U-Boot SPL 2016.05-rc2 (Apr 21 2016 - 16:23:00) Trying to boot from RAM U-Boot 2016.05-rc2 (Apr 21 2016 - 16:23:00 -0700) TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB MC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Jetson TK1) # Tegra124 (Jetson TK1) # pci enum Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Jetson TK1) # tftpboot 0x82000000 zImage.multi_v7_defconfig Warning: eth_rtl8169 using MAC address from ROM Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################### 3.9 MiB/s done Bytes transferred = 8159752 (7c8208 hex) Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb Using eth_rtl8169 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 3.8 MiB/s done Bytes transferred = 67173 (10665 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x7c8200 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013664 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.0-rc5-200827-g33d930e (jonathanh@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04)) #1 SMP Sun Oct 15 18:35:51 PDT 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: NVIDIA Tegra124 Jetson TK1 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c158fa40, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327424 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 17 pages/cpu @eef82000 s39424 r8192 d22016 u69632 [ 0.000000] pcpu-alloc: s39424 r8192 d22016 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522496 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=b1791faa-84e8-4e27-83a1-9fb0a77e8803 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1993356K/2096128K available (10240K kernel code, 1631K rwdata, 4504K rodata, 2048K init, 406K bss, 37236K reserved, 65536K cma-reserved, 1244160K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0d00000 (11232 kB) [ 0.000000] .init : 0xc1200000 - 0xc1400000 (2048 kB) [ 0.000000] .data : 0xc1400000 - 0xc1597ee8 (1632 kB) [ 0.000000] .bss : 0xc15a0b90 - 0xc16064bc ( 407 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU event tracing is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000029] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000045] Switching to timer-based delay loop, resolution 1000ns [ 0.005568] arch_timer: cp15 timer(s) running at 12.00MHz (virt). [ 0.005587] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.005606] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.005620] Switching to timer-based delay loop, resolution 83ns [ 0.006071] Console: colour dummy device 80x30 [ 0.006103] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.006121] pid_max: default: 32768 minimum: 301 [ 0.006222] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006238] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006736] CPU: Testing write buffer coherency: ok [ 0.006988] /cpus/cpu@0 missing clock-frequency property [ 0.007033] /cpus/cpu@1 missing clock-frequency property [ 0.007077] /cpus/cpu@2 missing clock-frequency property [ 0.007121] /cpus/cpu@3 missing clock-frequency property [ 0.007135] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.007436] Setting up static identity map for 0x80300000 - 0x803000a0 [ 0.009453] Hierarchical SRCU implementation. [ 0.011394] Tegra Revision: A01 SKU: 129 CPU Process: 1 SoC Process: 1 [ 0.012186] EFI services will not be available. [ 0.012334] smp: Bringing up secondary CPUs ... [ 0.012803] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.015987] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.026025] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.035558] smp: Brought up 1 node, 4 CPUs [ 0.035579] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.035588] CPU: All CPU(s) started in SVC mode. [ 0.037107] devtmpfs: initialized [ 0.050702] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.051092] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.051111] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.052566] pinctrl core: initialized pinctrl subsystem [ 0.054118] DMI not present or invalid. [ 0.054359] NET: Registered protocol family 16 [ 0.056484] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.058885] cpuidle: using governor menu [ 0.084002] No ATAGs? [ 0.084129] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.084146] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.091468] Serial: AMBA PL011 UART driver [ 0.092659] iommu: Adding device reg-dummy to group 0 [ 0.092698] iommu: Adding device 1003000.pcie to group 1 [ 0.092778] iommu: Adding device 50000000.host1x to group 2 [ 0.092849] iommu: Adding device 54200000.dc to group 3 [ 0.092917] iommu: Adding device 54240000.dc to group 4 [ 0.092954] iommu: Adding device 54280000.hdmi to group 5 [ 0.093027] iommu: Adding device 57000000.gpu to group 6 [ 0.093060] iommu: Adding device 60005000.timer to group 7 [ 0.093091] iommu: Adding device 60007000.flow-controller to group 8 [ 0.093122] iommu: Adding device 6000c800.actmon to group 9 [ 0.093154] iommu: Adding device 6000d000.gpio to group 10 [ 0.093186] iommu: Adding device 60020000.dma to group 11 [ 0.093221] iommu: Adding device 70000800.apbmisc to group 12 [ 0.093256] iommu: Adding device 70000868.pinmux to group 13 [ 0.093287] iommu: Adding device 70006000.serial to group 14 [ 0.093317] iommu: Adding device 70006040.serial to group 15 [ 0.093348] iommu: Adding device 70006300.serial to group 16 [ 0.093378] iommu: Adding device 7000c000.i2c to group 17 [ 0.093409] iommu: Adding device 7000c400.i2c to group 18 [ 0.093440] iommu: Adding device 7000c500.i2c to group 19 [ 0.093472] iommu: Adding device 7000c700.i2c to group 20 [ 0.093503] iommu: Adding device 7000d000.i2c to group 21 [ 0.093541] iommu: Adding device 7000d400.spi to group 22 [ 0.093572] iommu: Adding device 7000da00.spi to group 23 [ 0.093603] iommu: Adding device 7000e000.rtc to group 24 [ 0.093633] iommu: Adding device 7000e400.pmc to group 25 [ 0.093664] iommu: Adding device 7000f800.fuse to group 26 [ 0.093695] iommu: Adding device 70019000.memory-controller to group 27 [ 0.093725] iommu: Adding device 7001b000.emc to group 28 [ 0.093755] iommu: Adding device 70027000.sata to group 29 [ 0.093789] iommu: Adding device 70030000.hda to group 30 [ 0.093822] iommu: Adding device 70090000.usb to group 31 [ 0.093852] iommu: Adding device 7009f000.padctl to group 32 [ 0.093888] iommu: Adding device 700b0400.sdhci to group 33 [ 0.093919] iommu: Adding device 700b0600.sdhci to group 34 [ 0.093950] iommu: Adding device 700e2000.thermal-sensor to group 35 [ 0.093980] iommu: Adding device 70110000.clock to group 36 [ 0.094014] iommu: Adding device 70300000.ahub to group 37 [ 0.094045] iommu: Adding device 7d000000.usb to group 38 [ 0.094081] iommu: Adding device 7d000000.usb-phy to group 39 [ 0.094112] iommu: Adding device 7d004000.usb to group 40 [ 0.094143] iommu: Adding device 7d004000.usb-phy to group 41 [ 0.094173] iommu: Adding device 7d008000.usb to group 42 [ 0.094204] iommu: Adding device 7d008000.usb-phy to group 43 [ 0.094239] iommu: Adding device pmu to group 44 [ 0.094270] iommu: Adding device timer to group 45 [ 0.094302] iommu: Adding device clocks to group 46 [ 0.094336] iommu: Adding device gpio-keys to group 47 [ 0.094369] iommu: Adding device regulators to group 48 [ 0.094400] iommu: Adding device regulators:regulator@0 to group 49 [ 0.094430] iommu: Adding device regulators:regulator@1 to group 50 [ 0.094461] iommu: Adding device regulators:regulator@2 to group 51 [ 0.094492] iommu: Adding device regulators:regulator@3 to group 52 [ 0.094524] iommu: Adding device regulators:regulator@4 to group 53 [ 0.094560] iommu: Adding device regulators:regulator@7 to group 54 [ 0.094595] iommu: Adding device regulators:regulator@8 to group 55 [ 0.094627] iommu: Adding device regulators:regulator@10 to group 56 [ 0.094658] iommu: Adding device regulators:regulator@11 to group 57 [ 0.094689] iommu: Adding device regulators:regulator@12 to group 58 [ 0.094720] iommu: Adding device regulators:regulator@13 to group 59 [ 0.094750] iommu: Adding device regulators:regulator@14 to group 60 [ 0.094781] iommu: Adding device sound to group 61 [ 0.109381] AT91: Could not find identification node [ 0.109940] +5V_SYS: supplied by +VDD_MUX [ 0.110216] +3.3V_SYS: supplied by +VDD_MUX [ 0.110833] +USB0_VBUS_SW: Failed to request enable GPIO108: -517 [ 0.110849] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.110948] +5V_USB_HS: Failed to request enable GPIO109: -517 [ 0.110962] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.111149] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.111163] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.111260] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.111274] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.111368] +5V_SATA: Failed to request enable GPIO242: -517 [ 0.111381] reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517 [ 0.111475] +12V_SATA: Failed to request enable GPIO242: -517 [ 0.111488] reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517 [ 0.114460] vgaarb: loaded [ 0.115184] SCSI subsystem initialized [ 0.115347] libata version 3.00 loaded. [ 0.115539] usbcore: registered new interface driver usbfs [ 0.115586] usbcore: registered new interface driver hub [ 0.115673] usbcore: registered new device driver usb [ 0.119111] pps_core: LinuxPPS API ver. 1 registered [ 0.119122] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.119144] PTP clock support registered [ 0.119333] EDAC MC: Ver: 3.0.0 [ 0.119623] dmi: Firmware registration failed. [ 0.122259] clocksource: Switched to clocksource arch_sys_counter [ 0.176704] NET: Registered protocol family 2 [ 0.177189] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.177290] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.177477] TCP: Hash tables configured (established 8192 bind 8192) [ 0.177558] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.177602] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.177751] NET: Registered protocol family 1 [ 0.178128] RPC: Registered named UNIX socket transport module. [ 0.178139] RPC: Registered udp transport module. [ 0.178148] RPC: Registered tcp transport module. [ 0.178156] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.178169] PCI: CLS 0 bytes, default 64 [ 0.179617] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.180346] iommu: Adding device alarmtimer to group 62 [ 0.181238] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.186908] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.187466] NFS: Registering the id_resolver key type [ 0.187497] Key type id_resolver registered [ 0.187506] Key type id_legacy registered [ 0.187548] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.188918] bounce: pool size: 64 pages [ 0.188962] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.188974] io scheduler noop registered [ 0.188983] io scheduler deadline registered [ 0.189186] io scheduler cfq registered (default) [ 0.189197] io scheduler mq-deadline registered [ 0.189206] io scheduler kyber registered [ 0.192926] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 0.193044] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 0.193502] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.212296] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 0.212356] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 0.218462] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 0.225285] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.228196] tegra-pmc 7000e400.pmc: emergency thermal reset enabled [ 0.275359] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.275456] iommu: Adding device serial8250 to group 63 [ 0.277921] console [ttyS0] disabled [ 0.277960] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 335, base_baud = 25500000) is a Tegra [ 1.541267] console [ttyS0] enabled [ 1.545646] SuperH (H)SCI(F) driver initialized [ 1.551270] msm_serial: driver initialized [ 1.555582] STMicroelectronics ASC driver initialized [ 1.561520] 70006000.serial: ttyTHS1 at MMIO 0x70006000 (irq = 333, base_baud = 0) is a TEGRA_UART [ 1.570779] 70006040.serial: ttyTHS2 at MMIO 0x70006040 (irq = 334, base_baud = 0) is a TEGRA_UART [ 1.585710] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.602385] brd: module loaded [ 1.611631] loop: module loaded [ 1.615979] at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 1.624314] as3722 4-0040: AS3722 with revision 0x1 found [ 1.631604] iommu: Adding device as3722-pinctrl to group 64 [ 1.638776] iommu: Adding device as3722-regulator to group 65 [ 1.647385] as3722-sd2: supplied by +5V_SYS [ 1.651959] as3722-sd3: supplied by +5V_SYS [ 1.656397] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.662729] as3722-sd4: supplied by +5V_SYS [ 1.667307] as3722-sd5: supplied by +5V_SYS [ 1.673252] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.679274] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.685466] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.691334] as3722-ldo3: supplied by +3.3V_SYS [ 1.695831] +1.05V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.703586] as3722-ldo4: supplied by +3.3V_SYS [ 1.708240] +2.8V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.714434] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.719271] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.726177] +VDDIO_SDMMC3: bypassed regulator has no supply! [ 1.731828] +VDDIO_SDMMC3: failed to get the current voltage(-517) [ 1.738025] as3722-regulator as3722-regulator: regulator 13 register failed -517 [ 1.748585] iommu: Adding device as3722-rtc to group 66 [ 1.754160] iommu: Adding device as3722-adc to group 67 [ 1.759678] iommu: Adding device as3722-power-off to group 68 [ 1.765739] iommu: Adding device as3722-wdt to group 69 [ 1.772809] tegra-ahci 70027000.sata: couldn't get PHY in node sata: -517 [ 1.795173] m25p80 spi1.0: w25q32dw (4096 Kbytes) [ 1.802083] iommu: Adding device Fixed MDIO bus.0 to group 70 [ 1.808280] libphy: Fixed MDIO Bus: probed [ 1.813291] CAN device driver interface [ 1.818065] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.825145] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.830970] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.836940] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.843907] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.853354] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.860777] usbcore: registered new interface driver pegasus [ 1.866488] usbcore: registered new interface driver asix [ 1.871907] usbcore: registered new interface driver ax88179_178a [ 1.878033] usbcore: registered new interface driver cdc_ether [ 1.883915] usbcore: registered new interface driver smsc75xx [ 1.889691] usbcore: registered new interface driver smsc95xx [ 1.895470] usbcore: registered new interface driver net1080 [ 1.901151] usbcore: registered new interface driver cdc_subset [ 1.907108] usbcore: registered new interface driver zaurus [ 1.912728] usbcore: registered new interface driver cdc_ncm [ 1.918609] tegra-phy 7d000000.usb-phy: no vbus regulator [ 1.924221] tegra-phy 7d004000.usb-phy: no vbus regulator [ 1.931631] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.938167] ehci-pci: EHCI PCI platform driver [ 1.942653] ehci-platform: EHCI generic platform driver [ 1.948083] ehci-orion: EHCI orion driver [ 1.952275] SPEAr-ehci: EHCI SPEAr driver [ 1.956421] ehci-st: EHCI STMicroelectronics driver [ 1.961432] ehci-exynos: EHCI EXYNOS driver [ 1.965792] ehci-atmel: EHCI Atmel driver [ 1.969934] tegra-ehci: Tegra EHCI driver [ 1.976801] tegra-ehci 7d004000.usb: EHCI Host Controller [ 1.982218] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 1.990003] tegra-ehci 7d004000.usb: irq 355, io mem 0x7d004000 [ 2.022309] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10 [ 2.028896] hub 1-0:1.0: USB hub found [ 2.032701] hub 1-0:1.0: 1 port detected [ 2.037179] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.043401] ohci-pci: OHCI PCI platform driver [ 2.047881] ohci-platform: OHCI generic platform driver [ 2.053317] SPEAr-ohci: OHCI SPEAr driver [ 2.057466] ohci-st: OHCI STMicroelectronics driver [ 2.062497] ohci-atmel: OHCI Atmel driver [ 2.067281] usbcore: registered new interface driver usb-storage [ 2.074860] iommu: Adding device ci_hdrc.0 to group 71 [ 2.087078] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 2.093969] as3722-rtc as3722-rtc: RTC interrupt 378 [ 2.102379] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 2.109548] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 2.116303] i2c /dev entries driver [ 2.123723] IR NEC protocol handler initialized [ 2.128250] IR RC5(x/sz) protocol handler initialized [ 2.133311] IR RC6 protocol handler initialized [ 2.137834] IR JVC protocol handler initialized [ 2.142377] IR Sony protocol handler initialized [ 2.146987] IR SANYO protocol handler initialized [ 2.151683] IR Sharp protocol handler initialized [ 2.156396] IR MCE Keyboard/mouse protocol handler initialized [ 2.162219] IR XMP protocol handler initialized [ 2.169955] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 2.185142] iommu: Adding device cpufreq-tegra124 to group 72 [ 2.193348] sdhci: Secure Digital Host Controller Interface driver [ 2.199519] sdhci: Copyright(c) Pierre Ossman [ 2.205585] Synopsys Designware Multimedia Card Interface Driver [ 2.212978] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.219438] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.224350] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.245594] mmc0: Unknown controller version (3). You may experience problems. [ 2.252873] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.322290] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 2.331843] ledtrig-cpu: registered to indicate activity on CPUs [ 2.338154] usbcore: registered new interface driver usbhid [ 2.343738] usbhid: USB HID core driver [ 2.351513] NET: Registered protocol family 10 [ 2.356792] Segment Routing with IPv6 [ 2.360512] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.366953] NET: Registered protocol family 17 [ 2.371399] can: controller area network core (rev 20170425 abi 9) [ 2.377644] NET: Registered protocol family 29 [ 2.382082] can: raw protocol (rev 20170425) [ 2.386363] can: broadcast manager protocol (rev 20170425 t) [ 2.392020] can: netlink gateway (rev 20170425) max_hops=1 [ 2.397792] Key type dns_resolver registered [ 2.402581] ThumbEE CPU extension supported. [ 2.406851] Registering SWP/SWPB emulation handler [ 2.426348] +3.3V_RUN: supplied by +3.3V_SYS [ 2.431938] +USB0_VBUS_SW: supplied by +5V_SYS [ 2.436665] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 2.442735] +5V_USB_HS: supplied by +5V_SYS [ 2.448659] +3.3V_LP0: supplied by +3.3V_SYS [ 2.455123] +5V_HDMI_CON: supplied by +5V_SYS [ 2.460164] +5V_SATA: supplied by +5V_SYS [ 2.464895] +12V_SATA: supplied by +VDD_MUX [ 2.470954] usb2-0: usb2-0 supply vbus not found, using dummy regulator [ 2.472751] mmc0: new high speed MMC card at address 0001 [ 2.473536] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 2.473821] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 2.473975] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 2.474570] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 2.479852] mmcblk0: p1 [ 2.508026] usb2-1: usb2-1 supply vbus not found, using dummy regulator [ 2.515070] usb3-0: usb3-0 supply vbus not found, using dummy regulator [ 2.523056] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.528692] tegra-pcie 1003000.pcie: Failed to get supply 'avddio-pex': -517 [ 2.538365] tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator [ 2.548946] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.559999] as3722-sd2: supplied by +5V_SYS [ 2.564567] as3722-sd3: supplied by +5V_SYS [ 2.568963] as3722-sd4: supplied by +5V_SYS [ 2.573494] as3722-sd5: supplied by +5V_SYS [ 2.579351] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 2.585191] as3722-ldo1: supplied by +3.3V_RUN [ 2.589959] as3722-ldo2: supplied by +1.8V_VDDIO [ 2.595671] as3722-ldo3: supplied by +3.3V_SYS [ 2.600959] as3722-ldo4: supplied by +3.3V_SYS [ 2.605755] as3722-ldo5: supplied by +1.8V_VDDIO [ 2.610614] as3722-ldo6: supplied by +3.3V_RUN [ 2.615306] as3722-ldo7: supplied by +1.8V_VDDIO [ 2.620644] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 2.627820] as3722-ldo9: supplied by +5V_SYS [ 2.633420] +3.3V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 2.639967] as3722-ldo10: supplied by +5V_SYS [ 2.644937] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 2.651733] as3722-ldo11: supplied by +3.3V_RUN [ 2.657074] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 2.667149] tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode [ 2.676224] tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst [ 2.686673] scsi host0: tegra-ahci [ 2.691188] scsi host1: tegra-ahci [ 2.694860] ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 345 [ 2.702873] ata2: DUMMY [ 2.708843] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.714294] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.722026] tegra-ehci 7d008000.usb: irq 356, io mem 0x7d008000 [ 2.752385] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.759334] hub 2-0:1.0: USB hub found [ 2.763190] hub 2-0:1.0: 1 port detected [ 2.769684] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 2.774638] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 2.786492] mmc1: Unknown controller version (3). You may experience problems. [ 2.793843] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.862819] mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 2.870974] tegra-pcie 1003000.pcie: 2x1, 1x1 configuration [ 2.879837] tegra-pcie 1003000.pcie: probing port 0, using 2 lanes [ 2.888244] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000008 [ 2.912419] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes [ 2.920760] tegra-pcie 1003000.pcie: Slot present pin change, signature: 00000000 [ 2.934534] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00 [ 2.940812] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.947038] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff] [ 2.953948] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref] [ 2.961263] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.966828] pci 0000:00:01.0: [10de:0e12] type 01 class 0x060400 [ 2.972898] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.982592] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4 may corrupt adjacent RW1C bits [ 2.992324] pci 0000:00:01.0: enabling Extended Tags [ 2.997304] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.007100] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.016908] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.023567] pci_bus 0000:00: 2-byte config write to 0000:00:01.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.033612] pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400 [ 3.036039] ata1: SATA link down (SStatus 0 SControl 300) [ 3.045067] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.054729] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.064446] pci 0000:00:02.0: enabling Extended Tags [ 3.069414] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x88 may corrupt adjacent RW1C bits [ 3.079182] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x52 may corrupt adjacent RW1C bits [ 3.088963] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.095589] pci_bus 0000:00: 2-byte config write to 0000:00:02.0 offset 0x4c may corrupt adjacent RW1C bits [ 3.105613] PCI: bus0: Fast back to back transfers disabled [ 3.111190] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.119235] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.127442] pci 0000:01:00.0: [8086:4232] type 00 class 0x028000 [ 3.133528] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 3.140503] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 3.161690] mmc1: new high speed SDHC card at address aaaa [ 3.167915] mmcblk1: mmc1:aaaa SD04G 3.69 GiB [ 3.172703] PCI: bus1: Fast back to back transfers disabled [ 3.178301] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.185152] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 3.191199] pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.196829] pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 3.203646] pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.210997] pci 0000:02:00.0: supports D1 D2 [ 3.215281] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.235434] mmcblk1: p1 p2 p3 [ 3.242381] PCI: bus2: Fast back to back transfers disabled [ 3.247969] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.254668] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x130fffff] [ 3.261452] pci 0000:00:02.0: BAR 8: assigned [mem 0x13100000-0x131fffff] [ 3.268280] pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref] [ 3.276037] pci 0000:00:02.0: BAR 7: assigned [io 0x1000-0x1fff] [ 3.282130] pci 0000:01:00.0: BAR 0: assigned [mem 0x13000000-0x13001fff 64bit] [ 3.289498] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.294484] pci 0000:00:01.0: bridge window [mem 0x13000000-0x130fffff] [ 3.301282] pci 0000:02:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref] [ 3.309081] pci 0000:02:00.0: BAR 2: assigned [mem 0x13100000-0x13100fff 64bit] [ 3.316422] pci 0000:02:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.322534] pci 0000:00:02.0: PCI bridge to [bus 02] [ 3.327501] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 3.333630] pci 0000:00:02.0: bridge window [mem 0x13100000-0x131fffff] [ 3.340412] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit pref] [ 3.348216] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.355333] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 3.361672] pcieport 0000:00:01.0: Signaling PME with IRQ 394 [ 3.367617] pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.374718] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 3.381037] pcieport 0000:00:02.0: Signaling PME with IRQ 395 [ 3.387216] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.392835] r8169 0000:02:00.0: enabling device (0140 -> 0143) [ 3.423892] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf0b81000, 00:04:4b:3a:d9:81, XID 0c000800 IRQ 396 [ 3.433582] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.445995] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 3.454373] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.460988] [drm] No driver support for vblank timestamp query. [ 3.592181] tegra-hdmi 54280000.hdmi: cannot set audio to 48000 Hz at 297000000 Hz pixel clock [ 3.838830] Console: switching to colour frame buffer device 512x135 [ 3.937431] drm drm: fb0: frame buffer device [ 3.941959] [drm] Initialized tegra 0.0.0 20120330 for drm on minor 0 [ 3.949601] iommu: Adding device cpufreq-dt.0 to group 73 [ 3.955381] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz [ 3.962711] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz [ 3.971775] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.979069] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:09 UTC (946684929) [ 3.988014] +USB0_VBUS_SW: disabling [ 3.991589] +1.8V_RUN_CAM: disabling [ 3.995400] +2.8V_RUN_CAM: disabling [ 3.999168] +1.2V_RUN_CAM_FRONT: disabling [ 4.003519] +1.05V_RUN_CAM_REAR: disabling [ 4.007767] +3.3V_RUN_TOUCH: disabling [ 4.011665] +2.8V_RUN_CAM_AF: disabling [ 4.015722] +1.8V_RUN_VPP_FUSE: disabling [ 4.020798] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 4.067886] EXT4-fs (mmcblk0p1): recovery complete [ 4.073665] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.081767] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 4.092078] devtmpfs: mounted [ 4.095706] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/#