U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB : Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################# 3.3 MiB/s done Bytes transferred = 6383728 (616870 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.104 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.2 MiB/s done Bytes transferred = 67482 (1079a hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x616870 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013799 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.16.0-rc1-230585-g7928b2c (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Feb 11 15:35:30 PST 2018 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt: Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632 [ 0.000000] pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998484K/2097148K available (9216K kernel code, 783K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 784 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 299 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000004] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.008021] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.017553] Switching to timer-based delay loop, resolution 1000ns [ 0.024069] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029774] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.040521] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.048492] Switching to timer-based delay loop, resolution 83ns [ 0.054673] Console: colour dummy device 80x30 [ 0.058901] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.069209] pid_max: default: 32768 minimum: 301 [ 0.073973] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.080392] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087723] CPU: Testing write buffer coherency: ok [ 0.092402] /cpus/cpu@0 missing clock-frequency property [ 0.097555] /cpus/cpu@1 missing clock-frequency property [ 0.102852] /cpus/cpu@2 missing clock-frequency property [ 0.108129] /cpus/cpu@3 missing clock-frequency property [ 0.113411] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.153454] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.158109] Hierarchical SRCU implementation. [ 0.173671] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.193457] smp: Bringing up secondary CPUs ... [ 0.243758] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323784] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403824] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413600] smp: Brought up 1 node, 4 CPUs [ 0.432684] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438837] CPU: All CPU(s) started in SVC mode. [ 0.444130] devtmpfs: initialized [ 0.453139] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.459043] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.468673] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.475365] pinctrl core: initialized pinctrl subsystem [ 0.480499] NET: Registered protocol family 16 [ 0.484999] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.491742] cpuidle: using governor menu [ 0.502656] No ATAGs? [ 0.502717] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.511058] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.517740] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.525418] iommu: Adding device 50000000.host1x to group 0 [ 0.530833] iommu: Adding device 54200000.dc to group 1 [ 0.536034] iommu: Adding device 54240000.dc to group 1 [ 0.541235] iommu: Adding device 57000000.gpu to group 2 [ 0.552323] +5V_SYS: supplied by +VDD_MUX [ 0.554552] +3.3V_SYS: supplied by +VDD_MUX [ 0.558875] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.564210] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.572312] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.578249] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.586362] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.592116] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.600218] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.605982] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.614150] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.620976] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.629163] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.635015] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.643605] vgaarb: loaded [ 0.646117] SCSI subsystem initialized [ 0.649665] libata version 3.00 loaded. [ 0.653514] usbcore: registered new interface driver usbfs [ 0.658873] usbcore: registered new interface driver hub [ 0.664180] usbcore: registered new device driver usb [ 0.670388] Linux video capture interface: v2.00 [ 0.673782] pps_core: LinuxPPS API ver. 1 registered [ 0.678706] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.687807] PTP clock support registered [ 0.691842] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.699067] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.705237] Advanced Linux Sound Architecture Driver Initialized. [ 0.711440] Bluetooth: Core ver 2.22 [ 0.714767] NET: Registered protocol family 31 [ 0.719176] Bluetooth: HCI device and connection manager initialized [ 0.725498] Bluetooth: HCI socket layer initialized [ 0.730355] Bluetooth: L2CAP socket layer initialized [ 0.735391] Bluetooth: SCO socket layer initialized [ 0.740480] clocksource: Switched to clocksource arch_sys_counter [ 0.778470] NET: Registered protocol family 2 [ 0.781294] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.788558] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.795604] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.802037] TCP: Hash tables configured (established 8192 bind 8192) [ 0.808476] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.814212] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.820645] NET: Registered protocol family 1 [ 0.835157] RPC: Registered named UNIX socket transport module. [ 0.839154] RPC: Registered udp transport module. [ 0.843846] RPC: Registered tcp transport module. [ 0.848514] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.855183] PCI: CLS 0 bytes, default 64 [ 0.859527] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.867630] Initialise system trusted keyrings [ 0.871474] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.878286] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.883908] NFS: Registering the id_resolver key type [ 0.888648] Key type id_resolver registered [ 0.892813] Key type id_legacy registered [ 0.898533] Key type asymmetric registered [ 0.900871] Asymmetric key parser 'x509' registered [ 0.905764] bounce: pool size: 64 pages [ 0.909554] io scheduler noop registered (default) [ 0.914315] io scheduler mq-deadline registered [ 0.918801] io scheduler kyber registered [ 0.923440] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.935894] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.941980] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.950777] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.957556] console [ttyS0] disabled [ 0.960450] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 0.969389] console [ttyS0] enabled [ 0.969389] console [ttyS0] enabled [ 0.975640] bootconsole [earlycon0] disabled [ 0.975640] bootconsole [earlycon0] disabled [ 1.001714] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.008190] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.015694] panel-simple panel: panel supply power not found, using dummy regulator [ 1.027087] loop: module loaded [ 1.030805] as3722 4-0040: AS3722 with revision 0x1 found [ 1.040865] as3722-sd2: supplied by +5V_SYS [ 1.045285] as3722-sd3: supplied by +5V_SYS [ 1.049621] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.055811] as3722-sd4: supplied by +5V_SYS [ 1.060145] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.065901] as3722-sd5: supplied by +5V_SYS [ 1.071499] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.077248] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.083269] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.088899] as3722-ldo3: supplied by +3.3V_SYS [ 1.093363] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.100939] as3722-ldo4: supplied by +3.3V_SYS [ 1.105537] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.111564] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.116334] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.123033] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.129067] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.133849] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.140403] as3722-ldo9: supplied by +5V_SYS [ 1.144981] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.151190] as3722-ldo10: supplied by +5V_SYS [ 1.155702] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.162151] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.184504] cros-ec-spi spi0.0: Chrome EC device registered [ 1.199408] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.214931] libphy: Fixed MDIO Bus: probed [ 1.219016] CAN device driver interface [ 1.222868] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.229812] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.235452] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.242865] usbcore: registered new interface driver pegasus [ 1.248530] usbcore: registered new interface driver asix [ 1.253939] usbcore: registered new interface driver ax88179_178a [ 1.260033] usbcore: registered new interface driver cdc_ether [ 1.265885] usbcore: registered new interface driver smsc75xx [ 1.271650] usbcore: registered new interface driver smsc95xx [ 1.277401] usbcore: registered new interface driver net1080 [ 1.283070] usbcore: registered new interface driver cdc_subset [ 1.288990] usbcore: registered new interface driver zaurus [ 1.294581] usbcore: registered new interface driver cdc_ncm [ 1.300314] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.306832] ehci-pci: EHCI PCI platform driver [ 1.311287] tegra-ehci: Tegra EHCI driver [ 1.315548] usbcore: registered new interface driver cdc_acm [ 1.321198] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.329204] usbcore: registered new interface driver cdc_wdm [ 1.334881] usbcore: registered new interface driver usb-storage [ 1.341543] input: cros_ec as /devices/soc0/7000d400.spi/spi_master/spi0/spi0.0/7000d400.spi:cros-ec@0:keyboard-controller/input/input0 [ 1.361224] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.368083] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.374843] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.381988] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.388269] i2c /dev entries driver [ 1.392178] usbcore: registered new interface driver uvcvideo [ 1.397907] USB Video Class driver (1.1.1) [ 1.402000] gspca_main: v2.14.0 registered [ 1.406317] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.414989] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.423323] sdhci: Secure Digital Host Controller Interface driver [ 1.429488] sdhci: Copyright(c) Pierre Ossman [ 1.433843] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.439611] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.453415] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.458286] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.478614] mmc0: Unknown controller version (3). You may experience problems. [ 1.485857] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.522632] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.530341] usbcore: registered new interface driver usbhid [ 1.536021] usbhid: USB HID core driver [ 1.542112] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 1.590356] mmc0: new high speed MMC card at address 0001 [ 1.596275] max98090 0-0010: MAX98090 REVID=0x43 [ 1.597692] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.607053] max98090 0-0010: use default 2.8v micbias [ 1.607270] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.619880] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.625921] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0) [ 1.626099] tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok [ 1.640791] input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1 [ 1.642687] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.648772] input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2 [ 1.662729] NET: Registered protocol family 10 [ 1.667768] Segment Routing with IPv6 [ 1.671496] mip6: Mobile IPv6 [ 1.674455] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.680905] NET: Registered protocol family 17 [ 1.685342] NET: Registered protocol family 15 [ 1.689772] can: controller area network core (rev 20170425 abi 9) [ 1.696020] NET: Registered protocol family 29 [ 1.700450] can: raw protocol (rev 20170425) [ 1.704716] can: broadcast manager protocol (rev 20170425 t) [ 1.710363] can: netlink gateway (rev 20170425) max_hops=1 [ 1.715913] Bluetooth: RFCOMM socket layer initialized [ 1.721055] Bluetooth: RFCOMM ver 1.11 [ 1.724795] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.730094] Bluetooth: BNEP socket layer initialized [ 1.735050] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.740965] Bluetooth: HIDP socket layer initialized [ 1.746011] Key type dns_resolver registered [ 1.750460] Registering SWP/SWPB emulation handler [ 1.755507] Loading compiled-in X.509 certificates [ 1.767450] +3.3V_RUN: supplied by +3.3V_SYS [ 1.772393] +VDD_LED: supplied by +VDD_MUX [ 1.776593] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.782333] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.787038] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.791778] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.796954] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.801685] +5V_USB_HS: supplied by +5V_SYS [ 1.806002] +5V_USB_SS: supplied by +5V_SYS [ 1.811021] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.816537] +3.3V_LP0: supplied by +3.3V_SYS [ 1.821587] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.827465] +5V_HDMI_CON: supplied by +5V_SYS [ 1.832573] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 1.839305] usb3-1: usb3-1 supply vbus not found, using dummy regulator [ 1.852438] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.858651] panel-simple panel: panel supply power not found, using dummy regulator [ 1.931215] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 1.938612] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.944051] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1 [ 1.953578] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 1.962208] tegra-xusb 70090000.usb: irq 344, io mem 0x70090000 [ 1.968591] hub 1-0:1.0: USB hub found [ 1.972418] hub 1-0:1.0: 6 ports detected [ 1.976789] tegra-xusb 70090000.usb: xHCI Host Controller [ 1.982191] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 2 [ 1.989857] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.998350] hub 2-0:1.0: USB hub found [ 2.002166] hub 2-0:1.0: 2 ports detected [ 2.007181] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 2.020707] mmc1: Unknown controller version (3). You may experience problems. [ 2.027951] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.034419] mmc1: Switching to 3.3V signalling voltage failed [ 2.063229] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 2.070864] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.075736] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.085973] mmc2: Unknown controller version (3). You may experience problems. [ 2.093308] mmc2: Invalid maximum block size, assuming 512 bytes [ 2.129027] mmc1: new high speed SDIO card at address 0001 [ 2.134853] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.142455] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.148617] panel-simple panel: panel supply power not found, using dummy regulator [ 2.156736] input: gpio-keys as /devices/soc0/gpio-keys/input/input3 [ 2.163377] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.169597] panel-simple panel: panel supply power not found, using dummy regulator [ 2.177531] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 2.186336] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.196234] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.203093] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.211770] cfg80211: failed to load regulatory.db [ 2.216840] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.221434] +1.8V_RUN_CAM: disabling [ 2.225190] +1.2V_RUN_CAM_FRONT: disabling [ 2.229500] +1.05V_RUN_CAM_REAR: disabling [ 2.233840] +2.8V_RUN_TOUCH: disabling [ 2.237807] +2.8V_RUN_CAM_AF: disabling [ 2.242063] +1.8V_RUN_VPP_FUSE: disabling [ 2.246239] +VDD_LED: disabling [ 2.249438] +5V_VDD_TS_SW: disabling [ 2.253103] +3.3V_PANEL: disabling [ 2.256539] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.261140] +5V_HDMI_CON: disabling [ 2.264663] ALSA device list: [ 2.267634] #1: GoogleNyanBig [ 2.301012] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.307318] panel-simple panel: panel supply power not found, using dummy regulator [ 2.315475] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4 [ 2.323937] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.360522] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 2.395626] mmc2: new high speed SDHC card at address 0007 [ 2.402974] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.415964] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.422152] GPT:3014591 != 15564799 [ 2.425629] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.433012] GPT:3014591 != 15564799 [ 2.436488] GPT: Use GNU Parted to correct GPT errors. [ 2.441732] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.448700] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.454935] panel-simple panel: panel supply power not found, using dummy regulator [ 2.683317] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 2.698113] input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5 [ 2.707605] tegra-sor 54540000.sor: failed to probe output: -517 [ 2.713772] panel-simple panel: panel supply power not found, using dummy regulator [ 3.050572] usb 1-3: new high-speed USB device number 3 using tegra-xusb [ 3.130667] EXT4-fs (mmcblk0p3): recovery complete [ 3.180580] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 3.188692] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 3.195302] devtmpfs: mounted [ 3.198714] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 3.709875] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65 [ 3.720883] tegra-sor 54540000.sor: failed to probe output: -517 [ 3.727042] panel-simple panel: panel supply power not found, using dummy regulator [ 4.070573] usb 1-1: new high-speed USB device number 4 using tegra-xusb