Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-01 15:14:55.759916863 -0800
+++ /tmp/foob	2017-01-01 15:14:55.763916877 -0800
@@ -39,20 +39,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################################
-	 3.3 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 7403096 (70f658 hex)
+Bytes transferred = 7403088 (70f650 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.8 MiB/s
+	 2.6 MiB/s
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x70f658 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x70f650 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -60,7 +60,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc1-141325-g7ce7d89 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Dec 25 16:40:13 PST 2016
+Linux version 4.10.0-rc2-141358-g0c744ea (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jan 1 15:05:44 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -306,12 +306,12 @@
 Registering SWP/SWPB emulation handler
 usb1_vbus: supplied by vdd-sys-5v0
 usb2_vbus: supplied by vdd-sys-5v0
+VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
 mmc0: new high speed SDHC card at address aaaa
 mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
-VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
- mmcblk0: p1 p2 p3
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
+ mmcblk0: p1 p2 p3
 mmc1: new high speed MMC card at address 0001
 mmcblk1: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
@@ -328,7 +328,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-19 12:12:36 UTC (971957556)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-26 10:38:20 UTC (972556700)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
@@ -340,4 +340,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.460253] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.475275] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-01 15:14:55.771916905 -0800
+++ /tmp/foob	2017-01-01 15:14:55.775916920 -0800
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
+Hit any key to stop autoboot:  2  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -37,9 +37,9 @@
 	 #################################################################
 	 #################################################################
 	 ##################################################
-	 3.1 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 5504520 (53fe08 hex)
+Bytes transferred = 5504528 (53fe10 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
@@ -50,7 +50,7 @@
 done
 Bytes transferred = 35044 (88e4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x53fe08 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x53fe10 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff8e3 ... OK
@@ -59,7 +59,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc1-141325-g7ce7d89 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Dec 25 16:40:02 PST 2016
+Linux version 4.10.0-rc2-141358-g0c744ea (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jan 1 15:05:35 PST 2017
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -322,7 +322,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-19 12:09:44 UTC (971957384)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-26 10:35:36 UTC (972556536)
 dvdd_ts: disabling
 usb1_vbus: disabling
 vdd_cam_1v8_reg: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-01 15:14:55.779916934 -0800
+++ /tmp/foob	2017-01-01 15:14:55.783916948 -0800
@@ -36,7 +36,7 @@
 	 ##################################################
 	 3.9 MiB/s
 done
-Bytes transferred = 7403096 (70f658 hex)
+Bytes transferred = 7403088 (70f650 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -47,7 +47,7 @@
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x70f658 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x70f650 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -55,7 +55,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc1-141325-g7ce7d89 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Dec 25 16:40:13 PST 2016
+Linux version 4.10.0-rc2-141358-g0c744ea (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jan 1 15:05:44 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -312,12 +312,12 @@
 +5V_HDMI_CON: supplied by +5V_SYS
 +5V_SATA: supplied by +5V_SYS
 +12V_SATA: supplied by +VDD_MUX
-mmc0: new high speed MMC card at address 0001
 usb2-0 supply vbus not found, using dummy regulator
 usb2-1 supply vbus not found, using dummy regulator
 usb3-0 supply vbus not found, using dummy regulator
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+mmc0: new high speed MMC card at address 0001
 tegra124-dfll 70110000.clock: couldn't get vdd_cpu regulator
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
 as3722-sd2: supplied by +5V_SYS
@@ -424,9 +424,9 @@
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 [drm] Cannot find any crtc or sizes - going 1024x768
-ata1: SATA link down (SStatus 0 SControl 300)
 mmc1: new high speed SDHC card at address aaaa
 mmcblk1: mmc1:aaaa SD04G 3.69 GiB 
+ata1: SATA link down (SStatus 0 SControl 300)
  mmcblk1: p1 p2 p3
 Console: switching to colour frame buffer device 128x48
 drm drm: fb0:  frame buffer device
@@ -440,7 +440,7 @@
 cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 696000 KHz
 cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 714000 KHz
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:00 UTC (946684920)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:02:09 UTC (946684929)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_CAM: disabling
 +2.8V_RUN_CAM: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-01 15:14:55.787916962 -0800
+++ /tmp/foob	2017-01-01 15:14:55.791916977 -0800
@@ -9,7 +9,7 @@
 Model: NVIDIA Jetson TK1
 Board: NVIDIA Jetson TK1
 DRAM:  2 GiB
-MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+MC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
 In:    serial
 Out:   serial
 Err:   serial
@@ -32,20 +32,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################################
-	 3.9 MiB/s
+	 4 MiB/s
 done
-Bytes transferred = 5504520 (53fe08 hex)
+Bytes transferred = 5504528 (53fe10 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x83000000 tegra124-jetson-tk1.dtb
 Using eth_rtl8169 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.8 MiB/s
+	 4 MiB/s
 done
 Bytes transferred = 67133 (1063d hex)
 Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x53fe08 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x53fe10 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 8301363c
@@ -54,7 +54,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc1-141325-g7ce7d89 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Dec 25 16:40:02 PST 2016
+Linux version 4.10.0-rc2-141358-g0c744ea (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jan 1 15:05:35 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -328,10 +328,10 @@
 as3722-sd4: supplied by +5V_SYS
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 as3722-sd5: supplied by +5V_SYS
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 as3722-ldo0: supplied by +1.35V_LP0(sd2)
 as3722-ldo1: supplied by +3.3V_RUN
 as3722-ldo2: supplied by +1.8V_VDDIO
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input1
 as3722-ldo3: supplied by +3.3V_SYS
 as3722-ldo4: supplied by +3.3V_SYS
 as3722-ldo5: supplied by +1.8V_VDDIO
Diff for ./tegra124-nyan-big/tegra124-nyan-big/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-01 15:14:55.807917033 -0800
+++ /tmp/foob	2017-01-01 15:14:55.807917033 -0800
@@ -5,7 +5,7 @@
 TEGRA124
 Model: Acer Chromebook 13 CB5-311
 DRAM:  4 GiB
-C:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
+:   Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
 MMC init failed
 Using default environment
 
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -44,18 +44,18 @@
 	 ##################################################
 	 3.5 MiB/s
 done
-Bytes transferred = 7403096 (70f658 hex)
+Bytes transferred = 7403088 (70f650 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.2 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 67943 (10967 hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x70f658 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x70f650 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013966
@@ -63,7 +63,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc1-141325-g7ce7d89 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Dec 25 16:40:13 PST 2016
+Linux version 4.10.0-rc2-141358-g0c744ea (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jan 1 15:05:44 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -322,6 +322,12 @@
 +5V_USB_HS: supplied by +5V_SYS
 +5V_USB_SS: supplied by +5V_SYS
 +3.3V_PANEL: supplied by +3.3V_RUN
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
+mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
+mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
+mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
 +3.3V_LP0: supplied by +3.3V_SYS
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 elan_i2c 1-0015: failed to read report data: -121
@@ -334,20 +340,14 @@
 mmc1: Unknown controller version (3). You may experience problems.
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: Switching to 3.3V signalling voltage failed
-mmc0: new high speed MMC card at address 0001
-mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
-mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
 mmc1: SDHCI controller on 700b0000.sdhci [700b0000.sdhci] using ADMA
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc2: Unknown controller version (3). You may experience problems.
-elan_i2c 1-0015: invalid report id data (ff)
 mmc2: Invalid maximum block size, assuming 512 bytes
-mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
-mmcblk0rpmb: mmc0:0001 MMC16G partition 3 128 KiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
-mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+elan_i2c 1-0015: invalid report id data (ff)
 mmc1: new high speed SDIO card at address 0001
+mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 mmc2: new high speed SDHC card at address 0007
@@ -362,7 +362,7 @@
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:24 UTC (946684824)
 +1.8V_RUN_CAM: disabling
 +3.3V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
Diff for ./tegra124-nyan-big/tegra124-nyan-big/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-01 15:14:55.811917048 -0800
+++ /tmp/foob	2017-01-01 15:14:55.815917062 -0800
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra124 (Nyan-big) # 
 Tegra124 (Nyan-big) # usb start
 starting USB...
@@ -40,20 +40,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################################
-	 3.4 MiB/s
+	 3.5 MiB/s
 done
-Bytes transferred = 5504520 (53fe08 hex)
+Bytes transferred = 5504528 (53fe10 hex)
 Tegra124 (Nyan-big) # tftpboot 0x83000000 tegra124-nyan-big.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-nyan-big.dtb'.
 Load address: 0x83000000
 Loading: *#####
-	 3.4 MiB/s
+	 3.6 MiB/s
 done
 Bytes transferred = 67943 (10967 hex)
 Tegra124 (Nyan-big) # bootz 0x82000000 - 0x83000000
-Kernel image @ 0x82000000 [ 0x000000 - 0x53fe08 ]
+Kernel image @ 0x82000000 [ 0x000000 - 0x53fe10 ]
 ## Flattened Device Tree blob at 83000000
    Booting using the fdt blob at 0x83000000
    Using Device Tree in place at 83000000, end 83013966
@@ -62,7 +62,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc1-141325-g7ce7d89 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Dec 25 16:40:02 PST 2016
+Linux version 4.10.0-rc2-141358-g0c744ea (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jan 1 15:05:35 PST 2017
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: div instructions available: patching division code
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
@@ -286,17 +286,17 @@
 tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
 BUG: scheduling while atomic: kworker/0:1/37/0x00000002
 Modules linked in:
-CPU: 0 PID: 37 Comm: kworker/0:1 Not tainted 4.10.0-rc1-141325-g7ce7d89 #1
+CPU: 0 PID: 37 Comm: kworker/0:1 Not tainted 4.10.0-rc2-141358-g0c744ea #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events_freezable mmc_rescan
 [<c010f308>] (unwind_backtrace) from [<c010a900>] (show_stack+0x10/0x14)
 [<c010a900>] (show_stack) from [<c034dabc>] (dump_stack+0x84/0xa4)
-[<c034dabc>] (dump_stack) from [<c01b4b40>] (__schedule_bug+0x60/0x80)
-[<c01b4b40>] (__schedule_bug) from [<c0828f40>] (__schedule+0x528/0x60c)
-[<c0828f40>] (__schedule) from [<c08291f4>] (schedule+0x50/0xc0)
-[<c08291f4>] (schedule) from [<c0829450>] (schedule_preempt_disabled+0x24/0x40)
-[<c0829450>] (schedule_preempt_disabled) from [<c082d3b8>] (__mutex_lock_slowpath+0x400/0x6f0)
-[<c082d3b8>] (__mutex_lock_slowpath) from [<c03c5764>] (clk_prepare_lock+0x3c/0xe4)
+[<c034dabc>] (dump_stack) from [<c01b4b6c>] (__schedule_bug+0x60/0x80)
+[<c01b4b6c>] (__schedule_bug) from [<c0828f10>] (__schedule+0x528/0x60c)
+[<c0828f10>] (__schedule) from [<c08291c4>] (schedule+0x50/0xc0)
+[<c08291c4>] (schedule) from [<c0829420>] (schedule_preempt_disabled+0x24/0x40)
+[<c0829420>] (schedule_preempt_disabled) from [<c082d388>] (__mutex_lock_slowpath+0x400/0x6f0)
+[<c082d388>] (__mutex_lock_slowpath) from [<c03c5764>] (clk_prepare_lock+0x3c/0xe4)
 [<c03c5764>] (clk_prepare_lock) from [<c03c7c6c>] (clk_set_rate+0x14/0x30)
 [<c03c7c6c>] (clk_set_rate) from [<c05de228>] (tegra_sdhci_set_clock+0x28/0xdc)
 [<c05de228>] (tegra_sdhci_set_clock) from [<c05dd394>] (sdhci_set_ios+0x2d8/0x584)
@@ -304,32 +304,32 @@
 [<c05c777c>] (mmc_set_bus_mode) from [<c05ca680>] (mmc_init_card+0xb4/0x1824)
 [<c05ca680>] (mmc_init_card) from [<c05cc164>] (mmc_attach_mmc+0x8c/0x14c)
 [<c05cc164>] (mmc_attach_mmc) from [<c05c86e8>] (mmc_rescan+0x274/0x34c)
-[<c05c86e8>] (mmc_rescan) from [<c0134bb4>] (process_one_work+0x120/0x31c)
-[<c0134bb4>] (process_one_work) from [<c0134e14>] (worker_thread+0x2c/0x4b4)
-[<c0134e14>] (worker_thread) from [<c013a320>] (kthread+0xfc/0x134)
-[<c013a320>] (kthread) from [<c0107938>] (ret_from_fork+0x14/0x3c)
+[<c05c86e8>] (mmc_rescan) from [<c0134be0>] (process_one_work+0x120/0x31c)
+[<c0134be0>] (process_one_work) from [<c0134e40>] (worker_thread+0x2c/0x4b4)
+[<c0134e40>] (worker_thread) from [<c013a34c>] (kthread+0xfc/0x134)
+[<c013a34c>] (kthread) from [<c0107938>] (ret_from_fork+0x14/0x3c)
 BUG: scheduling while atomic: kworker/0:1/37/0x00000000
 Modules linked in:
-CPU: 0 PID: 37 Comm: kworker/0:1 Tainted: G        W       4.10.0-rc1-141325-g7ce7d89 #1
+CPU: 0 PID: 37 Comm: kworker/0:1 Tainted: G        W       4.10.0-rc2-141358-g0c744ea #1
 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
 Workqueue: events_freezable mmc_rescan
 [<c010f308>] (unwind_backtrace) from [<c010a900>] (show_stack+0x10/0x14)
 [<c010a900>] (show_stack) from [<c034dabc>] (dump_stack+0x84/0xa4)
-[<c034dabc>] (dump_stack) from [<c01b4b40>] (__schedule_bug+0x60/0x80)
-[<c01b4b40>] (__schedule_bug) from [<c0828f40>] (__schedule+0x528/0x60c)
-[<c0828f40>] (__schedule) from [<c08291f4>] (schedule+0x50/0xc0)
-[<c08291f4>] (schedule) from [<c082ed8c>] (schedule_timeout+0x1c0/0x2e4)
-[<c082ed8c>] (schedule_timeout) from [<c0829b40>] (wait_for_common+0xbc/0x148)
-[<c0829b40>] (wait_for_common) from [<c05c62ac>] (mmc_wait_for_req_done+0x7c/0x104)
+[<c034dabc>] (dump_stack) from [<c01b4b6c>] (__schedule_bug+0x60/0x80)
+[<c01b4b6c>] (__schedule_bug) from [<c0828f10>] (__schedule+0x528/0x60c)
+[<c0828f10>] (__schedule) from [<c08291c4>] (schedule+0x50/0xc0)
+[<c08291c4>] (schedule) from [<c082ed5c>] (schedule_timeout+0x1c0/0x2e4)
+[<c082ed5c>] (schedule_timeout) from [<c0829b10>] (wait_for_common+0xbc/0x148)
+[<c0829b10>] (wait_for_common) from [<c05c62ac>] (mmc_wait_for_req_done+0x7c/0x104)
 [<c05c62ac>] (mmc_wait_for_req_done) from [<c05c6470>] (mmc_wait_for_cmd+0x58/0x78)
 [<c05c6470>] (mmc_wait_for_cmd) from [<c05ccb34>] (mmc_go_idle+0x78/0xec)
 [<c05ccb34>] (mmc_go_idle) from [<c05ca600>] (mmc_init_card+0x34/0x1824)
 [<c05ca600>] (mmc_init_card) from [<c05cc164>] (mmc_attach_mmc+0x8c/0x14c)
 [<c05cc164>] (mmc_attach_mmc) from [<c05c86e8>] (mmc_rescan+0x274/0x34c)
-[<c05c86e8>] (mmc_rescan) from [<c0134bb4>] (process_one_work+0x120/0x31c)
-[<c0134bb4>] (process_one_work) from [<c0134e14>] (worker_thread+0x2c/0x4b4)
-[<c0134e14>] (worker_thread) from [<c013a320>] (kthread+0xfc/0x134)
-[<c013a320>] (kthread) from [<c0107938>] (ret_from_fork+0x14/0x3c)
+[<c05c86e8>] (mmc_rescan) from [<c0134be0>] (process_one_work+0x120/0x31c)
+[<c0134be0>] (process_one_work) from [<c0134e40>] (worker_thread+0x2c/0x4b4)
+[<c0134e40>] (worker_thread) from [<c013a34c>] (kthread+0xfc/0x134)
+[<c013a34c>] (kthread) from [<c0107938>] (ret_from_fork+0x14/0x3c)
 max98090 0-0010: MAX98090 REVID=0x43
 max98090 0-0010: use default 2.8v micbias
 tegra-snd-max98090 sound: HiFi <-> 70301100.i2s mapping ok
@@ -402,7 +402,6 @@
 mmc2: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
-input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
 usb 1-2: new high-speed USB device number 2 using tegra-xusb
 mmc2: new high speed SDHC card at address 0007
 mmcblk2: mmc2:0007 SD08G 7.42 GiB 
@@ -412,11 +411,12 @@
 GPT:3014591 != 15564799
 GPT: Use GNU Parted to correct GPT errors.
  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
+input: tegra-hda HDMI/DP,pcm=3 as /devices/soc0/70030000.hda/sound/card0/input3
 Console: switching to colour frame buffer device 170x48
 drm drm: fb0:  frame buffer device
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
 input: gpio-keys as /devices/soc0/gpio-keys/input/input4
-as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822)
+as3722-rtc as3722-rtc: setting system clock to 2000-01-01 00:00:23 UTC (946684823)
 +1.8V_RUN_CAM: disabling
 +1.2V_RUN_CAM_FRONT: disabling
 +1.05V_RUN_CAM_REAR: disabling
@@ -437,4 +437,4 @@
 input: HD WebCam as /devices/soc0/70090000.usb/usb1/1-2/1-2:1.0/input/input5
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+root@(none):/# [    3.2
\ No newline at end of file
Diff for ./tegra132-norrin/tegra132-norrin/defconfig_log.txt
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-01 15:14:55.823917090 -0800
+++ /tmp/foob	2017-01-01 15:14:55.823917090 -0800
@@ -49,7 +49,7 @@
 	 ##################################################
 	 4.1 MiB/s
 done
-Bytes transferred = 7403096 (70f658 hex)
+Bytes transferred = 7403088 (70f650 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -60,7 +60,7 @@
 done
 Bytes transferred = 21404 (539c hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x70f658 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x70f650 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 0241039b
@@ -68,7 +68,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc1-141325-g7ce7d89 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Dec 25 16:40:13 PST 2016
+Linux version 4.10.0-rc2-141358-g0c744ea (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jan 1 15:05:44 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: Compulab TrimSlice board
@@ -334,25 +334,25 @@
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
-tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
-hub 2-0:1.0: USB hub found
 mmc0: host does not support reading read-only switch, assuming write-enable
-hub 2-0:1.0: 1 port detected
 mmc0: new high speed SDHC card at address b368
-input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
 mmcblk0: mmc0:b368 NCard 3.70 GiB 
-rtc-em3027 2-0056: setting system clock to 2015-02-06 02:49:55 UTC (1423190995)
  mmcblk0: p1
-EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
+tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 mmc1: new high speed SD card at address b368
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+rtc-em3027 2-0056: setting system clock to 2015-02-06 02:52:59 UTC (1423191179)
  mmcblk1: p1 p2
+EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 hub 1-1:1.0: USB hub found
 hub 1-1:1.0: 4 ports detected
 usb 1-1.2: new high-speed USB device number 3 using tegra-ehci
-random: fast init done
 asix 1-1.2:1.0 eth1: register 'asix' at usb-c5008000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 00:60:6e:60:6c:68
+random: fast init done
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-01 15:14:55.831917119 -0800
+++ /tmp/foob	2017-01-01 15:14:55.831917119 -0800
@@ -45,9 +45,9 @@
 	 #################################################################
 	 #################################################################
 	 ##################################################
-	 4 MiB/s
+	 4.1 MiB/s
 done
-Bytes transferred = 5504520 (53fe08 hex)
+Bytes transferred = 5504528 (53fe10 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -58,7 +58,7 @@
 done
 Bytes transferred = 21404 (539c hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x53fe08 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x53fe10 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 0241039b
@@ -67,7 +67,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc1-141325-g7ce7d89 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Dec 25 16:40:02 PST 2016
+Linux version 4.10.0-rc2-141358-g0c744ea (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jan 1 15:05:35 PST 2017
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: Compulab TrimSlice board
@@ -310,21 +310,21 @@
 tlv320aic23-codec 2-001a: ASoC: no dapm match for RLINEIN --> NULL --> Line Input
 tlv320aic23-codec 2-001a: ASoC: Failed to add route RLINEIN -> NULL -> Line Input
 tlv320aic23-codec 2-001a: Control not supported for path MICIN -> [NULL] -> Mic Input
-tlv320aic23-codec 2-001a: ASoC: no dapm match for MICIN --> NULL --> Mic Input
-tlv320aic23-codec 2-001a: ASoC: Failed to add route MICIN -> NULL -> Mic Input
-tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok
-NET: Registered protocol family 10
 mmc0: host does not support reading read-only switch, assuming write-enable
 mmc0: new high speed SDHC card at address b368
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
 mmcblk0: mmc0:b368 NCard 3.70 GiB 
  mmcblk0: p1
+tlv320aic23-codec 2-001a: ASoC: no dapm match for MICIN --> NULL --> Mic Input
+tlv320aic23-codec 2-001a: ASoC: Failed to add route MICIN -> NULL -> Mic Input
+tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
+NET: Registered protocol family 10
 mmc1: new high speed SD card at address b368
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
- mmcblk1: p1 p2
 Segment Routing with IPv6
 mip6: Mobile IPv6
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
+ mmcblk1: p1 p2
 NET: Registered protocol family 17
 NET: Registered protocol family 15
 can: controller area network core (rev 20120528 abi 9)
@@ -350,7 +350,7 @@
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-rtc-em3027 2-0056: setting system clock to 2015-02-06 02:48:24 UTC (1423190904)
+rtc-em3027 2-0056: setting system clock to 2015-02-06 02:51:24 UTC (1423191084)
 ALSA device list:
   #0: tegra-trimslice
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
Diff for ./tegra210-p2371-0000/tegra210-p2371-0000/defconfig_log.txt
Diff for ./tegra210-smaug/tegra210-smaug/defconfig_log.txt
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2017-01-01 15:14:55.839917147 -0800
+++ /tmp/foob	2017-01-01 15:14:55.843917161 -0800
@@ -39,9 +39,9 @@
 	 #################################################################
 	 #################################################################
 	 ##################################################
-	 3.2 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 7403096 (70f658 hex)
+Bytes transferred = 7403088 (70f650 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -52,7 +52,7 @@
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x70f658 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x70f650 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -60,7 +60,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc1-141325-g7ce7d89 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Dec 25 16:40:13 PST 2016
+Linux version 4.10.0-rc2-141358-g0c744ea (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jan 1 15:05:44 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -312,11 +312,11 @@
 mmcblk1boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
 mmcblk1boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
 mmcblk1rpmb: mmc1:0001 SEM16G partition 3 128 KiB
-mmc0: new ultra high speed DDR50 SDHC card at address aaaa
-mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
 Primary GPT is invalid, using alternate GPT.
  mmcblk1: p1 p2 p3 p4 p5
+mmc0: new ultra high speed DDR50 SDHC card at address aaaa
 tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
+mmcblk0: mmc0:aaaa SS04G 3.69 GiB 
  mmcblk0: p1 p2 p3
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
@@ -395,4 +395,4 @@
 Freeing unused kernel memory: 2048K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+root@(none):/# [    3.978625] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2017-01-01 15:14:55.851917190 -0800
+++ /tmp/foob	2017-01-01 15:14:55.851917190 -0800
@@ -37,20 +37,20 @@
 	 #################################################################
 	 #################################################################
 	 ##################################################
-	 3.1 MiB/s
+	 3.2 MiB/s
 done
-Bytes transferred = 5504520 (53fe08 hex)
+Bytes transferred = 5504528 (53fe10 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.9 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 51804 (ca5c hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x53fe08 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x53fe10 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffffa5b ... OK
@@ -59,7 +59,7 @@
 
 Uncompressing Linux... done, booting the kernel.
 Booting Linux on physical CPU 0x0
-Linux version 4.10.0-rc1-141325-g7ce7d89 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Dec 25 16:40:02 PST 2016
+Linux version 4.10.0-rc2-141358-g0c744ea (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jan 1 15:05:35 PST 2017
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 OF: fdt:Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -391,4 +391,4 @@
 Freeing unused kernel memory: 1024K
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.470391] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.480301] usb 2-1: new high-speed USB device number 2 using tegra-ehci
