U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 3.5 MiB/s done Bytes transferred = 6383728 (616870 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.4 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x616870 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.16.0-rc1-230585-g7928b2c (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Feb 11 15:35:30 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998484K/2097148K available (9216K kernel code, 783K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 784 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008020] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017552] Switching to timer-based delay loop, resolution 1000ns [ 0.024070] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029773] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040520] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048492] Switching to timer-based delay loop, resolution 83ns [ 0.054671] Console: colour dummy device 80x30 [ 0.058899] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069209] pid_max: default: 32768 minimum: 301 [ 0.073973] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080391] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087722] CPU: Testing write buffer coherency: ok [ 0.092405] /cpus/cpu@0 missing clock-frequency property [ 0.097554] /cpus/cpu@1 missing clock-frequency property [ 0.102850] /cpus/cpu@2 missing clock-frequency property [ 0.108128] /cpus/cpu@3 missing clock-frequency property [ 0.113410] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153454] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158108] Hierarchical SRCU implementation. [ 0.173666] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193457] smp: Bringing up secondary CPUs ... [ 0.243755] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323782] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403823] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413600] smp: Brought up 1 node, 4 CPUs [ 0.432684] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438837] CPU: All CPU(s) started in SVC mode. [ 0.444127] devtmpfs: initialized [ 0.453163] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.459057] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.468699] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.475387] pinctrl core: initialized pinctrl subsystem [ 0.480522] NET: Registered protocol family 16 [ 0.485019] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.491764] cpuidle: using governor menu [ 0.502666] No ATAGs? [ 0.502726] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.511066] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.517758] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.525428] iommu: Adding device 50000000.host1x to group 0 [ 0.530843] iommu: Adding device 54200000.dc to group 1 [ 0.536043] iommu: Adding device 54240000.dc to group 1 [ 0.541242] iommu: Adding device 57000000.gpu to group 2 [ 0.552348] +5V_SYS: supplied by +VDD_MUX [ 0.554576] +3.3V_SYS: supplied by +VDD_MUX [ 0.558900] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.564234] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.572337] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.578273] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.586387] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.592140] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.600241] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.606007] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.614172] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.621000] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.629188] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.635040] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.643629] vgaarb: loaded [ 0.646139] SCSI subsystem initialized [ 0.649696] libata version 3.00 loaded. [ 0.653540] usbcore: registered new interface driver usbfs [ 0.658897] usbcore: registered new interface driver hub [ 0.664204] usbcore: registered new device driver usb [ 0.670409] Linux video capture interface: v2.00 [ 0.673807] pps_core: LinuxPPS API ver. 1 registered [ 0.678730] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.687831] PTP clock support registered [ 0.691867] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.699092] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.705261] Advanced Linux Sound Architecture Driver Initialized. [ 0.711467] Bluetooth: Core ver 2.22 [ 0.714792] NET: Registered protocol family 31 [ 0.719200] Bluetooth: HCI device and connection manager initialized [ 0.725522] Bluetooth: HCI socket layer initialized [ 0.730379] Bluetooth: L2CAP socket layer initialized [ 0.735414] Bluetooth: SCO socket layer initialized [ 0.740511] clocksource: Switched to clocksource arch_sys_counter [ 0.778439] NET: Registered protocol family 2 [ 0.781266] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.788528] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.795574] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.802005] TCP: Hash tables configured (established 8192 bind 8192) [ 0.808444] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.814181] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.820613] NET: Registered protocol family 1 [ 0.835127] RPC: Registered named UNIX socket transport module. [ 0.839124] RPC: Registered udp transport module. [ 0.843816] RPC: Registered tcp transport module. [ 0.848485] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.855150] PCI: CLS 0 bytes, default 64 [ 0.859489] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.867597] Initialise system trusted keyrings [ 0.871448] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.878255] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.883879] NFS: Registering the id_resolver key type [ 0.888617] Key type id_resolver registered [ 0.892783] Key type id_legacy registered [ 0.898489] Key type asymmetric registered [ 0.900844] Asymmetric key parser 'x509' registered [ 0.905735] bounce: pool size: 64 pages [ 0.909522] io scheduler noop registered (default) [ 0.914285] io scheduler mq-deadline registered [ 0.918771] io scheduler kyber registered [ 0.923410] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.935879] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.941964] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.950761] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.957542] console [ttyS0] disabled [ 0.960434] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.969372] console [ttyS0] enabled [ 0.969372] console [ttyS0] enabled [ 0.975627] bootconsole [earlycon0] disabled [ 0.975627] bootconsole [earlycon0] disabled [ 1.001693] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.008169] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.015671] panel-simple panel: panel supply power not found, using dummy regulator [ 1.027075] loop: module loaded [ 1.030766] as3722 4-0040: AS3722 with revision 0x1 found [ 1.040824] as3722-sd2: supplied by +5V_SYS [ 1.045243] as3722-sd3: supplied by +5V_SYS [ 1.049579] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.055781] as3722-sd4: supplied by +5V_SYS [ 1.060114] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.065869] as3722-sd5: supplied by +5V_SYS [ 1.071463] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.077209] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.083230] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.088858] as3722-ldo3: supplied by +3.3V_SYS [ 1.093321] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.100896] as3722-ldo4: supplied by +3.3V_SYS [ 1.105492] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.111519] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.116290] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.122989] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.129023] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.133804] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.140358] as3722-ldo9: supplied by +5V_SYS [ 1.144936] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.151147] as3722-ldo10: supplied by +5V_SYS [ 1.155660] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.162111] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.184398] cros-ec-spi spi0.0: Chrome EC device registered [ 1.199300] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.214823] libphy: Fixed MDIO Bus: probed [ 1.218908] CAN device driver interface [ 1.222762] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.229705] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.235346] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.242757] usbcore: registered new interface driver pegasus [ 1.248422] usbcore: registered new interface driver asix [ 1.253830] usbcore: registered new interface driver ax88179_178a [ 1.259924] usbcore: registered new interface driver cdc_ether [ 1.265777] usbcore: registered new interface driver smsc75xx [ 1.271543] usbcore: registered new interface driver smsc95xx [ 1.277294] usbcore: registered new interface driver net1080 [ 1.282961] usbcore: registered new interface driver cdc_subset [ 1.288882] usbcore: registered new interface driver zaurus [ 1.294473] usbcore: registered new interface driver cdc_ncm [ 1.300205] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.306721] ehci-pci: EHCI PCI platform driver [ 1.311177] tegra-ehci: Tegra EHCI driver [ 1.315436] usbcore: registered new interface driver cdc_acm [ 1.321086] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.329092] usbcore: registered new interface driver cdc_wdm [ 1.334770] usbcore: registered new interface driver usb-storage [ 1.341430] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.361042] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.367900] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.374660] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.381805] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.388086] i2c /dev entries driver [ 1.391991] usbcore: registered new interface driver uvcvideo [ 1.397721] USB Video Class driver (1.1.1) [ 1.401814] gspca_main: v2.14.0 registered [ 1.406128] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.414807] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.423146] sdhci: Secure Digital Host Controller Interface driver [ 1.429310] sdhci: Copyright(c) Pierre Ossman [ 1.433667] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.439437] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.453241] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.458111] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.478645] mmc0: Unknown controller version (3). You may experience problems. [ 1.485886] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.522663] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.530375] usbcore: registered new interface driver usbhid [ 1.536055] usbhid: USB HID core driver [ 1.542147] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.590407] mmc0: new high speed MMC card at address 0001 [ 1.596329] max98090 0-0010: MAX98090 REVID=0x43 [ 1.597752] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.607109] max98090 0-0010: use default 2.8v micbias [ 1.607330] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.619938] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.625980] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.626160] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.640874] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.642749] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.648853] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.662821] NET: Registered protocol family 10 [ 1.667857] Segment Routing with IPv6 [ 1.671587] mip6: Mobile IPv6 [ 1.674546] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.680999] NET: Registered protocol family 17 [ 1.685435] NET: Registered protocol family 15 [ 1.689865] can: controller area network core (rev 20170425 abi 9) [ 1.696110] NET: Registered protocol family 29 [ 1.700550] can: raw protocol (rev 20170425) [ 1.704807] can: broadcast manager protocol (rev 20170425 t) [ 1.710453] can: netlink gateway (rev 20170425) max_hops=1 [ 1.716001] Bluetooth: RFCOMM socket layer initialized [ 1.721145] Bluetooth: RFCOMM ver 1.11 [ 1.724887] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.730186] Bluetooth: BNEP socket layer initialized [ 1.735141] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.741054] Bluetooth: HIDP socket layer initialized [ 1.746101] Key type dns_resolver registered [ 1.750567] Registering SWP/SWPB emulation handler [ 1.755607] Loading compiled-in X.509 certificates [ 1.767531] +3.3V_RUN: supplied by +3.3V_SYS [ 1.772472] +VDD_LED: supplied by +VDD_MUX [ 1.776674] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.782411] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.787115] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.791855] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.797032] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.801762] +5V_USB_HS: supplied by +5V_SYS [ 1.806078] +5V_USB_SS: supplied by +5V_SYS [ 1.811237] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.816666] +3.3V_LP0: supplied by +3.3V_SYS [ 1.821697] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.827525] +5V_HDMI_CON: supplied by +5V_SYS [ 1.832625] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.839358] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.852449] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.858661] panel-simple panel: panel supply power not found, using dummy regulator [ 1.931244] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.938640] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.944079] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.953612] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.962241] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.968619] hub 1-0:1.0: USB hub found [ 1.972447] hub 1-0:1.0: 6 ports detected [ 1.976817] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.982220] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.989884] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.998382] hub 2-0:1.0: USB hub found [ 2.002194] hub 2-0:1.0: 2 ports detected [ 2.007225] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.020737] mmc1: Unknown controller version (3). You may experience problems. [ 2.027981] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.034473] mmc1: Switching to 3.3V signalling voltage failed [ 2.063258] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.070894] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.075765] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.086004] mmc2: Unknown controller version (3). You may experience problems. [ 2.093340] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.128356] mmc1: new high speed SDIO card at address 0001 [ 2.134133] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.141736] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.147897] panel-simple panel: panel supply power not found, using dummy regulator [ 2.156021] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.162662] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.168882] panel-simple panel: panel supply power not found, using dummy regulator [ 2.176814] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822) [ 2.185617] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.197311] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.204036] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.205480] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.212668] cfg80211: failed to load regulatory.db [ 2.222086] +1.8V_RUN_CAM: disabling [ 2.225911] +1.2V_RUN_CAM_FRONT: disabling [ 2.230283] +1.05V_RUN_CAM_REAR: disabling [ 2.234688] +2.8V_RUN_TOUCH: disabling [ 2.238712] +2.8V_RUN_CAM_AF: disabling [ 2.242838] +1.8V_RUN_VPP_FUSE: disabling [ 2.247077] +VDD_LED: disabling [ 2.250212] +5V_VDD_TS_SW: disabling [ 2.253851] +3.3V_PANEL: disabling [ 2.257292] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.261869] +5V_HDMI_CON: disabling [ 2.265356] ALSA device list: [ 2.268317] #1: GoogleNyanBig [ 2.301059] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.307173] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.307540] panel-simple panel: panel supply power not found, using dummy regulator [ 2.323129] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.340548] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.372236] mmc2: new high speed SDHC card at address 0007 [ 2.379569] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.393349] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.399522] GPT:3014591 != 15564799 [ 2.403035] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.410415] GPT:3014591 != 15564799 [ 2.413908] GPT: Use GNU Parted to correct GPT errors. [ 2.419057] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.426186] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.432431] panel-simple panel: panel supply power not found, using dummy regulator [ 2.663345] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.678131] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.687620] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.693784] panel-simple panel: panel supply power not found, using dummy regulator [ 2.789310] EXT4-fs (mmcblk0p3): recovery complete [ 2.794137] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.802242] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.809271] devtmpfs: mounted [ 2.812708] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 3.030602] usb 1-3: new high-speed USB device number 3 using tegra-xusb mount -t sysfs none /sys [ 3.689764] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.700905] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.707142] panel-simple panel: panel supply power not found, using dummy regulator root@(none):/# root@(none):/# [ 4.050601] usb 1-1: new high-speed USB device number 4 using tegra-xusb [ 4.238872] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.245613] scsi host0: usb-storage 1-1:1.0 [ 4.250217] tegra-sor 54540000.sor: failed to probe output: -517 [ 4.256476] panel-simple panel: panel supply power not found, using dummy regulator mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# [ 5.312271] scsi 0:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [ 5.320993] tegra-sor 54540000.sor: failed to probe output: -517 [ 5.327215] panel-simple panel: panel supply power not found, using dummy regulator [ 5.518131] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.95 GB/7.40 GiB) [ 5.526658] sd 0:0:0:0: [sda] Write Protect is off [ 5.531481] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 5.537506] sd 0:0:0:0: [sda] No Caching mode page found [ 5.542850] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.571320] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 [ 5.583139] sd 0:0:0:0: [sda] Attached SCSI removable disk rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:27 1970 [ 5.711126] PM: suspend entry (deep) [ 5.714695] PM: Syncing filesystems ... done. [ 5.720627] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.728716] OOM killer disabled. [ 5.731992] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.740585] Suspending console(s) (use no_console_suspend to debug) [ 5.934415] Disabling non-boot CPUs ... [ 5.990718] IRQ17 no longer affine to CPU1 [ 6.101340] Entering suspend state LP1 [ 6.101365] Enabling non-boot CPUs ... [ 6.102110] CPU1 is up [ 6.102763] CPU2 is up [ 6.103461] CPU3 is up [ 6.154432] cros-ec-spi spi0.0: spi transfer failed: -121 [ 6.166545] mmc1: Switching to 3.3V signalling voltage failed [ 6.710941] tegra-sor 54540000.sor: failed to probe output: -517 [ 6.711167] panel-simple panel: panel supply power not found, using dummy regulator [ 6.743276] OOM killer enabled. [ 6.746405] Restarting tasks ... done. [ 6.751048] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:32 1970 [ 7.959246] PM: suspend entry (deep) [ 7.962834] PM: Syncing filesystems ... done. [ 7.968373] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.976458] OOM killer disabled. [ 7.979674] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.988239] Suspending console(s) (use no_console_suspend to debug) [ 8.174890] Disabling non-boot CPUs ... [ 8.321154] Entering suspend state LP1 [ 8.321180] Enabling non-boot CPUs ... [ 8.321960] CPU1 is up [ 8.322621] CPU2 is up [ 8.323335] CPU3 is up [ 8.374500] cros-ec-spi spi0.0: spi transfer failed: -121 [ 8.386552] mmc1: Switching to 3.3V signalling voltage failed [ 8.913580] tegra-sor 54540000.sor: failed to probe output: -517 [ 8.913749] panel-simple panel: panel supply power not found, using dummy regulator [ 8.957171] OOM killer enabled. [ 8.960301] Restarting tasks ... done. [ 8.964679] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:37 1970 [ 10.179248] PM: suspend entry (deep) [ 10.182838] PM: Syncing filesystems ... done. [ 10.188476] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.196615] OOM killer disabled. [ 10.199835] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.208455] Suspending console(s) (use no_console_suspend to debug) [ 10.394452] Disabling non-boot CPUs ... [ 10.561145] Entering suspend state LP1 [ 10.561170] Enabling non-boot CPUs ... [ 10.561954] CPU1 is up [ 10.562614] CPU2 is up [ 10.563324] CPU3 is up [ 10.614384] cros-ec-spi spi0.0: spi transfer failed: -121 [ 10.626438] mmc1: Switching to 3.3V signalling voltage failed [ 10.840890] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 11.154954] tegra-sor 54540000.sor: failed to probe output: -517 [ 11.155122] panel-simple panel: panel supply power not found, using dummy regulator [ 11.205381] OOM killer enabled. [ 11.208510] Restarting tasks ... done. [ 11.212732] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:42 1970 [ 12.419306] PM: suspend entry (deep) [ 12.422894] PM: Syncing filesystems ... done. [ 12.428433] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.436612] OOM killer disabled. [ 12.439828] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.448407] Suspending console(s) (use no_console_suspend to debug) [ 12.634333] Disabling non-boot CPUs ... [ 12.801135] Entering suspend state LP1 [ 12.801160] Enabling non-boot CPUs ... [ 12.801943] CPU1 is up [ 12.802601] CPU2 is up [ 12.803315] CPU3 is up [ 12.854377] cros-ec-spi spi0.0: spi transfer failed: -121 [ 12.866470] mmc1: Switching to 3.3V signalling voltage failed [ 13.394393] tegra-sor 54540000.sor: failed to probe output: -517 [ 13.394565] panel-simple panel: panel supply power not found, using dummy regulator [ 13.437943] OOM killer enabled. [ 13.441084] Restarting tasks ... done. [ 13.445309] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:47 1970 [ 14.658325] PM: suspend entry (deep) [ 14.661901] PM: Syncing filesystems ... done. [ 14.667361] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.675442] OOM killer disabled. [ 14.678658] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.687237] Suspending console(s) (use no_console_suspend to debug) [ 14.874175] Disabling non-boot CPUs ... [ 15.041090] Entering suspend state LP1 [ 15.041116] Enabling non-boot CPUs ... [ 15.041898] CPU1 is up [ 15.042554] CPU2 is up [ 15.043266] CPU3 is up [ 15.094361] cros-ec-spi spi0.0: spi transfer failed: -121 [ 15.106405] mmc1: Switching to 3.3V signalling voltage failed [ 15.635283] tegra-sor 54540000.sor: failed to probe output: -517 [ 15.635452] panel-simple panel: panel supply power not found, using dummy regulator [ 15.678828] OOM killer enabled. [ 15.681970] Restarting tasks ... done. [ 15.686167] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:52 1970 [ 16.898309] PM: suspend entry (deep) [ 16.901885] PM: Syncing filesystems ... done. [ 16.907356] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.915531] OOM killer disabled. [ 16.918748] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.927345] Suspending console(s) (use no_console_suspend to debug) [ 17.114360] Disabling non-boot CPUs ... [ 17.281081] Entering suspend state LP1 [ 17.281106] Enabling non-boot CPUs ... [ 17.281889] CPU1 is up [ 17.282546] CPU2 is up [ 17.283256] CPU3 is up [ 17.334337] cros-ec-spi spi0.0: spi transfer failed: -121 [ 17.346388] mmc1: Switching to 3.3V signalling voltage failed [ 17.560855] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 17.875528] tegra-sor 54540000.sor: failed to probe output: -517 [ 17.875695] panel-simple panel: panel supply power not found, using dummy regulator [ 17.925937] OOM killer enabled. [ 17.929066] Restarting tasks ... done. [ 17.933350] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:57 1970 [ 19.140393] PM: suspend entry (deep) [ 19.143960] PM: Syncing filesystems ... done. [ 19.149706] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 19.157793] OOM killer disabled. [ 19.161024] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 19.169583] Suspending console(s) (use no_console_suspend to debug) [ 19.353974] Disabling non-boot CPUs ... [ 19.531095] Entering suspend state LP1 [ 19.531120] Enabling non-boot CPUs ... [ 19.531910] CPU1 is up [ 19.532569] CPU2 is up [ 19.533276] CPU3 is up [ 19.584293] cros-ec-spi spi0.0: spi transfer failed: -121 [ 19.596537] mmc1: Switching to 3.3V signalling voltage failed [ 19.810861] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 20.125355] tegra-sor 54540000.sor: failed to probe output: -517 [ 20.125525] panel-simple panel: panel supply power not found, using dummy regulator [ 20.175768] OOM killer enabled. [ 20.178908] Restarting tasks ... done. [ 20.183135] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:02 1970 [ 21.388441] PM: suspend entry (deep) [ 21.392071] PM: Syncing filesystems ... done. [ 21.397522] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 21.405623] OOM killer disabled. [ 21.408839] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 21.417422] Suspending console(s) (use no_console_suspend to debug) [ 21.604509] Disabling non-boot CPUs ... [ 21.771001] Entering suspend state LP1 [ 21.771026] Enabling non-boot CPUs ... [ 21.771813] CPU1 is up [ 21.772471] CPU2 is up [ 21.773184] CPU3 is up [ 21.824254] cros-ec-spi spi0.0: spi transfer failed: -121 [ 21.836517] mmc1: Switching to 3.3V signalling voltage failed [ 22.050814] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 22.861061] tegra-sor 54540000.sor: failed to probe output: -517 [ 22.861230] panel-simple panel: panel supply power not found, using dummy regulator [ 22.911481] OOM killer enabled. [ 22.914610] Restarting tasks ... done. [ 22.918857] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:07 1970 [ 23.628140] PM: suspend entry (deep) [ 23.631723] PM: Syncing filesystems ... done. [ 23.637173] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 23.645255] OOM killer disabled. [ 23.648471] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 23.657052] Suspending console(s) (use no_console_suspend to debug) [ 23.844284] Disabling non-boot CPUs ... [ 24.010980] Entering suspend state LP1 [ 24.011005] Enabling non-boot CPUs ... [ 24.011793] CPU1 is up [ 24.012457] CPU2 is up [ 24.013169] CPU3 is up [ 24.064288] cros-ec-spi spi0.0: spi transfer failed: -121 [ 24.076616] mmc1: Switching to 3.3V signalling voltage failed [ 24.290773] usb 1-1: reset high-speed USB device number 4 using tegra-xusb [ 24.604156] tegra-sor 54540000.sor: failed to probe output: -517 [ 24.604325] panel-simple panel: panel supply power not found, using dummy regulator [ 24.654558] OOM killer enabled. [ 24.657687] Restarting tasks ... done. [ 24.662092] PM: suspend exit root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:12 1970 [ 25.868197] PM: suspend entry (deep) [ 25.871773] PM: Syncing filesystems ... done. [ 25.877238] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 25.885320] OOM killer disabled. [ 25.888536] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 25.897119] Suspending console(s) (use no_console_suspend to debug) [ 26.084292] Disabling non-boot CPUs ... [ 26.250949] Entering suspend state LP1 [ 26.250974] Enabling non-boot CPUs ... [ 26.251760] CPU1 is up [ 26.252423] CPU2 is up [ 26.253135] CPU3 is up [ 26.294270] cros-ec-spi spi0.0: spi transfer failed: -121 [ 26.306534] mmc1: Switching to 3.3V signalling voltage failed [ 26.835877] tegra-sor 54540000.sor: failed to probe output: -517 [ 26.836045] panel-simple panel: panel supply power not found, using dummy regulator [ 26.879472] OOM killer enabled. [ 26.882632] Restarting tasks ... done. [ 26.886907] PM: suspend exit root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE