U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32) U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32) TEGRA114 Board: NVIDIA Dalmore I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra114 (Dalmore) # Tegra114 (Dalmore) # usb reset (Re)start USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra114 (Dalmore) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash' Tegra114 (Dalmore) # setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra114 (Dalmore) # tftpboot 0x81000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 3 MiB/s done Bytes transferred = 8159752 (7c8208 hex) Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'tegra114-dalmore.dtb'. Load address: 0x82000000 Loading: *### 2.6 MiB/s done Bytes transferred = 35036 (88dc hex) Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x7c8200 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8fff4000, end 8ffff8db ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.0-rc7-201379-g0b07194 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Oct 30 06:34:01 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra114 Dalmore evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c158fa40, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @eef98000 s39424 r8192 d22016 u69632 [ 0.000000] pcpu-alloc: s39424 r8192 d22016 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=7369c667-ff51-ec4a-29cd-baabf2fbe346 rootwait gpt debug earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1993476K/2096128K available (10240K kernel code, 1631K rwdata, 4504K rodata, 2048K init, 406K bss, 37116K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc1597ee8 (1632 kB) [ 0.000000] .bss : 0xc15a0b9c - 0xc16064fc ( 407 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000029] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000045] Switching to timer-based delay loop, resolution 1000ns [ 0.003216] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.003235] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.003255] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.003269] Switching to timer-based delay loop, resolution 83ns [ 0.003686] Console: colour dummy device 80x30 [ 0.003721] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.003741] pid_max: default: 32768 minimum: 301 [ 0.003843] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003858] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004375] CPU: Testing write buffer coherency: ok [ 0.004619] /cpus/cpu@0 missing clock-frequency property [ 0.004651] /cpus/cpu@1 missing clock-frequency property [ 0.004683] /cpus/cpu@2 missing clock-frequency property [ 0.004717] /cpus/cpu@3 missing clock-frequency property [ 0.004731] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.005038] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.006284] Hierarchical SRCU implementation. [ 0.007651] Tegra Revision: A01 SKU: 0 CPU Process: 1 SoC Process: 0 [ 0.008306] EFI services will not be available. [ 0.008460] smp: Bringing up secondary CPUs ... [ 0.008956] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.009540] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.010122] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.010225] smp: Brought up 1 node, 4 CPUs [ 0.010247] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.010257] CPU: All CPU(s) started in SVC mode. [ 0.011771] devtmpfs: initialized [ 0.019781] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.020084] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.020103] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.021566] pinctrl core: initialized pinctrl subsystem [ 0.022837] DMI not present or invalid. [ 0.023089] NET: Registered protocol family 16 [ 0.025325] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.027291] cpuidle: using governor menu [ 0.048569] No ATAGs? [ 0.048701] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.048717] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.054206] Serial: AMBA PL011 UART driver [ 0.054956] tegra-mc 70019000.memory-controller: no memory timings for RAM code 3 registered [ 0.055083] iommu: Adding device reg-dummy to group 0 [ 0.055119] iommu: Adding device 50000000.host1x to group 1 [ 0.055158] iommu: Adding device 54140000.gr2d to group 2 [ 0.055191] iommu: Adding device 54180000.gr3d to group 3 [ 0.055262] iommu: Adding device 54200000.dc to group 4 [ 0.055329] iommu: Adding device 54240000.dc to group 5 [ 0.055364] iommu: Adding device 54280000.hdmi to group 6 [ 0.055403] iommu: Adding device 54300000.dsi to group 7 [ 0.055438] iommu: Adding device 60005000.timer to group 8 [ 0.055480] iommu: Adding device 60007000.flow-controller to group 9 [ 0.055514] iommu: Adding device 6000a000.dma to group 10 [ 0.055548] iommu: Adding device 6000c000.ahb to group 11 [ 0.055582] iommu: Adding device 6000d000.gpio to group 12 [ 0.055614] iommu: Adding device 70000800.apbmisc to group 13 [ 0.055647] iommu: Adding device 70000868.pinmux to group 14 [ 0.055680] iommu: Adding device 70006300.serial to group 15 [ 0.055713] iommu: Adding device 7000a000.pwm to group 16 [ 0.055751] iommu: Adding device 7000c000.i2c to group 17 [ 0.055788] iommu: Adding device 7000c700.i2c to group 18 [ 0.055823] iommu: Adding device 7000d000.i2c to group 19 [ 0.055856] iommu: Adding device 7000da00.spi to group 20 [ 0.055888] iommu: Adding device 7000e000.rtc to group 21 [ 0.055921] iommu: Adding device 7000e400.pmc to group 22 [ 0.055953] iommu: Adding device 7000f800.fuse to group 23 [ 0.055986] iommu: Adding device 70019000.memory-controller to group 24 [ 0.056019] iommu: Adding device 70080000.ahub to group 25 [ 0.056056] iommu: Adding device 700e3000.mipi to group 26 [ 0.056093] iommu: Adding device 78000400.sdhci to group 27 [ 0.056131] iommu: Adding device 78000600.sdhci to group 28 [ 0.056165] iommu: Adding device 7d000000.usb to group 29 [ 0.056200] iommu: Adding device 7d000000.usb-phy to group 30 [ 0.056234] iommu: Adding device 7d008000.usb to group 31 [ 0.056269] iommu: Adding device 7d008000.usb-phy to group 32 [ 0.056302] iommu: Adding device timer to group 33 [ 0.056340] iommu: Adding device backlight to group 34 [ 0.056372] iommu: Adding device clocks to group 35 [ 0.056404] iommu: Adding device gpio-keys to group 36 [ 0.056436] iommu: Adding device regulators to group 37 [ 0.056470] iommu: Adding device regulators:regulator@0 to group 38 [ 0.056508] iommu: Adding device regulators:regulator@1 to group 39 [ 0.056541] iommu: Adding device regulators:regulator@3 to group 40 [ 0.056575] iommu: Adding device regulators:regulator@4 to group 41 [ 0.056609] iommu: Adding device regulators:regulator@5 to group 42 [ 0.056646] iommu: Adding device regulators:regulator@6 to group 43 [ 0.056681] iommu: Adding device regulators:regulator@7 to group 44 [ 0.056713] iommu: Adding device sound to group 45 [ 0.070562] AT91: Could not find identification node [ 0.071040] dvdd_ts: Failed to request enable GPIO61: -517 [ 0.071062] reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517 [ 0.071168] usb1_vbus: Failed to request enable GPIO108: -517 [ 0.071183] reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517 [ 0.071287] usb2_vbus: Failed to request enable GPIO86: -517 [ 0.071302] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ 0.071726] VDD_5V0_HDMI_CON: Failed to request enable GPIO81: -517 [ 0.071742] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.074168] vgaarb: loaded [ 0.074858] SCSI subsystem initialized [ 0.075030] libata version 3.00 loaded. [ 0.075224] usbcore: registered new interface driver usbfs [ 0.075273] usbcore: registered new interface driver hub [ 0.075347] usbcore: registered new device driver usb [ 0.078559] tps65090 2-0048: No cache defaults, reading back from HW [ 0.079561] iommu: Adding device tps65090-pmic to group 46 [ 0.080502] TPS65090_RAILSDCDC1: supplied by vdd_ac_bat [ 0.081559] TPS65090_RAILSDCDC2: supplied by vdd_ac_bat [ 0.082606] TPS65090_RAILSDCDC3: supplied by vdd_ac_bat [ 0.083116] TPS65090_RAILSFET1: supplied by vdd_ac_bat [ 0.083488] TPS65090_RAILSFET2: supplied by vdd_ac_bat [ 0.083829] TPS65090_RAILSFET3: supplied by vdd-sys-3v3 [ 0.084343] TPS65090_RAILSFET4: supplied by vdd-sys-3v3 [ 0.084861] TPS65090_RAILSFET5: supplied by vdd-sys-3v3 [ 0.085368] TPS65090_RAILSFET6: supplied by vdd-sys-3v3 [ 0.086198] TPS65090_RAILSFET7: supplied by vdd-sys-3v3 [ 0.086714] TPS65090_RAILSLDO1: supplied by vdd_ac_bat [ 0.086902] TPS65090_RAILSLDO2: supplied by vdd_ac_bat [ 0.087222] iommu: Adding device tps65090-charger to group 47 [ 0.087805] palmas 2-0058: Irq flag is 0x00000004 [ 0.089747] palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0 [ 0.089982] iommu: Adding device 7000d000.i2c:tps65913@58:gpio to group 48 [ 0.090501] iommu: Adding device 7000d000.i2c:tps65913@58:pmic to group 49 [ 0.092302] SMPS12: supplied by vdd-ao [ 0.093329] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 0.094141] SMPS3: supplied by vdd-ao [ 0.095857] SMPS457: supplied by vdd-sys-3v3 [ 0.097475] SMPS6: supplied by regulator-dummy [ 0.098870] SMPS8: supplied by vdd-sys-3v3 [ 0.100433] SMPS9: supplied by vdd-sys-3v3 [ 0.100949] sdhci-vdd-sd-slot: Bringing 2840000uV into 2800000-2800000uV [ 0.102321] SMPS10_OUT2: supplied by regulator-dummy [ 0.103141] SMPS10_OUT1: supplied by regulator-dummy [ 0.103992] LDO1: supplied by vdd-sys-3v3 [ 0.105095] LDO2: supplied by vdd-sys-3v3 [ 0.106210] LDO3: supplied by vddio-1v8 [ 0.107296] LDO4: supplied by vdd-sys-3v3 [ 0.108397] LDO5: supplied by vdd_ac_bat [ 0.109075] LDO6: supplied by vdd-sys-3v3 [ 0.109589] vdd-sensor-2v85: Bringing 2900000uV into 2850000-2850000uV [ 0.110904] LDO7: supplied by vdd-sys-3v3 [ 0.112522] LDO8: supplied by vdd-ao [ 0.113050] vdd-rtc: Bringing 675000uV into 900000-900000uV [ 0.123936] LDO9: supplied by sdhci-vdd-sd-slot [ 0.134258] LDOLN: supplied by vdd-sys-5v0 [ 0.135368] LDOUSB: supplied by vdd-sys-5v0 [ 0.145685] iommu: Adding device 7000d000.i2c:tps65913@58:rtc to group 50 [ 0.146097] iommu: Adding device 7000d000.i2c:tps65913@58:pinmux to group 51 [ 0.146654] pps_core: LinuxPPS API ver. 1 registered [ 0.146665] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.146688] PTP clock support registered [ 0.146872] EDAC MC: Ver: 3.0.0 [ 0.147145] dmi: Firmware registration failed. [ 0.148921] clocksource: Switched to clocksource arch_sys_counter [ 0.204516] NET: Registered protocol family 2 [ 0.205019] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.205120] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.205308] TCP: Hash tables configured (established 8192 bind 8192) [ 0.205392] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.205435] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.205584] NET: Registered protocol family 1 [ 0.205933] RPC: Registered named UNIX socket transport module. [ 0.205944] RPC: Registered udp transport module. [ 0.205954] RPC: Registered tcp transport module. [ 0.205964] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.205977] PCI: CLS 0 bytes, default 64 [ 0.207402] iommu: Adding device alarmtimer to group 52 [ 0.208208] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.214134] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.214714] NFS: Registering the id_resolver key type [ 0.214740] Key type id_resolver registered [ 0.214750] Key type id_legacy registered [ 0.214792] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.216188] bounce: pool size: 64 pages [ 0.216240] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.216252] io scheduler noop registered [ 0.216263] io scheduler deadline registered [ 0.216476] io scheduler cfq registered (default) [ 0.216488] io scheduler mq-deadline registered [ 0.216498] io scheduler kyber registered [ 0.247561] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 0.250165] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.299582] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.299683] iommu: Adding device serial8250 to group 53 [ 0.302232] console [ttyS0] disabled [ 0.302274] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 329, base_baud = 25500000) is a Tegra [ 1.617598] console [ttyS0] enabled [ 1.621851] SuperH (H)SCI(F) driver initialized [ 1.627349] msm_serial: driver initialized [ 1.631643] STMicroelectronics ASC driver initialized [ 1.642579] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.664149] brd: module loaded [ 1.673828] loop: module loaded [ 1.694039] m25p80 spi0.0: w25q32dw (4096 Kbytes) [ 1.700924] iommu: Adding device Fixed MDIO bus.0 to group 54 [ 1.707094] libphy: Fixed MDIO Bus: probed [ 1.712227] CAN device driver interface [ 1.716876] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.723745] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.729587] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.735545] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.742508] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.751467] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.758894] usbcore: registered new interface driver pegasus [ 1.764608] usbcore: registered new interface driver asix [ 1.770047] usbcore: registered new interface driver ax88179_178a [ 1.776158] usbcore: registered new interface driver cdc_ether [ 1.782038] usbcore: registered new interface driver smsc75xx [ 1.787816] usbcore: registered new interface driver smsc95xx [ 1.793599] usbcore: registered new interface driver net1080 [ 1.799298] usbcore: registered new interface driver cdc_subset [ 1.805234] usbcore: registered new interface driver zaurus [ 1.810862] usbcore: registered new interface driver cdc_ncm [ 1.816732] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.824115] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.830655] ehci-pci: EHCI PCI platform driver [ 1.835125] ehci-platform: EHCI generic platform driver [ 1.840549] ehci-orion: EHCI orion driver [ 1.844702] SPEAr-ehci: EHCI SPEAr driver [ 1.848834] ehci-st: EHCI STMicroelectronics driver [ 1.853853] ehci-exynos: EHCI EXYNOS driver [ 1.858169] ehci-atmel: EHCI Atmel driver [ 1.862310] tegra-ehci: Tegra EHCI driver [ 1.866609] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.872823] ohci-pci: OHCI PCI platform driver [ 1.877295] ohci-platform: OHCI generic platform driver [ 1.882694] SPEAr-ohci: OHCI SPEAr driver [ 1.886824] ohci-st: OHCI STMicroelectronics driver [ 1.891843] ohci-atmel: OHCI Atmel driver [ 1.896507] usbcore: registered new interface driver usb-storage [ 1.906393] iommu: Adding device ci_hdrc.0 to group 55 [ 1.920089] palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps65913@58:rtc as rtc0 [ 1.931878] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.939071] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.945751] i2c /dev entries driver [ 1.952587] IR NEC protocol handler initialized [ 1.957112] IR RC5(x/sz) protocol handler initialized [ 1.962179] IR RC6 protocol handler initialized [ 1.966702] IR JVC protocol handler initialized [ 1.971239] IR Sony protocol handler initialized [ 1.975849] IR SANYO protocol handler initialized [ 1.980560] IR Sharp protocol handler initialized [ 1.985256] IR MCE Keyboard/mouse protocol handler initialized [ 1.991092] IR XMP protocol handler initialized [ 1.998725] sbs-battery 0-000b: sbs_probe: Failed to get device status [ 2.005281] sbs-battery: probe of 0-000b failed with error -121 [ 2.021421] sdhci: Secure Digital Host Controller Interface driver [ 2.027593] sdhci: Copyright(c) Pierre Ossman [ 2.033441] Synopsys Designware Multimedia Card Interface Driver [ 2.040656] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.047035] sdhci-tegra 78000400.sdhci: Got CD GPIO [ 2.051947] sdhci-tegra 78000400.sdhci: Got WP GPIO [ 2.065055] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.129071] mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA [ 2.145788] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.208965] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 2.218381] ledtrig-cpu: registered to indicate activity on CPUs [ 2.224688] usbcore: registered new interface driver usbhid [ 2.230272] usbhid: USB HID core driver [ 2.237793] NET: Registered protocol family 10 [ 2.243062] Segment Routing with IPv6 [ 2.246785] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.253251] NET: Registered protocol family 17 [ 2.257698] can: controller area network core (rev 20170425 abi 9) [ 2.263951] NET: Registered protocol family 29 [ 2.268392] can: raw protocol (rev 20170425) [ 2.272682] can: broadcast manager protocol (rev 20170425 t) [ 2.278340] can: netlink gateway (rev 20170425) max_hops=1 [ 2.284106] Key type dns_resolver registered [ 2.288876] ThumbEE CPU extension supported. [ 2.293170] Registering SWP/SWPB emulation handler [ 2.314134] usb1_vbus: supplied by vdd-sys-5v0 [ 2.315653] mmc0: new high speed SDHC card at address aaaa [ 2.316439] mmcblk0: mmc0:aaaa SL16G 14.8 GiB [ 2.329732] usb2_vbus: supplied by vdd-sys-5v0 [ 2.336839] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.337196] mmcblk0: p1 p2 p3 [ 2.351236] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.357854] [drm] No driver support for vblank timestamp query. [ 2.368015] mmc1: new high speed MMC card at address 0001 [ 2.374117] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.378860] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.385374] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.391996] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.396727] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 [ 2.459961] Console: switching to colour frame buffer device 240x75 [ 2.509753] drm drm: fb0: frame buffer device [ 2.514292] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 2.524395] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.529871] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.537682] tegra-ehci 7d008000.usb: irq 340, io mem 0x7d008000 [ 2.569049] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.576100] hub 1-0:1.0: USB hub found [ 2.579967] hub 1-0:1.0: 1 port detected [ 2.585639] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.594543] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-03-22 20:29:32 UTC (953756972) [ 2.610316] dvdd_ts: disabling [ 2.613376] usb1_vbus: disabling [ 2.616601] vdd_cam_1v8_reg: disabling [ 2.622039] EXT4-fs (mmcblk1p1): mounting ext3 file system using the ext4 subsystem [ 2.704798] EXT4-fs (mmcblk1p1): recovery complete [ 2.711021] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.719209] VFS: Mounted root (ext3 filesystem) on device 179:17. [ 2.729826] devtmpfs: mounted [ 2.734659] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 2.949079] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.632263] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:b5:16