Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2017-12-12 08:19:02.218385374 -0800
+++ /tmp/foob	2017-12-12 08:19:02.222385390 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd070]
-Linux version 4.15.0-rc2-333901-gae64f9bd1d36 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 4 14:07:25 PST 2017
+Linux version 4.15.0-rc3-334484-g50c4c4e268a2 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Dec 12 08:08:29 PST 2017
 Machine model: linux,dummy-virt
 Memory limited to 1024MB
 efi: Getting EFI parameters from FDT:
@@ -75,9 +75,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.176:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.184:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000a69658ce, 1 data @ 00000000039ed2b8)
+vdso: 2 pages (1 code @ 00000000724fa184, 1 data @ 00000000624d72be)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -139,60 +139,1253 @@
 pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
 pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
 pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff]
-Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
-SuperH (H)SCI(F) driver initialized
-msm_serial: driver initialized
-cacheinfo: Unable to detect cache hierarchy for CPU 0
-loop: module loaded
- vda: vda1 vda2
-libphy: Fixed MDIO Bus: probed
-tun: Universal TUN/TAP device driver, 1.6
-thunder-xcv, ver 1.0
-thunder-BGX, ver 1.0
-thunder-nic, ver 1.0
-e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
-e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
-igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
-igb: Copyright (c) 2007-2014 Intel Corporation.
-igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
-igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
-sky2: driver version 1.30
-VFIO - User Level meta-driver version: 0.3
-ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
-ehci-pci: EHCI PCI platform driver
-ehci-platform: EHCI generic platform driver
-ehci-orion: EHCI orion driver
-ehci-exynos: EHCI EXYNOS driver
-ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
-ohci-pci: OHCI PCI platform driver
-ohci-platform: OHCI generic platform driver
-ohci-exynos: OHCI EXYNOS driver
-usbcore: registered new interface driver usb-storage
-rtc-pl031 9010000.pl031: rtc core: registered pl031 as rtc0
-i2c /dev entries driver
-sdhci: Secure Digital Host Controller Interface driver
-sdhci: Copyright(c) Pierre Ossman
-Synopsys Designware Multimedia Card Interface Driver
-sdhci-pltfm: SDHCI platform and OF driver helper
-ledtrig-cpu: registered to indicate activity on CPUs
-usbcore: registered new interface driver usbhid
-usbhid: USB HID core driver
-NET: Registered protocol family 17
-9pnet: Installing 9P2000 support
-Key type dns_resolver registered
-registered taskstats version 1
-Loading compiled-in X.509 certificates
-input: gpio-keys as /devices/platform/gpio-keys/input/input0
-rtc-pl031 9010000.pl031: setting system clock to 2017-12-04 22:14:59 UTC (1512425699)
-ALSA device list:
-  No soundcards found.
-uart-pl011 9000000.pl011: no DMA platform data
-EXT4-fs (vda2): couldn't mount as ext3 due to feature incompatibilities
-EXT4-fs (vda2): recovery complete
-EXT4-fs (vda2): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext4 filesystem) on device 254:2.
-devtmpfs: mounted
-Freeing unused kernel memory: 1088K
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-bash-4.3# 
\ No newline at end of file
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (00000000a9458ea2)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff000008045000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 0000000000000097 x10: 0000000000000006 
+x9 : 0000000000000098 x8 : ffff000008567390 
+x7 : 3030303030282061 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd415e ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (00000000a1e0d2c8)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff00000804d000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 00000000000000c4 x10: 0000000000000006 
+x9 : 00000000000000c5 x8 : ffff000008567390 
+x7 : 657261206d762074 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd415f ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (00000000fdfe9c6d)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff000008055000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 00000000000000f1 x10: 0000000000000006 
+x9 : 00000000000000f2 x8 : ffff000008567390 
+x7 : 3030303030282061 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4160 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (00000000fbce98d4)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff00000805d000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 000000000000011e x10: 0000000000000006 
+x9 : 000000000000011f x8 : ffff000008567390 
+x7 : 657261206d762074 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4161 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (0000000054b299b6)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff000008065000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 000000000000014b x10: 0000000000000006 
+x9 : 000000000000014c x8 : ffff000008567390 
+x7 : 3030303030282061 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4162 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (00000000f02b40f1)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff00000806d000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 0000000000000178 x10: 0000000000000006 
+x9 : 0000000000000179 x8 : ffff000008567390 
+x7 : 657261206d762074 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4163 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (000000008225e7e5)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff000008075000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 00000000000001a5 x10: 0000000000000006 
+x9 : 00000000000001a6 x8 : ffff000008567390 
+x7 : 3030303030282061 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4164 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (0000000052ab9c68)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff00000807d000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 00000000000001d2 x10: 0000000000000006 
+x9 : 00000000000001d3 x8 : ffff000008567390 
+x7 : 657261206d762074 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4165 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (0000000075c41f8b)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff00000922c000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 00000000000001ff x10: 0000000000000006 
+x9 : 0000000000000200 x8 : ffff000008567390 
+x7 : 3030303030282061 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4166 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (000000005986a40f)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff00000922e000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 000000000000022c x10: 0000000000000006 
+x9 : 000000000000022d x8 : ffff000008567390 
+x7 : 657261206d762074 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4167 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (00000000ddba3059)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff000009235000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 0000000000000259 x10: 0000000000000006 
+x9 : 000000000000025a x8 : ffff000008567390 
+x7 : 3030303030282061 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4168 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (000000006e2e62cb)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff00000923d000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 0000000000000286 x10: 0000000000000006 
+x9 : 0000000000000287 x8 : ffff000008567390 
+x7 : 657261206d762074 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4169 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (000000006ac0edea)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff000009245000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 00000000000002b3 x10: 0000000000000006 
+x9 : 00000000000002b4 x8 : ffff000008567390 
+x7 : 3030303030282061 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd416a ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (000000009eebeb15)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff00000924d000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 00000000000002e0 x10: 0000000000000006 
+x9 : 00000000000002e1 x8 : ffff000008567390 
+x7 : 657261206d762074 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd416b ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (000000008871e3d4)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff000009255000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 000000000000030d x10: 0000000000000006 
+x9 : 000000000000030e x8 : ffff000008567390 
+x7 : 3030303030282061 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd416c ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (0000000088190ca6)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff00000925d000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 000000000000033a x10: 0000000000000006 
+x9 : 000000000000033b x8 : ffff000008567390 
+x7 : 657261206d762074 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd416d ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (00000000f4ade09a)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff000009265000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 0000000000000367 x10: 0000000000000006 
+x9 : 0000000000000368 x8 : ffff000008567390 
+x7 : 3030303030282061 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd416e ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (00000000711f85bf)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff00000926d000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 0000000000000394 x10: 0000000000000006 
+x9 : 0000000000000395 x8 : ffff000008567390 
+x7 : 657261206d762074 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd416f ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (00000000ad0259be)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff00000927e000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 00000000000003c1 x10: 0000000000000006 
+x9 : 00000000000003c2 x8 : ffff000008567390 
+x7 : 3030303030282061 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4170 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (00000000a51cc889)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff000009285000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 00000000000003ee x10: 0000000000000006 
+x9 : 00000000000003ef x8 : ffff000008567390 
+x7 : 657261206d762074 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4171 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (000000000be0998c)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff00000928d000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 000000000000041b x10: 0000000000000006 
+x9 : 000000000000041c x8 : ffff000008567390 
+x7 : 3030303030282061 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4172 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (00000000007a153f)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff000009295000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 0000000000000448 x10: 0000000000000006 
+x9 : 0000000000000449 x8 : ffff000008567390 
+x7 : 657261206d762074 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4173 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (00000000cf52b8e7)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff00000929d000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 0000000000000475 x10: 0000000000000006 
+x9 : 0000000000000476 x8 : ffff000008567390 
+x7 : 3030303030282061 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4174 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (00000000aea9c56a)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff0000092a5000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 00000000000004a2 x10: 0000000000000006 
+x9 : 00000000000004a3 x8 : ffff000008567390 
+x7 : 657261206d762074 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4175 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (00000000b7b97ff1)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff0000092ad000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 00000000000004cf x10: 0000000000000006 
+x9 : 00000000000004d0 x8 : ffff000008567390 
+x7 : 3030303030282061 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4176 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (00000000d7ce692b)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff0000092b5000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 00000000000004fc x10: 0000000000000006 
+x9 : 00000000000004fd x8 : ffff000008567390 
+x7 : 657261206d762074 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4177 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (000000004083bdb0)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff0000092bd000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 0000000000000529 x10: 0000000000000006 
+x9 : 000000000000052a x8 : ffff000008567390 
+x7 : 3030303030282061 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_for_each_dev+0x58/0x98
+ driver_attach+0x20/0x28
+ bus_add_driver+0x1c0/0x224
+ driver_register+0x60/0xf4
+ __platform_driver_register+0x4c/0x54
+ virtio_mmio_init+0x18/0x20
+ do_one_initcall+0x38/0x118
+ kernel_init_freeable+0x18c/0x228
+ kernel_init+0x10/0xfc
+ ret_from_fork+0x10/0x18
+---[ end trace 180db5dcf2fd4178 ]---
+------------[ cut here ]------------
+Trying to vfree() nonexistent vm area (000000000f45b06e)
+WARNING: CPU: 0 PID: 1 at mm/vmalloc.c:1525 __vunmap+0xc8/0xd0
+Modules linked in:
+CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W        4.15.0-rc3-334484-g50c4c4e268a2 #1
+Hardware name: linux,dummy-virt (DT)
+pstate: 60000005 (nZCv daif -PAN -UAO)
+pc : __vunmap+0xc8/0xd0
+lr : __vunmap+0xc8/0xd0
+sp : ffff00000802bbc0
+x29: ffff00000802bbc0 x28: ffff000008e990a0 
+x27: ffff000009044000 x26: ffff000008e10478 
+x25: ffff000008e99100 x24: 0000000000000000 
+x23: ffff00000802bc60 x22: 0000000000000001 
+x21: 0000000000000000 x20: 0000000000000000 
+x19: ffff0000092c5000 x18: 0000000000000007 
+x17: 000000000000000e x16: 0000000000000001 
+x15: 0000000000000019 x14: 0000000000000033 
+x13: 000000000000004c x12: 0000000000000000 
+x11: 0000000000000556 x10: 0000000000000006 
+x9 : 0000000000000557 x8 : ffff000008567390 
+x7 : 657261206d762074 x6 : ffff00000906ce10 
+x5 : 0000000000000000 x4 : 0000000000000000 
+x3 : ffffffffffffffff x2 : ffff000008f42de0 
+x1 : ffff80003d9d0000 x0 : 0000000000000038 
+Call trace:
+ __vunmap+0xc8/0xd0
+ vunmap+0x24/0x30
+ __iounmap+0x2c/0x34
+ devm_ioremap_release+0x10/0x18
+ release_nodes+0x124/0x208
+ devres_release_all+0x34/0x54
+ driver_probe_device+0xbc/0x308
+ __driver_attach+0xa4/0xa8
+ bus_
\ No newline at end of file
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-12 08:19:02.290385676 -0800
+++ /tmp/foob	2017-12-12 08:19:02.294385692 -0800
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ##############################
-	 2.9 MiB/s
+	 3.3 MiB/s
 done
 Bytes transferred = 8061440 (7b0200 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
@@ -49,7 +49,7 @@
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 97.7 KiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-333901-gae64f9bd1d36 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 4 14:01:38 PST 2017
+Linux version 4.15.0-rc3-334484-g50c4c4e268a2 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Dec 12 08:01:37 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -375,8 +375,8 @@
 usb2_vbus: supplied by vdd-sys-5v0
 mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
-[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  mmcblk0: p1 p2 p3
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
@@ -394,7 +394,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-04-27 05:04:16 UTC (956811856)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-05-04 23:04:56 UTC (957481496)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -406,5 +406,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.929248] usb 1-1: new high-speed USB device number 2 using tegra-ehci
-asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:b5:16
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-12 08:19:02.302385725 -0800
+++ /tmp/foob	2017-12-12 08:19:02.306385742 -0800
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -40,7 +40,7 @@
 	 ###############################
 	 3.2 MiB/s
 done
-Bytes transferred = 6166488 (5e17d8 hex)
+Bytes transferred = 6167344 (5e1b30 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
@@ -51,7 +51,7 @@
 done
 Bytes transferred = 34502 (86c6 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5e17d8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5e1b30 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff6c5 ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-13952-gae64f9b (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 4 14:01:17 PST 2017
+Linux version 4.15.0-rc3-14535-g50c4c4e (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Dec 12 08:01:16 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -81,7 +81,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998600K/2096128K available (9216K kernel code, 777K rwdata, 2556K rodata, 1024K init, 299K bss, 31992K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998600K/2096128K available (9216K kernel code, 777K rwdata, 2560K rodata, 1024K init, 299K bss, 31992K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -388,7 +388,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-04-27 05:01:28 UTC (956811688)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-05-04 23:02:18 UTC (957481338)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
@@ -406,4 +406,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.170586] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.161233] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-12 08:19:02.326385825 -0800
+++ /tmp/foob	2017-12-12 08:19:02.330385843 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -35,7 +35,7 @@
 	 #################################################################
 	 #################################################################
 	 ##############################
-	 3.8 MiB/s
+	 4 MiB/s
 done
 Bytes transferred = 8061440 (7b0200 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
@@ -44,7 +44,7 @@
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 3.5 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
@@ -56,7 +56,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-333901-gae64f9bd1d36 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 4 14:01:38 PST 2017
+Linux version 4.15.0-rc3-334484-g50c4c4e268a2 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Dec 12 08:01:37 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -499,7 +499,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
 r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xbb6875ff, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xeec09fc6, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -510,7 +510,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:12 UTC (946685052)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:04:07 UTC (946685047)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
@@ -520,9 +520,9 @@
 +2.8V_RUN_CAM_AF: disabling
 +1.8V_RUN_VPP_FUSE: disabling
 ata1: SATA link down (SStatus 0 SControl 300)
-tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
 mmc1: new high speed SDHC card at address aaaa
 mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
+tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock
  mmcblk1: p1 p2 p3
 mmcblk0: mmc0:0001 SEM16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
@@ -534,8 +534,8 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:17.
 devtmpfs: mounted
-Console: switching to colour frame buffer device 512x135
 Freeing unused kernel memory: 2048K
+Console: switching to colour frame buffer device 512x135
 drm drm: fb0:  frame buffer device
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-12 08:19:02.358385959 -0800
+++ /tmp/foob	2017-12-12 08:19:02.362385976 -0800
@@ -33,20 +33,20 @@
 	 #################################################################
 	 #################################################################
 	 ###############################
-	 4 MiB/s
+	 944.3 KiB/s
 done
-Bytes transferred = 6166488 (5e17d8 hex)
+Bytes transferred = 6167344 (5e1b30 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 927.7 KiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5e17d8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5e1b30 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-13952-gae64f9b (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 4 14:01:17 PST 2017
+Linux version 4.15.0-rc3-14535-g50c4c4e (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Dec 12 08:01:16 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -76,7 +76,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998492K/2096128K available (9216K kernel code, 777K rwdata, 2556K rodata, 1024K init, 299K bss, 32100K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998492K/2096128K available (9216K kernel code, 777K rwdata, 2560K rodata, 1024K init, 299K bss, 32100K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -507,7 +507,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
 r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x9be0125f, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x5671c21a, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -520,7 +520,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:14 UTC (946684814)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:18 UTC (946684818)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2017-12-12 08:19:02.378386043 -0800
+++ /tmp/foob	2017-12-12 08:19:02.378386043 -0800
@@ -33,20 +33,20 @@
 	 #################################################################
 	 #################################################################
 	 ##########################################
-	 3.9 MiB/s
+	 3.8 MiB/s
 done
-Bytes transferred = 6331512 (609c78 hex)
+Bytes transferred = 6331136 (609b00 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.7 MiB/s
+	 3.5 MiB/s
 done
 Bytes transferred = 66544 (103f0 hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x609c78 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x609b00 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 830133ef
@@ -54,7 +54,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-215660-gae64f9b (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 4 14:01:32 PST 2017
+Linux version 4.15.0-rc3-216243-g50c4c4e (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Dec 12 08:02:12 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -515,7 +515,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:02:00.0: enabling device (0140 -> 0143)
 r8169 0000:02:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x4d1376b4, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
+r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0x69af85ca, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 22
 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
@@ -528,7 +528,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input2
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:00 UTC (946684920)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:01:56 UTC (946684916)
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-12 08:19:02.418386211 -0800
+++ /tmp/foob	2017-12-12 08:19:02.418386211 -0800
@@ -28,10 +28,10 @@
 1 Ethernet Device(s) found
 Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000
 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash'
-Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig
 Using asx0 device
-TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'zImage.multi_v7_defconfig'.
 Load address: 0x82000000
 Loading: *#################################################################
@@ -43,16 +43,16 @@
 	 #################################################################
 	 #################################################################
 	 ##############################
-	 2.8 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 8061440 (7b0200 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
-TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 1 MiB/s
+	 3.2 MiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
@@ -64,7 +64,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-333901-gae64f9bd1d36 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 4 14:01:38 PST 2017
+Linux version 4.15.0-rc3-334484-g50c4c4e268a2 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Dec 12 08:01:37 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -369,8 +369,10 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc0: Unknown controller version (3). You may experience problems.
 mmc0: Invalid maximum block size, assuming 512 bytes
+elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009
 mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
 ledtrig-cpu: registered to indicate activity on CPUs
+input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
 NET: Registered protocol family 10
@@ -378,6 +380,12 @@
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
 NET: Registered protocol family 17
 can: controller area network core (rev 20170425 abi 9)
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (237:0)
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 NET: Registered protocol family 29
 can: raw protocol (rev 20170425)
 can: broadcast manager protocol (rev 20170425 t)
@@ -397,25 +405,18 @@
 +5V_USB_SS: supplied by +5V_SYS
 +3.3V_PANEL: supplied by +3.3V_RUN
 +3.3V_LP0: supplied by +3.3V_SYS
-mmc0: new high speed MMC card at address 0001
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 +5V_HDMI_CON: supplied by +5V_SYS
  usb3-0: usb3-0 supply vbus not found, using dummy regulator
  usb3-1: usb3-1 supply vbus not found, using dummy regulator
-elan_i2c 1-0015: reading cmd (0x0110) fail.
-elan_i2c 1-0015: failed to get IAP version: -121
-elan_i2c: probe of 1-0015 failed with error -121
+elan_i2c 1-0015: failed to read report data: -121
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
 sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq
 mmc1: Unknown controller version (3). You may experience problems.
 mmc1: Invalid maximum block size, assuming 512 bytes
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 mmc1: Switching to 3.3V signalling voltage failed
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB, chardev (237:0)
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+elan_i2c 1-0015: invalid report id data (ff)
 mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-12 08:19:02.462386395 -0800
+++ /tmp/foob	2017-12-12 08:19:02.466386412 -0800
@@ -28,10 +28,10 @@
 1 Ethernet Device(s) found
 Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000
 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash'
-Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig
 Using asx0 device
-TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'zImage.tegra_defconfig'.
 Load address: 0x82000000
 Loading: *#################################################################
@@ -41,12 +41,12 @@
 	 #################################################################
 	 #################################################################
 	 ###############################
-	 3.5 MiB/s
+	 3.6 MiB/s
 done
-Bytes transferred = 6166488 (5e17d8 hex)
+Bytes transferred = 6167344 (5e1b30 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
-TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
@@ -54,7 +54,7 @@
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x5e17d8 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x5e1b30 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-13952-gae64f9b (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 4 14:01:17 PST 2017
+Linux version 4.15.0-rc3-14535-g50c4c4e (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Dec 12 08:01:16 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -85,7 +85,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999512K/2097148K available (9216K kernel code, 777K rwdata, 2556K rodata, 1024K init, 299K bss, 32100K reserved, 65536K cma-reserved, 1245180K highmem)
+Memory: 1999512K/2097148K available (9216K kernel code, 777K rwdata, 2560K rodata, 1024K init, 299K bss, 32100K reserved, 65536K cma-reserved, 1245180K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -423,8 +423,8 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
 mmc2: Invalid maximum block size, assuming 512 bytes
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 mmc1: new high speed SDIO card at address 0001
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig%tegra-fw_log.txt
--- /tmp/fooa	2017-12-12 08:19:02.510386597 -0800
+++ /tmp/foob	2017-12-12 08:19:02.514386613 -0800
@@ -28,10 +28,10 @@
 1 Ethernet Device(s) found
 Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000
 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash'
-Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.104; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.tegra_defconfig%tegra-fw
 Using asx0 device
-TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'zImage.tegra_defconfig%tegra-fw'.
 Load address: 0x82000000
 Loading: *#################################################################
@@ -41,20 +41,20 @@
 	 #################################################################
 	 #################################################################
 	 ##########################################
-	 3 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 6331512 (609c78 hex)
+Bytes transferred = 6331136 (609b00 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
-TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+TFTP from server 192.168.100.1; our IP address is 192.168.100.104
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.4 MiB/s
+	 514.6 KiB/s
 done
 Bytes transferred = 67482 (1079a hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x609c78 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x609b00 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013799
@@ -62,7 +62,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-215660-gae64f9b (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 4 14:01:32 PST 2017
+Linux version 4.15.0-rc3-216243-g50c4c4e (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Dec 12 08:02:12 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -366,14 +366,16 @@
 max98090 0-0010: MAX98090 REVID=0x43
 max98090 0-0010: use default 2.8v micbias
 tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 input: GoogleNyanBig Headphones as /devices/soc0/sound/sound/card1/input1
 input: GoogleNyanBig Mic Jack as /devices/soc0/sound/sound/card1/input2
 NET: Registered protocol family 10
 Segment Routing with IPv6
 mip6: Mobile IPv6
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
 NET: Registered protocol family 17
 NET: Registered protocol family 15
 can: controller area network core (rev 20170425 abi 9)
@@ -407,8 +409,6 @@
  usb3-1: usb3-1 supply vbus not found, using dummy regulator
 tegra-sor 54540000.sor: failed to probe output: -517
 panel-simple panel: panel supply power not found, using dummy regulator
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
 tegra-xusb 70090000.usb: Firmware timestamp: 2014-09-16 02:10:07 UTC
 tegra-xusb 70090000.usb: xHCI Host Controller
 tegra-xusb 70090000.usb: new USB bus registered, assigned bus number 1
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
--- /tmp/fooa	2017-12-12 08:19:02.574386863 -0800
+++ /tmp/foob	2017-12-12 08:19:02.574386863 -0800
@@ -31,7 +31,7 @@
 MSENC clock is set to  79200 KHz
 Vde clock is set to 204000 KHz
 
-Bootloader-Cpu Init at (time stamp): 1801551 us
+Bootloader-Cpu Init at (time stamp): 1801638 us
 
 Pinmux changes applied in kernel way
 
@@ -59,25 +59,25 @@
 The proc BoardInfo: 0x0176:0x0001:0x01:0x43:0x00
 FastbootAddAtag: setting ATAG (0)
 
-Board Id Read Time: 3 us
+Board Id Read Time: 4 us
 Power Rail enable Time: 1 us
 
-Miscellaneous avp time: 1801525  us
-Bootloader (AosInit) time: 733470 us
-Bootloader Main Init time: 180209 us
-BlockDevMgrInit time: 157540 us
+Miscellaneous avp time: 1801611  us
+Bootloader (AosInit) time: 733464 us
+Bootloader Main Init time: 180263 us
+BlockDevMgrInit time: 157518 us
 PartMgrInit time: 8 us
 StorMgrInit time: 31 us
 FsMgrInit time: 2 us
-Partition Table load: 77091 us 
-Display init time: 574542 us
+Partition Table load: 77075 us 
+Display init time: 574599 us
 Kernel read time: 1510 msec
 Load Kernel Size:   20013056 Bytes
 Bl Kernel ReadSpeed: 13253000 Bytes/sec
-Pre-Kernel Jump time: 4246054 us
-Clearing 32 Bit State and Warm resetting to 64bit mode: 9374165 us
+Pre-Kernel Jump time: 4246407 us
+Clearing 32 Bit State and Warm resetting to 64bit mode: 9374379 us
 Booting Linux on physical CPU 0x0000000000 [0x4e0f0000]
-Linux version 4.15.0-rc2-333901-gae64f9bd1d36 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 4 14:07:25 PST 2017
+Linux version 4.15.0-rc3-334484-g50c4c4e268a2 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Dec 12 08:08:29 PST 2017
 Machine model: NVIDIA Tegra132 Norrin
 Memory limited to 1734MB
 efi: Getting EFI parameters from FDT:
@@ -148,9 +148,9 @@
 DMI not present or invalid.
 NET: Registered protocol family 16
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.132:1): state=initialized audit_enabled=0 res=1
+audit: type=2000 audit(0.140:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000621424ee, 1 data @ 0000000071bd77d7)
+vdso: 2 pages (1 code @ 00000000d62e9767, 1 data @ 00000000b229bfff)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -284,8 +284,6 @@
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 input: gpio-keys as /devices/platform/gpio-keys/input/input0
 hctosys: unable to open rtc device (rtc0)
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
 +3.3V_AVDD_HDMI_AP_GATED: disabling
 +VDD_LED: disabling
 +5V_USB_HS: disabling
@@ -295,6 +293,8 @@
 ALSA device list:
   No soundcards found.
 Freeing unused kernel memory: 1088K
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
 
 System initialization...
 
Diff for ./tegra186-p2771-0000/tegra186-p2771-0000/defconfig%jetson-tx2_log.txt
Binary files /tmp/fooa and /tmp/foob differ
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-12 08:19:02.698387384 -0800
+++ /tmp/foob	2017-12-12 08:19:02.702387400 -0800
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -48,7 +48,7 @@
 	 #################################################################
 	 #################################################################
 	 ##############################
-	 4 MiB/s
+	 3.8 MiB/s
 done
 Bytes transferred = 8061440 (7b0200 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
@@ -69,7 +69,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-333901-gae64f9bd1d36 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 4 14:01:38 PST 2017
+Linux version 4.15.0-rc3-334484-g50c4c4e268a2 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Dec 12 08:01:37 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -267,7 +267,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf6a82936, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xb6bf06e2, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -367,5 +367,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/#  
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-12 08:19:02.730387517 -0800
+++ /tmp/foob	2017-12-12 08:19:02.734387534 -0800
@@ -48,7 +48,7 @@
 	 ###############################
 	 4 MiB/s
 done
-Bytes transferred = 6166488 (5e17d8 hex)
+Bytes transferred = 6167344 (5e1b30 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -59,7 +59,7 @@
 done
 Bytes transferred = 21160 (52a8 hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5e17d8 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5e1b30 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 024102a7
@@ -67,7 +67,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-13952-gae64f9b (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 4 14:01:17 PST 2017
+Linux version 4.15.0-rc3-14535-g50c4c4e (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Dec 12 08:01:16 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: Compulab TrimSlice board
@@ -88,7 +88,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 959424K/1048576K available (9216K kernel code, 777K rwdata, 2556K rodata, 1024K init, 299K bss, 23616K reserved, 65536K cma-reserved, 196608K highmem)
+Memory: 959424K/1048576K available (9216K kernel code, 777K rwdata, 2560K rodata, 1024K init, 299K bss, 23616K reserved, 65536K cma-reserved, 196608K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -257,7 +257,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x166e3d63, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
+r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x7540a6f6, 00:01:c0:13:7d:63, XID 081000c0 IRQ 286
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
@@ -322,33 +322,33 @@
 Bluetooth: RFCOMM ver 1.11
 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
 Bluetooth: BNEP socket layer initialized
-Bluetooth: HIDP (Human Interface Emulation) ver 1.2
 usb 1-1: new high-speed USB device number 2 using tegra-ehci
+Bluetooth: HIDP (Human Interface Emulation) ver 1.2
 Bluetooth: HIDP socket layer initialized
 Key type dns_resolver registered
 Registering SWP/SWPB emulation handler
 Loading compiled-in X.509 certificates
-mmc1: new high speed SD card at address b368
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
+mmc1: new high speed SD card at address b368
 tegra-ehci c5000000.usb: EHCI Host Controller
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
  mmcblk1: p1 p2
+tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-hub 1-1:1.0: USB hub found
-hub 1-1:1.0: 4 ports detected
 rtc-em3027 2-0056: hctosys: unable to read the hardware clock
 cfg80211: Loading compiled-in X.509 certificates for regulatory database
+hub 1-1:1.0: USB hub found
+hub 1-1:1.0: 4 ports detected
 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
 platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
+cfg80211: failed to load regulatory.db
 ALSA device list:
   #0: tegra-trimslice
 Waiting for root device PARTUUID=11eb23c1-01...
-cfg80211: failed to load regulatory.db
 usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
 mmc0: host does not support reading read-only switch, assuming write-enable
 mmc0: new high speed SDHC card at address b368
@@ -363,5 +363,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/#  
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig%jetson-tx1_log.txt
--- /tmp/fooa	2017-12-12 08:19:02.758387634 -0800
+++ /tmp/foob	2017-12-12 08:19:02.762387651 -0800
@@ -1,7 +1,7 @@
 [TegraBoot] (version 23.00.2015.14-mobile-1ef66670)
 Processing in cold boot mode Bootloader 2
 A01Q Bootrom Patch rev = 3
-Power-up reason: pmu watchdog
+Power-up reason: on button
 No Battery Present
 Platform has Ddr4 type ram
 max77620 disabling SD1 Remote Sense
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 801448 us
-Basic modules init took 348592 us
+Tegraboot started after 768967 us
+Basic modules init took 348595 us
 Sec Bootdevice Read Time = 202 ms, Read Size = 8459 KB
-Next stage binary read took 14362 us
-Carveout took 252657 us
-CPU initialization took 92421 us
-Total time taken by TegraBoot 708032 us
+Next stage binary read took 14363 us
+Carveout took 252718 us
+CPU initialization took 92403 us
+Total time taken by TegraBoot 708079 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.639] LPDDR4 Training: Number of tables = 10
+64b[0001.607] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -121,7 +121,7 @@
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
 44764 bytes read in 454 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 495 ms (3.1 MiB/s)
+1627787 bytes read in 494 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc2-13952-gae64f9b (jonathanh@kaivo) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 4 14:04:51 PST 2017
+Linux version 4.15.0-rc3-216243-g50c4c4e (jonathanh@sellafield) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Dec 12 08:07:40 PST 2017
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -171,7 +171,7 @@
 Policy zone: Normal
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 software IO TLB [mem 0xfa000000-0xfe000000] (64MB) mapped at [        (ptrval)-        (ptrval)]
-Memory: 2982492K/3131392K available (9404K kernel code, 1150K rwdata, 4592K rodata, 1088K init, 395K bss, 132516K reserved, 16384K cma-reserved)
+Memory: 2982492K/3131392K available (9404K kernel code, 1150K rwdata, 4596K rodata, 1088K init, 395K bss, 132516K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
@@ -233,7 +233,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.268:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000da6538dc, 1 data @ 000000008ce09ed1)
+vdso: 2 pages (1 code @ 00000000ff1bd137, 1 data @ 000000002a39f251)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
--- /tmp/fooa	2017-12-12 08:19:02.806387835 -0800
+++ /tmp/foob	2017-12-12 08:19:02.810387852 -0800
@@ -64,17 +64,17 @@
 Loading and Validation of Secure OS Successful
 NvTbootPackSdramParams: start. 
 NvTbootPackSdramParams: done. 
-Tegraboot started after 722955 us
-Basic modules init took 350152 us
-Sec Bootdevice Read Time = 204 ms, Read Size = 8459 KB
-Next stage binary read took 14363 us
-Carveout took 253843 us
-CPU initialization took 92970 us
-Total time taken by TegraBoot 711328 us
+Tegraboot started after 835481 us
+Basic modules init took 349014 us
+Sec Bootdevice Read Time = 203 ms, Read Size = 8459 KB
+Next stage binary read took 14371 us
+Carveout took 252675 us
+CPU initialization took 92447 us
+Total time taken by TegraBoot 708507 us
 
 Starting CPU & Halting co-processor 
 
-64b[0001.565] LPDDR4 Training: Number of tables = 10
+64b[0001.672] LPDDR4 Training: Number of tables = 10
 EMC Training (SRC-freq: 204000; DST-freq: 408000)
 EMC Training Successful
 EMC Training (SRC-freq: 204000; DST-freq: 665600)
@@ -108,7 +108,7 @@
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # ums 0 mmc 0
 UMS: disk start sector: 0x0, count: 0x1d5a000
-|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-CTRL+C - Operation aborted
+|/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\|/-\/-\CTRL+C - Operation aborted
 Tegra210 (P2371-0000) # 
 Tegra210 (P2371-0000) # env set fdt_copy_node_names /cpus:/psci
 Tegra210 (P2371-0000) # setenv rootpart 1
@@ -117,11 +117,11 @@
 Tegra210 (P2371-0000) # part uuid ${devtype} ${devnum}:${rootpart} uuid
 Tegra210 (P2371-0000) # setenv bootargs ignore_loglevel console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x70006000 rw root=PARTUUID=00000000-0001-0000-788f-a75600000000 rootwait debug earlyprintk init=/bin/bash
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${kernel_addr_r} /boot/Image.defconfig
-16513536 bytes read in 830 ms (19 MiB/s)
+16513536 bytes read in 836 ms (18.8 MiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${fdt_addr_r} /boot/tegra210-p2371-0000.dtb
 44764 bytes read in 453 ms (95.7 KiB/s)
 Tegra210 (P2371-0000) # load ${devtype} ${devnum}:${rootpart} ${ramdisk_addr_r} /boot/tegra-ramdisk.img
-1627787 bytes read in 494 ms (3.1 MiB/s)
+1627787 bytes read in 495 ms (3.1 MiB/s)
 Tegra210 (P2371-0000) # ramdisk_size=${filesize}
 Tegra210 (P2371-0000) # booti ${kernel_addr_r} - ${fdt_addr_r}
 ## Flattened Device Tree blob at 82000000
@@ -131,7 +131,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc2-333901-gae64f9bd1d36 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 4 14:07:25 PST 2017
+Linux version 4.15.0-rc3-334484-g50c4c4e268a2 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Dec 12 08:08:29 PST 2017
 Machine model: NVIDIA Tegra210 P2371 (P2530/P2595) reference design
 debug: ignoring loglevel setting.
 earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
@@ -233,7 +233,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.268:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 0000000061790853, 1 data @ 00000000468b6693)
+vdso: 2 pages (1 code @ 0000000024f969bd, 1 data @ 0000000078cf9fa9)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -268,7 +268,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 128
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 8099d000
+kvm [1]: IDMAP page: 8099e000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
@@ -345,7 +345,6 @@
 hctosys: unable to open rtc device (rtc0)
 ALSA device list:
   No soundcards found.
-Waiting for root device PARTUUID=00000000-0001-0000-788f-a75600000000...
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 SDW16G 14.7 GiB 
 mmcblk0boot0: mmc0:0001 SDW16G partition 1 4.00 MiB
Diff for ./tegra210-p2371-2180/tegra210-p2371-2180/defconfig%jetson-tx1_log.txt
Binary files /tmp/fooa and /tmp/foob differ
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
--- /tmp/fooa	2017-12-12 08:19:02.882388153 -0800
+++ /tmp/foob	2017-12-12 08:19:02.886388170 -0800
@@ -1,5 +1,5 @@
 Booting Linux on physical CPU 0x0000000000 [0x411fd071]
-Linux version 4.15.0-rc2-333901-gae64f9bd1d36 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Mon Dec 4 14:07:25 PST 2017
+Linux version 4.15.0-rc3-334484-g50c4c4e268a2 (jonathanh@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)) #1 SMP PREEMPT Tue Dec 12 08:08:29 PST 2017
 Machine model: Google Pixel C
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
@@ -109,7 +109,7 @@
 audit: initializing netlink subsys (disabled)
 audit: type=2000 audit(0.180:1): state=initialized audit_enabled=0 res=1
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ 00000000d560e44e, 1 data @ 0000000055f2fcc6)
+vdso: 2 pages (1 code @ 0000000054b2aa07, 1 data @ 000000008af7ac0d)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -151,7 +151,7 @@
 Unpacking initramfs...
 Freeing initrd memory: 3412K
 kvm [1]: 8-bit VMID
-kvm [1]: IDMAP page: 8099d000
+kvm [1]: IDMAP page: 8099e000
 kvm [1]: HYP VA range: 800000000000:ffffffffffff
 kvm [1]: vgic-v2@50044000
 kvm [1]: vgic interrupt IRQ1
@@ -265,7 +265,7 @@
 mmcblk0boot1: mmc0:0001 BGND3R partition 2 4.00 MiB
 mmcblk0rpmb: mmc0:0001 BGND3R partition 3 4.00 MiB, chardev (240:0)
  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
-max77686-rtc max77620-rtc: setting system clock to 2001-09-15 03:38:10 UTC (1000525090)
+max77686-rtc max77620-rtc: setting system clock to 2001-09-22 21:39:56 UTC (1001194796)
 PP1200_AVDD: disabling
 PP1200_RCAM: disabling
 PP2800L_RCAM: disabling
@@ -276,8 +276,8 @@
 PP1800_CAM: disabling
 ALSA device list:
   No soundcards found.
-tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 Freeing unused kernel memory: 1088K
+tegra-i2c 7000d100.i2c: could not find pctldev for node /host1x@50000000/dpaux@545c0000/pinmux-i2c, deferring probe
 
 System initialization...
 
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-12-12 08:19:02.902388237 -0800
+++ /tmp/foob	2017-12-12 08:19:02.906388253 -0800
@@ -40,7 +40,7 @@
 	 #################################################################
 	 #################################################################
 	 ##############################
-	 2.8 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 8061440 (7b0200 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
@@ -61,7 +61,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-333901-gae64f9bd1d36 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Dec 4 14:01:38 PST 2017
+Linux version 4.15.0-rc3-334484-g50c4c4e268a2 (jonathanh@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Tue Dec 12 08:01:37 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -433,7 +433,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xb7983cb6, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xe07cc34a, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -464,4 +464,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.504062] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.504060] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-12-12 08:19:02.926388337 -0800
+++ /tmp/foob	2017-12-12 08:19:02.930388354 -0800
@@ -38,9 +38,9 @@
 	 #################################################################
 	 #################################################################
 	 ###############################
-	 3.4 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 6166488 (5e17d8 hex)
+Bytes transferred = 6167344 (5e1b30 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -51,7 +51,7 @@
 done
 Bytes transferred = 51470 (c90e hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5e17d8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5e1b30 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff90d ... OK
@@ -59,7 +59,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.15.0-rc2-13952-gae64f9b (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Mon Dec 4 14:01:17 PST 2017
+Linux version 4.15.0-rc3-14535-g50c4c4e (jonathanh@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP PREEMPT Tue Dec 12 08:01:16 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt: Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -80,7 +80,7 @@
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=edbe1840-3633-c751-7993-b0ac834f81e0 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1998528K/2096128K available (9216K kernel code, 777K rwdata, 2556K rodata, 1024K init, 299K bss, 32064K reserved, 65536K cma-reserved, 1244160K highmem)
+Memory: 1998528K/2096128K available (9216K kernel code, 777K rwdata, 2560K rodata, 1024K init, 299K bss, 32064K reserved, 65536K cma-reserved, 1244160K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -427,7 +427,7 @@
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 (unnamed net_device) (uninitialized): not PCI Express
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xa9776ae8, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xea3e3dc0, 02:04:4b:01:60:a6, XID 0c900800 IRQ 18
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -464,4 +464,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.737637] usb 2-1: n
\ No newline at end of file
+root@(none):/# [    4.737628] usb 2-1: new high-speed USB device number 2 using tegra-ehci
