Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2016-01-28 03:39:53.943320970 -0800
+++ /tmp/foob	2016-01-28 03:39:53.943320970 -0800
@@ -1,141 +0,0 @@
-Booting Linux on physical CPU 0x0
-Initializing cgroup subsys cpu
-Linux version 4.4.0+ (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Sun Jan 10 15:34:42 PST 2016
-Boot CPU: AArch64 Processor [411fd070]
-Memory limited to 1024MB
-efi: Getting EFI parameters from FDT:
-efi: UEFI not found.
-cma: Reserved 16 MiB at 0x000000007f000000
-psci: probing for conduit method from DT.
-psci: PSCIv0.2 detected in firmware.
-psci: Using standard PSCI v0.2 function IDs
-psci: Trusted OS migration not required
-PERCPU: Embedded 15 pages/cpu @ffffffc03efe0000 s24576 r8192 d28672 u61440
-Detected PIPT I-cache on CPU0
-CPU features: enabling workaround for ARM erratum 832075
-CPU features: enabling workaround for ARM erratum 834220
-Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258048
-Kernel command line: root=/dev/vda2 rw rootwait mem=1024M console=ttyAMA0,38400n8 init=/bin/bash
-PID hash table entries: 4096 (order: 3, 32768 bytes)
-Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
-Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
-software IO TLB [mem 0x79c00000-0x7dc00000] (64MB) mapped at [ffffffc039c00000-ffffffc03dbfffff]
-Memory: 938868K/1048576K available (5526K kernel code, 506K rwdata, 2340K rodata, 540K init, 209K bss, 93324K reserved, 16384K cma-reserved)
-Virtual kernel memory layout:
-    vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000   (   246 GB)
-    vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
-              0xffffffbdc1000000 - 0xffffffbdc2000000   (    16 MB actual)
-    fixed   : 0xffffffbffa7fd000 - 0xffffffbffac00000   (  4108 KB)
-    PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000   (    16 MB)
-    modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
-    memory  : 0xffffffc000000000 - 0xffffffc040000000   (  1024 MB)
-      .init : 0xffffffc000831000 - 0xffffffc0008b8000   (   540 KB)
-      .text : 0xffffffc000080000 - 0xffffffc0008309f4   (  7875 KB)
-      .data : 0xffffffc0008c9000 - 0xffffffc000947a00   (   507 KB)
-SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
-Preemptible hierarchical RCU implementation.
-	Build-time adjustment of leaf fanout to 64.
-	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
-RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
-NR_IRQS:64 nr_irqs:64 0
-Architected cp15 timer(s) running at 62.50MHz (virt).
-clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
-sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns
-Console: colour dummy device 80x25
-Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=250000)
-pid_max: default: 32768 minimum: 301
-Security Framework initialized
-Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
-Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
-Initializing cgroup subsys memory
-Initializing cgroup subsys hugetlb
-EFI services will not be available.
-ASID allocator initialised with 65536 entries
-Brought up 1 CPUs
-SMP: Total of 1 processors activated.
-CPU: All CPU(s) started at EL1
-alternatives: patching kernel code
-devtmpfs: initialized
-DMI not present or invalid.
-clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
-pinctrl core: initialized pinctrl subsystem
-NET: Registered protocol family 16
-cpuidle: using governor ladder
-cpuidle: using governor menu
-vdso: 2 pages (1 code @ ffffffc0008d1000, 1 data @ ffffffc0008d0000)
-hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
-DMA: preallocated 256 KiB pool for atomic allocations
-Serial: AMBA PL011 UART driver
-9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 38, base_baud = 0) is a PL011 rev1
-console [ttyAMA0] enabled
-vgaarb: loaded
-SCSI subsystem initialized
-usbcore: registered new interface driver usbfs
-usbcore: registered new interface driver hub
-usbcore: registered new device driver usb
-dmi: Firmware registration failed.
-clocksource: Switched to clocksource arch_sys_counter
-NET: Registered protocol family 2
-TCP established hash table entries: 8192 (order: 4, 65536 bytes)
-TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
-TCP: Hash tables configured (established 8192 bind 8192)
-UDP hash table entries: 512 (order: 2, 16384 bytes)
-UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
-NET: Registered protocol family 1
-RPC: Registered named UNIX socket transport module.
-RPC: Registered udp transport module.
-RPC: Registered tcp transport module.
-RPC: Registered tcp NFSv4.1 backchannel transport module.
-kvm [1]: HYP mode not available
-futex hash table entries: 256 (order: 3, 32768 bytes)
-audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.592:1): initialized
-HugeTLB registered 2 MB page size, pre-allocated 0 pages
-VFS: Disk quotas dquot_6.6.0
-VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
-NFS: Registering the id_resolver key type
-Key type id_resolver registered
-Key type id_legacy registered
-fuse init (API version 7.23)
-9p: Installing v9fs 9p2000 file system support
-io scheduler noop registered
-io scheduler cfq registered (default)
-Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-msm_serial: driver initialized
-Unable to detect cache hierarchy from DT for CPU 0
-loop: module loaded
- vda: vda1 vda2
-tun: Universal TUN/TAP device driver, 1.6
-tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
-sky2: driver version 1.30
-ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
-ehci-pci: EHCI PCI platform driver
-ehci-platform: EHCI generic platform driver
-ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
-ohci-pci: OHCI PCI platform driver
-ohci-platform: OHCI generic platform driver
-usbcore: registered new interface driver usb-storage
-mousedev: PS/2 mouse device common for all mice
-sdhci: Secure Digital Host Controller Interface driver
-sdhci: Copyright(c) Pierre Ossman
-Synopsys Designware Multimedia Card Interface Driver
-sdhci-pltfm: SDHCI platform and OF driver helper
-ledtrig-cpu: registered to indicate activity on CPUs
-usbcore: registered new interface driver usbhid
-usbhid: USB HID core driver
-NET: Registered protocol family 17
-9pnet: Installing 9P2000 support
-Key type dns_resolver registered
-registered taskstats version 1
-hctosys: unable to open rtc device (rtc0)
-uart-pl011 9000000.pl011: no DMA platform data
-EXT4-fs (vda2): couldn't mount as ext3 due to feature incompatibilities
-EXT4-fs (vda2): recovery complete
-EXT4-fs (vda2): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext4 filesystem) on device 254:2.
-devtmpfs: mounted
-Freeing unused kernel memory: 540K (ffffffc000831000 - ffffffc0008b8000)
-Freeing alternatives memory: 48K (ffffffc0008b8000 - ffffffc0008c4000)
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-bash-4.3# 
\ No newline at end of file
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2016-01-28 03:39:53.951320966 -0800
+++ /tmp/foob	2016-01-28 03:39:53.951320966 -0800
@@ -37,21 +37,22 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ########################################################
+	 #################################################################
+	 #######
 	 3.3 MiB/s
 done
-Bytes transferred = 6544168 (63db28 hex)
+Bytes transferred = 6775528 (6762e8 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3 MiB/s
+	 3.3 MiB/s
 done
 Bytes transferred = 34894 (884e hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x63db28 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x6762e8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff84d ... OK
@@ -59,28 +60,29 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.4.0-55855-gafd2ff9 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jan 10 15:33:17 PST 2016
+Linux version 4.5.0-rc1-66887-g92e963f (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jan 28 03:33:07 PST 2016
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
+CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
 debug: ignoring loglevel setting.
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0fc2400, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c106c440, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-PERCPU: Embedded 12 pages/cpu @eefa3000 s19136 r8192 d21824 u49152
-pcpu-alloc: s19136 r8192 d21824 u49152 alloc=12*4096
+PERCPU: Embedded 12 pages/cpu @eefa3000 s18880 r8192 d22080 u49152
+pcpu-alloc: s18880 r8192 d22080 u49152 alloc=12*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998592K/2096128K available (8239K kernel code, 1040K rwdata, 3736K rodata, 1044K init, 340K bss, 32000K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1997908K/2096128K available (8491K kernel code, 1112K rwdata, 4040K rodata, 1096K init, 345K bss, 32684K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -88,10 +90,10 @@
     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0dbaccc   (11980 kB)
-      .init : 0xc0dbb000 - 0xc0ec0000   (1044 kB)
-      .data : 0xc0ec0000 - 0xc0fc4360   (1041 kB)
-       .bss : 0xc0fc7000 - 0xc101c3e8   ( 341 kB)
+      .text : 0xc0208000 - 0xc0e45cc8   (12536 kB)
+      .init : 0xc0e46000 - 0xc0f58000   (1096 kB)
+      .data : 0xc0f58000 - 0xc106e3c0   (1113 kB)
+       .bss : 0xc1071000 - 0xc10c75a0   ( 346 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -100,6 +102,7 @@
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
 L2C: failed to init: -19
+Tegra clk 127: register failed with -17
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
 clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
@@ -132,7 +135,6 @@
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
-cpuidle: using governor ladder
 cpuidle: using governor menu
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
@@ -190,19 +192,20 @@
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-SuperH (H)SCI(F) driver initialized
-msm_serial: driver initialized
 console [ttyS0] disabled
 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 329, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
 STMicroelectronics ASC driver initialized
 [drm] Initialized drm 1.1.0 20060810
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 vdd-ao: supplied by vdd_ac_bat
 vddio-1v8: supplied by vdd-ao
 avdd-dsi-csi: supplied by vddio-1v8
-tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 vdd-sys-3v3: supplied by vdd_ac_bat
 avdd-lcd: supplied by vdd-sys-3v3
+brd: module loaded
 loop: module loaded
 m25p80 spi32766.0: w25q32dw (4096 Kbytes)
 libphy: Fixed MDIO Bus: probed
@@ -252,12 +255,8 @@
 sdhci-pltfm: SDHCI platform and OF driver helper
 sdhci-tegra 78000400.sdhci: Got CD GPIO
 sdhci-tegra 78000400.sdhci: Got WP GPIO
-sdhci-tegra 78000400.sdhci: No vmmc regulator found
-sdhci-tegra 78000400.sdhci: No vqmmc regulator found
 mmc0: Invalid maximum block size, assuming 512 bytes
 mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA
-sdhci-tegra 78000600.sdhci: No vmmc regulator found
-sdhci-tegra 78000600.sdhci: No vqmmc regulator found
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
 ledtrig-cpu: registered to indicate activity on CPUs
@@ -276,11 +275,11 @@
 Registering SWP/SWPB emulation handler
 vdd-sys-5v0: supplied by vdd_ac_bat
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
-mmc1: MAN_BKOPS_EN bit is not set
 vdd_hdmi_5v0: supplied by vdd-sys-5v0
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
-mmc1: new high speed MMC card at address 0001
+mmc1: MAN_BKOPS_EN bit is not set
+mmc1: new HS200 MMC card at address 0001
 mmcblk0: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
@@ -292,12 +291,49 @@
 usb2_vbus: supplied by vdd-sys-5v0
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
+------------[ cut here ]------------
+WARNING: CPU: 1 PID: 80 at kernel/workqueue.c:2361 check_flush_dependency+0xc8/0x124()
+workqueue: WQ_MEM_RECLAIM deferwq:deferred_probe_work_func is flushing !WQ_MEM_RECLAIM events:lru_add_drain_per_cpu
+Modules linked in:
+CPU: 1 PID: 80 Comm: kworker/u8:1 Not tainted 4.5.0-rc1-66887-g92e963f #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+Workqueue: deferwq deferred_probe_work_func
+[<c02188b0>] (unwind_backtrace) from [<c0213f90>] (show_stack+0x10/0x14)
+[<c0213f90>] (show_stack) from [<c04882ac>] (dump_stack+0x78/0x94)
+[<c04882ac>] (dump_stack) from [<c024ab38>] (warn_slowpath_common+0x74/0xb0)
+[<c024ab38>] (warn_slowpath_common) from [<c024ac08>] (warn_slowpath_fmt+0x30/0x40)
+[<c024ac08>] (warn_slowpath_fmt) from [<c025dc20>] (check_flush_dependency+0xc8/0x124)
+[<c025dc20>] (check_flush_dependency) from [<c025dd34>] (flush_work+0x54/0x144)
+[<c025dd34>] (flush_work) from [<c02da1d8>] (lru_add_drain_all+0x124/0x180)
+[<c02da1d8>] (lru_add_drain_all) from [<c030bca0>] (migrate_prep+0x8/0x10)
+[<c030bca0>] (migrate_prep) from [<c02d51f0>] (alloc_contig_range+0xc4/0x2f8)
+[<c02d51f0>] (alloc_contig_range) from [<c030d5cc>] (cma_alloc+0xd8/0x1a0)
+[<c030d5cc>] (cma_alloc) from [<c021e39c>] (__alloc_from_contiguous+0x38/0xdc)
+[<c021e39c>] (__alloc_from_contiguous) from [<c021ff8c>] (__dma_alloc+0x21c/0x250)
+[<c021ff8c>] (__dma_alloc) from [<c0220044>] (arm_dma_alloc+0x48/0x54)
+[<c0220044>] (arm_dma_alloc) from [<c03061f0>] (dma_pool_alloc+0x1dc/0x210)
+[<c03061f0>] (dma_pool_alloc) from [<c07c6694>] (ehci_qh_alloc+0x3c/0xb4)
+[<c07c6694>] (ehci_qh_alloc) from [<c07cac8c>] (ehci_setup+0x154/0x478)
+[<c07cac8c>] (ehci_setup) from [<c07d0d44>] (tegra_ehci_reset+0xc/0x50)
+[<c07d0d44>] (tegra_ehci_reset) from [<c07a1108>] (usb_add_hcd+0x300/0x830)
+[<c07a1108>] (usb_add_hcd) from [<c07d06bc>] (tegra_ehci_probe+0x3b8/0x504)
+[<c07d06bc>] (tegra_ehci_probe) from [<c0658814>] (platform_drv_probe+0x50/0xac)
+[<c0658814>] (platform_drv_probe) from [<c0657180>] (driver_probe_device+0x1f4/0x2b0)
+[<c0657180>] (driver_probe_device) from [<c0655710>] (bus_for_each_drv+0x44/0x8c)
+[<c0655710>] (bus_for_each_drv) from [<c0656f04>] (__device_attach+0x9c/0x100)
+[<c0656f04>] (__device_attach) from [<c0656590>] (bus_probe_device+0x84/0x8c)
+[<c0656590>] (bus_probe_device) from [<c06569c4>] (deferred_probe_work_func+0x60/0x8c)
+[<c06569c4>] (deferred_probe_work_func) from [<c025eb7c>] (process_one_work+0x134/0x338)
+[<c025eb7c>] (process_one_work) from [<c025ede4>] (worker_thread+0x2c/0x4f0)
+[<c025ede4>] (worker_thread) from [<c0263f70>] (kthread+0xd8/0xf4)
+[<c0263f70>] (kthread) from [<c0210e78>] (ret_from_fork+0x14/0x3c)
+---[ end trace 57ccde47964c09b4 ]---
 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-07-23 08:33:46 UTC (964341226)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-08 16:42:58 UTC (947349778)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -306,7 +342,7 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 1044K (c0dbb000 - c0ec0000)
+Freeing unused kernel memory: 1096K (c0e46000 - c0f58000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.243991] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.499002] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2016-01-28 03:39:53.959320961 -0800
+++ /tmp/foob	2016-01-28 03:39:53.959320961 -0800
@@ -27,6 +27,7 @@
 Tegra114 (Dalmore) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug earlyprintk init=/bin/bash'
 Tegra114 (Dalmore) # setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
 Tegra114 (Dalmore) # tftpboot 0x81000000 zImage.tegra_defconfig
+Waiting for Ethernet connection... done.
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'zImage.tegra_defconfig'.
@@ -36,21 +37,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##############################
-	 3.1 MiB/s
+	 #################################
+	 3.2 MiB/s
 done
-Bytes transferred = 5204120 (4f6898 hex)
+Bytes transferred = 5254256 (502c70 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3 MiB/s
+	 3.3 MiB/s
 done
 Bytes transferred = 34894 (884e hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x4f6898 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x502c70 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff84d ... OK
@@ -59,10 +60,9 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Initializing cgroup subsys cpu
-Initializing cgroup subsys cpuacct
-Linux version 4.4.0-55855-gafd2ff9 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jan 10 15:33:33 PST 2016
+Linux version 4.5.0-rc1-66887-g92e963f (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Jan 28 03:33:39 PST 2016
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
+CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
 debug: ignoring loglevel setting.
@@ -70,20 +70,20 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0a0e780, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0a313c0, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-PERCPU: Embedded 12 pages/cpu @eefa2000 s19392 r8192 d21568 u49152
-pcpu-alloc: s19392 r8192 d21568 u49152 alloc=12*4096
+PERCPU: Embedded 12 pages/cpu @eefa2000 s19136 r8192 d21824 u49152
+pcpu-alloc: s19136 r8192 d21824 u49152 alloc=12*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2002352K/2096128K available (7131K kernel code, 352K rwdata, 2452K rodata, 332K init, 364K bss, 28240K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 2002216K/2096128K available (7212K kernel code, 371K rwdata, 2484K rodata, 340K init, 367K bss, 28376K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -91,15 +91,16 @@
     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc09640d0   (9585 kB)
-      .init : 0xc0965000 - 0xc09b8000   ( 332 kB)
-      .data : 0xc09b8000 - 0xc0a102a0   ( 353 kB)
-       .bss : 0xc0a13000 - 0xc0a6e090   ( 365 kB)
+      .text : 0xc0008000 - 0xc0980680   (9698 kB)
+      .init : 0xc0981000 - 0xc09d6000   ( 340 kB)
+      .data : 0xc09d6000 - 0xc0a32ee0   ( 372 kB)
+       .bss : 0xc0a35000 - 0xc0a90d88   ( 368 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
 L2C: failed to init: -19
+Tegra clk 127: register failed with -17
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
 clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
@@ -112,8 +113,6 @@
 pid_max: default: 32768 minimum: 301
 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
-Initializing cgroup subsys freezer
-Initializing cgroup subsys debug
 CPU: Testing write buffer coherency: ok
 /cpus/cpu@0 missing clock-frequency property
 /cpus/cpu@1 missing clock-frequency property
@@ -134,7 +133,6 @@
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
-cpuidle: using governor ladder
 cpuidle: using governor menu
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
@@ -201,10 +199,10 @@
 bootconsole [earlycon0] disabled
 bootconsole [earlycon0] disabled
 [drm] Initialized drm 1.1.0 20060810
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 vdd-ao: supplied by vdd_ac_bat
 vddio-1v8: supplied by vdd-ao
 avdd-dsi-csi: supplied by vddio-1v8
-tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 vdd-sys-3v3: supplied by vdd_ac_bat
 avdd-lcd: supplied by vdd-sys-3v3
 loop: module loaded
@@ -246,18 +244,14 @@
 sdhci-pltfm: SDHCI platform and OF driver helper
 sdhci-tegra 78000400.sdhci: Got CD GPIO
 sdhci-tegra 78000400.sdhci: Got WP GPIO
-sdhci-tegra 78000400.sdhci: No vmmc regulator found
-sdhci-tegra 78000400.sdhci: No vqmmc regulator found
 mmc0: Invalid maximum block size, assuming 512 bytes
 mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA
-sdhci-tegra 78000600.sdhci: No vmmc regulator found
-sdhci-tegra 78000600.sdhci: No vqmmc regulator found
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
 mmc1: MAN_BKOPS_EN bit is not set
-mmc1: new high speed MMC card at address 0001
+mmc1: new HS200 MMC card at address 0001
 mmcblk0: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
@@ -295,12 +289,49 @@
 usb2_vbus: supplied by vdd-sys-5v0
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
+------------[ cut here ]------------
+WARNING: CPU: 0 PID: 6 at kernel/workqueue.c:2361 check_flush_dependency+0xc8/0x12c()
+workqueue: WQ_MEM_RECLAIM deferwq:deferred_probe_work_func is flushing !WQ_MEM_RECLAIM events:lru_add_drain_per_cpu
+Modules linked in:
+CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.5.0-rc1-66887-g92e963f #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+Workqueue: deferwq deferred_probe_work_func
+[<c0017200>] (unwind_backtrace) from [<c0012870>] (show_stack+0x10/0x14)
+[<c0012870>] (show_stack) from [<c023afa4>] (dump_stack+0x84/0xd0)
+[<c023afa4>] (dump_stack) from [<c0026b78>] (warn_slowpath_common+0x74/0xb0)
+[<c0026b78>] (warn_slowpath_common) from [<c0026c48>] (warn_slowpath_fmt+0x30/0x40)
+[<c0026c48>] (warn_slowpath_fmt) from [<c0039790>] (check_flush_dependency+0xc8/0x12c)
+[<c0039790>] (check_flush_dependency) from [<c00398ac>] (flush_work+0x54/0x11c)
+[<c00398ac>] (flush_work) from [<c00bfe60>] (lru_add_drain_all+0x124/0x180)
+[<c00bfe60>] (lru_add_drain_all) from [<c00f0c50>] (migrate_prep+0x8/0x10)
+[<c00f0c50>] (migrate_prep) from [<c00ba9d8>] (alloc_contig_range+0xc4/0x2f8)
+[<c00ba9d8>] (alloc_contig_range) from [<c00f27c0>] (cma_alloc+0xd8/0x1a0)
+[<c00f27c0>] (cma_alloc) from [<c001c270>] (__alloc_from_contiguous+0x38/0xdc)
+[<c001c270>] (__alloc_from_contiguous) from [<c001cf38>] (__dma_alloc+0x228/0x2ac)
+[<c001cf38>] (__dma_alloc) from [<c001d040>] (arm_dma_alloc+0x48/0x54)
+[<c001d040>] (arm_dma_alloc) from [<c00ed05c>] (dma_pool_alloc+0x28c/0x304)
+[<c00ed05c>] (dma_pool_alloc) from [<c03fc84c>] (ehci_qh_alloc+0x3c/0xb4)
+[<c03fc84c>] (ehci_qh_alloc) from [<c0400a38>] (ehci_setup+0x154/0x478)
+[<c0400a38>] (ehci_setup) from [<c0404780>] (tegra_ehci_reset+0xc/0x50)
+[<c0404780>] (tegra_ehci_reset) from [<c03e8230>] (usb_add_hcd+0x2fc/0x804)
+[<c03e8230>] (usb_add_hcd) from [<c04040f8>] (tegra_ehci_probe+0x3b8/0x504)
+[<c04040f8>] (tegra_ehci_probe) from [<c0336228>] (platform_drv_probe+0x50/0xac)
+[<c0336228>] (platform_drv_probe) from [<c0334c90>] (driver_probe_device+0x1f4/0x2b0)
+[<c0334c90>] (driver_probe_device) from [<c0333224>] (bus_for_each_drv+0x44/0x8c)
+[<c0333224>] (bus_for_each_drv) from [<c0334a14>] (__device_attach+0x9c/0x100)
+[<c0334a14>] (__device_attach) from [<c03340a0>] (bus_probe_device+0x84/0x8c)
+[<c03340a0>] (bus_probe_device) from [<c03344d4>] (deferred_probe_work_func+0x60/0x8c)
+[<c03344d4>] (deferred_probe_work_func) from [<c003a6b8>] (process_one_work+0x120/0x328)
+[<c003a6b8>] (process_one_work) from [<c003a924>] (worker_thread+0x2c/0x4b4)
+[<c003a924>] (worker_thread) from [<c003fa5c>] (kthread+0xd8/0xf4)
+[<c003fa5c>] (kthread) from [<c000f938>] (ret_from_fork+0x14/0x3c)
+---[ end trace b7e0f81ac0ffa8f2 ]---
 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-07-23 08:34:12 UTC (964341252)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-08 16:44:39 UTC (947349879)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -311,7 +342,7 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 332K (c0965000 - c09b8000)
+Freeing unused kernel memory: 340K (c0981000 - c09d6000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.545468] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.784432] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2016-01-28 03:39:53.963320959 -0800
+++ /tmp/foob	2016-01-28 03:39:53.967320957 -0800
@@ -39,21 +39,22 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ########################################################
+	 #################################################################
+	 #######
 	 3.1 MiB/s
 done
-Bytes transferred = 6544168 (63db28 hex)
+Bytes transferred = 6775528 (6762e8 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 2.1 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 64138 (fa8a hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x63db28 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x6762e8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83012a89
@@ -61,28 +62,29 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.4.0-55855-gafd2ff9 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jan 10 15:33:17 PST 2016
+Linux version 4.5.0-rc1-66887-g92e963f (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jan 28 03:33:07 PST 2016
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
+CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra124 Jetson TK1
 debug: ignoring loglevel setting.
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0fc2400, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c106c440, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-PERCPU: Embedded 12 pages/cpu @eef8f000 s19136 r8192 d21824 u49152
-pcpu-alloc: s19136 r8192 d21824 u49152 alloc=12*4096
+PERCPU: Embedded 12 pages/cpu @eef8f000 s18880 r8192 d22080 u49152
+pcpu-alloc: s18880 r8192 d22080 u49152 alloc=12*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998484K/2096128K available (8239K kernel code, 1040K rwdata, 3736K rodata, 1044K init, 340K bss, 32108K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1997800K/2096128K available (8491K kernel code, 1112K rwdata, 4040K rodata, 1096K init, 345K bss, 32792K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -90,10 +92,10 @@
     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0dbaccc   (11980 kB)
-      .init : 0xc0dbb000 - 0xc0ec0000   (1044 kB)
-      .data : 0xc0ec0000 - 0xc0fc4360   (1041 kB)
-       .bss : 0xc0fc7000 - 0xc101c3e8   ( 341 kB)
+      .text : 0xc0208000 - 0xc0e45cc8   (12536 kB)
+      .init : 0xc0e46000 - 0xc0f58000   (1096 kB)
+      .data : 0xc0f58000 - 0xc106e3c0   (1113 kB)
+       .bss : 0xc1071000 - 0xc10c75a0   ( 346 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -102,6 +104,7 @@
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000
 L2C: failed to init: -19
+Tegra clk 127: register failed with -17
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
 clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
@@ -134,7 +137,6 @@
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
-cpuidle: using governor ladder
 cpuidle: using governor menu
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
@@ -192,14 +194,15 @@
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: emergency thermal reset enabled
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-SuperH (H)SCI(F) driver initialized
-msm_serial: driver initialized
 console [ttyS0] disabled
 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 331, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
 STMicroelectronics ASC driver initialized
 [drm] Initialized drm 1.1.0 20060810
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+brd: module loaded
 loop: module loaded
 at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
 as3722 4-0040: AS3722 with revision 0x1 found
@@ -262,10 +265,7 @@
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc0: Unknown controller version (3). You may experience problems.
-sdhci-tegra 700b0400.sdhci: No vmmc regulator found
 mmc0: Unknown controller version (3). You may experience problems.
-sdhci-tegra 700b0600.sdhci: No vmmc regulator found
-sdhci-tegra 700b0600.sdhci: No vqmmc regulator found
 mmc0: Invalid maximum block size, assuming 512 bytes
 mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
 ledtrig-cpu: registered to indicate activity on CPUs
@@ -286,17 +286,17 @@
 +3.3V_SYS: supplied by +VDD_MUX
 +3.3V_LP0: supplied by +3.3V_SYS
 +1.35V_LP0(sd2): supplied by +5V_SYS
++1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
+tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
 mmc0: MAN_BKOPS_EN bit is not set
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 SEM16G 14.6 GiB 
+tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
+mmc0: new HS200 MMC card at address 0001
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
 Primary GPT is invalid, using alternate GPT.
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
-+1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
-tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
-tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
 tegra-pcie 1003000.pcie-controller: link 0 down, retrying
 tegra-pcie 1003000.pcie-controller: link 0 down, retrying
 tegra-pcie 1003000.pcie-controller: link 0 down, retrying
@@ -327,6 +327,44 @@
 +12V_SATA: supplied by +VDD_MUX
 tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
 tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
+------------[ cut here ]------------
+WARNING: CPU: 1 PID: 6 at kernel/workqueue.c:2361 check_flush_dependency+0xc8/0x124()
+workqueue: WQ_MEM_RECLAIM deferwq:deferred_probe_work_func is flushing !WQ_MEM_RECLAIM events:lru_add_drain_per_cpu
+Modules linked in:
+CPU: 1 PID: 6 Comm: kworker/u8:0 Not tainted 4.5.0-rc1-66887-g92e963f #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+Workqueue: deferwq deferred_probe_work_func
+[<c02188b0>] (unwind_backtrace) from [<c0213f90>] (show_stack+0x10/0x14)
+[<c0213f90>] (show_stack) from [<c04882ac>] (dump_stack+0x78/0x94)
+[<c04882ac>] (dump_stack) from [<c024ab38>] (warn_slowpath_common+0x74/0xb0)
+[<c024ab38>] (warn_slowpath_common) from [<c024ac08>] (warn_slowpath_fmt+0x30/0x40)
+[<c024ac08>] (warn_slowpath_fmt) from [<c025dc20>] (check_flush_dependency+0xc8/0x124)
+[<c025dc20>] (check_flush_dependency) from [<c025dd34>] (flush_work+0x54/0x144)
+[<c025dd34>] (flush_work) from [<c02da1d8>] (lru_add_drain_all+0x124/0x180)
+[<c02da1d8>] (lru_add_drain_all) from [<c030bca0>] (migrate_prep+0x8/0x10)
+[<c030bca0>] (migrate_prep) from [<c02d51f0>] (alloc_contig_range+0xc4/0x2f8)
+[<c02d51f0>] (alloc_contig_range) from [<c030d5cc>] (cma_alloc+0xd8/0x1a0)
+[<c030d5cc>] (cma_alloc) from [<c021e39c>] (__alloc_from_contiguous+0x38/0xdc)
+[<c021e39c>] (__alloc_from_contiguous) from [<c021ff8c>] (__dma_alloc+0x21c/0x250)
+[<c021ff8c>] (__dma_alloc) from [<c0220044>] (arm_dma_alloc+0x48/0x54)
+[<c0220044>] (arm_dma_alloc) from [<c0669918>] (dmam_alloc_coherent+0x8c/0xf0)
+[<c0669918>] (dmam_alloc_coherent) from [<c06c43e4>] (ahci_port_start+0xd0/0x1e0)
+[<c06c43e4>] (ahci_port_start) from [<c06ac28c>] (ata_host_start+0xf8/0x1d4)
+[<c06ac28c>] (ata_host_start) from [<c06b11a8>] (ata_host_activate+0x20/0x134)
+[<c06b11a8>] (ata_host_activate) from [<c06c3860>] (ahci_host_activate+0x3c/0x11c)
+[<c06c3860>] (ahci_host_activate) from [<c06c57a4>] (ahci_platform_init_host+0x1cc/0x3c8)
+[<c06c57a4>] (ahci_platform_init_host) from [<c06c7a08>] (tegra_ahci_probe+0x404/0x4c4)
+[<c06c7a08>] (tegra_ahci_probe) from [<c0658814>] (platform_drv_probe+0x50/0xac)
+[<c0658814>] (platform_drv_probe) from [<c0657180>] (driver_probe_device+0x1f4/0x2b0)
+[<c0657180>] (driver_probe_device) from [<c0655710>] (bus_for_each_drv+0x44/0x8c)
+[<c0655710>] (bus_for_each_drv) from [<c0656f04>] (__device_attach+0x9c/0x100)
+[<c0656f04>] (__device_attach) from [<c0656590>] (bus_probe_device+0x84/0x8c)
+[<c0656590>] (bus_probe_device) from [<c06569c4>] (deferred_probe_work_func+0x60/0x8c)
+[<c06569c4>] (deferred_probe_work_func) from [<c025eb7c>] (process_one_work+0x134/0x338)
+[<c025eb7c>] (process_one_work) from [<c025ede4>] (worker_thread+0x2c/0x4f0)
+[<c025ede4>] (worker_thread) from [<c0263f70>] (kthread+0xd8/0xf4)
+[<c0263f70>] (kthread) from [<c0210e78>] (ret_from_fork+0x14/0x3c)
+---[ end trace 8012fe4dd7ffb31f ]---
 scsi host0: tegra-ahci
 scsi host1: tegra-ahci
 ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 341
@@ -345,7 +383,6 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc1: Unknown controller version (3). You may experience problems.
 +VDDIO_SDMMC3: supplied by +3.3V_RUN
-sdhci-tegra 700b0400.sdhci: No vmmc regulator found
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
@@ -361,12 +398,12 @@
 ata1: SATA link down (SStatus 0 SControl 300)
 EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
 EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
+usb 2-1: new high-speed USB device number 2 using tegra-ehci
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-usb 2-1: new high-speed USB device number 2 using tegra-ehci
 VFS: Mounted root (ext4 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 1044K (c0dbb000 - c0ec0000)
+Freeing unused kernel memory: 1096K (c0e46000 - c0f58000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2016-01-28 03:39:53.971320955 -0800
+++ /tmp/foob	2016-01-28 03:39:53.975320952 -0800
@@ -38,21 +38,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##############################
-	 3.2 MiB/s
+	 #################################
+	 3 MiB/s
 done
-Bytes transferred = 5204120 (4f6898 hex)
+Bytes transferred = 5254256 (502c70 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 2.9 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 64138 (fa8a hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x4f6898 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x502c70 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83012a89
@@ -61,10 +61,9 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Initializing cgroup subsys cpu
-Initializing cgroup subsys cpuacct
-Linux version 4.4.0-55855-gafd2ff9 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jan 10 15:33:33 PST 2016
+Linux version 4.5.0-rc1-66887-g92e963f (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Jan 28 03:33:39 PST 2016
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
+CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra124 Jetson TK1
 debug: ignoring loglevel setting.
@@ -72,20 +71,20 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0a0e780, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0a313c0, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-PERCPU: Embedded 12 pages/cpu @eef8e000 s19392 r8192 d21568 u49152
-pcpu-alloc: s19392 r8192 d21568 u49152 alloc=12*4096
+PERCPU: Embedded 12 pages/cpu @eef8e000 s19136 r8192 d21824 u49152
+pcpu-alloc: s19136 r8192 d21824 u49152 alloc=12*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2002244K/2096128K available (7131K kernel code, 352K rwdata, 2452K rodata, 332K init, 364K bss, 28348K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 2002108K/2096128K available (7212K kernel code, 371K rwdata, 2484K rodata, 340K init, 367K bss, 28484K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -93,15 +92,16 @@
     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc09640d0   (9585 kB)
-      .init : 0xc0965000 - 0xc09b8000   ( 332 kB)
-      .data : 0xc09b8000 - 0xc0a102a0   ( 353 kB)
-       .bss : 0xc0a13000 - 0xc0a6e090   ( 365 kB)
+      .text : 0xc0008000 - 0xc0980680   (9698 kB)
+      .init : 0xc0981000 - 0xc09d6000   ( 340 kB)
+      .data : 0xc09d6000 - 0xc0a32ee0   ( 372 kB)
+       .bss : 0xc0a35000 - 0xc0a90d88   ( 368 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000
 L2C: failed to init: -19
+Tegra clk 127: register failed with -17
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
 clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
@@ -114,8 +114,6 @@
 pid_max: default: 32768 minimum: 301
 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
-Initializing cgroup subsys freezer
-Initializing cgroup subsys debug
 CPU: Testing write buffer coherency: ok
 /cpus/cpu@0 missing clock-frequency property
 /cpus/cpu@1 missing clock-frequency property
@@ -136,7 +134,6 @@
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
-cpuidle: using governor ladder
 cpuidle: using governor menu
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
@@ -256,17 +253,14 @@
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc0: Unknown controller version (3). You may experience problems.
-sdhci-tegra 700b0400.sdhci: No vmmc regulator found
 mmc0: Unknown controller version (3). You may experience problems.
-sdhci-tegra 700b0600.sdhci: No vmmc regulator found
-sdhci-tegra 700b0600.sdhci: No vqmmc regulator found
 mmc0: Invalid maximum block size, assuming 512 bytes
 mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
 mmc0: MAN_BKOPS_EN bit is not set
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 SEM16G 14.6 GiB 
+mmc0: new HS200 MMC card at address 0001
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
@@ -331,6 +325,44 @@
 +12V_SATA: supplied by +VDD_MUX
 tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
 tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
+------------[ cut here ]------------
+WARNING: CPU: 0 PID: 6 at kernel/workqueue.c:2361 check_flush_dependency+0xc8/0x12c()
+workqueue: WQ_MEM_RECLAIM deferwq:deferred_probe_work_func is flushing !WQ_MEM_RECLAIM events:lru_add_drain_per_cpu
+Modules linked in:
+CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.5.0-rc1-66887-g92e963f #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+Workqueue: deferwq deferred_probe_work_func
+[<c0017200>] (unwind_backtrace) from [<c0012870>] (show_stack+0x10/0x14)
+[<c0012870>] (show_stack) from [<c023afa4>] (dump_stack+0x84/0xd0)
+[<c023afa4>] (dump_stack) from [<c0026b78>] (warn_slowpath_common+0x74/0xb0)
+[<c0026b78>] (warn_slowpath_common) from [<c0026c48>] (warn_slowpath_fmt+0x30/0x40)
+[<c0026c48>] (warn_slowpath_fmt) from [<c0039790>] (check_flush_dependency+0xc8/0x12c)
+[<c0039790>] (check_flush_dependency) from [<c00398ac>] (flush_work+0x54/0x11c)
+[<c00398ac>] (flush_work) from [<c00bfe60>] (lru_add_drain_all+0x124/0x180)
+[<c00bfe60>] (lru_add_drain_all) from [<c00f0c50>] (migrate_prep+0x8/0x10)
+[<c00f0c50>] (migrate_prep) from [<c00ba9d8>] (alloc_contig_range+0xc4/0x2f8)
+[<c00ba9d8>] (alloc_contig_range) from [<c00f27c0>] (cma_alloc+0xd8/0x1a0)
+[<c00f27c0>] (cma_alloc) from [<c001c270>] (__alloc_from_contiguous+0x38/0xdc)
+[<c001c270>] (__alloc_from_contiguous) from [<c001cf38>] (__dma_alloc+0x228/0x2ac)
+[<c001cf38>] (__dma_alloc) from [<c001d040>] (arm_dma_alloc+0x48/0x54)
+[<c001d040>] (arm_dma_alloc) from [<c0345200>] (dmam_alloc_coherent+0x8c/0xf0)
+[<c0345200>] (dmam_alloc_coherent) from [<c038b2a8>] (ahci_port_start+0xd0/0x1e0)
+[<c038b2a8>] (ahci_port_start) from [<c0372f80>] (ata_host_start+0xf8/0x1d4)
+[<c0372f80>] (ata_host_start) from [<c0377f14>] (ata_host_activate+0x20/0x134)
+[<c0377f14>] (ata_host_activate) from [<c038a750>] (ahci_host_activate+0x3c/0x11c)
+[<c038a750>] (ahci_host_activate) from [<c038caf8>] (ahci_platform_init_host+0x1cc/0x3c8)
+[<c038caf8>] (ahci_platform_init_host) from [<c038c7c4>] (tegra_ahci_probe+0x404/0x4c4)
+[<c038c7c4>] (tegra_ahci_probe) from [<c0336228>] (platform_drv_probe+0x50/0xac)
+[<c0336228>] (platform_drv_probe) from [<c0334c90>] (driver_probe_device+0x1f4/0x2b0)
+[<c0334c90>] (driver_probe_device) from [<c0333224>] (bus_for_each_drv+0x44/0x8c)
+[<c0333224>] (bus_for_each_drv) from [<c0334a14>] (__device_attach+0x9c/0x100)
+[<c0334a14>] (__device_attach) from [<c03340a0>] (bus_probe_device+0x84/0x8c)
+[<c03340a0>] (bus_probe_device) from [<c03344d4>] (deferred_probe_work_func+0x60/0x8c)
+[<c03344d4>] (deferred_probe_work_func) from [<c003a6b8>] (process_one_work+0x120/0x328)
+[<c003a6b8>] (process_one_work) from [<c003a924>] (worker_thread+0x2c/0x4b4)
+[<c003a924>] (worker_thread) from [<c003fa5c>] (kthread+0xd8/0xf4)
+[<c003fa5c>] (kthread) from [<c000f938>] (ret_from_fork+0x14/0x3c)
+---[ end trace b1416a76f9cd7b89 ]---
 scsi host0: tegra-ahci
 scsi host1: tegra-ahci
 ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 341
@@ -349,11 +381,10 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc1: Unknown controller version (3). You may experience problems.
 +VDDIO_SDMMC3: supplied by +3.3V_RUN
-sdhci-tegra 700b0400.sdhci: No vmmc regulator found
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:53 UTC (946684853)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:50 UTC (946684910)
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
@@ -372,7 +403,7 @@
 VFS: Mounted root (ext4 filesystem) on device 179:1.
 usb 2-1: new high-speed USB device number 2 using tegra-ehci
 devtmpfs: mounted
-Freeing unused kernel memory: 332K (c0965000 - c09b8000)
+Freeing unused kernel memory: 340K (c0981000 - c09d6000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2016-01-28 03:39:53.979320950 -0800
+++ /tmp/foob	2016-01-28 03:39:53.983320947 -0800
@@ -32,7 +32,7 @@
        scanning usb for ethernet devices... 
 Warning: asx0 using MAC address from net device
 1 Ethernet Device(s) found
-Tegra20 (TrimSlice) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug noinitrd earlyprintk init=/bin/bash'
+Tegra20 (TrimSlice) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash'
 Tegra20 (TrimSlice) # setenv ipaddr 192.168.100.103; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
 Tegra20 (TrimSlice) # tftpboot 0x00408000 zImage.multi_v7_defconfig
 Using RTL8169#0 device
@@ -45,10 +45,11 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ########################################################
-	 4 MiB/s
+	 #################################################################
+	 #######
+	 4.1 MiB/s
 done
-Bytes transferred = 6544168 (63db28 hex)
+Bytes transferred = 6775528 (6762e8 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -59,7 +60,7 @@
 done
 Bytes transferred = 21130 (528a hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x63db28 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x6762e8 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 02410289
@@ -67,7 +68,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.4.0-55855-gafd2ff9 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jan 10 15:33:17 PST 2016
+Linux version 4.5.0-rc1-66887-g92e963f (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jan 28 03:33:07 PST 2016
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: Compulab TrimSlice board
@@ -75,20 +76,20 @@
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0fc2400, node_mem_map ef7f8000
+free_area_init_node: node 0, pgdat c106c440, node_mem_map ef7f8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 65536 pages, LIFO batch:15
-PERCPU: Embedded 12 pages/cpu @ef7cb000 s19136 r8192 d21824 u49152
-pcpu-alloc: s19136 r8192 d21824 u49152 alloc=12*4096
+PERCPU: Embedded 12 pages/cpu @ef7cb000 s18880 r8192 d22080 u49152
+pcpu-alloc: s18880 r8192 d22080 u49152 alloc=12*4096
 pcpu-alloc: [0] 0 [0] 1 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
-Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 959400K/1048576K available (8239K kernel code, 1040K rwdata, 3736K rodata, 1044K init, 340K bss, 23640K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 958716K/1048576K available (8491K kernel code, 1112K rwdata, 4040K rodata, 1096K init, 345K bss, 24324K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -96,10 +97,10 @@
     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0dbaccc   (11980 kB)
-      .init : 0xc0dbb000 - 0xc0ec0000   (1044 kB)
-      .data : 0xc0ec0000 - 0xc0fc4360   (1041 kB)
-       .bss : 0xc0fc7000 - 0xc101c3e8   ( 341 kB)
+      .text : 0xc0208000 - 0xc0e45cc8   (12536 kB)
+      .init : 0xc0e46000 - 0xc0f58000   (1096 kB)
+      .data : 0xc0f58000 - 0xc106e3c0   (1113 kB)
+       .bss : 0xc1071000 - 0xc10c75a0   ( 346 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -137,7 +138,6 @@
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
-cpuidle: using governor ladder
 cpuidle: using governor menu
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
@@ -219,11 +219,11 @@
 pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-SuperH (H)SCI(F) driver initialized
-msm_serial: driver initialized
 console [ttyS0] disabled
 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 279, base_baud = 13500000) is a Tegra
 console [ttyS0] enabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
 STMicroelectronics ASC driver initialized
 [drm] Initialized drm 1.1.0 20060810
 54280000.hdmi supply hdmi not found, using dummy regulator
@@ -234,6 +234,7 @@
 Console: switching to colour frame buffer device 128x48
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
+brd: module loaded
 loop: module loaded
 m25p80 spi32766.0: found s25fl008k, expected w25q80bl
 m25p80 spi32766.0: s25fl008k (1024 Kbytes)
@@ -243,7 +244,7 @@
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf085e000, 00:01:c0:13:7d:63, XID 081000c0 IRQ 296
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf0878000, 00:01:c0:13:7d:63, XID 081000c0 IRQ 296
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -294,14 +295,10 @@
 sdhci: Copyright(c) Pierre Ossman
 Synopsys Designware Multimedia Card Interface Driver
 sdhci-pltfm: SDHCI platform and OF driver helper
-sdhci-tegra c8000000.sdhci: No vmmc regulator found
-sdhci-tegra c8000000.sdhci: No vqmmc regulator found
 mmc0: Invalid maximum block size, assuming 512 bytes
 mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci] using ADMA
 sdhci-tegra c8000600.sdhci: Got CD GPIO
 sdhci-tegra c8000600.sdhci: Got WP GPIO
-sdhci-tegra c8000600.sdhci: No vmmc regulator found
-sdhci-tegra c8000600.sdhci: No vqmmc regulator found
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA
 ledtrig-cpu: registered to indicate activity on CPUs
@@ -320,31 +317,31 @@
 Registering SWP/SWPB emulation handler
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
-mmc0: host does not support reading read-only switch, assuming write-enable
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
+mmc0: host does not support reading read-only switch, assuming write-enable
+mmc0: new high speed SDHC card at address b368
+mmcblk0: mmc0:b368 NCard 3.70 GiB 
+ mmcblk0: p1
 usb 1-1: new high-speed USB device number 2 using tegra-ehci
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
+mmc1: new high speed SD card at address b368
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+ mmcblk1: p1 p2
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-rtc-em3027 2-0056: setting system clock to 2014-12-27 05:08:35 UTC (1419656915)
-Waiting for root device /dev/mmcblk0p1...
-mmc0: new high speed SDHC card at address b368
-mmcblk0: mmc0:b368 NCard 3.70 GiB 
- mmcblk0: p1
+rtc-em3027 2-0056: setting system clock to 2014-12-28 05:22:25 UTC (1419744145)
+EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 hub 1-1:1.0: USB hub found
 hub 1-1:1.0: 4 ports detected
-EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-mmc1: new high speed SD card at address b368
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
- mmcblk1: p1 p2
+usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
+asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 1044K (c0dbb000 - c0ec0000)
-usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
+Freeing unused kernel memory: 1096K (c0e46000 - c0f58000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2016-01-28 03:39:53.991320943 -0800
+++ /tmp/foob	2016-01-28 03:39:53.991320943 -0800
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -32,7 +32,7 @@
        scanning usb for ethernet devices... 
 Warning: asx0 using MAC address from net device
 1 Ethernet Device(s) found
-Tegra20 (TrimSlice) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug noinitrd earlyprintk init=/bin/bash'
+Tegra20 (TrimSlice) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash'
 Tegra20 (TrimSlice) # setenv ipaddr 192.168.100.103; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
 Tegra20 (TrimSlice) # tftpboot 0x00408000 zImage.tegra_defconfig
 Using RTL8169#0 device
@@ -44,21 +44,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##############################
-	 4 MiB/s
+	 #################################
+	 3.5 MiB/s
 done
-Bytes transferred = 5204120 (4f6898 hex)
+Bytes transferred = 5254256 (502c70 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 3.4 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 21130 (528a hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x4f6898 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x502c70 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 02410289
@@ -67,9 +67,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Initializing cgroup subsys cpu
-Initializing cgroup subsys cpuacct
-Linux version 4.4.0-55855-gafd2ff9 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jan 10 15:33:33 PST 2016
+Linux version 4.5.0-rc1-66887-g92e963f (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Jan 28 03:33:39 PST 2016
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: Compulab TrimSlice board
@@ -78,20 +76,20 @@
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0a0e780, node_mem_map ef7f7000
+free_area_init_node: node 0, pgdat c0a313c0, node_mem_map ef7f7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 65536 pages, LIFO batch:15
-PERCPU: Embedded 12 pages/cpu @ef7ca000 s19392 r8192 d21568 u49152
-pcpu-alloc: s19392 r8192 d21568 u49152 alloc=12*4096
+PERCPU: Embedded 12 pages/cpu @ef7ca000 s19136 r8192 d21824 u49152
+pcpu-alloc: s19136 r8192 d21824 u49152 alloc=12*4096
 pcpu-alloc: [0] 0 [0] 1 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260608
-Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 963160K/1048576K available (7131K kernel code, 352K rwdata, 2452K rodata, 332K init, 364K bss, 19880K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 963024K/1048576K available (7212K kernel code, 371K rwdata, 2484K rodata, 340K init, 367K bss, 20016K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -99,10 +97,10 @@
     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc09640d0   (9585 kB)
-      .init : 0xc0965000 - 0xc09b8000   ( 332 kB)
-      .data : 0xc09b8000 - 0xc0a102a0   ( 353 kB)
-       .bss : 0xc0a13000 - 0xc0a6e090   ( 365 kB)
+      .text : 0xc0008000 - 0xc0980680   (9698 kB)
+      .init : 0xc0981000 - 0xc09d6000   ( 340 kB)
+      .data : 0xc09d6000 - 0xc0a32ee0   ( 372 kB)
+       .bss : 0xc0a35000 - 0xc0a90d88   ( 368 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
@@ -125,8 +123,6 @@
 pid_max: default: 32768 minimum: 301
 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
-Initializing cgroup subsys freezer
-Initializing cgroup subsys debug
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
 Setting up static identity map for 0x8440 - 0x84d8
@@ -141,7 +137,6 @@
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
-cpuidle: using governor ladder
 cpuidle: using governor menu
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
@@ -290,14 +285,10 @@
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
-sdhci-tegra c8000000.sdhci: No vmmc regulator found
-sdhci-tegra c8000000.sdhci: No vqmmc regulator found
 mmc0: Invalid maximum block size, assuming 512 bytes
 mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci] using ADMA
 sdhci-tegra c8000600.sdhci: Got CD GPIO
 sdhci-tegra c8000600.sdhci: Got WP GPIO
-sdhci-tegra c8000600.sdhci: No vmmc regulator found
-sdhci-tegra c8000600.sdhci: No vqmmc regulator found
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA
 usbcore: registered new interface driver usbhid
@@ -311,15 +302,13 @@
 tlv320aic23-codec 2-001a: Control not supported for path MICIN -> [NULL] -> Mic Input
 tlv320aic23-codec 2-001a: ASoC: no dapm match for MICIN --> NULL --> Mic Input
 tlv320aic23-codec 2-001a: ASoC: Failed to add route MICIN -> NULL -> Mic Input
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
 tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok
-mmc0: host does not support reading read-only switch, assuming write-enable
-mmc0: new high speed SDHC card at address b368
-mmcblk0: mmc0:b368 NCard 3.70 GiB 
- mmcblk0: p1
 NET: Registered protocol family 10
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
 mip6: Mobile IPv6
 sit: IPv6 over IPv4 tunneling driver
+mmc0: host does not support reading read-only switch, assuming write-enable
+mmc0: new high speed SDHC card at address b368
 NET: Registered protocol family 17
 NET: Registered protocol family 15
 can: controller area network core (rev 20120528 abi 9)
@@ -328,36 +317,39 @@
 can: broadcast manager protocol (rev 20120528 t)
 can: netlink gateway (rev 20130117) max_hops=1
 Bluetooth: RFCOMM socket layer initialized
+mmc1: new high speed SD card at address b368
 Bluetooth: RFCOMM ver 1.11
+mmcblk0: mmc0:b368 NCard 3.70 GiB 
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+ mmcblk0: p1
+ mmcblk1: p1 p2
 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
 Bluetooth: BNEP socket layer initialized
 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
 Bluetooth: HIDP socket layer initialized
 Key type dns_resolver registered
 Registering SWP/SWPB emulation handler
-mmc1: new high speed SD card at address b368
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
- mmcblk1: p1 p2
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
+tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 1-1:1.0: USB hub found
 hub 1-1:1.0: 4 ports detected
-tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-rtc-em3027 2-0056: setting system clock to 2014-12-27 05:08:55 UTC (1419656935)
+rtc-em3027 2-0056: setting system clock to 2014-12-28 05:23:26 UTC (1419744206)
 ALSA device list:
   #0: tegra-trimslice
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
+usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
+asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 332K (c0965000 - c09b8000)
-usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
+Freeing unused kernel memory: 340K (c0981000 - c09d6000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	1969-12-31 16:00:00.000000000 -0800
+++ /tmp/foob	2016-01-28 03:39:53.999320937 -0800
@@ -0,0 +1,325 @@
+[TegraBoot] (version 23.00.2015.14-mobile-1ef66670)
+Processing in cold boot mode Bootloader 2
+A01Q Bootrom Patch rev = 3
+Power-up reason: on button
+No Battery Present
+Platform has Ddr4 type ram
+max77620 disabling SD1 Remote Sense
+Setting Ddr voltage to 1125mv
+Serial Number of Pmic Max77663: 0x40daf
+Entering ramdump check
+Get RamDumpCarveOut = 0x0
+RamDumpCarveOut=0x0,  RamDumperFlag=0xe59ff3f8
+Last reboot was clean, booting normally!
+Sdram initialization is successful 
+SecureOs Carveout Base=0xff800000 Size=0x00800000
+GSC1 Carveout Base=0xff700000 Size=0x00100000
+GSC2 Carveout Base=0xff600000 Size=0x00100000
+GSC3 Carveout Base=0xff500000 Size=0x00100000
+GSC4 Carveout Base=0xff400000 Size=0x00100000
+GSC5 Carveout Base=0xff300000 Size=0x00100000
+BpmpFw Carveout Base=0xff2c0000 Size=0x00040000
+Lp0 Carveout Base=0xff2bf000 Size=0x00001000
+RamDump Carveout Base=0xff23f000 Size=0x00080000
+Platform-DebugCarveout: 0
+Nck Carveout Base=0xff03f000 Size=0x00200000
+Using GPT Primary to query partitions 
+Loading Tboot-CPU binary
+Verifying bootloader in OdmNonSecureSBK mode
+Bootloader load address is 0xa0000000,                            entry address is 0xa0000258
+Bootloader downloaded successfully.
+Downloaded Tboot-CPU binary to 0xa0000258
+MAX77620_GPIO1 Configured.
+MAX77620_GPIO5 Configured.
+CPU power rail is up
+CPU clock enabled
+Performing RAM repair
+Updating A64 Warmreset Address to 0xa00002e9
+Bootloader DTB Load Address: 0x83000000
+Kernel DTB Load Address: 0x83080000
+Loading cboot binary
+Verifying bootloader in OdmNonSecureSBK mode
+Bootloader load address is 0x8010fda8,                            entry address is 0x80110000
+Bootloader downloaded successfully.
+GPT: Partition NOT found ! 
+Find Partition via GPT Failed
+function NvTbootGetBinaryOffsets: 0x845208 error
+Error in NvTbootLoadBinary: 0x845208 !
+GPT: Partition NOT found ! 
+No FB partition
+Next binary entry address: 0x80110000 
+BoardId: 2595
+dram memory type is 3
+WB0 init successful
+Bpmp FW successfully loaded
+Set NvDecSticky Bits
+GSC1 address : ff700000
+GSC2 address : ff600000
+GSC3 address : ff500000
+GSC4 address : ff400000
+GSC5 address : ff300000
+GSC MC Settings done
+TOS old plaintext Image length 61440
+*** Secure OS image signature not verified ***
+Loading and Validation of Secure OS Successful
+NvTbootPackSdramParams: start. 
+NvTbootPackSdramParams: done. 
+Tegraboot started after 775425 us
+Basic modules init took 348212 us
+Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
+Next stage binary read took 14365 us
+Carveout took 252747 us
+CPU initialization took 92336 us
+Total time taken by TegraBoot 707660 us
+
+Starting CPU & Halting co-processor 
+
+64b[0001.613] LPDDR4 Training: Number of tables = 10
+EMC Training (SRC-freq: 204000; DST-freq: 408000)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 665600)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 800000)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 1065600)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 1331200)
+EMC Training Successful
+EMC Training (SRC-freq: 204000; DST-freq: 1600000)
+EMC Training Successful
+Switching to 800000 KHz Success
+LPDDR4 Training: Number of tables = 10
+
+
+U-Boot 2015.07-rc2-g2ac3917 (Nov 09 2015 - 13:12:08 -0800)
+
+TEGRA210
+Model: NVIDIA P2371-0000
+DRAM:  3 GiB
+MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+*** Warning - bad CRC, using default environment
+
+In:    serial
+Out:   serial
+Err:   serial
+Net:   Net Initialization Skipped
+No ethernet found.
+Hit any key to stop autoboot:  2  0 
+Tegra210 (P2371-0000) # 
+Tegra210 (P2371-0000) # ums 0 mmc 0
+UMS: disk start sector: 0x0, count: 0x1d5a000
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
+Tegra210 (P2371-0000) # 
+Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
+Tegra210 (P2371-0000) # setenv rootpart 1
+Tegra210 (P2371-0000) # setenv devtype mmc
+Tegra210 (P2371-0000) # setenv devnum 0
+Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
+Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=/dev/mmcblk0p1 rootwait debug earlyprintk init=/bin/bash
+Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
+10215424 bytes read in 686 ms (14.2 MiB/s)
+Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
+37136 bytes read in 460 ms (78.1 KiB/s)
+Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
+1627787 bytes read in 494 ms (3.1 MiB/s)
+Tegra210 (P2371-0000) # ramdisk_size=${filesize}
+Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
+## Flattened Device Tree blob at 82000000
+   Booting using the fdt blob at 0x82000000
+   Using Device Tree in place at 0000000082000000, end 000000008200c10f
+
+Starting kernel ...
+
+Booting Linux on physical CPU 0x0
+Linux version 4.5.0-rc1+ (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Thu Jan 28 03:34:51 PST 2016
+Boot CPU: AArch64 Processor [411fd071]
+debug: ignoring loglevel setting.
+earlycon: Early serial console at MMIO32 0x70006000 (options '')
+bootconsole [uart0] enabled
+efi: Getting EFI parameters from FDT:
+efi: UEFI not found.
+cma: Reserved 16 MiB at 0x00000000fe000000
+On node 0 totalpages: 782848
+  DMA zone: 8192 pages used for memmap
+  DMA zone: 0 pages reserved
+  DMA zone: 520704 pages, LIFO batch:31
+  Normal zone: 4096 pages used for memmap
+  Normal zone: 262144 pages, LIFO batch:31
+psci: probing for conduit method from DT.
+psci: PSCIv0.2 detected in firmware.
+psci: Using standard PSCI v0.2 function IDs
+psci: MIGRATE_INFO_TYPE not supported.
+PERCPU: Embedded 20 pages/cpu @ffffffc0bff61000 s41216 r8192 d32512 u81920
+pcpu-alloc: s41216 r8192 d32512 u81920 alloc=20*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
+Detected PIPT I-cache on CPU0
+CPU features: enabling workaround for ARM erratum 832075
+CPU features: enabling workaround for ARM erratum 834220
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 770560
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=/dev/mmcblk0p1 rootwait debug earlyprintk init=/bin/bash
+log_buf_len individual max cpu contribution: 4096 bytes
+log_buf_len total cpu_extra contributions: 12288 bytes
+log_buf_len min size: 16384 bytes
+log_buf_len: 32768 bytes
+early log buf free: 14320(87%)
+PID hash table entries: 4096 (order: 3, 32768 bytes)
+Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
+Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
+software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [ffffffc07a000000-ffffffc07dffffff]
+Memory: 2982788K/3131392K available (5956K kernel code, 572K rwdata, 2744K rodata, 692K init, 221K bss, 132220K reserved, 16384K cma-reserved)
+Virtual kernel memory layout:
+    vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000   (   246 GB)
+    vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
+              0xffffffbdc2000000 - 0xffffffbdc5000000   (    48 MB actual)
+    fixed   : 0xffffffbffa7fd000 - 0xffffffbffac00000   (  4108 KB)
+    PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000   (    16 MB)
+    modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
+    memory  : 0xffffffc000000000 - 0xffffffc0c0000000   (  3072 MB)
+      .init : 0xffffffc000902000 - 0xffffffc0009af000   (   692 KB)
+      .text : 0xffffffc000080000 - 0xffffffc000901224   (  8709 KB)
+      .data : 0xffffffc0009af000 - 0xffffffc000a3e000   (   572 KB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+Preemptible hierarchical RCU implementation.
+	Build-time adjustment of leaf fanout to 64.
+	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
+RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
+NR_IRQS:64 nr_irqs:64 0
+GIC: Using split EOI/Deactivate mode
+/interrupt-controller@0,60004000: 192 interrupts forwarded to /interrupt-controller@0,50041000
+PLL_MB already enabled. Postponing set full defaults
+PLL_U already enabled. Postponing set full defaults
+PLL_P already enabled. Postponing set full defaults
+PLL_X already enabled. Postponing set full defaults
+boot misc1 0x0: expected 0x20
+ (comparison mask = 0xffffff)
+Architected cp15 timer(s) running at 19.20MHz (phys).
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
+sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
+Console: colour dummy device 80x25
+Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
+pid_max: default: 32768 minimum: 301
+Security Framework initialized
+Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
+Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
+ASID allocator initialised with 65536 entries
+Speedo Revision 4
+Tegra Revision: A01 SKU: 1 CPU Process: -22 SoC Process: -22
+EFI services will not be available.
+Detected PIPT I-cache on CPU1
+CPU1: Booted secondary processor [411fd071]
+Detected PIPT I-cache on CPU2
+CPU2: Booted secondary processor [411fd071]
+Detected PIPT I-cache on CPU3
+CPU3: Booted secondary processor [411fd071]
+Brought up 4 CPUs
+SMP: Total of 4 processors activated.
+CPU: All CPU(s) started at EL2
+alternatives: patching kernel code
+devtmpfs: initialized
+DMI not present or invalid.
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+cpuidle: using governor menu
+vdso: 2 pages (1 code @ ffffffc0009b5000, 1 data @ ffffffc0009b4000)
+hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
+DMA: preallocated 256 KiB pool for atomic allocations
+Serial: AMBA PL011 UART driver
+HugeTLB registered 2 MB page size, pre-allocated 0 pages
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+dmi: Firmware registration failed.
+Advanced Linux Sound Architecture Driver Initialized.
+clocksource: Switched to clocksource arch_sys_counter
+VFS: Disk quotas dquot_6.6.0
+VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+NET: Registered protocol family 2
+TCP established hash table entries: 32768 (order: 6, 262144 bytes)
+TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
+TCP: Hash tables configured (established 32768 bind 32768)
+UDP hash table entries: 2048 (order: 4, 65536 bytes)
+UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 128
+kvm [1]: interrupt-controller@50044000 IRQ9
+kvm [1]: timer IRQ3
+kvm [1]: 8-bit VMID
+kvm [1]: Hyp mode initialized successfully
+futex hash table entries: 1024 (order: 5, 131072 bytes)
+audit: initializing netlink subsys (disabled)
+audit: type=2000 audit(0.415:1): initialized
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+fuse init (API version 7.24)
+9p: Installing v9fs 9p2000 file system support
+io scheduler noop registered
+io scheduler cfq registered (default)
+tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+console [ttyS0] disabled
+70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 312, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+console [ttyS0] enabled
+bootconsole [uart0] disabled
+bootconsole [uart0] disabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
+Unable to detect cache hierarchy from DT for CPU 0
+loop: module loaded
+tun: Universal TUN/TAP device driver, 1.6
+tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
+sky2: driver version 1.30
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+usbcore: registered new interface driver usb-storage
+mousedev: PS/2 mouse device common for all mice
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+NET: Registered protocol family 17
+9pnet: Installing 9P2000 support
+Key type dns_resolver registered
+registered taskstats version 1
+hctosys: unable to open rtc device (rtc0)
+ALSA device list:
+  No soundcards found.
+Waiting for root device /dev/mmcblk0p1...
+mmc0: MAN_BKOPS_EN bit is not set
+mmc0: new HS200 MMC card at address 0001
+mmcblk0: mmc0:0001 SDW16G 14.7 GiB 
+mmcblk0boot0: mmc0:0001 SDW16G partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 SDW16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SDW16G partition 3 4.00 MiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18
+EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
+EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 692K (ffffffc000902000 - ffffffc0009af000)
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2016-01-28 03:39:54.003320936 -0800
+++ /tmp/foob	2016-01-28 03:39:54.007320934 -0800
@@ -37,10 +37,11 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ########################################################
-	 3.4 MiB/s
+	 #################################################################
+	 #######
+	 3.3 MiB/s
 done
-Bytes transferred = 6544168 (63db28 hex)
+Bytes transferred = 6775528 (6762e8 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -51,7 +52,7 @@
 done
 Bytes transferred = 51467 (c90b hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x63db28 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x6762e8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90a ... OK
@@ -59,7 +60,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.4.0-55855-gafd2ff9 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jan 10 15:33:17 PST 2016
+Linux version 4.5.0-rc1-66887-g92e963f (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jan 28 03:33:07 PST 2016
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -67,20 +68,20 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0fc2400, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c106c440, node_mem_map eeff8000
   DMA zone: 1536 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-PERCPU: Embedded 12 pages/cpu @eef93000 s19136 r8192 d21824 u49152
-pcpu-alloc: s19136 r8192 d21824 u49152 alloc=12*4096
+PERCPU: Embedded 12 pages/cpu @eef93000 s18880 r8192 d22080 u49152
+pcpu-alloc: s18880 r8192 d22080 u49152 alloc=12*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998512K/2096128K available (8239K kernel code, 1040K rwdata, 3736K rodata, 1044K init, 340K bss, 32080K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1997828K/2096128K available (8491K kernel code, 1112K rwdata, 4040K rodata, 1096K init, 345K bss, 32764K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -88,10 +89,10 @@
     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0dbaccc   (11980 kB)
-      .init : 0xc0dbb000 - 0xc0ec0000   (1044 kB)
-      .data : 0xc0ec0000 - 0xc0fc4360   (1041 kB)
-       .bss : 0xc0fc7000 - 0xc101c3e8   ( 341 kB)
+      .text : 0xc0208000 - 0xc0e45cc8   (12536 kB)
+      .init : 0xc0e46000 - 0xc0f58000   (1096 kB)
+      .data : 0xc0f58000 - 0xc106e3c0   (1113 kB)
+       .bss : 0xc1071000 - 0xc10c75a0   ( 346 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
@@ -131,7 +132,6 @@
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
-cpuidle: using governor ladder
 cpuidle: using governor menu
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
@@ -203,14 +203,15 @@
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-SuperH (H)SCI(F) driver initialized
-msm_serial: driver initialized
 console [ttyS0] disabled
 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
+SuperH (H)SCI(F) driver initialized
+msm_serial: driver initialized
 STMicroelectronics ASC driver initialized
 [drm] Initialized drm 1.1.0 20060810
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+brd: module loaded
 loop: module loaded
 m25p80 spi32766.1: w25q32 (4096 Kbytes)
 libphy: Fixed MDIO Bus: probed
@@ -257,12 +258,8 @@
 sdhci-pltfm: SDHCI platform and OF driver helper
 sdhci-tegra 78000000.sdhci: Got CD GPIO
 sdhci-tegra 78000000.sdhci: Got WP GPIO
-sdhci-tegra 78000000.sdhci: No vmmc regulator found
-sdhci-tegra 78000000.sdhci: No vqmmc regulator found
 mmc0: Invalid maximum block size, assuming 512 bytes
 mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA
-sdhci-tegra 78000600.sdhci: No vmmc regulator found
-sdhci-tegra 78000600.sdhci: No vqmmc regulator found
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
 ledtrig-cpu: registered to indicate activity on CPUs
@@ -288,9 +285,9 @@
 mmcblk0boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
 mmcblk0boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
 mmcblk0rpmb: mmc1:0001 SEM16G partition 3 128 KiB
-tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
 Primary GPT is invalid, using alternate GPT.
  mmcblk0: p1 p2 p3 p4 p5
+tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
@@ -327,7 +324,7 @@
 pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08d6000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 vdd_1v8_gen: supplied by vdd_5v_in
@@ -342,6 +339,43 @@
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci 7d004000.usb: EHCI Host Controller
 tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
+------------[ cut here ]------------
+WARNING: CPU: 1 PID: 6 at kernel/workqueue.c:2361 check_flush_dependency+0xc8/0x124()
+workqueue: WQ_MEM_RECLAIM deferwq:deferred_probe_work_func is flushing !WQ_MEM_RECLAIM events:lru_add_drain_per_cpu
+Modules linked in:
+CPU: 1 PID: 6 Comm: kworker/u8:0 Not tainted 4.5.0-rc1-66887-g92e963f #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+Workqueue: deferwq deferred_probe_work_func
+[<c02188b0>] (unwind_backtrace) from [<c0213f90>] (show_stack+0x10/0x14)
+[<c0213f90>] (show_stack) from [<c04882ac>] (dump_stack+0x78/0x94)
+[<c04882ac>] (dump_stack) from [<c024ab38>] (warn_slowpath_common+0x74/0xb0)
+[<c024ab38>] (warn_slowpath_common) from [<c024ac08>] (warn_slowpath_fmt+0x30/0x40)
+[<c024ac08>] (warn_slowpath_fmt) from [<c025dc20>] (check_flush_dependency+0xc8/0x124)
+[<c025dc20>] (check_flush_dependency) from [<c025dd34>] (flush_work+0x54/0x144)
+[<c025dd34>] (flush_work) from [<c02da1d8>] (lru_add_drain_all+0x124/0x180)
+[<c02da1d8>] (lru_add_drain_all) from [<c030bca0>] (migrate_prep+0x8/0x10)
+[<c030bca0>] (migrate_prep) from [<c02d51f0>] (alloc_contig_range+0xc4/0x2f8)
+[<c02d51f0>] (alloc_contig_range) from [<c030d5cc>] (cma_alloc+0xd8/0x1a0)
+[<c030d5cc>] (cma_alloc) from [<c021e39c>] (__alloc_from_contiguous+0x38/0xdc)
+[<c021e39c>] (__alloc_from_contiguous) from [<c021ff8c>] (__dma_alloc+0x21c/0x250)
+[<c021ff8c>] (__dma_alloc) from [<c0220044>] (arm_dma_alloc+0x48/0x54)
+[<c0220044>] (arm_dma_alloc) from [<c03061f0>] (dma_pool_alloc+0x1dc/0x210)
+[<c03061f0>] (dma_pool_alloc) from [<c07c6694>] (ehci_qh_alloc+0x3c/0xb4)
+[<c07c6694>] (ehci_qh_alloc) from [<c07cac8c>] (ehci_setup+0x154/0x478)
+[<c07cac8c>] (ehci_setup) from [<c07d0d44>] (tegra_ehci_reset+0xc/0x50)
+[<c07d0d44>] (tegra_ehci_reset) from [<c07a1108>] (usb_add_hcd+0x300/0x830)
+[<c07a1108>] (usb_add_hcd) from [<c07d06bc>] (tegra_ehci_probe+0x3b8/0x504)
+[<c07d06bc>] (tegra_ehci_probe) from [<c0658814>] (platform_drv_probe+0x50/0xac)
+[<c0658814>] (platform_drv_probe) from [<c0657180>] (driver_probe_device+0x1f4/0x2b0)
+[<c0657180>] (driver_probe_device) from [<c0655710>] (bus_for_each_drv+0x44/0x8c)
+[<c0655710>] (bus_for_each_drv) from [<c0656f04>] (__device_attach+0x9c/0x100)
+[<c0656f04>] (__device_attach) from [<c0656590>] (bus_probe_device+0x84/0x8c)
+[<c0656590>] (bus_probe_device) from [<c06569c4>] (deferred_probe_work_func+0x60/0x8c)
+[<c06569c4>] (deferred_probe_work_func) from [<c025eb7c>] (process_one_work+0x134/0x338)
+[<c025eb7c>] (process_one_work) from [<c025ede4>] (worker_thread+0x2c/0x4f0)
+[<c025ede4>] (worker_thread) from [<c0263f70>] (kthread+0xd8/0xf4)
+[<c0263f70>] (kthread) from [<c0210e78>] (ret_from_fork+0x14/0x3c)
+---[ end trace d4ffcf5922812202 ]---
 tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000
 tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00
 hub 1-0:1.0: USB hub found
@@ -361,7 +395,7 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 1044K (c0dbb000 - c0ec0000)
+Freeing unused kernel memory: 1096K (c0e46000 - c0f58000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.733410] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.003907] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2016-01-28 03:39:54.011320931 -0800
+++ /tmp/foob	2016-01-28 03:39:54.015320928 -0800
@@ -36,21 +36,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##############################
-	 3.3 MiB/s
+	 #################################
+	 2.8 MiB/s
 done
-Bytes transferred = 5204120 (4f6898 hex)
+Bytes transferred = 5254256 (502c70 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.1 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 51467 (c90b hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x4f6898 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x502c70 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90a ... OK
@@ -59,9 +59,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Initializing cgroup subsys cpu
-Initializing cgroup subsys cpuacct
-Linux version 4.4.0-55855-gafd2ff9 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jan 10 15:33:33 PST 2016
+Linux version 4.5.0-rc1-66887-g92e963f (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Jan 28 03:33:39 PST 2016
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -70,20 +68,20 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0a0e780, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0a313c0, node_mem_map eeff7000
   Normal zone: 1536 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
-PERCPU: Embedded 12 pages/cpu @eef92000 s19392 r8192 d21568 u49152
-pcpu-alloc: s19392 r8192 d21568 u49152 alloc=12*4096
+PERCPU: Embedded 12 pages/cpu @eef92000 s19136 r8192 d21824 u49152
+pcpu-alloc: s19136 r8192 d21824 u49152 alloc=12*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2002272K/2096128K available (7131K kernel code, 352K rwdata, 2452K rodata, 332K init, 364K bss, 28320K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 2002136K/2096128K available (7212K kernel code, 371K rwdata, 2484K rodata, 340K init, 367K bss, 28456K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -91,10 +89,10 @@
     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc09640d0   (9585 kB)
-      .init : 0xc0965000 - 0xc09b8000   ( 332 kB)
-      .data : 0xc09b8000 - 0xc0a102a0   ( 353 kB)
-       .bss : 0xc0a13000 - 0xc0a6e090   ( 365 kB)
+      .text : 0xc0008000 - 0xc0980680   (9698 kB)
+      .init : 0xc0981000 - 0xc09d6000   ( 340 kB)
+      .data : 0xc09d6000 - 0xc0a32ee0   ( 372 kB)
+       .bss : 0xc0a35000 - 0xc0a90d88   ( 368 kB)
 Preemptible hierarchical RCU implementation.
 	Build-time adjustment of leaf fanout to 32.
 NR_IRQS:16 nr_irqs:16 16
@@ -115,8 +113,6 @@
 pid_max: default: 32768 minimum: 301
 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
-Initializing cgroup subsys freezer
-Initializing cgroup subsys debug
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
 Setting up static identity map for 0x80008440 - 0x800084d8
@@ -133,7 +129,6 @@
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
-cpuidle: using governor ladder
 cpuidle: using governor menu
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
@@ -252,12 +247,8 @@
 sdhci-pltfm: SDHCI platform and OF driver helper
 sdhci-tegra 78000000.sdhci: Got CD GPIO
 sdhci-tegra 78000000.sdhci: Got WP GPIO
-sdhci-tegra 78000000.sdhci: No vmmc regulator found
-sdhci-tegra 78000000.sdhci: No vqmmc regulator found
 mmc0: Invalid maximum block size, assuming 512 bytes
 mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA
-sdhci-tegra 78000600.sdhci: No vmmc regulator found
-sdhci-tegra 78000600.sdhci: No vqmmc regulator found
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
 usbcore: registered new interface driver usbhid
@@ -331,7 +322,7 @@
 pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08b6000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 vdd_1v8_gen: supplied by vdd_5v_in
@@ -346,6 +337,43 @@
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci 7d004000.usb: EHCI Host Controller
 tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
+------------[ cut here ]------------
+WARNING: CPU: 2 PID: 76 at kernel/workqueue.c:2361 check_flush_dependency+0xc8/0x12c()
+workqueue: WQ_MEM_RECLAIM deferwq:deferred_probe_work_func is flushing !WQ_MEM_RECLAIM events:lru_add_drain_per_cpu
+Modules linked in:
+CPU: 2 PID: 76 Comm: kworker/u8:1 Not tainted 4.5.0-rc1-66887-g92e963f #1
+Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
+Workqueue: deferwq deferred_probe_work_func
+[<c0017200>] (unwind_backtrace) from [<c0012870>] (show_stack+0x10/0x14)
+[<c0012870>] (show_stack) from [<c023afa4>] (dump_stack+0x84/0xd0)
+[<c023afa4>] (dump_stack) from [<c0026b78>] (warn_slowpath_common+0x74/0xb0)
+[<c0026b78>] (warn_slowpath_common) from [<c0026c48>] (warn_slowpath_fmt+0x30/0x40)
+[<c0026c48>] (warn_slowpath_fmt) from [<c0039790>] (check_flush_dependency+0xc8/0x12c)
+[<c0039790>] (check_flush_dependency) from [<c00398ac>] (flush_work+0x54/0x11c)
+[<c00398ac>] (flush_work) from [<c00bfe60>] (lru_add_drain_all+0x124/0x180)
+[<c00bfe60>] (lru_add_drain_all) from [<c00f0c50>] (migrate_prep+0x8/0x10)
+[<c00f0c50>] (migrate_prep) from [<c00ba9d8>] (alloc_contig_range+0xc4/0x2f8)
+[<c00ba9d8>] (alloc_contig_range) from [<c00f27c0>] (cma_alloc+0xd8/0x1a0)
+[<c00f27c0>] (cma_alloc) from [<c001c270>] (__alloc_from_contiguous+0x38/0xdc)
+[<c001c270>] (__alloc_from_contiguous) from [<c001cf38>] (__dma_alloc+0x228/0x2ac)
+[<c001cf38>] (__dma_alloc) from [<c001d040>] (arm_dma_alloc+0x48/0x54)
+[<c001d040>] (arm_dma_alloc) from [<c00ed05c>] (dma_pool_alloc+0x28c/0x304)
+[<c00ed05c>] (dma_pool_alloc) from [<c03fc84c>] (ehci_qh_alloc+0x3c/0xb4)
+[<c03fc84c>] (ehci_qh_alloc) from [<c0400a38>] (ehci_setup+0x154/0x478)
+[<c0400a38>] (ehci_setup) from [<c0404780>] (tegra_ehci_reset+0xc/0x50)
+[<c0404780>] (tegra_ehci_reset) from [<c03e8230>] (usb_add_hcd+0x2fc/0x804)
+[<c03e8230>] (usb_add_hcd) from [<c04040f8>] (tegra_ehci_probe+0x3b8/0x504)
+[<c04040f8>] (tegra_ehci_probe) from [<c0336228>] (platform_drv_probe+0x50/0xac)
+[<c0336228>] (platform_drv_probe) from [<c0334c90>] (driver_probe_device+0x1f4/0x2b0)
+[<c0334c90>] (driver_probe_device) from [<c0333224>] (bus_for_each_drv+0x44/0x8c)
+[<c0333224>] (bus_for_each_drv) from [<c0334a14>] (__device_attach+0x9c/0x100)
+[<c0334a14>] (__device_attach) from [<c03340a0>] (bus_probe_device+0x84/0x8c)
+[<c03340a0>] (bus_probe_device) from [<c03344d4>] (deferred_probe_work_func+0x60/0x8c)
+[<c03344d4>] (deferred_probe_work_func) from [<c003a6b8>] (process_one_work+0x120/0x328)
+[<c003a6b8>] (process_one_work) from [<c003a924>] (worker_thread+0x2c/0x4b4)
+[<c003a924>] (worker_thread) from [<c003fa5c>] (kthread+0xd8/0xf4)
+[<c003fa5c>] (kthread) from [<c000f938>] (ret_from_fork+0x14/0x3c)
+---[ end trace 6753cc5c5abd4b03 ]---
 tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000
 tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00
 hub 1-0:1.0: USB hub found
@@ -367,7 +395,8 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 332K (c0965000 - c09b8000)
+Freeing unused kernel memory: 340K (c0981000 - c09d6000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.160570] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# 
\ No newline at end of file
