U-Boot SPL 2015.04-rc3-00209-ga74ef40 (Mar 16 2015 - 14:43:39) U-Boot 2015.04-rc3-00209-ga74ef40 (Mar 16 2015 - 14:43:39) TEGRA20 Model: Compulab TrimSlice board DRAM: 1 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 SF: Detected W25Q80BL with page size 256 Bytes, erase size 4 KiB, total 1 MiB tegra-pcie: PCI regions: tegra-pcie: I/O: 0x82000000-0x82010000 tegra-pcie: non-prefetchable memory: 0xa0000000-0xa8000000 tegra-pcie: prefetchable memory: 0xa8000000-0xc0000000 tegra-pcie: dual-mode configuration tegra-pcie: probing port 0, using 2 lanes In: serial Out: serial Err: serial Net: RTL8169#0 Hit any key to stop autoboot: 2  0 Tegra20 (TrimSlice) # Tegra20 (TrimSlice) # usb reset resetting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found USB1: USB EHCI 1.00 scanning bus 1 for devices... 1 USB Device(s) found USB2: lowlevel init failed scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra20 (TrimSlice) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra20 (TrimSlice) # setenv ipaddr 192.168.100.103; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra20 (TrimSlice) # tftpboot 0x00408000 zImage.multi_v7_defconfig Using RTL8169#0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.103 Filename 'zImage.multi_v7_defconfig'. Load address: 0x408000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 3.5 MiB/s done Bytes transferred = 8159752 (7c8208 hex) Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb Using RTL8169#0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.103 Filename 'tegra20-trimslice.dtb'. Load address: 0x2408000 Loading: *## 2.9 MiB/s done Bytes transferred = 21454 (53ce hex) Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000 Kernel image @ 0x408000 [ 0x000000 - 0x7c8200 ] ## Flattened Device Tree blob at 02408000 Booting using the fdt blob at 0x2408000 Using Device Tree in place at 02408000, end 024103cd Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.0-rc6-201169-gbb176f6 (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Mon Oct 23 13:49:41 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Compulab TrimSlice board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x3c000000 [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c158fa40, node_mem_map ef7f8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @ef7c4000 s39424 r8192 d22016 u69632 [ 0.000000] pcpu-alloc: s39424 r8192 d22016 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=11eb23c1-01 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 954308K/1048576K available (10240K kernel code, 1631K rwdata, 4504K rodata, 2048K init, 406K bss, 28732K reserved, 65536K cma-reserved, 196608K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc1597ee8 (1632 kB) [ 0.000000] .bss : 0xc15a0b9c - 0xc16064fc ( 407 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 128 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001 [ 0.000000] L2C-310 errata 727915 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 cache controller enabled, 8 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e480001 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000025] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000036] Switching to timer-based delay loop, resolution 1000ns [ 0.001704] Console: colour dummy device 80x30 [ 0.001734] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) [ 0.001746] pid_max: default: 32768 minimum: 301 [ 0.001837] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001848] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002284] CPU: Testing write buffer coherency: ok [ 0.002491] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002723] Setting up static identity map for 0x300000 - 0x3000a0 [ 0.003358] Hierarchical SRCU implementation. [ 0.004194] Tegra Revision: A03 prime SKU: 8 CPU Process: 1 SoC Process: 2 [ 0.004641] EFI services will not be available. [ 0.004731] smp: Bringing up secondary CPUs ... [ 0.005247] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.005330] smp: Brought up 1 node, 2 CPUs [ 0.005341] SMP: Total of 2 processors activated (4.00 BogoMIPS). [ 0.005347] CPU: All CPU(s) started in SVC mode. [ 0.006002] devtmpfs: initialized [ 0.009706] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1 [ 0.009961] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.009978] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.012966] pinctrl core: initialized pinctrl subsystem [ 0.013888] DMI not present or invalid. [ 0.014115] NET: Registered protocol family 16 [ 0.016406] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.017744] cpuidle: using governor menu [ 0.033407] No ATAGs? [ 0.033472] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.033483] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.038167] Serial: AMBA PL011 UART driver [ 0.048498] AT91: Could not find identification node [ 0.049005] usb1_vbus: Failed to request enable GPIO170: -517 [ 0.049022] reg-fixed-voltage regulators:regulator@2: Failed to register regulator: -517 [ 0.052442] vgaarb: loaded [ 0.052988] SCSI subsystem initialized [ 0.053113] libata version 3.00 loaded. [ 0.053296] usbcore: registered new interface driver usbfs [ 0.053334] usbcore: registered new interface driver hub [ 0.053382] usbcore: registered new device driver usb [ 0.055341] pps_core: LinuxPPS API ver. 1 registered [ 0.055349] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.055366] PTP clock support registered [ 0.055511] EDAC MC: Ver: 3.0.0 [ 0.055757] dmi: Firmware registration failed. [ 0.057174] clocksource: Switched to clocksource timer_us [ 0.095404] NET: Registered protocol family 2 [ 0.095841] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.095911] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.096025] TCP: Hash tables configured (established 8192 bind 8192) [ 0.096141] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.096192] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.096356] NET: Registered protocol family 1 [ 0.096661] RPC: Registered named UNIX socket transport module. [ 0.096669] RPC: Registered udp transport module. [ 0.096674] RPC: Registered tcp transport module. [ 0.096679] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.096689] PCI: CLS 0 bytes, default 64 [ 0.097548] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.097709] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.098848] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 0.103270] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.103736] NFS: Registering the id_resolver key type [ 0.103762] Key type id_resolver registered [ 0.103768] Key type id_legacy registered [ 0.103800] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.104904] bounce: pool size: 64 pages [ 0.104951] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.104960] io scheduler noop registered [ 0.104966] io scheduler deadline registered [ 0.105136] io scheduler cfq registered (default) [ 0.105144] io scheduler mq-deadline registered [ 0.105150] io scheduler kyber registered [ 0.116692] tegra-pcie 80003000.pcie: dual-mode configuration [ 0.117427] tegra-pcie 80003000.pcie: probing port 0, using 2 lanes [ 0.201323] tegra-pcie 80003000.pcie: PCI host bridge to bus 0000:00 [ 0.201335] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.201344] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xa7ffffff] [ 0.201353] pci_bus 0000:00: root bus resource [mem 0xa8000000-0xbfffffff pref] [ 0.201362] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.201394] pci 0000:00:01.0: [10de:0bf0] type 01 class 0x060000 [ 0.201414] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 0.201425] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 0.201444] pci 0000:00:01.0: enabling Extended Tags [ 0.201454] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 0.201480] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 0.201504] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.201515] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 0.201671] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 0.201684] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 0.201694] pci_bus 0000:00: 1-byte config write to 0000:00:01.0 offset 0xc may corrupt adjacent RW1C bits [ 0.201701] PCI: bus0: Fast back to back transfers disabled [ 0.201710] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.201719] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 0.201730] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x3e may corrupt adjacent RW1C bits [ 0.201843] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 0.201877] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 0.201902] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 0.201920] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 0.201934] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.202010] pci 0000:01:00.0: supports D1 D2 [ 0.202018] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.227204] PCI: bus1: Fast back to back transfers disabled [ 0.227217] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.227245] pci 0000:00:01.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff] [ 0.227257] pci 0000:00:01.0: BAR 9: assigned [mem 0xa8000000-0xa80fffff 64bit pref] [ 0.227266] pci 0000:00:01.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.227278] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0000000-0xa001ffff pref] [ 0.227288] pci 0000:01:00.0: BAR 4: assigned [mem 0xa8000000-0xa8003fff 64bit pref] [ 0.227308] pci 0000:01:00.0: BAR 2: assigned [mem 0xa8004000-0xa8004fff 64bit pref] [ 0.227326] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 0.227338] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.227346] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 0.227355] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xa00fffff] [ 0.227363] pci 0000:00:01.0: bridge window [mem 0xa8000000-0xa80fffff 64bit pref] [ 0.227386] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 0.227439] Disabling cpuidle LP2 state, since PCIe IRQs are in use [ 0.227474] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 0.227659] pcieport 0000:00:01.0: Signaling PME with IRQ 295 [ 0.233567] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels [ 0.273777] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.275919] console [ttyS0] disabled [ 0.275956] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 279, base_baud = 13500000) is a Tegra [ 1.359143] console [ttyS0] enabled [ 1.363196] SuperH (H)SCI(F) driver initialized [ 1.368478] msm_serial: driver initialized [ 1.372697] STMicroelectronics ASC driver initialized [ 1.382030] tegra-hdmi 54280000.hdmi: 54280000.hdmi supply hdmi not found, using dummy regulator [ 1.393101] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.399733] [drm] No driver support for vblank timestamp query. [ 1.405666] [drm] Cannot find any crtc or sizes [ 1.410232] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 1.418220] [drm] Cannot find any crtc or sizes [ 1.427879] brd: module loaded [ 1.436088] loop: module loaded [ 1.445145] m25p80 spi0.0: found s25fl008k, expected w25q80bl [ 1.450971] m25p80 spi0.0: s25fl008k (1024 Kbytes) [ 1.457766] libphy: Fixed MDIO Bus: probed [ 1.462561] CAN device driver interface [ 1.467032] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.473612] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.479445] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.485403] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.492362] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.498481] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.504063] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 1.510544] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xf0a5c000, 00:01:c0:13:7d:63, XID 081000c0 IRQ 296 [ 1.520207] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.530901] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.538346] usbcore: registered new interface driver pegasus [ 1.544030] usbcore: registered new interface driver asix [ 1.549465] usbcore: registered new interface driver ax88179_178a [ 1.555570] usbcore: registered new interface driver cdc_ether [ 1.561433] usbcore: registered new interface driver smsc75xx [ 1.567215] usbcore: registered new interface driver smsc95xx [ 1.572968] usbcore: registered new interface driver net1080 [ 1.578647] usbcore: registered new interface driver cdc_subset [ 1.584579] usbcore: registered new interface driver zaurus [ 1.590190] usbcore: registered new interface driver cdc_ncm [ 1.596106] tegra-phy c5004000.usb-phy: no vbus regulator [ 1.602618] tegra-phy c5008000.usb-phy: no vbus regulator [ 1.609328] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.615840] ehci-pci: EHCI PCI platform driver [ 1.620320] ehci-platform: EHCI generic platform driver [ 1.625679] ehci-orion: EHCI orion driver [ 1.629814] SPEAr-ehci: EHCI SPEAr driver [ 1.633910] ehci-st: EHCI STMicroelectronics driver [ 1.638887] ehci-exynos: EHCI EXYNOS driver [ 1.643167] ehci-atmel: EHCI Atmel driver [ 1.647276] tegra-ehci: Tegra EHCI driver [ 1.708382] ulpi_phy_power_on: ulpi write failed [ 1.712990] tegra-ehci c5004000.usb: Failed to power on the phy [ 1.718926] tegra-ehci: probe of c5004000.usb failed with error -110 [ 1.727901] tegra-ehci c5008000.usb: EHCI Host Controller [ 1.733304] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1 [ 1.741032] tegra-ehci c5008000.usb: irq 290, io mem 0xc5008000 [ 1.767196] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00 [ 1.773662] hub 1-0:1.0: USB hub found [ 1.777445] hub 1-0:1.0: 1 port detected [ 1.781663] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.787870] ohci-pci: OHCI PCI platform driver [ 1.792341] ohci-platform: OHCI generic platform driver [ 1.797735] SPEAr-ohci: OHCI SPEAr driver [ 1.801834] ohci-st: OHCI STMicroelectronics driver [ 1.806794] ohci-atmel: OHCI Atmel driver [ 1.811367] usbcore: registered new interface driver usb-storage [ 1.820370] rtc-em3027 2-0056: rtc core: registered rtc-em3027 as rtc0 [ 1.828014] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.835166] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.841752] i2c /dev entries driver [ 1.847822] IR NEC protocol handler initialized [ 1.852340] IR RC5(x/sz) protocol handler initialized [ 1.857392] IR RC6 protocol handler initialized [ 1.861908] IR JVC protocol handler initialized [ 1.866423] IR Sony protocol handler initialized [ 1.871035] IR SANYO protocol handler initialized [ 1.875724] IR Sharp protocol handler initialized [ 1.880422] IR MCE Keyboard/mouse protocol handler initialized [ 1.886238] IR XMP protocol handler initialized [ 1.897609] sdhci: Secure Digital Host Controller Interface driver [ 1.903773] sdhci: Copyright(c) Pierre Ossman [ 1.909280] Synopsys Designware Multimedia Card Interface Driver [ 1.916196] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.930605] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.997356] mmc0: SDHCI controller on c8000000.sdhci [c8000000.sdhci] using ADMA [ 2.005241] sdhci-tegra c8000600.sdhci: Got CD GPIO [ 2.010311] sdhci-tegra c8000600.sdhci: Got WP GPIO [ 2.023697] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.087794] mmc1: SDHCI controller on c8000600.sdhci [c8000600.sdhci] using ADMA [ 2.103670] ledtrig-cpu: registered to indicate activity on CPUs [ 2.109983] usbcore: registered new interface driver usbhid [ 2.115543] usbhid: USB HID core driver [ 2.123102] NET: Registered protocol family 10 [ 2.130788] Segment Routing with IPv6 [ 2.134486] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.140839] NET: Registered protocol family 17 [ 2.145276] can: controller area network core (rev 20170425 abi 9) [ 2.151512] NET: Registered protocol family 29 [ 2.155945] can: raw protocol (rev 20170425) [ 2.160221] can: broadcast manager protocol (rev 20170425 t) [ 2.165870] can: netlink gateway (rev 20170425) max_hops=1 [ 2.171638] Key type dns_resolver registered [ 2.176255] ThumbEE CPU extension supported. [ 2.177206] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 2.187234] Registering SWP/SWPB emulation handler [ 2.202815] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 2.209321] tegra-ehci c5000000.usb: EHCI Host Controller [ 2.214735] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2 [ 2.222525] tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000 [ 2.267286] mmc1: new high speed SD card at address b368 [ 2.273990] mmcblk1: mmc1:b368 NCard 1.83 GiB (ro) [ 2.281531] mmcblk1: p1 p2 [ 2.357327] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.365323] hub 2-0:1.0: USB hub found [ 2.369160] hub 2-0:1.0: 1 port detected [ 2.374648] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.381568] rtc-em3027 2-0056: hctosys: unable to read the hardware clock [ 2.388011] hub 1-1:1.0: USB hub found [ 2.388162] hub 1-1:1.0: 4 ports detected [ 2.396706] Waiting for root device PARTUUID=11eb23c1-01... [ 2.707357] usb 1-1.2: new high-speed USB device number 3 using tegra-ehci [ 3.275113] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.285086] mmc0: new high speed SDHC card at address b368 [ 3.290987] mmcblk0: mmc0:b368 NCard 3.70 GiB [ 3.297947] mmcblk0: p1 [ 3.330329] asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68 [ 3.342753] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 3.863460] EXT4-fs (mmcblk0p1): recovery complete [ 3.936450] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.944714] VFS: Mounted root (ext3 filesystem) on device 179:17. [ 3.954682] devtmpfs: mounted [ 3.959210] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# root@(none):/#