_in
+ldo4: supplied by vdd_5v_in
+ldo5: supplied by vdd_5v_in
+ldo6: supplied by vdd_1v8_gen
+avdd_dsi_csi,pwrdet_mipi: Bringing 1000000uV into 1200000-1200000uV
+ldo7: supplied by vdd_1v8_gen
+ldo8: supplied by vdd_1v8_gen
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
@@ -198,8 +213,6 @@
 tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1"
 tegra-pcie 3000.pcie-controller: 2x3 configuration
-vdd_1v5_gen: supplied by vdd_5v_in
-vdd_pexa,vdd_pexb: supplied by vdd_1v5_gen
 tegra-pcie 3000.pcie-controller: Failed to get supply 'hvdd-pex': -517
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
@@ -240,6 +253,30 @@
 ehci-exynos: EHCI EXYNOS driver
 ehci-atmel: EHCI Atmel driver
 tegra-ehci: Tegra EHCI driver
+------------[ cut here ]------------
+WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x1bc/0x228
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc1-95164-g1a695a9 #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+[<c030f9d0>] (unwind_backtrace) from [<c030b0c0>] (show_stack+0x10/0x14)
+[<c030b0c0>] (show_stack) from [<c05856e8>] (dump_stack+0x84/0xa4)
+[<c05856e8>] (dump_stack) from [<c0341b5c>] (__warn+0xd4/0x100)
+[<c0341b5c>] (__warn) from [<c0341ba8>] (warn_slowpath_null+0x20/0x28)
+[<c0341ba8>] (warn_slowpath_null) from [<c069fbd4>] (__of_reset_control_get+0x1bc/0x228)
+[<c069fbd4>] (__of_reset_control_get) from [<c0911ce8>] (tegra_ehci_probe+0x2d0/0x51c)
+[<c0911ce8>] (tegra_ehci_probe) from [<c0778efc>] (platform_drv_probe+0x50/0xb0)
+[<c0778efc>] (platform_drv_probe) from [<c0777860>] (driver_probe_device+0x1f4/0x2b0)
+[<c0777860>] (driver_probe_device) from [<c07779c8>] (__driver_attach+0xac/0xb0)
+[<c07779c8>] (__driver_attach) from [<c0775e74>] (bus_for_each_dev+0x54/0x88)
+[<c0775e74>] (bus_for_each_dev) from [<c0776e54>] (bus_add_driver+0xe8/0x1f4)
+[<c0776e54>] (bus_add_driver) from [<c07781e4>] (driver_register+0x78/0xf4)
+[<c07781e4>] (driver_register) from [<c0301e7c>] (do_one_initcall+0x3c/0x16c)
+[<c0301e7c>] (do_one_initcall) from [<c1100d80>] (kernel_init_freeable+0x120/0x1ec)
+[<c1100d80>] (kernel_init_freeable) from [<c0b5b4ec>] (kernel_init+0x8/0x118)
+[<c0b5b4ec>] (kernel_init) from [<c0307fb8>] (ret_from_fork+0x14/0x3c)
+---[ end trace a43096641c27d393 ]---
+tegra-ehci 7d004000.usb: can't get utmi-pads reset from the PHY
+tegra-ehci 7d004000.usb: continuing, but please update your DT
 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 ohci-pci: OHCI PCI platform driver
 ohci-platform: OHCI generic platform driver
@@ -277,15 +314,20 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
-tegra-pcie 3000.pcie-controller: 2x3 configuration
+vdd_ddr: supplied by vdd_5v_in
+vdd_5v_sata: supplied by vdd_5v_in
+usb1_vbus: supplied by vdd_5v_in
+usb3_vbus: supplied by vdd_5v_in
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
++VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
+tegra-pcie 3000.pcie-controller: 2x3 configuration
 tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
+mmc0: error -110 whilst initialising SD card
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
 mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
 mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
-mmc0: error -110 whilst initialising SD card
 tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
 mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB
 Primary GPT is invalid, using alternate GPT.
@@ -323,13 +365,11 @@
 pcieport 0000:00:01.0: enabling device (0140 -> 0143)
 pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
 pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
-pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
+pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
-+VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
-vdd_1v8_gen: supplied by vdd_5v_in
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 drm drm: No connectors reported connected with modes
@@ -337,7 +377,6 @@
 Console: switching to colour frame buffer device 128x48
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
-usb3_vbus: supplied by vdd_5v_in
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci 7d004000.usb: EHCI Host Controller
 tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
@@ -363,4 +402,5 @@
 Freeing unused kernel memory: 2048K (c1100000 - c1300000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.838567] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2016-05-31 07:51:06.268550111 -0700
+++ /tmp/foob	2016-05-31 07:51:06.268550111 -0700
@@ -36,30 +36,30 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ######################################
+	 #####################################################
 	 3.2 MiB/s
 done
-Bytes transferred = 5315976 (511d88 hex)
+Bytes transferred = 5538824 (548408 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.9 MiB/s
+	 3.1 MiB/s
 done
-Bytes transferred = 51467 (c90b hex)
+Bytes transferred = 51511 (c937 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x511d88 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x548408 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff0000, end 8ffff90a ... OK
+   Loading Device Tree to 8fff0000, end 8ffff936 ... OK
 
 Starting kernel ...
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.6.0-83646-g2dcd0af (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun May 15 16:04:30 PDT 2016
+Linux version 4.7.0-rc1-95164-g1a695a9 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue May 31 07:36:14 PDT 2016
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -68,20 +68,20 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0c5c440, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0c5bd40, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-percpu: Embedded 12 pages/cpu @eef92000 s19968 r8192 d20992 u49152
-pcpu-alloc: s19968 r8192 d20992 u49152 alloc=12*4096
+percpu: Embedded 13 pages/cpu @eef8e000 s23936 r8192 d21120 u53248
+pcpu-alloc: s23936 r8192 d21120 u53248 alloc=13*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2000916K/2096128K available (7412K kernel code, 375K rwdata, 2516K rodata, 1024K init, 362K bss, 29676K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 2000896K/2096128K available (7416K kernel code, 374K rwdata, 2820K rodata, 1024K init, 366K bss, 29696K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -89,10 +89,10 @@
     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc0ab22c4   (10921 kB)
+      .text : 0xc0008000 - 0xc0aff0a4   (11229 kB)
       .init : 0xc0b00000 - 0xc0c00000   (1024 kB)
-      .data : 0xc0c00000 - 0xc0c5dfc0   ( 376 kB)
-       .bss : 0xc0c5f000 - 0xc0cb9a04   ( 363 kB)
+      .data : 0xc0c00000 - 0xc0c5d8c0   ( 375 kB)
+       .bss : 0xc0c5f000 - 0xc0cbab18   ( 367 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
 NR_IRQS:16 nr_irqs:16 16
@@ -148,6 +148,21 @@
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
+vrtc: supplied by vdd_5v_in
+vio: supplied by vdd_5v_in
+vdd1: supplied by vdd_5v_in
+vddio_ddr_1v2: Bringing 600000uV into 1200000-1200000uV
+vdd2: supplied by vdd_5v_in
+ldo1: supplied by vdd_1v5_gen
+ldo2: supplied by vdd_1v5_gen
+vdd_sata,avdd_plle: Bringing 1200000uV into 1050000-1050000uV
+ldo3: supplied by vdd_5v_in
+ldo4: supplied by vdd_5v_in
+ldo5: supplied by vdd_5v_in
+ldo6: supplied by vdd_1v8_gen
+avdd_dsi_csi,pwrdet_mipi: Bringing 1000000uV into 1200000-1200000uV
+ldo7: supplied by vdd_1v8_gen
+ldo8: supplied by vdd_1v8_gen
 Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
@@ -197,8 +212,6 @@
 tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1"
 tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1"
 tegra-pcie 3000.pcie-controller: 2x3 configuration
-vdd_1v5_gen: supplied by vdd_5v_in
-vdd_pexa,vdd_pexb: supplied by vdd_1v5_gen
 tegra-pcie 3000.pcie-controller: Failed to get supply 'hvdd-pex': -517
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
@@ -230,6 +243,30 @@
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-pci: EHCI PCI platform driver
 tegra-ehci: Tegra EHCI driver
+------------[ cut here ]------------
+WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x1b4/0x218
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc1-95164-g1a695a9 #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+[<c010f1e8>] (unwind_backtrace) from [<c010a864>] (show_stack+0x10/0x14)
+[<c010a864>] (show_stack) from [<c033d174>] (dump_stack+0x84/0xa4)
+[<c033d174>] (dump_stack) from [<c011f2f4>] (__warn+0xd4/0x100)
+[<c011f2f4>] (__warn) from [<c011f340>] (warn_slowpath_null+0x20/0x28)
+[<c011f340>] (warn_slowpath_null) from [<c03c06e0>] (__of_reset_control_get+0x1b4/0x218)
+[<c03c06e0>] (__of_reset_control_get) from [<c0513c34>] (tegra_ehci_probe+0x2c8/0x514)
+[<c0513c34>] (tegra_ehci_probe) from [<c0441300>] (platform_drv_probe+0x50/0xb0)
+[<c0441300>] (platform_drv_probe) from [<c043fd2c>] (driver_probe_device+0x1f4/0x2b0)
+[<c043fd2c>] (driver_probe_device) from [<c043fe94>] (__driver_attach+0xac/0xb0)
+[<c043fe94>] (__driver_attach) from [<c043e350>] (bus_for_each_dev+0x54/0x88)
+[<c043e350>] (bus_for_each_dev) from [<c043f320>] (bus_add_driver+0xe8/0x1f4)
+[<c043f320>] (bus_add_driver) from [<c0440690>] (driver_register+0x78/0xf4)
+[<c0440690>] (driver_register) from [<c010179c>] (do_one_initcall+0x3c/0x16c)
+[<c010179c>] (do_one_initcall) from [<c0b00d94>] (kernel_init_freeable+0x11c/0x1e8)
+[<c0b00d94>] (kernel_init_freeable) from [<c07f1574>] (kernel_init+0x8/0x118)
+[<c07f1574>] (kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c)
+---[ end trace 0a71686d8ec472db ]---
+tegra-ehci 7d004000.usb: can't get utmi-pads reset from the PHY
+tegra-ehci 7d004000.usb: continuing, but please update your DT
 usbcore: registered new interface driver cdc_acm
 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 usbcore: registered new interface driver cdc_wdm
@@ -283,9 +320,14 @@
 Bluetooth: HIDP socket layer initialized
 Key type dns_resolver registered
 Registering SWP/SWPB emulation handler
-tegra-pcie 3000.pcie-controller: 2x3 configuration
+vdd_ddr: supplied by vdd_5v_in
+vdd_5v_sata: supplied by vdd_5v_in
+usb1_vbus: supplied by vdd_5v_in
+usb3_vbus: supplied by vdd_5v_in
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
++VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
+tegra-pcie 3000.pcie-controller: 2x3 configuration
 tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
 tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
@@ -321,13 +363,11 @@
 pcieport 0000:00:01.0: enabling device (0140 -> 0143)
 pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
 pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
-pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
+pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
-+VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
-vdd_1v8_gen: supplied by vdd_5v_in
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 drm drm: No connectors reported connected with modes
@@ -335,7 +375,6 @@
 Console: switching to colour frame buffer device 128x48
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
-usb3_vbus: supplied by vdd_5v_in
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci 7d004000.usb: EHCI Host Controller
 tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
@@ -349,7 +388,7 @@
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
-tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
+tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:03 UTC (946684803)
 vdd_sata,avdd_plle: disabling
 usb1_vbus: disabling
 ALSA device list:
