Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.094037465 -0800
+++ /tmp/foob	2018-01-21 18:20:33.094037465 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd070]
-Linux version 4.15.0-rc8-335804-ga8750ddca918 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 14 16:40:42 PST 2018
+Linux version 4.15.0-rc9-336067-g0c5b9b5d9adb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 21 18:10:42 PST 2018
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -77,7 +77,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.188:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000c6f50371, 1 data @ 00000000551d90a4)
+vdso: 2 pages (1 code @ 000000006062fda8, 1 data @ 0000000068623567)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -183,7 +183,7 @@
 registered taskstats version 1
 Loading compiled-in X.509 certificates
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2018-01-15 00:47:39 UTC (1515977259)
+rtc-pl031 9010000.pl031: setting system clock to 2018-01-22 02:17:39 UTC (1516587459)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.138037668 -0800
+++ /tmp/foob	2018-01-21 18:20:33.138037668 -0800
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ##############################
-	 2.8 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 8065536 (7b1200 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-335804-ga8750ddca918 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 14 16:34:20 PST 2018
+Linux version 4.15.0-rc9-336067-g0c5b9b5d9adb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 21 18:04:31 PST 2018
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -372,11 +372,11 @@
 Loading compiled-in X.509 certificates
 mmc0: new high speed SDHC card at address aaaa
 usb1_vbus: supplied by vdd-sys-5v0
-usb2_vbus: supplied by vdd-sys-5v0
 mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
+usb2_vbus: supplied by vdd-sys-5v0
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
- mmcblk0: p1 p2 p3
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+ mmcblk0: p1 p2 p3
 [drm] No driver support for vblank timestamp query.
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
@@ -394,7 +394,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-07 07:39:29 UTC (960363569)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-14 09:08:33 UTC (960973713)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -406,4 +406,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+root@(none):/# [    2.929174] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:b5:16
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.162037778 -0800
+++ /tmp/foob	2018-01-21 18:20:33.162037778 -0800
@@ -38,20 +38,20 @@
 	 #################################################################
 	 #################################################################
 	 ###############################
-	 3.1 MiB/s
+	 2.8 MiB/s
 done
-Bytes transferred = 6168192 (5e1e80 hex)
+Bytes transferred = 6169624 (5e2418 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.5 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5e1e80 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5e2418 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-15855-ga8750dd (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 14 16:32:59 PST 2018
+Linux version 4.15.0-rc9-16118-g0c5b9b5 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 21 18:02:59 PST 2018
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -388,7 +388,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-07 07:36:43 UTC (960363403)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-14 09:05:51 UTC (960973551)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
@@ -406,4 +406,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.181546] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.181222] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.170037814 -0800
+++ /tmp/foob	2018-01-21 18:20:33.174037833 -0800
@@ -35,7 +35,7 @@
 	 #################################################################
 	 #################################################################
 	 ##############################
-	 4 MiB/s
+	 3.8 MiB/s
 done
 Bytes transferred = 8065536 (7b1200 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-335804-ga8750ddca918 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 14 16:34:20 PST 2018
+Linux version 4.15.0-rc9-336067-g0c5b9b5d9adb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 21 18:04:31 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -393,12 +393,12 @@
 +5V_HDMI_CON: supplied by +5V_SYS
 +5V_SATA: supplied by +5V_SYS
 +12V_SATA: supplied by +VDD_MUX
-mmc0: new high speed MMC card at address 0001
  usb2-0: usb2-0 supply vbus not found, using dummy regulator
  usb2-1: usb2-1 supply vbus not found, using dummy regulator
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
 tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517
+mmc0: new high speed MMC card at address 0001
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
 as3722-sd2: supplied by +5V_SYS
@@ -499,7 +499,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
 r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x30185647, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x3ca377ad, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -510,7 +510,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:10 UTC (946685050)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:43 UTC (946685083)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
@@ -519,8 +519,8 @@
 +3.3V_RUN_TOUCH: disabling
 +2.8V_RUN_CAM_AF: disabling
 +1.8V_RUN_VPP_FUSE: disabling
-tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
 ata1: SATA link down (SStatus 0 SControl 300)
+tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
 mmc1: new high speed SDHC card at address aaaa
 mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
  mmcblk1: p1 p2 p3
@@ -534,8 +534,8 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:17.
 devtmpfs: mounted
-Console: switching to colour frame buffer device 512x135
 Freeing unused kernel memory: 2048K
+Console: switching to colour frame buffer device 512x135
 drm drm: fb0:  frame buffer device
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.182037869 -0800
+++ /tmp/foob	2018-01-21 18:20:33.182037869 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -33,20 +33,20 @@
 	 #################################################################
 	 #################################################################
 	 ###############################
-	 3.9 MiB/s
+	 4 MiB/s
 done
-Bytes transferred = 6168192 (5e1e80 hex)
+Bytes transferred = 6169624 (5e2418 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 4 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5e1e80 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5e2418 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-15855-ga8750dd (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 14 16:32:59 PST 2018
+Linux version 4.15.0-rc9-16118-g0c5b9b5 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 21 18:02:59 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -455,8 +455,8 @@
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits
 pci 0000:00:01.0: enabling Extended Tags
-pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits
 ata1: SATA link down (SStatus 0 SControl 300)
+pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits
 pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
@@ -479,12 +479,12 @@
 pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
 pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
-mmc1: new high speed SDHC card at address aaaa
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
 pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff]
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
 pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
 pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit]
@@ -499,15 +499,15 @@
 pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
 pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
 pcieport 0000:00:01.0: enabling device (0140 -> 0142)
- mmcblk1: p1 p2 p3
 pcieport 0000:00:01.0: Signaling PME with IRQ 395
 pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
+ mmcblk1: p1 p2 p3
 pcieport 0000:00:02.0: enabling device (0140 -> 0143)
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
 r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xbf6f4a47, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x26d9fea8, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -524,7 +524,6 @@
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
-cfg80211: failed to load regulatory.db
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
@@ -536,6 +535,7 @@
 ALSA device list:
   #0: tegra-hda at 0x70038000 irq 346
   #1: NVIDIA Tegra Jetson TK1
+cfg80211: failed to load regulatory.db
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.190037906 -0800
+++ /tmp/foob	2018-01-21 18:20:33.194037925 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -33,9 +33,9 @@
 	 #################################################################
 	 #################################################################
 	 ##########################################
-	 4 MiB/s
+	 3.4 MiB/s
 done
-Bytes transferred = 6334792 (60a948 hex)
+Bytes transferred = 6335480 (60abf8 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -46,7 +46,7 @@
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x60a948 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x60abf8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-217563-ga8750dd (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 14 16:33:40 PST 2018
+Linux version 4.15.0-rc9-217826-g0c5b9b5 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 21 18:04:32 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -451,8 +451,8 @@
 mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie: probing port 0, using 2 lanes
-tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008
 ata1: SATA link down (SStatus 0 SControl 300)
+tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008
 tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
 tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000
 tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
@@ -486,11 +486,11 @@
 pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
 pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
 pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
-mmc1: new high speed SDHC card at address aaaa
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
 pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff]
 pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
@@ -506,16 +506,16 @@
 pci 0000:00:02.0:   bridge window [mem 0x13100000-0x131fffff]
 pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
 pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
+ mmcblk1: p1 p2 p3
 pcieport 0000:00:01.0: enabling device (0140 -> 0142)
 pcieport 0000:00:01.0: Signaling PME with IRQ 395
- mmcblk1: p1 p2 p3
 pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
 pcieport 0000:00:02.0: enabling device (0140 -> 0143)
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
 r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xeb1b046f, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xbbcc3b47, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -528,7 +528,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:57 UTC (946684917)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:28 UTC (946684948)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.210037998 -0800
+++ /tmp/foob	2018-01-21 18:20:33.214038017 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -43,7 +43,7 @@
 	 #################################################################
 	 #################################################################
 	 ##############################
-	 3 MiB/s
+	 3.3 MiB/s
 done
 Bytes transferred = 8065536 (7b1200 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
@@ -52,7 +52,7 @@
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 2.7 MiB/s
+	 3.6 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-335804-ga8750ddca918 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 14 16:34:20 PST 2018
+Linux version 4.15.0-rc9-336067-g0c5b9b5d9adb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 21 18:04:31 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -386,6 +386,7 @@
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 +3.3V_RUN: supplied by +3.3V_SYS
 +VDD_LED: supplied by +VDD_MUX
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
@@ -396,17 +397,8 @@
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
 +3.3V_PANEL: supplied by +3.3V_RUN
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (237:0)
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
-elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
-input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 +3.3V_LP0: supplied by +3.3V_SYS
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
-elan_i2c 1-0015: failed to read report data: -121
 +5V_HDMI_CON: supplied by +5V_SYS
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
  usb3-1: usb3-1 supply vbus not found, using dummy regulator
@@ -416,14 +408,20 @@
 mmc1: Unknown controller version (3). You may experience problems.
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: Switching to 3.3V signalling voltage failed
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (237:0)
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
-elan_i2c 1-0015: invalid report id data (ff)
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
 mmc2: Invalid maximum block size, assuming 512 bytes
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 mmc2: new high speed SDHC card at address 0007
@@ -438,7 +436,7 @@
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824)
 +1.8V_RUN_CAM: disabling
 +3.3V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.230038090 -0800
+++ /tmp/foob	2018-01-21 18:20:33.234038109 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -43,18 +43,18 @@
 	 ###############################
 	 3.4 MiB/s
 done
-Bytes transferred = 6168192 (5e1e80 hex)
+Bytes transferred = 6169624 (5e2418 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 2.9 MiB/s
+	 3.2 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5e1e80 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5e2418 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-15855-ga8750dd (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 14 16:32:59 PST 2018
+Linux version 4.15.0-rc9-16118-g0c5b9b5 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 21 18:02:59 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -368,12 +368,10 @@
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1
 mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0)
+input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1
 input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2
 NET: Registered protocol family 10
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 Segment Routing with IPv6
 mip6: Mobile IPv6
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
@@ -423,8 +421,10 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
 mmc2: Invalid maximum block size, assuming 512 bytes
-mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0)
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+mmc1: new high speed SDIO card at address 0001
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 mmc2: new high speed SDHC card at address 0007
@@ -436,11 +436,10 @@
 GPT: Use GNU Parted to correct GPT errors.
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 Console: switching to colour frame buffer device 170x48
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
-input: gpio-keys as /devices/soc0/gpio-keys/input/input4
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
+input: gpio-keys as /devices/soc0/gpio-keys/input/input3
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
@@ -455,8 +454,8 @@
 +5V_USB_HS: disabling
 +5V_USB_SS: disabling
 ALSA device list:
-  #0: tegra-hda at 0x70038000 irq 343
   #1: GoogleNyanBig
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input4
 EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
 EXT4-fs (mmcblk0p3): recovery complete
 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.254038200 -0800
+++ /tmp/foob	2018-01-21 18:20:33.258038219 -0800
@@ -41,20 +41,20 @@
 	 #################################################################
 	 #################################################################
 	 ##########################################
-	 2.8 MiB/s
+	 3.4 MiB/s
 done
-Bytes transferred = 6334792 (60a948 hex)
+Bytes transferred = 6335480 (60abf8 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.6 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x60a948 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x60abf8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-217563-ga8750dd (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 14 16:33:40 PST 2018
+Linux version 4.15.0-rc9-217826-g0c5b9b5 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 21 18:04:32 PST 2018
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -449,7 +449,7 @@
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 input: gpio-keys as /devices/soc0/gpio-keys/input/input4
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
@@ -472,7 +472,7 @@
 VFS: Mounted root (ext4 filesystem) on device 179:3.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
-usb 1-3: new high-speed USB device number 3 using tegra-xusb
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.134283] asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65
+root@(none):/# [    3.474500] usb 1-3: new high-speed USB device number 3 using tegra-xusb
+asix 1-3:1.0 eth0: register 'asix' at usb-70090000.usb-3, ASIX AX88772 USB 2.0 Ethernet, c8:d7:19:90:fa:65
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.266038256 -0800
+++ /tmp/foob	2018-01-21 18:20:33.270038274 -0800
@@ -32,7 +32,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801449 us
+Bootloader-Cpu Init at (time stamp): 1802124 us
 
 Pinmux changes applied in kernel way
 
@@ -63,22 +63,22 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801423  us
-Bootloader (AosInit) time: 733464 us
-Bootloader Main Init time: 180093 us
-BlockDevMgrInit time: 157540 us
+Miscellaneous avp time: 1802098  us
+Bootloader (AosInit) time: 734226 us
+Bootloader Main Init time: 188230 us
+BlockDevMgrInit time: 157529 us
 PartMgrInit time: 8 us
 StorMgrInit time: 30 us
 FsMgrInit time: 2 us
-Partition Table load: 76999 us 
-Display init time: 574604 us
+Partition Table load: 77083 us 
+Display init time: 574679 us
 Kernel read time: 1510 msec
 Load Kernel Size:   20013056 Bytes
 Bl Kernel ReadSpeed: 13253000 Bytes/sec
-Pre-Kernel Jump time: 4245314 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 9375443 us
+Pre-Kernel Jump time: 4245346 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 9383266 us
 Booting Linux on physical CPU 0x0000000000 [0x4e0f0000]
-Linux version 4.15.0-rc8-335804-ga8750ddca918 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 14 16:40:42 PST 2018
+Linux version 4.15.0-rc9-336067-g0c5b9b5d9adb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 21 18:10:42 PST 2018
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
 efi: Getting EFI parameters from FDT:
@@ -149,9 +149,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.132:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.128:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000e003ef9f, 1 data @ 00000000a599fe8c)
+vdso: 2 pages (1 code @ 000000003008d74d, 1 data @ 00000000b3148270)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -267,26 +267,25 @@
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
 mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 NET: Registered protocol family 17
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (240:0)
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
 9pnet: Installing 9P2000 support
 Key type dns_resolver registered
 registered taskstats version 1
 Loading compiled-in X.509 certificates
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (240:0)
 +VDD_LED: supplied by +VDD_MUX
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
 +5V_HDMI_CON: supplied by +5V_SYS
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-hctosys: unable to open rtc device (rtc0)
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
+hctosys: unable to open rtc device (rtc0)
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +VDD_LED: disabling
 +5V_USB_HS: disabling
@@ -295,6 +294,7 @@
 +5V_HDMI_CON: disabling
 ALSA device list:
   No soundcards found.
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
 Freeing unused kernel memory: 1088K
 
 System initialization...
Diff for ./tegra186-p2771-0000/tegra186-p2771-0000/defconfig%jetson-tx2_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.290038367 -0800
+++ /tmp/foob	2018-01-21 18:20:33.298038403 -0800
@@ -2,14 +2,14 @@
 
 Pass: Linux Boot Test 1
 	Test Owner(s): N/A
-	Execution Time 56.49 sec
+	Execution Time 56.55 sec
 	Percent passed so far: 50.0
 	
 
 
 Pass: Linux Boot Test 2
 	Test Owner(s): N/A
-	Execution Time 56.0 sec
+	Execution Time 55.98 sec
 	Percent passed so far: 100.0
 	
 
@@ -31,8 +31,8 @@
 I> Supported mb1-bct versions 9-12
 I> Version of mb1 bct binary 12
 W> MB1 BCT does not have controller prod config data
-I> Bootrom patch version : 7 (correctly patched)
-I> ATE fuse revision : 0x1001c
+I> Bootrom patch version : 31 (correctly patched)
+I> ATE fuse revision : 0xa0
 I> chip revision : A02P
 I> disabled_core_mask: 0xffffff0c
 I> Enabled Cores: 0xf3
@@ -97,8 +97,8 @@
 I> Loading preboot
 I> Binary(1) of size 59024 is loaded @ 0x40000000
 I> Restrict GSC#29 access to DPMU only
-I> Updated LSR_DVCOMP_PARAMS: 0xc0801005c
-I> Updated LSR_DVCOMP_PARAMS: 0xc07a0f45c
+I> Updated LSR_DVCOMP_PARAMS: 0xc0780f05c
+I> Updated LSR_DVCOMP_PARAMS: 0xc0780f05c
 I> WP0 triggered
 I> Waypoint-0 ACK received :)
 I> WP0.5 triggered
@@ -269,7 +269,7 @@
 I> Total write size is 512 bytes
 I> Write successful.
 I> Writing APP partition
-I> Total write size is 27608268 bytes
+I> Total write size is 27604172 bytes
 I> Write successful.
 I> Writing mts-bootpack partition
 I> Total write size is 2077344 bytes
@@ -481,24 +481,20 @@
 I> Device at /i2c@c250000:0x57
 I> Find /i2c@c240000's alias i2c1
 I> Reading eeprom i2c=1 address=0x51
-I> Device at /i2c@c240000:0x51
+I> Eeprom read failed 0x1a800027
 I> Find /i2c@3160000's alias i2c0
 I> Reading eeprom i2c=0 address=0x50
-I> Device at /i2c@3160000:0x50
+I> Eeprom read failed 0x1a800027
 I> Find /i2c@3180000's alias i2c2
 I> Reading eeprom i2c=2 address=0x54
 I> Enabling gpio chip_id = 2, gpio pin = 9
 I> Disabling gpio chip_id = 2, gpio pin = 9
 I> Device at /i2c@3180000:0x54
-I> create_pm_ids: id: 3310-1000-B00-A, len: 15
+I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-302-C, len: 15
+I> create_pm_ids: id: 2597-0000-501-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3320-1000-100-C, len: 15
-I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
-I> create_pm_ids: id: 2614-0000-100-G, len: 15
-I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3326-1000-000-L, len: 15
+I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
 initializing target

 calling apps_init()

@@ -519,52 +515,42 @@
 I> Kernel DTB @ 0x92000000
 I> Verified boot state = Orange
 E> tegrabl_display_clear: display is not initialized
-I> Checking boot.img header magic ... [0001.854] I> [OK]
+I> Checking boot.img header magic ... [0001.775] I> [OK]
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
-I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.871] I> Done
-I> Move ramdisk (len: 6265169) from 0xa8072800 to 0x98000000
+I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.792] I> Done
+I> Move ramdisk (len: 6265292) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f9951
+I> Ramdisk: Base: 0x98000000; Size: 0x5f99cc
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0334916010149
+I> add_serialno: Serial Num = 0321217203834
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2525/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0334916010149 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl11215/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0321217203834 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:80:e5:8d
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:80:e5:8e
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:80:e5:8f
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:93:c8
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:93:c9
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:93:ca
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
-I> create_pm_ids: id: 3310-1000-B00-A, len: 15
+I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-302-C, len: 15
-I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3320-1000-100-C, len: 15
-I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
-I> create_pm_ids: id: 2614-0000-100-G, len: 15
+I> create_pm_ids: id: 2597-0000-501-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3326-1000-000-L, len: 15
+I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
 I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50
 E> "i2c@c250000" doesn't exist, creating 
 E> "module@0x50" doesn't exist, creating 
-I> Adding plugin-manager/ids/2597-0000-302=/i2c@c250000:module@0x57
+I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57
 E> "module@0x57" doesn't exist, creating 
-I> Adding plugin-manager/ids/3320-1000-100=/i2c@c240000:module@0x51
-E> "i2c@c240000" doesn't exist, creating 
-E> "module@0x51" doesn't exist, creating 
-I> Adding plugin-manager/ids/2614-0000-100=/i2c@3160000:module@0x50
-E> "i2c@3160000" doesn't exist, creating 
-E> "module@0x50" doesn't exist, creating 
-I> Adding plugin-manager/ids/3326-1000-000=/i2c@3180000:module@0x54
+I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54
 E> "i2c@3180000" doesn't exist, creating 
 E> "module@0x54" doesn't exist, creating 
-I> Adding plugin-manager/ids/3310-1000-B00-A
+I> Adding plugin-manager/ids/3310-1000-B00-E
 I> Adding plugin-manager/configs/3310-mem-type 00
 I> Adding plugin-manager/configs/3310-power-config 00
 I> Adding plugin-manager/configs/3310-misc-config 00
@@ -593,7 +579,7 @@
 Out:   serial
 Err:   serial
 Net:   eth0: ethernet@2490000
-Hit any key to stop autoboot:  2 [0000.183] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
+Hit any key to stop autoboot:  2 [0000.188] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
 I> Default Heap @ [0xd486400 - 0xd488400]
 I> DMA Heap @ [0x84900000 - 0x85300000]
 I> bit @ 0xd480000
@@ -761,24 +747,20 @@
 I> Device at /i2c@c250000:0x57
 I> Find /i2c@c240000's alias i2c1
 I> Reading eeprom i2c=1 address=0x51
-I> Device at /i2c@c240000:0x51
+I> Eeprom read failed 0x1a800027
 I> Find /i2c@3160000's alias i2c0
 I> Reading eeprom i2c=0 address=0x50
-I> Device at /i2c@3160000:0x50
+I> Eeprom read failed 0x1a800027
 I> Find /i2c@3180000's alias i2c2
 I> Reading eeprom i2c=2 address=0x54
 I> Enabling gpio chip_id = 2, gpio pin = 9
 I> Disabling gpio chip_id = 2, gpio pin = 9
 I> Device at /i2c@3180000:0x54
-I> create_pm_ids: id: 3310-1000-B00-A, len: 15
-I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-302-C, len: 15
+I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3320-1000-100-C, len: 15
-I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
-I> create_pm_ids: id: 2614-0000-100-G, len: 15
+I> create_pm_ids: id: 2597-0000-501-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3326-1000-000-L, len: 15
+I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
 initializing target

 calling apps_init()

@@ -799,52 +781,42 @@
 I> Kernel DTB @ 0x92000000
 I> Verified boot state = Orange
 E> tegrabl_display_clear: display is not initialized
-I> Checking boot.img header magic ... [0001.857] I> [OK]
+I> Checking boot.img header magic ... [0001.783] I> [OK]
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
-I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.874] I> Done
-I> Move ramdisk (len: 6265169) from 0xa8072800 to 0x98000000
+I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.800] I> Done
+I> Move ramdisk (len: 6265292) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f9951
+I> Ramdisk: Base: 0x98000000; Size: 0x5f99cc
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0334916010149
+I> add_serialno: Serial Num = 0321217203834
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2525/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0334916010149 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl11215/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0321217203834 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:80:e5:8d
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:80:e5:8e
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:80:e5:8f
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:93:c8
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:93:c9
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:93:ca
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
-I> create_pm_ids: id: 3310-1000-B00-A, len: 15
+I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-302-C, len: 15
+I> create_pm_ids: id: 2597-0000-501-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3320-1000-100-C, len: 15
-I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
-I> create_pm_ids: id: 2614-0000-100-G, len: 15
-I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3326-1000-000-L, len: 15
+I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
 I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50
 E> "i2c@c250000" doesn't exist, creating 
 E> "module@0x50" doesn't exist, creating 
-I> Adding plugin-manager/ids/2597-0000-302=/i2c@c250000:module@0x57
+I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57
 E> "module@0x57" doesn't exist, creating 
-I> Adding plugin-manager/ids/3320-1000-100=/i2c@c240000:module@0x51
-E> "i2c@c240000" doesn't exist, creating 
-E> "module@0x51" doesn't exist, creating 
-I> Adding plugin-manager/ids/2614-0000-100=/i2c@3160000:module@0x50
-E> "i2c@3160000" doesn't exist, creating 
-E> "module@0x50" doesn't exist, creating 
-I> Adding plugin-manager/ids/3326-1000-000=/i2c@3180000:module@0x54
+I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54
 E> "i2c@3180000" doesn't exist, creating 
 E> "module@0x54" doesn't exist, creating 
-I> Adding plugin-manager/ids/3310-1000-B00-A
+I> Adding plugin-manager/ids/3310-1000-B00-E
 I> Adding plugin-manager/configs/3310-mem-type 00
 I> Adding plugin-manager/configs/3310-power-config 00
 I> Adding plugin-manager/configs/3310-misc-config 00
@@ -875,23 +847,23 @@
 Net:   eth0: ethernet@2490000
 Hit any key to stop autoboot:  2  1  0 
 MMC: no card present
-mmc_init: -123, time 0
+mmc_init: -123, time 1
 switch to partitions #0, OK
 mmc0(part 0) is current device
 Scanning mmc 0:1...
 Found /boot/extlinux/extlinux.conf
 Retrieving file: /boot/extlinux/extlinux.conf
-431 bytes read in 70 ms (5.9 KiB/s)
+432 bytes read in 69 ms (5.9 KiB/s)
 p2771-0000 NFS boot options
 1:	primary kernel
 Enter choice: 1:	primary kernel
 Retrieving file: /boot/initrd
-6265169 bytes read in 201 ms (29.7 MiB/s)
+6265292 bytes read in 209 ms (28.6 MiB/s)
 Retrieving file: /boot/Image
 16646656 bytes read in 441 ms (36 MiB/s)
-append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2525/nfsroot,nolock,nfsvers=2 rootwait
+append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl11215/nfsroot,nolock,nfsvers=2 rootwait
 Retrieving file: /boot/tegra186-p2771-0000.dtb
-17547 bytes read in 60 ms (285.2 KiB/s)
+17547 bytes read in 52 ms (329.1 KiB/s)
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Using Device Tree in place at 0000000082000000, end 000000008200748a
@@ -1001,21 +973,21 @@
 mmc2: Switching to 3.3V signalling voltage failed
 mmc2: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-max77686-rtc max77620-rtc: setting system clock to 2017-01-22 07:23:16 UTC (1485069796)
-dwc-eth-dwmac 2490000.ethernet eth0: device MAC address 42:1d:73:4f:01:53
+max77686-rtc max77620-rtc: setting system clock to 2016-08-03 06:31:10 UTC (1470205870)
+dwc-eth-dwmac 2490000.ethernet eth0: device MAC address 66:a3:54:68:a0:92
 Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
 dwmac4: Master AXI performs any burst length
-dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
-dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
 mmc2: new high speed MMC card at address 0001
 mmcblk2: mmc2:0001 032G34 29.1 GiB 
 mmcblk2boot0: mmc2:0001 032G34 partition 1 4.00 MiB
 mmcblk2boot1: mmc2:0001 032G34 partition 2 4.00 MiB
 mmcblk2rpmb: mmc2:0001 032G34 partition 3 4.00 MiB, chardev (240:0)
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
+dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
+dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
 dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
 IP-Config: Complete:
-     device=eth0, hwaddr=42:1d:73:4f:01:53, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
+     device=eth0, hwaddr=66:a3:54:68:a0:92, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
      host=192.168.99.2, domain=, nis-domain=(none)
      bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
 VDD_RTC: disabling
@@ -1025,7 +997,7 @@
   No soundcards found.
 Freeing unused kernel memory: 1088K
 /init: line 58: chmod: command not found
-L4T-INITRD Build DATE: Sun Jan 22 07:23:19 UTC 2017
+L4T-INITRD Build DATE: Wed Aug  3 06:31:14 UTC 2016
 Root device found: nfs
 Ethernet interfaces: eth0
 IP Address: 192.168.99.2
@@ -1037,106 +1009,106 @@
 Welcome to [1mUbuntu 16.04 LTS[0m!
 
 systemd[1]: Set hostname to <tegra-ubuntu>.
-systemd[1]: Listening on udev Control Socket.
-Listening on udev Control Socket.
-systemd[1]: Listening on Syslog Socket.
-Listening on Syslog Socket.
-systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
-Started Dispatch Password Requests to Console Directory Watch.
+systemd[1]: Started Forward Password Requests to Wall Directory Watch.
+Started Forward Password Requests to Wall Directory Watch.
 systemd[1]: Listening on Journal Socket.
 Listening on Journal Socket.
-systemd[1]: Reached target Swap.
-Reached target Swap.
-systemd[1]: Reached target Encrypted Volumes.
-Reached target Encrypted Volumes.
-systemd[1]: Created slice User and Session Slice.
-Created slice User and Session Slice.
-Started Forward Password Requests to Wall Directory Watch.
-Reached target Paths.
+systemd[1]: Listening on Journal Socket (/dev/log).
 Listening on Journal Socket (/dev/log).
-Listening on Journal Audit Socket.
-Listening on /dev/initctl Compatibility Named Pipe.
-Listening on udev Kernel Socket.
+systemd[1]: Created slice System Slice.
 Created slice System Slice.
+systemd[1]: Created slice system-serial\x2dgetty.slice.
+Created slice system-serial\x2dgetty.slice.
+systemd[1]: Mounting POSIX Message Queue File System...
+         Mounting POSIX Message Queue File System...
+systemd[1]: Starting Load Kernel Modules...
+         Starting Load Kernel Modules...
          Mounting RPC Pipe File System...
-         Mounting Debug File System...
-         Starting Create Static Device Nodes in /dev...
+Created slice system-getty.slice.
          Starting Remount Root and Kernel File Systems...
-         Starting Load Kernel Modules...
+Reached target Swap.
+Listening on udev Kernel Socket.
+Listening on udev Control Socket.
+Reached target Encrypted Volumes.
+Started Dispatch Password Requests to Console Directory Watch.
+Created slice User and Session Slice.
 Reached target Slices.
+         Starting Create Static Device Nodes in /dev...
+Listening on /dev/initctl Compatibility Named Pipe.
+Reached target Paths.
+         Mounting Debug File System...
+Listening on Journal Audit Socket.
+Listening on Syslog Socket.
          Starting Journal Service...
-Created slice system-getty.slice.
-         Mounting POSIX Message Queue File System...
-Created slice system-serial\x2dgetty.slice.
          Mounting Huge Pages File System...
 Mounted Debug File System.
 Mounted POSIX Message Queue File System.
 Mounted RPC Pipe File System.
-Started Remount Root and Kernel File Systems.
-Started Load Kernel Modules.
 Mounted Huge Pages File System.
-         Starting Apply Kernel Variables...
-         Mounting Configuration File System...
-         Starting udev Coldplug all Devices...
+Started Load Kernel Modules.
+Started Remount Root and Kernel File Systems.
          Starting Load/Save Random Seed...
+         Starting udev Coldplug all Devices...
+         Mounting Configuration File System...
+         Starting Apply Kernel Variables...
 Mounted Configuration File System.
 Started Journal Service.
-Started Apply Kernel Variables.
-Started Load/Save Random Seed.
-         Starting Flush Journal to Persistent Storage...
 Started Create Static Device Nodes in /dev.
-         Starting udev Kernel Device Manager...
+Started Load/Save Random Seed.
+Started Apply Kernel Variables.
 Reached target Local File Systems (Pre).
 Reached target Local File Systems.
          Starting Raise network interfaces...
-         Starting Preprocess NFS configuration...
          Starting Set console keymap...
-Started udev Coldplug all Devices.
+         Starting Preprocess NFS configuration...
+         Starting udev Kernel Device Manager...
+         Starting Flush Journal to Persistent Storage...
 Failed to start Set console keymap.
 See 'systemctl status console-setup.service' for details.
-systemd-journald[1489]: Received request to flush runtime journal from PID 1
-Started Preprocess NFS configuration.
+systemd-journald[1491]: Received request to flush runtime journal from PID 1
 Started Flush Journal to Persistent Storage.
          Starting Create Volatile Files and Directories...
+Started Preprocess NFS configuration.
+Started udev Coldplug all Devices.
 Reached target NFS client services.
 Reached target Remote File Systems (Pre).
 Reached target Remote File Systems.
-Started udev Kernel Device Manager.
 Started Create Volatile Files and Directories.
-Found device /dev/ttyS0.
-Started Raise network interfaces.
-Reached target Network.
-Reached target Network is Online.
-Reached target System Time Synchronized.
+Started udev Kernel Device Manager.
          Starting Update UTMP about System Boot/Shutdown...
+Reached target System Time Synchronized.
 Started Update UTMP about System Boot/Shutdown.
 Reached target System Initialization.
-Started Daily apt activities.
-Listening on D-Bus System Message Bus Socket.
-Started Daily Cleanup of Temporary Directories.
-Reached target Timers.
 Listening on RPCbind Server Activation Socket.
+Started Daily Cleanup of Temporary Directories.
+Listening on D-Bus System Message Bus Socket.
 Reached target Sockets.
 Reached target Basic System.
 Started Regular background program processing daemon.
          Starting Login Service...
-         Starting System Logging Service...
-         Starting OpenBSD Secure Shell server...
-         Starting LSB: Start NTP daemon...
-         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
          Starting Permit User Sessions...
+         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
+         Starting System Logging Service...
 Started D-Bus System Message Bus.
-         Starting /etc/rc.local Compatibility...
+Started Daily apt activities.
+Reached target Timers.
 Started System Logging Service.
 Started Permit User Sessions.
+Found device /dev/ttyS0.
+Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
+Started Raise network interfaces.
+Reached target Network.
+         Starting OpenBSD Secure Shell server...
+Reached target Network is Online.
+         Starting LSB: Start NTP daemon...
+         Starting /etc/rc.local Compatibility...
+Started Login Service.
 Started /etc/rc.local Compatibility.
 Started Getty on tty1.
 Started Serial Getty on ttyS0.
 Reached target Login Prompts.
-Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
-Started Login Service.
-Started OpenBSD Secure Shell server.
 Started LSB: Start NTP daemon.
+Started OpenBSD Secure Shell server.
 Reached target Multi-User System.
 Reached target Graphical Interface.
          Starting Update UTMP about System Runlevel Changes...
@@ -1144,7 +1116,7 @@
 

 Ubuntu 16.04 LTS tegra-ubuntu ttyS0
 
-tegra-ubuntu login: [0000.183] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
+tegra-ubuntu login: [0000.184] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
 I> Default Heap @ [0xd486400 - 0xd488400]
 I> DMA Heap @ [0x84900000 - 0x85300000]
 I> bit @ 0xd480000
@@ -1312,24 +1284,20 @@
 I> Device at /i2c@c250000:0x57
 I> Find /i2c@c240000's alias i2c1
 I> Reading eeprom i2c=1 address=0x51
-I> Device at /i2c@c240000:0x51
+I> Eeprom read failed 0x1a800027
 I> Find /i2c@3160000's alias i2c0
 I> Reading eeprom i2c=0 address=0x50
-I> Device at /i2c@3160000:0x50
+I> Eeprom read failed 0x1a800027
 I> Find /i2c@3180000's alias i2c2
 I> Reading eeprom i2c=2 address=0x54
 I> Enabling gpio chip_id = 2, gpio pin = 9
 I> Disabling gpio chip_id = 2, gpio pin = 9
 I> Device at /i2c@3180000:0x54
-I> create_pm_ids: id: 3310-1000-B00-A, len: 15
+I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-302-C, len: 15
+I> create_pm_ids: id: 2597-0000-501-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3320-1000-100-C, len: 15
-I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
-I> create_pm_ids: id: 2614-0000-100-G, len: 15
-I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3326-1000-000-L, len: 15
+I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
 initializing target

 calling apps_init()

@@ -1350,52 +1318,42 @@
 I> Kernel DTB @ 0x92000000
 I> Verified boot state = Orange
 E> tegrabl_display_clear: display is not initialized
-I> Checking boot.img header magic ... [0001.858] I> [OK]
+I> Checking boot.img header magic ... [0001.779] I> [OK]
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
-I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.875] I> Done
-I> Move ramdisk (len: 6265169) from 0xa8072800 to 0x98000000
+I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.796] I> Done
+I> Move ramdisk (len: 6265292) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f9951
+I> Ramdisk: Base: 0x98000000; Size: 0x5f99cc
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0334916010149
+I> add_serialno: Serial Num = 0321217203834
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2525/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0334916010149 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl11215/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0321217203834 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:80:e5:8d
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:80:e5:8e
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:80:e5:8f
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:93:c8
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:93:c9
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:93:ca
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
-I> create_pm_ids: id: 3310-1000-B00-A, len: 15
-I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-302-C, len: 15
+I> create_pm_ids: id: 3310-1000-B00-E, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3320-1000-100-C, len: 15
-I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
-I> create_pm_ids: id: 2614-0000-100-G, len: 15
+I> create_pm_ids: id: 2597-0000-501-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3326-1000-000-L, len: 15
+I> create_pm_ids: id: 3326-1000-100-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
 I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50
 E> "i2c@c250000" doesn't exist, creating 
 E> "module@0x50" doesn't exist, creating 
-I> Adding plugin-manager/ids/2597-0000-302=/i2c@c250000:module@0x57
+I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57
 E> "module@0x57" doesn't exist, creating 
-I> Adding plugin-manager/ids/3320-1000-100=/i2c@c240000:module@0x51
-E> "i2c@c240000" doesn't exist, creating 
-E> "module@0x51" doesn't exist, creating 
-I> Adding plugin-manager/ids/2614-0000-100=/i2c@3160000:module@0x50
-E> "i2c@3160000" doesn't exist, creating 
-E> "module@0x50" doesn't exist, creating 
-I> Adding plugin-manager/ids/3326-1000-000=/i2c@3180000:module@0x54
+I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54
 E> "i2c@3180000" doesn't exist, creating 
 E> "module@0x54" doesn't exist, creating 
-I> Adding plugin-manager/ids/3310-1000-B00-A
+I> Adding plugin-manager/ids/3310-1000-B00-E
 I> Adding plugin-manager/configs/3310-mem-type 00
 I> Adding plugin-manager/configs/3310-power-config 00
 I> Adding plugin-manager/configs/3310-misc-config 00
@@ -1426,23 +1384,23 @@
 Net:   eth0: ethernet@2490000
 Hit any key to stop autoboot:  2  1  0 
 MMC: no card present
-mmc_init: -123, time 1
+mmc_init: -123, time 0
 switch to partitions #0, OK
 mmc0(part 0) is current device
 Scanning mmc 0:1...
 Found /boot/extlinux/extlinux.conf
 Retrieving file: /boot/extlinux/extlinux.conf
-431 bytes read in 69 ms (5.9 KiB/s)
+432 bytes read in 69 ms (5.9 KiB/s)
 p2771-0000 NFS boot options
 1:	primary kernel
 Enter choice: 1:	primary kernel
 Retrieving file: /boot/initrd
-6265169 bytes read in 201 ms (29.7 MiB/s)
+6265292 bytes read in 209 ms (28.6 MiB/s)
 Retrieving file: /boot/Image
-16646656 bytes read in 442 ms (35.9 MiB/s)
-append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2525/nfsroot,nolock,nfsvers=2 rootwait
+16646656 bytes read in 441 ms (36 MiB/s)
+append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl11215/nfsroot,nolock,nfsvers=2 rootwait
 Retrieving file: /boot/tegra186-p2771-0000.dtb
-17547 bytes read in 61 ms (280.3 KiB/s)
+17547 bytes read in 52 ms (329.1 KiB/s)
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Using Device Tree in place at 0000000082000000, end 000000008200748a
@@ -1552,8 +1510,8 @@
 mmc2: Switching to 3.3V signalling voltage failed
 mmc2: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-max77686-rtc max77620-rtc: setting system clock to 2017-01-22 07:24:18 UTC (1485069858)
-dwc-eth-dwmac 2490000.ethernet eth0: device MAC address 12:41:15:2d:43:b5
+max77686-rtc max77620-rtc: setting system clock to 2016-08-03 06:32:12 UTC (1470205932)
+dwc-eth-dwmac 2490000.ethernet eth0: device MAC address 4a:a7:52:62:f0:94
 Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
 dwmac4: Master AXI performs any burst length
 dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
@@ -1566,7 +1524,7 @@
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
 dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
 IP-Config: Complete:
-     device=eth0, hwaddr=12:41:15:2d:43:b5, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
+     device=eth0, hwaddr=4a:a7:52:62:f0:94, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
      host=192.168.99.2, domain=, nis-domain=(none)
      bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
 VDD_RTC: disabling
@@ -1576,7 +1534,7 @@
   No soundcards found.
 Freeing unused kernel memory: 1088K
 /init: line 58: chmod: command not found
-L4T-INITRD Build DATE: Sun Jan 22 07:24:21 UTC 2017
+L4T-INITRD Build DATE: Wed Aug  3 06:32:16 UTC 2016
 Root device found: nfs
 Ethernet interfaces: eth0
 IP Address: 192.168.99.2
@@ -1588,72 +1546,72 @@
 Welcome to [1mUbuntu 16.04 LTS[0m!
 
 systemd[1]: Set hostname to <tegra-ubuntu>.
-systemd[1]: Created slice System Slice.
-Created slice System Slice.
-systemd[1]: Created slice User and Session Slice.
-Created slice User and Session Slice.
-systemd[1]: Listening on Syslog Socket.
-Listening on Syslog Socket.
 systemd[1]: Listening on Journal Socket.
 Listening on Journal Socket.
-systemd[1]: Starting Load Kernel Modules...
-         Starting Load Kernel Modules...
-systemd[1]: Mounting POSIX Message Queue File System...
-         Mounting POSIX Message Queue File System...
-systemd[1]: Listening on udev Kernel Socket.
-Listening on udev Kernel Socket.
-Reached target Slices.
+systemd[1]: Started Forward Password Requests to Wall Directory Watch.
+Started Forward Password Requests to Wall Directory Watch.
+systemd[1]: Listening on udev Control Socket.
 Listening on udev Control Socket.
+systemd[1]: Created slice User and Session Slice.
+Created slice User and Session Slice.
+systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
 Started Dispatch Password Requests to Console Directory Watch.
+systemd[1]: Reached target Paths.
+Reached target Paths.
+systemd[1]: Listening on Syslog Socket.
+Listening on Syslog Socket.
+Listening on /dev/initctl Compatibility Named Pipe.
+Created slice System Slice.
          Mounting RPC Pipe File System...
-Listening on Journal Socket (/dev/log).
+Reached target Slices.
 Created slice system-getty.slice.
-         Mounting Debug File System...
 Created slice system-serial\x2dgetty.slice.
          Starting Remount Root and Kernel File Systems...
-Reached target Encrypted Volumes.
+         Mounting POSIX Message Queue File System...
+         Mounting Huge Pages File System...
          Starting Create Static Device Nodes in /dev...
+Reached target Encrypted Volumes.
+Listening on Journal Socket (/dev/log).
+Listening on udev Kernel Socket.
+Reached target Swap.
+         Starting Load Kernel Modules...
+         Mounting Debug File System...
 Listening on Journal Audit Socket.
          Starting Journal Service...
-Listening on /dev/initctl Compatibility Named Pipe.
-         Mounting Huge Pages File System...
-Started Forward Password Requests to Wall Directory Watch.
-Reached target Swap.
-Reached target Paths.
-Mounted Debug File System.
 Mounted Huge Pages File System.
+Mounted Debug File System.
 Mounted POSIX Message Queue File System.
 Mounted RPC Pipe File System.
 Started Journal Service.
-Started Load Kernel Modules.
 Started Remount Root and Kernel File Systems.
 Started Create Static Device Nodes in /dev.
+Started Load Kernel Modules.
+         Starting Apply Kernel Variables...
+         Mounting Configuration File System...
          Starting udev Kernel Device Manager...
-         Starting udev Coldplug all Devices...
-         Starting Load/Save Random Seed...
 Reached target Local File Systems (Pre).
 Reached target Local File Systems.
-         Starting Set console keymap...
          Starting Preprocess NFS configuration...
-         Starting Apply Kernel Variables...
-         Mounting Configuration File System...
+         Starting Set console keymap...
+         Starting udev Coldplug all Devices...
+         Starting Load/Save Random Seed...
          Starting Flush Journal to Persistent Storage...
 Mounted Configuration File System.
-Started udev Kernel Device Manager.
-Started Load/Save Random Seed.
+Started Apply Kernel Variables.
+Started Preprocess NFS configuration.
 Failed to start Set console keymap.
 See 'systemctl status console-setup.service' for details.
-Started Preprocess NFS configuration.
-Started Apply Kernel Variables.
-systemd-journald[1494]: Received request to flush runtime journal from PID 1
-         Starting Raise network interfaces...
+Started Load/Save Random Seed.
+Started udev Kernel Device Manager.
+systemd-journald[1496]: Received request to flush runtime journal from PID 1
 Reached target NFS client services.
 Reached target Remote File Systems (Pre).
 Reached target Remote File Systems.
+         Starting Raise network interfaces...
 Started Flush Journal to Persistent Storage.
+         Starting Create Volatile Files and Directories...
 Found device /dev/ttyS0.
 Started udev Coldplug all Devices.
-         Starting Create Volatile Files and Directories...
 Started Create Volatile Files and Directories.
 Started Raise network interfaces.
 Reached target Network.
@@ -1662,31 +1620,31 @@
          Starting Update UTMP about System Boot/Shutdown...
 Started Update UTMP about System Boot/Shutdown.
 Reached target System Initialization.
-Started Daily apt activities.
 Started Daily Cleanup of Temporary Directories.
+Started Daily apt activities.
 Reached target Timers.
-Listening on RPCbind Server Activation Socket.
 Listening on D-Bus System Message Bus Socket.
+Listening on RPCbind Server Activation Socket.
 Reached target Sockets.
 Reached target Basic System.
+         Starting /etc/rc.local Compatibility...
+Started D-Bus System Message Bus.
 Started Regular background program processing daemon.
-         Starting LSB: Start NTP daemon...
-         Starting Permit User Sessions...
+         Starting System Logging Service...
          Starting OpenBSD Secure Shell server...
-         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
          Starting Login Service...
-Started D-Bus System Message Bus.
-         Starting System Logging Service...
-         Starting /etc/rc.local Compatibility...
-Started Permit User Sessions.
-Started /etc/rc.local Compatibility.
+         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
+         Starting LSB: Start NTP daemon...
+         Starting Permit User Sessions...
 Started System Logging Service.
-Started Serial Getty on ttyS0.
+Started /etc/rc.local Compatibility.
+Started Permit User Sessions.
 Started Getty on tty1.
+Started Serial Getty on ttyS0.
 Reached target Login Prompts.
 Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
-Started OpenBSD Secure Shell server.
 Started Login Service.
+Started OpenBSD Secure Shell server.
 Started LSB: Start NTP daemon.
 Reached target Multi-User System.
 Reached target Graphical Interface.
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.318038496 -0800
+++ /tmp/foob	2018-01-21 18:20:33.322038513 -0800
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -48,7 +48,7 @@
 	 #################################################################
 	 #################################################################
 	 ##############################
-	 4.1 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 8065536 (7b1200 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
@@ -57,7 +57,7 @@
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 4 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 21160 (52a8 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-335804-ga8750ddca918 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 14 16:34:20 PST 2018
+Linux version 4.15.0-rc9-336067-g0c5b9b5d9adb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 21 18:04:31 PST 2018
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -267,7 +267,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x27421185, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x7c5780b1, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.338038587 -0800
+++ /tmp/foob	2018-01-21 18:20:33.338038587 -0800
@@ -46,20 +46,20 @@
 	 #################################################################
 	 #################################################################
 	 ###############################
-	 3.9 MiB/s
+	 4.1 MiB/s
 done
-Bytes transferred = 6168192 (5e1e80 hex)
+Bytes transferred = 6169624 (5e2418 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 3.4 MiB/s
+	 4 MiB/s
 done
 Bytes transferred = 21160 (52a8 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5e1e80 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5e2418 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024102a7
@@ -67,7 +67,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-15855-ga8750dd (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 14 16:32:59 PST 2018
+Linux version 4.15.0-rc9-16118-g0c5b9b5 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 21 18:02:59 PST 2018
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -257,7 +257,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xd9d12045, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xdbbc8d34, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig%jetson-tx1_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.366038716 -0800
+++ /tmp/foob	2018-01-21 18:20:33.366038716 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 749951 us
-Basic modules init took 348774 us
+Tegraboot started after 814836 us
+Basic modules init took 348701 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14366 us
-Carveout took 252663 us
-CPU initialization took 92426 us
-Total time taken by TegraBoot 708229 us
+Next stage binary read took 14364 us
+Carveout took 252676 us
+CPU initialization took 92484 us
+Total time taken by TegraBoot 708225 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.589] LPDDR4 Training: Number of tables = 10
+64b[0001.652] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,7 +117,7 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig%jetson-tx1
-16710144 bytes read in 853 ms (18.7 MiB/s)
+16710144 bytes read in 860 ms (18.5 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
 44764 bytes read in 454 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc8-15855-ga8750dd (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 14 16:37:50 PST 2018
+Linux version 4.15.0-rc9-217826-g0c5b9b5 (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 21 18:08:41 PST 2018
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -233,7 +233,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.268:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 000000009b353ee1, 1 data @ 0000000044582d91)
+vdso: 2 pages (1 code @ 00000000dffc1dfb, 1 data @ 0000000096bcffe1)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -268,7 +268,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 809a6000
+kvm [1]: IDMAP page: 809a7000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
@@ -346,7 +346,6 @@
 hctosys: unable to open rtc device (rtc0)
 ALSA device list:
   No soundcards found.
-Waiting for root device PARTUUID=00000000-0001-0000-788f-a75600000000...
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 SDW16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SDW16G partition 1 4.00 MiB
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.402038882 -0800
+++ /tmp/foob	2018-01-21 18:20:33.406038899 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 761724 us
-Basic modules init took 348439 us
+Tegraboot started after 745014 us
+Basic modules init took 348580 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14388 us
-Carveout took 252669 us
-CPU initialization took 92452 us
-Total time taken by TegraBoot 707948 us
+Next stage binary read took 14390 us
+Carveout took 252659 us
+CPU initialization took 92457 us
+Total time taken by TegraBoot 708086 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.600] LPDDR4 Training: Number of tables = 10
+64b[0001.584] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -121,7 +121,7 @@
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
 44764 bytes read in 454 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 495 ms (3.1 MiB/s)
+1627787 bytes read in 494 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc8-335804-ga8750ddca918 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 14 16:40:42 PST 2018
+Linux version 4.15.0-rc9-336067-g0c5b9b5d9adb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 21 18:10:42 PST 2018
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -233,7 +233,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.268:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 000000003fc73c4d, 1 data @ 000000001ada8617)
+vdso: 2 pages (1 code @ 00000000069a91a3, 1 data @ 000000007d672ecd)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
Diff for ./tegra210-p2371-2180/tegra210-p2371-2180/defconfig%jetson-tx1_log.txt
Binary files /tmp/fooa and /tmp/foob differ
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.450039102 -0800
+++ /tmp/foob	2018-01-21 18:20:33.454039120 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc8-335804-ga8750ddca918 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 14 16:40:42 PST 2018
+Linux version 4.15.0-rc9-336067-g0c5b9b5d9adb (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Jan 21 18:10:42 PST 2018
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -108,7 +108,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 0000000018f9e5a5, 1 data @ 000000007b8f9cc2)
+vdso: 2 pages (1 code @ 000000005262ed88, 1 data @ 000000008a707b22)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -264,7 +264,7 @@
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB, chardev (240:0)
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
-max77686-rtc max77620-rtc: setting system clock to 2001-10-26 06:09:47 UTC (1004076587)
+max77686-rtc max77620-rtc: setting system clock to 2001-11-02 07:39:39 UTC (1004686779)
 PP1200_AVDD: disabling
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
@@ -275,8 +275,8 @@
 PP1800_CAM: disabling
 ALSA device list:
   No soundcards found.
-Freeing unused kernel memory: 1088K
 tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
+Freeing unused kernel memory: 1088K
 
 System initialization...
 
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.474039213 -0800
+++ /tmp/foob	2018-01-21 18:20:33.478039231 -0800
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ##############################
-	 3.2 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 8065536 (7b1200 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
@@ -49,7 +49,7 @@
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.7 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-335804-ga8750ddca918 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 14 16:34:20 PST 2018
+Linux version 4.15.0-rc9-336067-g0c5b9b5d9adb (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Jan 21 18:04:31 PST 2018
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -433,7 +433,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf90e4b86, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xa77c3bce, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -464,4 +464,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.504061] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.494024] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2018-01-21 18:20:33.490039286 -0800
+++ /tmp/foob	2018-01-21 18:20:33.490039286 -0800
@@ -40,7 +40,7 @@
 	 ###############################
 	 2.8 MiB/s
 done
-Bytes transferred = 6168192 (5e1e80 hex)
+Bytes transferred = 6169624 (5e2418 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -51,7 +51,7 @@
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5e1e80 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5e2418 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc8-15855-ga8750dd (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 14 16:32:59 PST 2018
+Linux version 4.15.0-rc9-16118-g0c5b9b5 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Jan 21 18:02:59 PST 2018
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -427,7 +427,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x61c9f9b3, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x2699aafb, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -464,4 +464,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.7
\ No newline at end of file
+root@(none):/# [    4.727591] usb 2-1: new high-speed USB device number 2 using tegra-ehci
