Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2015-05-18 10:38:54.795559830 -0700
+++ /tmp/foob	2015-05-18 10:38:54.799559828 -0700
@@ -1,11 +1,10 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
-Linux version 4.1.0-rc3+ (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Sun May 10 16:35:40 PDT 2015
+Linux version 4.1.0-rc4+ (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Mon May 18 10:35:17 PDT 2015
 CPU: AArch64 Processor [411fd070] revision 0
 Detected PIPT I-cache on CPU0
 alternatives: enabling workaround for ARM erratum 832075
 Memory limited to 1024MB
-earlycon: no match for ttyAMA0,38400n8
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
 cma: Reserved 16 MiB at 0x000000007f000000
@@ -19,7 +18,7 @@
 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
 Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
 software IO TLB [mem 0x79c00000-0x7dc00000] (64MB) mapped at [ffffffc039c00000-ffffffc03dbfffff]
-Memory: 939548K/1048576K available (5381K kernel code, 438K rwdata, 2136K rodata, 324K init, 202K bss, 92644K reserved, 16384K cma-reserved)
+Memory: 939548K/1048576K available (5385K kernel code, 435K rwdata, 2136K rodata, 324K init, 202K bss, 92644K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000   (   246 GB)
     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
@@ -28,9 +27,9 @@
     PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000   (    16 MB)
     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
     memory  : 0xffffffc000000000 - 0xffffffc040000000   (  1024 MB)
-      .init : 0xffffffc0007da000 - 0xffffffc00082b000   (   324 KB)
-      .text : 0xffffffc000080000 - 0xffffffc0007d9544   (  7526 KB)
-      .data : 0xffffffc000831000 - 0xffffffc00089ea00   (   439 KB)
+      .init : 0xffffffc0007db000 - 0xffffffc00082c000   (   324 KB)
+      .text : 0xffffffc000080000 - 0xffffffc0007da564   (  7530 KB)
+      .data : 0xffffffc000832000 - 0xffffffc00089ec00   (   435 KB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 Preemptible hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
@@ -87,7 +86,7 @@
 kvm [1]: HYP mode not available
 futex hash table entries: 256 (order: 2, 16384 bytes)
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.460:1): initialized
+audit: type=2000 audit(0.430:1): initialized
 HugeTLB registered 2 MB page size, pre-allocated 0 pages
 VFS: Disk quotas dquot_6.6.0
 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
@@ -130,8 +129,8 @@
 EXT4-fs (vda2): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 254:2.
 devtmpfs: mounted
-Freeing unused kernel memory: 324K (ffffffc0007da000 - ffffffc00082b000)
-Freeing alternatives memory: 12K (ffffffc00082b000 - ffffffc00082e000)
+Freeing unused kernel memory: 324K (ffffffc0007db000 - ffffffc00082c000)
+Freeing alternatives memory: 12K (ffffffc00082c000 - ffffffc00082f000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 bash-4.3# 
\ No newline at end of file
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2015-05-18 10:38:54.811559822 -0700
+++ /tmp/foob	2015-05-18 10:38:54.815559820 -0700
@@ -37,10 +37,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###################################
-	 3.2 MiB/s
+	 ####################################
+	 3.4 MiB/s
 done
-Bytes transferred = 6238920 (5f32c8 hex)
+Bytes transferred = 6239792 (5f3630 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
@@ -51,7 +51,7 @@
 done
 Bytes transferred = 34894 (884e hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5f32c8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5f3630 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff84d ... OK
@@ -59,16 +59,15 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.1.0-rc3-12646-g030bbdb (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun May 10 16:34:08 PDT 2015
+Linux version 4.1.0-rc4-12997-ge260818 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon May 18 10:33:59 PDT 2015
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
 debug: ignoring loglevel setting.
-earlycon: no match for ttyS0,115200n8
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0f25b80, node_mem_map ee7f8000
+free_area_init_node: node 0, pgdat c0f25e40, node_mem_map ee7f8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
@@ -81,7 +80,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999244K/2096128K available (7987K kernel code, 1022K rwdata, 3588K rodata, 836K init, 318K bss, 31348K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 1999244K/2096128K available (7987K kernel code, 1023K rwdata, 3588K rodata, 836K init, 318K bss, 31348K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -89,9 +88,9 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0d56f60   (11580 kB)
+      .text : 0xc0208000 - 0xc0d56f50   (11580 kB)
       .init : 0xc0d57000 - 0xc0e28000   ( 836 kB)
-      .data : 0xc0e28000 - 0xc0f27b60   (1023 kB)
+      .data : 0xc0e28000 - 0xc0f27e20   (1024 kB)
        .bss : 0xc0f2a000 - 0xc0f79a68   ( 319 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -303,7 +302,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-15 18:59:05 UTC (971636345)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-23 12:59:16 UTC (972305956)
 vdd_cam_1v8_reg: disabling
 usb1_vbus: disabling
 dvdd_ts: disabling
@@ -317,4 +316,4 @@
 Freeing unused kernel memory: 836K (c0d57000 - c0e28000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.618684] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.603726] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2015-05-18 10:38:54.819559817 -0700
+++ /tmp/foob	2015-05-18 10:38:54.823559815 -0700
@@ -14,7 +14,7 @@
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra114 (Dalmore) # 
 Tegra114 (Dalmore) # usb reset
 (Re)start USB...
@@ -37,20 +37,20 @@
 	 #################################################################
 	 #################################################################
 	 ########
-	 3.4 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 4883712 (4a8500 hex)
+Bytes transferred = 4884248 (4a8718 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.2 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 34894 (884e hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x4a8500 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x4a8718 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff84d ... OK
@@ -61,16 +61,15 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 4.1.0-rc3-12646-g030bbdb (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun May 10 16:34:21 PDT 2015
+Linux version 4.1.0-rc4-12997-ge260818 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon May 18 10:34:16 PDT 2015
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
 debug: ignoring loglevel setting.
-earlycon: no match for ttyS0,115200n8
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0962380, node_mem_map ee7f7000
+free_area_init_node: node 0, pgdat c0962480, node_mem_map ee7f7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
@@ -83,7 +82,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2003060K/2096128K available (6696K kernel code, 311K rwdata, 2260K rodata, 312K init, 351K bss, 27532K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 2003056K/2096128K available (6696K kernel code, 312K rwdata, 2260K rodata, 312K init, 351K bss, 27536K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -91,10 +90,10 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc08c74fc   (8958 kB)
+      .text : 0xc0008000 - 0xc08c74e4   (8958 kB)
       .init : 0xc08c8000 - 0xc0916000   ( 312 kB)
-      .data : 0xc0916000 - 0xc0963f20   ( 312 kB)
-       .bss : 0xc0966000 - 0xc09bde14   ( 352 kB)
+      .data : 0xc0916000 - 0xc0964020   ( 313 kB)
+       .bss : 0xc0967000 - 0xc09bee14   ( 352 kB)
 Preemptible hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
 NR_IRQS:16 nr_irqs:16 16
@@ -294,7 +293,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-15 18:59:31 UTC (971636371)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-23 12:59:44 UTC (972305984)
 vdd_cam_1v8_reg: disabling
 usb1_vbus: disabling
 dvdd_ts: disabling
@@ -309,4 +308,4 @@
 Freeing unused kernel memory: 312K (c08c8000 - c0916000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.779651] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.789708] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2015-05-18 10:38:54.839559806 -0700
+++ /tmp/foob	2015-05-18 10:38:54.843559804 -0700
@@ -33,29 +33,27 @@
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'zImage.multi_v7_defconfig'.
 Load address: 0x81000000
-Loading: *EHCI timed out on TD - token=0x88008d80
-T #################################################################
+Loading: *#################################################################
 	 #################################################################
 	 #################################################################
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###################################
-	 545.9 KiB/s
+	 ####################################
+	 3.2 MiB/s
 done
-Bytes transferred = 6238920 (5f32c8 hex)
+Bytes transferred = 6239792 (5f3630 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x82000000 tegra124-jetson-tk1.dtb
-Waiting for Ethernet connection... done.
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x82000000
 Loading: *#####
-	 3.2 MiB/s
+	 2.9 MiB/s
 done
 Bytes transferred = 63003 (f61b hex)
 Tegra124 (Jetson TK1) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5f32c8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5f3630 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Using Device Tree in place at 82000000, end 8201261a
@@ -63,16 +61,15 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.1.0-rc3-12646-g030bbdb (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun May 10 16:34:08 PDT 2015
+Linux version 4.1.0-rc4-12997-ge260818 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon May 18 10:33:59 PDT 2015
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra124 Jetson TK1
 debug: ignoring loglevel setting.
-earlycon: no match for ttyS0,115200n8
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0f25b80, node_mem_map ee7f8000
+free_area_init_node: node 0, pgdat c0f25e40, node_mem_map ee7f8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
@@ -85,7 +82,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999140K/2096128K available (7987K kernel code, 1022K rwdata, 3588K rodata, 836K init, 318K bss, 31452K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 1999140K/2096128K available (7987K kernel code, 1023K rwdata, 3588K rodata, 836K init, 318K bss, 31452K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -93,9 +90,9 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0d56f60   (11580 kB)
+      .text : 0xc0208000 - 0xc0d56f50   (11580 kB)
       .init : 0xc0d57000 - 0xc0e28000   ( 836 kB)
-      .data : 0xc0e28000 - 0xc0f27b60   (1023 kB)
+      .data : 0xc0e28000 - 0xc0f27e20   (1024 kB)
        .bss : 0xc0f2a000 - 0xc0f79a68   ( 319 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -355,7 +352,7 @@
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:27 UTC (949363227)
+as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_VPP_FUSE: disabling
 +2.8V_RUN_CAM_AF: disabling
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2015-05-18 10:38:54.847559801 -0700
+++ /tmp/foob	2015-05-18 10:38:54.851559799 -0700
@@ -41,18 +41,18 @@
 	 ########
 	 3.2 MiB/s
 done
-Bytes transferred = 4883712 (4a8500 hex)
+Bytes transferred = 4884248 (4a8718 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x82000000 tegra124-jetson-tk1.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x82000000
 Loading: *#####
-	 3 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 63003 (f61b hex)
 Tegra124 (Jetson TK1) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x4a8500 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x4a8718 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Using Device Tree in place at 82000000, end 8201261a
@@ -63,16 +63,15 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 4.1.0-rc3-12646-g030bbdb (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun May 10 16:34:21 PDT 2015
+Linux version 4.1.0-rc4-12997-ge260818 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon May 18 10:34:16 PDT 2015
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra124 Jetson TK1
 debug: ignoring loglevel setting.
-earlycon: no match for ttyS0,115200n8
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0962380, node_mem_map ee7f7000
+free_area_init_node: node 0, pgdat c0962480, node_mem_map ee7f7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
@@ -85,7 +84,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2002956K/2096128K available (6696K kernel code, 311K rwdata, 2260K rodata, 312K init, 351K bss, 27636K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 2002952K/2096128K available (6696K kernel code, 312K rwdata, 2260K rodata, 312K init, 351K bss, 27640K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -93,10 +92,10 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc08c74fc   (8958 kB)
+      .text : 0xc0008000 - 0xc08c74e4   (8958 kB)
       .init : 0xc08c8000 - 0xc0916000   ( 312 kB)
-      .data : 0xc0916000 - 0xc0963f20   ( 312 kB)
-       .bss : 0xc0966000 - 0xc09bde14   ( 352 kB)
+      .data : 0xc0916000 - 0xc0964020   ( 313 kB)
+       .bss : 0xc0967000 - 0xc09bee14   ( 352 kB)
 Preemptible hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
 NR_IRQS:16 nr_irqs:16 16
@@ -301,44 +300,16 @@
 tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
 tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
+tegra-pcie 1003000.pcie-controller: link 1 down, retrying
+tegra-pcie 1003000.pcie-controller: link 1 down, retrying
+tegra-pcie 1003000.pcie-controller: link 1 down, retrying
+tegra-pcie 1003000.pcie-controller: link 1 down, ignoring
 tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
 pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
 pci_bus 0000:00: root bus resource [bus 00-ff]
 pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
-pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
-pci 0000:00:02.0: IOMMU is currently not supported for PCI
-pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
-PCI: bus0: Fast back to back transfers disabled
-pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
-pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
-pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
-pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
-pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
-pci 0000:01:00.0: IOMMU is currently not supported for PCI
-pci 0000:01:00.0: supports D1 D2
-pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
-PCI: bus1: Fast back to back transfers disabled
-pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
-pci 0000:00:02.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
-pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
-pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
-pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
-pci 0000:01:00.0: BAR 2: assigned [mem 0x13000000-0x13000fff 64bit]
-pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
-pci 0000:00:02.0: PCI bridge to [bus 01]
-pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
-pci 0000:00:02.0:   bridge window [mem 0x13000000-0x130fffff]
-pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
-pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
-pcieport 0000:00:02.0: enabling device (0140 -> 0143)
-pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
-pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
-pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
-r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
-r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xf00e0000, 00:04:4b:25:b3:b4, XID 0c000800 IRQ 382
-r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
+PCI: bus0: Fast back to back transfers enabled
 +5V_HDMI_CON: supplied by +5V_SYS
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 +3.3V_RUN: supplied by +3.3V_SYS
@@ -373,7 +344,7 @@
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:58 UTC (949363258)
+as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:52 UTC (949363252)
 +USB0_VBUS_SW: disabling
 +1.8V_RUN_VPP_FUSE: disabling
 +2.8V_RUN_CAM_AF: disabling
@@ -386,8 +357,8 @@
   #0: NVIDIA Tegra Jetson TK1
 ata1: SATA link down (SStatus 0 SControl 300)
 EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
-usb 2-1: new high-speed USB device number 2 using tegra-ehci
 EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (244)
+usb 2-1: new high-speed USB device number 2 using tegra-ehci
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:1.
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2015-05-18 10:38:54.859559794 -0700
+++ /tmp/foob	2015-05-18 10:38:54.863559792 -0700
@@ -43,21 +43,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###################################
+	 ####################################
 	 4 MiB/s
 done
-Bytes transferred = 6238920 (5f32c8 hex)
+Bytes transferred = 6239792 (5f3630 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 4 MiB/s
+	 3.4 MiB/s
 done
 Bytes transferred = 21130 (528a hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5f32c8 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5f3630 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 02410289
@@ -65,16 +65,15 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.1.0-rc3-12646-g030bbdb (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun May 10 16:34:08 PDT 2015
+Linux version 4.1.0-rc4-12997-ge260818 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon May 18 10:33:59 PDT 2015
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: Compulab TrimSlice board
 debug: ignoring loglevel setting.
-earlycon: no match for ttyS0,115200n8
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0f25b80, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c0f25e40, node_mem_map eeff8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
@@ -87,7 +86,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 960052K/1048576K available (7987K kernel code, 1022K rwdata, 3588K rodata, 836K init, 318K bss, 22988K reserved, 65536K cma-reserved, 204800K highmem)
+Memory: 960052K/1048576K available (7987K kernel code, 1023K rwdata, 3588K rodata, 836K init, 318K bss, 22988K reserved, 65536K cma-reserved, 204800K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -95,9 +94,9 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0d56f60   (11580 kB)
+      .text : 0xc0208000 - 0xc0d56f50   (11580 kB)
       .init : 0xc0d57000 - 0xc0e28000   ( 836 kB)
-      .data : 0xc0e28000 - 0xc0f27b60   (1023 kB)
+      .data : 0xc0e28000 - 0xc0f27e20   (1024 kB)
        .bss : 0xc0f2a000 - 0xc0f79a68   ( 319 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
@@ -334,24 +333,24 @@
 can: netlink gateway (rev 20130117) max_hops=1
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
+mmc0: host does not support reading read-only switch, assuming write-enable
+mmc0: new high speed SDHC card at address b368
+mmcblk0: mmc0:b368 NCard 3.70 GiB 
+ mmcblk0: p1
 Registering SWP/SWPB emulation handler
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
-mmc0: host does not support reading read-only switch, assuming write-enable
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
-mmc0: new high speed SDHC card at address b368
-mmcblk0: mmc0:b368 NCard 3.70 GiB 
- mmcblk0: p1
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
-input: gpio-keys as /devices/soc0/gpio-keys/input/input0
 hub 1-1:1.0: USB hub found
-rtc-em3027 2-0056: setting system clock to 2014-12-25 20:13:22 UTC (1419538402)
+input: gpio-keys as /devices/soc0/gpio-keys/input/input0
+hub 1-1:1.0: 4 ports detected
+rtc-em3027 2-0056: setting system clock to 2014-12-25 20:22:24 UTC (1419538944)
 ALSA device list:
   #0: tegra-trimslice
-hub 1-1:1.0: 4 ports detected
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
 mmc1: new high speed SD card at address b368
 mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2015-05-18 10:38:54.871559788 -0700
+++ /tmp/foob	2015-05-18 10:38:54.871559788 -0700
@@ -43,9 +43,9 @@
 	 #################################################################
 	 #################################################################
 	 ########
-	 3.9 MiB/s
+	 4.1 MiB/s
 done
-Bytes transferred = 4883712 (4a8500 hex)
+Bytes transferred = 4884248 (4a8718 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
@@ -56,7 +56,7 @@
 done
 Bytes transferred = 21130 (528a hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x4a8500 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x4a8718 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
    Using Device Tree in place at 02408000, end 02410289
@@ -67,17 +67,16 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 4.1.0-rc3-12646-g030bbdb (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun May 10 16:34:21 PDT 2015
+Linux version 4.1.0-rc4-12997-ge260818 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon May 18 10:34:16 PDT 2015
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: Compulab TrimSlice board
 debug: ignoring loglevel setting.
-earlycon: no match for ttyS0,115200n8
 bootconsole [earlycon0] enabled
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0962380, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0962480, node_mem_map eeff7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
@@ -90,7 +89,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 963868K/1048576K available (6696K kernel code, 311K rwdata, 2260K rodata, 312K init, 351K bss, 19172K reserved, 65536K cma-reserved, 204800K highmem)
+Memory: 963864K/1048576K available (6696K kernel code, 312K rwdata, 2260K rodata, 312K init, 351K bss, 19176K reserved, 65536K cma-reserved, 204800K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -98,10 +97,10 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc08c74fc   (8958 kB)
+      .text : 0xc0008000 - 0xc08c74e4   (8958 kB)
       .init : 0xc08c8000 - 0xc0916000   ( 312 kB)
-      .data : 0xc0916000 - 0xc0963f20   ( 312 kB)
-       .bss : 0xc0966000 - 0xc09bde14   ( 352 kB)
+      .data : 0xc0916000 - 0xc0964020   ( 313 kB)
+       .bss : 0xc0967000 - 0xc09bee14   ( 352 kB)
 Preemptible hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
@@ -342,10 +341,10 @@
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-rtc-em3027 2-0056: setting system clock to 2014-12-25 20:13:40 UTC (1419538420)
-hub 1-1:1.0: USB hub found
+rtc-em3027 2-0056: setting system clock to 2014-12-25 20:22:44 UTC (1419538964)
 ALSA device list:
   #0: tegra-trimslice
+hub 1-1:1.0: USB hub found
 hub 1-1:1.0: 4 ports detected
 mmcblk0: mmc0:b368 NCard 3.70 GiB 
  mmcblk0: p1
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2015-05-18 10:38:54.879559783 -0700
+++ /tmp/foob	2015-05-18 10:38:54.883559781 -0700
@@ -37,21 +37,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ###################################
-	 3.3 MiB/s
+	 ####################################
+	 3.4 MiB/s
 done
-Bytes transferred = 6238920 (5f32c8 hex)
+Bytes transferred = 6239792 (5f3630 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.3 MiB/s
+	 3.5 MiB/s
 done
 Bytes transferred = 51191 (c7f7 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5f32c8 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5f3630 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff7f6 ... OK
@@ -59,16 +59,15 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.1.0-rc3-12646-g030bbdb (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun May 10 16:34:08 PDT 2015
+Linux version 4.1.0-rc4-12997-ge260818 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon May 18 10:33:59 PDT 2015
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
 debug: ignoring loglevel setting.
-earlycon: no match for ttyS0,115200n8
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0f25b80, node_mem_map ee7f8000
+free_area_init_node: node 0, pgdat c0f25e40, node_mem_map ee7f8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
@@ -81,7 +80,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999164K/2096128K available (7987K kernel code, 1022K rwdata, 3588K rodata, 836K init, 318K bss, 31428K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 1999164K/2096128K available (7987K kernel code, 1023K rwdata, 3588K rodata, 836K init, 318K bss, 31428K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -89,9 +88,9 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0d56f60   (11580 kB)
+      .text : 0xc0208000 - 0xc0d56f50   (11580 kB)
       .init : 0xc0d57000 - 0xc0e28000   ( 836 kB)
-      .data : 0xc0e28000 - 0xc0f27b60   (1023 kB)
+      .data : 0xc0e28000 - 0xc0f27e20   (1024 kB)
        .bss : 0xc0f2a000 - 0xc0f79a68   ( 319 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
@@ -378,4 +377,4 @@
 Freeing unused kernel memory: 836K (c0d57000 - c0e28000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.223485] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.208476] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2015-05-18 10:38:54.887559779 -0700
+++ /tmp/foob	2015-05-18 10:38:54.891559777 -0700
@@ -27,7 +27,6 @@
 Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd'
 Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
 Tegra30 (Beaver) # tftpboot 0x81000000 zImage.tegra_defconfig
-Waiting for Ethernet connection... done.
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'zImage.tegra_defconfig'.
@@ -38,20 +37,20 @@
 	 #################################################################
 	 #################################################################
 	 ########
-	 3.3 MiB/s
+	 3.4 MiB/s
 done
-Bytes transferred = 4883712 (4a8500 hex)
+Bytes transferred = 4884248 (4a8718 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3.3 MiB/s
+	 3.1 MiB/s
 done
 Bytes transferred = 51191 (c7f7 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x4a8500 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x4a8718 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff0000, end 8ffff7f6 ... OK
@@ -62,16 +61,15 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 4.1.0-rc3-12646-g030bbdb (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun May 10 16:34:21 PDT 2015
+Linux version 4.1.0-rc4-12997-ge260818 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon May 18 10:34:16 PDT 2015
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
 debug: ignoring loglevel setting.
-earlycon: no match for ttyS0,115200n8
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0962380, node_mem_map ee7f7000
+free_area_init_node: node 0, pgdat c0962480, node_mem_map ee7f7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
@@ -84,7 +82,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2002980K/2096128K available (6696K kernel code, 311K rwdata, 2260K rodata, 312K init, 351K bss, 27612K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 2002976K/2096128K available (6696K kernel code, 312K rwdata, 2260K rodata, 312K init, 351K bss, 27616K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -92,10 +90,10 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc08c74fc   (8958 kB)
+      .text : 0xc0008000 - 0xc08c74e4   (8958 kB)
       .init : 0xc08c8000 - 0xc0916000   ( 312 kB)
-      .data : 0xc0916000 - 0xc0963f20   ( 312 kB)
-       .bss : 0xc0966000 - 0xc09bde14   ( 352 kB)
+      .data : 0xc0916000 - 0xc0964020   ( 313 kB)
+       .bss : 0xc0967000 - 0xc09bee14   ( 352 kB)
 Preemptible hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
 NR_IRQS:16 nr_irqs:16 16
@@ -372,4 +370,4 @@
 Freeing unused kernel memory: 312K (c08c8000 - c0916000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.496489] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.466213] usb 2-1: new high-speed USB device number 2 using tegra-ehci
