U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18) TEGRA30 Board: NVIDIA Beaver I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra30 (Beaver) # Tegra30 (Beaver) # usb reset (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra30 (Beaver) # tftpboot 0x81000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################## 3 MiB/s done Bytes transferred = 8061440 (7b0200 hex) Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.101 Filename 'tegra30-beaver.dtb'. Load address: 0x82000000 Loading: *#### 2.9 MiB/s done Bytes transferred = 51470 (c90e hex) Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x7b0200 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8fff0000, end 8ffff90d ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc5-335113-g464e1d5f23cc (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sat Dec 23 21:03:22 PST 2017 [ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39040 r8192 d22400 u69632 [ 0.000000] pcpu-alloc: s39040 r8192 d22400 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1992476K/2096128K available (11264K kernel code, 1602K rwdata, 4296K rodata, 2048K init, 404K bss, 38116K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1603 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 405 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9 [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 8 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x4e480001 [ 0.000012] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000031] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000040] Switching to timer-based delay loop, resolution 1000ns [ 0.003079] Console: colour dummy device 80x30 [ 0.003111] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) [ 0.003121] pid_max: default: 32768 minimum: 301 [ 0.003195] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003204] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003612] CPU: Testing write buffer coherency: ok [ 0.003919] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004150] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.005506] Hierarchical SRCU implementation. [ 0.006886] Tegra Revision: A03 SKU: 128 CPU Process: 4 SoC Process: 0 [ 0.007473] EFI services will not be available. [ 0.007581] smp: Bringing up secondary CPUs ... [ 0.010370] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.020348] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.030328] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.030381] smp: Brought up 1 node, 4 CPUs [ 0.030394] SMP: Total of 4 processors activated (8.00 BogoMIPS). [ 0.030399] CPU: All CPU(s) started in SVC mode. [ 0.031123] devtmpfs: initialized [ 0.038130] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.038558] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.038576] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.042018] pinctrl core: initialized pinctrl subsystem [ 0.043391] DMI not present or invalid. [ 0.043638] NET: Registered protocol family 16 [ 0.046487] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.048175] cpuidle: using governor menu [ 0.061546] No ATAGs? [ 0.061654] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.061666] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.066030] Serial: AMBA PL011 UART driver [ 0.066642] tegra-mc 7000f000.memory-controller: no memory timings for RAM code 3 registered [ 0.066737] iommu: Adding device reg-dummy to group 0 [ 0.066763] iommu: Adding device 3000.pcie to group 1 [ 0.066782] iommu: Adding device 50000000.host1x to group 2 [ 0.066800] iommu: Adding device 54040000.mpe to group 3 [ 0.066823] iommu: Adding device 54080000.vi to group 4 [ 0.066841] iommu: Adding device 540c0000.epp to group 5 [ 0.066866] iommu: Adding device 54100000.isp to group 6 [ 0.066884] iommu: Adding device 54140000.gr2d to group 7 [ 0.066902] iommu: Adding device 54180000.gr3d to group 8 [ 0.066966] iommu: Adding device 54200000.dc to group 9 [ 0.067007] iommu: Adding device 54240000.dc to group 10 [ 0.067030] iommu: Adding device 54280000.hdmi to group 11 [ 0.067049] iommu: Adding device 50040600.timer to group 12 [ 0.067067] iommu: Adding device 50043000.cache-controller to group 13 [ 0.067084] iommu: Adding device 60005000.timer to group 14 [ 0.067101] iommu: Adding device 60007000.flow-controller to group 15 [ 0.067126] iommu: Adding device 6000a000.dma to group 16 [ 0.067143] iommu: Adding device 6000c000.ahb to group 17 [ 0.067160] iommu: Adding device 6000d000.gpio to group 18 [ 0.067176] iommu: Adding device 70000800.apbmisc to group 19 [ 0.067198] iommu: Adding device 70000868.pinmux to group 20 [ 0.067215] iommu: Adding device 70006000.serial to group 21 [ 0.067231] iommu: Adding device 7000e000.rtc to group 22 [ 0.067248] iommu: Adding device 7000c000.i2c to group 23 [ 0.067265] iommu: Adding device 7000c400.i2c to group 24 [ 0.067282] iommu: Adding device 7000c500.i2c to group 25 [ 0.067304] iommu: Adding device 7000c700.i2c to group 26 [ 0.067328] iommu: Adding device 7000d000.i2c to group 27 [ 0.067350] iommu: Adding device 7000da00.spi to group 28 [ 0.067369] iommu: Adding device 7000e400.pmc to group 29 [ 0.067386] iommu: Adding device 7000f000.memory-controller to group 30 [ 0.067403] iommu: Adding device 7000f800.fuse to group 31 [ 0.067420] iommu: Adding device 70080000.ahub to group 32 [ 0.067438] iommu: Adding device 78000000.sdhci to group 33 [ 0.067455] iommu: Adding device 78000600.sdhci to group 34 [ 0.067472] iommu: Adding device 7d000000.usb to group 35 [ 0.067491] iommu: Adding device 7d000000.usb-phy to group 36 [ 0.067518] iommu: Adding device 7d004000.usb to group 37 [ 0.067538] iommu: Adding device 7d004000.usb-phy to group 38 [ 0.067554] iommu: Adding device 7d008000.usb to group 39 [ 0.067573] iommu: Adding device 7d008000.usb-phy to group 40 [ 0.067589] iommu: Adding device pmu to group 41 [ 0.067605] iommu: Adding device clocks to group 42 [ 0.067621] iommu: Adding device gpio-leds to group 43 [ 0.067637] iommu: Adding device regulators to group 44 [ 0.067661] iommu: Adding device regulators:regulator@0 to group 45 [ 0.067692] iommu: Adding device regulators:regulator@1 to group 46 [ 0.067710] iommu: Adding device regulators:regulator@2 to group 47 [ 0.067735] iommu: Adding device regulators:regulator@3 to group 48 [ 0.067753] iommu: Adding device regulators:regulator@4 to group 49 [ 0.067771] iommu: Adding device regulators:regulator@5 to group 50 [ 0.067788] iommu: Adding device regulators:regulator@6 to group 51 [ 0.067805] iommu: Adding device regulators:regulator@7 to group 52 [ 0.067827] iommu: Adding device regulators:regulator@8 to group 53 [ 0.067844] iommu: Adding device sound to group 54 [ 0.076360] AT91: Could not find identification node [ 0.076847] vdd_5v_sata: Failed to request enable GPIO30: -517 [ 0.076862] reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517 [ 0.076913] usb1_vbus: Failed to request enable GPIO238: -517 [ 0.076920] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ 0.076968] usb3_vbus: Failed to request enable GPIO236: -517 [ 0.076975] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.077080] sys_3v3_pexs: Failed to request enable GPIO95: -517 [ 0.077087] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.078959] vgaarb: loaded [ 0.079429] SCSI subsystem initialized [ 0.079584] libata version 3.00 loaded. [ 0.079716] usbcore: registered new interface driver usbfs [ 0.079745] usbcore: registered new interface driver hub [ 0.079779] usbcore: registered new device driver usb [ 0.084186] iommu: Adding device tps65910-gpio to group 55 [ 0.084485] iommu: Adding device tps65910-pmic to group 56 [ 0.086970] vrtc: supplied by vdd_5v_in [ 0.090250] vio: supplied by vdd_5v_in [ 0.101817] vdd1: supplied by vdd_5v_in [ 0.103176] vddio_ddr_1v2: Bringing 600000uV into 1200000-1200000uV [ 0.111812] vdd2: supplied by vdd_5v_in [ 0.131803] ldo1: supplied by vdd_1v5_gen [ 0.134168] ldo2: supplied by vdd_1v5_gen [ 0.134640] vdd_sata,avdd_plle: Bringing 1200000uV into 1050000-1050000uV [ 0.136863] ldo3: supplied by vdd_5v_in [ 0.139200] ldo4: supplied by vdd_5v_in [ 0.141803] ldo5: supplied by vdd_5v_in [ 0.151795] ldo6: supplied by vdd_1v8_gen [ 0.152267] avdd_dsi_csi,pwrdet_mipi: Bringing 1000000uV into 1200000-1200000uV [ 0.154503] ldo7: supplied by vdd_1v8_gen [ 0.161794] ldo8: supplied by vdd_1v8_gen [ 0.170079] iommu: Adding device tps65910-rtc to group 57 [ 0.170210] iommu: Adding device tps65910-power to group 58 [ 0.171978] pps_core: LinuxPPS API ver. 1 registered [ 0.171986] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.172001] PTP clock support registered [ 0.172140] EDAC MC: Ver: 3.0.0 [ 0.172334] dmi: Firmware registration failed. [ 0.173694] clocksource: Switched to clocksource timer_us [ 0.203791] NET: Registered protocol family 2 [ 0.204189] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.204242] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.204329] TCP: Hash tables configured (established 8192 bind 8192) [ 0.204475] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.204542] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.204709] NET: Registered protocol family 1 [ 0.205051] RPC: Registered named UNIX socket transport module. [ 0.205058] RPC: Registered udp transport module. [ 0.205062] RPC: Registered tcp transport module. [ 0.205066] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.205076] PCI: CLS 0 bytes, default 64 [ 0.205902] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.206149] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.206666] iommu: Adding device alarmtimer to group 59 [ 0.207258] Initialise system trusted keyrings [ 0.207377] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.210573] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.210975] NFS: Registering the id_resolver key type [ 0.210996] Key type id_resolver registered [ 0.211001] Key type id_legacy registered [ 0.211031] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.211984] Key type asymmetric registered [ 0.211994] Asymmetric key parser 'x509' registered [ 0.212029] bounce: pool size: 64 pages [ 0.212068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.212077] io scheduler noop registered [ 0.212082] io scheduler deadline registered [ 0.212219] io scheduler cfq registered (default) [ 0.212226] io scheduler mq-deadline registered [ 0.212232] io scheduler kyber registered [ 0.218989] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1" [ 0.219005] tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1" [ 0.219019] tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1" [ 0.219028] tegra30-pinctrl 70000868.pinmux: invalid group "vi_hsync_pd7" for function "rsvd1" [ 0.219481] tegra30-pinctrl 70000868.pinmux: invalid group "hdmi_int_pn7" for function "rsvd1" [ 0.219524] tegra30-pinctrl 70000868.pinmux: invalid group "ulpi_data3_po4" for function "rsvd1" [ 0.219848] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d10_pt2" for function "rsvd1" [ 0.219859] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d11_pt3" for function "rsvd1" [ 0.219870] tegra30-pinctrl 70000868.pinmux: invalid group "vi_d0_pt4" for function "rsvd1" [ 0.219910] tegra30-pinctrl 70000868.pinmux: invalid group "pu0" for function "rsvd1" [ 0.219940] tegra30-pinctrl 70000868.pinmux: invalid group "pu3" for function "rsvd1" [ 0.219969] tegra30-pinctrl 70000868.pinmux: invalid group "pu6" for function "rsvd1" [ 0.220009] tegra30-pinctrl 70000868.pinmux: invalid group "pv3" for function "rsvd1" [ 0.220502] tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1" [ 0.220613] tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1" [ 0.226103] tegra-pcie 3000.pcie: 2x3 configuration [ 0.226250] tegra-pcie 3000.pcie: Failed to get supply 'hvdd-pex': -517 [ 0.232047] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 0.234283] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.263463] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.263547] iommu: Adding device serial8250 to group 60 [ 0.265727] console [ttyS0] disabled [ 0.265765] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra [ 1.639245] console [ttyS0] enabled [ 1.643299] SuperH (H)SCI(F) driver initialized [ 1.648478] msm_serial: driver initialized [ 1.652672] STMicroelectronics ASC driver initialized [ 1.677751] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.690800] brd: module loaded [ 1.699379] loop: module loaded [ 1.708490] m25p80 spi0.1: w25q32 (4096 Kbytes) [ 1.714315] iommu: Adding device Fixed MDIO bus.0 to group 61 [ 1.720558] libphy: Fixed MDIO Bus: probed [ 1.725278] CAN device driver interface [ 1.729678] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.736107] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.741923] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.747878] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.754830] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.762612] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.770056] usbcore: registered new interface driver pegasus [ 1.775731] usbcore: registered new interface driver asix [ 1.781140] usbcore: registered new interface driver ax88179_178a [ 1.787246] usbcore: registered new interface driver cdc_ether [ 1.793085] usbcore: registered new interface driver smsc75xx [ 1.798846] usbcore: registered new interface driver smsc95xx [ 1.804603] usbcore: registered new interface driver net1080 [ 1.810262] usbcore: registered new interface driver cdc_subset [ 1.816195] usbcore: registered new interface driver zaurus [ 1.821781] usbcore: registered new interface driver cdc_ncm [ 1.827628] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.835441] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.841953] ehci-pci: EHCI PCI platform driver [ 1.846422] ehci-platform: EHCI generic platform driver [ 1.851759] ehci-orion: EHCI orion driver [ 1.855859] SPEAr-ehci: EHCI SPEAr driver [ 1.859938] ehci-st: EHCI STMicroelectronics driver [ 1.864891] ehci-exynos: EHCI EXYNOS driver [ 1.869150] ehci-atmel: EHCI Atmel driver [ 1.873219] tegra-ehci: Tegra EHCI driver [ 1.877527] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.883716] ohci-pci: OHCI PCI platform driver [ 1.888173] ohci-platform: OHCI generic platform driver [ 1.893499] SPEAr-ohci: OHCI SPEAr driver [ 1.897588] ohci-st: OHCI STMicroelectronics driver [ 1.902529] ohci-atmel: OHCI Atmel driver [ 1.906998] usbcore: registered new interface driver usb-storage [ 1.916573] iommu: Adding device ci_hdrc.0 to group 62 [ 1.927352] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.934530] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.953307] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0 [ 1.960900] i2c /dev entries driver [ 1.972837] sdhci: Secure Digital Host Controller Interface driver [ 1.979027] sdhci: Copyright(c) Pierre Ossman [ 1.984405] Synopsys Designware Multimedia Card Interface Driver [ 1.991260] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.997470] sdhci-tegra 78000000.sdhci: Got CD GPIO [ 2.002344] sdhci-tegra 78000000.sdhci: Got WP GPIO [ 2.015495] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.083813] mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA [ 2.100194] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.163715] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 2.172626] ledtrig-cpu: registered to indicate activity on CPUs [ 2.178911] usbcore: registered new interface driver usbhid [ 2.184482] usbhid: USB HID core driver [ 2.190889] NET: Registered protocol family 10 [ 2.196024] Segment Routing with IPv6 [ 2.199722] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.206026] NET: Registered protocol family 17 [ 2.210463] can: controller area network core (rev 20170425 abi 9) [ 2.216685] NET: Registered protocol family 29 [ 2.221116] can: raw protocol (rev 20170425) [ 2.225389] can: broadcast manager protocol (rev 20170425 t) [ 2.231037] can: netlink gateway (rev 20170425) max_hops=1 [ 2.236798] Key type dns_resolver registered [ 2.241429] ThumbEE CPU extension supported. [ 2.245715] Registering SWP/SWPB emulation handler [ 2.250892] Loading compiled-in X.509 certificates [ 2.266983] vdd_ddr: supplied by vdd_5v_in [ 2.271942] vdd_5v_sata: supplied by vdd_5v_in [ 2.276730] usb1_vbus: supplied by vdd_5v_in [ 2.281311] usb3_vbus: supplied by vdd_5v_in [ 2.286841] sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in [ 2.292765] sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw [ 2.297428] mmc1: new high speed MMC card at address 0001 [ 2.298202] mmcblk1: mmc1:0001 SEM16G 14.8 GiB [ 2.298677] mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB [ 2.299155] mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB [ 2.301167] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [ 2.301395] mmcblk0: mmc0:aaaa SS04G 3.69 GiB [ 2.304216] mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB, chardev (237:0) [ 2.307868] Primary GPT is invalid, using alternate GPT. [ 2.307885] mmcblk1: p1 p2 p3 p4 p5 [ 2.325813] mmcblk0: p1 p2 p3 [ 2.350193] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 2.356434] tegra-pcie 3000.pcie: 2x3 configuration [ 2.363756] tegra-pcie 3000.pcie: probing port 0, using 2 lanes [ 2.427947] tegra-pcie 3000.pcie: probing port 2, using 2 lanes [ 2.837708] tegra-pcie 3000.pcie: link 2 down, retrying [ 3.246760] tegra-pcie 3000.pcie: link 2 down, retrying [ 3.655810] tegra-pcie 3000.pcie: link 2 down, retrying [ 3.663031] tegra-pcie 3000.pcie: link 2 down, ignoring [ 3.668365] tegra-pcie 3000.pcie: PCI host bridge to bus 0000:00 [ 3.674374] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.680538] pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff] [ 3.687406] pci_bus 0000:00: root bus resource [mem 0x28000000-0x3fffffff pref] [ 3.694706] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.700201] pci 0000:00:01.0: [10de:0e1c] type 01 class 0x060400 [ 3.706216] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.715858] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.725511] pci 0000:00:01.0: enabling Extended Tags [ 3.730463] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.740210] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.749954] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.756564] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.766424] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.776157] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.785797] pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits [ 3.795435] PCI: bus0: Fast back to back transfers disabled [ 3.800996] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.808989] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.818716] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.828516] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 3.834538] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.840111] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 3.847335] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.854646] PCI: bus1: Fast back to back transfers disabled [ 3.860208] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.866842] pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref] [ 3.874577] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.880658] pci 0000:01:00.0: BAR 4: assigned [mem 0x28000000-0x28003fff 64bit pref] [ 3.888401] pci 0000:01:00.0: BAR 2: assigned [mem 0x28004000-0x28004fff 64bit pref] [ 3.896143] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.902223] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.907182] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.913262] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.921013] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.928065] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 3.934366] pcieport 0000:00:01.0: Signaling PME with IRQ 375 [ 3.940343] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.945936] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.951779] r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express [ 3.960400] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xd3f3fcf9, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18 [ 3.970316] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.983198] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.989816] [drm] No driver support for vblank timestamp query. [ 3.995760] [drm] Cannot find any crtc or sizes [ 4.000339] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 4.009800] tegra-ehci 7d004000.usb: EHCI Host Controller [ 4.015220] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 4.022977] tegra-ehci 7d004000.usb: irq 344, io mem 0x7d004000 [ 4.028934] [drm] Cannot find any crtc or sizes [ 4.054092] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 4.061283] hub 1-0:1.0: USB hub found [ 4.065060] hub 1-0:1.0: 1 port detected [ 4.070239] tegra-ehci 7d008000.usb: EHCI Host Controller [ 4.075651] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 4.083394] tegra-ehci 7d008000.usb: irq 345, io mem 0x7d008000 [ 4.114089] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 4.121196] hub 2-0:1.0: USB hub found [ 4.124970] hub 2-0:1.0: 1 port detected [ 4.135305] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 4.144824] vdd_sata,avdd_plle: disabling [ 4.149567] usb1_vbus: disabling [ 4.154354] EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem [ 4.216104] EXT4-fs (mmcblk1p1): warning: mounting fs with errors, running e2fsck is recommended [ 4.226342] EXT4-fs (mmcblk1p1): recovery complete [ 4.232314] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.240454] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 4.251045] devtmpfs: mounted [ 4.256542] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 4.504110] usb 2-1: new high-speed USB device number 2 using tegra-ehci