Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.034510708 -0800
+++ /tmp/foob	2017-12-23 21:19:37.038510726 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd070]
-Linux version 4.15.0-rc4-334808-g1291a0d5049d (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Dec 17 19:39:52 PST 2017
+Linux version 4.15.0-rc5-335113-g464e1d5f23cc (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sat Dec 23 21:09:29 PST 2017
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -75,9 +75,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.176:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 000000007efd021c, 1 data @ 00000000a4f31b5a)
+vdso: 2 pages (1 code @ 00000000dd590cf7, 1 data @ 000000005b423b1f)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -183,7 +183,7 @@
 registered taskstats version 1
 Loading compiled-in X.509 certificates
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2017-12-18 03:46:45 UTC (1513568805)
+rtc-pl031 9010000.pl031: setting system clock to 2017-12-24 05:16:29 UTC (1514092589)
 ALSA device list:
   No soundcards found.
 uart-pl011 9000000.pl011: no DMA platform data
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.062510837 -0800
+++ /tmp/foob	2017-12-23 21:19:37.066510855 -0800
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ##############################
-	 3.2 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 8061440 (7b0200 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
@@ -49,7 +49,7 @@
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.7 MiB/s
+	 2.5 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc4-334808-g1291a0d5049d (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Dec 17 19:33:47 PST 2017
+Linux version 4.15.0-rc5-335113-g464e1d5f23cc (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sat Dec 23 21:03:22 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -372,15 +372,15 @@
 Loading compiled-in X.509 certificates
 mmc0: new high speed SDHC card at address aaaa
 usb1_vbus: supplied by vdd-sys-5v0
+mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 usb2_vbus: supplied by vdd-sys-5v0
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+ mmcblk0: p1 p2 p3
 [drm] No driver support for vblank timestamp query.
-mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
- mmcblk0: p1 p2 p3
 mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB, chardev (237:0)
  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
@@ -394,7 +394,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-05-10 10:37:53 UTC (957955073)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-05-16 12:06:04 UTC (958478764)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -406,5 +406,5 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.919142] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.939052] usb 1-1: new high-speed USB device number 2 using tegra-ehci
 asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:b5:16
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.078510910 -0800
+++ /tmp/foob	2017-12-23 21:19:37.082510929 -0800
@@ -40,18 +40,18 @@
 	 ###############################
 	 3.2 MiB/s
 done
-Bytes transferred = 6168112 (5e1e30 hex)
+Bytes transferred = 6168456 (5e1f88 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5e1e30 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5e1f88 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc4-14859-g1291a0d5 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Dec 17 19:32:55 PST 2017
+Linux version 4.15.0-rc5-15164-g464e1d5 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sat Dec 23 21:02:19 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -388,7 +388,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-05-10 10:35:13 UTC (957954913)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-05-16 12:03:22 UTC (958478602)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
@@ -406,4 +406,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.181359] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.191267] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.086510948 -0800
+++ /tmp/foob	2017-12-23 21:19:37.090510966 -0800
@@ -44,7 +44,7 @@
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 254.9 KiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc4-334808-g1291a0d5049d (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Dec 17 19:33:47 PST 2017
+Linux version 4.15.0-rc5-335113-g464e1d5f23cc (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sat Dec 23 21:03:22 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -398,6 +398,7 @@
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
 tegra-pcie 1003000.pcie: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517
+mmc0: new high speed MMC card at address 0001
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
 as3722-sd2: supplied by +5V_SYS
@@ -419,14 +420,8 @@
 +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV
 as3722-ldo11: supplied by +3.3V_RUN
 +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
-mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
-mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
-mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (237:0)
 tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
 tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
- mmcblk0: p1
 scsi host0: tegra-ahci
 scsi host1: tegra-ahci
 ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345
@@ -461,7 +456,6 @@
 pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
 pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits
 pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
-ata1: SATA link down (SStatus 0 SControl 300)
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
 pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits
 pci 0000:00:02.0: enabling Extended Tags
@@ -505,23 +499,18 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
 r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-mmc1: new high speed SDHC card at address aaaa
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x2525cef4, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x01f44176, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
- mmcblk1: p1 p2 p3
-tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
-Console: switching to colour frame buffer device 512x135
-drm drm: fb0:  frame buffer device
+[drm] Cannot find any crtc or sizes
 [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0
 iommu: Adding device cpufreq-dt.0 to group 74
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:44 UTC (946685084)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:58 UTC (946684918)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
@@ -530,12 +519,24 @@
 +3.3V_RUN_TOUCH: disabling
 +2.8V_RUN_CAM_AF: disabling
 +1.8V_RUN_VPP_FUSE: disabling
+ata1: SATA link down (SStatus 0 SControl 300)
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
+tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
+ mmcblk1: p1 p2 p3
+mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (237:0)
+ mmcblk0: p1
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
+VFS: Mounted root (ext3 filesystem) on device 179:17.
 devtmpfs: mounted
 Freeing unused kernel memory: 2048K
+Console: switching to colour frame buffer device 512x135
+drm drm: fb0:  frame buffer device
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.134511169 -0800
+++ /tmp/foob	2017-12-23 21:19:37.138511188 -0800
@@ -33,20 +33,20 @@
 	 #################################################################
 	 #################################################################
 	 ###############################
-	 4 MiB/s
+	 946.3 KiB/s
 done
-Bytes transferred = 6168112 (5e1e30 hex)
+Bytes transferred = 6168456 (5e1f88 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 927.7 KiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5e1e30 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5e1f88 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc4-14859-g1291a0d5 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Dec 17 19:32:55 PST 2017
+Linux version 4.15.0-rc5-15164-g464e1d5 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sat Dec 23 21:02:19 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -482,9 +482,9 @@
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
-pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff]
 mmc1: new high speed SDHC card at address aaaa
 mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
+pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff]
 pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
 pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
 pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit]
@@ -500,14 +500,14 @@
 pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
 pcieport 0000:00:01.0: enabling device (0140 -> 0142)
 pcieport 0000:00:01.0: Signaling PME with IRQ 395
-pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
  mmcblk1: p1 p2 p3
+pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
 pcieport 0000:00:02.0: enabling device (0140 -> 0143)
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
 r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x3ce6bb05, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x57c4e2e5, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -520,7 +520,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:13 UTC (946684813)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:19 UTC (946684819)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.146511224 -0800
+++ /tmp/foob	2017-12-23 21:19:37.150511243 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -33,20 +33,20 @@
 	 #################################################################
 	 #################################################################
 	 ##########################################
-	 4 MiB/s
+	 3.6 MiB/s
 done
-Bytes transferred = 6331800 (609d98 hex)
+Bytes transferred = 6332104 (609ec8 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 3.5 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x609d98 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x609ec8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc4-216567-g1291a0d5 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Dec 17 19:33:38 PST 2017
+Linux version 4.15.0-rc5-216872-g464e1d5 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sat Dec 23 21:02:59 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -486,14 +486,14 @@
 pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
 pci 0000:02:00.0: reg 0x10: [io  0x0000-0x00ff]
 pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
-mmc1: new high speed SDHC card at address aaaa
-mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 PCI: bus2: Fast back to back transfers disabled
 pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
 pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
 pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff]
 pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
+mmc1: new high speed SDHC card at address aaaa
+mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
 pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
 pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit]
 pci 0000:00:01.0: PCI bridge to [bus 01]
@@ -506,16 +506,16 @@
 pci 0000:00:02.0:   bridge window [mem 0x13100000-0x131fffff]
 pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
 pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
- mmcblk1: p1 p2 p3
 pcieport 0000:00:01.0: enabling device (0140 -> 0142)
 pcieport 0000:00:01.0: Signaling PME with IRQ 395
 pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
 pcieport 0000:00:02.0: enabling device (0140 -> 0143)
+ mmcblk1: p1 p2 p3
 pcieport 0000:00:02.0: Signaling PME with IRQ 396
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
 r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x9a496b53, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xa08b1c13, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -528,10 +528,11 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:30 UTC (946684950)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:39 UTC (946684959)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
+cfg80211: failed to load regulatory.db
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
@@ -543,7 +544,6 @@
 ALSA device list:
   #0: tegra-hda at 0x70038000 irq 346
   #1: NVIDIA Tegra Jetson TK1
-cfg80211: failed to load regulatory.db
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.170511335 -0800
+++ /tmp/foob	2017-12-23 21:19:37.174511354 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -52,7 +52,7 @@
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 2.7 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc4-334808-g1291a0d5049d (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Dec 17 19:33:47 PST 2017
+Linux version 4.15.0-rc5-335113-g464e1d5f23cc (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sat Dec 23 21:03:22 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -370,9 +370,9 @@
 mmc0: Unknown controller version (3). You may experience problems.
 mmc0: Invalid maximum block size, assuming 512 bytes
 elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
-input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
 ledtrig-cpu: registered to indicate activity on CPUs
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
 NET: Registered protocol family 10
@@ -380,6 +380,12 @@
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
 NET: Registered protocol family 17
 can: controller area network core (rev 20170425 abi 9)
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (237:0)
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 NET: Registered protocol family 29
 can: raw protocol (rev 20170425)
 can: broadcast manager protocol (rev 20170425 t)
@@ -388,7 +394,6 @@
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
-mmc0: new high speed MMC card at address 0001
 +3.3V_RUN: supplied by +3.3V_SYS
 +VDD_LED: supplied by +VDD_MUX
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
@@ -404,12 +409,14 @@
 +5V_HDMI_CON: supplied by +5V_SYS
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
  usb3-1: usb3-1 supply vbus not found, using dummy regulator
+elan_i2c 1-0015: failed to read report data: -121
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
 mmc1: Unknown controller version (3). You may experience problems.
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: Switching to 3.3V signalling voltage failed
+elan_i2c 1-0015: invalid report id data (ff)
 mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
@@ -417,10 +424,5 @@
 mmc2: Invalid maximum block size, assuming 512 bytes
 mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (237:0)
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.182511391 -0800
+++ /tmp/foob	2017-12-23 21:19:37.186511409 -0800
@@ -41,20 +41,20 @@
 	 #################################################################
 	 #################################################################
 	 ###############################
-	 3 MiB/s
+	 3.6 MiB/s
 done
-Bytes transferred = 6168112 (5e1e30 hex)
+Bytes transferred = 6168456 (5e1f88 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 2.8 MiB/s
+	 3.2 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5e1e30 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5e1f88 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc4-14859-g1291a0d5 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Dec 17 19:32:55 PST 2017
+Linux version 4.15.0-rc5-15164-g464e1d5 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sat Dec 23 21:02:19 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -308,7 +308,6 @@
 iommu: Adding device as3722-adc to group 66
 iommu: Adding device as3722-power-off to group 67
 iommu: Adding device as3722-wdt to group 68
-cros-ec-spi spi0.0: packet too long (249 bytes, expected 4)
 iommu: Adding device cros-ec-ctl.0.auto to group 69
 iommu: Adding device 7000d400.spi:cros-ec@0:i2c-tunnel to group 70
 iommu: Adding device 7000d400.spi:cros-ec@0:keyboard-controller to group 71
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.198511464 -0800
+++ /tmp/foob	2017-12-23 21:19:37.202511483 -0800
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -41,20 +41,20 @@
 	 #################################################################
 	 #################################################################
 	 ##########################################
-	 3.3 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 6331800 (609d98 hex)
+Bytes transferred = 6332104 (609ec8 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 2.7 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x609d98 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x609ec8 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc4-216567-g1291a0d5 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Dec 17 19:33:38 PST 2017
+Linux version 4.15.0-rc5-216872-g464e1d5 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sat Dec 23 21:02:59 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -308,7 +308,6 @@
 iommu: Adding device as3722-adc to group 66
 iommu: Adding device as3722-power-off to group 67
 iommu: Adding device as3722-wdt to group 68
-cros-ec-spi spi0.0: packet too long (249 bytes, expected 4)
 iommu: Adding device cros-ec-ctl.0.auto to group 69
 iommu: Adding device 7000d400.spi:cros-ec@0:i2c-tunnel to group 70
 iommu: Adding device 7000d400.spi:cros-ec@0:keyboard-controller to group 71
@@ -374,7 +373,6 @@
 mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (247:0)
 input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2
 NET: Registered protocol family 10
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 Segment Routing with IPv6
 mip6: Mobile IPv6
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
@@ -432,8 +430,8 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
 mmc2: Invalid maximum block size, assuming 512 bytes
-mmc1: new high speed SDIO card at address 0001
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+mmc1: new high speed SDIO card at address 0001
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.234511630 -0800
+++ /tmp/foob	2017-12-23 21:19:37.238511649 -0800
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801918 us
+Bootloader-Cpu Init at (time stamp): 1801817 us
 
 Pinmux changes applied in kernel way
 
@@ -62,22 +62,22 @@
 Board Id Read Time: 3 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801892  us
-Bootloader (AosInit) time: 734224 us
-Bootloader Main Init time: 188218 us
-BlockDevMgrInit time: 157612 us
+Miscellaneous avp time: 1801791  us
+Bootloader (AosInit) time: 734228 us
+Bootloader Main Init time: 180077 us
+BlockDevMgrInit time: 157532 us
 PartMgrInit time: 8 us
 StorMgrInit time: 30 us
 FsMgrInit time: 2 us
-Partition Table load: 76977 us 
-Display init time: 574538 us
+Partition Table load: 77184 us 
+Display init time: 574468 us
 Kernel read time: 1510 msec
 Load Kernel Size:   20013056 Bytes
 Bl Kernel ReadSpeed: 13253000 Bytes/sec
-Pre-Kernel Jump time: 4245482 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 9383449 us
+Pre-Kernel Jump time: 4245991 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 9378071 us
 Booting Linux on physical CPU 0x0000000000 [0x4e0f0000]
-Linux version 4.15.0-rc4-334808-g1291a0d5049d (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Dec 17 19:39:52 PST 2017
+Linux version 4.15.0-rc5-335113-g464e1d5f23cc (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sat Dec 23 21:09:29 PST 2017
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
 efi: Getting EFI parameters from FDT:
@@ -148,9 +148,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.132:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.128:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 0000000066cd75f0, 1 data @ 00000000902097b5)
+vdso: 2 pages (1 code @ 00000000dfdad800, 1 data @ 0000000073b95e3e)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -284,6 +284,8 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
 hctosys: unable to open rtc device (rtc0)
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +VDD_LED: disabling
 +5V_USB_HS: disabling
@@ -293,8 +295,6 @@
 ALSA device list:
   No soundcards found.
 Freeing unused kernel memory: 1088K
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
 
 System initialization...
 
Diff for ./tegra186-p2771-0000/tegra186-p2771-0000/defconfig%jetson-tx2_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.262511760 -0800
+++ /tmp/foob	2017-12-23 21:19:37.270511796 -0800
@@ -2,18 +2,51 @@
 
 Pass: Linux Boot Test 1
 	Test Owner(s): N/A
-	Execution Time 56.52 sec
+	Execution Time 56.51 sec
 	Percent passed so far: 50.0
 	
 
 
 Pass: Linux Boot Test 2
 	Test Owner(s): N/A
-	Execution Time 56.0 sec
+	Execution Time 55.95 sec
 	Percent passed so far: 100.0
 	
 
 Final Score: 100.0
+healthd: battery l=100 v=0 t=21.0 h=2 st=2 chg=a
+healthd: Charger state changed from disconnected to connected
+init: write_file: Unable to open '/proc/sys/vm/extra_free_kbytes': No such file or directory
+acc_open
+acc_release
+tegra_cec 3960000.tegra_cec: set logical address: 0x0
+tegra_cec 3960000.tegra_cec: set logical address: 0x0
+gpio tegra-gpio wake18 for gpio=101(M:5)
+IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
+tegra-xusb 3530000.xhci: exiting ELPG
+tegra-xusb 3530000.xhci: Firmware timestamp: 2017-10-31 06:33:14 UTC, Version: 55.08 debug
+tegra-xusb 3530000.xhci: exiting ELPG done
+tegra_cec 3960000.tegra_cec: set logical address: 0x10
+type=1400 audit(1482584342.736:8): avc: denied { write } for pid=3474 comm="Binder:3474_2" name="xt_quota" dev="proc" ino=4026532549 scontext=u:r:netd:s0 tcontext=u:object_r:proc_net:s0 tclass=dir permissive=1
+type=1400 audit(1482584342.736:9): avc: denied { add_name } for pid=3474 comm="Binder:3474_2" name="globalAlert" scontext=u:r:netd:s0 tcontext=u:object_r:proc_net:s0 tclass=dir permissive=1
+type=1400 audit(1482584342.736:10): avc: denied { create } for pid=3474 comm="Binder:3474_2" name="globalAlert" scontext=u:r:netd:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=1
+type=1400 audit(1482584342.736:11): avc: denied { associate } for pid=3474 comm="Binder:3474_2" name="globalAlert" scontext=u:object_r:proc_net:s0 tcontext=u:object_r:proc:s0 tclass=filesystem permissive=1
+nvdec 15480000.nvdec: fw name:nvhost_nvdec_bl030_prod.fw
+nvdec 15480000.nvdec: fw name:nvhost_nvdec030_prod.fw
+[TRUSTY] [secure_otf] C> te_create_instance_iface: OTF
+init: Service 'bootanim' (pid 3900) exited with status 0
+type=1400 audit(1482584344.328:12): avc: denied { add_name } for pid=1 comm="init" name="uevent_in_suspend" scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
+init: Starting service 'nvpmodel'...
+BOOT_COMPLETE
+init: cannot find '/system/xbin/qvs_post_boot.sh' (No such file or directory), disabling 'qvs_post_boot'
+init: cannot find '/data/boot_script.sh' (No such file or directory), disabling 'boot_script'
+init: Service 'nvpmodel' (pid 4390) exited with status 0
+type=1400 audit(1482584344.328:13): avc: denied { create } for pid=1 comm="init" name="uevent_in_suspend" scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
+tegra-xusb 3530000.xhci: entering ELPG
+tegra-xusb 3530000.xhci: entering ELPG done
+mtp_open
+eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control rx/tx
+IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
 I> Welcome to MB1 recovery(prd-version : 10.02.161215-t186-M-00.00-f24525c4)
 I> rst_source : 0x0
 I> rst_level : 0x0
@@ -32,7 +65,7 @@
 I> Version of mb1 bct binary 12
 W> MB1 BCT does not have controller prod config data
 I> Bootrom patch version : 31 (correctly patched)
-I> ATE fuse revision : 0x30880
+I> ATE fuse revision : 0x30080
 I> chip revision : A02P
 I> disabled_core_mask: 0xffffff0c
 I> Enabled Cores: 0xf3
@@ -97,8 +130,8 @@
 I> Loading preboot
 I> Binary(1) of size 59024 is loaded @ 0x40000000
 I> Restrict GSC#29 access to DPMU only
-I> Updated LSR_DVCOMP_PARAMS: 0xc07a0f45c
 I> Updated LSR_DVCOMP_PARAMS: 0xc07c0f85c
+I> Updated LSR_DVCOMP_PARAMS: 0xc07a0f45c
 I> WP0 triggered
 I> Waypoint-0 ACK received :)
 I> WP0.5 triggered
@@ -134,9 +167,9 @@
 I> pmic: reset reason (nverc)	: 0x10
 I> Reading GPT from 512 for device 00000003
 I> Reading GPT from 8388096 for device 00000003
-I> Found 6 partitions in 00000003 device
+I> Found 14 partitions in 00000003 device
 I> Reading GPT from 512 for device 00010003
-I> Found 18 partitions in 00010003 device
+I> Found 49 partitions in 00010003 device
 I> Binary(16) of size 524480 is loaded @ 0xf7600000
 I> Binary(17) of size 326672 is loaded @ 0xf77b03e0
 I> BPMP-FW load address = 0xf7600000
@@ -219,9 +252,9 @@
 I> sdmmc bdev is already initialized
 I> Reading GPT from 512 for device 00000003
 I> Reading GPT from 8388096 for device 00000003
-I> Found 6 partitions in 00000003 device
+I> Found 14 partitions in 00000003 device
 I> Reading GPT from 512 for device 00010003
-I> Found 18 partitions in 00010003 device
+I> Found 49 partitions in 00010003 device
 I> Recovery boot_type: 0
 I> Entering 3p server
 I> Entering into 3p server..
@@ -490,11 +523,11 @@
 I> Enabling gpio chip_id = 2, gpio pin = 9
 I> Disabling gpio chip_id = 2, gpio pin = 9
 I> Device at /i2c@3180000:0x54
-I> create_pm_ids: id: 3310-1000-B00-E, len: 15
+I> create_pm_ids: id: 3310-1000-B00-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-B, len: 15
+I> create_pm_ids: id: 2597-0000-500-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3326-1000-100-M, len: 15
+I> create_pm_ids: id: 3326-1000-000-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
 initializing target

 calling apps_init()

@@ -515,42 +548,42 @@
 I> Kernel DTB @ 0x92000000
 I> Verified boot state = Orange
 E> tegrabl_display_clear: display is not initialized
-I> Checking boot.img header magic ... [0001.775] I> [OK]
+I> Checking boot.img header magic ... [0001.774] I> [OK]
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
-I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.792] I> Done
-I> Move ramdisk (len: 6265240) from 0xa8072800 to 0x98000000
+I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.791] I> Done
+I> Move ramdisk (len: 6265207) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f9998
+I> Ramdisk: Base: 0x98000000; Size: 0x5f9977
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0320817136337
+I> add_serialno: Serial Num = 0330117020719
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2583/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817136337 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2383/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0330117020719 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:55:32
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:55:33
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:55:34
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:81:c7:e9
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:81:c7:ea
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:81:c7:eb
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
-I> create_pm_ids: id: 3310-1000-B00-E, len: 15
+I> create_pm_ids: id: 3310-1000-B00-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-B, len: 15
+I> create_pm_ids: id: 2597-0000-500-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3326-1000-100-M, len: 15
+I> create_pm_ids: id: 3326-1000-000-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
 I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50
 E> "i2c@c250000" doesn't exist, creating 
 E> "module@0x50" doesn't exist, creating 
-I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57
+I> Adding plugin-manager/ids/2597-0000-500=/i2c@c250000:module@0x57
 E> "module@0x57" doesn't exist, creating 
-I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54
+I> Adding plugin-manager/ids/3326-1000-000=/i2c@3180000:module@0x54
 E> "i2c@3180000" doesn't exist, creating 
 E> "module@0x54" doesn't exist, creating 
-I> Adding plugin-manager/ids/3310-1000-B00-E
+I> Adding plugin-manager/ids/3310-1000-B00-B
 I> Adding plugin-manager/configs/3310-mem-type 00
 I> Adding plugin-manager/configs/3310-power-config 00
 I> Adding plugin-manager/configs/3310-misc-config 00
@@ -579,7 +612,7 @@
 Out:   serial
 Err:   serial
 Net:   eth0: ethernet@2490000
-Hit any key to stop autoboot:  2 [0000.182] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
+Hit any key to stop autoboot:  2 [0000.183] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
 I> Default Heap @ [0xd486400 - 0xd488400]
 I> DMA Heap @ [0x84900000 - 0x85300000]
 I> bit @ 0xd480000
@@ -756,11 +789,11 @@
 I> Enabling gpio chip_id = 2, gpio pin = 9
 I> Disabling gpio chip_id = 2, gpio pin = 9
 I> Device at /i2c@3180000:0x54
-I> create_pm_ids: id: 3310-1000-B00-E, len: 15
+I> create_pm_ids: id: 3310-1000-B00-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-B, len: 15
+I> create_pm_ids: id: 2597-0000-500-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3326-1000-100-M, len: 15
+I> create_pm_ids: id: 3326-1000-000-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
 initializing target

 calling apps_init()

@@ -781,42 +814,42 @@
 I> Kernel DTB @ 0x92000000
 I> Verified boot state = Orange
 E> tegrabl_display_clear: display is not initialized
-I> Checking boot.img header magic ... [0001.776] I> [OK]
+I> Checking boot.img header magic ... [0001.778] I> [OK]
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
-I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.793] I> Done
-I> Move ramdisk (len: 6265240) from 0xa8072800 to 0x98000000
+I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.795] I> Done
+I> Move ramdisk (len: 6265207) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f9998
+I> Ramdisk: Base: 0x98000000; Size: 0x5f9977
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0320817136337
+I> add_serialno: Serial Num = 0330117020719
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2583/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817136337 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2383/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0330117020719 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:55:32
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:55:33
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:55:34
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:81:c7:e9
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:81:c7:ea
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:81:c7:eb
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
-I> create_pm_ids: id: 3310-1000-B00-E, len: 15
+I> create_pm_ids: id: 3310-1000-B00-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-B, len: 15
+I> create_pm_ids: id: 2597-0000-500-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3326-1000-100-M, len: 15
+I> create_pm_ids: id: 3326-1000-000-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
 I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50
 E> "i2c@c250000" doesn't exist, creating 
 E> "module@0x50" doesn't exist, creating 
-I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57
+I> Adding plugin-manager/ids/2597-0000-500=/i2c@c250000:module@0x57
 E> "module@0x57" doesn't exist, creating 
-I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54
+I> Adding plugin-manager/ids/3326-1000-000=/i2c@3180000:module@0x54
 E> "i2c@3180000" doesn't exist, creating 
 E> "module@0x54" doesn't exist, creating 
-I> Adding plugin-manager/ids/3310-1000-B00-E
+I> Adding plugin-manager/ids/3310-1000-B00-B
 I> Adding plugin-manager/configs/3310-mem-type 00
 I> Adding plugin-manager/configs/3310-power-config 00
 I> Adding plugin-manager/configs/3310-misc-config 00
@@ -853,17 +886,17 @@
 Scanning mmc 0:1...
 Found /boot/extlinux/extlinux.conf
 Retrieving file: /boot/extlinux/extlinux.conf
-431 bytes read in 65 ms (5.9 KiB/s)
+431 bytes read in 70 ms (5.9 KiB/s)
 p2771-0000 NFS boot options
 1:	primary kernel
 Enter choice: 1:	primary kernel
 Retrieving file: /boot/initrd
-6265240 bytes read in 210 ms (28.5 MiB/s)
+6265207 bytes read in 201 ms (29.7 MiB/s)
 Retrieving file: /boot/Image
-16646656 bytes read in 441 ms (36 MiB/s)
-append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2583/nfsroot,nolock,nfsvers=2 rootwait
+16646656 bytes read in 442 ms (35.9 MiB/s)
+append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2383/nfsroot,nolock,nfsvers=2 rootwait
 Retrieving file: /boot/tegra186-p2771-0000.dtb
-17547 bytes read in 56 ms (305.7 KiB/s)
+17547 bytes read in 61 ms (280.3 KiB/s)
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Using Device Tree in place at 0000000082000000, end 000000008200748a
@@ -973,8 +1006,8 @@
 mmc2: Switching to 3.3V signalling voltage failed
 mmc2: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-max77686-rtc max77620-rtc: setting system clock to 2016-09-04 09:18:06 UTC (1472980686)
-dwc-eth-dwmac 2490000.ethernet eth0: device MAC address a2:80:da:b2:90:c1
+max77686-rtc max77620-rtc: setting system clock to 2016-12-24 13:01:41 UTC (1482584501)
+dwc-eth-dwmac 2490000.ethernet eth0: device MAC address 0e:3c:97:dc:17:66
 Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
 dwmac4: Master AXI performs any burst length
 dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
@@ -987,7 +1020,7 @@
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
 dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
 IP-Config: Complete:
-     device=eth0, hwaddr=a2:80:da:b2:90:c1, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
+     device=eth0, hwaddr=0e:3c:97:dc:17:66, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
      host=192.168.99.2, domain=, nis-domain=(none)
      bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
 VDD_RTC: disabling
@@ -997,7 +1030,7 @@
   No soundcards found.
 Freeing unused kernel memory: 1088K
 /init: line 58: chmod: command not found
-L4T-INITRD Build DATE: Sun Sep  4 09:18:09 UTC 2016
+L4T-INITRD Build DATE: Sat Dec 24 13:01:45 UTC 2016
 Root device found: nfs
 Ethernet interfaces: eth0
 IP Address: 192.168.99.2
@@ -1009,68 +1042,68 @@
 Welcome to [1mUbuntu 16.04 LTS[0m!
 
 systemd[1]: Set hostname to <tegra-ubuntu>.
+systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
+Started Dispatch Password Requests to Console Directory Watch.
 systemd[1]: Created slice System Slice.
 Created slice System Slice.
+systemd[1]: Listening on Journal Socket (/dev/log).
+Listening on Journal Socket (/dev/log).
 systemd[1]: Created slice system-getty.slice.
 Created slice system-getty.slice.
 systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
 Listening on /dev/initctl Compatibility Named Pipe.
-systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
-Started Dispatch Password Requests to Console Directory Watch.
-systemd[1]: Reached target Swap.
-Reached target Swap.
-systemd[1]: Created slice system-serial\x2dgetty.slice.
-Created slice system-serial\x2dgetty.slice.
-systemd[1]: Reached target Encrypted Volumes.
-Reached target Encrypted Volumes.
-Listening on Journal Socket (/dev/log).
+systemd[1]: Listening on Journal Audit Socket.
+Listening on Journal Audit Socket.
+systemd[1]: Listening on udev Control Socket.
 Listening on udev Control Socket.
 Created slice User and Session Slice.
 Reached target Slices.
+Created slice system-serial\x2dgetty.slice.
+Reached target Encrypted Volumes.
+Listening on Syslog Socket.
 Started Forward Password Requests to Wall Directory Watch.
 Reached target Paths.
 Listening on udev Kernel Socket.
-Listening on Journal Audit Socket.
-Listening on Syslog Socket.
+Reached target Swap.
 Listening on Journal Socket.
-         Starting Create Static Device Nodes in /dev...
-         Mounting Huge Pages File System...
-         Starting Remount Root and Kernel File Systems...
-         Mounting Debug File System...
          Mounting RPC Pipe File System...
-         Starting Load Kernel Modules...
          Starting Journal Service...
+         Starting Remount Root and Kernel File Systems...
+         Starting Load Kernel Modules...
+         Mounting Huge Pages File System...
          Mounting POSIX Message Queue File System...
+         Mounting Debug File System...
+         Starting Create Static Device Nodes in /dev...
 Mounted Huge Pages File System.
 Mounted Debug File System.
-Mounted RPC Pipe File System.
 Mounted POSIX Message Queue File System.
+Mounted RPC Pipe File System.
+Started Journal Service.
 Started Remount Root and Kernel File Systems.
 Started Load Kernel Modules.
-         Mounting Configuration File System...
          Starting Apply Kernel Variables...
-         Starting udev Coldplug all Devices...
+         Mounting Configuration File System...
          Starting Load/Save Random Seed...
+         Starting udev Coldplug all Devices...
+         Starting Flush Journal to Persistent Storage...
 Mounted Configuration File System.
-Started Journal Service.
 Started Create Static Device Nodes in /dev.
+Started Apply Kernel Variables.
+Started Load/Save Random Seed.
+systemd-journald[1482]: Received request to flush runtime journal from PID 1
 Reached target Local File Systems (Pre).
 Reached target Local File Systems.
-         Starting Preprocess NFS configuration...
+         Starting Raise network interfaces...
          Starting Set console keymap...
+         Starting Preprocess NFS configuration...
          Starting udev Kernel Device Manager...
-         Starting Flush Journal to Persistent Storage...
-Started Apply Kernel Variables.
-Started Load/Save Random Seed.
+Started Flush Journal to Persistent Storage.
 Failed to start Set console keymap.
 See 'systemctl status console-setup.service' for details.
 Started Preprocess NFS configuration.
-systemd-journald[1492]: Received request to flush runtime journal from PID 1
 Reached target NFS client services.
 Reached target Remote File Systems (Pre).
 Reached target Remote File Systems.
-         Starting Raise network interfaces...
-Started Flush Journal to Persistent Storage.
          Starting Create Volatile Files and Directories...
 Started udev Coldplug all Devices.
 Started udev Kernel Device Manager.
@@ -1079,34 +1112,34 @@
 Started Raise network interfaces.
 Reached target Network.
 Reached target Network is Online.
-         Starting Update UTMP about System Boot/Shutdown...
 Reached target System Time Synchronized.
+         Starting Update UTMP about System Boot/Shutdown...
 Started Update UTMP about System Boot/Shutdown.
 Reached target System Initialization.
-Listening on RPCbind Server Activation Socket.
-Started Daily Cleanup of Temporary Directories.
-Started Daily apt activities.
-Reached target Timers.
 Listening on D-Bus System Message Bus Socket.
+Started Daily Cleanup of Temporary Directories.
+Listening on RPCbind Server Activation Socket.
 Reached target Sockets.
 Reached target Basic System.
-         Starting Permit User Sessions...
          Starting LSB: Start NTP daemon...
-Started Regular background program processing daemon.
-         Starting OpenBSD Secure Shell server...
-         Starting /etc/rc.local Compatibility...
          Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
+         Starting Permit User Sessions...
          Starting System Logging Service...
+Started Regular background program processing daemon.
          Starting Login Service...
+         Starting OpenBSD Secure Shell server...
 Started D-Bus System Message Bus.
+Started Daily apt activities.
+Reached target Timers.
+         Starting /etc/rc.local Compatibility...
 Started System Logging Service.
 Started Permit User Sessions.
 Started /etc/rc.local Compatibility.
 Started Getty on tty1.
 Started Serial Getty on ttyS0.
 Reached target Login Prompts.
-Started Login Service.
 Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
+Started Login Service.
 Started OpenBSD Secure Shell server.
 Started LSB: Start NTP daemon.
 Reached target Multi-User System.
@@ -1116,7 +1149,7 @@
 

 Ubuntu 16.04 LTS tegra-ubuntu ttyS0
 
-tegra-ubuntu login: [0000.182] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
+tegra-ubuntu login: [0000.183] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mobile-f4c42291)
 I> Default Heap @ [0xd486400 - 0xd488400]
 I> DMA Heap @ [0x84900000 - 0x85300000]
 I> bit @ 0xd480000
@@ -1293,11 +1326,11 @@
 I> Enabling gpio chip_id = 2, gpio pin = 9
 I> Disabling gpio chip_id = 2, gpio pin = 9
 I> Device at /i2c@3180000:0x54
-I> create_pm_ids: id: 3310-1000-B00-E, len: 15
+I> create_pm_ids: id: 3310-1000-B00-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-B, len: 15
+I> create_pm_ids: id: 2597-0000-500-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3326-1000-100-M, len: 15
+I> create_pm_ids: id: 3326-1000-000-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
 initializing target

 calling apps_init()

@@ -1318,42 +1351,42 @@
 I> Kernel DTB @ 0x92000000
 I> Verified boot state = Orange
 E> tegrabl_display_clear: display is not initialized
-I> Checking boot.img header magic ... [0001.777] I> [OK]
+I> Checking boot.img header magic ... [0001.778] I> [OK]
 I> Valid boot.img @ 0xa8000000
 I> decompressor handler not found
-I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.794] I> Done
-I> Move ramdisk (len: 6265240) from 0xa8072800 to 0x98000000
+I> Copying kernel image (465664 bytes) from 0xa8000800 to 0x80080000 ... [0001.795] I> Done
+I> Move ramdisk (len: 6265207) from 0xa8072800 to 0x98000000
 I> Updated bpmp info to DTB
-I> Ramdisk: Base: 0x98000000; Size: 0x5f9998
+I> Ramdisk: Base: 0x98000000; Size: 0x5f9977
 I> Updated initrd info to DTB
 I> disabled_core_mask: 0xffffff0c
 I> Kernel type = Normal
-I> add_serialno: Serial Num = 0320817136337
+I> add_serialno: Serial Num = 0330117020719
 W> No valid slot number is found in scratch register
 W> Return default slot: _a
-I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2583/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0320817136337 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
+I> Linux Cmdline: root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2383/nfsroot fbcon=map:0 net.ifnames=0 console=tty0 OS=l4t console=ttyS0,115200n8 memtype=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x03100000 nvdumper_reserved=0xf7fc0000 gpt androidboot.secureos=none tegraid=18.1.2.0.0 tegra_keep_boot_clocks maxcpus=6 android.kerneltype=normal androidboot.serialno=0330117020719 androidboot.security=non-secure sdhci_tegra.en_boot_part_access=1 
 I> Updated bootarg info to DTB
-I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:8c:55:32
-I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:8c:55:33
-I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:8c:55:34
+I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:81:c7:e9
+I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:81:c7:ea
+I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:81:c7:eb
 E> "ids" doesn't exist, creating 
 E> "connection" doesn't exist, creating 
 E> "configs" doesn't exist, creating 
-I> create_pm_ids: id: 3310-1000-B00-E, len: 15
+I> create_pm_ids: id: 3310-1000-B00-B, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 2597-0000-501-B, len: 15
+I> create_pm_ids: id: 2597-0000-500-C, len: 15
 I> config: mem-type:00,power-config:00,misc-config:00,modem-config:00,touch-config:00,display-config:00,, len: 93
-I> create_pm_ids: id: 3326-1000-100-M, len: 15
+I> create_pm_ids: id: 3326-1000-000-M, len: 15
 I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:ff,touch-config:ff,display-config:ff,, len: 93
 I> Adding plugin-manager/ids/3310-1000-B00=/i2c@c250000:module@0x50
 E> "i2c@c250000" doesn't exist, creating 
 E> "module@0x50" doesn't exist, creating 
-I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57
+I> Adding plugin-manager/ids/2597-0000-500=/i2c@c250000:module@0x57
 E> "module@0x57" doesn't exist, creating 
-I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54
+I> Adding plugin-manager/ids/3326-1000-000=/i2c@3180000:module@0x54
 E> "i2c@3180000" doesn't exist, creating 
 E> "module@0x54" doesn't exist, creating 
-I> Adding plugin-manager/ids/3310-1000-B00-E
+I> Adding plugin-manager/ids/3310-1000-B00-B
 I> Adding plugin-manager/configs/3310-mem-type 00
 I> Adding plugin-manager/configs/3310-power-config 00
 I> Adding plugin-manager/configs/3310-misc-config 00
@@ -1384,23 +1417,23 @@
 Net:   eth0: ethernet@2490000
 Hit any key to stop autoboot:  2  1  0 
 MMC: no card present
-mmc_init: -123, time 1
+mmc_init: -123, time 0
 switch to partitions #0, OK
 mmc0(part 0) is current device
 Scanning mmc 0:1...
 Found /boot/extlinux/extlinux.conf
 Retrieving file: /boot/extlinux/extlinux.conf
-431 bytes read in 65 ms (5.9 KiB/s)
+431 bytes read in 70 ms (5.9 KiB/s)
 p2771-0000 NFS boot options
 1:	primary kernel
 Enter choice: 1:	primary kernel
 Retrieving file: /boot/initrd
-6265240 bytes read in 210 ms (28.5 MiB/s)
+6265207 bytes read in 201 ms (29.7 MiB/s)
 Retrieving file: /boot/Image
 16646656 bytes read in 441 ms (36 MiB/s)
-append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2583/nfsroot,nolock,nfsvers=2 rootwait
+append: console=ttyS0,115200n8 earlycon ignore_loglevel root=/dev/nfs rw netdevwait ip=192.168.99.2:192.168.99.1:192.168.99.1:255.255.255.0::eth0:off nfsroot=192.168.99.1:/home/ausvrl2383/nfsroot,nolock,nfsvers=2 rootwait
 Retrieving file: /boot/tegra186-p2771-0000.dtb
-17547 bytes read in 56 ms (305.7 KiB/s)
+17547 bytes read in 60 ms (285.2 KiB/s)
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Using Device Tree in place at 0000000082000000, end 000000008200748a
@@ -1510,8 +1543,8 @@
 mmc2: Switching to 3.3V signalling voltage failed
 mmc2: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
-max77686-rtc max77620-rtc: setting system clock to 2016-09-04 09:19:08 UTC (1472980748)
-dwc-eth-dwmac 2490000.ethernet eth0: device MAC address 12:c2:54:43:9d:ff
+max77686-rtc max77620-rtc: setting system clock to 2016-12-24 13:02:42 UTC (1482584562)
+dwc-eth-dwmac 2490000.ethernet eth0: device MAC address e2:5d:6a:d8:00:10
 Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
 dwmac4: Master AXI performs any burst length
 dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
@@ -1524,7 +1557,7 @@
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
 dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
 IP-Config: Complete:
-     device=eth0, hwaddr=12:c2:54:43:9d:ff, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
+     device=eth0, hwaddr=e2:5d:6a:d8:00:10, ipaddr=192.168.99.2, mask=255.255.255.0, gw=192.168.99.1
      host=192.168.99.2, domain=, nis-domain=(none)
      bootserver=192.168.99.1, rootserver=192.168.99.1, rootpath=
 VDD_RTC: disabling
@@ -1534,7 +1567,7 @@
   No soundcards found.
 Freeing unused kernel memory: 1088K
 /init: line 58: chmod: command not found
-L4T-INITRD Build DATE: Sun Sep  4 09:19:11 UTC 2016
+L4T-INITRD Build DATE: Sat Dec 24 13:02:46 UTC 2016
 Root device found: nfs
 Ethernet interfaces: eth0
 IP Address: 192.168.99.2
@@ -1546,64 +1579,64 @@
 Welcome to [1mUbuntu 16.04 LTS[0m!
 
 systemd[1]: Set hostname to <tegra-ubuntu>.
-systemd[1]: Created slice User and Session Slice.
-Created slice User and Session Slice.
-systemd[1]: Reached target Encrypted Volumes.
-Reached target Encrypted Volumes.
-systemd[1]: Listening on Syslog Socket.
-Listening on Syslog Socket.
+systemd[1]: Listening on Journal Audit Socket.
+Listening on Journal Audit Socket.
+systemd[1]: Listening on udev Control Socket.
+Listening on udev Control Socket.
 systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
 Listening on /dev/initctl Compatibility Named Pipe.
-systemd[1]: Started Forward Password Requests to Wall Directory Watch.
-Started Forward Password Requests to Wall Directory Watch.
-systemd[1]: Listening on Journal Socket.
+systemd[1]: Listening on Journal Socket (/dev/log).
+Listening on Journal Socket (/dev/log).
+systemd[1]: Reached target Encrypted Volumes.
+Reached target Encrypted Volumes.
+systemd[1]: Reached target Swap.
+Reached target Swap.
+systemd[1]: Created slice User and Session Slice.
+Created slice User and Session Slice.
 Listening on Journal Socket.
-systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
+Started Forward Password Requests to Wall Directory Watch.
+Listening on udev Kernel Socket.
+Listening on Syslog Socket.
 Started Dispatch Password Requests to Console Directory Watch.
 Reached target Paths.
-Reached target Swap.
 Created slice System Slice.
-Created slice system-serial\x2dgetty.slice.
          Mounting Debug File System...
+         Mounting Huge Pages File System...
+Created slice system-serial\x2dgetty.slice.
+Reached target Slices.
          Starting Remount Root and Kernel File Systems...
+         Starting Load Kernel Modules...
 Created slice system-getty.slice.
+         Starting Journal Service...
          Mounting RPC Pipe File System...
-         Starting Load Kernel Modules...
-         Starting Create Static Device Nodes in /dev...
-         Mounting Huge Pages File System...
          Mounting POSIX Message Queue File System...
-Reached target Slices.
-Listening on udev Control Socket.
-Listening on Journal Audit Socket.
-Listening on udev Kernel Socket.
-Listening on Journal Socket (/dev/log).
-         Starting Journal Service...
+         Starting Create Static Device Nodes in /dev...
 Mounted Huge Pages File System.
 Mounted Debug File System.
 Mounted POSIX Message Queue File System.
 Mounted RPC Pipe File System.
+Started Journal Service.
 Started Remount Root and Kernel File Systems.
 Started Load Kernel Modules.
 Started Create Static Device Nodes in /dev.
-Started Journal Service.
          Starting udev Kernel Device Manager...
-         Starting Apply Kernel Variables...
          Mounting Configuration File System...
-         Starting Load/Save Random Seed...
+         Starting Apply Kernel Variables...
          Starting udev Coldplug all Devices...
 Reached target Local File Systems (Pre).
+         Starting Load/Save Random Seed...
 Reached target Local File Systems.
-         Starting Preprocess NFS configuration...
          Starting Set console keymap...
+         Starting Preprocess NFS configuration...
          Starting Flush Journal to Persistent Storage...
 Mounted Configuration File System.
 Started udev Kernel Device Manager.
 Started Apply Kernel Variables.
 Started Load/Save Random Seed.
-Started Preprocess NFS configuration.
 Failed to start Set console keymap.
 See 'systemctl status console-setup.service' for details.
-systemd-journald[1496]: Received request to flush runtime journal from PID 1
+Started Preprocess NFS configuration.
+systemd-journald[1489]: Received request to flush runtime journal from PID 1
 Reached target NFS client services.
 Reached target Remote File Systems (Pre).
 Reached target Remote File Systems.
@@ -1621,28 +1654,28 @@
 Started Update UTMP about System Boot/Shutdown.
 Reached target System Initialization.
 Started Daily Cleanup of Temporary Directories.
-Listening on D-Bus System Message Bus Socket.
 Listening on RPCbind Server Activation Socket.
+Listening on D-Bus System Message Bus Socket.
 Reached target Sockets.
+Started Daily apt activities.
+Reached target Timers.
 Reached target Basic System.
          Starting OpenBSD Secure Shell server...
+         Starting Permit User Sessions...
+         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
+Started Regular background program processing daemon.
          Starting System Logging Service...
          Starting /etc/rc.local Compatibility...
-         Starting Permit User Sessions...
          Starting LSB: Start NTP daemon...
-Started D-Bus System Message Bus.
          Starting Login Service...
-Started Daily apt activities.
-Reached target Timers.
-Started Regular background program processing daemon.
-         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
+Started D-Bus System Message Bus.
 Started System Logging Service.
-Started /etc/rc.local Compatibility.
 Started Permit User Sessions.
-Started OpenBSD Secure Shell server.
+Started /etc/rc.local Compatibility.
 Started Serial Getty on ttyS0.
 Started Getty on tty1.
 Reached target Login Prompts.
+Started OpenBSD Secure Shell server.
 Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
 Started Login Service.
 Started LSB: Start NTP daemon.
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.278511834 -0800
+++ /tmp/foob	2017-12-23 21:19:37.278511834 -0800
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -48,7 +48,7 @@
 	 #################################################################
 	 #################################################################
 	 ##############################
-	 4 MiB/s
+	 4.1 MiB/s
 done
 Bytes transferred = 8061440 (7b0200 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc4-334808-g1291a0d5049d (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Dec 17 19:33:47 PST 2017
+Linux version 4.15.0-rc5-335113-g464e1d5f23cc (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sat Dec 23 21:03:22 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -267,7 +267,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x2d025896, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xc634a754, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -339,8 +339,8 @@
 Loading compiled-in X.509 certificates
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
-tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 usb 1-1: new high-speed USB device number 2 using tegra-ehci
+tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
 mmc1: new high speed SD card at address b368
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.302511944 -0800
+++ /tmp/foob	2017-12-23 21:19:37.306511963 -0800
@@ -48,7 +48,7 @@
 	 ###############################
 	 4.1 MiB/s
 done
-Bytes transferred = 6168112 (5e1e30 hex)
+Bytes transferred = 6168456 (5e1f88 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -59,7 +59,7 @@
 done
 Bytes transferred = 21160 (52a8 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5e1e30 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5e1f88 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024102a7
@@ -67,7 +67,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc4-14859-g1291a0d5 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Dec 17 19:32:55 PST 2017
+Linux version 4.15.0-rc5-15164-g464e1d5 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sat Dec 23 21:02:19 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -257,7 +257,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xddfdc054, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xad7e300e, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -328,26 +328,26 @@
 Key type dns_resolver registered
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
-utmi_phy_clk_enable: timeout waiting for phy to stabilize
 mmc1: new high speed SD card at address b368
+utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
- mmcblk1: p1 p2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+ mmcblk1: p1 p2
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
-cfg80211: Loading compiled-in X.509 certificates for regulatory database
 hub 1-1:1.0: USB hub found
-hub 1-1:1.0: 4 ports detected
+cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
 cfg80211: failed to load regulatory.db
 ALSA device list:
   #0: tegra-trimslice
+hub 1-1:1.0: 4 ports detected
 Waiting for root device PARTUUID=11eb23c1-01...
 usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 mmc0: host does not support reading read-only switch, assuming write-enable
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig%jetson-tx1_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.330512073 -0800
+++ /tmp/foob	2017-12-23 21:19:37.330512073 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 734096 us
-Basic modules init took 348709 us
+Tegraboot started after 780167 us
+Basic modules init took 348490 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14367 us
-Carveout took 252686 us
-CPU initialization took 92425 us
-Total time taken by TegraBoot 708187 us
+Next stage binary read took 14369 us
+Carveout took 252671 us
+CPU initialization took 92458 us
+Total time taken by TegraBoot 707988 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.573] LPDDR4 Training: Number of tables = 10
+64b[0001.618] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,9 +117,9 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig%jetson-tx1
-16710144 bytes read in 852 ms (18.7 MiB/s)
+16710144 bytes read in 858 ms (18.6 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-44764 bytes read in 453 ms (95.7 KiB/s)
+44764 bytes read in 454 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
 1627787 bytes read in 495 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc4-14859-g1291a0d5 (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Dec 17 19:36:49 PST 2017
+Linux version 4.15.0-rc5-15164-g464e1d5 (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sat Dec 23 21:06:04 PST 2017
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -233,7 +233,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.268:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000d1347484, 1 data @ 00000000b6d94819)
+vdso: 2 pages (1 code @ 0000000070e16681, 1 data @ 00000000d85ea7c1)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.338512110 -0800
+++ /tmp/foob	2017-12-23 21:19:37.342512129 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 768557 us
-Basic modules init took 351246 us
+Tegraboot started after 856054 us
+Basic modules init took 348488 us
 Sec Bootdevice Read Time = 203 ms, Read Size = 8459 KB
-Next stage binary read took 14365 us
-Carveout took 252663 us
-CPU initialization took 92434 us
-Total time taken by TegraBoot 710708 us
+Next stage binary read took 14832 us
+Carveout took 252669 us
+CPU initialization took 92455 us
+Total time taken by TegraBoot 708444 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.609] LPDDR4 Training: Number of tables = 10
+64b[0001.693] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,11 +117,11 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-16513536 bytes read in 835 ms (18.9 MiB/s)
+16513536 bytes read in 829 ms (19 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
-44764 bytes read in 453 ms (95.7 KiB/s)
+44764 bytes read in 454 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 495 ms (3.1 MiB/s)
+1627787 bytes read in 494 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc4-334808-g1291a0d5049d (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Dec 17 19:39:52 PST 2017
+Linux version 4.15.0-rc5-335113-g464e1d5f23cc (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sat Dec 23 21:09:29 PST 2017
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -233,7 +233,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.268:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 000000003d9c1c30, 1 data @ 00000000766cd6b9)
+vdso: 2 pages (1 code @ 000000003323e64e, 1 data @ 0000000032598824)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
Diff for ./tegra210-p2371-2180/tegra210-p2371-2180/defconfig%jetson-tx1_log.txt
Binary files /tmp/fooa and /tmp/foob differ
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.366512240 -0800
+++ /tmp/foob	2017-12-23 21:19:37.370512258 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc4-334808-g1291a0d5049d (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sun Dec 17 19:39:52 PST 2017
+Linux version 4.15.0-rc5-335113-g464e1d5f23cc (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Sat Dec 23 21:09:29 PST 2017
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -109,7 +109,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 0000000048bcf448, 1 data @ 000000000ea0e93b)
+vdso: 2 pages (1 code @ 0000000024916550, 1 data @ 0000000025e0df44)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -265,7 +265,7 @@
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB, chardev (240:0)
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
-max77686-rtc max77620-rtc: setting system clock to 2001-09-28 09:10:02 UTC (1001668202)
+max77686-rtc max77620-rtc: setting system clock to 2001-10-04 10:39:50 UTC (1002191990)
 PP1200_AVDD: disabling
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
@@ -276,8 +276,8 @@
 PP1800_CAM: disabling
 ALSA device list:
   No soundcards found.
-tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 Freeing unused kernel memory: 1088K
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 
 System initialization...
 
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.374512276 -0800
+++ /tmp/foob	2017-12-23 21:19:37.378512295 -0800
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ##############################
-	 3.3 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 8061440 (7b0200 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
@@ -49,7 +49,7 @@
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.1 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc4-334808-g1291a0d5049d (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Dec 17 19:33:47 PST 2017
+Linux version 4.15.0-rc5-335113-g464e1d5f23cc (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sat Dec 23 21:03:22 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -433,7 +433,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x89a7e05d, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xd3f3fcf9, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -464,4 +464,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.514070] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.504110] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-23 21:19:37.386512332 -0800
+++ /tmp/foob	2017-12-23 21:19:37.386512332 -0800
@@ -40,18 +40,18 @@
 	 ###############################
 	 3.2 MiB/s
 done
-Bytes transferred = 6168112 (5e1e30 hex)
+Bytes transferred = 6168456 (5e1f88 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.1 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5e1e30 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5e1f88 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc4-14859-g1291a0d5 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Dec 17 19:32:55 PST 2017
+Linux version 4.15.0-rc5-15164-g464e1d5 (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sat Dec 23 21:02:19 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -427,7 +427,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0x8760f5f3, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xb172de40, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -462,6 +462,7 @@
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
 Freeing unused kernel memory: 1024K
+usb 2-1: new high-speed USB device number 2 using tegra-ehci
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+root@(none):/# [    5.398480] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
