U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.multi_v7_defconfig Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################# 3.5 MiB/s done Bytes transferred = 6919032 (699378 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.6 MiB/s done Bytes transferred = 64138 (fa8a hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x699378 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83012a89 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc6-83187-g04974df (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue May 3 07:33:44 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c141b3c0, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 12 pages/cpu @eef8f000 s19776 r8192 d21184 u49152 [ 0.000000] pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1995024K/2096128K available (9522K kernel code, 1141K rwdata, 4108K rodata, 2048K init, 341K bss, 35568K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc104fa90 (14623 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc141d400 (1141 kB) [ 0.000000] .bss : 0xc141f000 - 0xc1474518 ( 342 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000031] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000045] Switching to timer-based delay loop, resolution 1000ns [ 0.005110] Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.005128] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.005146] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.005159] Switching to timer-based delay loop, resolution 83ns [ 0.005571] Console: colour dummy device 80x30 [ 0.005596] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000) [ 0.005610] pid_max: default: 32768 minimum: 301 [ 0.005708] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.005719] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006319] CPU: Testing write buffer coherency: ok [ 0.006537] /cpus/cpu@0 missing clock-frequency property [ 0.006574] /cpus/cpu@1 missing clock-frequency property [ 0.006611] /cpus/cpu@2 missing clock-frequency property [ 0.006649] /cpus/cpu@3 missing clock-frequency property [ 0.006662] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006712] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.009728] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.011234] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.011909] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.012564] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.012648] Brought up 4 CPUs [ 0.012668] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.012676] CPU: All CPU(s) started in SVC mode. [ 0.014154] devtmpfs: initialized [ 0.031999] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.032752] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.034317] pinctrl core: initialized pinctrl subsystem [ 0.036112] NET: Registered protocol family 16 [ 0.038165] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.054912] cpuidle: using governor menu [ 0.072564] No ATAGs? [ 0.072599] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.072609] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.078689] Serial: AMBA PL011 UART driver [ 0.110910] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.110926] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.111016] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.111030] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.111193] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.111205] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.111290] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.111302] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.111386] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.111398] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.111482] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.111494] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.115077] vgaarb: loaded [ 0.116099] SCSI subsystem initialized [ 0.116275] libata version 3.00 loaded. [ 0.116575] usbcore: registered new interface driver usbfs [ 0.116642] usbcore: registered new interface driver hub [ 0.116717] usbcore: registered new device driver usb [ 0.120471] pps_core: LinuxPPS API ver. 1 registered [ 0.120480] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.120509] PTP clock support registered [ 0.120736] EDAC MC: Ver: 3.0.0 [ 0.124026] clocksource: Switched to clocksource arch_sys_counter [ 0.135375] NET: Registered protocol family 2 [ 0.135898] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.135996] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.136182] TCP: Hash tables configured (established 8192 bind 8192) [ 0.136233] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.136274] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.136447] NET: Registered protocol family 1 [ 0.136694] RPC: Registered named UNIX socket transport module. [ 0.136704] RPC: Registered udp transport module. [ 0.136711] RPC: Registered tcp transport module. [ 0.136718] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.136737] PCI: CLS 0 bytes, default 64 [ 0.137739] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.139400] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.140215] workingset: timestamp_bits=28 max_order=19 bucket_order=0 [ 0.151911] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.152784] NFS: Registering the id_resolver key type [ 0.152816] Key type id_resolver registered [ 0.152824] Key type id_legacy registered [ 0.152889] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.154252] bounce: pool size: 64 pages [ 0.154468] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.154486] io scheduler noop registered [ 0.154502] io scheduler deadline registered [ 0.154539] io scheduler cfq registered (default) [ 0.174998] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 0.175050] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 0.182375] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.184415] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 0.248078] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.251111] console [ttyS0] disabled [ 0.251146] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 333, base_baud = 25500000) is a Tegra [ 1.074383] console [ttyS0] enabled [ 1.078771] SuperH (H)SCI(F) driver initialized [ 1.084389] msm_serial: driver initialized [ 1.088689] STMicroelectronics ASC driver initialized [ 1.096307] [drm] Initialized drm 1.1.0 20060810 [ 1.103958] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.123319] brd: module loaded [ 1.132356] loop: module loaded [ 1.136076] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.144316] as3722 4-0040: AS3722 with revision 0x1 found [ 1.167792] +5V_SYS: supplied by +VDD_MUX [ 1.171861] +1.05V_RUN: supplied by +5V_SYS [ 1.176172] tegra-ahci 70027000.sata: Failed to get supply 'hvdd': -517 [ 1.182844] tegra-ahci 70027000.sata: Failed to get regulators [ 1.203701] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.212250] libphy: Fixed MDIO Bus: probed [ 1.217102] CAN device driver interface [ 1.223128] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.230095] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.239176] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.246629] usbcore: registered new interface driver pegasus [ 1.252358] usbcore: registered new interface driver asix [ 1.257812] usbcore: registered new interface driver ax88179_178a [ 1.263958] usbcore: registered new interface driver cdc_ether [ 1.269863] usbcore: registered new interface driver smsc75xx [ 1.275681] usbcore: registered new interface driver smsc95xx [ 1.281485] usbcore: registered new interface driver net1080 [ 1.287200] usbcore: registered new interface driver cdc_subset [ 1.293172] usbcore: registered new interface driver zaurus [ 1.298841] usbcore: registered new interface driver cdc_ncm [ 1.304766] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.312130] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.318672] ehci-pci: EHCI PCI platform driver [ 1.323173] ehci-platform: EHCI generic platform driver [ 1.328631] ehci-omap: OMAP-EHCI Host Controller driver [ 1.334032] ehci-orion: EHCI orion driver [ 1.338194] SPEAr-ehci: EHCI SPEAr driver [ 1.342372] ehci-st: EHCI STMicroelectronics driver [ 1.347415] ehci-exynos: EHCI EXYNOS driver [ 1.351787] ehci-atmel: EHCI Atmel driver [ 1.355960] tegra-ehci: Tegra EHCI driver [ 1.360309] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.365740] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.373485] tegra-ehci 7d004000.usb: irq 350, io mem 0x7d004000 [ 1.389047] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.395829] hub 1-0:1.0: USB hub found [ 1.399626] hub 1-0:1.0: 1 port detected [ 1.404193] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.410393] ohci-pci: OHCI PCI platform driver [ 1.414902] ohci-platform: OHCI generic platform driver [ 1.420327] ohci-omap3: OHCI OMAP3 driver [ 1.424501] SPEAr-ohci: OHCI SPEAr driver [ 1.428660] ohci-st: OHCI STMicroelectronics driver [ 1.433705] ohci-atmel: OHCI Atmel driver [ 1.438554] usbcore: registered new interface driver usb-storage [ 1.446365] mousedev: PS/2 mouse device common for all mice [ 1.455499] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.462384] as3722-rtc as3722-rtc: RTC interrupt 373 [ 1.470778] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.477960] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.484755] i2c /dev entries driver [ 1.494828] 0-004c supply vcc not found, using dummy regulator [ 1.509921] sdhci: Secure Digital Host Controller Interface driver [ 1.516111] sdhci: Copyright(c) Pierre Ossman [ 1.522223] Synopsys Designware Multimedia Card Interface Driver [ 1.529501] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.535981] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.540888] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.545825] mmc0: Unknown controller version (3). You may experience problems. [ 1.553407] mmc0: Unknown controller version (3). You may experience problems. [ 1.560722] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.599047] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 1.609025] ledtrig-cpu: registered to indicate activity on CPUs [ 1.615421] usbcore: registered new interface driver usbhid [ 1.621002] usbhid: USB HID core driver [ 1.633624] NET: Registered protocol family 10 [ 1.638829] sit: IPv6 over IPv4 tunneling driver [ 1.644310] NET: Registered protocol family 17 [ 1.648762] can: controller area network core (rev 20120528 abi 9) [ 1.655017] NET: Registered protocol family 29 [ 1.659481] can: raw protocol (rev 20120528) [ 1.663749] can: broadcast manager protocol (rev 20120528 t) [ 1.669432] can: netlink gateway (rev 20130117) max_hops=1 [ 1.675342] Key type dns_resolver registered [ 1.680332] ThumbEE CPU extension supported. [ 1.684629] Registering SWP/SWPB emulation handler [ 1.705148] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 1.712041] +3.3V_SYS: supplied by +VDD_MUX [ 1.716317] +3.3V_LP0: supplied by +3.3V_SYS [ 1.721000] +1.35V_LP0(sd2): supplied by +5V_SYS [ 1.725707] +1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2) [ 1.732885] tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes [ 1.738680] mmc0: new high speed MMC card at address 0001 [ 1.740109] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 1.741175] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 1.741899] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 1.742311] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 1.745474] mmcblk0: p1 [ 1.772499] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008 [ 1.802096] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes [ 1.811424] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000 [ 1.826375] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00 [ 1.833630] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.839819] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 1.846698] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 1.854020] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.859544] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 1.865657] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.872573] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 1.878682] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.885594] PCI: bus0: Fast back to back transfers disabled [ 1.891179] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.899193] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.907399] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 1.913457] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 1.920443] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.934177] PCI: bus1: Fast back to back transfers disabled [ 1.939775] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.946635] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 1.952678] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 1.958288] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 1.965101] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.972470] pci 0000:02:00.0: supports D1 D2 [ 1.976751] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.989170] PCI: bus2: Fast back to back transfers disabled [ 1.994768] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 2.001535] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 2.008333] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 2.015132] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 2.022879] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 2.028985] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 2.036324] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.041302] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 2.048105] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 2.055870] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 2.063202] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.069307] pci 0000:00:02.0: PCI bridge to [bus 02] [ 2.074280] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 2.080381] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 2.087175] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 2.094949] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 2.102022] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 2.108357] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 2.115327] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 2.121862] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 2.128638] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 2.135686] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 2.141988] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.148957] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.155523] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded [ 2.162530] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.168134] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 2.185847] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0a1c000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 391 [ 2.195533] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.205032] +5V_HDMI_CON: supplied by +5V_SYS [ 2.209558] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.215487] +3.3V_RUN: supplied by +3.3V_SYS [ 2.219857] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.228280] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.234932] [drm] No driver support for vblank timestamp query. [ 2.359879] tegra-hdmi 54280000.hdmi: cannot set audio to 44100 at 297000000 pclk [ 2.530560] Console: switching to colour frame buffer device 512x135 [ 2.625812] drm drm: fb0: frame buffer device [ 2.644150] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.651366] +5V_SATA: supplied by +5V_SYS [ 2.655633] +12V_SATA: supplied by +VDD_MUX [ 2.660263] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.669352] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.680581] scsi host0: tegra-ahci [ 2.684950] scsi host1: tegra-ahci [ 2.688698] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 343 [ 2.696764] ata2: DUMMY [ 2.700898] +5V_USB_HS: supplied by +5V_SYS [ 2.706713] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.712145] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.719920] tegra-ehci 7d008000.usb: irq 351, io mem 0x7d008000 [ 2.734148] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.741313] hub 2-0:1.0: USB hub found [ 2.745171] hub 2-0:1.0: 1 port detected [ 2.750977] cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19 [ 2.759182] cpu cpu0: dev_pm_opp_get_max_volt_latency: Invalid regulator (-6) [ 2.766368] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 2.773752] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 2.783679] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.788600] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.793539] mmc1: Unknown controller version (3). You may experience problems. [ 2.800877] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 2.805573] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.844291] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 2.853147] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.860516] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:03 UTC (946684923) [ 2.872563] +1.8V_RUN_CAM: disabling [ 2.876351] +2.8V_RUN_CAM: disabling [ 2.880137] +1.2V_RUN_CAM_FRONT: disabling [ 2.884448] +1.05V_RUN_CAM_REAR: disabling [ 2.888691] +3.3V_RUN_TOUCH: disabling [ 2.892606] +2.8V_RUN_CAM_AF: disabling [ 2.896604] +1.8V_RUN_VPP_FUSE: disabling [ 2.900775] +USB0_VBUS_SW: disabling [ 3.011602] ata1: SATA link down (SStatus 0 SControl 300) [ 3.017734] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 3.059764] EXT4-fs (mmcblk0p1): recovery complete [ 3.065502] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.073624] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 3.083358] devtmpfs: mounted [ 3.088107] Freeing unused kernel memory: 2048K (c1100000 - c1300000) [ 3.092878] mmc1: new high speed SDHC card at address aaaa [ 3.093798] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 3.108493] mmcblk1: p1 p2 p3 bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#