U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.multi_v7_defconfig Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################# 4 MiB/s done Bytes transferred = 6918656 (699200 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.6 MiB/s done Bytes transferred = 64138 (fa8a hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x699200 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83012a89 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc5-82962-g02da2d7 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Apr 24 16:34:30 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c141b3c0, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 12 pages/cpu @eef8f000 s19776 r8192 d21184 u49152 [ 0.000000] pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1995024K/2096128K available (9522K kernel code, 1141K rwdata, 4108K rodata, 2048K init, 341K bss, 35568K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc104fa90 (14623 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc141d400 (1141 kB) [ 0.000000] .bss : 0xc141f000 - 0xc1474518 ( 342 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000032] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000045] Switching to timer-based delay loop, resolution 1000ns [ 0.005097] Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.005115] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.005133] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.005146] Switching to timer-based delay loop, resolution 83ns [ 0.005583] Console: colour dummy device 80x30 [ 0.005608] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000) [ 0.005622] pid_max: default: 32768 minimum: 301 [ 0.005718] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.005729] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006327] CPU: Testing write buffer coherency: ok [ 0.006546] /cpus/cpu@0 missing clock-frequency property [ 0.006584] /cpus/cpu@1 missing clock-frequency property [ 0.006621] /cpus/cpu@2 missing clock-frequency property [ 0.006659] /cpus/cpu@3 missing clock-frequency property [ 0.006671] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006718] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.009775] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.011261] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.011934] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.012590] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.012672] Brought up 4 CPUs [ 0.012693] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.012700] CPU: All CPU(s) started in SVC mode. [ 0.014178] devtmpfs: initialized [ 0.031987] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.032748] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.034315] pinctrl core: initialized pinctrl subsystem [ 0.036120] NET: Registered protocol family 16 [ 0.038200] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.054909] cpuidle: using governor menu [ 0.072671] No ATAGs? [ 0.072706] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.072716] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.078795] Serial: AMBA PL011 UART driver [ 0.110912] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.110929] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.111021] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.111034] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.111199] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.111212] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.111299] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.111311] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.111397] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.111409] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.111494] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.111505] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.115067] vgaarb: loaded [ 0.116081] SCSI subsystem initialized [ 0.116256] libata version 3.00 loaded. [ 0.116555] usbcore: registered new interface driver usbfs [ 0.116621] usbcore: registered new interface driver hub [ 0.116686] usbcore: registered new device driver usb [ 0.120447] pps_core: LinuxPPS API ver. 1 registered [ 0.120456] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.120486] PTP clock support registered [ 0.120715] EDAC MC: Ver: 3.0.0 [ 0.124026] clocksource: Switched to clocksource arch_sys_counter [ 0.135352] NET: Registered protocol family 2 [ 0.135868] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.135967] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.136153] TCP: Hash tables configured (established 8192 bind 8192) [ 0.136205] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.136247] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.136420] NET: Registered protocol family 1 [ 0.136667] RPC: Registered named UNIX socket transport module. [ 0.136676] RPC: Registered udp transport module. [ 0.136683] RPC: Registered tcp transport module. [ 0.136690] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.136710] PCI: CLS 0 bytes, default 64 [ 0.137728] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.139395] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.140211] workingset: timestamp_bits=28 max_order=19 bucket_order=0 [ 0.151931] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.152803] NFS: Registering the id_resolver key type [ 0.152834] Key type id_resolver registered [ 0.152842] Key type id_legacy registered [ 0.152908] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.154277] bounce: pool size: 64 pages [ 0.154492] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.154508] io scheduler noop registered [ 0.154523] io scheduler deadline registered [ 0.154560] io scheduler cfq registered (default) [ 0.174947] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 0.175000] tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517 [ 0.182303] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.184338] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 0.247314] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.250338] console [ttyS0] disabled [ 0.250373] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 333, base_baud = 25500000) is a Tegra [ 1.073750] console [ttyS0] enabled [ 1.078141] SuperH (H)SCI(F) driver initialized [ 1.083728] msm_serial: driver initialized [ 1.088048] STMicroelectronics ASC driver initialized [ 1.095659] [drm] Initialized drm 1.1.0 20060810 [ 1.103319] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.122670] brd: module loaded [ 1.131703] loop: module loaded [ 1.135423] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.143654] as3722 4-0040: AS3722 with revision 0x1 found [ 1.167103] +5V_SYS: supplied by +VDD_MUX [ 1.171169] +1.05V_RUN: supplied by +5V_SYS [ 1.175481] tegra-ahci 70027000.sata: Failed to get supply 'hvdd': -517 [ 1.182152] tegra-ahci 70027000.sata: Failed to get regulators [ 1.202987] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.211552] libphy: Fixed MDIO Bus: probed [ 1.216411] CAN device driver interface [ 1.222433] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.229400] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.238477] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.245933] usbcore: registered new interface driver pegasus [ 1.251662] usbcore: registered new interface driver asix [ 1.257116] usbcore: registered new interface driver ax88179_178a [ 1.263262] usbcore: registered new interface driver cdc_ether [ 1.269169] usbcore: registered new interface driver smsc75xx [ 1.274988] usbcore: registered new interface driver smsc95xx [ 1.280795] usbcore: registered new interface driver net1080 [ 1.286509] usbcore: registered new interface driver cdc_subset [ 1.292492] usbcore: registered new interface driver zaurus [ 1.298153] usbcore: registered new interface driver cdc_ncm [ 1.304096] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.311451] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.317993] ehci-pci: EHCI PCI platform driver [ 1.322494] ehci-platform: EHCI generic platform driver [ 1.327950] ehci-omap: OMAP-EHCI Host Controller driver [ 1.333335] ehci-orion: EHCI orion driver [ 1.337512] SPEAr-ehci: EHCI SPEAr driver [ 1.341688] ehci-st: EHCI STMicroelectronics driver [ 1.346731] ehci-exynos: EHCI EXYNOS driver [ 1.351097] ehci-atmel: EHCI Atmel driver [ 1.355271] tegra-ehci: Tegra EHCI driver [ 1.359619] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.365051] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.372800] tegra-ehci 7d004000.usb: irq 350, io mem 0x7d004000 [ 1.384048] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.390830] hub 1-0:1.0: USB hub found [ 1.394629] hub 1-0:1.0: 1 port detected [ 1.399192] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.405393] ohci-pci: OHCI PCI platform driver [ 1.409900] ohci-platform: OHCI generic platform driver [ 1.415323] ohci-omap3: OHCI OMAP3 driver [ 1.419495] SPEAr-ohci: OHCI SPEAr driver [ 1.423653] ohci-st: OHCI STMicroelectronics driver [ 1.428696] ohci-atmel: OHCI Atmel driver [ 1.433546] usbcore: registered new interface driver usb-storage [ 1.441354] mousedev: PS/2 mouse device common for all mice [ 1.450631] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.457517] as3722-rtc as3722-rtc: RTC interrupt 373 [ 1.465872] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.473063] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.479858] i2c /dev entries driver [ 1.489900] 0-004c supply vcc not found, using dummy regulator [ 1.504965] sdhci: Secure Digital Host Controller Interface driver [ 1.511157] sdhci: Copyright(c) Pierre Ossman [ 1.517260] Synopsys Designware Multimedia Card Interface Driver [ 1.524540] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.531009] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.535921] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.540860] mmc0: Unknown controller version (3). You may experience problems. [ 1.548455] mmc0: Unknown controller version (3). You may experience problems. [ 1.555770] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.594047] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit [ 1.603997] ledtrig-cpu: registered to indicate activity on CPUs [ 1.610401] usbcore: registered new interface driver usbhid [ 1.615981] usbhid: USB HID core driver [ 1.628603] NET: Registered protocol family 10 [ 1.633814] sit: IPv6 over IPv4 tunneling driver [ 1.639291] NET: Registered protocol family 17 [ 1.643742] can: controller area network core (rev 20120528 abi 9) [ 1.650001] NET: Registered protocol family 29 [ 1.654463] can: raw protocol (rev 20120528) [ 1.658730] can: broadcast manager protocol (rev 20120528 t) [ 1.664418] can: netlink gateway (rev 20130117) max_hops=1 [ 1.670321] Key type dns_resolver registered [ 1.675321] ThumbEE CPU extension supported. [ 1.679621] Registering SWP/SWPB emulation handler [ 1.697717] tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration [ 1.704608] +3.3V_SYS: supplied by +VDD_MUX [ 1.708821] +3.3V_LP0: supplied by +3.3V_SYS [ 1.713469] +1.35V_LP0(sd2): supplied by +5V_SYS [ 1.718171] +1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2) [ 1.725664] tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes [ 1.733577] mmc0: new high speed MMC card at address 0001 [ 1.739044] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008 [ 1.748824] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 1.754329] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 1.757973] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes [ 1.760284] tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000 [ 1.775129] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00 [ 1.775138] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.775149] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 1.775156] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 1.775163] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.775204] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 1.775328] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.775681] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 1.775797] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.776154] PCI: bus0: Fast back to back transfers disabled [ 1.776163] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.776179] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.776425] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 1.776479] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 1.776703] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.784181] PCI: bus1: Fast back to back transfers disabled [ 1.784195] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.784485] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 1.784521] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 1.784562] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 1.784591] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.784766] pci 0000:02:00.0: supports D1 D2 [ 1.784772] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.794174] PCI: bus2: Fast back to back transfers disabled [ 1.794187] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 1.794366] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 1.794375] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 1.794385] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 1.794393] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 1.794404] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 1.794440] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.794452] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 1.794471] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 1.794502] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 1.794530] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 1.794543] pci 0000:00:02.0: PCI bridge to [bus 02] [ 1.794550] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 1.794561] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 1.794570] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 1.794610] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 1.794748] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 1.795027] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.795033] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.795043] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 1.795138] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 1.795231] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 1.795470] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 1.795475] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.795485] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded [ 1.795807] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.795830] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 1.806026] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0a12000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 391 [ 1.806035] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.807246] +5V_HDMI_CON: supplied by +5V_SYS [ 1.807400] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.807578] +3.3V_RUN: supplied by +3.3V_SYS [ 1.807637] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.810804] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.810809] [drm] No driver support for vblank timestamp query. [ 1.810848] drm drm: No connectors reported connected with modes [ 1.810857] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.172471] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 2.174573] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 2.177689] mmcblk0: p1 [ 2.180194] Console: switching to colour frame buffer device 128x48 [ 2.208240] drm drm: fb0: frame buffer device [ 2.224147] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.231319] +5V_SATA: supplied by +5V_SYS [ 2.235551] +12V_SATA: supplied by +VDD_MUX [ 2.240487] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.249564] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.260369] scsi host0: tegra-ahci [ 2.264994] scsi host1: tegra-ahci [ 2.268744] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 343 [ 2.276782] ata2: DUMMY [ 2.280767] +5V_USB_HS: supplied by +5V_SYS [ 2.286596] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.292038] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.299843] tegra-ehci 7d008000.usb: irq 351, io mem 0x7d008000 [ 2.314144] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.321318] hub 2-0:1.0: USB hub found [ 2.325166] hub 2-0:1.0: 1 port detected [ 2.330920] cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19 [ 2.339117] cpu cpu0: dev_pm_opp_get_max_volt_latency: Invalid regulator (-6) [ 2.346294] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 2.353666] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 2.363517] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.368430] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.373367] mmc1: Unknown controller version (3). You may experience problems. [ 2.380724] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 2.385437] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.424304] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit [ 2.433057] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.440326] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:13 UTC (946684813) [ 2.452418] +1.8V_RUN_CAM: disabling [ 2.456216] +2.8V_RUN_CAM: disabling [ 2.459998] +1.2V_RUN_CAM_FRONT: disabling [ 2.464303] +1.05V_RUN_CAM_REAR: disabling [ 2.468629] +3.3V_RUN_TOUCH: disabling [ 2.472590] +2.8V_RUN_CAM_AF: disabling [ 2.476592] +1.8V_RUN_VPP_FUSE: disabling [ 2.480760] +USB0_VBUS_SW: disabling [ 2.591455] ata1: SATA link down (SStatus 0 SControl 300) [ 2.597584] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 2.645515] EXT4-fs (mmcblk0p1): recovery complete [ 2.651265] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.659372] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 2.669707] devtmpfs: mounted [ 2.673699] mmc1: new high speed SDHC card at address aaaa [ 2.674986] Freeing unused kernel memory: 2048K (c1100000 - c1300000) [ 2.687025] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 2.702369] mmcblk1: p1 p2 p3 bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#