U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) TEGRA30 Board: NVIDIA Beaver I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra30 (Beaver) # Tegra30 (Beaver) # usb reset (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra30 (Beaver) # tftpboot 0x81000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################################## 3.5 MiB/s done Bytes transferred = 6541120 (63cf40 hex) Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'tegra30-beaver.dtb'. Load address: 0x82000000 Loading: *#### 3.3 MiB/s done Bytes transferred = 51467 (c90b hex) Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x63cf40 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8fff0000, end 8ffff90a ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.0-rc4-54993-g527e931 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Dec 10 05:33:01 PST 2015 [ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: NVIDIA Tegra30 Beaver evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c0fc2200, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 12 pages/cpu @eef93000 s19136 r8192 d21824 u49152 [ 0.000000] pcpu-alloc: s19136 r8192 d21824 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998512K/2096128K available (8239K kernel code, 1040K rwdata, 3736K rodata, 1044K init, 340K bss, 32080K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0dbac70 (11980 kB) [ 0.000000] .init : 0xc0dbb000 - 0xc0ec0000 (1044 kB) [ 0.000000] .data : 0xc0ec0000 - 0xc0fc4160 (1041 kB) [ 0.000000] .bss : 0xc0fc7000 - 0xc101c3e8 ( 341 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9 [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 8 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e480001 [ 0.000015] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000033] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000041] Switching to timer-based delay loop, resolution 1000ns [ 0.002742] Console: colour dummy device 80x30 [ 0.002766] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=5000) [ 0.002775] pid_max: default: 32768 minimum: 301 [ 0.002863] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002870] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003292] CPU: Testing write buffer coherency: ok [ 0.003586] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003658] Setting up static identity map for 0x80209000 - 0x80209098 [ 0.005964] Tegra Revision: A03 SKU: 128 CPU Process: 4 SoC Process: 0 [ 0.007195] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.007836] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.008468] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.008507] Brought up 4 CPUs [ 0.008519] SMP: Total of 4 processors activated (8.00 BogoMIPS). [ 0.008524] CPU: All CPU(s) started in SVC mode. [ 0.009099] devtmpfs: initialized [ 0.017358] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.018051] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns [ 0.021526] pinctrl core: initialized pinctrl subsystem [ 0.023028] NET: Registered protocol family 16 [ 0.025250] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.039935] cpuidle: using governor ladder [ 0.054926] cpuidle: using governor menu [ 0.063189] No ATAGs? [ 0.063222] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.063229] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.066014] Serial: AMBA PL011 UART driver [ 0.067105] tegra-mc 7000f000.memory-controller: no memory timings for RAM code 3 registered [ 0.087968] vdd_5v_sata: Failed to request enable GPIO30: -517 [ 0.088038] reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517 [ 0.088147] usb1_vbus: Failed to request enable GPIO238: -517 [ 0.088199] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ 0.088303] usb3_vbus: Failed to request enable GPIO236: -517 [ 0.088353] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.088504] sys_3v3_pexs: Failed to request enable GPIO95: -517 [ 0.088556] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.090604] vgaarb: loaded [ 0.091190] SCSI subsystem initialized [ 0.091308] libata version 3.00 loaded. [ 0.091488] usbcore: registered new interface driver usbfs [ 0.091526] usbcore: registered new interface driver hub [ 0.091564] usbcore: registered new device driver usb [ 0.146734] pps_core: LinuxPPS API ver. 1 registered [ 0.146744] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.146761] PTP clock support registered [ 0.146911] EDAC MC: Ver: 3.0.0 [ 0.148463] clocksource: Switched to clocksource timer_us [ 0.154532] NET: Registered protocol family 2 [ 0.154923] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.154977] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.155059] TCP: Hash tables configured (established 8192 bind 8192) [ 0.155148] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.155205] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.155391] NET: Registered protocol family 1 [ 0.155671] RPC: Registered named UNIX socket transport module. [ 0.155678] RPC: Registered udp transport module. [ 0.155682] RPC: Registered tcp transport module. [ 0.155686] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.155708] PCI: CLS 0 bytes, default 64 [ 0.156463] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.157436] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.163719] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.164220] NFS: Registering the id_resolver key type [ 0.164257] Key type id_resolver registered [ 0.164262] Key type id_legacy registered [ 0.164312] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.165156] bounce: pool size: 64 pages [ 0.165278] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.165289] io scheduler noop registered [ 0.165297] io scheduler deadline registered [ 0.165318] io scheduler cfq registered (default) [ 0.170555] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1" [ 0.170571] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1" [ 0.170593] tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1" [ 0.170603] tegra30-pinctrl 70000868.pinmux: invalid group "vi_hsync_pd7" for function "rsvd1" [ 0.171042] tegra30-pinctrl 70000868.pinmux: invalid group "hdmi_int_pn7" for function "rsvd1" [ 0.171086] tegra30-pinctrl 70000868.pinmux: invalid group "ulpi_data3_po4" for function "rsvd1" [ 0.171404] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d10_pt2" for function "rsvd1" [ 0.171417] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d11_pt3" for function "rsvd1" [ 0.171429] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d0_pt4" for function "rsvd1" [ 0.171469] tegra30-pinctrl 70000868.pinmux: invalid group "pu0" for function "rsvd1" [ 0.171500] tegra30-pinctrl 70000868.pinmux: invalid group "pu3" for function "rsvd1" [ 0.171529] tegra30-pinctrl 70000868.pinmux: invalid group "pu6" for function "rsvd1" [ 0.171576] tegra30-pinctrl 70000868.pinmux: invalid group "pv3" for function "rsvd1" [ 0.172046] tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1" [ 0.172155] tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1" [ 0.176401] tegra-pcie 3000.pcie-controller: 2x3 configuration [ 0.176517] vdd_1v5_gen: supplied by vdd_5v_in [ 0.176560] vdd_pexa,vdd_pexb: supplied by vdd_1v5_gen [ 0.176661] tegra-pcie 3000.pcie-controller: Failed to get supply 'hvdd-pex': -517 [ 0.180583] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 0.181425] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.214093] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.215746] SuperH (H)SCI(F) driver initialized [ 0.216282] msm_serial: driver initialized [ 0.216909] console [ttyS0] disabled [ 0.216948] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 1.144053] console [ttyS0] enabled [ 1.148028] STMicroelectronics ASC driver initialized [ 1.154618] [drm] Initialized drm 1.1.0 20060810 [ 1.160762] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.172270] loop: module loaded [ 1.180112] m25p80 spi32766.1: w25q32 (4096 Kbytes) [ 1.185007] spi32766.1: 'partitions' subnode not found on /spi@7000da00/spi-flash@1. Trying to parse direct subnodes as partitions. [ 1.198563] libphy: Fixed MDIO Bus: probed [ 1.203027] CAN device driver interface [ 1.207653] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.214608] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.221881] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.229319] usbcore: registered new interface driver pegasus [ 1.235008] usbcore: registered new interface driver asix [ 1.240429] usbcore: registered new interface driver ax88179_178a [ 1.246540] usbcore: registered new interface driver cdc_ether [ 1.252408] usbcore: registered new interface driver smsc75xx [ 1.258182] usbcore: registered new interface driver smsc95xx [ 1.263947] usbcore: registered new interface driver net1080 [ 1.269625] usbcore: registered new interface driver cdc_subset [ 1.275562] usbcore: registered new interface driver zaurus [ 1.281188] usbcore: registered new interface driver cdc_ncm [ 1.288170] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.294702] ehci-pci: EHCI PCI platform driver [ 1.299172] ehci-platform: EHCI generic platform driver [ 1.304518] ehci-omap: OMAP-EHCI Host Controller driver [ 1.309817] ehci-orion: EHCI orion driver [ 1.313902] SPEAr-ehci: EHCI SPEAr driver [ 1.317976] ehci-st: EHCI STMicroelectronics driver [ 1.322929] ehci-exynos: EHCI EXYNOS driver [ 1.327201] ehci-atmel: EHCI Atmel driver [ 1.331287] tegra-ehci: Tegra EHCI driver [ 1.335613] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.341802] ohci-pci: OHCI PCI platform driver [ 1.346275] ohci-platform: OHCI generic platform driver [ 1.351595] ohci-omap3: OHCI OMAP3 driver [ 1.355688] SPEAr-ohci: OHCI SPEAr driver [ 1.359775] ohci-st: OHCI STMicroelectronics driver [ 1.364726] ohci-atmel: OHCI Atmel driver [ 1.369031] usbcore: registered new interface driver usb-storage [ 1.375959] mousedev: PS/2 mouse device common for all mice [ 1.383723] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.390891] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.409606] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0 [ 1.417204] i2c /dev entries driver [ 1.425977] sdhci: Secure Digital Host Controller Interface driver [ 1.432155] sdhci: Copyright(c) Pierre Ossman [ 1.437396] Synopsys Designware Multimedia Card Interface Driver [ 1.444028] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.450191] sdhci-tegra 78000000.sdhci: Got CD GPIO [ 1.455081] sdhci-tegra 78000000.sdhci: Got WP GPIO [ 1.461092] sdhci-tegra 78000000.sdhci: No vmmc regulator found [ 1.467010] sdhci-tegra 78000000.sdhci: No vqmmc regulator found [ 1.473009] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.513543] mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA [ 1.522109] sdhci-tegra 78000600.sdhci: No vmmc regulator found [ 1.528028] sdhci-tegra 78000600.sdhci: No vqmmc regulator found [ 1.534026] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.573468] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 1.581886] ledtrig-cpu: registered to indicate activity on CPUs [ 1.588022] usbcore: registered new interface driver usbhid [ 1.593588] usbhid: USB HID core driver [ 1.600213] NET: Registered protocol family 10 [ 1.605224] sit: IPv6 over IPv4 tunneling driver [ 1.610287] NET: Registered protocol family 17 [ 1.614744] can: controller area network core (rev 20120528 abi 9) [ 1.620958] NET: Registered protocol family 29 [ 1.625401] can: raw protocol (rev 20120528) [ 1.629670] can: broadcast manager protocol (rev 20120528 t) [ 1.635328] can: netlink gateway (rev 20130117) max_hops=1 [ 1.641111] Key type dns_resolver registered [ 1.645799] ThumbEE CPU extension supported. [ 1.650081] Registering SWP/SWPB emulation handler [ 1.659799] mmc1: new high speed MMC card at address 0001 [ 1.666357] mmcblk0: mmc1:0001 SEM16G 14.8 GiB [ 1.671810] mmcblk0boot0: mmc1:0001 SEM16G partition 1 1.00 MiB [ 1.678744] mmcblk0boot1: mmc1:0001 SEM16G partition 2 1.00 MiB [ 1.685649] mmcblk0rpmb: mmc1:0001 SEM16G partition 3 128 KiB [ 1.694534] tegra-pcie 3000.pcie-controller: 2x3 configuration [ 1.697878] Primary GPT is invalid, using alternate GPT. [ 1.697893] mmcblk0: p1 p2 p3 p4 p5 [ 1.709420] sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in [ 1.714581] sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw [ 1.722494] tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes [ 1.787635] tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes [ 2.198358] tegra-pcie 3000.pcie-controller: link 2 down, retrying [ 2.608392] tegra-pcie 3000.pcie-controller: link 2 down, retrying [ 3.018406] tegra-pcie 3000.pcie-controller: link 2 down, retrying [ 3.026596] tegra-pcie 3000.pcie-controller: link 2 down, ignoring [ 3.032900] tegra-pcie 3000.pcie-controller: PCI host bridge to bus 0000:00 [ 3.039862] pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff] [ 3.046727] pci_bus 0000:00: root bus resource [mem 0x28000000-0x3fffffff pref] [ 3.054026] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.059503] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 3.065694] pci 0000:00:01.0: [10de:0e1c] type 01 class 0x060400 [ 3.071754] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.078525] PCI: bus0: Fast back to back transfers disabled [ 3.084095] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.092187] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 3.098217] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.103797] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 3.111016] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.118281] pci 0000:01:00.0: supports D1 D2 [ 3.122547] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.138485] PCI: bus1: Fast back to back transfers disabled [ 3.144056] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.150715] pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref] [ 3.158456] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.164545] pci 0000:01:00.0: BAR 4: assigned [mem 0x28000000-0x28003fff 64bit pref] [ 3.172287] pci 0000:01:00.0: BAR 2: assigned [mem 0x28004000-0x28004fff 64bit pref] [ 3.180027] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.186116] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.191075] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.197161] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.204905] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.211950] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 3.218193] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.225152] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.231672] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.238540] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.244122] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.251234] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08d6000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375 [ 3.261233] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.270531] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.276037] vdd_1v8_gen: supplied by vdd_5v_in [ 3.283466] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.290074] [drm] No driver support for vblank timestamp query. [ 3.296017] drm drm: No connectors reported connected with modes [ 3.302022] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.329537] Console: switching to colour frame buffer device 128x48 [ 3.341839] drm drm: fb0: frame buffer device [ 3.363857] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.372397] usb3_vbus: supplied by vdd_5v_in [ 3.378796] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.385254] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.390662] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.398502] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.413869] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.421131] hub 1-0:1.0: USB hub found [ 3.424903] hub 1-0:1.0: 1 port detected [ 3.429775] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.435191] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.442931] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.458859] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.465989] hub 2-0:1.0: USB hub found [ 3.469755] hub 2-0:1.0: 1 port detected [ 3.478578] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.492573] vdd_sata,avdd_plle: disabling [ 3.497388] usb1_vbus: disabling [ 3.503355] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 3.523174] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 3.534984] EXT4-fs (mmcblk0p1): recovery complete [ 3.539787] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.547895] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 3.557897] devtmpfs: mounted [ 3.561849] Freeing unused kernel memory: 1044K (c0dbb000 - c0ec0000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 3.778882] usb 2-1: new high-speed USB device number 2 using tegra-ehci