U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.tegra_defconfig%tegra-fw'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################## 4 MiB/s done Bytes transferred = 6331800 (609d98 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.7 MiB/s done Bytes transferred = 66544 (103f0 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x609d98 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 830133ef Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.0-rc4-216567-g1291a0d5 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Sun Dec 17 19:33:38 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0xfbc00000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] Normal zone: 1536 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @(ptrval) s39104 r8192 d22336 u69632 [ 0.000000] pcpu-alloc: s39104 r8192 d22336 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1997468K/2096128K available (9216K kernel code, 777K rwdata, 2820K rodata, 1024K init, 299K bss, 33124K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 778 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 300 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.007468] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.016996] Switching to timer-based delay loop, resolution 1000ns [ 0.024241] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.029220] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.039968] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.047936] Switching to timer-based delay loop, resolution 83ns [ 0.054404] Console: colour dummy device 80x30 [ 0.058352] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.068661] pid_max: default: 32768 minimum: 301 [ 0.073741] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.079847] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.087694] CPU: Testing write buffer coherency: ok [ 0.092012] /cpus/cpu@0 missing clock-frequency property [ 0.097018] /cpus/cpu@1 missing clock-frequency property [ 0.102329] /cpus/cpu@2 missing clock-frequency property [ 0.107594] /cpus/cpu@3 missing clock-frequency property [ 0.112865] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.152977] Setting up static identity map for 0x80100000 - 0x801000a0 [ 0.157731] Hierarchical SRCU implementation. [ 0.173516] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.192998] smp: Bringing up secondary CPUs ... [ 0.243625] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.323731] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.403845] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.413420] smp: Brought up 1 node, 4 CPUs [ 0.432508] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.438675] CPU: All CPU(s) started in SVC mode. [ 0.445115] devtmpfs: initialized [ 0.465027] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.471124] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.480584] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.488117] pinctrl core: initialized pinctrl subsystem [ 0.493119] NET: Registered protocol family 16 [ 0.497789] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.504480] cpuidle: using governor menu [ 0.530244] No ATAGs? [ 0.530378] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.538737] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.546411] iommu: Adding device reg-dummy to group 0 [ 0.549614] iommu: Adding device 1003000.pcie to group 1 [ 0.554915] iommu: Adding device 50000000.host1x to group 2 [ 0.560472] iommu: Adding device 54200000.dc to group 3 [ 0.565651] iommu: Adding device 54240000.dc to group 4 [ 0.570836] iommu: Adding device 54280000.hdmi to group 5 [ 0.576225] iommu: Adding device 57000000.gpu to group 6 [ 0.581498] iommu: Adding device 60005000.timer to group 7 [ 0.586931] iommu: Adding device 60007000.flow-controller to group 8 [ 0.593276] iommu: Adding device 6000c800.actmon to group 9 [ 0.598806] iommu: Adding device 6000d000.gpio to group 10 [ 0.604282] iommu: Adding device 60020000.dma to group 11 [ 0.609655] iommu: Adding device 70000800.apbmisc to group 12 [ 0.615377] iommu: Adding device 70000868.pinmux to group 13 [ 0.620996] iommu: Adding device 70006000.serial to group 14 [ 0.626643] iommu: Adding device 70006040.serial to group 15 [ 0.632257] iommu: Adding device 70006300.serial to group 16 [ 0.637910] iommu: Adding device 7000c000.i2c to group 17 [ 0.643264] iommu: Adding device 7000c400.i2c to group 18 [ 0.648653] iommu: Adding device 7000c500.i2c to group 19 [ 0.654012] iommu: Adding device 7000c700.i2c to group 20 [ 0.659410] iommu: Adding device 7000d000.i2c to group 21 [ 0.664757] iommu: Adding device 7000d400.spi to group 22 [ 0.670157] iommu: Adding device 7000da00.spi to group 23 [ 0.675508] iommu: Adding device 7000e000.rtc to group 24 [ 0.680898] iommu: Adding device 7000e400.pmc to group 25 [ 0.686251] iommu: Adding device 7000f800.fuse to group 26 [ 0.691729] iommu: Adding device 70019000.memory-controller to group 27 [ 0.698299] iommu: Adding device 7001b000.emc to group 28 [ 0.703694] iommu: Adding device 70027000.sata to group 29 [ 0.709131] iommu: Adding device 70030000.hda to group 30 [ 0.714525] iommu: Adding device 70090000.usb to group 31 [ 0.719878] iommu: Adding device 7009f000.padctl to group 32 [ 0.725545] iommu: Adding device 700b0400.sdhci to group 33 [ 0.731058] iommu: Adding device 700b0600.sdhci to group 34 [ 0.736623] iommu: Adding device 70015000.cec to group 35 [ 0.741993] iommu: Adding device 700e2000.thermal-sensor to group 36 [ 0.748326] iommu: Adding device 70110000.clock to group 37 [ 0.753851] iommu: Adding device 70300000.ahub to group 38 [ 0.759331] iommu: Adding device 7d000000.usb to group 39 [ 0.764684] iommu: Adding device 7d000000.usb-phy to group 40 [ 0.770424] iommu: Adding device 7d004000.usb to group 41 [ 0.775779] iommu: Adding device 7d004000.usb-phy to group 42 [ 0.781522] iommu: Adding device 7d008000.usb to group 43 [ 0.786878] iommu: Adding device 7d008000.usb-phy to group 44 [ 0.792608] iommu: Adding device pmu to group 45 [ 0.797185] iommu: Adding device timer to group 46 [ 0.801952] iommu: Adding device clocks to group 47 [ 0.806820] iommu: Adding device gpio-keys to group 48 [ 0.811920] iommu: Adding device regulators to group 49 [ 0.817144] iommu: Adding device regulators:regulator@0 to group 50 [ 0.823359] iommu: Adding device regulators:regulator@1 to group 51 [ 0.829617] iommu: Adding device regulators:regulator@2 to group 52 [ 0.835839] iommu: Adding device regulators:regulator@3 to group 53 [ 0.842095] iommu: Adding device regulators:regulator@4 to group 54 [ 0.848324] iommu: Adding device regulators:regulator@7 to group 55 [ 0.854576] iommu: Adding device regulators:regulator@8 to group 56 [ 0.860805] iommu: Adding device regulators:regulator@10 to group 57 [ 0.867142] iommu: Adding device regulators:regulator@11 to group 58 [ 0.873450] iommu: Adding device regulators:regulator@12 to group 59 [ 0.879795] iommu: Adding device regulators:regulator@13 to group 60 [ 0.886105] iommu: Adding device regulators:regulator@14 to group 61 [ 0.892447] iommu: Adding device sound to group 62 [ 0.914268] +5V_SYS: supplied by +VDD_MUX [ 0.916762] +3.3V_SYS: supplied by +VDD_MUX [ 0.921315] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.926641] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.934762] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.940487] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.948720] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.955505] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.963708] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.969520] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.977747] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.983299] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.991525] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.997164] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 1.006610] vgaarb: loaded [ 1.008760] SCSI subsystem initialized [ 1.011942] libata version 3.00 loaded. [ 1.015835] usbcore: registered new interface driver usbfs [ 1.021062] usbcore: registered new interface driver hub [ 1.026368] usbcore: registered new device driver usb [ 1.034603] Linux video capture interface: v2.00 [ 1.037384] pps_core: LinuxPPS API ver. 1 registered [ 1.042284] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.051390] PTP clock support registered [ 1.056689] Advanced Linux Sound Architecture Driver Initialized. [ 1.061965] Bluetooth: Core ver 2.22 [ 1.064919] NET: Registered protocol family 31 [ 1.069318] Bluetooth: HCI device and connection manager initialized [ 1.075623] Bluetooth: HCI socket layer initialized [ 1.080493] Bluetooth: L2CAP socket layer initialized [ 1.085529] Bluetooth: SCO socket layer initialized [ 1.090985] clocksource: Switched to clocksource arch_sys_counter [ 1.186198] NET: Registered protocol family 2 [ 1.189653] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.195787] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.202273] TCP: Hash tables configured (established 8192 bind 8192) [ 1.208892] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.214356] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.220947] NET: Registered protocol family 1 [ 1.225700] RPC: Registered named UNIX socket transport module. [ 1.230853] RPC: Registered udp transport module. [ 1.235556] RPC: Registered tcp transport module. [ 1.240212] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.247087] iommu: Adding device regulatory.0 to group 63 [ 1.252217] PCI: CLS 0 bytes, default 64 [ 1.257714] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 1.264792] iommu: Adding device alarmtimer to group 64 [ 1.270394] Initialise system trusted keyrings [ 1.273877] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.281518] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.286648] NFS: Registering the id_resolver key type [ 1.290928] Key type id_resolver registered [ 1.295105] Key type id_legacy registered [ 1.303998] Key type asymmetric registered [ 1.306184] Asymmetric key parser 'x509' registered [ 1.311189] bounce: pool size: 64 pages [ 1.314918] io scheduler noop registered (default) [ 1.319618] io scheduler mq-deadline registered [ 1.324141] io scheduler kyber registered [ 1.329931] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 1.334942] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 1.341900] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 1.357956] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 1.361690] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 1.371580] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 1.382302] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 1.389257] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 1.394824] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.400633] iommu: Adding device serial8250 to group 65 [ 1.407604] console [ttyS0] disabled [ 1.409321] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.418264] console [ttyS0] enabled [ 1.418264] console [ttyS0] enabled [ 1.424464] bootconsole [earlycon0] disabled [ 1.424464] bootconsole [earlycon0] disabled [ 1.433827] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.445259] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.473876] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.493449] loop: module loaded [ 1.497945] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.505402] as3722 4-0040: AS3722 with revision 0x1 found [ 1.513049] iommu: Adding device as3722-pinctrl to group 66 [ 1.520325] iommu: Adding device as3722-regulator to group 67 [ 1.529039] as3722-sd2: supplied by +5V_SYS [ 1.533745] as3722-sd3: supplied by +5V_SYS [ 1.538172] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.544561] as3722-sd4: supplied by +5V_SYS [ 1.549221] as3722-sd5: supplied by +5V_SYS [ 1.555338] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.561448] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.567684] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.573654] as3722-ldo3: supplied by +3.3V_SYS [ 1.578147] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.585981] as3722-ldo4: supplied by +3.3V_SYS [ 1.590654] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.596926] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.601803] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.608750] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.614424] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.620603] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.630846] iommu: Adding device as3722-rtc to group 68 [ 1.636257] iommu: Adding device as3722-adc to group 69 [ 1.641651] iommu: Adding device as3722-power-off to group 70 [ 1.647540] iommu: Adding device as3722-wdt to group 71 [ 1.653546] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.672272] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.678977] iommu: Adding device Fixed MDIO bus.0 to group 72 [ 1.684931] libphy: Fixed MDIO Bus: probed [ 1.689023] CAN device driver interface [ 1.692933] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.699884] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.705614] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.713088] usbcore: registered new interface driver pegasus [ 1.718808] usbcore: registered new interface driver asix [ 1.724293] usbcore: registered new interface driver ax88179_178a [ 1.730429] usbcore: registered new interface driver cdc_ether [ 1.736352] usbcore: registered new interface driver smsc75xx [ 1.742181] usbcore: registered new interface driver smsc95xx [ 1.747972] usbcore: registered new interface driver net1080 [ 1.753698] usbcore: registered new interface driver cdc_subset [ 1.759658] usbcore: registered new interface driver zaurus [ 1.765341] usbcore: registered new interface driver cdc_ncm [ 1.771260] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.776887] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.782615] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.789133] ehci-pci: EHCI PCI platform driver [ 1.793655] tegra-ehci: Tegra EHCI driver [ 1.800505] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.805945] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.813761] tegra-ehci 7d004000.usb: irq 356, io mem 0x7d004000 [ 1.841018] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 1.847841] hub 1-0:1.0: USB hub found [ 1.851650] hub 1-0:1.0: 1 port detected [ 1.856826] usbcore: registered new interface driver cdc_acm [ 1.862497] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.870557] usbcore: registered new interface driver cdc_wdm [ 1.876310] usbcore: registered new interface driver usb-storage [ 1.883960] iommu: Adding device ci_hdrc.0 to group 73 [ 1.895751] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.902650] as3722-rtc as3722-rtc: RTC interrupt 379 [ 1.910469] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.917670] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.924216] i2c /dev entries driver [ 1.928962] usbcore: registered new interface driver uvcvideo [ 1.934724] USB Video Class driver (1.1.1) [ 1.938815] gspca_main: v2.14.0 registered [ 1.943568] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 1.953840] tegra-wdt 60005000.timer: initialized (heartbeat = 120 sec, nowayout = 0) [ 1.962341] iommu: Adding device cpufreq-tegra124 to group 74 [ 1.968655] sdhci: Secure Digital Host Controller Interface driver [ 1.974848] sdhci: Copyright(c) Pierre Ossman [ 1.979197] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.985192] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.990082] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.011041] mmc0: Unknown controller version (3). You may experience problems. [ 2.018297] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.081057] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 2.092555] usbcore: registered new interface driver usbhid [ 2.098228] usbhid: USB HID core driver [ 2.105151] iommu: Adding device snd-soc-dummy to group 75 [ 2.157440] mmc0: new high speed MMC card at address 0001 [ 2.163452] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 2.168383] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 2.174765] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 2.180864] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (247:0) [ 2.189890] mmcblk0: p1 [ 2.551439] iommu: Adding device 70301100.i2s to group 76 [ 2.557706] tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub [ 2.578101] tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok [ 2.588856] input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card1/input0 [ 2.600080] NET: Registered protocol family 10 [ 2.605882] Segment Routing with IPv6 [ 2.609717] mip6: Mobile IPv6 [ 2.612708] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.620121] NET: Registered protocol family 17 [ 2.624640] NET: Registered protocol family 15 [ 2.629092] can: controller area network core (rev 20170425 abi 9) [ 2.635499] NET: Registered protocol family 29 [ 2.639939] can: raw protocol (rev 20170425) [ 2.644221] can: broadcast manager protocol (rev 20170425 t) [ 2.649881] can: netlink gateway (rev 20170425) max_hops=1 [ 2.655611] Bluetooth: RFCOMM socket layer initialized [ 2.660759] Bluetooth: RFCOMM ver 1.11 [ 2.664544] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.669855] Bluetooth: BNEP socket layer initialized [ 2.674830] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.680746] Bluetooth: HIDP socket layer initialized [ 2.685976] Key type dns_resolver registered [ 2.690749] Registering SWP/SWPB emulation handler [ 2.696367] Loading compiled-in X.509 certificates [ 2.718829] +3.3V_RUN: supplied by +3.3V_SYS [ 2.723976] +USB0_VBUS_SW: supplied by +5V_SYS [ 2.728676] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.734710] +5V_USB_HS: supplied by +5V_SYS [ 2.739803] +3.3V_LP0: supplied by +3.3V_SYS [ 2.745162] +5V_HDMI_CON: supplied by +5V_SYS [ 2.749939] +5V_SATA: supplied by +5V_SYS [ 2.754619] +12V_SATA: supplied by +VDD_MUX [ 2.760228] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 2.767111] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 2.774306] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.781834] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.787448] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 2.796564] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.805576] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.814118] as3722-sd2: supplied by +5V_SYS [ 2.818610] as3722-sd3: supplied by +5V_SYS [ 2.823135] as3722-sd4: supplied by +5V_SYS [ 2.827620] as3722-sd5: supplied by +5V_SYS [ 2.833581] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.839063] as3722-ldo1: supplied by +3.3V_RUN [ 2.844268] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.849809] as3722-ldo3: supplied by +3.3V_SYS [ 2.855347] as3722-ldo4: supplied by +3.3V_SYS [ 2.860098] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.865913] input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1 [ 2.874540] as3722-ldo6: supplied by +3.3V_RUN [ 2.879536] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.885006] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.892126] as3722-ldo9: supplied by +5V_SYS [ 2.897590] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.904348] as3722-ldo10: supplied by +5V_SYS [ 2.909454] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.916323] as3722-ldo11: supplied by +3.3V_RUN [ 2.921611] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.930866] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.939944] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.950486] scsi host0: tegra-ahci [ 2.954942] scsi host1: tegra-ahci [ 2.958648] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 2.966693] ata2: DUMMY [ 2.970384] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.975865] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.983765] tegra-ehci 7d008000.usb: irq 357, io mem 0x7d008000 [ 3.011115] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.018235] hub 2-0:1.0: USB hub found [ 3.022114] hub 2-0:1.0: 1 port detected [ 3.101786] tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC [ 3.109212] tegra-xusb 70090000.usb: xHCI Host Controller [ 3.114655] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 3 [ 3.124836] tegra-xusb 70090000.usb: hcc params 0x0184f525 hci version 0x100 quirks 0x00010010 [ 3.133526] tegra-xusb 70090000.usb: irq 347, io mem 0x70090000 [ 3.140926] hub 3-0:1.0: USB hub found [ 3.144802] hub 3-0:1.0: 6 ports detected [ 3.149685] tegra-xusb 70090000.usb: xHCI Host Controller [ 3.155151] tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 4 [ 3.162900] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.172259] hub 4-0:1.0: USB hub found [ 3.176062] hub 4-0:1.0: 2 ports detected [ 3.182099] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 3.187028] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 3.200319] mmc1: Unknown controller version (3). You may experience problems. [ 3.207697] mmc1: Invalid maximum block size, assuming 512 bytes [ 3.271388] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 3.279121] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 3.290106] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes [ 3.294253] ata1: SATA link down (SStatus 0 SControl 300) [ 3.305152] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008 [ 3.335446] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 3.343763] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000 [ 3.357779] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 3.364086] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.370262] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 3.377199] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 3.384577] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.390147] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 3.396180] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.405843] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.415563] pci 0000:00:01.0: enabling Extended Tags [ 3.420585] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.430395] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.440179] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.446807] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.456860] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 3.462944] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.472646] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.482334] pci 0000:00:02.0: enabling Extended Tags [ 3.487298] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.497065] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.506882] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.513631] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.523745] PCI: bus0: Fast back to back transfers disabled [ 3.529402] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.537491] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.545782] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 3.551907] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 3.559024] PCI: bus1: Fast back to back transfers disabled [ 3.564677] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.571582] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 3.577679] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.583364] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 3.590342] mmc1: new high speed SDHC card at address aaaa [ 3.596450] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 3.601520] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.609337] PCI: bus2: Fast back to back transfers disabled [ 3.615027] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.621875] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 3.628729] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 3.635714] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 3.643558] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.649818] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 3.657254] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.662508] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 3.669384] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 3.677429] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 3.684860] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.691151] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.696182] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 3.702477] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 3.709330] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 3.717293] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.724608] mmcblk1: p1 p2 p3 [ 3.727929] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 3.734832] pcieport 0000:00:01.0: Signaling PME with IRQ 395 [ 3.741456] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.748552] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 3.755102] pcieport 0000:00:02.0: Signaling PME with IRQ 396 [ 3.761331] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.766944] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 3.772881] r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express [ 3.802828] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x9a496b53, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22 [ 3.812418] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.824600] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.833688] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.840320] [drm] No driver support for vblank timestamp query. [ 3.974695] tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock [ 4.222855] Console: switching to colour frame buffer device 512x135 [ 4.318771] drm drm: fb0: frame buffer device [ 4.323312] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 4.330570] iommu: Adding device cpufreq-dt.0 to group 77 [ 4.336291] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 4.343635] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 4.352669] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 4.359690] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:30 UTC (946684950) [ 4.368520] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.378214] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.384935] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.391350] +USB0_VBUS_SW: disabling [ 4.391364] +1.8V_RUN_CAM: disabling [ 4.393638] +2.8V_RUN_CAM: disabling [ 4.397286] +1.2V_RUN_CAM_FRONT: disabling [ 4.400886] +1.05V_RUN_CAM_REAR: disabling [ 4.404483] +3.3V_RUN_TOUCH: disabling [ 4.408591] +2.8V_RUN_CAM_AF: disabling [ 4.412710] +1.8V_RUN_VPP_FUSE: disabling [ 4.416468] ALSA device list: [ 4.416471] #0: tegra-hda at 0x70038000 irq 346 [ 4.416472] #1: NVIDIA Tegra Jetson TK1 [ 4.435974] cfg80211: failed to load regulatory.db [ 4.441705] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 4.496646] EXT4-fs (mmcblk0p1): recovery complete [ 4.503150] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.511347] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 4.522625] devtmpfs: mounted [ 4.526123] Freeing unused kernel memory: 1024K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#