Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2018-02-11 15:51:31.216459579 -0800
+++ /tmp/foob	2018-02-11 15:51:31.216459579 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd070]
-Linux version 4.15.0-217931-gd8a5b80 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 28 13:41:20 PST 2018
+Linux version 4.16.0-rc1-348826-g7928b2cbe55b (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Feb 11 15:41:38 PST 2018
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -9,7 +9,7 @@
 NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
 NUMA: NODE_DATA [mem 0x7efeb000-0x7efecaff]
 Zone ranges:
-  DMA      [mem 0x0000000040000000-0x000000007fffffff]
+  DMA32    [mem 0x0000000040000000-0x000000007fffffff]
   Normal   empty
 Movable zone start for each node
 Early memory node ranges
@@ -20,27 +20,14 @@
 psci: Using standard PSCI v0.2 function IDs
 psci: Trusted OS migration not required
 random: fast init done
-percpu: Embedded 23 pages/cpu @        (ptrval) s55168 r8192 d30848 u94208
+percpu: Embedded 24 pages/cpu @        (ptrval) s57984 r8192 d32128 u98304
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
 CPU features: enabling workaround for ARM erratum 834220
 Built 1 zonelists, mobility grouping on.  Total pages: 258048
-Policy zone: DMA
+Policy zone: DMA32
 Kernel command line: root=/dev/vda2 rw rootwait mem=1024M console=ttyAMA0,38400n8 init=/bin/bash
-Memory: 999004K/1048576K available (9404K kernel code, 1150K rwdata, 4460K rodata, 1088K init, 395K bss, 33188K reserved, 16384K cma-reserved)
-Virtual kernel memory layout:
-    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
-    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
-      .text : 0x        (ptrval) - 0x        (ptrval)   (  9408 KB)
-    .rodata : 0x        (ptrval) - 0x        (ptrval)   (  4480 KB)
-      .init : 0x        (ptrval) - 0x        (ptrval)   (  1088 KB)
-      .data : 0x        (ptrval) - 0x        (ptrval)   (  1151 KB)
-       .bss : 0x        (ptrval) - 0x        (ptrval)   (   396 KB)
-    fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
-    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
-    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
-              0xffff7e0000000000 - 0xffff7e0001000000   (    16 MB actual)
-    memory  : 0xffff800000000000 - 0xffff800040000000   (  1024 MB)
+Memory: 998056K/1048576K available (9980K kernel code, 1250K rwdata, 4628K rodata, 1152K init, 402K bss, 34136K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
@@ -59,13 +46,14 @@
 Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
 Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
 Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
-ASID allocator initialised with 65536 entries
+ASID allocator initialised with 32768 entries
 Hierarchical SRCU implementation.
 EFI services will not be available.
 smp: Bringing up secondary CPUs ...
 smp: Brought up 1 node, 1 CPU
 SMP: Total of 1 processors activated.
 CPU features: detected feature: 32-bit EL0 Support
+CPU features: detected feature: Kernel page table isolation (KPTI)
 CPU: All CPU(s) started at EL1
 alternatives: patching kernel code
 devtmpfs: initialized
@@ -75,15 +63,16 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.196:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000a0baae7f, 1 data @ 00000000dd9fcdda)
+vdso: 2 pages (1 code @ 0000000079e4d5d4, 1 data @ 00000000d8562e34)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 39, base_baud = 0) is a PL011 rev1
 console [ttyAMA0] enabled
 HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
+cryptd: max_cpu_qlen set to 1000
 ACPI: Interpreter disabled.
 vgaarb: loaded
 SCSI subsystem initialized
@@ -94,13 +83,13 @@
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
-dmi: Firmware registration failed.
 Advanced Linux Sound Architecture Driver Initialized.
 clocksource: Switched to clocksource arch_sys_counter
 VFS: Disk quotas dquot_6.6.0
 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
 pnp: PnP ACPI: disabled
 NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
 TCP established hash table entries: 8192 (order: 4, 65536 bytes)
 TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
@@ -129,27 +118,29 @@
 io scheduler mq-deadline registered
 io scheduler kyber registered
 pl061_gpio 9030000.pl061: PL061 GPIO chip @0x0000000009030000 registered
-OF: PCI: host bridge /pcie@10000000 ranges:
-OF: PCI:    IO 0x3eff0000..0x3effffff -> 0x00000000
-OF: PCI:   MEM 0x10000000..0x3efeffff -> 0x10000000
-OF: PCI:   MEM 0x8000000000..0xffffffffff -> 0x8000000000
+PCI: OF: host bridge /pcie@10000000 ranges:
+PCI: OF:    IO 0x3eff0000..0x3effffff -> 0x00000000
+PCI: OF:   MEM 0x10000000..0x3efeffff -> 0x10000000
+PCI: OF:   MEM 0x8000000000..0xffffffffff -> 0x8000000000
 pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
 pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [bus 00-0f]
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
 pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
 pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff]
+EINJ: ACPI disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
 SuperH (H)SCI(F) driver initialized
 msm_serial: driver initialized
 cacheinfo: Unable to detect cache hierarchy for CPU 0
 loop: module loaded
+virtio_blk virtio0: [vda] 6291456 512-byte logical blocks (3.22 GB/3.00 GiB)
  vda: vda1 vda2
 libphy: Fixed MDIO Bus: probed
 tun: Universal TUN/TAP device driver, 1.6
-thunder-xcv, ver 1.0
-thunder-BGX, ver 1.0
-thunder-nic, ver 1.0
+thunder_xcv, ver 1.0
+thunder_bgx, ver 1.0
+nicpf, ver 1.0
 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
 e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
@@ -183,7 +174,7 @@
 registered taskstats version 1
 Loading compiled-in X.509 certificates
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2018-01-28 21:45:10 UTC (1517175910)
+rtc-pl031 9010000.pl031: setting system clock to 2018-02-11 23:49:00 UTC (1518392940)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
@@ -192,7 +183,7 @@
 EXT4-fs (vda2): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 254:2.
 devtmpfs: mounted
-Freeing unused kernel memory: 1088K
+Freeing unused kernel memory: 1152K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 bash-4.3# 
\ No newline at end of file
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-02-11 15:51:31.256459764 -0800
+++ /tmp/foob	2018-02-11 15:51:31.256459764 -0800
@@ -39,21 +39,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##############################
+	 ####################################
 	 2.8 MiB/s
 done
-Bytes transferred = 8065536 (7b1200 hex)
+Bytes transferred = 8159744 (7c8200 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.5 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x7b1200 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7c8200 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-336172-gd8a5b80568a9 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 28 13:34:20 PST 2018
+Linux version 4.16.0-rc1-348826-g7928b2cbe55b (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Feb 11 15:35:47 PST 2018
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -77,14 +77,14 @@
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
 random: fast init done
-percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632
-pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096
+percpu: Embedded 17 pages/cpu @(ptrval) s39232 r8192 d22208 u69632
+pcpu-alloc: s39232 r8192 d22208 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992548K/2096128K available (11264K kernel code, 1602K rwdata, 4296K rodata, 2048K init, 404K bss, 38044K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992580K/2096128K available (11264K kernel code, 1570K rwdata, 4348K rodata, 2048K init, 405K bss, 38012K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -94,8 +94,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   (1603 kB)
-       .bss : 0x(ptrval) - 0x(ptrval)   ( 405 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   (1571 kB)
+       .bss : 0x(ptrval) - 0x(ptrval)   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -147,52 +147,8 @@
 hw-breakpoint: maximum watchpoint size is 8 bytes.
 Serial: AMBA PL011 UART driver
 tegra-mc 70019000.memory-controller: no memory timings for RAM code 3 registered
-iommu: Adding device reg-dummy to group 0
-iommu: Adding device 50000000.host1x to group 1
-iommu: Adding device 54140000.gr2d to group 2
-iommu: Adding device 54180000.gr3d to group 3
-iommu: Adding device 54200000.dc to group 4
-iommu: Adding device 54240000.dc to group 5
-iommu: Adding device 54280000.hdmi to group 6
-iommu: Adding device 54300000.dsi to group 7
-iommu: Adding device 60005000.timer to group 8
-iommu: Adding device 60007000.flow-controller to group 9
-iommu: Adding device 6000a000.dma to group 10
-iommu: Adding device 6000c000.ahb to group 11
-iommu: Adding device 6000d000.gpio to group 12
-iommu: Adding device 70000800.apbmisc to group 13
-iommu: Adding device 70000868.pinmux to group 14
-iommu: Adding device 70006300.serial to group 15
-iommu: Adding device 7000a000.pwm to group 16
-iommu: Adding device 7000c000.i2c to group 17
-iommu: Adding device 7000c700.i2c to group 18
-iommu: Adding device 7000d000.i2c to group 19
-iommu: Adding device 7000da00.spi to group 20
-iommu: Adding device 7000e000.rtc to group 21
-iommu: Adding device 7000e400.pmc to group 22
-iommu: Adding device 7000f800.fuse to group 23
-iommu: Adding device 70019000.memory-controller to group 24
-iommu: Adding device 70080000.ahub to group 25
-iommu: Adding device 700e3000.mipi to group 26
-iommu: Adding device 78000400.sdhci to group 27
-iommu: Adding device 78000600.sdhci to group 28
-iommu: Adding device 7d000000.usb to group 29
-iommu: Adding device 7d000000.usb-phy to group 30
-iommu: Adding device 7d008000.usb to group 31
-iommu: Adding device 7d008000.usb-phy to group 32
-iommu: Adding device timer to group 33
-iommu: Adding device backlight to group 34
-iommu: Adding device clocks to group 35
-iommu: Adding device gpio-keys to group 36
-iommu: Adding device regulators to group 37
-iommu: Adding device regulators:regulator@0 to group 38
-iommu: Adding device regulators:regulator@1 to group 39
-iommu: Adding device regulators:regulator@3 to group 40
-iommu: Adding device regulators:regulator@4 to group 41
-iommu: Adding device regulators:regulator@5 to group 42
-iommu: Adding device regulators:regulator@6 to group 43
-iommu: Adding device regulators:regulator@7 to group 44
-iommu: Adding device sound to group 45
+iommu: Adding device 54200000.dc to group 0
+iommu: Adding device 54240000.dc to group 0
 AT91: Could not find identification node
 dvdd_ts: Failed to request enable GPIO61: -517
 reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517
@@ -209,7 +165,6 @@
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
 tps65090 2-0048: No cache defaults, reading back from HW
-iommu: Adding device tps65090-pmic to group 46
 TPS65090_RAILSDCDC1: supplied by vdd_ac_bat
 TPS65090_RAILSDCDC2: supplied by vdd_ac_bat
 TPS65090_RAILSDCDC3: supplied by vdd_ac_bat
@@ -222,11 +177,8 @@
 TPS65090_RAILSFET7: supplied by vdd-sys-3v3
 TPS65090_RAILSLDO1: supplied by vdd_ac_bat
 TPS65090_RAILSLDO2: supplied by vdd_ac_bat
-iommu: Adding device tps65090-charger to group 47
 palmas 2-0058: Irq flag is 0x00000004
 palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
-iommu: Adding device 7000d000.i2c:tps65913@58:gpio to group 48
-iommu: Adding device 7000d000.i2c:tps65913@58:pmic to group 49
 SMPS12: supplied by vdd-ao
 vdd_hdmi_5v0: supplied by vdd-sys-5v0
 SMPS3: supplied by vdd-ao
@@ -250,15 +202,13 @@
 LDO9: supplied by sdhci-vdd-sd-slot
 LDOLN: supplied by vdd-sys-5v0
 LDOUSB: supplied by vdd-sys-5v0
-iommu: Adding device 7000d000.i2c:tps65913@58:rtc to group 50
-iommu: Adding device 7000d000.i2c:tps65913@58:pinmux to group 51
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
-dmi: Firmware registration failed.
 clocksource: Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
@@ -270,7 +220,6 @@
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 64
-iommu: Adding device alarmtimer to group 52
 Initialise system trusted keyrings
 workingset: timestamp_bits=30 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
@@ -281,7 +230,7 @@
 Key type asymmetric registered
 Asymmetric key parser 'x509' registered
 bounce: pool size: 64 pages
-Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
 io scheduler noop registered
 io scheduler deadline registered
 io scheduler cfq registered (default)
@@ -290,18 +239,18 @@
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-iommu: Adding device serial8250 to group 53
 console [ttyS0] disabled
 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 329, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
 SuperH (H)SCI(F) driver initialized
 msm_serial: driver initialized
 STMicroelectronics ASC driver initialized
+Failed to attached device 54200000.dc to IOMMU_mapping
+Failed to attached device 54240000.dc to IOMMU_mapping
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 brd: module loaded
 loop: module loaded
 m25p80 spi0.0: w25q32dw (4096 Kbytes)
-iommu: Adding device Fixed MDIO bus.0 to group 54
 libphy: Fixed MDIO Bus: probed
 CAN device driver interface
 bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
@@ -337,7 +286,6 @@
 ohci-st: OHCI STMicroelectronics driver
 ohci-atmel: OHCI Atmel driver
 usbcore: registered new interface driver usb-storage
-iommu: Adding device ci_hdrc.0 to group 55
 palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps65913@58:rtc as rtc0
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
@@ -371,18 +319,18 @@
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
 mmc0: new high speed SDHC card at address aaaa
+mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 usb1_vbus: supplied by vdd-sys-5v0
 usb2_vbus: supplied by vdd-sys-5v0
-mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
  mmcblk0: p1 p2 p3
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
-[drm] No driver support for vblank timestamp query.
 mmc1: new high speed MMC card at address 0001
+[drm] No driver support for vblank timestamp query.
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
-mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB, chardev (237:0)
+mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB, chardev (236:0)
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
 Console: switching to colour frame buffer device 240x75
 drm drm: fb0:  frame buffer device
@@ -394,7 +342,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-21 04:39:25 UTC (961562365)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-07-05 06:42:21 UTC (962779341)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -406,5 +354,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.929252] usb 1-1: new high-speed USB device number 2 using tegra-ehci
-asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:b5:16
+root@(none):/# [    2.579257] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2018-02-11 15:51:31.280459877 -0800
+++ /tmp/foob	2018-02-11 15:51:31.284459894 -0800
@@ -37,21 +37,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###############################
-	 2.8 MiB/s
+	 ##################################
+	 3 MiB/s
 done
-Bytes transferred = 6171744 (5e2c60 hex)
+Bytes transferred = 6216816 (5edc70 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.5 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5e2c60 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5edc70 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-16223-gd8a5b80 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 28 13:33:14 PST 2018
+Linux version 4.16.0-rc1-28877-g7928b2c (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Feb 11 15:34:51 PST 2018
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -74,14 +74,14 @@
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
 random: fast init done
-percpu: Embedded 17 pages/cpu @(ptrval) s39168 r8192 d22272 u69632
-pcpu-alloc: s39168 r8192 d22272 u69632 alloc=17*4096
+percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632
+pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998600K/2096128K available (9216K kernel code, 778K rwdata, 2560K rodata, 1024K init, 299K bss, 31992K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998596K/2096128K available (9216K kernel code, 783K rwdata, 2584K rodata, 1024K init, 298K bss, 31996K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -91,8 +91,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 779 kB)
-       .bss : 0x(ptrval) - 0x(ptrval)   ( 300 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 784 kB)
+       .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -138,52 +138,8 @@
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 8 bytes.
 tegra-mc 70019000.memory-controller: no memory timings for RAM code 3 registered
-iommu: Adding device reg-dummy to group 0
-iommu: Adding device 50000000.host1x to group 1
-iommu: Adding device 54140000.gr2d to group 2
-iommu: Adding device 54180000.gr3d to group 3
-iommu: Adding device 54200000.dc to group 4
-iommu: Adding device 54240000.dc to group 5
-iommu: Adding device 54280000.hdmi to group 6
-iommu: Adding device 54300000.dsi to group 7
-iommu: Adding device 60005000.timer to group 8
-iommu: Adding device 60007000.flow-controller to group 9
-iommu: Adding device 6000a000.dma to group 10
-iommu: Adding device 6000c000.ahb to group 11
-iommu: Adding device 6000d000.gpio to group 12
-iommu: Adding device 70000800.apbmisc to group 13
-iommu: Adding device 70000868.pinmux to group 14
-iommu: Adding device 70006300.serial to group 15
-iommu: Adding device 7000a000.pwm to group 16
-iommu: Adding device 7000c000.i2c to group 17
-iommu: Adding device 7000c700.i2c to group 18
-iommu: Adding device 7000d000.i2c to group 19
-iommu: Adding device 7000da00.spi to group 20
-iommu: Adding device 7000e000.rtc to group 21
-iommu: Adding device 7000e400.pmc to group 22
-iommu: Adding device 7000f800.fuse to group 23
-iommu: Adding device 70019000.memory-controller to group 24
-iommu: Adding device 70080000.ahub to group 25
-iommu: Adding device 700e3000.mipi to group 26
-iommu: Adding device 78000400.sdhci to group 27
-iommu: Adding device 78000600.sdhci to group 28
-iommu: Adding device 7d000000.usb to group 29
-iommu: Adding device 7d000000.usb-phy to group 30
-iommu: Adding device 7d008000.usb to group 31
-iommu: Adding device 7d008000.usb-phy to group 32
-iommu: Adding device timer to group 33
-iommu: Adding device backlight to group 34
-iommu: Adding device clocks to group 35
-iommu: Adding device gpio-keys to group 36
-iommu: Adding device regulators to group 37
-iommu: Adding device regulators:regulator@0 to group 38
-iommu: Adding device regulators:regulator@1 to group 39
-iommu: Adding device regulators:regulator@3 to group 40
-iommu: Adding device regulators:regulator@4 to group 41
-iommu: Adding device regulators:regulator@5 to group 42
-iommu: Adding device regulators:regulator@6 to group 43
-iommu: Adding device regulators:regulator@7 to group 44
-iommu: Adding device sound to group 45
+iommu: Adding device 54200000.dc to group 0
+iommu: Adding device 54240000.dc to group 0
 dvdd_ts: Failed to request enable GPIO61: -517
 reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517
 usb1_vbus: Failed to request enable GPIO108: -517
@@ -199,7 +155,6 @@
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
 tps65090 2-0048: No cache defaults, reading back from HW
-iommu: Adding device tps65090-pmic to group 46
 TPS65090_RAILSDCDC1: supplied by vdd_ac_bat
 TPS65090_RAILSDCDC2: supplied by vdd_ac_bat
 TPS65090_RAILSDCDC3: supplied by vdd_ac_bat
@@ -212,11 +167,8 @@
 TPS65090_RAILSFET7: supplied by vdd-sys-3v3
 TPS65090_RAILSLDO1: supplied by vdd_ac_bat
 TPS65090_RAILSLDO2: supplied by vdd_ac_bat
-iommu: Adding device tps65090-charger to group 47
 palmas 2-0058: Irq flag is 0x00000004
 palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
-iommu: Adding device 7000d000.i2c:tps65913@58:gpio to group 48
-iommu: Adding device 7000d000.i2c:tps65913@58:pmic to group 49
 SMPS12: supplied by vdd-ao
 vdd_hdmi_5v0: supplied by vdd-sys-5v0
 SMPS3: supplied by vdd-ao
@@ -240,8 +192,6 @@
 LDO9: supplied by sdhci-vdd-sd-slot
 LDOLN: supplied by vdd-sys-5v0
 LDOUSB: supplied by vdd-sys-5v0
-iommu: Adding device 7000d000.i2c:tps65913@58:rtc to group 50
-iommu: Adding device 7000d000.i2c:tps65913@58:pinmux to group 51
 Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
@@ -255,6 +205,7 @@
 Bluetooth: SCO socket layer initialized
 clocksource: Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
@@ -265,9 +216,7 @@
 RPC: Registered udp transport module.
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
-iommu: Adding device regulatory.0 to group 52
 PCI: CLS 0 bytes, default 64
-iommu: Adding device alarmtimer to group 53
 Initialise system trusted keyrings
 workingset: timestamp_bits=30 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
@@ -283,7 +232,6 @@
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-iommu: Adding device serial8250 to group 54
 console [ttyS0] disabled
 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 329, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
@@ -293,7 +241,6 @@
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 loop: module loaded
 m25p80 spi0.0: w25q32dw (4096 Kbytes)
-iommu: Adding device Fixed MDIO bus.0 to group 55
 libphy: Fixed MDIO Bus: probed
 CAN device driver interface
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
@@ -317,7 +264,6 @@
 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 usbcore: registered new interface driver cdc_wdm
 usbcore: registered new interface driver usb-storage
-iommu: Adding device ci_hdrc.0 to group 56
 palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps65913@58:rtc as rtc0
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
@@ -339,17 +285,15 @@
 mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-iommu: Adding device snd-soc-dummy to group 57
-mmc0: new high speed SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
- mmcblk0: p1 p2 p3
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
+mmc0: new high speed SDHC card at address aaaa
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
+mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB, chardev (247:0)
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
-iommu: Adding device 70080400.i2s to group 58
+ mmcblk0: p1 p2 p3
 tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
 tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
 input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound/sound/card0/input0
@@ -388,7 +332,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-21 04:36:45 UTC (961562205)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-07-05 06:39:38 UTC (962779178)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
@@ -401,9 +345,10 @@
 EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk1p1): recovery complete
 EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:17.
+VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.171077] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.809463] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:b5:16
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-02-11 15:51:31.308460005 -0800
+++ /tmp/foob	2018-02-11 15:51:31.308460005 -0800
@@ -34,21 +34,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##############################
+	 ####################################
 	 3.9 MiB/s
 done
-Bytes transferred = 8065536 (7b1200 hex)
+Bytes transferred = 8159744 (7c8200 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 3.5 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x7b1200 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7c8200 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-336172-gd8a5b80568a9 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 28 13:34:20 PST 2018
+Linux version 4.16.0-rc1-348826-g7928b2cbe55b (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Feb 11 15:35:47 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -72,14 +72,14 @@
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
 random: fast init done
-percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632
-pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096
+percpu: Embedded 17 pages/cpu @(ptrval) s39232 r8192 d22208 u69632
+pcpu-alloc: s39232 r8192 d22208 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992440K/2096128K available (11264K kernel code, 1602K rwdata, 4296K rodata, 2048K init, 404K bss, 38152K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992472K/2096128K available (11264K kernel code, 1570K rwdata, 4348K rodata, 2048K init, 405K bss, 38120K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -89,8 +89,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   (1603 kB)
-       .bss : 0x(ptrval) - 0x(ptrval)   ( 405 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   (1571 kB)
+       .bss : 0x(ptrval) - 0x(ptrval)   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -141,69 +141,10 @@
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 8 bytes.
 Serial: AMBA PL011 UART driver
-iommu: Adding device reg-dummy to group 0
-iommu: Adding device 1003000.pcie to group 1
-iommu: Adding device 50000000.host1x to group 2
-iommu: Adding device 54200000.dc to group 3
-iommu: Adding device 54240000.dc to group 4
-iommu: Adding device 54280000.hdmi to group 5
-iommu: Adding device 57000000.gpu to group 6
-iommu: Adding device 60005000.timer to group 7
-iommu: Adding device 60007000.flow-controller to group 8
-iommu: Adding device 6000c800.actmon to group 9
-iommu: Adding device 6000d000.gpio to group 10
-iommu: Adding device 60020000.dma to group 11
-iommu: Adding device 70000800.apbmisc to group 12
-iommu: Adding device 70000868.pinmux to group 13
-iommu: Adding device 70006000.serial to group 14
-iommu: Adding device 70006040.serial to group 15
-iommu: Adding device 70006300.serial to group 16
-iommu: Adding device 7000c000.i2c to group 17
-iommu: Adding device 7000c400.i2c to group 18
-iommu: Adding device 7000c500.i2c to group 19
-iommu: Adding device 7000c700.i2c to group 20
-iommu: Adding device 7000d000.i2c to group 21
-iommu: Adding device 7000d400.spi to group 22
-iommu: Adding device 7000da00.spi to group 23
-iommu: Adding device 7000e000.rtc to group 24
-iommu: Adding device 7000e400.pmc to group 25
-iommu: Adding device 7000f800.fuse to group 26
-iommu: Adding device 70019000.memory-controller to group 27
-iommu: Adding device 7001b000.emc to group 28
-iommu: Adding device 70027000.sata to group 29
-iommu: Adding device 70030000.hda to group 30
-iommu: Adding device 70090000.usb to group 31
-iommu: Adding device 7009f000.padctl to group 32
-iommu: Adding device 700b0400.sdhci to group 33
-iommu: Adding device 700b0600.sdhci to group 34
-iommu: Adding device 70015000.cec to group 35
-iommu: Adding device 700e2000.thermal-sensor to group 36
-iommu: Adding device 70110000.clock to group 37
-iommu: Adding device 70300000.ahub to group 38
-iommu: Adding device 7d000000.usb to group 39
-iommu: Adding device 7d000000.usb-phy to group 40
-iommu: Adding device 7d004000.usb to group 41
-iommu: Adding device 7d004000.usb-phy to group 42
-iommu: Adding device 7d008000.usb to group 43
-iommu: Adding device 7d008000.usb-phy to group 44
-iommu: Adding device pmu to group 45
-iommu: Adding device timer to group 46
-iommu: Adding device clocks to group 47
-iommu: Adding device gpio-keys to group 48
-iommu: Adding device regulators to group 49
-iommu: Adding device regulators:regulator@0 to group 50
-iommu: Adding device regulators:regulator@1 to group 51
-iommu: Adding device regulators:regulator@2 to group 52
-iommu: Adding device regulators:regulator@3 to group 53
-iommu: Adding device regulators:regulator@4 to group 54
-iommu: Adding device regulators:regulator@7 to group 55
-iommu: Adding device regulators:regulator@8 to group 56
-iommu: Adding device regulators:regulator@10 to group 57
-iommu: Adding device regulators:regulator@11 to group 58
-iommu: Adding device regulators:regulator@12 to group 59
-iommu: Adding device regulators:regulator@13 to group 60
-iommu: Adding device regulators:regulator@14 to group 61
-iommu: Adding device sound to group 62
+iommu: Adding device 50000000.host1x to group 0
+iommu: Adding device 54200000.dc to group 1
+iommu: Adding device 54240000.dc to group 1
+iommu: Adding device 57000000.gpu to group 2
 AT91: Could not find identification node
 +5V_SYS: supplied by +VDD_MUX
 +3.3V_SYS: supplied by +VDD_MUX
@@ -229,9 +170,9 @@
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
-dmi: Firmware registration failed.
 clocksource: Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
@@ -244,7 +185,6 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 64
 hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
-iommu: Adding device alarmtimer to group 63
 Initialise system trusted keyrings
 workingset: timestamp_bits=30 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
@@ -255,7 +195,7 @@
 Key type asymmetric registered
 Asymmetric key parser 'x509' registered
 bounce: pool size: 64 pages
-Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
 io scheduler noop registered
 io scheduler deadline registered
 io scheduler cfq registered (default)
@@ -270,7 +210,6 @@
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: emergency thermal reset enabled
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-iommu: Adding device serial8250 to group 64
 console [ttyS0] disabled
 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
@@ -279,13 +218,13 @@
 STMicroelectronics ASC driver initialized
 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART
 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART
+Failed to attached device 54200000.dc to IOMMU_mapping
+Failed to attached device 54240000.dc to IOMMU_mapping
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 brd: module loaded
 loop: module loaded
 at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
 as3722 4-0040: AS3722 with revision 0x1 found
-iommu: Adding device as3722-pinctrl to group 65
-iommu: Adding device as3722-regulator to group 66
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
@@ -303,13 +242,8 @@
 +VDDIO_SDMMC3: bypassed regulator has no supply!
 +VDDIO_SDMMC3: failed to get the current voltage(-517)
 as3722-regulator as3722-regulator: regulator 13 register failed -517
-iommu: Adding device as3722-rtc to group 67
-iommu: Adding device as3722-adc to group 68
-iommu: Adding device as3722-power-off to group 69
-iommu: Adding device as3722-wdt to group 70
 tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
 m25p80 spi1.0: w25q32dw (4096 Kbytes)
-iommu: Adding device Fixed MDIO bus.0 to group 71
 libphy: Fixed MDIO Bus: probed
 CAN device driver interface
 bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
@@ -352,14 +286,12 @@
 ohci-st: OHCI STMicroelectronics driver
 ohci-atmel: OHCI Atmel driver
 usbcore: registered new interface driver usb-storage
-iommu: Adding device ci_hdrc.0 to group 72
 as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
 as3722-rtc as3722-rtc: RTC interrupt 379
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 i2c /dev entries driver
 lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
-iommu: Adding device cpufreq-tegra124 to group 73
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 Synopsys Designware Multimedia Card Interface Driver
@@ -393,7 +325,6 @@
 +5V_HDMI_CON: supplied by +5V_SYS
 +5V_SATA: supplied by +5V_SYS
 +12V_SATA: supplied by +VDD_MUX
-mmc0: new high speed MMC card at address 0001
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
  usb2-1: usb2-1 supply vbus not found, using dummy regulator
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
@@ -420,9 +351,15 @@
 +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
 as3722-ldo11: supplied by +3.3V_RUN
 +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (236:0)
 tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
 tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
 scsi host0: tegra-ahci
+ mmcblk0: p1
 scsi host1: tegra-ahci
 ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345
 ata2: DUMMY
@@ -460,6 +397,7 @@
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
 pci 0000:00:02.0: enabling Extended Tags
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits
+ata1: SATA link down (SStatus 0 SControl 300)
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits
 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits
@@ -468,12 +406,18 @@
 pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
 pci 0000:01:00.0: [8086:4232] type 00 class 0x028000
 pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
+pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 PCI: bus1: Fast back to back transfers disabled
 pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
 pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
 pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
 pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:02:00.0: supports D1 D2
+pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+ mmcblk1: p1 p2 p3
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
@@ -498,19 +442,19 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x96892fb0, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x0350b9a0, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
-[drm] Cannot find any crtc or sizes
+tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
+Console: switching to colour frame buffer device 512x135
+drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-iommu: Adding device cpufreq-dt.0 to group 74
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:42 UTC (946685082)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:19 UTC (946685059)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
@@ -519,24 +463,12 @@
 +3.3V_RUN_TOUCH: disabling
 +2.8V_RUN_CAM_AF: disabling
 +1.8V_RUN_VPP_FUSE: disabling
-tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
-mmc1: new high speed SDHC card at address aaaa
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
-ata1: SATA link down (SStatus 0 SControl 300)
- mmcblk1: p1 p2 p3
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (237:0)
- mmcblk0: p1
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-Console: switching to colour frame buffer device 512x135
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:17.
+VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
 Freeing unused kernel memory: 2048K
-drm drm: fb0:  frame buffer device
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2018-02-11 15:51:31.316460043 -0800
+++ /tmp/foob	2018-02-11 15:51:31.320460062 -0800
@@ -32,21 +32,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###############################
-	 3.9 MiB/s
+	 ##################################
+	 4 MiB/s
 done
-Bytes transferred = 6171744 (5e2c60 hex)
+Bytes transferred = 6216816 (5edc70 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 4 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5e2c60 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5edc70 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-16223-gd8a5b80 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 28 13:33:14 PST 2018
+Linux version 4.16.0-rc1-28877-g7928b2c (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Feb 11 15:34:51 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -69,14 +69,14 @@
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
 random: fast init done
-percpu: Embedded 17 pages/cpu @(ptrval) s39168 r8192 d22272 u69632
-pcpu-alloc: s39168 r8192 d22272 u69632 alloc=17*4096
+percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632
+pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998492K/2096128K available (9216K kernel code, 778K rwdata, 2560K rodata, 1024K init, 299K bss, 32100K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998488K/2096128K available (9216K kernel code, 783K rwdata, 2584K rodata, 1024K init, 298K bss, 32104K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -86,8 +86,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 779 kB)
-       .bss : 0x(ptrval) - 0x(ptrval)   ( 300 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 784 kB)
+       .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -132,69 +132,10 @@
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 8 bytes.
-iommu: Adding device reg-dummy to group 0
-iommu: Adding device 1003000.pcie to group 1
-iommu: Adding device 50000000.host1x to group 2
-iommu: Adding device 54200000.dc to group 3
-iommu: Adding device 54240000.dc to group 4
-iommu: Adding device 54280000.hdmi to group 5
-iommu: Adding device 57000000.gpu to group 6
-iommu: Adding device 60005000.timer to group 7
-iommu: Adding device 60007000.flow-controller to group 8
-iommu: Adding device 6000c800.actmon to group 9
-iommu: Adding device 6000d000.gpio to group 10
-iommu: Adding device 60020000.dma to group 11
-iommu: Adding device 70000800.apbmisc to group 12
-iommu: Adding device 70000868.pinmux to group 13
-iommu: Adding device 70006000.serial to group 14
-iommu: Adding device 70006040.serial to group 15
-iommu: Adding device 70006300.serial to group 16
-iommu: Adding device 7000c000.i2c to group 17
-iommu: Adding device 7000c400.i2c to group 18
-iommu: Adding device 7000c500.i2c to group 19
-iommu: Adding device 7000c700.i2c to group 20
-iommu: Adding device 7000d000.i2c to group 21
-iommu: Adding device 7000d400.spi to group 22
-iommu: Adding device 7000da00.spi to group 23
-iommu: Adding device 7000e000.rtc to group 24
-iommu: Adding device 7000e400.pmc to group 25
-iommu: Adding device 7000f800.fuse to group 26
-iommu: Adding device 70019000.memory-controller to group 27
-iommu: Adding device 7001b000.emc to group 28
-iommu: Adding device 70027000.sata to group 29
-iommu: Adding device 70030000.hda to group 30
-iommu: Adding device 70090000.usb to group 31
-iommu: Adding device 7009f000.padctl to group 32
-iommu: Adding device 700b0400.sdhci to group 33
-iommu: Adding device 700b0600.sdhci to group 34
-iommu: Adding device 70015000.cec to group 35
-iommu: Adding device 700e2000.thermal-sensor to group 36
-iommu: Adding device 70110000.clock to group 37
-iommu: Adding device 70300000.ahub to group 38
-iommu: Adding device 7d000000.usb to group 39
-iommu: Adding device 7d000000.usb-phy to group 40
-iommu: Adding device 7d004000.usb to group 41
-iommu: Adding device 7d004000.usb-phy to group 42
-iommu: Adding device 7d008000.usb to group 43
-iommu: Adding device 7d008000.usb-phy to group 44
-iommu: Adding device pmu to group 45
-iommu: Adding device timer to group 46
-iommu: Adding device clocks to group 47
-iommu: Adding device gpio-keys to group 48
-iommu: Adding device regulators to group 49
-iommu: Adding device regulators:regulator@0 to group 50
-iommu: Adding device regulators:regulator@1 to group 51
-iommu: Adding device regulators:regulator@2 to group 52
-iommu: Adding device regulators:regulator@3 to group 53
-iommu: Adding device regulators:regulator@4 to group 54
-iommu: Adding device regulators:regulator@7 to group 55
-iommu: Adding device regulators:regulator@8 to group 56
-iommu: Adding device regulators:regulator@10 to group 57
-iommu: Adding device regulators:regulator@11 to group 58
-iommu: Adding device regulators:regulator@12 to group 59
-iommu: Adding device regulators:regulator@13 to group 60
-iommu: Adding device regulators:regulator@14 to group 61
-iommu: Adding device sound to group 62
+iommu: Adding device 50000000.host1x to group 0
+iommu: Adding device 54200000.dc to group 1
+iommu: Adding device 54240000.dc to group 1
+iommu: Adding device 57000000.gpu to group 2
 +5V_SYS: supplied by +VDD_MUX
 +3.3V_SYS: supplied by +VDD_MUX
 +USB0_VBUS_SW: Failed to request enable GPIO108: -517
@@ -228,6 +169,7 @@
 Bluetooth: SCO socket layer initialized
 clocksource: Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
@@ -238,10 +180,8 @@
 RPC: Registered udp transport module.
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
-iommu: Adding device regulatory.0 to group 63
 PCI: CLS 0 bytes, default 64
 hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
-iommu: Adding device alarmtimer to group 64
 Initialise system trusted keyrings
 workingset: timestamp_bits=30 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
@@ -263,7 +203,6 @@
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: emergency thermal reset enabled
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-iommu: Adding device serial8250 to group 65
 console [ttyS0] disabled
 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
@@ -276,8 +215,6 @@
 loop: module loaded
 at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
 as3722 4-0040: AS3722 with revision 0x1 found
-iommu: Adding device as3722-pinctrl to group 66
-iommu: Adding device as3722-regulator to group 67
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
@@ -295,13 +232,8 @@
 +VDDIO_SDMMC3: bypassed regulator has no supply!
 +VDDIO_SDMMC3: failed to get the current voltage(-517)
 as3722-regulator as3722-regulator: regulator 13 register failed -517
-iommu: Adding device as3722-rtc to group 68
-iommu: Adding device as3722-adc to group 69
-iommu: Adding device as3722-power-off to group 70
-iommu: Adding device as3722-wdt to group 71
 tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
 m25p80 spi1.0: w25q32dw (4096 Kbytes)
-iommu: Adding device Fixed MDIO bus.0 to group 72
 libphy: Fixed MDIO Bus: probed
 CAN device driver interface
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
@@ -332,7 +264,6 @@
 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 usbcore: registered new interface driver cdc_wdm
 usbcore: registered new interface driver usb-storage
-iommu: Adding device ci_hdrc.0 to group 73
 as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
 as3722-rtc as3722-rtc: RTC interrupt 379
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
@@ -343,7 +274,6 @@
 gspca_main: v2.14.0 registered
 lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
 tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0)
-iommu: Adding device cpufreq-tegra124 to group 74
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
@@ -354,14 +284,12 @@
 mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-iommu: Adding device snd-soc-dummy to group 75
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (247:0)
  mmcblk0: p1
-iommu: Adding device 70301100.i2s to group 76
 tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
 tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok
 input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card1/input0
@@ -410,11 +338,11 @@
 as3722-ldo3: supplied by +3.3V_SYS
 as3722-ldo4: supplied by +3.3V_SYS
 as3722-ldo5: supplied by +1.8V_VDDIO
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 as3722-ldo6: supplied by +3.3V_RUN
 as3722-ldo7: supplied by +1.8V_VDDIO
 +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
 as3722-ldo9: supplied by +5V_SYS
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
 as3722-ldo10: supplied by +5V_SYS
 +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
@@ -455,11 +383,11 @@
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
 pci 0000:00:01.0: enabling Extended Tags
-ata1: SATA link down (SStatus 0 SControl 300)
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
 pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
+ata1: SATA link down (SStatus 0 SControl 300)
 pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
@@ -473,14 +401,18 @@
 pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
 pci 0000:01:00.0: [8086:4232] type 00 class 0x028000
 pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
+pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 PCI: bus1: Fast back to back transfers disabled
 pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
 pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
 pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
 pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
-mmc1: new high speed SDHC card at address aaaa
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:02:00.0: supports D1 D2
+pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+ mmcblk1: p1 p2 p3
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
@@ -498,7 +430,6 @@
 pci 0000:00:02.0:   bridge window [mem 0x13100000-0x131fffff]
 pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
 pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
- mmcblk1: p1 p2 p3
 pcieport 0000:00:01.0: enabling device (0140 -> 0142)
 pcieport 0000:00:01.0: Signaling PME with IRQ 395
 pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
@@ -506,8 +437,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x3c3eaba5, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x11e7a3fe, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -516,14 +446,14 @@
 Console: switching to colour frame buffer device 512x135
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-iommu: Adding device cpufreq-dt.0 to group 77
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:14 UTC (946684814)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:13 UTC (946684813)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
+cfg80211: failed to load regulatory.db
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
@@ -535,7 +465,6 @@
 ALSA device list:
   #0: tegra-hda at 0x70038000 irq 346
   #1: NVIDIA Tegra Jetson TK1
-cfg80211: failed to load regulatory.db
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2018-02-11 15:51:31.328460098 -0800
+++ /tmp/foob	2018-02-11 15:51:31.332460116 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -32,10 +32,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##########################################
-	 3.4 MiB/s
+	 #############################################
+	 4 MiB/s
 done
-Bytes transferred = 6337104 (60b250 hex)
+Bytes transferred = 6383728 (616870 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -46,7 +46,7 @@
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x60b250 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x616870 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-217931-gd8a5b80 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 28 13:34:57 PST 2018
+Linux version 4.16.0-rc1-230585-g7928b2c (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Feb 11 15:35:30 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -69,14 +69,14 @@
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
 random: fast init done
-percpu: Embedded 17 pages/cpu @(ptrval) s39168 r8192 d22272 u69632
-pcpu-alloc: s39168 r8192 d22272 u69632 alloc=17*4096
+percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632
+pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1997468K/2096128K available (9216K kernel code, 778K rwdata, 2820K rodata, 1024K init, 299K bss, 33124K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1997464K/2096128K available (9216K kernel code, 783K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -86,8 +86,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 779 kB)
-       .bss : 0x(ptrval) - 0x(ptrval)   ( 300 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 784 kB)
+       .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -132,69 +132,10 @@
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 8 bytes.
-iommu: Adding device reg-dummy to group 0
-iommu: Adding device 1003000.pcie to group 1
-iommu: Adding device 50000000.host1x to group 2
-iommu: Adding device 54200000.dc to group 3
-iommu: Adding device 54240000.dc to group 4
-iommu: Adding device 54280000.hdmi to group 5
-iommu: Adding device 57000000.gpu to group 6
-iommu: Adding device 60005000.timer to group 7
-iommu: Adding device 60007000.flow-controller to group 8
-iommu: Adding device 6000c800.actmon to group 9
-iommu: Adding device 6000d000.gpio to group 10
-iommu: Adding device 60020000.dma to group 11
-iommu: Adding device 70000800.apbmisc to group 12
-iommu: Adding device 70000868.pinmux to group 13
-iommu: Adding device 70006000.serial to group 14
-iommu: Adding device 70006040.serial to group 15
-iommu: Adding device 70006300.serial to group 16
-iommu: Adding device 7000c000.i2c to group 17
-iommu: Adding device 7000c400.i2c to group 18
-iommu: Adding device 7000c500.i2c to group 19
-iommu: Adding device 7000c700.i2c to group 20
-iommu: Adding device 7000d000.i2c to group 21
-iommu: Adding device 7000d400.spi to group 22
-iommu: Adding device 7000da00.spi to group 23
-iommu: Adding device 7000e000.rtc to group 24
-iommu: Adding device 7000e400.pmc to group 25
-iommu: Adding device 7000f800.fuse to group 26
-iommu: Adding device 70019000.memory-controller to group 27
-iommu: Adding device 7001b000.emc to group 28
-iommu: Adding device 70027000.sata to group 29
-iommu: Adding device 70030000.hda to group 30
-iommu: Adding device 70090000.usb to group 31
-iommu: Adding device 7009f000.padctl to group 32
-iommu: Adding device 700b0400.sdhci to group 33
-iommu: Adding device 700b0600.sdhci to group 34
-iommu: Adding device 70015000.cec to group 35
-iommu: Adding device 700e2000.thermal-sensor to group 36
-iommu: Adding device 70110000.clock to group 37
-iommu: Adding device 70300000.ahub to group 38
-iommu: Adding device 7d000000.usb to group 39
-iommu: Adding device 7d000000.usb-phy to group 40
-iommu: Adding device 7d004000.usb to group 41
-iommu: Adding device 7d004000.usb-phy to group 42
-iommu: Adding device 7d008000.usb to group 43
-iommu: Adding device 7d008000.usb-phy to group 44
-iommu: Adding device pmu to group 45
-iommu: Adding device timer to group 46
-iommu: Adding device clocks to group 47
-iommu: Adding device gpio-keys to group 48
-iommu: Adding device regulators to group 49
-iommu: Adding device regulators:regulator@0 to group 50
-iommu: Adding device regulators:regulator@1 to group 51
-iommu: Adding device regulators:regulator@2 to group 52
-iommu: Adding device regulators:regulator@3 to group 53
-iommu: Adding device regulators:regulator@4 to group 54
-iommu: Adding device regulators:regulator@7 to group 55
-iommu: Adding device regulators:regulator@8 to group 56
-iommu: Adding device regulators:regulator@10 to group 57
-iommu: Adding device regulators:regulator@11 to group 58
-iommu: Adding device regulators:regulator@12 to group 59
-iommu: Adding device regulators:regulator@13 to group 60
-iommu: Adding device regulators:regulator@14 to group 61
-iommu: Adding device sound to group 62
+iommu: Adding device 50000000.host1x to group 0
+iommu: Adding device 54200000.dc to group 1
+iommu: Adding device 54240000.dc to group 1
+iommu: Adding device 57000000.gpu to group 2
 +5V_SYS: supplied by +VDD_MUX
 +3.3V_SYS: supplied by +VDD_MUX
 +USB0_VBUS_SW: Failed to request enable GPIO108: -517
@@ -228,6 +169,7 @@
 Bluetooth: SCO socket layer initialized
 clocksource: Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
@@ -238,10 +180,8 @@
 RPC: Registered udp transport module.
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
-iommu: Adding device regulatory.0 to group 63
 PCI: CLS 0 bytes, default 64
 hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
-iommu: Adding device alarmtimer to group 64
 Initialise system trusted keyrings
 workingset: timestamp_bits=30 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
@@ -263,7 +203,6 @@
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: emergency thermal reset enabled
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-iommu: Adding device serial8250 to group 65
 console [ttyS0] disabled
 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
@@ -276,8 +215,6 @@
 loop: module loaded
 at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
 as3722 4-0040: AS3722 with revision 0x1 found
-iommu: Adding device as3722-pinctrl to group 66
-iommu: Adding device as3722-regulator to group 67
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
@@ -295,13 +232,8 @@
 +VDDIO_SDMMC3: bypassed regulator has no supply!
 +VDDIO_SDMMC3: failed to get the current voltage(-517)
 as3722-regulator as3722-regulator: regulator 13 register failed -517
-iommu: Adding device as3722-rtc to group 68
-iommu: Adding device as3722-adc to group 69
-iommu: Adding device as3722-power-off to group 70
-iommu: Adding device as3722-wdt to group 71
 tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517
 m25p80 spi1.0: w25q32dw (4096 Kbytes)
-iommu: Adding device Fixed MDIO bus.0 to group 72
 libphy: Fixed MDIO Bus: probed
 CAN device driver interface
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
@@ -332,7 +264,6 @@
 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 usbcore: registered new interface driver cdc_wdm
 usbcore: registered new interface driver usb-storage
-iommu: Adding device ci_hdrc.0 to group 73
 as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
 as3722-rtc as3722-rtc: RTC interrupt 379
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
@@ -343,7 +274,6 @@
 gspca_main: v2.14.0 registered
 lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
 tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0)
-iommu: Adding device cpufreq-tegra124 to group 74
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
@@ -354,14 +284,12 @@
 mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-iommu: Adding device snd-soc-dummy to group 75
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (247:0)
  mmcblk0: p1
-iommu: Adding device 70301100.i2s to group 76
 tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
 tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok
 input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card1/input0
@@ -410,11 +338,11 @@
 as3722-ldo3: supplied by +3.3V_SYS
 as3722-ldo4: supplied by +3.3V_SYS
 as3722-ldo5: supplied by +1.8V_VDDIO
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 as3722-ldo6: supplied by +3.3V_RUN
 as3722-ldo7: supplied by +1.8V_VDDIO
 +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV
 as3722-ldo9: supplied by +5V_SYS
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV
 as3722-ldo10: supplied by +5V_SYS
 +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
@@ -450,10 +378,10 @@
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
-ata1: SATA link down (SStatus 0 SControl 300)
 tegra-pcie 1003000.pcie: probing port 0, using 2 lanes
 tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008
 tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
+ata1: SATA link down (SStatus 0 SControl 300)
 tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000
 tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
@@ -481,14 +409,18 @@
 pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
 pci 0000:01:00.0: [8086:4232] type 00 class 0x028000
 pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
+pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 PCI: bus1: Fast back to back transfers disabled
 pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
 pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
 pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
 pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
-mmc1: new high speed SDHC card at address aaaa
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:02:00.0: supports D1 D2
+pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+ mmcblk1: p1 p2 p3
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
@@ -506,7 +438,6 @@
 pci 0000:00:02.0:   bridge window [mem 0x13100000-0x131fffff]
 pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
 pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
- mmcblk1: p1 p2 p3
 pcieport 0000:00:01.0: enabling device (0140 -> 0142)
 pcieport 0000:00:01.0: Signaling PME with IRQ 395
 pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
@@ -514,8 +445,7 @@
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
-r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x9f08c0cf, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xc81bec2b, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 397
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -524,17 +454,16 @@
 Console: switching to colour frame buffer device 512x135
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-iommu: Adding device cpufreq-dt.0 to group 77
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:34 UTC (946684954)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:08 UTC (946684928)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
-cfg80211: failed to load regulatory.db
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
+cfg80211: failed to load regulatory.db
 +2.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-02-11 15:51:31.356460228 -0800
+++ /tmp/foob	2018-02-11 15:51:31.356460228 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -42,21 +42,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##############################
-	 3.3 MiB/s
+	 ####################################
+	 3.5 MiB/s
 done
-Bytes transferred = 8065536 (7b1200 hex)
+Bytes transferred = 8159744 (7c8200 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.2 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x7b1200 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x7c8200 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-336172-gd8a5b80568a9 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 28 13:34:20 PST 2018
+Linux version 4.16.0-rc1-348826-g7928b2cbe55b (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Feb 11 15:35:47 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -81,14 +81,14 @@
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327679 pages, LIFO batch:31
 random: fast init done
-percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632
-pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096
+percpu: Embedded 17 pages/cpu @(ptrval) s39232 r8192 d22208 u69632
+pcpu-alloc: s39232 r8192 d22208 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists, mobility grouping on.  Total pages: 522751
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1993456K/2097148K available (11264K kernel code, 1602K rwdata, 4296K rodata, 2048K init, 404K bss, 38156K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1993488K/2097148K available (11264K kernel code, 1570K rwdata, 4348K rodata, 2048K init, 405K bss, 38124K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -98,8 +98,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   (1603 kB)
-       .bss : 0x(ptrval) - 0x(ptrval)   ( 405 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   (1571 kB)
+       .bss : 0x(ptrval) - 0x(ptrval)   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -151,66 +151,10 @@
 hw-breakpoint: maximum watchpoint size is 8 bytes.
 Serial: AMBA PL011 UART driver
 tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered
-iommu: Adding device reg-dummy to group 0
-iommu: Adding device 50000000.host1x to group 1
-iommu: Adding device 54200000.dc to group 2
-iommu: Adding device 54240000.dc to group 3
-iommu: Adding device 54280000.hdmi to group 4
-iommu: Adding device 54540000.sor to group 5
-iommu: Adding device 545c0000.dpaux to group 6
-iommu: Adding device 57000000.gpu to group 7
-iommu: Adding device 60005000.timer to group 8
-iommu: Adding device 60007000.flow-controller to group 9
-iommu: Adding device 6000c800.actmon to group 10
-iommu: Adding device 6000d000.gpio to group 11
-iommu: Adding device 60020000.dma to group 12
-iommu: Adding device 70000800.apbmisc to group 13
-iommu: Adding device 70000868.pinmux to group 14
-iommu: Adding device 70006000.serial to group 15
-iommu: Adding device 7000a000.pwm to group 16
-iommu: Adding device 7000c000.i2c to group 17
-iommu: Adding device 7000c400.i2c to group 18
-iommu: Adding device 7000c500.i2c to group 19
-iommu: Adding device 7000c700.i2c to group 20
-iommu: Adding device 7000d000.i2c to group 21
-iommu: Adding device 7000d400.spi to group 22
-iommu: Adding device 7000da00.spi to group 23
-iommu: Adding device 7000e000.rtc to group 24
-iommu: Adding device 7000e400.pmc to group 25
-iommu: Adding device 7000f800.fuse to group 26
-iommu: Adding device 70019000.memory-controller to group 27
-iommu: Adding device 7001b000.emc to group 28
-iommu: Adding device 70030000.hda to group 29
-iommu: Adding device 70090000.usb to group 30
-iommu: Adding device 7009f000.padctl to group 31
-iommu: Adding device 700b0000.sdhci to group 32
-iommu: Adding device 700b0400.sdhci to group 33
-iommu: Adding device 700b0600.sdhci to group 34
-iommu: Adding device 700e2000.thermal-sensor to group 35
-iommu: Adding device 70300000.ahub to group 36
-iommu: Adding device pmu to group 37
-iommu: Adding device timer to group 38
-iommu: Adding device sdhci0_pwrseq to group 39
-iommu: Adding device backlight to group 40
-iommu: Adding device clocks to group 41
-iommu: Adding device gpio-keys to group 42
-iommu: Adding device regulators to group 43
-iommu: Adding device regulators:regulator@0 to group 44
-iommu: Adding device regulators:regulator@1 to group 45
-iommu: Adding device regulators:regulator@2 to group 46
-iommu: Adding device regulators:regulator@3 to group 47
-iommu: Adding device regulators:regulator@4 to group 48
-iommu: Adding device regulators:regulator@5 to group 49
-iommu: Adding device regulators:regulator@6 to group 50
-iommu: Adding device regulators:regulator@7 to group 51
-iommu: Adding device regulators:regulator@8 to group 52
-iommu: Adding device regulators:regulator@9 to group 53
-iommu: Adding device regulators:regulator@10 to group 54
-iommu: Adding device regulators:regulator@11 to group 55
-iommu: Adding device regulators:regulator@12 to group 56
-iommu: Adding device sound to group 57
-iommu: Adding device gpio-restart to group 58
-iommu: Adding device panel to group 59
+iommu: Adding device 50000000.host1x to group 0
+iommu: Adding device 54200000.dc to group 1
+iommu: Adding device 54240000.dc to group 1
+iommu: Adding device 57000000.gpu to group 2
 AT91: Could not find identification node
 +5V_SYS: supplied by +VDD_MUX
 +3.3V_SYS: supplied by +VDD_MUX
@@ -236,11 +180,11 @@
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
-dmi: Firmware registration failed.
 tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT
 tegra-emc: probe of 7001b000.emc failed with error -2
 clocksource: Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
@@ -253,7 +197,6 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 64
 hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
-iommu: Adding device alarmtimer to group 60
 Initialise system trusted keyrings
 workingset: timestamp_bits=30 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
@@ -264,7 +207,7 @@
 Key type asymmetric registered
 Asymmetric key parser 'x509' registered
 bounce: pool size: 64 pages
-Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
 io scheduler noop registered
 io scheduler deadline registered
 io scheduler cfq registered (default)
@@ -274,21 +217,20 @@
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-iommu: Adding device serial8250 to group 61
 console [ttyS0] disabled
 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
 SuperH (H)SCI(F) driver initialized
 msm_serial: driver initialized
 STMicroelectronics ASC driver initialized
+Failed to attached device 54200000.dc to IOMMU_mapping
+Failed to attached device 54240000.dc to IOMMU_mapping
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 brd: module loaded
 loop: module loaded
 as3722 4-0040: AS3722 with revision 0x1 found
-iommu: Adding device as3722-pinctrl to group 62
-iommu: Adding device as3722-regulator to group 63
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
@@ -312,12 +254,7 @@
 as3722-ldo10: supplied by +5V_SYS
 +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
 +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
-iommu: Adding device as3722-rtc to group 64
-iommu: Adding device as3722-adc to group 65
-iommu: Adding device as3722-power-off to group 66
-iommu: Adding device as3722-wdt to group 67
 m25p80 spi1.0: w25q32dw (4096 Kbytes)
-iommu: Adding device Fixed MDIO bus.0 to group 68
 libphy: Fixed MDIO Bus: probed
 CAN device driver interface
 bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
@@ -359,7 +296,6 @@
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 i2c /dev entries driver
 lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
-iommu: Adding device cpufreq-tegra124 to group 69
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 Synopsys Designware Multimedia Card Interface Driver
@@ -387,27 +323,26 @@
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
 +3.3V_RUN: supplied by +3.3V_SYS
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 +VDD_LED: supplied by +VDD_MUX
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 +1.8V_RUN_CAM: supplied by +3.3V_RUN
+mmc0: new high speed MMC card at address 0001
 +VDDIO_SDMMC3: supplied by +3.3V_RUN
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 +5V_VDD_TS_SW: supplied by +5V_SYS
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 +5V_USB_HS: supplied by +5V_SYS
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (236:0)
 +5V_USB_SS: supplied by +5V_SYS
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 +3.3V_PANEL: supplied by +3.3V_RUN
 +3.3V_LP0: supplied by +3.3V_SYS
-elan_i2c 1-0015: reading cmd (0x0100) fail.
-elan_i2c 1-0015: failed to get pattern: -121
-elan_i2c 1-0015: failed to get pattern version
-elan_i2c: probe of 1-0015 failed with error -121
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (237:0)
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
+elan_i2c 1-0015: failed to read report data: -121
 +5V_HDMI_CON: supplied by +5V_SYS
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
  usb3-1: usb3-1 supply vbus not found, using dummy regulator
@@ -421,24 +356,18 @@
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
+elan_i2c 1-0015: invalid report id data (ff)
 mmc2: Invalid maximum block size, assuming 512 bytes
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
-[drm] No driver support for vblank timestamp query.
-mmc2: new high speed SDHC card at address 0007
-mmcblk2: mmc2:0007 SD08G 7.42 GiB 
-GPT:Primary header alternate_lba != Alt. header my_lba
-GPT:3014591 != 15564799
-GPT:Primary header thinks Alt. header is not at the end of the disk.
-GPT:3014591 != 15564799
-GPT: Use GNU Parted to correct GPT errors.
- mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
-Console: switching to colour frame buffer device 170x48
-drm drm: fb0:  frame buffer device
-[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+input: gpio-keys as /devices/soc0/gpio-keys/input/input1
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
 as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
++3.3V_AVDD_HDMI_AP_GATED: disabling
++1.05V_RUN: disabling
 +1.8V_RUN_CAM: disabling
 +3.3V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
@@ -446,11 +375,25 @@
 +2.8V_RUN_TOUCH: disabling
 +2.8V_RUN_CAM_AF: disabling
 +1.8V_RUN_VPP_FUSE: disabling
++VDD_LED: disabling
 +5V_VDD_TS_SW: disabling
 +5V_USB_HS: disabling
 +5V_USB_SS: disabling
++3.3V_PANEL: disabling
++1.05V_RUN_AVDD_HDMI_PLL: disabling
++5V_HDMI_CON: disabling
 EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities
+mmc2: new high speed SDHC card at address 0007
+mmcblk2: mmc2:0007 SD08G 7.42 GiB 
+GPT:Primary header alternate_lba != Alt. header my_lba
+GPT:3014591 != 15564799
+GPT:Primary header thinks Alt. header is not at the end of the disk.
+GPT:3014591 != 15564799
+GPT: Use GNU Parted to correct GPT errors.
+ mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2018-02-11 15:51:31.380460339 -0800
+++ /tmp/foob	2018-02-11 15:51:31.380460339 -0800
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -40,10 +40,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###############################
-	 3.4 MiB/s
+	 ##################################
+	 3 MiB/s
 done
-Bytes transferred = 6171744 (5e2c60 hex)
+Bytes transferred = 6216816 (5edc70 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
@@ -54,7 +54,7 @@
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5e2c60 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5edc70 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-16223-gd8a5b80 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 28 13:33:14 PST 2018
+Linux version 4.16.0-rc1-28877-g7928b2c (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Feb 11 15:34:51 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -78,14 +78,14 @@
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327679 pages, LIFO batch:31
 random: fast init done
-percpu: Embedded 17 pages/cpu @(ptrval) s39168 r8192 d22272 u69632
-pcpu-alloc: s39168 r8192 d22272 u69632 alloc=17*4096
+percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632
+pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists, mobility grouping on.  Total pages: 522751
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999512K/2097148K available (9216K kernel code, 778K rwdata, 2560K rodata, 1024K init, 299K bss, 32100K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1999508K/2097148K available (9216K kernel code, 783K rwdata, 2584K rodata, 1024K init, 298K bss, 32104K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -95,8 +95,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 779 kB)
-       .bss : 0x(ptrval) - 0x(ptrval)   ( 300 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 784 kB)
+       .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -142,66 +142,10 @@
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 8 bytes.
 tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered
-iommu: Adding device reg-dummy to group 0
-iommu: Adding device 50000000.host1x to group 1
-iommu: Adding device 54200000.dc to group 2
-iommu: Adding device 54240000.dc to group 3
-iommu: Adding device 54280000.hdmi to group 4
-iommu: Adding device 54540000.sor to group 5
-iommu: Adding device 545c0000.dpaux to group 6
-iommu: Adding device 57000000.gpu to group 7
-iommu: Adding device 60005000.timer to group 8
-iommu: Adding device 60007000.flow-controller to group 9
-iommu: Adding device 6000c800.actmon to group 10
-iommu: Adding device 6000d000.gpio to group 11
-iommu: Adding device 60020000.dma to group 12
-iommu: Adding device 70000800.apbmisc to group 13
-iommu: Adding device 70000868.pinmux to group 14
-iommu: Adding device 70006000.serial to group 15
-iommu: Adding device 7000a000.pwm to group 16
-iommu: Adding device 7000c000.i2c to group 17
-iommu: Adding device 7000c400.i2c to group 18
-iommu: Adding device 7000c500.i2c to group 19
-iommu: Adding device 7000c700.i2c to group 20
-iommu: Adding device 7000d000.i2c to group 21
-iommu: Adding device 7000d400.spi to group 22
-iommu: Adding device 7000da00.spi to group 23
-iommu: Adding device 7000e000.rtc to group 24
-iommu: Adding device 7000e400.pmc to group 25
-iommu: Adding device 7000f800.fuse to group 26
-iommu: Adding device 70019000.memory-controller to group 27
-iommu: Adding device 7001b000.emc to group 28
-iommu: Adding device 70030000.hda to group 29
-iommu: Adding device 70090000.usb to group 30
-iommu: Adding device 7009f000.padctl to group 31
-iommu: Adding device 700b0000.sdhci to group 32
-iommu: Adding device 700b0400.sdhci to group 33
-iommu: Adding device 700b0600.sdhci to group 34
-iommu: Adding device 700e2000.thermal-sensor to group 35
-iommu: Adding device 70300000.ahub to group 36
-iommu: Adding device pmu to group 37
-iommu: Adding device timer to group 38
-iommu: Adding device sdhci0_pwrseq to group 39
-iommu: Adding device backlight to group 40
-iommu: Adding device clocks to group 41
-iommu: Adding device gpio-keys to group 42
-iommu: Adding device regulators to group 43
-iommu: Adding device regulators:regulator@0 to group 44
-iommu: Adding device regulators:regulator@1 to group 45
-iommu: Adding device regulators:regulator@2 to group 46
-iommu: Adding device regulators:regulator@3 to group 47
-iommu: Adding device regulators:regulator@4 to group 48
-iommu: Adding device regulators:regulator@5 to group 49
-iommu: Adding device regulators:regulator@6 to group 50
-iommu: Adding device regulators:regulator@7 to group 51
-iommu: Adding device regulators:regulator@8 to group 52
-iommu: Adding device regulators:regulator@9 to group 53
-iommu: Adding device regulators:regulator@10 to group 54
-iommu: Adding device regulators:regulator@11 to group 55
-iommu: Adding device regulators:regulator@12 to group 56
-iommu: Adding device sound to group 57
-iommu: Adding device gpio-restart to group 58
-iommu: Adding device panel to group 59
+iommu: Adding device 50000000.host1x to group 0
+iommu: Adding device 54200000.dc to group 1
+iommu: Adding device 54240000.dc to group 1
+iommu: Adding device 57000000.gpu to group 2
 +5V_SYS: supplied by +VDD_MUX
 +3.3V_SYS: supplied by +VDD_MUX
 +VDD_LED: Failed to request enable GPIO122: -517
@@ -237,6 +181,7 @@
 Bluetooth: SCO socket layer initialized
 clocksource: Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
@@ -247,10 +192,8 @@
 RPC: Registered udp transport module.
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
-iommu: Adding device regulatory.0 to group 60
 PCI: CLS 0 bytes, default 64
 hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
-iommu: Adding device alarmtimer to group 61
 Initialise system trusted keyrings
 workingset: timestamp_bits=30 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
@@ -267,7 +210,6 @@
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-iommu: Adding device serial8250 to group 62
 console [ttyS0] disabled
 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
@@ -279,8 +221,6 @@
 panel-simple panel: panel supply power not found, using dummy regulator
 loop: module loaded
 as3722 4-0040: AS3722 with revision 0x1 found
-iommu: Adding device as3722-pinctrl to group 63
-iommu: Adding device as3722-regulator to group 64
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
@@ -304,16 +244,8 @@
 as3722-ldo10: supplied by +5V_SYS
 +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
 +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
-iommu: Adding device as3722-rtc to group 65
-iommu: Adding device as3722-adc to group 66
-iommu: Adding device as3722-power-off to group 67
-iommu: Adding device as3722-wdt to group 68
-iommu: Adding device cros-ec-ctl.0.auto to group 69
-iommu: Adding device 7000d400.spi:cros-ec@0:i2c-tunnel to group 70
-iommu: Adding device 7000d400.spi:cros-ec@0:keyboard-controller to group 71
 cros-ec-spi spi0.0: Chrome EC device registered
 m25p80 spi1.0: w25q32dw (4096 Kbytes)
-iommu: Adding device Fixed MDIO bus.0 to group 72
 libphy: Fixed MDIO Bus: probed
 CAN device driver interface
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
@@ -347,7 +279,6 @@
 gspca_main: v2.14.0 registered
 lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
 tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0)
-iommu: Adding device cpufreq-tegra124 to group 73
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
@@ -359,21 +290,19 @@
 mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-iommu: Adding device snd-soc-dummy to group 74
-iommu: Adding device 70301100.i2s to group 75
 tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
-max98090 0-0010: MAX98090 REVID=0x43
-max98090 0-0010: use default 2.8v micbias
-tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok
 mmc0: new high speed MMC card at address 0001
+max98090 0-0010: MAX98090 REVID=0x43
 mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+max98090 0-0010: use default 2.8v micbias
 mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1
 mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0)
+tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok
+input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2
 NET: Registered protocol family 10
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 Segment Routing with IPv6
 mip6: Mobile IPv6
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
@@ -425,39 +354,46 @@
 mmc2: Invalid maximum block size, assuming 512 bytes
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
-[drm] No driver support for vblank timestamp query.
-mmc2: new high speed SDHC card at address 0007
-mmcblk2: mmc2:0007 SD08G 7.42 GiB 
-GPT:Primary header alternate_lba != Alt. header my_lba
-GPT:3014591 != 15564799
-GPT:Primary header thinks Alt. header is not at the end of the disk.
-GPT:3014591 != 15564799
-GPT: Use GNU Parted to correct GPT errors.
- mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
-Console: switching to colour frame buffer device 170x48
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
-drm drm: fb0:  frame buffer device
-[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-input: gpio-keys as /devices/soc0/gpio-keys/input/input4
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822)
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+input: gpio-keys as /devices/soc0/gpio-keys/input/input3
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
-platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
++3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.8V_RUN_CAM: disabling
+platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
 +1.2V_RUN_CAM_FRONT: disabling
+cfg80211: failed to load regulatory.db
 +1.05V_RUN_CAM_REAR: disabling
 +2.8V_RUN_TOUCH: disabling
 +2.8V_RUN_CAM_AF: disabling
 +1.8V_RUN_VPP_FUSE: disabling
++VDD_LED: disabling
 +5V_VDD_TS_SW: disabling
 +5V_USB_HS: disabling
 +5V_USB_SS: disabling
++3.3V_PANEL: disabling
++1.05V_RUN_AVDD_HDMI_PLL: disabling
++5V_HDMI_CON: disabling
 ALSA device list:
-  #0: tegra-hda at 0x70038000 irq 343
   #1: GoogleNyanBig
-cfg80211: failed to load regulatory.db
+mmc2: new high speed SDHC card at address 0007
+mmcblk2: mmc2:0007 SD08G 7.42 GiB 
+GPT:Primary header alternate_lba != Alt. header my_lba
+GPT:3014591 != 15564799
+GPT:Primary header thinks Alt. header is not at the end of the disk.
+GPT:3014591 != 15564799
+GPT: Use GNU Parted to correct GPT errors.
+ mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+tegra-sor 54540000.sor: failed to probe output: -517
 EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
+panel-simple panel: panel supply power not found, using dummy regulator
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2018-02-11 15:51:31.404460450 -0800
+++ /tmp/foob	2018-02-11 15:51:31.408460469 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -40,21 +40,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##########################################
-	 3.4 MiB/s
+	 #############################################
+	 3.3 MiB/s
 done
-Bytes transferred = 6337104 (60b250 hex)
+Bytes transferred = 6383728 (616870 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.4 MiB/s
+	 3.2 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x60b250 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x616870 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-217931-gd8a5b80 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 28 13:34:57 PST 2018
+Linux version 4.16.0-rc1-230585-g7928b2c (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Feb 11 15:35:30 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -78,14 +78,14 @@
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327679 pages, LIFO batch:31
 random: fast init done
-percpu: Embedded 17 pages/cpu @(ptrval) s39168 r8192 d22272 u69632
-pcpu-alloc: s39168 r8192 d22272 u69632 alloc=17*4096
+percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632
+pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists, mobility grouping on.  Total pages: 522751
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998488K/2097148K available (9216K kernel code, 778K rwdata, 2820K rodata, 1024K init, 299K bss, 33124K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1998484K/2097148K available (9216K kernel code, 783K rwdata, 2844K rodata, 1024K init, 298K bss, 33128K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -95,8 +95,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 779 kB)
-       .bss : 0x(ptrval) - 0x(ptrval)   ( 300 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 784 kB)
+       .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -142,66 +142,10 @@
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 8 bytes.
 tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered
-iommu: Adding device reg-dummy to group 0
-iommu: Adding device 50000000.host1x to group 1
-iommu: Adding device 54200000.dc to group 2
-iommu: Adding device 54240000.dc to group 3
-iommu: Adding device 54280000.hdmi to group 4
-iommu: Adding device 54540000.sor to group 5
-iommu: Adding device 545c0000.dpaux to group 6
-iommu: Adding device 57000000.gpu to group 7
-iommu: Adding device 60005000.timer to group 8
-iommu: Adding device 60007000.flow-controller to group 9
-iommu: Adding device 6000c800.actmon to group 10
-iommu: Adding device 6000d000.gpio to group 11
-iommu: Adding device 60020000.dma to group 12
-iommu: Adding device 70000800.apbmisc to group 13
-iommu: Adding device 70000868.pinmux to group 14
-iommu: Adding device 70006000.serial to group 15
-iommu: Adding device 7000a000.pwm to group 16
-iommu: Adding device 7000c000.i2c to group 17
-iommu: Adding device 7000c400.i2c to group 18
-iommu: Adding device 7000c500.i2c to group 19
-iommu: Adding device 7000c700.i2c to group 20
-iommu: Adding device 7000d000.i2c to group 21
-iommu: Adding device 7000d400.spi to group 22
-iommu: Adding device 7000da00.spi to group 23
-iommu: Adding device 7000e000.rtc to group 24
-iommu: Adding device 7000e400.pmc to group 25
-iommu: Adding device 7000f800.fuse to group 26
-iommu: Adding device 70019000.memory-controller to group 27
-iommu: Adding device 7001b000.emc to group 28
-iommu: Adding device 70030000.hda to group 29
-iommu: Adding device 70090000.usb to group 30
-iommu: Adding device 7009f000.padctl to group 31
-iommu: Adding device 700b0000.sdhci to group 32
-iommu: Adding device 700b0400.sdhci to group 33
-iommu: Adding device 700b0600.sdhci to group 34
-iommu: Adding device 700e2000.thermal-sensor to group 35
-iommu: Adding device 70300000.ahub to group 36
-iommu: Adding device pmu to group 37
-iommu: Adding device timer to group 38
-iommu: Adding device sdhci0_pwrseq to group 39
-iommu: Adding device backlight to group 40
-iommu: Adding device clocks to group 41
-iommu: Adding device gpio-keys to group 42
-iommu: Adding device regulators to group 43
-iommu: Adding device regulators:regulator@0 to group 44
-iommu: Adding device regulators:regulator@1 to group 45
-iommu: Adding device regulators:regulator@2 to group 46
-iommu: Adding device regulators:regulator@3 to group 47
-iommu: Adding device regulators:regulator@4 to group 48
-iommu: Adding device regulators:regulator@5 to group 49
-iommu: Adding device regulators:regulator@6 to group 50
-iommu: Adding device regulators:regulator@7 to group 51
-iommu: Adding device regulators:regulator@8 to group 52
-iommu: Adding device regulators:regulator@9 to group 53
-iommu: Adding device regulators:regulator@10 to group 54
-iommu: Adding device regulators:regulator@11 to group 55
-iommu: Adding device regulators:regulator@12 to group 56
-iommu: Adding device sound to group 57
-iommu: Adding device gpio-restart to group 58
-iommu: Adding device panel to group 59
+iommu: Adding device 50000000.host1x to group 0
+iommu: Adding device 54200000.dc to group 1
+iommu: Adding device 54240000.dc to group 1
+iommu: Adding device 57000000.gpu to group 2
 +5V_SYS: supplied by +VDD_MUX
 +3.3V_SYS: supplied by +VDD_MUX
 +VDD_LED: Failed to request enable GPIO122: -517
@@ -237,6 +181,7 @@
 Bluetooth: SCO socket layer initialized
 clocksource: Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
@@ -247,10 +192,8 @@
 RPC: Registered udp transport module.
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
-iommu: Adding device regulatory.0 to group 60
 PCI: CLS 0 bytes, default 64
 hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
-iommu: Adding device alarmtimer to group 61
 Initialise system trusted keyrings
 workingset: timestamp_bits=30 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
@@ -267,7 +210,6 @@
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-iommu: Adding device serial8250 to group 62
 console [ttyS0] disabled
 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
@@ -279,8 +221,6 @@
 panel-simple panel: panel supply power not found, using dummy regulator
 loop: module loaded
 as3722 4-0040: AS3722 with revision 0x1 found
-iommu: Adding device as3722-pinctrl to group 63
-iommu: Adding device as3722-regulator to group 64
 as3722-sd2: supplied by +5V_SYS
 as3722-sd3: supplied by +5V_SYS
 +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV
@@ -304,16 +244,8 @@
 as3722-ldo10: supplied by +5V_SYS
 +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
 +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
-iommu: Adding device as3722-rtc to group 65
-iommu: Adding device as3722-adc to group 66
-iommu: Adding device as3722-power-off to group 67
-iommu: Adding device as3722-wdt to group 68
-iommu: Adding device cros-ec-ctl.0.auto to group 69
-iommu: Adding device 7000d400.spi:cros-ec@0:i2c-tunnel to group 70
-iommu: Adding device 7000d400.spi:cros-ec@0:keyboard-controller to group 71
 cros-ec-spi spi0.0: Chrome EC device registered
 m25p80 spi1.0: w25q32dw (4096 Kbytes)
-iommu: Adding device Fixed MDIO bus.0 to group 72
 libphy: Fixed MDIO Bus: probed
 CAN device driver interface
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
@@ -347,7 +279,6 @@
 gspca_main: v2.14.0 registered
 lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
 tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0)
-iommu: Adding device cpufreq-tegra124 to group 73
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
@@ -359,21 +290,19 @@
 mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-iommu: Adding device snd-soc-dummy to group 74
-iommu: Adding device 70301100.i2s to group 75
 tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
-max98090 0-0010: MAX98090 REVID=0x43
-max98090 0-0010: use default 2.8v micbias
-tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok
 mmc0: new high speed MMC card at address 0001
+max98090 0-0010: MAX98090 REVID=0x43
 mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+max98090 0-0010: use default 2.8v micbias
 mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1
 mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0)
+tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok
+input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2
 NET: Registered protocol family 10
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 Segment Routing with IPv6
 mip6: Mobile IPv6
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
@@ -433,40 +362,50 @@
 mmc2: Invalid maximum block size, assuming 512 bytes
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
-[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
-[drm] No driver support for vblank timestamp query.
-usb 1-2: new high-speed USB device number 2 using tegra-xusb
-mmc2: new high speed SDHC card at address 0007
-mmcblk2: mmc2:0007 SD08G 7.42 GiB 
-GPT:Primary header alternate_lba != Alt. header my_lba
-GPT:3014591 != 15564799
-GPT:Primary header thinks Alt. header is not at the end of the disk.
-GPT:3014591 != 15564799
-GPT: Use GNU Parted to correct GPT errors.
- mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
-Console: switching to colour frame buffer device 170x48
-drm drm: fb0:  frame buffer device
-[drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-input: gpio-keys as /devices/soc0/gpio-keys/input/input4
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824)
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+input: gpio-keys as /devices/soc0/gpio-keys/input/input3
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
+cfg80211: failed to load regulatory.db
++3.3V_AVDD_HDMI_AP_GATED: disabling
 +1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
 +2.8V_RUN_TOUCH: disabling
 +2.8V_RUN_CAM_AF: disabling
 +1.8V_RUN_VPP_FUSE: disabling
++VDD_LED: disabling
 +5V_VDD_TS_SW: disabling
++3.3V_PANEL: disabling
++1.05V_RUN_AVDD_HDMI_PLL: disabling
++5V_HDMI_CON: disabling
 ALSA device list:
-  #0: tegra-hda at 0x70038000 irq 343
   #1: GoogleNyanBig
-cfg80211: failed to load regulatory.db
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
 EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
+usb 1-2: new high-speed USB device number 2 using tegra-xusb
+mmc2: new high speed SDHC card at address 0007
+mmcblk2: mmc2:0007 SD08G 7.42 GiB 
+GPT:Primary header alternate_lba != Alt. header my_lba
+GPT:3014591 != 15564799
+GPT:Primary header thinks Alt. header is not at the end of the disk.
+GPT:3014591 != 15564799
+GPT: Use GNU Parted to correct GPT errors.
+ mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
 uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
 input: HD WebCam: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+usb 1-3: new high-speed USB device number 3 using tegra-xusb
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:3.
@@ -474,5 +413,7 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.474389] usb 1-3: new high-speed USB device number 3 using tegra-xusb
-asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65
+root@(none):/# [    3.709875] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65
+tegra-sor 54540000.sor: failed to probe output: -517
+panel-simple panel: panel supply power not found, using dummy regulator
+usb 1-1: new high-speed USB device number 4 using tegra-xusb
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2018-02-11 15:51:31.424460542 -0800
+++ /tmp/foob	2018-02-11 15:51:31.428460561 -0800
@@ -32,7 +32,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801342 us
+Bootloader-Cpu Init at (time stamp): 1801055 us
 
 Pinmux changes applied in kernel way
 
@@ -60,25 +60,25 @@
 The proc BoardInfo: 0x0176:0x0001:0x01:0x43:0x00
 FastbootAddAtag: setting ATAG (0)
 
-Board Id Read Time: 3 us
+Board Id Read Time: 4 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801316  us
-Bootloader (AosInit) time: 733448 us
-Bootloader Main Init time: 180058 us
-BlockDevMgrInit time: 157555 us
+Miscellaneous avp time: 1801028  us
+Bootloader (AosInit) time: 734257 us
+Bootloader Main Init time: 180084 us
+BlockDevMgrInit time: 157512 us
 PartMgrInit time: 8 us
 StorMgrInit time: 30 us
 FsMgrInit time: 2 us
-Partition Table load: 77111 us 
-Display init time: 574527 us
-Kernel read time: 1510 msec
-Load Kernel Size:   20013056 Bytes
-Bl Kernel ReadSpeed: 13253000 Bytes/sec
-Pre-Kernel Jump time: 4245481 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 9373382 us
+Partition Table load: 76809 us 
+Display init time: 574695 us
+Kernel read time: 1581 msec
+Load Kernel Size:   20967424 Bytes
+Bl Kernel ReadSpeed: 13262000 Bytes/sec
+Pre-Kernel Jump time: 4424981 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 9627078 us
 Booting Linux on physical CPU 0x0000000000 [0x4e0f0000]
-Linux version 4.15.0-217931-gd8a5b80 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 28 13:41:20 PST 2018
+Linux version 4.16.0-rc1-348826-g7928b2cbe55b (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Feb 11 15:41:38 PST 2018
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
 efi: Getting EFI parameters from FDT:
@@ -88,7 +88,7 @@
 NUMA: Faking a node at [mem 0x0000000000000000-0x00000000ec5fffff]
 NUMA: NODE_DATA [mem 0xec5c7b00-0xec5c95ff]
 Zone ranges:
-  DMA      [mem 0x0000000080000000-0x00000000ec5fffff]
+  DMA32    [mem 0x0000000080000000-0x00000000ec5fffff]
   Normal   empty
 Movable zone start for each node
 Early memory node ranges
@@ -96,25 +96,12 @@
 Initmem setup node 0 [mem 0x0000000080000000-0x00000000ec5fffff]
 /cpus/cpu@1: missing enable-method property
 random: fast init done
-percpu: Embedded 23 pages/cpu @        (ptrval) s55168 r8192 d30848 u94208
+percpu: Embedded 24 pages/cpu @        (ptrval) s57984 r8192 d32128 u98304
 Detected PIPT I-cache on CPU0
 Built 1 zonelists, mobility grouping on.  Total pages: 436968
-Policy zone: DMA
+Policy zone: DMA32
 Kernel command line: tegraid=13.1.3.0.0 mem=1734M@2048M memtype=255 vpr=151M@3817M ddr_die=2048M@2048M section=256M commchip_id=0 usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 usbcore.old_scheme_first=1 lp0_vec=0@0x0 tegra_fbmem=32899072@0xad012000 core_edp_mv=1150 core_edp_ma=4000 pmuboard=0x0176:0x0001:0x01:0x43:0x00 displayboard=0x0162:0x0001:0x00:0x42:0x00 power_supply=Adapter audio_codec=rt5640 board_info=0x0176:0x0001:0x01:0x43:0x00 tegraboot=sdmmc gpt gpt_sector=192511 modem_id=0 android.kerneltype=normal
-Memory: 1706120K/1775616K available (9404K kernel code, 1150K rwdata, 4460K rodata, 1088K init, 395K bss, 53112K reserved, 16384K cma-reserved)
-Virtual kernel memory layout:
-    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
-    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
-      .text : 0x        (ptrval) - 0x        (ptrval)   (  9408 KB)
-    .rodata : 0x        (ptrval) - 0x        (ptrval)   (  4480 KB)
-      .init : 0x        (ptrval) - 0x        (ptrval)   (  1088 KB)
-      .data : 0x        (ptrval) - 0x        (ptrval)   (  1151 KB)
-       .bss : 0x        (ptrval) - 0x        (ptrval)   (   396 KB)
-    fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
-    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
-    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
-              0xffff7e0000000000 - 0xffff7e0001b18000   (    27 MB actual)
-    memory  : 0xffff800000000000 - 0xffff80006c600000   (  1734 MB)
+Memory: 1705172K/1775616K available (9980K kernel code, 1250K rwdata, 4628K rodata, 1152K init, 402K bss, 54060K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
@@ -134,14 +121,16 @@
 Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
 Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
 Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
-ASID allocator initialised with 256 entries
+ASID allocator initialised with 128 entries
 Hierarchical SRCU implementation.
 EFI services will not be available.
 smp: Bringing up secondary CPUs ...
 smp: Brought up 1 node, 1 CPU
 SMP: Total of 1 processors activated.
 CPU features: detected feature: 32-bit EL0 Support
+CPU features: detected feature: Kernel page table isolation (KPTI)
 CPU: All CPU(s) started at EL1
+alternatives: patching kernel code
 devtmpfs: initialized
 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 futex hash table entries: 256 (order: 3, 32768 bytes)
@@ -149,13 +138,14 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.136:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.140:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000f790482e, 1 data @ 0000000013f10d18)
+vdso: 2 pages (1 code @ 000000006cd15984, 1 data @ 0000000019ab4774)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
 HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
+cryptd: max_cpu_qlen set to 1000
 ACPI: Interpreter disabled.
 +5V_SYS: supplied by +VDD_MUX
 +3.3V_SYS: supplied by +VDD_MUX
@@ -180,13 +170,13 @@
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
-dmi: Firmware registration failed.
 Advanced Linux Sound Architecture Driver Initialized.
 clocksource: Switched to clocksource arch_sys_counter
 VFS: Disk quotas dquot_6.6.0
 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
 pnp: PnP ACPI: disabled
 NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
 TCP established hash table entries: 16384 (order: 5, 131072 bytes)
 TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
 TCP: Hash tables configured (established 16384 bind 16384)
@@ -216,6 +206,7 @@
 io scheduler mq-deadline registered
 io scheduler kyber registered
 tegra-xusb-padctl 7009f000.padctl: deprecated DT, using legacy driver
+EINJ: ACPI disabled.
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
@@ -228,9 +219,9 @@
 loop: module loaded
 libphy: Fixed MDIO Bus: probed
 tun: Universal TUN/TAP device driver, 1.6
-thunder-xcv, ver 1.0
-thunder-BGX, ver 1.0
-thunder-nic, ver 1.0
+thunder_xcv, ver 1.0
+thunder_bgx, ver 1.0
+nicpf, ver 1.0
 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
 e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
@@ -267,25 +258,25 @@
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
 mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 NET: Registered protocol family 17
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 9pnet: Installing 9P2000 support
 Key type dns_resolver registered
-registered taskstats version 1
-Loading compiled-in X.509 certificates
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+registered taskstats version 1
 mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+Loading compiled-in X.509 certificates
 mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (240:0)
-+VDD_LED: supplied by +VDD_MUX
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
++VDD_LED: supplied by +VDD_MUX
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
 +5V_HDMI_CON: supplied by +5V_SYS
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-hctosys: unable to open rtc device (rtc0)
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
+hctosys: unable to open rtc device (rtc0)
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +VDD_LED: disabling
@@ -295,7 +286,7 @@
 +5V_HDMI_CON: disabling
 ALSA device list:
   No soundcards found.
-Freeing unused kernel memory: 1088K
+Freeing unused kernel memory: 1152K
 
 System initialization...
 
Diff for ./tegra186-p2771-0000/tegra186-p2771-0000/defconfig%jetson-tx2_log.txt
Binary files /tmp/fooa and /tmp/foob differ
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-02-11 15:51:31.508460931 -0800
+++ /tmp/foob	2018-02-11 15:51:31.512460950 -0800
@@ -47,29 +47,29 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##############################
-	 3.3 MiB/s
+	 ####################################
+	 4 MiB/s
 done
-Bytes transferred = 8065536 (7b1200 hex)
+Bytes transferred = 8159744 (7c8200 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 3.4 MiB/s
+	 4.1 MiB/s
 done
-Bytes transferred = 21160 (52a8 hex)
+Bytes transferred = 21686 (54b6 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x7b1200 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x7c8200 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
-   Using Device Tree in place at 02408000, end 024102a7
+   Using Device Tree in place at 02408000, end 024104b5
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-336172-gd8a5b80568a9 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 28 13:34:20 PST 2018
+Linux version 4.16.0-rc1-348826-g7928b2cbe55b (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Feb 11 15:35:47 PST 2018
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -84,14 +84,14 @@
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 65536 pages, LIFO batch:15
 random: fast init done
-percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632
-pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096
+percpu: Embedded 17 pages/cpu @(ptrval) s39232 r8192 d22208 u69632
+pcpu-alloc: s39232 r8192 d22208 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 
 Built 1 zonelists, mobility grouping on.  Total pages: 260608
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 953376K/1048576K available (11264K kernel code, 1602K rwdata, 4296K rodata, 2048K init, 404K bss, 29664K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 953404K/1048576K available (11264K kernel code, 1570K rwdata, 4348K rodata, 2048K init, 405K bss, 29636K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -101,8 +101,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   (1603 kB)
-       .bss : 0x(ptrval) - 0x(ptrval)   ( 405 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   (1571 kB)
+       .bss : 0x(ptrval) - 0x(ptrval)   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -163,9 +163,9 @@
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
-dmi: Firmware registration failed.
 clocksource: Switched to clocksource timer_us
 NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
@@ -189,7 +189,7 @@
 Key type asymmetric registered
 Asymmetric key parser 'x509' registered
 bounce: pool size: 64 pages
-Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
 io scheduler noop registered
 io scheduler deadline registered
 io scheduler cfq registered (default)
@@ -222,6 +222,8 @@
 pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
 pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
+pci 0000:01:00.0: supports D1 D2
+pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
 PCI: bus1: Fast back to back transfers disabled
 pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
 pci 0000:00:01.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff]
@@ -238,15 +240,16 @@
 pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
 Disabling cpuidle LP2 state, since PCIe IRQs are in use
 pcieport 0000:00:01.0: enabling device (0140 -> 0143)
-pcieport 0000:00:01.0: Signaling PME with IRQ 295
+pcieport 0000:00:01.0: Signaling PME with IRQ 298
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
 console [ttyS0] disabled
-70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 279, base_baud = 13500000) is a Tegra
+70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 282, base_baud = 13500000) is a Tegra
 console [ttyS0] enabled
 SuperH (H)SCI(F) driver initialized
 msm_serial: driver initialized
 STMicroelectronics ASC driver initialized
+tegra-dc 54240000.dc: Linked as a consumer to 54200000.dc
 tegra-hdmi 54280000.hdmi: 54280000.hdmi supply hdmi not found, using dummy regulator
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -266,8 +269,7 @@
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xb6c2d640, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xcad2cbd4, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -296,7 +298,7 @@
 tegra-ehci: probe of c5004000.usb failed with error -110
 tegra-ehci c5008000.usb: EHCI Host Controller
 tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci c5008000.usb: irq 290, io mem 0xc5008000
+tegra-ehci c5008000.usb: irq 293, io mem 0xc5008000
 tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
@@ -340,13 +342,13 @@
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
+tegra-ehci c5000000.usb: irq 291, io mem 0xc5000000
 usb 1-1: new high-speed USB device number 2 using tegra-ehci
 mmc1: new high speed SD card at address b368
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
-hub 2-0:1.0: USB hub found
  mmcblk1: p1 p2
+hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2018-02-11 15:51:31.564461191 -0800
+++ /tmp/foob	2018-02-11 15:51:31.564461191 -0800
@@ -45,29 +45,29 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###############################
+	 ##################################
 	 4 MiB/s
 done
-Bytes transferred = 6171744 (5e2c60 hex)
+Bytes transferred = 6216816 (5edc70 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 3.4 MiB/s
+	 4.1 MiB/s
 done
-Bytes transferred = 21160 (52a8 hex)
+Bytes transferred = 21686 (54b6 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5e2c60 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5edc70 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
-   Using Device Tree in place at 02408000, end 024102a7
+   Using Device Tree in place at 02408000, end 024104b5
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-16223-gd8a5b80 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 28 13:33:14 PST 2018
+Linux version 4.16.0-rc1-28877-g7928b2c (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Feb 11 15:34:51 PST 2018
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -81,14 +81,14 @@
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 65536 pages, LIFO batch:15
 random: fast init done
-percpu: Embedded 17 pages/cpu @(ptrval) s39168 r8192 d22272 u69632
-pcpu-alloc: s39168 r8192 d22272 u69632 alloc=17*4096
+percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632
+pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 
 Built 1 zonelists, mobility grouping on.  Total pages: 260608
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 959424K/1048576K available (9216K kernel code, 778K rwdata, 2560K rodata, 1024K init, 299K bss, 23616K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 959416K/1048576K available (9216K kernel code, 783K rwdata, 2584K rodata, 1024K init, 298K bss, 23624K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -98,8 +98,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 779 kB)
-       .bss : 0x(ptrval) - 0x(ptrval)   ( 300 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 784 kB)
+       .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
 	Tasks RCU enabled.
@@ -164,6 +164,7 @@
 Bluetooth: SCO socket layer initialized
 clocksource: Switched to clocksource timer_us
 NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
@@ -216,6 +217,8 @@
 pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
 pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
+pci 0000:01:00.0: supports D1 D2
+pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
 PCI: bus1: Fast back to back transfers disabled
 pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
 pci 0000:00:01.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff]
@@ -232,15 +235,16 @@
 pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
 Disabling cpuidle LP2 state, since PCIe IRQs are in use
 pcieport 0000:00:01.0: enabling device (0140 -> 0143)
-pcieport 0000:00:01.0: Signaling PME with IRQ 295
+pcieport 0000:00:01.0: Signaling PME with IRQ 298
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
 console [ttyS0] disabled
-70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 279, base_baud = 13500000) is a Tegra
+70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 282, base_baud = 13500000) is a Tegra
 console [ttyS0] enabled
 console [ttyS0] enabled
 bootconsole [earlycon0] disabled
 bootconsole [earlycon0] disabled
+tegra-dc 54240000.dc: Linked as a consumer to 54200000.dc
 tegra-hdmi 54280000.hdmi: 54280000.hdmi supply hdmi not found, using dummy regulator
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -256,8 +260,7 @@
 igb: Copyright (c) 2007-2014 Intel Corporation.
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x9c1a3dfa, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x633e9451, 00:01:c0:13:7d:63, XID 081000c0 IRQ 299
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -280,7 +283,7 @@
 tegra-ehci: probe of c5004000.usb failed with error -110
 tegra-ehci c5008000.usb: EHCI Host Controller
 tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci c5008000.usb: irq 290, io mem 0xc5008000
+tegra-ehci c5008000.usb: irq 293, io mem 0xc5008000
 tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
@@ -322,19 +325,19 @@
 Bluetooth: RFCOMM ver 1.11
 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
 Bluetooth: BNEP socket layer initialized
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
 Bluetooth: HIDP socket layer initialized
 Key type dns_resolver registered
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
 mmc1: new high speed SD card at address b368
-utmi_phy_clk_enable: timeout waiting for phy to stabilize
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
- mmcblk1: p1 p2
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
+tegra-ehci c5000000.usb: irq 291, io mem 0xc5000000
+ mmcblk1: p1 p2
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig%jetson-tx1_log.txt
--- /tmp/fooa	2018-02-11 15:51:31.588461302 -0800
+++ /tmp/foob	2018-02-11 15:51:31.588461302 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 729615 us
-Basic modules init took 350291 us
+Tegraboot started after 838507 us
+Basic modules init took 348582 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14365 us
-Carveout took 252663 us
-CPU initialization took 92445 us
-Total time taken by TegraBoot 709764 us
+Next stage binary read took 14363 us
+Carveout took 252674 us
+CPU initialization took 92447 us
+Total time taken by TegraBoot 708066 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.570] LPDDR4 Training: Number of tables = 10
+64b[0001.675] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,21 +117,21 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig%jetson-tx1
-16710144 bytes read in 859 ms (18.6 MiB/s)
+17601024 bytes read in 885 ms (19 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-44764 bytes read in 454 ms (95.7 KiB/s)
+44914 bytes read in 454 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 495 ms (3.1 MiB/s)
+1627787 bytes read in 496 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Using Device Tree in place at 0000000082000000, end 000000008200dedb
+   Using Device Tree in place at 0000000082000000, end 000000008200df71
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-16223-gd8a5b80 (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 28 13:38:01 PST 2018
+Linux version 4.16.0-rc1-28877-g7928b2c (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Feb 11 15:39:07 PST 2018
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -143,7 +143,7 @@
 NUMA: Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
 NUMA: NODE_DATA [mem 0x13ffb6e00-0x13ffb88ff]
 Zone ranges:
-  DMA      [mem 0x0000000080000000-0x00000000ffffffff]
+  DMA32    [mem 0x0000000080000000-0x00000000ffffffff]
   Normal   [mem 0x0000000100000000-0x000000013fffffff]
 Movable zone start for each node
 Early memory node ranges
@@ -151,9 +151,9 @@
   node   0: [mem 0x0000000100000000-0x000000013fffffff]
 Initmem setup node 0 [mem 0x0000000080000000-0x000000013fffffff]
 On node 0 totalpages: 782848
-  DMA zone: 8192 pages used for memmap
-  DMA zone: 0 pages reserved
-  DMA zone: 520704 pages, LIFO batch:31
+  DMA32 zone: 8192 pages used for memmap
+  DMA32 zone: 0 pages reserved
+  DMA32 zone: 520704 pages, LIFO batch:31
   Normal zone: 4096 pages used for memmap
   Normal zone: 262144 pages, LIFO batch:31
 psci: probing for conduit method from DT.
@@ -161,8 +161,8 @@
 psci: Using standard PSCI v0.2 function IDs
 psci: MIGRATE_INFO_TYPE not supported.
 random: fast init done
-percpu: Embedded 23 pages/cpu @        (ptrval) s55168 r8192 d30848 u94208
-pcpu-alloc: s55168 r8192 d30848 u94208 alloc=23*4096
+percpu: Embedded 24 pages/cpu @        (ptrval) s57984 r8192 d32128 u98304
+pcpu-alloc: s57984 r8192 d32128 u98304 alloc=24*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
@@ -171,20 +171,7 @@
 Policy zone: Normal
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2982436K/3131392K available (9468K kernel code, 1150K rwdata, 4596K rodata, 1088K init, 395K bss, 132572K reserved, 16384K cma-reserved)
-Virtual kernel memory layout:
-    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
-    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
-      .text : 0x        (ptrval) - 0x        (ptrval)   (  9472 KB)
-    .rodata : 0x        (ptrval) - 0x        (ptrval)   (  4608 KB)
-      .init : 0x        (ptrval) - 0x        (ptrval)   (  1088 KB)
-      .data : 0x        (ptrval) - 0x        (ptrval)   (  1151 KB)
-       .bss : 0x        (ptrval) - 0x        (ptrval)   (   396 KB)
-    fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
-    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
-    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
-              0xffff7e0000000000 - 0xffff7e0003000000   (    48 MB actual)
-    memory  : 0xffff800000000000 - 0xffff8000c0000000   (  3072 MB)
+Memory: 2981536K/3131392K available (9980K kernel code, 1252K rwdata, 4764K rodata, 1152K init, 404K bss, 133472K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
@@ -207,7 +194,7 @@
 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
 Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
-ASID allocator initialised with 65536 entries
+ASID allocator initialised with 32768 entries
 Hierarchical SRCU implementation.
 Speedo Revision 4
 Tegra Revision: A01 SKU: 1 CPU Process: -22 SoC Process: -22
@@ -222,6 +209,7 @@
 smp: Brought up 1 node, 4 CPUs
 SMP: Total of 4 processors activated.
 CPU features: detected feature: 32-bit EL0 Support
+CPU features: detected feature: Kernel page table isolation (KPTI)
 CPU: All CPU(s) started at EL2
 alternatives: patching kernel code
 devtmpfs: initialized
@@ -231,13 +219,14 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.268:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.276:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 000000002c74736f, 1 data @ 00000000cbc90819)
+vdso: 2 pages (1 code @ 00000000e2486ee5, 1 data @ 0000000047aaff5d)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
 HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
+cryptd: max_cpu_qlen set to 1000
 ACPI: Interpreter disabled.
 vgaarb: loaded
 SCSI subsystem initialized
@@ -249,13 +238,13 @@
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
-dmi: Firmware registration failed.
 Advanced Linux Sound Architecture Driver Initialized.
 clocksource: Switched to clocksource arch_sys_counter
 VFS: Disk quotas dquot_6.6.0
 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
 pnp: PnP ACPI: disabled
 NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
 TCP established hash table entries: 32768 (order: 6, 262144 bytes)
 TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
 TCP: Hash tables configured (established 32768 bind 32768)
@@ -268,7 +257,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 809a7000
+kvm [1]: IDMAP page: 80a2f000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
@@ -289,6 +278,7 @@
 io scheduler cfq registered (default)
 io scheduler mq-deadline registered
 io scheduler kyber registered
+EINJ: ACPI disabled.
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
@@ -304,9 +294,9 @@
 loop: module loaded
 libphy: Fixed MDIO Bus: probed
 tun: Universal TUN/TAP device driver, 1.6
-thunder-xcv, ver 1.0
-thunder-BGX, ver 1.0
-thunder-nic, ver 1.0
+thunder_xcv, ver 1.0
+thunder_bgx, ver 1.0
+nicpf, ver 1.0
 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
 e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
@@ -346,7 +336,6 @@
 hctosys: unable to open rtc device (rtc0)
 ALSA device list:
   No soundcards found.
-Waiting for root device PARTUUID=00000000-0001-0000-788f-a75600000000...
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 SDW16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SDW16G partition 1 4.00 MiB
@@ -358,7 +347,7 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 1088K
+Freeing unused kernel memory: 1152K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2018-02-11 15:51:31.616461432 -0800
+++ /tmp/foob	2018-02-11 15:51:31.620461451 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 851030 us
-Basic modules init took 348535 us
-Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14396 us
-Carveout took 252666 us
-CPU initialization took 92436 us
-Total time taken by TegraBoot 708033 us
+Tegraboot started after 740079 us
+Basic modules init took 350072 us
+Sec Bootdevice Read Time = 203 ms, Read Size = 8459 KB
+Next stage binary read took 14363 us
+Carveout took 252671 us
+CPU initialization took 93061 us
+Total time taken by TegraBoot 710167 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.687] LPDDR4 Training: Number of tables = 10
+64b[0001.581] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,21 +117,21 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-16513536 bytes read in 830 ms (19 MiB/s)
+17467904 bytes read in 859 ms (19.4 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-44764 bytes read in 453 ms (95.7 KiB/s)
+44914 bytes read in 453 ms (96.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
 1627787 bytes read in 495 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Using Device Tree in place at 0000000082000000, end 000000008200dedb
+   Using Device Tree in place at 0000000082000000, end 000000008200df71
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-217931-gd8a5b80 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 28 13:41:20 PST 2018
+Linux version 4.16.0-rc1-348826-g7928b2cbe55b (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Feb 11 15:41:38 PST 2018
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -143,7 +143,7 @@
 NUMA: Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
 NUMA: NODE_DATA [mem 0x13ffb6e00-0x13ffb88ff]
 Zone ranges:
-  DMA      [mem 0x0000000080000000-0x00000000ffffffff]
+  DMA32    [mem 0x0000000080000000-0x00000000ffffffff]
   Normal   [mem 0x0000000100000000-0x000000013fffffff]
 Movable zone start for each node
 Early memory node ranges
@@ -151,9 +151,9 @@
   node   0: [mem 0x0000000100000000-0x000000013fffffff]
 Initmem setup node 0 [mem 0x0000000080000000-0x000000013fffffff]
 On node 0 totalpages: 782848
-  DMA zone: 8192 pages used for memmap
-  DMA zone: 0 pages reserved
-  DMA zone: 520704 pages, LIFO batch:31
+  DMA32 zone: 8192 pages used for memmap
+  DMA32 zone: 0 pages reserved
+  DMA32 zone: 520704 pages, LIFO batch:31
   Normal zone: 4096 pages used for memmap
   Normal zone: 262144 pages, LIFO batch:31
 psci: probing for conduit method from DT.
@@ -161,8 +161,8 @@
 psci: Using standard PSCI v0.2 function IDs
 psci: MIGRATE_INFO_TYPE not supported.
 random: fast init done
-percpu: Embedded 23 pages/cpu @        (ptrval) s55168 r8192 d30848 u94208
-pcpu-alloc: s55168 r8192 d30848 u94208 alloc=23*4096
+percpu: Embedded 24 pages/cpu @        (ptrval) s57984 r8192 d32128 u98304
+pcpu-alloc: s57984 r8192 d32128 u98304 alloc=24*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
@@ -171,20 +171,7 @@
 Policy zone: Normal
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2982628K/3131392K available (9404K kernel code, 1150K rwdata, 4460K rodata, 1088K init, 395K bss, 132380K reserved, 16384K cma-reserved)
-Virtual kernel memory layout:
-    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
-    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
-      .text : 0x        (ptrval) - 0x        (ptrval)   (  9408 KB)
-    .rodata : 0x        (ptrval) - 0x        (ptrval)   (  4480 KB)
-      .init : 0x        (ptrval) - 0x        (ptrval)   (  1088 KB)
-      .data : 0x        (ptrval) - 0x        (ptrval)   (  1151 KB)
-       .bss : 0x        (ptrval) - 0x        (ptrval)   (   396 KB)
-    fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
-    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
-    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
-              0xffff7e0000000000 - 0xffff7e0003000000   (    48 MB actual)
-    memory  : 0xffff800000000000 - 0xffff8000c0000000   (  3072 MB)
+Memory: 2981668K/3131392K available (9980K kernel code, 1250K rwdata, 4628K rodata, 1152K init, 402K bss, 133340K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
@@ -207,7 +194,7 @@
 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
 Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
-ASID allocator initialised with 65536 entries
+ASID allocator initialised with 32768 entries
 Hierarchical SRCU implementation.
 Speedo Revision 4
 Tegra Revision: A01 SKU: 1 CPU Process: -22 SoC Process: -22
@@ -222,6 +209,7 @@
 smp: Brought up 1 node, 4 CPUs
 SMP: Total of 4 processors activated.
 CPU features: detected feature: 32-bit EL0 Support
+CPU features: detected feature: Kernel page table isolation (KPTI)
 CPU: All CPU(s) started at EL2
 alternatives: patching kernel code
 devtmpfs: initialized
@@ -231,13 +219,14 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.268:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.276:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 000000008f6f6647, 1 data @ 00000000560c3896)
+vdso: 2 pages (1 code @ 00000000fa501f60, 1 data @ 00000000d9a47250)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
 HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
+cryptd: max_cpu_qlen set to 1000
 ACPI: Interpreter disabled.
 vgaarb: loaded
 SCSI subsystem initialized
@@ -249,13 +238,13 @@
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
-dmi: Firmware registration failed.
 Advanced Linux Sound Architecture Driver Initialized.
 clocksource: Switched to clocksource arch_sys_counter
 VFS: Disk quotas dquot_6.6.0
 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
 pnp: PnP ACPI: disabled
 NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
 TCP established hash table entries: 32768 (order: 6, 262144 bytes)
 TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
 TCP: Hash tables configured (established 32768 bind 32768)
@@ -268,7 +257,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 8099f000
+kvm [1]: IDMAP page: 80a27000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
@@ -289,6 +278,7 @@
 io scheduler cfq registered (default)
 io scheduler mq-deadline registered
 io scheduler kyber registered
+EINJ: ACPI disabled.
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
@@ -304,9 +294,9 @@
 loop: module loaded
 libphy: Fixed MDIO Bus: probed
 tun: Universal TUN/TAP device driver, 1.6
-thunder-xcv, ver 1.0
-thunder-BGX, ver 1.0
-thunder-nic, ver 1.0
+thunder_xcv, ver 1.0
+thunder_bgx, ver 1.0
+nicpf, ver 1.0
 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
 e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
@@ -357,7 +347,7 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 1088K
+Freeing unused kernel memory: 1152K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-p2371-2180/tegra210-p2371-2180/defconfig%jetson-tx1_log.txt
Binary files /tmp/fooa and /tmp/foob differ
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2018-02-11 15:51:31.652461598 -0800
+++ /tmp/foob	2018-02-11 15:51:31.656461617 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-217931-gd8a5b80 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 28 13:41:20 PST 2018
+Linux version 4.16.0-rc1-348826-g7928b2cbe55b (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Feb 11 15:41:38 PST 2018
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -10,7 +10,7 @@
 NUMA: Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
 NUMA: NODE_DATA [mem 0x13fface80-0x13ffae97f]
 Zone ranges:
-  DMA      [mem 0x0000000080000000-0x00000000ffffffff]
+  DMA32    [mem 0x0000000080000000-0x00000000ffffffff]
   Normal   [mem 0x0000000100000000-0x000000013fffffff]
 Movable zone start for each node
 Early memory node ranges
@@ -21,7 +21,9 @@
 psci: PSCIv1.0 detected in firmware.
 psci: Using standard PSCI v0.2 function IDs
 psci: MIGRATE_INFO_UP_CPU reported invalid physical ID (0x80000000)
-percpu: Embedded 23 pages/cpu @        (ptrval) s55168 r8192 d30848 u94208
+psci: SMC Calling Convention v1.0
+random: get_random_bytes called from start_kernel+0xb0/0x414 with crng_init=0
+percpu: Embedded 24 pages/cpu @        (ptrval) s57984 r8192 d32128 u98304
 Detected PIPT I-cache on CPU0
 CPU features: enabling workaround for ARM erratum 832075
 CPU features: enabling workaround for ARM erratum 834220
@@ -29,20 +31,7 @@
 Policy zone: Normal
 Kernel command line: cros_secure vpr=0x08000000@0xf6800000 earlycon
 software IO TLB [mem 0xf1400000-0xf5400000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2835772K/2988032K available (9404K kernel code, 1150K rwdata, 4460K rodata, 1088K init, 395K bss, 135876K reserved, 16384K cma-reserved)
-Virtual kernel memory layout:
-    modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
-    vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
-      .text : 0x        (ptrval) - 0x        (ptrval)   (  9408 KB)
-    .rodata : 0x        (ptrval) - 0x        (ptrval)   (  4480 KB)
-      .init : 0x        (ptrval) - 0x        (ptrval)   (  1088 KB)
-      .data : 0x        (ptrval) - 0x        (ptrval)   (  1151 KB)
-       .bss : 0x        (ptrval) - 0x        (ptrval)   (   396 KB)
-    fixed   : 0xffff7dfffe7fb000 - 0xffff7dfffec00000   (  4116 KB)
-    PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
-    vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
-              0xffff7e0000000000 - 0xffff7e0003000000   (    48 MB actual)
-    memory  : 0xffff800000000000 - 0xffff8000c0000000   (  3072 MB)
+Memory: 2834812K/2988032K available (9980K kernel code, 1250K rwdata, 4628K rodata, 1152K init, 402K bss, 136836K reserved, 16384K cma-reserved)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Preemptible hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
@@ -81,7 +70,7 @@
 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
 Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
-ASID allocator initialised with 65536 entries
+ASID allocator initialised with 32768 entries
 Hierarchical SRCU implementation.
 Speedo Revision 4
 random: fast init done
@@ -97,6 +86,7 @@
 smp: Brought up 1 node, 4 CPUs
 SMP: Total of 4 processors activated.
 CPU features: detected feature: 32-bit EL0 Support
+CPU features: detected feature: Kernel page table isolation (KPTI)
 CPU: All CPU(s) started at EL2
 alternatives: patching kernel code
 devtmpfs: initialized
@@ -106,13 +96,14 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.184:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 000000008751d9fd, 1 data @ 00000000c8ba458a)
+vdso: 2 pages (1 code @ 000000000cebbbb1, 1 data @ 00000000dfd6c17e)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
 HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
+cryptd: max_cpu_qlen set to 1000
 ACPI: Interpreter disabled.
 PPLCD_VDD: Failed to request enable GPIO172: -517
 reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517
@@ -130,13 +121,13 @@
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
-dmi: Firmware registration failed.
 Advanced Linux Sound Architecture Driver Initialized.
 clocksource: Switched to clocksource arch_sys_counter
 VFS: Disk quotas dquot_6.6.0
 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
 pnp: PnP ACPI: disabled
 NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
 TCP established hash table entries: 32768 (order: 6, 262144 bytes)
 TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
 TCP: Hash tables configured (established 32768 bind 32768)
@@ -150,7 +141,7 @@
 Unpacking initramfs...
 Freeing initrd memory: 3412K
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 8099f000
+kvm [1]: IDMAP page: 80a27000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
@@ -172,6 +163,7 @@
 io scheduler mq-deadline registered
 io scheduler kyber registered
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
+EINJ: ACPI disabled.
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
@@ -203,9 +195,9 @@
 max77620-ldo8: supplied by regulator-dummy
 libphy: Fixed MDIO Bus: probed
 tun: Universal TUN/TAP device driver, 1.6
-thunder-xcv, ver 1.0
-thunder-BGX, ver 1.0
-thunder-nic, ver 1.0
+thunder_xcv, ver 1.0
+thunder_bgx, ver 1.0
+nicpf, ver 1.0
 e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
 e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
@@ -240,7 +232,7 @@
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 i2c /dev entries driver
-(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
+(NULL device *): hwmon: 'bq27742-0' is not a valid name attribute, please fix
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 Synopsys Designware Multimedia Card Interface Driver
@@ -263,9 +255,10 @@
 mmcblk0boot0: mmc0:0001 BGND3R partition 1 4.00 MiB
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB, chardev (240:0)
+max77686-rtc max77620-rtc: setting system clock to 2001-11-23 05:10:52 UTC (1006492252)
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
-max77686-rtc max77620-rtc: setting system clock to 2001-11-09 03:07:10 UTC (1005275230)
 PP1200_AVDD: disabling
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
 PP2800L_FCAM: disabling
@@ -275,8 +268,7 @@
 PP1800_CAM: disabling
 ALSA device list:
   No soundcards found.
-tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
-Freeing unused kernel memory: 1088K
+Freeing unused kernel memory: 1152K
 
 System initialization...
 
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-02-11 15:51:31.672461691 -0800
+++ /tmp/foob	2018-02-11 15:51:31.672461691 -0800
@@ -39,10 +39,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##############################
-	 2.7 MiB/s
+	 ####################################
+	 2.9 MiB/s
 done
-Bytes transferred = 8065536 (7b1200 hex)
+Bytes transferred = 8159744 (7c8200 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -53,7 +53,7 @@
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x7b1200 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x7c8200 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-336172-gd8a5b80568a9 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 28 13:34:20 PST 2018
+Linux version 4.16.0-rc1-348826-g7928b2cbe55b (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Feb 11 15:35:47 PST 2018
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -76,14 +76,14 @@
   DMA zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
 random: fast init done
-percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632
-pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096
+percpu: Embedded 17 pages/cpu @(ptrval) s39232 r8192 d22208 u69632
+pcpu-alloc: s39232 r8192 d22208 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1992476K/2096128K available (11264K kernel code, 1602K rwdata, 4296K rodata, 2048K init, 404K bss, 38116K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1992508K/2096128K available (11264K kernel code, 1570K rwdata, 4348K rodata, 2048K init, 405K bss, 38084K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -93,8 +93,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (12256 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   (1603 kB)
-       .bss : 0x(ptrval) - 0x(ptrval)   ( 405 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   (1571 kB)
+       .bss : 0x(ptrval) - 0x(ptrval)   ( 406 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU event tracing is enabled.
@@ -145,61 +145,8 @@
 hw-breakpoint: maximum watchpoint size is 4 bytes.
 Serial: AMBA PL011 UART driver
 tegra-mc 7000f000.memory-controller: no memory timings for RAM code 3 registered
-iommu: Adding device reg-dummy to group 0
-iommu: Adding device 3000.pcie to group 1
-iommu: Adding device 50000000.host1x to group 2
-iommu: Adding device 54040000.mpe to group 3
-iommu: Adding device 54080000.vi to group 4
-iommu: Adding device 540c0000.epp to group 5
-iommu: Adding device 54100000.isp to group 6
-iommu: Adding device 54140000.gr2d to group 7
-iommu: Adding device 54180000.gr3d to group 8
-iommu: Adding device 54200000.dc to group 9
-iommu: Adding device 54240000.dc to group 10
-iommu: Adding device 54280000.hdmi to group 11
-iommu: Adding device 50040600.timer to group 12
-iommu: Adding device 50043000.cache-controller to group 13
-iommu: Adding device 60005000.timer to group 14
-iommu: Adding device 60007000.flow-controller to group 15
-iommu: Adding device 6000a000.dma to group 16
-iommu: Adding device 6000c000.ahb to group 17
-iommu: Adding device 6000d000.gpio to group 18
-iommu: Adding device 70000800.apbmisc to group 19
-iommu: Adding device 70000868.pinmux to group 20
-iommu: Adding device 70006000.serial to group 21
-iommu: Adding device 7000e000.rtc to group 22
-iommu: Adding device 7000c000.i2c to group 23
-iommu: Adding device 7000c400.i2c to group 24
-iommu: Adding device 7000c500.i2c to group 25
-iommu: Adding device 7000c700.i2c to group 26
-iommu: Adding device 7000d000.i2c to group 27
-iommu: Adding device 7000da00.spi to group 28
-iommu: Adding device 7000e400.pmc to group 29
-iommu: Adding device 7000f000.memory-controller to group 30
-iommu: Adding device 7000f800.fuse to group 31
-iommu: Adding device 70080000.ahub to group 32
-iommu: Adding device 78000000.sdhci to group 33
-iommu: Adding device 78000600.sdhci to group 34
-iommu: Adding device 7d000000.usb to group 35
-iommu: Adding device 7d000000.usb-phy to group 36
-iommu: Adding device 7d004000.usb to group 37
-iommu: Adding device 7d004000.usb-phy to group 38
-iommu: Adding device 7d008000.usb to group 39
-iommu: Adding device 7d008000.usb-phy to group 40
-iommu: Adding device pmu to group 41
-iommu: Adding device clocks to group 42
-iommu: Adding device gpio-leds to group 43
-iommu: Adding device regulators to group 44
-iommu: Adding device regulators:regulator@0 to group 45
-iommu: Adding device regulators:regulator@1 to group 46
-iommu: Adding device regulators:regulator@2 to group 47
-iommu: Adding device regulators:regulator@3 to group 48
-iommu: Adding device regulators:regulator@4 to group 49
-iommu: Adding device regulators:regulator@5 to group 50
-iommu: Adding device regulators:regulator@6 to group 51
-iommu: Adding device regulators:regulator@7 to group 52
-iommu: Adding device regulators:regulator@8 to group 53
-iommu: Adding device sound to group 54
+iommu: Adding device 54200000.dc to group 0
+iommu: Adding device 54240000.dc to group 0
 AT91: Could not find identification node
 vdd_5v_sata: Failed to request enable GPIO30: -517
 reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
@@ -215,8 +162,6 @@
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
-iommu: Adding device tps65910-gpio to group 55
-iommu: Adding device tps65910-pmic to group 56
 vrtc: supplied by vdd_5v_in
 vio: supplied by vdd_5v_in
 vdd1: supplied by vdd_5v_in
@@ -232,15 +177,13 @@
 avdd_dsi_csi,pwrdet_mipi: Bringing 1000000uV into 1200000-1200000uV
 ldo7: supplied by vdd_1v8_gen
 ldo8: supplied by vdd_1v8_gen
-iommu: Adding device tps65910-rtc to group 57
-iommu: Adding device tps65910-power to group 58
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
-dmi: Firmware registration failed.
 clocksource: Switched to clocksource timer_us
 NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
@@ -254,7 +197,6 @@
 PCI: CLS 0 bytes, default 64
 hw perfevents: no interrupt-affinity property for /pmu, guessing.
 hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
-iommu: Adding device alarmtimer to group 59
 Initialise system trusted keyrings
 workingset: timestamp_bits=30 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
@@ -265,7 +207,7 @@
 Key type asymmetric registered
 Asymmetric key parser 'x509' registered
 bounce: pool size: 64 pages
-Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
 io scheduler noop registered
 io scheduler deadline registered
 io scheduler cfq registered (default)
@@ -291,18 +233,18 @@
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-iommu: Adding device serial8250 to group 60
 console [ttyS0] disabled
 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
 SuperH (H)SCI(F) driver initialized
 msm_serial: driver initialized
 STMicroelectronics ASC driver initialized
+Failed to attached device 54200000.dc to IOMMU_mapping
+Failed to attached device 54240000.dc to IOMMU_mapping
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 brd: module loaded
 loop: module loaded
 m25p80 spi0.1: w25q32 (4096 Kbytes)
-iommu: Adding device Fixed MDIO bus.0 to group 61
 libphy: Fixed MDIO Bus: probed
 CAN device driver interface
 bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
@@ -338,7 +280,6 @@
 ohci-st: OHCI STMicroelectronics driver
 ohci-atmel: OHCI Atmel driver
 usbcore: registered new interface driver usb-storage
-iommu: Adding device ci_hdrc.0 to group 62
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
@@ -366,27 +307,27 @@
 can: broadcast manager protocol (rev 20170425 t)
 can: netlink gateway (rev 20170425) max_hops=1
 Key type dns_resolver registered
+mmc1: new high speed MMC card at address 0001
 ThumbEE CPU extension supported.
+mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
 Registering SWP/SWPB emulation handler
+mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
 Loading compiled-in X.509 certificates
+mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
+mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB, chardev (236:0)
+Primary GPT is invalid, using alternate GPT.
+ mmcblk1: p1 p2 p3 p4 p5
 vdd_ddr: supplied by vdd_5v_in
 vdd_5v_sata: supplied by vdd_5v_in
 usb1_vbus: supplied by vdd_5v_in
 usb3_vbus: supplied by vdd_5v_in
+mmc0: new ultra high speed DDR50 SDHC card at address aaaa
+mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
 +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
-mmc1: new high speed MMC card at address 0001
-mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
-mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
-mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
-mmc0: new ultra high speed DDR50 SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
-mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB, chardev (237:0)
-Primary GPT is invalid, using alternate GPT.
- mmcblk1: p1 p2 p3 p4 p5
- mmcblk0: p1 p2 p3
 tegra-pcie 3000.pcie: 2x3 configuration
+ mmcblk0: p1 p2 p3
 tegra-pcie 3000.pcie: probing port 0, using 2 lanes
 tegra-pcie 3000.pcie: probing port 2, using 2 lanes
 tegra-pcie 3000.pcie: link 2 down, retrying
@@ -417,6 +358,8 @@
 pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
 pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
 pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:01:00.0: supports D1 D2
+pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
 PCI: bus1: Fast back to back transfers disabled
 pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
 pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref]
@@ -432,8 +375,7 @@
 pcieport 0000:00:01.0: Signaling PME with IRQ 375
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x1a4f2ac8, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x5a42a840, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -464,4 +406,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.484039] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.134079] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2018-02-11 15:51:31.692461784 -0800
+++ /tmp/foob	2018-02-11 15:51:31.696461802 -0800
@@ -37,10 +37,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###############################
-	 2.9 MiB/s
+	 ##################################
+	 3 MiB/s
 done
-Bytes transferred = 6171744 (5e2c60 hex)
+Bytes transferred = 6216816 (5edc70 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -51,7 +51,7 @@
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5e2c60 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5edc70 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-16223-gd8a5b80 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 28 13:33:14 PST 2018
+Linux version 4.16.0-rc1-28877-g7928b2c (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Feb 11 15:34:51 PST 2018
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -73,14 +73,14 @@
   Normal zone: 196608 pages, LIFO batch:31
   HighMem zone: 327424 pages, LIFO batch:31
 random: fast init done
-percpu: Embedded 17 pages/cpu @(ptrval) s39168 r8192 d22272 u69632
-pcpu-alloc: s39168 r8192 d22272 u69632 alloc=17*4096
+percpu: Embedded 17 pages/cpu @(ptrval) s39296 r8192 d22144 u69632
+pcpu-alloc: s39296 r8192 d22144 u69632 alloc=17*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists, mobility grouping on.  Total pages: 522496
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998528K/2096128K available (9216K kernel code, 778K rwdata, 2560K rodata, 1024K init, 299K bss, 32064K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998524K/2096128K available (9216K kernel code, 783K rwdata, 2584K rodata, 1024K init, 298K bss, 32068K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -90,8 +90,8 @@
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
-      .data : 0x(ptrval) - 0x(ptrval)   ( 779 kB)
-       .bss : 0x(ptrval) - 0x(ptrval)   ( 300 kB)
+      .data : 0x(ptrval) - 0x(ptrval)   ( 784 kB)
+       .bss : 0x(ptrval) - 0x(ptrval)   ( 299 kB)
 Preemptible hierarchical RCU implementation.
 	Tasks RCU enabled.
 NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
@@ -136,61 +136,8 @@
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 4 bytes.
 tegra-mc 7000f000.memory-controller: no memory timings for RAM code 3 registered
-iommu: Adding device reg-dummy to group 0
-iommu: Adding device 3000.pcie to group 1
-iommu: Adding device 50000000.host1x to group 2
-iommu: Adding device 54040000.mpe to group 3
-iommu: Adding device 54080000.vi to group 4
-iommu: Adding device 540c0000.epp to group 5
-iommu: Adding device 54100000.isp to group 6
-iommu: Adding device 54140000.gr2d to group 7
-iommu: Adding device 54180000.gr3d to group 8
-iommu: Adding device 54200000.dc to group 9
-iommu: Adding device 54240000.dc to group 10
-iommu: Adding device 54280000.hdmi to group 11
-iommu: Adding device 50040600.timer to group 12
-iommu: Adding device 50043000.cache-controller to group 13
-iommu: Adding device 60005000.timer to group 14
-iommu: Adding device 60007000.flow-controller to group 15
-iommu: Adding device 6000a000.dma to group 16
-iommu: Adding device 6000c000.ahb to group 17
-iommu: Adding device 6000d000.gpio to group 18
-iommu: Adding device 70000800.apbmisc to group 19
-iommu: Adding device 70000868.pinmux to group 20
-iommu: Adding device 70006000.serial to group 21
-iommu: Adding device 7000e000.rtc to group 22
-iommu: Adding device 7000c000.i2c to group 23
-iommu: Adding device 7000c400.i2c to group 24
-iommu: Adding device 7000c500.i2c to group 25
-iommu: Adding device 7000c700.i2c to group 26
-iommu: Adding device 7000d000.i2c to group 27
-iommu: Adding device 7000da00.spi to group 28
-iommu: Adding device 7000e400.pmc to group 29
-iommu: Adding device 7000f000.memory-controller to group 30
-iommu: Adding device 7000f800.fuse to group 31
-iommu: Adding device 70080000.ahub to group 32
-iommu: Adding device 78000000.sdhci to group 33
-iommu: Adding device 78000600.sdhci to group 34
-iommu: Adding device 7d000000.usb to group 35
-iommu: Adding device 7d000000.usb-phy to group 36
-iommu: Adding device 7d004000.usb to group 37
-iommu: Adding device 7d004000.usb-phy to group 38
-iommu: Adding device 7d008000.usb to group 39
-iommu: Adding device 7d008000.usb-phy to group 40
-iommu: Adding device pmu to group 41
-iommu: Adding device clocks to group 42
-iommu: Adding device gpio-leds to group 43
-iommu: Adding device regulators to group 44
-iommu: Adding device regulators:regulator@0 to group 45
-iommu: Adding device regulators:regulator@1 to group 46
-iommu: Adding device regulators:regulator@2 to group 47
-iommu: Adding device regulators:regulator@3 to group 48
-iommu: Adding device regulators:regulator@4 to group 49
-iommu: Adding device regulators:regulator@5 to group 50
-iommu: Adding device regulators:regulator@6 to group 51
-iommu: Adding device regulators:regulator@7 to group 52
-iommu: Adding device regulators:regulator@8 to group 53
-iommu: Adding device sound to group 54
+iommu: Adding device 54200000.dc to group 0
+iommu: Adding device 54240000.dc to group 0
 vdd_5v_sata: Failed to request enable GPIO30: -517
 reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
 usb1_vbus: Failed to request enable GPIO238: -517
@@ -205,8 +152,6 @@
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
-iommu: Adding device tps65910-gpio to group 55
-iommu: Adding device tps65910-pmic to group 56
 vrtc: supplied by vdd_5v_in
 vio: supplied by vdd_5v_in
 vdd1: supplied by vdd_5v_in
@@ -222,8 +167,6 @@
 avdd_dsi_csi,pwrdet_mipi: Bringing 1000000uV into 1200000-1200000uV
 ldo7: supplied by vdd_1v8_gen
 ldo8: supplied by vdd_1v8_gen
-iommu: Adding device tps65910-rtc to group 57
-iommu: Adding device tps65910-power to group 58
 Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
@@ -237,6 +180,7 @@
 Bluetooth: SCO socket layer initialized
 clocksource: Switched to clocksource timer_us
 NET: Registered protocol family 2
+tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
@@ -247,11 +191,9 @@
 RPC: Registered udp transport module.
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
-iommu: Adding device regulatory.0 to group 59
 PCI: CLS 0 bytes, default 64
 hw perfevents: no interrupt-affinity property for /pmu, guessing.
 hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
-iommu: Adding device alarmtimer to group 60
 Initialise system trusted keyrings
 workingset: timestamp_bits=30 max_order=19 bucket_order=0
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
@@ -284,7 +226,6 @@
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-iommu: Adding device serial8250 to group 61
 console [ttyS0] disabled
 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
@@ -294,7 +235,6 @@
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 loop: module loaded
 m25p80 spi0.1: w25q32 (4096 Kbytes)
-iommu: Adding device Fixed MDIO bus.0 to group 62
 libphy: Fixed MDIO Bus: probed
 CAN device driver interface
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
@@ -318,7 +258,6 @@
 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 usbcore: registered new interface driver cdc_wdm
 usbcore: registered new interface driver usb-storage
-iommu: Adding device ci_hdrc.0 to group 63
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
@@ -338,7 +277,6 @@
 mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-iommu: Adding device snd-soc-dummy to group 64
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM16G 14.8 GiB 
 mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
@@ -349,7 +287,6 @@
 mmc0: new ultra high speed DDR50 SDHC card at address aaaa
 mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
  mmcblk0: p1 p2 p3
-iommu: Adding device 70080400.i2s to group 65
 tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
 tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
 input: NVIDIA Tegra Beaver Headphones as /devices/soc0/sound/sound/card0/input0
@@ -411,6 +348,8 @@
 pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
 pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
 pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:01:00.0: supports D1 D2
+pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
 PCI: bus1: Fast back to back transfers disabled
 pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
 pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref]
@@ -426,8 +365,7 @@
 pcieport 0000:00:01.0: Signaling PME with IRQ 375
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x12d3c471, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x50b5bf0b, 02:04:4b:01:60:a6, XID 0c900800 IRQ 376
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -451,10 +389,10 @@
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
 vdd_sata,avdd_plle: disabling
+cfg80211: failed to load regulatory.db
 usb1_vbus: disabling
 ALSA device list:
   #0: NVIDIA Tegra Beaver
-cfg80211: failed to load regulatory.db
 EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk1p1): warning: mounting fs with errors, running e2fsck is recommended
 EXT4-fs (mmcblk1p1): recovery complete
@@ -462,7 +400,6 @@
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
-usb 2-1: new high-speed USB device number 2 using tegra-ehci
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    5.398436] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
+root@(none):/# [    4.378642] usb 2-1: new high-speed USB device number 2 using tegra-ehci
