Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2015-07-05 12:37:53.809167732 -0700
+++ /tmp/foob	2015-07-05 12:37:53.809167732 -0700
@@ -1,6 +1,6 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
-Linux version 4.1.0+ (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Tue Jun 23 18:04:00 PDT 2015
+Linux version 4.2.0-rc1+ (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Sun Jul 5 12:35:15 PDT 2015
 CPU: AArch64 Processor [411fd070] revision 0
 Detected PIPT I-cache on CPU0
 alternatives: enabling workaround for ARM erratum 832075
@@ -11,33 +11,35 @@
 psci: probing for conduit method from DT.
 psci: PSCIv0.2 detected in firmware.
 psci: Using standard PSCI v0.2 function IDs
-PERCPU: Embedded 16 pages/cpu @ffffffc03efdf000 s27968 r8192 d29376 u65536
+psci: Trusted OS migration not required
+PERCPU: Embedded 15 pages/cpu @ffffffc03efe0000 s23744 r8192 d29504 u61440
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258048
 Kernel command line: root=/dev/vda2 rw rootwait mem=1024M console=ttyAMA0,38400n8 init=/bin/bash
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
 Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
 software IO TLB [mem 0x79c00000-0x7dc00000] (64MB) mapped at [ffffffc039c00000-ffffffc03dbfffff]
-Memory: 939416K/1048576K available (5385K kernel code, 437K rwdata, 2168K rodata, 420K init, 204K bss, 92776K reserved, 16384K cma-reserved)
+Memory: 939204K/1048576K available (5509K kernel code, 442K rwdata, 2224K rodata, 452K init, 204K bss, 92988K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000   (   246 GB)
     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
               0xffffffbdc1000000 - 0xffffffbdc2000000   (    16 MB actual)
-    fixed   : 0xffffffbffabfd000 - 0xffffffbffac00000   (    12 KB)
+    fixed   : 0xffffffbffa7fd000 - 0xffffffbffac00000   (  4108 KB)
     PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000   (    16 MB)
     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
     memory  : 0xffffffc000000000 - 0xffffffc040000000   (  1024 MB)
-      .init : 0xffffffc0007e3000 - 0xffffffc00084c000   (   420 KB)
-      .text : 0xffffffc000080000 - 0xffffffc0007e2564   (  7562 KB)
-      .data : 0xffffffc000852000 - 0xffffffc0008bf400   (   437 KB)
+      .init : 0xffffffc000810000 - 0xffffffc000881000   (   452 KB)
+      .text : 0xffffffc000080000 - 0xffffffc00080f5f4   (  7742 KB)
+      .data : 0xffffffc000887000 - 0xffffffc0008f5800   (   442 KB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 Preemptible hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
+	Build-time adjustment of leaf fanout to 64.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
-RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
+RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
 NR_IRQS:64 nr_irqs:64 0
 Architected cp15 timer(s) running at 62.50MHz (virt).
-clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
 sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns
 Console: colour dummy device 80x25
 Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
@@ -55,12 +57,12 @@
 alternatives: patching kernel code
 devtmpfs: initialized
 DMI not present or invalid.
-clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 cpuidle: using governor ladder
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ ffffffc000859000, 1 data @ ffffffc000858000)
+vdso: 2 pages (1 code @ ffffffc00088d000, 1 data @ ffffffc00088c000)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -71,7 +73,8 @@
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
-Switched to clocksource arch_sys_counter
+dmi: Firmware registration failed.
+clocksource: Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
 TCP established hash table entries: 8192 (order: 4, 65536 bytes)
 TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
@@ -99,11 +102,14 @@
 io scheduler cfq registered (default)
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
 msm_serial: driver initialized
-Unable to detect cache hierarcy from DT for CPU 0
+Unable to detect cache hierarchy from DT for CPU 0
 loop: module loaded
  vda: vda1 vda2
 tun: Universal TUN/TAP device driver, 1.6
 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
+thunder-BGX, ver 1.0
+thunder-nic, ver 1.0
+thunder-nicvf, ver 1.0
 sky2: driver version 1.30
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-pci: EHCI PCI platform driver
@@ -116,6 +122,7 @@
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
+ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
 NET: Registered protocol family 17
@@ -129,8 +136,8 @@
 EXT4-fs (vda2): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 254:2.
 devtmpfs: mounted
-Freeing unused kernel memory: 420K (ffffffc0007e3000 - ffffffc00084c000)
-Freeing alternatives memory: 12K (ffffffc00084c000 - ffffffc00084f000)
+Freeing unused kernel memory: 452K (ffffffc000810000 - ffffffc000881000)
+Freeing alternatives memory: 12K (ffffffc000881000 - ffffffc000884000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 bash-4.3# 
\ No newline at end of file
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2015-07-05 12:37:53.825167737 -0700
+++ /tmp/foob	2015-07-05 12:37:53.829167738 -0700
@@ -37,10 +37,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ######################################
-	 3.3 MiB/s
+	 ##############################
+	 3.2 MiB/s
 done
-Bytes transferred = 6273992 (5fbbc8 hex)
+Bytes transferred = 6152088 (5ddf98 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
@@ -51,7 +51,7 @@
 done
 Bytes transferred = 34894 (884e hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5fbbc8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ddf98 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff84d ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.1.0-13741-gb953c0d (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jun 23 18:03:05 PDT 2015
+Linux version 4.2.0-rc1-26550-gd770e55 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jul 5 12:33:57 PDT 2015
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
@@ -67,20 +67,20 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0f40780, node_mem_map ee7f8000
+free_area_init_node: node 0, pgdat c0efda80, node_mem_map ee7f8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
   HighMem zone: 329472 pages, LIFO batch:31
-PERCPU: Embedded 12 pages/cpu @ee7a3000 s16960 r8192 d24000 u49152
-pcpu-alloc: s16960 r8192 d24000 u49152 alloc=12*4096
+PERCPU: Embedded 11 pages/cpu @ee7a7000 s14784 r8192 d22080 u45056
+pcpu-alloc: s14784 r8192 d22080 u45056 alloc=11*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999136K/2096128K available (8012K kernel code, 1025K rwdata, 3616K rodata, 884K init, 318K bss, 31456K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 1999412K/2096128K available (7782K kernel code, 1038K rwdata, 3508K rodata, 944K init, 327K bss, 31180K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -88,23 +88,24 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0d64184   (11633 kB)
-      .init : 0xc0d65000 - 0xc0e42000   ( 884 kB)
-      .data : 0xc0e42000 - 0xc0f42760   (1026 kB)
-       .bss : 0xc0f45000 - 0xc0f94a68   ( 319 kB)
+      .text : 0xc0208000 - 0xc0d0f9d4   (11295 kB)
+      .init : 0xc0d10000 - 0xc0dfc000   ( 944 kB)
+      .data : 0xc0dfc000 - 0xc0effa80   (1039 kB)
+       .bss : 0xc0f02000 - 0xc0f53c28   ( 328 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
+	Build-time adjustment of leaf fanout to 32.
 	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
-RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
 L2C: failed to init: -19
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
-clocksource timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
 Architected cp15 timer(s) running at 12.00MHz (virt).
-clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
 sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
 Switching to timer-based delay loop, resolution 83ns
 Console: colour dummy device 80x30
@@ -128,7 +129,7 @@
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
-clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
@@ -138,6 +139,7 @@
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 8 bytes.
 Serial: AMBA PL011 UART driver
+tegra-mc 70019000.memory-controller: no memory timings for RAM code 3 registered
 dvdd_ts: Failed to request enable GPIO61: -517
 reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517
 usb1_vbus: Failed to request enable GPIO108: -517
@@ -156,14 +158,11 @@
 palmas 2-0058: Irq flag is 0x00000000
 palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
 sdhci-vdd-sd-slot: ramp_delay not set
-media: Linux media interface: v0.10
-Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
-Advanced Linux Sound Architecture Driver Initialized.
-Switched to clocksource arch_sys_counter
+clocksource: Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
@@ -183,7 +182,7 @@
 Key type id_legacy registered
 ntfs: driver 2.1.32 [Flags: R/O].
 bounce: pool size: 64 pages
-Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
 io scheduler noop registered
 io scheduler deadline registered
 io scheduler cfq registered (default)
@@ -208,7 +207,7 @@
 loop: module loaded
 m25p80 spi32766.0: w25q32dw (4096 Kbytes)
 CAN device driver interface
-igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k
 igb: Copyright (c) 2007-2014 Intel Corporation.
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -229,6 +228,7 @@
 SPEAr-ehci: EHCI SPEAr driver
 ehci-st: EHCI STMicroelectronics driver
 ehci-exynos: EHCI EXYNOS driver
+ehci-atmel: EHCI Atmel driver
 tegra-ehci: Tegra EHCI driver
 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 ohci-pci: OHCI PCI platform driver
@@ -236,15 +236,13 @@
 ohci-omap3: OHCI OMAP3 driver
 SPEAr-ohci: OHCI SPEAr driver
 ohci-st: OHCI STMicroelectronics driver
+ohci-atmel: OHCI Atmel driver
 usbcore: registered new interface driver usb-storage
 mousedev: PS/2 mouse device common for all mice
 palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps659 as rtc0
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 i2c /dev entries driver
-usbcore: registered new interface driver uvcvideo
-USB Video Class driver (1.1.1)
-gspca_main: v2.14.0 registered
 sbs-battery 0-000b: sbs_probe: Failed to get device status
 sbs-battery: probe of 0-000b failed with error -121
 vdd-sensor-2v85: supplied by vdd-sys-3v3
@@ -265,17 +263,6 @@
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-usbcore: registered new interface driver snd-usb-audio
-mmc1: MAN_BKOPS_EN bit is not set
-mmc1: new high speed MMC card at address 0001
-mmcblk0: mmc1:0001 SEM32G 29.1 GiB 
-mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
-mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
-mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
-tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
-tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
-input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound/sound/card0/input0
 NET: Registered protocol family 17
 can: controller area network core (rev 20120528 abi 9)
 NET: Registered protocol family 29
@@ -290,6 +277,13 @@
 vdd_hdmi_5v0: supplied by vdd-sys-5v0
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
+mmc1: MAN_BKOPS_EN bit is not set
+mmc1: new high speed MMC card at address 0001
+mmcblk0: mmc1:0001 SEM32G 29.1 GiB 
+mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
+mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
+mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
 Console: switching to colour frame buffer device 240x75
 drm drm: fb0:  frame buffer device
 drm drm: registered panic notifier
@@ -301,19 +295,17 @@
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
-input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-04 09:54:15 UTC (946979655)
+input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-16 04:25:40 UTC (947996740)
 vdd_cam_1v8_reg: disabling
 usb1_vbus: disabling
 dvdd_ts: disabling
-ALSA device list:
-  #0: NVIDIA Tegra Dalmore
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 884K (c0d65000 - c0e42000)
+Freeing unused kernel memory: 944K (c0d10000 - c0dfc000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.613726] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.193848] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2015-07-05 12:37:53.837167740 -0700
+++ /tmp/foob	2015-07-05 12:37:53.837167740 -0700
@@ -36,21 +36,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ########
-	 3 MiB/s
+	 #####################
+	 3.3 MiB/s
 done
-Bytes transferred = 4885312 (4a8b40 hex)
+Bytes transferred = 5066080 (4d4d60 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.6 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 34894 (884e hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x4a8b40 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x4d4d60 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff84d ... OK
@@ -61,7 +61,7 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 4.1.0-13741-gb953c0d (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jun 23 18:03:20 PDT 2015
+Linux version 4.2.0-rc1-26550-gd770e55 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jul 5 12:34:32 PDT 2015
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
@@ -69,20 +69,20 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0962480, node_mem_map ee7f7000
+free_area_init_node: node 0, pgdat c09c4cc0, node_mem_map ee7f7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
   HighMem zone: 329472 pages, LIFO batch:31
-PERCPU: Embedded 12 pages/cpu @ee7a2000 s17216 r8192 d23744 u49152
-pcpu-alloc: s17216 r8192 d23744 u49152 alloc=12*4096
+PERCPU: Embedded 11 pages/cpu @ee7a6000 s15104 r8192 d21760 u45056
+pcpu-alloc: s15104 r8192 d21760 u45056 alloc=11*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2003056K/2096128K available (6700K kernel code, 312K rwdata, 2260K rodata, 308K init, 351K bss, 27536K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 2002668K/2096128K available (6941K kernel code, 346K rwdata, 2376K rodata, 312K init, 363K bss, 27924K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -90,20 +90,21 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc08c8518   (8962 kB)
-      .init : 0xc08c9000 - 0xc0916000   ( 308 kB)
-      .data : 0xc0916000 - 0xc0964020   ( 313 kB)
-       .bss : 0xc0967000 - 0xc09bee14   ( 352 kB)
+      .text : 0xc0008000 - 0xc0921858   (9319 kB)
+      .init : 0xc0922000 - 0xc0970000   ( 312 kB)
+      .data : 0xc0970000 - 0xc09c6880   ( 347 kB)
+       .bss : 0xc09c9000 - 0xc0a23c54   ( 364 kB)
 Preemptible hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
+	Build-time adjustment of leaf fanout to 32.
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
 L2C: failed to init: -19
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
-clocksource timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
 Architected cp15 timer(s) running at 12.00MHz (virt).
-clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
 sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
 Switching to timer-based delay loop, resolution 83ns
 Console: colour dummy device 80x30
@@ -129,7 +130,7 @@
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
-clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
@@ -138,6 +139,7 @@
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 8 bytes.
+tegra-mc 70019000.memory-controller: no memory timings for RAM code 3 registered
 dvdd_ts: Failed to request enable GPIO61: -517
 reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517
 usb1_vbus: Failed to request enable GPIO108: -517
@@ -168,7 +170,7 @@
 Bluetooth: L2CAP socket layer initialized
 Bluetooth: SCO socket layer initialized
 cfg80211: Calling CRDA to update world regulatory domain
-Switched to clocksource arch_sys_counter
+clocksource: Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
@@ -203,7 +205,7 @@
 loop: module loaded
 m25p80 spi32766.0: w25q32dw (4096 Kbytes)
 CAN device driver interface
-igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k
 igb: Copyright (c) 2007-2014 Intel Corporation.
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -293,7 +295,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-04 09:54:47 UTC (946979687)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-16 04:26:18 UTC (947996778)
 vdd_cam_1v8_reg: disabling
 usb1_vbus: disabling
 dvdd_ts: disabling
@@ -305,7 +307,7 @@
 EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 308K (c08c9000 - c0916000)
+Freeing unused kernel memory: 312K (c0922000 - c0970000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.779729] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.739994] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2015-07-05 12:37:53.849167744 -0700
+++ /tmp/foob	2015-07-05 12:37:53.853167745 -0700
@@ -29,7 +29,6 @@
 Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd'
 Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
 Tegra124 (Jetson TK1) # tftpboot 0x81000000 zImage.multi_v7_defconfig
-Waiting for Ethernet connection... done.
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'zImage.multi_v7_defconfig'.
@@ -40,29 +39,29 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ######################################
-	 3.1 MiB/s
+	 ##############################
+	 3.2 MiB/s
 done
-Bytes transferred = 6273992 (5fbbc8 hex)
+Bytes transferred = 6152088 (5ddf98 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x82000000 tegra124-jetson-tk1.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x82000000
 Loading: *#####
-	 3 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 63003 (f61b hex)
+Bytes transferred = 62999 (f617 hex)
 Tegra124 (Jetson TK1) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5fbbc8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ddf98 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Using Device Tree in place at 82000000, end 8201261a
+   Using Device Tree in place at 82000000, end 82012616
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.1.0-13741-gb953c0d (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jun 23 18:03:05 PDT 2015
+Linux version 4.2.0-rc1-26550-gd770e55 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jul 5 12:33:57 PDT 2015
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra124 Jetson TK1
@@ -70,20 +69,20 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0f40780, node_mem_map ee7f8000
+free_area_init_node: node 0, pgdat c0efda80, node_mem_map ee7f8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
   HighMem zone: 329472 pages, LIFO batch:31
-PERCPU: Embedded 12 pages/cpu @ee790000 s16960 r8192 d24000 u49152
-pcpu-alloc: s16960 r8192 d24000 u49152 alloc=12*4096
+PERCPU: Embedded 11 pages/cpu @ee794000 s14784 r8192 d22080 u45056
+pcpu-alloc: s14784 r8192 d22080 u45056 alloc=11*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999032K/2096128K available (8012K kernel code, 1025K rwdata, 3616K rodata, 884K init, 318K bss, 31560K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 1999308K/2096128K available (7782K kernel code, 1038K rwdata, 3508K rodata, 944K init, 327K bss, 31284K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -91,23 +90,24 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0d64184   (11633 kB)
-      .init : 0xc0d65000 - 0xc0e42000   ( 884 kB)
-      .data : 0xc0e42000 - 0xc0f42760   (1026 kB)
-       .bss : 0xc0f45000 - 0xc0f94a68   ( 319 kB)
+      .text : 0xc0208000 - 0xc0d0f9d4   (11295 kB)
+      .init : 0xc0d10000 - 0xc0dfc000   ( 944 kB)
+      .data : 0xc0dfc000 - 0xc0effa80   (1039 kB)
+       .bss : 0xc0f02000 - 0xc0f53c28   ( 328 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
+	Build-time adjustment of leaf fanout to 32.
 	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
-RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000
 L2C: failed to init: -19
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
-clocksource timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
 Architected cp15 timer(s) running at 12.00MHz (virt).
-clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
 sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
 Switching to timer-based delay loop, resolution 83ns
 Console: colour dummy device 80x30
@@ -131,7 +131,7 @@
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
-clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
@@ -159,14 +159,11 @@
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
-media: Linux media interface: v0.10
-Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
-Advanced Linux Sound Architecture Driver Initialized.
-Switched to clocksource arch_sys_counter
+clocksource: Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
@@ -186,7 +183,7 @@
 Key type id_legacy registered
 ntfs: driver 2.1.32 [Flags: R/O].
 bounce: pool size: 64 pages
-Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
 io scheduler noop registered
 io scheduler deadline registered
 io scheduler cfq registered (default)
@@ -212,7 +209,7 @@
 tegra-ahci 70027000.sata: Failed to get regulators
 m25p80 spi32765.0: w25q32dw (4096 Kbytes)
 CAN device driver interface
-igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k
 igb: Copyright (c) 2007-2014 Intel Corporation.
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -234,10 +231,11 @@
 SPEAr-ehci: EHCI SPEAr driver
 ehci-st: EHCI STMicroelectronics driver
 ehci-exynos: EHCI EXYNOS driver
+ehci-atmel: EHCI Atmel driver
 tegra-ehci: Tegra EHCI driver
 tegra-ehci 7d004000.usb: EHCI Host Controller
 tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d004000.usb: irq 346, io mem 0x7d004000
+tegra-ehci 7d004000.usb: irq 347, io mem 0x7d004000
 tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
@@ -247,16 +245,14 @@
 ohci-omap3: OHCI OMAP3 driver
 SPEAr-ohci: OHCI SPEAr driver
 ohci-st: OHCI STMicroelectronics driver
+ohci-atmel: OHCI Atmel driver
 usbcore: registered new interface driver usb-storage
 mousedev: PS/2 mouse device common for all mice
 as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
-as3722-rtc as3722-rtc: RTC interrupt 365
+as3722-rtc as3722-rtc: RTC interrupt 366
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 i2c /dev entries driver
-usbcore: registered new interface driver uvcvideo
-USB Video Class driver (1.1.1)
-gspca_main: v2.14.0 registered
 0-004c supply vcc not found, using dummy regulator
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
@@ -275,18 +271,6 @@
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-usbcore: registered new interface driver snd-usb-audio
-mmc0: MAN_BKOPS_EN bit is not set
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 SEM16G 14.6 GiB 
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
-Primary GPT is invalid, using alternate GPT.
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
-tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
-tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok
-input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card0/input0
 NET: Registered protocol family 17
 can: controller area network core (rev 20120528 abi 9)
 NET: Registered protocol family 29
@@ -302,6 +286,14 @@
 +1.35V_LP0(sd2): supplied by +5V_SYS
 +1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
 tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
+mmc0: MAN_BKOPS_EN bit is not set
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 SEM16G 14.6 GiB 
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
+Primary GPT is invalid, using alternate GPT.
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
 tegra-pcie 1003000.pcie-controller: link 0 down, retrying
 tegra-pcie 1003000.pcie-controller: link 0 down, retrying
@@ -341,7 +333,7 @@
 +5V_USB_HS: supplied by +5V_SYS
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci 7d008000.usb: irq 347, io mem 0x7d008000
+tegra-ehci 7d008000.usb: irq 348, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
@@ -352,8 +344,8 @@
 sdhci-tegra 700b0400.sdhci: No vmmc regulator found
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
-input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:19 UTC (949363219)
+input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_VPP_FUSE: disabling
 +2.8V_RUN_CAM_AF: disabling
@@ -362,8 +354,6 @@
 +1.2V_RUN_CAM_FRONT: disabling
 +2.8V_RUN_CAM: disabling
 +1.8V_RUN_CAM: disabling
-ALSA device list:
-  #0: NVIDIA Tegra Jetson TK1
 ata1: SATA link down (SStatus 0 SControl 300)
 EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
 EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
@@ -372,7 +362,7 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 884K (c0d65000 - c0e42000)
+Freeing unused kernel memory: 944K (c0d10000 - c0dfc000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2015-07-05 12:37:53.873167751 -0700
+++ /tmp/foob	2015-07-05 12:37:53.877167752 -0700
@@ -38,24 +38,24 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ########
-	 3 MiB/s
+	 #####################
+	 3.2 MiB/s
 done
-Bytes transferred = 4885312 (4a8b40 hex)
+Bytes transferred = 5066080 (4d4d60 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x82000000 tegra124-jetson-tk1.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x82000000
 Loading: *#####
-	 2.7 MiB/s
+	 3 MiB/s
 done
-Bytes transferred = 63003 (f61b hex)
+Bytes transferred = 62999 (f617 hex)
 Tegra124 (Jetson TK1) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x4a8b40 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x4d4d60 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Using Device Tree in place at 82000000, end 8201261a
+   Using Device Tree in place at 82000000, end 82012616
 
 Starting kernel ...
 
@@ -63,7 +63,7 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 4.1.0-13741-gb953c0d (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jun 23 18:03:20 PDT 2015
+Linux version 4.2.0-rc1-26550-gd770e55 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jul 5 12:34:32 PDT 2015
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra124 Jetson TK1
@@ -71,20 +71,20 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0962480, node_mem_map ee7f7000
+free_area_init_node: node 0, pgdat c09c4cc0, node_mem_map ee7f7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
   HighMem zone: 329472 pages, LIFO batch:31
-PERCPU: Embedded 12 pages/cpu @ee78f000 s17216 r8192 d23744 u49152
-pcpu-alloc: s17216 r8192 d23744 u49152 alloc=12*4096
+PERCPU: Embedded 11 pages/cpu @ee793000 s15104 r8192 d21760 u45056
+pcpu-alloc: s15104 r8192 d21760 u45056 alloc=11*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2002952K/2096128K available (6700K kernel code, 312K rwdata, 2260K rodata, 308K init, 351K bss, 27640K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 2002564K/2096128K available (6941K kernel code, 346K rwdata, 2376K rodata, 312K init, 363K bss, 28028K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -92,20 +92,21 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc08c8518   (8962 kB)
-      .init : 0xc08c9000 - 0xc0916000   ( 308 kB)
-      .data : 0xc0916000 - 0xc0964020   ( 313 kB)
-       .bss : 0xc0967000 - 0xc09bee14   ( 352 kB)
+      .text : 0xc0008000 - 0xc0921858   (9319 kB)
+      .init : 0xc0922000 - 0xc0970000   ( 312 kB)
+      .data : 0xc0970000 - 0xc09c6880   ( 347 kB)
+       .bss : 0xc09c9000 - 0xc0a23c54   ( 364 kB)
 Preemptible hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
+	Build-time adjustment of leaf fanout to 32.
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000
 L2C: failed to init: -19
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
-clocksource timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
 Architected cp15 timer(s) running at 12.00MHz (virt).
-clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
+clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
 sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
 Switching to timer-based delay loop, resolution 83ns
 Console: colour dummy device 80x30
@@ -131,7 +132,7 @@
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
-clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
@@ -170,7 +171,7 @@
 Bluetooth: L2CAP socket layer initialized
 Bluetooth: SCO socket layer initialized
 cfg80211: Calling CRDA to update world regulatory domain
-Switched to clocksource arch_sys_counter
+clocksource: Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
@@ -206,7 +207,7 @@
 tegra-ahci 70027000.sata: Failed to get regulators
 m25p80 spi32765.0: w25q32dw (4096 Kbytes)
 CAN device driver interface
-igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k
 igb: Copyright (c) 2007-2014 Intel Corporation.
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -225,7 +226,7 @@
 tegra-ehci: Tegra EHCI driver
 tegra-ehci 7d004000.usb: EHCI Host Controller
 tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d004000.usb: irq 346, io mem 0x7d004000
+tegra-ehci 7d004000.usb: irq 347, io mem 0x7d004000
 tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
@@ -235,7 +236,7 @@
 usbcore: registered new interface driver usb-storage
 mousedev: PS/2 mouse device common for all mice
 as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
-as3722-rtc as3722-rtc: RTC interrupt 365
+as3722-rtc as3722-rtc: RTC interrupt 366
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 i2c /dev entries driver
@@ -266,9 +267,10 @@
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
 Primary GPT is invalid, using alternate GPT.
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input0
 tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
 tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok
-input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card0/input0
+input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card1/input1
 NET: Registered protocol family 10
 mip6: Mobile IPv6
 sit: IPv6 over IPv4 tunneling driver
@@ -294,50 +296,22 @@
 tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
 tegra-pcie 1003000.pcie-controller: link 0 down, retrying
-tegra-pcie 1003000.pcie-controller: link 0 down, retrying
 cfg80211: Calling CRDA to update world regulatory domain
 tegra-pcie 1003000.pcie-controller: link 0 down, retrying
+tegra-pcie 1003000.pcie-controller: link 0 down, retrying
 tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
 tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
+tegra-pcie 1003000.pcie-controller: link 1 down, retrying
+tegra-pcie 1003000.pcie-controller: link 1 down, retrying
+tegra-pcie 1003000.pcie-controller: link 1 down, retrying
+tegra-pcie 1003000.pcie-controller: link 1 down, ignoring
 tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
 pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
 pci_bus 0000:00: root bus resource [bus 00-ff]
 pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
-pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
-pci 0000:00:02.0: IOMMU is currently not supported for PCI
-pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
-PCI: bus0: Fast back to back transfers disabled
-pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
-pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
-pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
-pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
-pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
-pci 0000:01:00.0: IOMMU is currently not supported for PCI
-pci 0000:01:00.0: supports D1 D2
-pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
-PCI: bus1: Fast back to back transfers disabled
-pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
-pci 0000:00:02.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
-pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
-pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
-pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
-pci 0000:01:00.0: BAR 2: assigned [mem 0x13000000-0x13000fff 64bit]
-pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
-pci 0000:00:02.0: PCI bridge to [bus 01]
-pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
-pci 0000:00:02.0:   bridge window [mem 0x13000000-0x130fffff]
-pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
-pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
-pcieport 0000:00:02.0: enabling device (0140 -> 0143)
-pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
-pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
-pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
-r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
-r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xf00e0000, 00:04:4b:25:b3:b4, XID 0c000800 IRQ 382
-r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
+PCI: bus0: Fast back to back transfers enabled
 +5V_HDMI_CON: supplied by +5V_SYS
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 +3.3V_RUN: supplied by +3.3V_SYS
@@ -360,7 +334,7 @@
 +5V_USB_HS: supplied by +5V_SYS
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci 7d008000.usb: irq 347, io mem 0x7d008000
+tegra-ehci 7d008000.usb: irq 348, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
@@ -371,8 +345,8 @@
 sdhci-tegra 700b0400.sdhci: No vmmc regulator found
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
-input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:51 UTC (949363251)
+input: gpio-keys as /devices/soc0/gpio-keys/input/input2
+as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:19 UTC (949363219)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_VPP_FUSE: disabling
 +2.8V_RUN_CAM_AF: disabling
@@ -382,7 +356,8 @@
 +2.8V_RUN_CAM: disabling
 +1.8V_RUN_CAM: disabling
 ALSA device list:
-  #0: NVIDIA Tegra Jetson TK1
+  #0: tegra-hda at 0x70038000 irq 342
+  #1: NVIDIA Tegra Jetson TK1
 ata1: SATA link down (SStatus 0 SControl 300)
 EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
 EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (244)
@@ -391,7 +366,8 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 308K (c08c9000 - c0916000)
+Freeing unused kernel memory: 312K (c0922000 - c0970000)
+cfg80211: Calling CRDA to update world regulatory domain
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2015-07-05 12:37:53.897167758 -0700
+++ /tmp/foob	2015-07-05 12:37:53.901167759 -0700
@@ -45,21 +45,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ######################################
+	 ##############################
 	 4.1 MiB/s
 done
-Bytes transferred = 6273992 (5fbbc8 hex)
+Bytes transferred = 6152088 (5ddf98 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 3.4 MiB/s
+	 4 MiB/s
 done
 Bytes transferred = 21130 (528a hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5fbbc8 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5ddf98 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 02410289
@@ -67,7 +67,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.1.0-13741-gb953c0d (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jun 23 18:03:05 PDT 2015
+Linux version 4.2.0-rc1-26550-gd770e55 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jul 5 12:33:57 PDT 2015
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: Compulab TrimSlice board
@@ -75,20 +75,20 @@
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0f40780, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c0efda80, node_mem_map eeff8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
   HighMem zone: 67584 pages, LIFO batch:15
-PERCPU: Embedded 12 pages/cpu @eefca000 s16960 r8192 d24000 u49152
-pcpu-alloc: s16960 r8192 d24000 u49152 alloc=12*4096
+PERCPU: Embedded 11 pages/cpu @eefcc000 s14784 r8192 d22080 u45056
+pcpu-alloc: s14784 r8192 d22080 u45056 alloc=11*4096
 pcpu-alloc: [0] 0 [0] 1 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260624
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 959944K/1048576K available (8012K kernel code, 1025K rwdata, 3616K rodata, 884K init, 318K bss, 23096K reserved, 65536K cma-reserved, 204800K highmem)
+Memory: 960212K/1048576K available (7782K kernel code, 1038K rwdata, 3508K rodata, 944K init, 327K bss, 22828K reserved, 65536K cma-reserved, 204800K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -96,15 +96,16 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0d64184   (11633 kB)
-      .init : 0xc0d65000 - 0xc0e42000   ( 884 kB)
-      .data : 0xc0e42000 - 0xc0f42760   (1026 kB)
-       .bss : 0xc0f45000 - 0xc0f94a68   ( 319 kB)
+      .text : 0xc0208000 - 0xc0d0f9d4   (11295 kB)
+      .init : 0xc0d10000 - 0xc0dfc000   ( 944 kB)
+      .data : 0xc0dfc000 - 0xc0effa80   (1039 kB)
+       .bss : 0xc0f02000 - 0xc0f53c28   ( 328 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
+	Build-time adjustment of leaf fanout to 32.
 	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2.
-RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
+RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 128 interrupts forwarded to /interrupt-controller@50041000
 L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
@@ -116,7 +117,7 @@
 L2C-310 cache controller enabled, 8 ways, 1024 kB
 L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e480001
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
-clocksource timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
 Console: colour dummy device 80x30
 Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=5000)
@@ -133,7 +134,7 @@
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
-clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
@@ -151,14 +152,11 @@
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
-media: Linux media interface: v0.10
-Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
-Advanced Linux Sound Architecture Driver Initialized.
-Switched to clocksource timer_us
+clocksource: Switched to clocksource timer_us
 NET: Registered protocol family 2
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
@@ -171,7 +169,7 @@
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 64
-CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
+hw perfevents: Failed to parse /pmu/interrupt-affinity[0]
 hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
 futex hash table entries: 512 (order: 3, 32768 bytes)
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
@@ -180,7 +178,7 @@
 Key type id_legacy registered
 ntfs: driver 2.1.32 [Flags: R/O].
 bounce: pool size: 64 pages
-Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
 io scheduler noop registered
 io scheduler deadline registered
 io scheduler cfq registered (default)
@@ -246,7 +244,7 @@
 m25p80 spi32766.0: found s25fl008k, expected w25q80bl
 m25p80 spi32766.0: s25fl008k (1024 Kbytes)
 CAN device driver interface
-igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
@@ -273,6 +271,7 @@
 SPEAr-ehci: EHCI SPEAr driver
 ehci-st: EHCI STMicroelectronics driver
 ehci-exynos: EHCI EXYNOS driver
+ehci-atmel: EHCI Atmel driver
 tegra-ehci: Tegra EHCI driver
 ulpi_phy_power_on: ulpi write failed
 tegra-ehci c5004000.usb: Failed to power on the phy
@@ -289,15 +288,13 @@
 ohci-omap3: OHCI OMAP3 driver
 SPEAr-ohci: OHCI SPEAr driver
 ohci-st: OHCI STMicroelectronics driver
+ohci-atmel: OHCI Atmel driver
 usbcore: registered new interface driver usb-storage
 mousedev: PS/2 mouse device common for all mice
 rtc-em3027 2-0056: rtc core: registered rtc-em3027 as rtc0
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 i2c /dev entries driver
-usbcore: registered new interface driver uvcvideo
-USB Video Class driver (1.1.1)
-gspca_main: v2.14.0 registered
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 Synopsys Designware Multimedia Card Interface Driver
@@ -315,26 +312,10 @@
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-usbcore: registered new interface driver snd-usb-audio
-tlv320aic23-codec 2-001a: Control not supported for path LLINEIN -> [NULL] -> Line Input
-tlv320aic23-codec 2-001a: ASoC: no dapm match for LLINEIN --> NULL --> Line Input
-tlv320aic23-codec 2-001a: ASoC: Failed to add route LLINEIN -> NULL -> Line Input
-tlv320aic23-codec 2-001a: Control not supported for path RLINEIN -> [NULL] -> Line Input
-tlv320aic23-codec 2-001a: ASoC: no dapm match for RLINEIN --> NULL --> Line Input
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
-tlv320aic23-codec 2-001a: ASoC: Failed to add route RLINEIN -> NULL -> Line Input
-tlv320aic23-codec 2-001a: Control not supported for path MICIN -> [NULL] -> Mic Input
-tlv320aic23-codec 2-001a: ASoC: no dapm match for MICIN --> NULL --> Mic Input
-tlv320aic23-codec 2-001a: ASoC: Failed to add route MICIN -> NULL -> Mic Input
-tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok
 NET: Registered protocol family 17
 can: controller area network core (rev 20120528 abi 9)
 NET: Registered protocol family 29
 can: raw protocol (rev 20120528)
-mmc0: host does not support reading read-only switch, assuming write-enable
-mmc0: new high speed SDHC card at address b368
-mmcblk0: mmc0:b368 NCard 3.70 GiB 
- mmcblk0: p1
 can: broadcast manager protocol (rev 20120528 t)
 can: netlink gateway (rev 20130117) max_hops=1
 Key type dns_resolver registered
@@ -344,25 +325,29 @@
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
+mmc0: host does not support reading read-only switch, assuming write-enable
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-hub 1-1:1.0: USB hub found
-mmc1: new high speed SD card at address b368
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
-rtc-em3027 2-0056: setting system clock to 2014-12-26 16:21:10 UTC (1419610870)
-ALSA device list:
-  #0: tegra-trimslice
- mmcblk1: p1 p2
-hub 1-1:1.0: 4 ports detected
+rtc-em3027 2-0056: setting system clock to 2014-12-26 17:33:07 UTC (1419615187)
+Waiting for root device /dev/mmcblk0p1...
+mmc0: new high speed SDHC card at address b368
+mmcblk0: mmc0:b368 NCard 3.70 GiB 
+ mmcblk0: p1
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 884K (c0d65000 - c0e42000)
+Freeing unused kernel memory: 944K (c0d10000 - c0dfc000)
+mmc1: new high speed SD card at address b368
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+hub 1-1:1.0: USB hub found
+hub 1-1:1.0: 4 ports detected
+ mmcblk1: p1 p2
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
+usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2015-07-05 12:37:53.905167760 -0700
+++ /tmp/foob	2015-07-05 12:37:53.909167761 -0700
@@ -44,10 +44,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ########
-	 3.3 MiB/s
+	 #####################
+	 4 MiB/s
 done
-Bytes transferred = 4885312 (4a8b40 hex)
+Bytes transferred = 5066080 (4d4d60 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -58,7 +58,7 @@
 done
 Bytes transferred = 21130 (528a hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x4a8b40 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x4d4d60 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 02410289
@@ -69,7 +69,7 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 4.1.0-13741-gb953c0d (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jun 23 18:03:20 PDT 2015
+Linux version 4.2.0-rc1-26550-gd770e55 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jul 5 12:34:32 PDT 2015
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: Compulab TrimSlice board
@@ -78,20 +78,20 @@
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0962480, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c09c4cc0, node_mem_map eeff7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
   HighMem zone: 67584 pages, LIFO batch:15
-PERCPU: Embedded 12 pages/cpu @eefc9000 s17216 r8192 d23744 u49152
-pcpu-alloc: s17216 r8192 d23744 u49152 alloc=12*4096
+PERCPU: Embedded 11 pages/cpu @eefcb000 s15104 r8192 d21760 u45056
+pcpu-alloc: s15104 r8192 d21760 u45056 alloc=11*4096
 pcpu-alloc: [0] 0 [0] 1 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260624
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 963864K/1048576K available (6700K kernel code, 312K rwdata, 2260K rodata, 308K init, 351K bss, 19176K reserved, 65536K cma-reserved, 204800K highmem)
+Memory: 963468K/1048576K available (6941K kernel code, 346K rwdata, 2376K rodata, 312K init, 363K bss, 19572K reserved, 65536K cma-reserved, 204800K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -99,14 +99,15 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc08c8518   (8962 kB)
-      .init : 0xc08c9000 - 0xc0916000   ( 308 kB)
-      .data : 0xc0916000 - 0xc0964020   ( 313 kB)
-       .bss : 0xc0967000 - 0xc09bee14   ( 352 kB)
+      .text : 0xc0008000 - 0xc0921858   (9319 kB)
+      .init : 0xc0922000 - 0xc0970000   ( 312 kB)
+      .data : 0xc0970000 - 0xc09c6880   ( 347 kB)
+       .bss : 0xc09c9000 - 0xc0a23c54   ( 364 kB)
 Preemptible hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
+	Build-time adjustment of leaf fanout to 32.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
-RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
+RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 128 interrupts forwarded to /interrupt-controller@50041000
 L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
@@ -118,7 +119,7 @@
 L2C-310 cache controller enabled, 8 ways, 1024 kB
 L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e480001
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
-clocksource timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
 Console: colour dummy device 80x30
 Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
@@ -137,7 +138,7 @@
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
-clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
@@ -166,7 +167,7 @@
 Bluetooth: L2CAP socket layer initialized
 Bluetooth: SCO socket layer initialized
 cfg80211: Calling CRDA to update world regulatory domain
-Switched to clocksource timer_us
+clocksource: Switched to clocksource timer_us
 NET: Registered protocol family 2
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
@@ -179,7 +180,7 @@
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 64
-CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
+hw perfevents: Failed to parse /pmu/interrupt-affinity[0]
 hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
 futex hash table entries: 512 (order: 3, 32768 bytes)
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
@@ -247,7 +248,7 @@
 m25p80 spi32766.0: found s25fl008k, expected w25q80bl
 m25p80 spi32766.0: s25fl008k (1024 Kbytes)
 CAN device driver interface
-igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
@@ -343,24 +344,24 @@
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
 hub 1-1:1.0: USB hub found
 hub 1-1:1.0: 4 ports detected
-mmc1: new high speed SD card at address b368
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
- mmcblk1: p1 p2
+mmc1: new high speed SD card at address b368
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-rtc-em3027 2-0056: setting system clock to 2014-12-26 16:21:29 UTC (1419610889)
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+rtc-em3027 2-0056: setting system clock to 2014-12-26 17:33:26 UTC (1419615206)
 ALSA device list:
   #0: tegra-trimslice
+ mmcblk1: p1 p2
 kjournald starting.  Commit interval 5 seconds
-usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 EXT3-fs (mmcblk0p1): using internal journal
 EXT3-fs (mmcblk0p1): recovery complete
 EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 308K (c08c9000 - c0916000)
+Freeing unused kernel memory: 312K (c0922000 - c0970000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
+usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2015-07-05 12:37:53.913167763 -0700
+++ /tmp/foob	2015-07-05 12:37:53.917167764 -0700
@@ -37,10 +37,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ######################################
-	 3.3 MiB/s
+	 ##############################
+	 3.4 MiB/s
 done
-Bytes transferred = 6273992 (5fbbc8 hex)
+Bytes transferred = 6152088 (5ddf98 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -49,17 +49,17 @@
 Loading: *####
 	 3.3 MiB/s
 done
-Bytes transferred = 51191 (c7f7 hex)
+Bytes transferred = 51467 (c90b hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5fbbc8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5ddf98 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff0000, end 8ffff7f6 ... OK
+   Loading Device Tree to 8fff0000, end 8ffff90a ... OK
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.1.0-13741-gb953c0d (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jun 23 18:03:05 PDT 2015
+Linux version 4.2.0-rc1-26550-gd770e55 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jul 5 12:33:57 PDT 2015
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -67,20 +67,20 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0f40780, node_mem_map ee7f8000
+free_area_init_node: node 0, pgdat c0efda80, node_mem_map ee7f8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
   HighMem zone: 329472 pages, LIFO batch:31
-PERCPU: Embedded 12 pages/cpu @ee793000 s16960 r8192 d24000 u49152
-pcpu-alloc: s16960 r8192 d24000 u49152 alloc=12*4096
+PERCPU: Embedded 11 pages/cpu @ee797000 s14784 r8192 d22080 u45056
+pcpu-alloc: s14784 r8192 d22080 u45056 alloc=11*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999056K/2096128K available (8012K kernel code, 1025K rwdata, 3616K rodata, 884K init, 318K bss, 31536K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 1999332K/2096128K available (7782K kernel code, 1038K rwdata, 3508K rodata, 944K init, 327K bss, 31260K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -88,15 +88,16 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0d64184   (11633 kB)
-      .init : 0xc0d65000 - 0xc0e42000   ( 884 kB)
-      .data : 0xc0e42000 - 0xc0f42760   (1026 kB)
-       .bss : 0xc0f45000 - 0xc0f94a68   ( 319 kB)
+      .text : 0xc0208000 - 0xc0d0f9d4   (11295 kB)
+      .init : 0xc0d10000 - 0xc0dfc000   ( 944 kB)
+      .data : 0xc0dfc000 - 0xc0effa80   (1039 kB)
+       .bss : 0xc0f02000 - 0xc0f53c28   ( 328 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
+	Build-time adjustment of leaf fanout to 32.
 	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
-RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
 L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
@@ -104,12 +105,11 @@
 L2C-310 erratum 769419 enabled
 L2C-310 enabling early BRESP for Cortex-A9
 L2C-310: enabling full line of zeros but not enabled in Cortex-A9
-L2C-310 ID prefetch enabled, offset 1 lines
 L2C-310 dynamic clock gating enabled, standby mode enabled
 L2C-310 cache controller enabled, 8 ways, 1024 kB
-L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e480001
+L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e480001
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
-clocksource timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
 Console: colour dummy device 80x30
 Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=5000)
@@ -128,7 +128,7 @@
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
-clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
@@ -138,6 +138,7 @@
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 4 bytes.
 Serial: AMBA PL011 UART driver
+tegra-mc 7000f000.memory-controller: no memory timings for RAM code 3 registered
 vdd_5v_sata: Failed to request enable GPIO30: -517
 reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
 usb1_vbus: Failed to request enable GPIO238: -517
@@ -152,14 +153,11 @@
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
-media: Linux media interface: v0.10
-Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
-Advanced Linux Sound Architecture Driver Initialized.
-Switched to clocksource timer_us
+clocksource: Switched to clocksource timer_us
 NET: Registered protocol family 2
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
@@ -172,7 +170,7 @@
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 64
-CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
+hw perfevents: Failed to parse /pmu/interrupt-affinity[0]
 hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
 futex hash table entries: 1024 (order: 4, 65536 bytes)
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
@@ -181,7 +179,7 @@
 Key type id_legacy registered
 ntfs: driver 2.1.32 [Flags: R/O].
 bounce: pool size: 64 pages
-Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
 io scheduler noop registered
 io scheduler deadline registered
 io scheduler cfq registered (default)
@@ -220,7 +218,7 @@
 loop: module loaded
 m25p80 spi32766.1: w25q32 (4096 Kbytes)
 CAN device driver interface
-igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k
 igb: Copyright (c) 2007-2014 Intel Corporation.
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -241,6 +239,7 @@
 SPEAr-ehci: EHCI SPEAr driver
 ehci-st: EHCI STMicroelectronics driver
 ehci-exynos: EHCI EXYNOS driver
+ehci-atmel: EHCI Atmel driver
 tegra-ehci: Tegra EHCI driver
 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 ohci-pci: OHCI PCI platform driver
@@ -248,15 +247,13 @@
 ohci-omap3: OHCI OMAP3 driver
 SPEAr-ohci: OHCI SPEAr driver
 ohci-st: OHCI STMicroelectronics driver
+ohci-atmel: OHCI Atmel driver
 usbcore: registered new interface driver usb-storage
 mousedev: PS/2 mouse device common for all mice
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
 i2c /dev entries driver
-usbcore: registered new interface driver uvcvideo
-USB Video Class driver (1.1.1)
-gspca_main: v2.14.0 registered
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 Synopsys Designware Multimedia Card Interface Driver
@@ -274,17 +271,6 @@
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-usbcore: registered new interface driver snd-usb-audio
-mmc1: new high speed MMC card at address 0001
-mmcblk0: mmc1:0001 SEM16G 14.8 GiB 
-mmcblk0boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
-mmcblk0boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
-mmcblk0rpmb: mmc1:0001 SEM16G partition 3 128 KiB
-Primary GPT is invalid, using alternate GPT.
- mmcblk0: p1 p2 p3 p4 p5
-tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
-tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
-input: NVIDIA Tegra Beaver Headphones as /devices/soc0/sound/sound/card0/input0
 NET: Registered protocol family 17
 can: controller area network core (rev 20120528 abi 9)
 NET: Registered protocol family 29
@@ -298,7 +284,14 @@
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
 tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
+mmc1: new high speed MMC card at address 0001
+mmcblk0: mmc1:0001 SEM16G 14.8 GiB 
+mmcblk0boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
+mmcblk0boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
+mmcblk0rpmb: mmc1:0001 SEM16G partition 3 128 KiB
 tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
+Primary GPT is invalid, using alternate GPT.
+ mmcblk0: p1 p2 p3 p4 p5
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
@@ -337,7 +330,7 @@
 pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf00e8000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf00d6000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 vdd_1v8_gen: supplied by vdd_5v_in
@@ -366,15 +359,13 @@
 tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
 usb1_vbus: disabling
 vdd_sata,avdd_plle: disabling
-ALSA device list:
-  #0: NVIDIA Tegra Beaver
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 884K (c0d65000 - c0e42000)
+Freeing unused kernel memory: 944K (c0d10000 - c0dfc000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.218870] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.783382] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2015-07-05 12:37:53.925167766 -0700
+++ /tmp/foob	2015-07-05 12:37:53.925167766 -0700
@@ -36,24 +36,24 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ########
-	 3 MiB/s
+	 #####################
+	 3.4 MiB/s
 done
-Bytes transferred = 4885312 (4a8b40 hex)
+Bytes transferred = 5066080 (4d4d60 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.7 MiB/s
+	 3.1 MiB/s
 done
-Bytes transferred = 51191 (c7f7 hex)
+Bytes transferred = 51467 (c90b hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x4a8b40 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x4d4d60 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff0000, end 8ffff7f6 ... OK
+   Loading Device Tree to 8fff0000, end 8ffff90a ... OK
 
 Starting kernel ...
 
@@ -61,7 +61,7 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 4.1.0-13741-gb953c0d (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Tue Jun 23 18:03:20 PDT 2015
+Linux version 4.2.0-rc1-26550-gd770e55 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jul 5 12:34:32 PDT 2015
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -69,20 +69,20 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0962480, node_mem_map ee7f7000
+free_area_init_node: node 0, pgdat c09c4cc0, node_mem_map ee7f7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
   HighMem zone: 329472 pages, LIFO batch:31
-PERCPU: Embedded 12 pages/cpu @ee792000 s17216 r8192 d23744 u49152
-pcpu-alloc: s17216 r8192 d23744 u49152 alloc=12*4096
+PERCPU: Embedded 11 pages/cpu @ee796000 s15104 r8192 d21760 u45056
+pcpu-alloc: s15104 r8192 d21760 u45056 alloc=11*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2002976K/2096128K available (6700K kernel code, 312K rwdata, 2260K rodata, 308K init, 351K bss, 27616K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 2002588K/2096128K available (6941K kernel code, 346K rwdata, 2376K rodata, 312K init, 363K bss, 28004K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -90,12 +90,13 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc08c8518   (8962 kB)
-      .init : 0xc08c9000 - 0xc0916000   ( 308 kB)
-      .data : 0xc0916000 - 0xc0964020   ( 313 kB)
-       .bss : 0xc0967000 - 0xc09bee14   ( 352 kB)
+      .text : 0xc0008000 - 0xc0921858   (9319 kB)
+      .init : 0xc0922000 - 0xc0970000   ( 312 kB)
+      .data : 0xc0970000 - 0xc09c6880   ( 347 kB)
+       .bss : 0xc09c9000 - 0xc0a23c54   ( 364 kB)
 Preemptible hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
+	Build-time adjustment of leaf fanout to 32.
 NR_IRQS:16 nr_irqs:16 16
 /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
 L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
@@ -103,12 +104,11 @@
 L2C-310 erratum 769419 enabled
 L2C-310 enabling early BRESP for Cortex-A9
 L2C-310: enabling full line of zeros but not enabled in Cortex-A9
-L2C-310 ID prefetch enabled, offset 1 lines
 L2C-310 dynamic clock gating enabled, standby mode enabled
 L2C-310 cache controller enabled, 8 ways, 1024 kB
-L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e480001
+L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e480001
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
-clocksource timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
+clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
 Console: colour dummy device 80x30
 Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
@@ -129,7 +129,7 @@
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
-clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
@@ -138,6 +138,7 @@
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 4 bytes.
+tegra-mc 7000f000.memory-controller: no memory timings for RAM code 3 registered
 vdd_5v_sata: Failed to request enable GPIO30: -517
 reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
 usb1_vbus: Failed to request enable GPIO238: -517
@@ -164,7 +165,7 @@
 Bluetooth: L2CAP socket layer initialized
 Bluetooth: SCO socket layer initialized
 cfg80211: Calling CRDA to update world regulatory domain
-Switched to clocksource timer_us
+clocksource: Switched to clocksource timer_us
 NET: Registered protocol family 2
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
@@ -177,7 +178,7 @@
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 64
-CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
+hw perfevents: Failed to parse /pmu/interrupt-affinity[0]
 hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
 futex hash table entries: 1024 (order: 4, 65536 bytes)
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
@@ -215,7 +216,7 @@
 loop: module loaded
 m25p80 spi32766.1: w25q32 (4096 Kbytes)
 CAN device driver interface
-igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k
 igb: Copyright (c) 2007-2014 Intel Corporation.
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -243,6 +244,7 @@
 usbcore: registered new interface driver uvcvideo
 USB Video Class driver (1.1.1)
 gspca_main: v2.14.0 registered
+tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0)
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
@@ -360,14 +362,14 @@
 vdd_sata,avdd_plle: disabling
 ALSA device list:
   #0: NVIDIA Tegra Beaver
-EXT3-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended
 kjournald starting.  Commit interval 5 seconds
+EXT3-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended
 EXT3-fs (mmcblk0p1): using internal journal
 EXT3-fs (mmcblk0p1): recovery complete
 EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 308K (c08c9000 - c0916000)
+Freeing unused kernel memory: 312K (c0922000 - c0970000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.486506] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.436734] usb 2-1: new high-speed USB device number 2 using tegra-ehci
