U-Boot 2015.04-00466-gedec83e90172 (Mar 14 2016 - 10:42:01) TEGRA124 Model: Acer Chromebook 13 CB5-311 DRAM: 4 GiB C: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2 MMC init failed Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra124 (Nyan-big) # Tegra124 (Nyan-big) # usb start starting USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found USB1: USB EHCI 1.10 scanning bus 1 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra124 (Nyan-big) # mw 0x7000e4a0 0x00080000 Tegra124 (Nyan-big) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash' Tegra124 (Nyan-big) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra124 (Nyan-big) # tftpboot 0x82000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'zImage.multi_v7_defconfig'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################### 3.5 MiB/s done Bytes transferred = 7413856 (712060 hex) Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.102 Filename 'tegra124-nyan-big.dtb'. Load address: 0x83000000 Loading: *##### 3.2 MiB/s done Bytes transferred = 67943 (10967 hex) Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x712060 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 83000000, end 83013966 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.10.0-rc8-143185-g7089db8 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Feb 14 15:04:25 PST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: Acer Chromebook 13 CB5-311 [ 0.000000] OF: fdt:Ignoring memory range 0x100000000 - 0x17ffff000 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0xfb800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524287 [ 0.000000] free_area_init_node: node 0, pgdat c142b540, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327679 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 14 pages/cpu @eef8d000 s26176 r8192 d22976 u57344 [ 0.000000] pcpu-alloc: s26176 r8192 d22976 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522751 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=PARTUUID=4d36e82a-b3c0-4b4b-bfcd-afe5217ac023 rootwait gpt debug noinitrd earlyprintk init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1995772K/2097148K available (9216K kernel code, 1204K rwdata, 4148K rodata, 2048K init, 536K bss, 35840K reserved, 65536K cma-reserved, 1245180K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0c00000 (10208 kB) [ 0.000000] .init : 0xc1100000 - 0xc1300000 (2048 kB) [ 0.000000] .data : 0xc1300000 - 0xc142d040 (1205 kB) [ 0.000000] .bss : 0xc142f000 - 0xc14b51d0 ( 537 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] /interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000 [ 0.000000] Tegra clk 127: register failed with -17 [ 0.000003] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000010] clocksource: timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000016] Switching to timer-based delay loop, resolution 1000ns [ 0.001738] arm_arch_timer: Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.001744] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 0.001751] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns [ 0.001755] Switching to timer-based delay loop, resolution 83ns [ 0.001954] Console: colour dummy device 80x30 [ 0.001968] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 0.001974] pid_max: default: 32768 minimum: 301 [ 0.002015] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002019] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002258] CPU: Testing write buffer coherency: ok [ 0.002381] /cpus/cpu@0 missing clock-frequency property [ 0.002395] /cpus/cpu@1 missing clock-frequency property [ 0.002409] /cpus/cpu@2 missing clock-frequency property [ 0.002424] /cpus/cpu@3 missing clock-frequency property [ 0.002428] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002525] Setting up static identity map for 0x80300000 - 0x80300098 [ 0.003791] Tegra Revision: A01 SKU: 131 CPU Process: 1 SoC Process: 1 [ 0.004014] EFI services will not be available. [ 0.004107] smp: Bringing up secondary CPUs ... [ 0.004405] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.011914] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.021913] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.031634] smp: Brought up 1 node, 4 CPUs [ 0.031642] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 0.031644] CPU: All CPU(s) started in SVC mode. [ 0.032191] devtmpfs: initialized [ 0.039204] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.039402] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.039933] pinctrl core: initialized pinctrl subsystem [ 0.040658] NET: Registered protocol family 16 [ 0.041319] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.071661] cpuidle: using governor menu [ 0.081818] No ATAGs? [ 0.081876] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.081881] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.084477] Serial: AMBA PL011 UART driver [ 0.084822] tegra-mc 70019000.memory-controller: no memory timings for RAM code 0 registered [ 0.113522] +5V_SYS: supplied by +VDD_MUX [ 0.113624] +3.3V_SYS: supplied by +VDD_MUX [ 0.113844] +VDD_LED: Failed to request enable GPIO122: -517 [ 0.113849] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.113879] +5V_VDD_TS_SW: Failed to request enable GPIO81: -517 [ 0.113883] reg-fixed-voltage regulators:regulator@6: Failed to register regulator: -517 [ 0.113912] +5V_USB_HS: Failed to request enable GPIO108: -517 [ 0.113916] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.113944] +5V_USB_SS: Failed to request enable GPIO109: -517 [ 0.113948] reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517 [ 0.114026] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517 [ 0.114030] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 0.114058] +5V_HDMI_CON: Failed to request enable GPIO86: -517 [ 0.114062] reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517 [ 0.115169] vgaarb: loaded [ 0.115462] SCSI subsystem initialized [ 0.115531] libata version 3.00 loaded. [ 0.115623] usbcore: registered new interface driver usbfs [ 0.115645] usbcore: registered new interface driver hub [ 0.115669] usbcore: registered new device driver usb [ 0.117013] pps_core: LinuxPPS API ver. 1 registered [ 0.117016] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.117024] PTP clock support registered [ 0.117091] EDAC MC: Ver: 3.0.0 [ 0.117534] tegra-emc 7001b000.emc: no memory timings for RAM code 0 found in DT [ 0.117542] tegra-emc: probe of 7001b000.emc failed with error -2 [ 0.118026] clocksource: Switched to clocksource arch_sys_counter [ 0.121607] NET: Registered protocol family 2 [ 0.121817] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.121850] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.121911] TCP: Hash tables configured (established 8192 bind 8192) [ 0.121933] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.121948] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.122010] NET: Registered protocol family 1 [ 0.122142] RPC: Registered named UNIX socket transport module. [ 0.122145] RPC: Registered udp transport module. [ 0.122147] RPC: Registered tcp transport module. [ 0.122149] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.122154] PCI: CLS 0 bytes, default 64 [ 0.122591] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.123115] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.123393] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.127063] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.127350] NFS: Registering the id_resolver key type [ 0.127361] Key type id_resolver registered [ 0.127363] Key type id_legacy registered [ 0.127380] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.127983] bounce: pool size: 64 pages [ 0.128069] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.128073] io scheduler noop registered [ 0.128076] io scheduler deadline registered [ 0.128136] io scheduler cfq registered (default) [ 0.129872] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB ports: -517 [ 0.139869] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels [ 0.140575] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled. [ 0.161651] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.162836] console [ttyS0] disabled [ 0.162853] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 333, base_baud = 25500000) is a Tegra [ 1.036635] console [ttyS0] enabled [ 1.040431] SuperH (H)SCI(F) driver initialized [ 1.045296] msm_serial: driver initialized [ 1.049451] STMicroelectronics ASC driver initialized [ 1.055907] [drm] Initialized [ 1.060041] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.066572] tegra-dpaux 545c0000.dpaux: failed to get VDD supply: -517 [ 1.073860] panel supply power not found, using dummy regulator [ 1.083708] brd: module loaded [ 1.088982] loop: module loaded [ 1.093025] as3722 4-0040: AS3722 with revision 0x1 found [ 1.103090] as3722-sd2: supplied by +5V_SYS [ 1.107499] as3722-sd3: supplied by +5V_SYS [ 1.111833] +1.35V_LP0(sd3): Bringing 0uV into 1350000-1350000uV [ 1.118013] as3722-sd4: supplied by +5V_SYS [ 1.122391] +1.05V_RUN: Bringing 0uV into 1050000-1050000uV [ 1.128130] as3722-sd5: supplied by +5V_SYS [ 1.133708] as3722-ldo0: supplied by +1.35V_LP0(sd2) [ 1.139463] +1.8V_RUN_CAM: Bringing 0uV into 1800000-1800000uV [ 1.145476] as3722-ldo2: supplied by +1.8V_VDDIO [ 1.151096] as3722-ldo3: supplied by +3.3V_SYS [ 1.155545] +1.00V_LP0_VDD_RTC: Bringing 1100000uV into 1000000-1000000uV [ 1.163122] as3722-ldo4: supplied by +3.3V_SYS [ 1.167712] +3.3V_RUN_CAM: Bringing 0uV into 2800000-2800000uV [ 1.173733] as3722-ldo5: supplied by +1.8V_VDDIO [ 1.178503] +1.2V_RUN_CAM_FRONT: Bringing 0uV into 1200000-1200000uV [ 1.185186] +VDDIO_SDMMC3: Bringing 0uV into 1800000-1800000uV [ 1.191229] as3722-ldo7: supplied by +1.8V_VDDIO [ 1.195991] +1.05V_RUN_CAM_REAR: Bringing 0uV into 1050000-1050000uV [ 1.202548] as3722-ldo9: supplied by +5V_SYS [ 1.207110] +2.8V_RUN_TOUCH: Bringing 0uV into 2800000-2800000uV [ 1.213321] as3722-ldo10: supplied by +5V_SYS [ 1.217825] +2.8V_RUN_CAM_AF: Bringing 0uV into 2800000-2800000uV [ 1.224274] +1.8V_RUN_VPP_FUSE: Bringing 0uV into 1800000-1800000uV [ 1.236828] random: fast init done [ 1.242715] m25p80 spi32765.0: w25q32dw (4096 Kbytes) [ 1.248893] libphy: Fixed MDIO Bus: probed [ 1.253387] CAN device driver interface [ 1.257539] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.263679] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.269501] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.275426] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.282373] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.289210] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.296609] usbcore: registered new interface driver pegasus [ 1.302278] usbcore: registered new interface driver asix [ 1.307675] usbcore: registered new interface driver ax88179_178a [ 1.313774] usbcore: registered new interface driver cdc_ether [ 1.319616] usbcore: registered new interface driver smsc75xx [ 1.325365] usbcore: registered new interface driver smsc95xx [ 1.331114] usbcore: registered new interface driver net1080 [ 1.336770] usbcore: registered new interface driver cdc_subset [ 1.342691] usbcore: registered new interface driver zaurus [ 1.348275] usbcore: registered new interface driver cdc_ncm [ 1.354586] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.361102] ehci-pci: EHCI PCI platform driver [ 1.365550] ehci-platform: EHCI generic platform driver [ 1.370840] ehci-orion: EHCI orion driver [ 1.374884] SPEAr-ehci: EHCI SPEAr driver [ 1.378937] ehci-st: EHCI STMicroelectronics driver [ 1.383849] ehci-exynos: EHCI EXYNOS driver [ 1.388081] ehci-atmel: EHCI Atmel driver [ 1.392127] tegra-ehci: Tegra EHCI driver [ 1.396187] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.402359] ohci-pci: OHCI PCI platform driver [ 1.406803] ohci-platform: OHCI generic platform driver [ 1.412076] ohci-omap3: OHCI OMAP3 driver [ 1.416121] SPEAr-ohci: OHCI SPEAr driver [ 1.420174] ohci-st: OHCI STMicroelectronics driver [ 1.425088] ohci-atmel: OHCI Atmel driver [ 1.429355] usbcore: registered new interface driver usb-storage [ 1.435917] mousedev: PS/2 mouse device common for all mice [ 1.442120] 1-0015 supply vcc not found, using dummy regulator [ 1.449320] as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0 [ 1.456178] as3722-rtc as3722-rtc: RTC interrupt 372 [ 1.463100] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.470239] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.476595] i2c /dev entries driver [ 1.482541] 0-004c supply vcc not found, using dummy regulator [ 1.492630] sdhci: Secure Digital Host Controller Interface driver [ 1.498808] sdhci: Copyright(c) Pierre Ossman [ 1.503715] Synopsys Designware Multimedia Card Interface Driver [ 1.510115] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.516036] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.521800] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.526669] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.531658] mmc0: Unknown controller version (3). You may experience problems. [ 1.538894] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.608034] mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA [ 1.616136] ledtrig-cpu: registered to indicate activity on CPUs [ 1.622273] usbcore: registered new interface driver usbhid [ 1.627829] usbhid: USB HID core driver [ 1.633046] NET: Registered protocol family 10 [ 1.637886] Segment Routing with IPv6 [ 1.641585] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.647739] NET: Registered protocol family 17 [ 1.652184] can: controller area network core (rev 20120528 abi 9) [ 1.658439] NET: Registered protocol family 29 [ 1.662874] can: raw protocol (rev 20120528) [ 1.667137] can: broadcast manager protocol (rev 20161123 t) [ 1.672793] can: netlink gateway (rev 20130117) max_hops=1 [ 1.678419] Key type dns_resolver registered [ 1.682693] elan_i2c 1-0015: Elan Touchpad: Module ID: 0x002a, Firmware: 0x0005, Sample: 0x0007, IAP: 0x0009 [ 1.692687] ThumbEE CPU extension supported. [ 1.692704] input: Elan Touchpad as /devices/soc0/7000c400.i2c/i2c-1/1-0015/input/input0 [ 1.705023] Registering SWP/SWPB emulation handler [ 1.714811] +3.3V_RUN: supplied by +3.3V_SYS [ 1.720552] +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN [ 1.726143] +1.8V_RUN_CAM: supplied by +3.3V_RUN [ 1.730878] +VDDIO_SDMMC3: supplied by +3.3V_RUN [ 1.735514] +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN [ 1.740772] +VDD_LED: supplied by +VDD_MUX [ 1.745055] +5V_VDD_TS_SW: supplied by +5V_SYS [ 1.749916] +5V_USB_HS: supplied by +5V_SYS [ 1.754440] +5V_USB_SS: supplied by +5V_SYS [ 1.759727] +3.3V_PANEL: supplied by +3.3V_RUN [ 1.765188] +3.3V_LP0: supplied by +3.3V_SYS [ 1.769724] mmc0: new high speed MMC card at address 0001 [ 1.775752] mmcblk0: mmc0:0001 MMC16G 14.4 GiB [ 1.775767] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 1.776041] elan_i2c 1-0015: failed to read report data: -121 [ 1.776394] +5V_HDMI_CON: supplied by +5V_SYS [ 1.777512] usb3-0 supply vbus not found, using dummy regulator [ 1.777581] usb3-1 supply vbus not found, using dummy regulator [ 1.780442] elan_i2c 1-0015: failed to read report data: -121 [ 1.782359] tegra-sor 54540000.sor: failed to probe output: -517 [ 1.783104] panel supply power not found, using dummy regulator [ 1.784063] sdhci-tegra 700b0000.sdhci: allocated mmc-pwrseq [ 1.784164] mmc1: Unknown controller version (3). You may experience problems. [ 1.784210] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.784578] mmc1: Switching to 3.3V signalling voltage failed [ 1.848136] mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA [ 1.849170] sdhci-tegra 700b0400.sdhci: Got CD GPIO [ 1.849180] sdhci-tegra 700b0400.sdhci: Got WP GPIO [ 1.849315] mmc2: Unknown controller version (3). You may experience problems. [ 1.849368] mmc2: Invalid maximum block size, assuming 512 bytes [ 1.881248] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB [ 1.887766] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB [ 1.894079] mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB [ 1.904331] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 1.918320] mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA [ 1.921027] elan_i2c 1-0015: invalid report id data (ff) [ 1.959765] mmc1: new high speed SDIO card at address 0001 [ 2.028112] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.034713] [drm] No driver support for vblank timestamp query. [ 2.080457] mmc2: new high speed SDHC card at address 0007 [ 2.080854] mmcblk2: mmc2:0007 SD08G 7.42 GiB [ 2.090591] GPT:Primary header alternate_lba != Alt. header my_lba [ 2.090596] GPT:3014591 != 15564799 [ 2.090597] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.090598] GPT:3014591 != 15564799 [ 2.090599] GPT: Use GNU Parted to correct GPT errors. [ 2.090624] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 [ 2.097165] Console: switching to colour frame buffer device 170x48 [ 2.148490] drm drm: fb0: frame buffer device [ 2.188131] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.194711] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.202307] as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824) [ 2.211458] +1.8V_RUN_CAM: disabling [ 2.215229] +3.3V_RUN_CAM: disabling [ 2.219081] +1.2V_RUN_CAM_FRONT: disabling [ 2.223379] +1.05V_RUN_CAM_REAR: disabling [ 2.227629] +2.8V_RUN_TOUCH: disabling [ 2.231642] +2.8V_RUN_CAM_AF: disabling [ 2.235633] +1.8V_RUN_VPP_FUSE: disabling [ 2.239880] +5V_VDD_TS_SW: disabling [ 2.243452] +5V_USB_HS: disabling [ 2.246755] +5V_USB_SS: disabling [ 2.250995] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.259676] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.426843] EXT4-fs (mmcblk0p3): recovery complete [ 2.432362] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.440489] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.447160] devtmpfs: mounted [ 2.450846] Freeing unused kernel memory: 2048K bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# mount -t sysfs none /sys root@(none):/# root@(none):/# mount -t debugfs none /sys/kernel/debug root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:29 1970 [ 5.877395] PM: Syncing filesystems ... done. [ 5.887011] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5.895018] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5.903667] Suspending console(s) (use no_console_suspend to debug) [ 5.951687] PM: suspend of devices complete after 41.189 msecs [ 5.953110] PM: late suspend of devices complete after 1.413 msecs [ 5.954090] PM: noirq suspend of devices complete after 0.975 msecs [ 5.954092] Disabling non-boot CPUs ... [ 5.954463] CPU1: shutdown [ 6.039083] IRQ17 no longer affine to CPU2 [ 6.039297] CPU2: shutdown [ 6.079234] CPU3: shutdown [ 6.128514] Entering suspend state LP1 [ 6.128514] Suspended for 3.011 seconds [ 6.128525] Enabling non-boot CPUs ... [ 6.158732] CPU1 is up [ 6.198729] CPU2 is up [ 6.238824] CPU3 is up [ 6.239320] PM: noirq resume of devices complete after 0.491 msecs [ 6.240592] PM: early resume of devices complete after 0.972 msecs [ 6.397171] mmc1: Switching to 3.3V signalling voltage failed [ 6.648059] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 6.668154] PM: resume of devices complete after 427.556 msecs [ 6.751612] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:34 1970 [ 7.947853] PM: Syncing filesystems ... done. [ 7.957385] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 7.965527] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 7.974203] Suspending console(s) (use no_console_suspend to debug) [ 8.031092] PM: suspend of devices complete after 50.019 msecs [ 8.032490] PM: late suspend of devices complete after 1.389 msecs [ 8.033438] PM: noirq suspend of devices complete after 0.944 msecs [ 8.033440] Disabling non-boot CPUs ... [ 8.033800] CPU1: shutdown [ 8.089147] CPU2: shutdown [ 8.148973] CPU3: shutdown [ 8.178536] Entering suspend state LP1 [ 8.178536] Suspended for 2.949 seconds [ 8.178546] Enabling non-boot CPUs ... [ 8.208707] CPU1 is up [ 8.248708] CPU2 is up [ 8.288795] CPU3 is up [ 8.289271] PM: noirq resume of devices complete after 0.471 msecs [ 8.290489] PM: early resume of devices complete after 0.920 msecs [ 8.447276] mmc1: Switching to 3.3V signalling voltage failed [ 8.698058] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 8.718283] PM: resume of devices complete after 427.789 msecs [ 8.797657] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:39 1970 [ 9.997806] PM: Syncing filesystems ... done. [ 10.007325] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 10.015402] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 10.024075] Suspending console(s) (use no_console_suspend to debug) [ 10.081116] PM: suspend of devices complete after 50.149 msecs [ 10.082460] PM: late suspend of devices complete after 1.335 msecs [ 10.083403] PM: noirq suspend of devices complete after 0.938 msecs [ 10.083405] Disabling non-boot CPUs ... [ 10.083764] CPU1: shutdown [ 10.149079] CPU2: shutdown [ 10.209002] CPU3: shutdown [ 10.258473] Entering suspend state LP1 [ 10.258473] Suspended for 2.919 seconds [ 10.258483] Enabling non-boot CPUs ... [ 10.288680] CPU1 is up [ 10.328675] CPU2 is up [ 10.368767] CPU3 is up [ 10.369239] PM: noirq resume of devices complete after 0.467 msecs [ 10.370448] PM: early resume of devices complete after 0.913 msecs [ 10.528010] mmc1: Switching to 3.3V signalling voltage failed [ 10.788065] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 10.799117] PM: resume of devices complete after 428.660 msecs [ 10.878594] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:44 1970 [ 12.077285] PM: Syncing filesystems ... done. [ 12.086782] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 12.094953] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 12.103457] Suspending console(s) (use no_console_suspend to debug) [ 12.145114] PM: suspend of devices complete after 34.851 msecs [ 12.146368] PM: late suspend of devices complete after 1.245 msecs [ 12.147320] PM: noirq suspend of devices complete after 0.947 msecs [ 12.147321] Disabling non-boot CPUs ... [ 12.147681] CPU1: shutdown [ 12.209074] CPU2: shutdown [ 12.268973] CPU3: shutdown [ 12.318426] Entering suspend state LP1 [ 12.318426] Suspended for 2.939 seconds [ 12.318436] Enabling non-boot CPUs ... [ 12.348643] CPU1 is up [ 12.388639] CPU2 is up [ 12.428739] CPU3 is up [ 12.429210] PM: noirq resume of devices complete after 0.467 msecs [ 12.430632] PM: early resume of devices complete after 1.115 msecs [ 12.587994] mmc1: Switching to 3.3V signalling voltage failed [ 12.847988] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 12.859192] PM: resume of devices complete after 428.554 msecs [ 12.938568] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:49 1970 [ 14.137769] PM: Syncing filesystems ... done. [ 14.147295] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 14.155453] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 14.164121] Suspending console(s) (use no_console_suspend to debug) [ 14.205730] PM: suspend of devices complete after 34.805 msecs [ 14.206982] PM: late suspend of devices complete after 1.244 msecs [ 14.207847] PM: noirq suspend of devices complete after 0.861 msecs [ 14.207849] Disabling non-boot CPUs ... [ 14.208073] IRQ17 no longer affine to CPU1 [ 14.208240] CPU1: shutdown [ 14.279027] CPU2: shutdown [ 14.338868] CPU3: shutdown [ 14.398442] Entering suspend state LP1 [ 14.398442] Suspended for 2.919 seconds [ 14.398452] Enabling non-boot CPUs ... [ 14.428641] CPU1 is up [ 14.468621] CPU2 is up [ 14.508710] CPU3 is up [ 14.509178] PM: noirq resume of devices complete after 0.463 msecs [ 14.510349] PM: early resume of devices complete after 0.872 msecs [ 14.667184] mmc1: Switching to 3.3V signalling voltage failed [ 14.917947] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 14.938212] PM: resume of devices complete after 427.858 msecs [ 15.021659] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:54 1970 [ 16.217728] PM: Syncing filesystems ... done. [ 16.227262] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 16.235421] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 16.244089] Suspending console(s) (use no_console_suspend to debug) [ 16.301028] PM: suspend of devices complete after 50.097 msecs [ 16.302428] PM: late suspend of devices complete after 1.391 msecs [ 16.303373] PM: noirq suspend of devices complete after 0.940 msecs [ 16.303375] Disabling non-boot CPUs ... [ 16.303738] CPU1: shutdown [ 16.368982] CPU2: shutdown [ 16.428907] CPU3: shutdown [ 16.478383] Entering suspend state LP1 [ 16.478383] Suspended for 2.919 seconds [ 16.478392] Enabling non-boot CPUs ... [ 16.508594] CPU1 is up [ 16.548594] CPU2 is up [ 16.588692] CPU3 is up [ 16.589163] PM: noirq resume of devices complete after 0.467 msecs [ 16.590576] PM: early resume of devices complete after 1.098 msecs [ 16.747113] mmc1: Switching to 3.3V signalling voltage failed [ 16.997897] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 17.018078] PM: resume of devices complete after 427.496 msecs [ 17.097442] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:00:59 1970 [ 18.297717] PM: Syncing filesystems ... done. [ 18.307225] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 18.315304] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 18.323975] Suspending console(s) (use no_console_suspend to debug) [ 18.381043] PM: suspend of devices complete after 50.196 msecs [ 18.382414] PM: late suspend of devices complete after 1.362 msecs [ 18.383354] PM: noirq suspend of devices complete after 0.936 msecs [ 18.383356] Disabling non-boot CPUs ... [ 18.383730] CPU1: shutdown [ 18.438977] CPU2: shutdown [ 18.498794] CPU3: shutdown [ 18.528386] Entering suspend state LP1 [ 18.528386] Suspended for 2.949 seconds [ 18.528396] Enabling non-boot CPUs ... [ 18.558576] CPU1 is up [ 18.598561] CPU2 is up [ 18.638661] CPU3 is up [ 18.639129] PM: noirq resume of devices complete after 0.463 msecs [ 18.640307] PM: early resume of devices complete after 0.859 msecs [ 18.798096] mmc1: Switching to 3.3V signalling voltage failed [ 19.057926] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 19.069189] PM: resume of devices complete after 428.873 msecs [ 19.148708] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:04 1970 [ 20.347612] PM: Syncing filesystems ... done. [ 20.357110] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 20.365261] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 20.373870] Suspending console(s) (use no_console_suspend to debug) [ 20.415519] PM: suspend of devices complete after 34.841 msecs [ 20.416774] PM: late suspend of devices complete after 1.246 msecs [ 20.417724] PM: noirq suspend of devices complete after 0.946 msecs [ 20.417726] Disabling non-boot CPUs ... [ 20.418106] CPU1: shutdown [ 20.498949] CPU2: shutdown [ 20.568834] CPU3: shutdown [ 20.598363] Entering suspend state LP1 [ 20.598363] Suspended for 2.929 seconds [ 20.598373] Enabling non-boot CPUs ... [ 20.628549] CPU1 is up [ 20.668544] CPU2 is up [ 20.708633] CPU3 is up [ 20.709105] PM: noirq resume of devices complete after 0.468 msecs [ 20.710468] PM: early resume of devices complete after 1.066 msecs [ 20.867077] mmc1: Switching to 3.3V signalling voltage failed [ 21.117835] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 21.138216] PM: resume of devices complete after 427.739 msecs [ 21.217595] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:09 1970 [ 22.417671] PM: Syncing filesystems ... done. [ 22.427196] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 22.435356] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 22.444024] Suspending console(s) (use no_console_suspend to debug) [ 22.501219] PM: suspend of devices complete after 50.354 msecs [ 22.502588] PM: late suspend of devices complete after 1.360 msecs [ 22.503543] PM: noirq suspend of devices complete after 0.950 msecs [ 22.503545] Disabling non-boot CPUs ... [ 22.503908] CPU1: shutdown [ 22.558911] CPU2: shutdown [ 22.618807] CPU3: shutdown [ 22.668313] Entering suspend state LP1 [ 22.668313] Suspended for 2.929 seconds [ 22.668323] Enabling non-boot CPUs ... [ 22.698505] CPU1 is up [ 22.738503] CPU2 is up [ 22.778601] CPU3 is up [ 22.779067] PM: noirq resume of devices complete after 0.461 msecs [ 22.780601] PM: early resume of devices complete after 1.220 msecs [ 22.937034] mmc1: Switching to 3.3V signalling voltage failed [ 23.187876] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 23.208003] PM: resume of devices complete after 427.397 msecs [ 23.287376] Restarting tasks ... done. root@(none):/# root@(none):/# rtcwake -d rtc1 -m mem -s 3 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc1 at Thu Jan 1 00:01:14 1970 [ 24.487486] PM: Syncing filesystems ... done. [ 24.497010] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 24.505169] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 24.513840] Suspending console(s) (use no_console_suspend to debug) [ 24.571001] PM: suspend of devices complete after 50.321 msecs [ 24.572214] PM: late suspend of devices complete after 1.204 msecs [ 24.573168] PM: noirq suspend of devices complete after 0.949 msecs [ 24.573170] Disabling non-boot CPUs ... [ 24.573533] CPU1: shutdown [ 24.628883] CPU2: shutdown [ 24.688785] CPU3: shutdown [ 24.738263] Entering suspend state LP1 [ 24.738263] Suspended for 2.929 seconds [ 24.738273] Enabling non-boot CPUs ... [ 24.768485] CPU1 is up [ 24.808475] CPU2 is up [ 24.848581] CPU3 is up [ 24.849054] PM: noirq resume of devices complete after 0.468 msecs [ 24.850218] PM: early resume of devices complete after 0.856 msecs [ 25.006834] mmc1: Switching to 3.3V signalling voltage failed [ 25.257831] tegra-sor 54540000.sor: failed to attach SOR: -110 [ 25.278069] PM: resume of devices complete after 427.846 msecs [ 25.357434] Restarting tasks ... done. root@(none):/# root@(none):/# NVTB SYSTEM SUSPEND TEST COMPLETE