Diff for ./qemu-vexpress64/__internal/defconfig_log.txt
--- /tmp/fooa	2015-04-26 18:38:24.639525538 -0700
+++ /tmp/foob	2015-04-26 18:38:24.639525538 -0700
@@ -1,44 +1,45 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
-Linux version 4.0.0+ (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Mon Apr 13 09:57:46 PDT 2015
+Linux version 4.1.0-rc1+ (pwalmsley@tamien) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Sun Apr 26 18:34:32 PDT 2015
 CPU: AArch64 Processor [411fd070] revision 0
 Detected PIPT I-cache on CPU0
+alternatives: enabling workaround for ARM erratum 832075
 Memory limited to 1024MB
+earlycon: no match for ttyAMA0,38400n8
 efi: Getting EFI parameters from FDT:
 efi: UEFI not found.
 cma: Reserved 16 MiB at 0x000000007f000000
 psci: probing for conduit method from DT.
 psci: PSCIv0.2 detected in firmware.
 psci: Using standard PSCI v0.2 function IDs
-PERCPU: Embedded 14 pages/cpu @ffffffc03efe1000 s19456 r8192 d29696 u57344
+PERCPU: Embedded 16 pages/cpu @ffffffc03efdf000 s27968 r8192 d29376 u65536
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258048
 Kernel command line: root=/dev/vda2 rw rootwait mem=1024M console=ttyAMA0,38400n8 init=/bin/bash
 PID hash table entries: 4096 (order: 3, 32768 bytes)
 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
 Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
 software IO TLB [mem 0x79c00000-0x7dc00000] (64MB) mapped at [ffffffc039c00000-ffffffc03dbfffff]
-Memory: 940328K/1048576K available (5041K kernel code, 342K rwdata, 1884K rodata, 256K init, 200K bss, 91864K reserved, 16384K cma-reserved)
+Memory: 939548K/1048576K available (5385K kernel code, 434K rwdata, 2136K rodata, 324K init, 203K bss, 92644K reserved, 16384K cma-reserved)
 Virtual kernel memory layout:
     vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000   (   246 GB)
     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
               0xffffffbdc1000000 - 0xffffffbdc2000000   (    16 MB actual)
-    fixed   : 0xffffffbffabfe000 - 0xffffffbffac00000   (     8 KB)
+    fixed   : 0xffffffbffabfd000 - 0xffffffbffac00000   (    12 KB)
     PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000   (    16 MB)
     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
     memory  : 0xffffffc000000000 - 0xffffffc040000000   (  1024 MB)
-      .init : 0xffffffc000746000 - 0xffffffc000786000   (   256 KB)
-      .text : 0xffffffc000080000 - 0xffffffc0007454e4   (  6934 KB)
-      .data : 0xffffffc00078a000 - 0xffffffc0007df800   (   342 KB)
+      .init : 0xffffffc0007db000 - 0xffffffc00082c000   (   324 KB)
+      .text : 0xffffffc000080000 - 0xffffffc0007da544   (  7530 KB)
+      .data : 0xffffffc000832000 - 0xffffffc00089e800   (   434 KB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 Preemptible hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
 RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
 NR_IRQS:64 nr_irqs:64 0
-GIC CPU mask not found - kernel will fail to boot.
-GIC CPU mask not found - kernel will fail to boot.
 Architected cp15 timer(s) running at 62.50MHz (virt).
-sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 2199023255552ns
+clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
+sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns
 Console: colour dummy device 80x25
 Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
 pid_max: default: 32768 minimum: 301
@@ -51,12 +52,16 @@
 EFI services will not be available.
 Brought up 1 CPUs
 SMP: Total of 1 processors activated.
+CPU: All CPU(s) started at EL1
+alternatives: patching kernel code
 devtmpfs: initialized
 DMI not present or invalid.
+clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 cpuidle: using governor ladder
 cpuidle: using governor menu
-vdso: 2 pages (1 code @ ffffffc000791000, 1 data @ ffffffc000790000)
+vdso: 2 pages (1 code @ ffffffc000839000, 1 data @ ffffffc000838000)
 hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 DMA: preallocated 256 KiB pool for atomic allocations
 Serial: AMBA PL011 UART driver
@@ -72,7 +77,6 @@
 TCP established hash table entries: 8192 (order: 4, 65536 bytes)
 TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
-TCP: reno registered
 UDP hash table entries: 512 (order: 2, 16384 bytes)
 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
 NET: Registered protocol family 1
@@ -83,19 +87,25 @@
 kvm [1]: HYP mode not available
 futex hash table entries: 256 (order: 2, 16384 bytes)
 audit: initializing netlink subsys (disabled)
-audit: type=2000 audit(0.420:1): initialized
+audit: type=2000 audit(0.430:1): initialized
 HugeTLB registered 2 MB page size, pre-allocated 0 pages
-VFS: Disk quotas dquot_6.5.2
+VFS: Disk quotas dquot_6.6.0
 VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
 fuse init (API version 7.23)
 9p: Installing v9fs 9p2000 file system support
 io scheduler noop registered
 io scheduler cfq registered (default)
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+msm_serial: driver initialized
+Unable to detect cache hierarcy from DT for CPU 0
 loop: module loaded
  vda: vda1 vda2
 tun: Universal TUN/TAP device driver, 1.6
 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
+sky2: driver version 1.30
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-pci: EHCI PCI platform driver
 ehci-platform: EHCI generic platform driver
@@ -104,25 +114,24 @@
 ohci-platform: OHCI generic platform driver
 usbcore: registered new interface driver usb-storage
 mousedev: PS/2 mouse device common for all mice
-Driver 'mmcblk' needs updating - please use bus_type methods
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-TCP: cubic registered
 NET: Registered protocol family 17
 9pnet: Installing 9P2000 support
+Key type dns_resolver registered
 registered taskstats version 1
-drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
+hctosys: unable to open rtc device (rtc0)
 EXT3-fs (vda2): error: couldn't mount because of unsupported optional features (240)
 EXT2-fs (vda2): error: couldn't mount because of unsupported optional features (244)
 EXT4-fs (vda2): recovery complete
 EXT4-fs (vda2): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 254:2.
 devtmpfs: mounted
-Freeing unused kernel memory: 256K (ffffffc000746000 - ffffffc000786000)
-Freeing alternatives memory: 8K (ffffffc000786000 - ffffffc000788000)
+Freeing unused kernel memory: 324K (ffffffc0007db000 - ffffffc00082c000)
+Freeing alternatives memory: 12K (ffffffc00082c000 - ffffffc00082f000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 bash-4.3# 
\ No newline at end of file
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2015-04-26 18:38:24.675525518 -0700
+++ /tmp/foob	2015-04-26 18:38:24.675525518 -0700
@@ -37,10 +37,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #########################
+	 ###################################
 	 3.3 MiB/s
 done
-Bytes transferred = 6082800 (5cd0f0 hex)
+Bytes transferred = 6227624 (5f06a8 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
@@ -49,38 +49,39 @@
 Loading: *###
 	 3 MiB/s
 done
-Bytes transferred = 34638 (874e hex)
+Bytes transferred = 34894 (884e hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5cd0f0 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5f06a8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff4000, end 8ffff74d ... OK
+   Loading Device Tree to 8fff4000, end 8ffff84d ... OK
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.0.0-00776-g39a8804 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Apr 13 09:56:56 PDT 2015
+Linux version 4.1.0-rc1-12186-gb787f68 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Apr 26 18:33:34 PDT 2015
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
 debug: ignoring loglevel setting.
+earlycon: no match for ttyS0,115200n8
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0ec7880, node_mem_map ee7f8000
+free_area_init_node: node 0, pgdat c0f1d340, node_mem_map ee7f8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
   HighMem zone: 329472 pages, LIFO batch:31
-PERCPU: Embedded 11 pages/cpu @ee7a7000 s12480 r8192 d24384 u45056
-pcpu-alloc: s12480 r8192 d24384 u45056 alloc=11*4096
+PERCPU: Embedded 12 pages/cpu @ee7a3000 s16960 r8192 d24000 u49152
+pcpu-alloc: s16960 r8192 d24000 u49152 alloc=12*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999648K/2096128K available (7834K kernel code, 1013K rwdata, 3412K rodata, 796K init, 316K bss, 30944K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 1999276K/2096128K available (7987K kernel code, 1020K rwdata, 3576K rodata, 816K init, 317K bss, 31316K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -88,21 +89,24 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0d04b40   (11251 kB)
-      .init : 0xc0d05000 - 0xc0dcc000   ( 796 kB)
-      .data : 0xc0dcc000 - 0xc0ec97a0   (1014 kB)
-       .bss : 0xc0ec97a0 - 0xc0f188a8   ( 317 kB)
+      .text : 0xc0208000 - 0xc0d53f40   (11568 kB)
+      .init : 0xc0d54000 - 0xc0e20000   ( 816 kB)
+      .data : 0xc0e20000 - 0xc0f1f300   (1021 kB)
+       .bss : 0xc0f22000 - 0xc0f716a8   ( 318 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
 	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
 RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
 NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
 L2C: failed to init: -19
-sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
 Architected cp15 timer(s) running at 12.00MHz (virt).
-sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
+clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
 Switching to timer-based delay loop, resolution 83ns
 Console: colour dummy device 80x30
 Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000)
@@ -115,7 +119,7 @@
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x809682c8 - 0x80968360
+Setting up static identity map for 0x80209000 - 0x80209098
 Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 0
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
@@ -125,6 +129,7 @@
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
@@ -136,20 +141,12 @@
 Serial: AMBA PL011 UART driver
 dvdd_ts: Failed to request enable GPIO61: -517
 reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517
-platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral
 usb1_vbus: Failed to request enable GPIO108: -517
 reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
-platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
 usb2_vbus: Failed to request enable GPIO86: -517
 reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
-platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
-reg-fixed-voltage regulators:regulator@5: Failed to find supply vin
-reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
-platform regulators:regulator@5: Driver reg-fixed-voltage requests probe deferral
-platform regulators:regulator@6: Driver reg-fixed-voltage requests probe deferral
 VDD_5V0_HDMI_CON: Failed to request enable GPIO81: -517
 reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
-platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
 vgaarb: loaded
 SCSI subsystem initialized
 libata version 3.00 loaded.
@@ -157,38 +154,9 @@
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
 tps65090 2-0048: No cache defaults, reading back from HW
-vdd-sys-5v0: supplied by vdd_ac_bat
-vdd-sys-3v3: supplied by vdd_ac_bat
-vdd-ao: supplied by vdd_ac_bat
-vdd-lcd-bl: supplied by vdd_ac_bat
-TPS65090_RAILSFET2: supplied by vdd_ac_bat
-vdd-modem-3v3: supplied by vdd-sys-3v3
-avdd-lcd: supplied by vdd-sys-3v3
-vdd-lvds: supplied by vdd-sys-3v3
-vdd-sd-slot: supplied by vdd-sys-3v3
-vdd-com-3v3: supplied by vdd-sys-3v3
-vdd-sby-5v0: supplied by vdd_ac_bat
-vdd-sby-3v3: supplied by vdd_ac_bat
-genirq: Setting trigger mode 8 for irq 341 failed (gic_set_type+0x0/0xa4)
 palmas 2-0058: Irq flag is 0x00000000
 palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
-vddio-ddr: supplied by vdd-ao
-vddio-1v8: supplied by vdd-ao
-vdd-core: supplied by vdd-sys-3v3
-avdd-pll: supplied by vdd-sys-3v3
 sdhci-vdd-sd-slot: ramp_delay not set
-sdhci-vdd-sd-slot: supplied by vdd-sys-3v3
-avdd-cam1: supplied by vdd-sys-3v3
-avdd-cam2: supplied by vdd-sys-3v3
-avdd-dsi-csi: supplied by vddio-1v8
-vpp-fuse: supplied by vdd-sys-3v3
-LDO5: supplied by vdd_ac_bat
-vdd-sensor-2v85: supplied by vdd-sys-3v3
-vdd-af-cam1: supplied by vdd-sys-3v3
-vdd-rtc: supplied by vdd-ao
-vddio-sdmmc-2: supplied by sdhci-vdd-sd-slot
-hvdd-usb: supplied by vdd-sys-5v0
-avdd-usb: supplied by vdd-sys-5v0
 media: Linux media interface: v0.10
 Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
@@ -201,7 +169,6 @@
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
-TCP: reno registered
 UDP hash table entries: 512 (order: 2, 16384 bytes)
 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
 NET: Registered protocol family 1
@@ -215,12 +182,14 @@
 NFS: Registering the id_resolver key type
 Key type id_resolver registered
 Key type id_legacy registered
-ntfs: driver 2.1.31 [Flags: R/O].
+ntfs: driver 2.1.32 [Flags: R/O].
 bounce: pool size: 64 pages
 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
 io scheduler noop registered
 io scheduler deadline registered
 io scheduler cfq registered (default)
+vdd-lcd-bl: supplied by vdd_ac_bat
+tegra-ahb 6000c004.ahb: incorrect AHB base address in DT data - enabling workaround
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
@@ -231,8 +200,12 @@
 console [ttyS0] enabled
 STMicroelectronics ASC driver initialized
 [drm] Initialized drm 1.1.0 20060810
+vdd-ao: supplied by vdd_ac_bat
+vddio-1v8: supplied by vdd-ao
+avdd-dsi-csi: supplied by vddio-1v8
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
-platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+vdd-sys-3v3: supplied by vdd_ac_bat
+avdd-lcd: supplied by vdd-sys-3v3
 loop: module loaded
 m25p80 spi32766.0: w25q32dw (4096 Kbytes)
 CAN device driver interface
@@ -258,7 +231,6 @@
 ehci-st: EHCI STMicroelectronics driver
 ehci-exynos: EHCI EXYNOS driver
 tegra-ehci: Tegra EHCI driver
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 ohci-pci: OHCI PCI platform driver
 ohci-platform: OHCI generic platform driver
@@ -266,7 +238,6 @@
 SPEAr-ohci: OHCI SPEAr driver
 ohci-st: OHCI STMicroelectronics driver
 usbcore: registered new interface driver usb-storage
-platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
 mousedev: PS/2 mouse device common for all mice
 palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps659 as rtc0
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
@@ -277,7 +248,7 @@
 gspca_main: v2.14.0 registered
 sbs-battery 0-000b: sbs_probe: Failed to get device status
 sbs-battery: probe of 0-000b failed with error -121
-Driver 'mmcblk' needs updating - please use bus_type methods
+vdd-sensor-2v85: supplied by vdd-sys-3v3
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 Synopsys Designware Multimedia Card Interface Driver
@@ -306,7 +277,6 @@
 tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
 tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
 input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound/sound/card0/input0
-TCP: cubic registered
 NET: Registered protocol family 17
 can: controller area network core (rev 20120528 abi 9)
 NET: Registered protocol family 29
@@ -316,17 +286,16 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
-usb1_vbus: supplied by vdd-sys-5v0
-usb2_vbus: supplied by vdd-sys-5v0
-vdd_hdmi_5v0: supplied by vdd-sys-5v0
+vdd-sys-5v0: supplied by vdd_ac_bat
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
+vdd_hdmi_5v0: supplied by vdd-sys-5v0
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 Console: switching to colour frame buffer device 240x75
 drm drm: fb0:  frame buffer device
 drm drm: registered panic notifier
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+usb2_vbus: supplied by vdd-sys-5v0
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
@@ -334,7 +303,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-09-18 12:20:35 UTC (969279635)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-01 20:57:47 UTC (970433867)
 vdd_cam_1v8_reg: disabling
 usb1_vbus: disabling
 dvdd_ts: disabling
@@ -345,7 +314,7 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 796K (c0d05000 - c0dcc000)
+Freeing unused kernel memory: 816K (c0d54000 - c0e20000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.788809] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.618752] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2015-04-26 18:38:24.683525514 -0700
+++ /tmp/foob	2015-04-26 18:38:24.687525511 -0700
@@ -36,24 +36,24 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ####
-	 3 MiB/s
+	 ########
+	 3.1 MiB/s
 done
-Bytes transferred = 4828512 (49ad60 hex)
+Bytes transferred = 4882864 (4a81b0 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.8 MiB/s
+	 2.6 MiB/s
 done
-Bytes transferred = 34638 (874e hex)
+Bytes transferred = 34894 (884e hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x49ad60 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x4a81b0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff4000, end 8ffff74d ... OK
+   Loading Device Tree to 8fff4000, end 8ffff84d ... OK
 
 Starting kernel ...
 
@@ -61,28 +61,29 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 4.0.0-00776-g39a8804 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Apr 13 09:57:16 PDT 2015
+Linux version 4.1.0-rc1-12186-gb787f68 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Apr 26 18:33:40 PDT 2015
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
 debug: ignoring loglevel setting.
+earlycon: no match for ttyS0,115200n8
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0943cc0, node_mem_map ee7f7000
+free_area_init_node: node 0, pgdat c0962340, node_mem_map ee7f7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
   HighMem zone: 329472 pages, LIFO batch:31
-PERCPU: Embedded 11 pages/cpu @ee7a6000 s12672 r8192 d24192 u45056
-pcpu-alloc: s12672 r8192 d24192 u45056 alloc=11*4096
+PERCPU: Embedded 12 pages/cpu @ee7a2000 s17216 r8192 d23744 u49152
+pcpu-alloc: s17216 r8192 d23744 u49152 alloc=12*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2003204K/2096128K available (6614K kernel code, 317K rwdata, 2228K rodata, 300K init, 351K bss, 27388K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 2003060K/2096128K available (6696K kernel code, 311K rwdata, 2260K rodata, 312K init, 351K bss, 27532K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -90,18 +91,21 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc08aac98   (8844 kB)
-      .init : 0xc08ab000 - 0xc08f6000   ( 300 kB)
-      .data : 0xc08f6000 - 0xc09457a0   ( 318 kB)
-       .bss : 0xc09457a0 - 0xc099d3f0   ( 352 kB)
+      .text : 0xc0008000 - 0xc08c7554   (8958 kB)
+      .init : 0xc08c8000 - 0xc0916000   ( 312 kB)
+      .data : 0xc0916000 - 0xc0963ec0   ( 312 kB)
+       .bss : 0xc0966000 - 0xc09bde94   ( 352 kB)
 Preemptible hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
 NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
 L2C: failed to init: -19
-sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
 Architected cp15 timer(s) running at 12.00MHz (virt).
-sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
+clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
 Switching to timer-based delay loop, resolution 83ns
 Console: colour dummy device 80x30
 Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
@@ -116,7 +120,7 @@
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x80644a58 - 0x80644af0
+Setting up static identity map for 0x80008440 - 0x800084d8
 Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 0
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
@@ -126,6 +130,7 @@
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
@@ -136,20 +141,12 @@
 hw-breakpoint: maximum watchpoint size is 8 bytes.
 dvdd_ts: Failed to request enable GPIO61: -517
 reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517
-platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral
 usb1_vbus: Failed to request enable GPIO108: -517
 reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
-platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
 usb2_vbus: Failed to request enable GPIO86: -517
 reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
-platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
-reg-fixed-voltage regulators:regulator@5: Failed to find supply vin
-reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
-platform regulators:regulator@5: Driver reg-fixed-voltage requests probe deferral
-platform regulators:regulator@6: Driver reg-fixed-voltage requests probe deferral
 VDD_5V0_HDMI_CON: Failed to request enable GPIO81: -517
 reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
-platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
 vgaarb: loaded
 SCSI subsystem initialized
 libata version 3.00 loaded.
@@ -157,38 +154,9 @@
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
 tps65090 2-0048: No cache defaults, reading back from HW
-vdd-sys-5v0: supplied by vdd_ac_bat
-vdd-sys-3v3: supplied by vdd_ac_bat
-vdd-ao: supplied by vdd_ac_bat
-vdd-lcd-bl: supplied by vdd_ac_bat
-TPS65090_RAILSFET2: supplied by vdd_ac_bat
-vdd-modem-3v3: supplied by vdd-sys-3v3
-avdd-lcd: supplied by vdd-sys-3v3
-vdd-lvds: supplied by vdd-sys-3v3
-vdd-sd-slot: supplied by vdd-sys-3v3
-vdd-com-3v3: supplied by vdd-sys-3v3
-vdd-sby-5v0: supplied by vdd_ac_bat
-vdd-sby-3v3: supplied by vdd_ac_bat
-genirq: Setting trigger mode 8 for irq 341 failed (gic_set_type+0x0/0x9c)
 palmas 2-0058: Irq flag is 0x00000000
 palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
-vddio-ddr: supplied by vdd-ao
-vddio-1v8: supplied by vdd-ao
-vdd-core: supplied by vdd-sys-3v3
-avdd-pll: supplied by vdd-sys-3v3
 sdhci-vdd-sd-slot: ramp_delay not set
-sdhci-vdd-sd-slot: supplied by vdd-sys-3v3
-avdd-cam1: supplied by vdd-sys-3v3
-avdd-cam2: supplied by vdd-sys-3v3
-avdd-dsi-csi: supplied by vddio-1v8
-vpp-fuse: supplied by vdd-sys-3v3
-LDO5: supplied by vdd_ac_bat
-vdd-sensor-2v85: supplied by vdd-sys-3v3
-vdd-af-cam1: supplied by vdd-sys-3v3
-vdd-rtc: supplied by vdd-ao
-vddio-sdmmc-2: supplied by sdhci-vdd-sd-slot
-hvdd-usb: supplied by vdd-sys-5v0
-avdd-usb: supplied by vdd-sys-5v0
 Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
@@ -206,7 +174,6 @@
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
-TCP: reno registered
 UDP hash table entries: 512 (order: 2, 16384 bytes)
 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
 NET: Registered protocol family 1
@@ -219,6 +186,8 @@
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 bounce: pool size: 64 pages
 io scheduler noop registered (default)
+vdd-lcd-bl: supplied by vdd_ac_bat
+tegra-ahb 6000c004.ahb: incorrect AHB base address in DT data - enabling workaround
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
@@ -226,8 +195,12 @@
 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 329, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
 [drm] Initialized drm 1.1.0 20060810
+vdd-ao: supplied by vdd_ac_bat
+vddio-1v8: supplied by vdd-ao
+avdd-dsi-csi: supplied by vddio-1v8
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
-platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+vdd-sys-3v3: supplied by vdd_ac_bat
+avdd-lcd: supplied by vdd-sys-3v3
 loop: module loaded
 m25p80 spi32766.0: w25q32dw (4096 Kbytes)
 CAN device driver interface
@@ -247,12 +220,10 @@
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-pci: EHCI PCI platform driver
 tegra-ehci: Tegra EHCI driver
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
 usbcore: registered new interface driver cdc_acm
 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 usbcore: registered new interface driver cdc_wdm
 usbcore: registered new interface driver usb-storage
-platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
 mousedev: PS/2 mouse device common for all mice
 palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps659 as rtc0
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
@@ -263,7 +234,7 @@
 gspca_main: v2.14.0 registered
 sbs-battery 0-000b: sbs_probe: Failed to get device status
 sbs-battery: probe of 0-000b failed with error -121
-Driver 'mmcblk' needs updating - please use bus_type methods
+vdd-sensor-2v85: supplied by vdd-sys-3v3
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
@@ -289,7 +260,6 @@
 tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
 tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
 input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound/sound/card0/input0
-TCP: cubic registered
 NET: Registered protocol family 10
 mip6: Mobile IPv6
 sit: IPv6 over IPv4 tunneling driver
@@ -307,17 +277,16 @@
 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
 Bluetooth: HIDP socket layer initialized
 Registering SWP/SWPB emulation handler
-usb1_vbus: supplied by vdd-sys-5v0
-usb2_vbus: supplied by vdd-sys-5v0
-vdd_hdmi_5v0: supplied by vdd-sys-5v0
+vdd-sys-5v0: supplied by vdd_ac_bat
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
+vdd_hdmi_5v0: supplied by vdd-sys-5v0
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 Console: switching to colour frame buffer device 240x75
 drm drm: fb0:  frame buffer device
 drm drm: registered panic notifier
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+usb2_vbus: supplied by vdd-sys-5v0
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
@@ -325,7 +294,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-09-18 12:21:55 UTC (969279715)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-10-01 20:58:18 UTC (970433898)
 vdd_cam_1v8_reg: disabling
 usb1_vbus: disabling
 dvdd_ts: disabling
@@ -337,7 +306,7 @@
 EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 300K (c08ab000 - c08f6000)
+Freeing unused kernel memory: 312K (c08c8000 - c0916000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.939974] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.789707] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2015-04-26 18:38:24.691525509 -0700
+++ /tmp/foob	2015-04-26 18:38:24.695525507 -0700
@@ -39,50 +39,51 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #########################
+	 ###################################
 	 3.2 MiB/s
 done
-Bytes transferred = 6082800 (5cd0f0 hex)
+Bytes transferred = 6227624 (5f06a8 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x82000000 tegra124-jetson-tk1.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x82000000
-Loading: *####
-	 2.8 MiB/s
+Loading: *#####
+	 3.2 MiB/s
 done
-Bytes transferred = 49059 (bfa3 hex)
+Bytes transferred = 63003 (f61b hex)
 Tegra124 (Jetson TK1) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5cd0f0 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5f06a8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Using Device Tree in place at 82000000, end 8200efa2
+   Using Device Tree in place at 82000000, end 8201261a
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.0.0-00776-g39a8804 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Apr 13 09:56:56 PDT 2015
+Linux version 4.1.0-rc1-12186-gb787f68 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Apr 26 18:33:34 PDT 2015
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra124 Jetson TK1
 debug: ignoring loglevel setting.
+earlycon: no match for ttyS0,115200n8
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0ec7880, node_mem_map ee7f8000
+free_area_init_node: node 0, pgdat c0f1d340, node_mem_map ee7f8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
   HighMem zone: 329472 pages, LIFO batch:31
-PERCPU: Embedded 11 pages/cpu @ee79a000 s12480 r8192 d24384 u45056
-pcpu-alloc: s12480 r8192 d24384 u45056 alloc=11*4096
+PERCPU: Embedded 12 pages/cpu @ee790000 s16960 r8192 d24000 u49152
+pcpu-alloc: s16960 r8192 d24000 u49152 alloc=12*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999580K/2096128K available (7834K kernel code, 1013K rwdata, 3412K rodata, 796K init, 316K bss, 31012K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 1999172K/2096128K available (7987K kernel code, 1020K rwdata, 3576K rodata, 816K init, 317K bss, 31420K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -90,21 +91,24 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0d04b40   (11251 kB)
-      .init : 0xc0d05000 - 0xc0dcc000   ( 796 kB)
-      .data : 0xc0dcc000 - 0xc0ec97a0   (1014 kB)
-       .bss : 0xc0ec97a0 - 0xc0f188a8   ( 317 kB)
+      .text : 0xc0208000 - 0xc0d53f40   (11568 kB)
+      .init : 0xc0d54000 - 0xc0e20000   ( 816 kB)
+      .data : 0xc0e20000 - 0xc0f1f300   (1021 kB)
+       .bss : 0xc0f22000 - 0xc0f716a8   ( 318 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
 	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
 RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
 NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000
 L2C: failed to init: -19
-sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
 Architected cp15 timer(s) running at 12.00MHz (virt).
-sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
+clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
 Switching to timer-based delay loop, resolution 83ns
 Console: colour dummy device 80x30
 Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000)
@@ -117,7 +121,7 @@
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x809682c8 - 0x80968360
+Setting up static identity map for 0x80209000 - 0x80209098
 Tegra Revision: A01 SKU: 129 CPU Process: 1 Core Process: 1
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
@@ -127,6 +131,7 @@
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
@@ -136,31 +141,18 @@
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 8 bytes.
 Serial: AMBA PL011 UART driver
-+5V_SYS: supplied by +VDD_MUX
-+3.3V_SYS: supplied by +VDD_MUX
-platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
-reg-fixed-voltage regulators:regulator@4: Failed to find supply vin
-reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
-platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
 +USB0_VBUS_SW: Failed to request enable GPIO108: -517
 reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
-platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
 +5V_USB_HS: Failed to request enable GPIO109: -517
 reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
-platform regulators:regulator@8: Driver reg-fixed-voltage requests probe deferral
-platform regulators:regulator@10: Driver reg-fixed-voltage requests probe deferral
 +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517
 reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
-platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral
 +5V_HDMI_CON: Failed to request enable GPIO86: -517
 reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517
-platform regulators:regulator@12: Driver reg-fixed-voltage requests probe deferral
 +5V_SATA: Failed to request enable GPIO242: -517
 reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517
-platform regulators:regulator@13: Driver reg-fixed-voltage requests probe deferral
 +12V_SATA: Failed to request enable GPIO242: -517
 reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517
-platform regulators:regulator@14: Driver reg-fixed-voltage requests probe deferral
 vgaarb: loaded
 SCSI subsystem initialized
 libata version 3.00 loaded.
@@ -179,7 +171,6 @@
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
-TCP: reno registered
 UDP hash table entries: 512 (order: 2, 16384 bytes)
 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
 NET: Registered protocol family 1
@@ -193,7 +184,7 @@
 NFS: Registering the id_resolver key type
 Key type id_resolver registered
 Key type id_legacy registered
-ntfs: driver 2.1.31 [Flags: R/O].
+ntfs: driver 2.1.32 [Flags: R/O].
 bounce: pool size: 64 pages
 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
 io scheduler noop registered
@@ -201,33 +192,24 @@
 io scheduler cfq registered (default)
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
-platform 1003000.pcie-controller: Driver tegra-pcie requests probe deferral
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: emergency thermal reset enabled
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
 SuperH (H)SCI(F) driver initialized
 msm_serial: driver initialized
 console [ttyS0] disabled
-70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 330, base_baud = 25500000) is a Tegra
+70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 331, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
 STMicroelectronics ASC driver initialized
 [drm] Initialized drm 1.1.0 20060810
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
-platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
 loop: module loaded
 at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
 as3722 4-0040: AS3722 with revision 0x1 found
-+1.35V_LP0(sd2): supplied by +5V_SYS
-+1.35V_LP0(sd3): supplied by +5V_SYS
++5V_SYS: supplied by +VDD_MUX
 +1.05V_RUN: supplied by +5V_SYS
-+1.8V_VDDIO: supplied by +5V_SYS
-+1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
-as3722-regulator as3722-regulator: Failed to find supply vin-ldo1-6
-as3722-regulator as3722-regulator: regulator 8 register failed -517
-platform as3722-regulator: Driver as3722-regulator requests probe deferral
-tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
+tegra-ahci 70027000.sata: Failed to get supply 'hvdd': -517
 tegra-ahci 70027000.sata: Failed to get regulators
-platform 70027000.sata: Driver tegra-ahci requests probe deferral
 m25p80 spi32765.0: w25q32dw (4096 Kbytes)
 CAN device driver interface
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
@@ -243,6 +225,7 @@
 usbcore: registered new interface driver cdc_subset
 usbcore: registered new interface driver zaurus
 usbcore: registered new interface driver cdc_ncm
+tegra-phy 7d004000.usb-phy: no vbus regulator
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-pci: EHCI PCI platform driver
 ehci-platform: EHCI generic platform driver
@@ -252,8 +235,12 @@
 ehci-st: EHCI STMicroelectronics driver
 ehci-exynos: EHCI EXYNOS driver
 tegra-ehci: Tegra EHCI driver
-platform 7d004000.usb: Driver tegra-ehci requests probe deferral
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+tegra-ehci 7d004000.usb: EHCI Host Controller
+tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d004000.usb: irq 346, io mem 0x7d004000
+tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 ohci-pci: OHCI PCI platform driver
 ohci-platform: OHCI generic platform driver
@@ -261,11 +248,9 @@
 SPEAr-ohci: OHCI SPEAr driver
 ohci-st: OHCI STMicroelectronics driver
 usbcore: registered new interface driver usb-storage
-tegra-phy 7d004000.usb-phy: no vbus regulator
-platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
 mousedev: PS/2 mouse device common for all mice
 as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
-as3722-rtc as3722-rtc: RTC interrupt 364
+as3722-rtc as3722-rtc: RTC interrupt 365
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 i2c /dev entries driver
@@ -273,7 +258,6 @@
 USB Video Class driver (1.1.1)
 gspca_main: v2.14.0 registered
 0-004c supply vcc not found, using dummy regulator
-Driver 'mmcblk' needs updating - please use bus_type methods
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 Synopsys Designware Multimedia Card Interface Driver
@@ -281,8 +265,8 @@
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc0: Unknown controller version (3). You may experience problems.
+as3722-regulator as3722-regulator: Failed to resolve vin-ldo1-6-supply for as3722-ldo6
 sdhci-tegra 700b0400.sdhci: No vmmc regulator found
-platform 700b0400.sdhci: Driver sdhci-tegra requests probe deferral
 mmc0: Unknown controller version (3). You may experience problems.
 sdhci-tegra 700b0600.sdhci: No vmmc regulator found
 sdhci-tegra 700b0600.sdhci: No vqmmc regulator found
@@ -303,7 +287,6 @@
 tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
 tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok
 input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card0/input0
-TCP: cubic registered
 NET: Registered protocol family 17
 can: controller area network core (rev 20120528 abi 9)
 NET: Registered protocol family 29
@@ -313,61 +296,13 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
-+3.3V_RUN: supplied by +3.3V_SYS
-+3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
-+USB0_VBUS_SW: supplied by +5V_SYS
-+5V_USB_HS: supplied by +5V_SYS
-+3.3V_LP0: supplied by +3.3V_SYS
-reg-fixed-voltage regulators:regulator@11: Failed to find supply vin
-reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
-platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral
-+5V_HDMI_CON: supplied by +5V_SYS
-+5V_SATA: supplied by +5V_SYS
-+12V_SATA: supplied by +VDD_MUX
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
-tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
-platform 1003000.pcie-controller: Driver tegra-pcie requests probe deferral
-tegra-hdmi 54280000.hdmi: failed to get PLL regulator
-platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
++3.3V_SYS: supplied by +VDD_MUX
++3.3V_LP0: supplied by +3.3V_SYS
 +1.35V_LP0(sd2): supplied by +5V_SYS
-+1.35V_LP0(sd3): supplied by +5V_SYS
-+1.05V_RUN: supplied by +5V_SYS
-+1.8V_VDDIO: supplied by +5V_SYS
 +1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
-+1.8V_RUN_CAM: supplied by +3.3V_RUN
-+1.2V_GEN_AVDD: supplied by +1.8V_VDDIO
-+1.05V_LP0_VDD_RTC: supplied by +3.3V_SYS
-+2.8V_RUN_CAM: supplied by +3.3V_SYS
-+1.2V_RUN_CAM_FRONT: supplied by +1.8V_VDDIO
-+VDDIO_SDMMC3: supplied by +3.3V_RUN
-+1.05V_RUN_CAM_REAR: supplied by +1.8V_VDDIO
-+3.3V_RUN_TOUCH: supplied by +5V_SYS
-+2.8V_RUN_CAM_AF: supplied by +5V_SYS
-+1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
-tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
-tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
-scsi host0: tegra-ahci
-scsi host1: tegra-ahci
-ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 340
-ata2: DUMMY
-tegra-ehci 7d004000.usb: EHCI Host Controller
-tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d004000.usb: irq 345, io mem 0x7d004000
-tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
-mmc1: Unknown controller version (3). You may experience problems.
-sdhci-tegra 700b0400.sdhci: No vmmc regulator found
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
-+1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
-tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
-ata1: SATA link down (SStatus 0 SControl 300)
 tegra-pcie 1003000.pcie-controller: link 0 down, retrying
 tegra-pcie 1003000.pcie-controller: link 0 down, retrying
 tegra-pcie 1003000.pcie-controller: link 0 down, retrying
@@ -384,6 +319,10 @@
 pci_bus 0000:00: root bus resource [bus 00-ff]
 pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
 PCI: bus0: Fast back to back transfers enabled
++5V_HDMI_CON: supplied by +5V_SYS
++1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
++3.3V_RUN: supplied by +3.3V_SYS
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 tegra-hdmi 54280000.hdmi: cannot set audio to 44100 at 297000000 pclk
@@ -391,14 +330,31 @@
 drm drm: fb0:  frame buffer device
 drm drm: registered panic notifier
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
++5V_SATA: supplied by +5V_SYS
++12V_SATA: supplied by +VDD_MUX
+tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
+tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
+scsi host0: tegra-ahci
+scsi host1: tegra-ahci
+ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 341
+ata2: DUMMY
++5V_USB_HS: supplied by +5V_SYS
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci 7d008000.usb: irq 346, io mem 0x7d008000
+tegra-ehci 7d008000.usb: irq 347, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc1: Unknown controller version (3). You may experience problems.
++VDDIO_SDMMC3: supplied by +3.3V_RUN
+sdhci-tegra 700b0400.sdhci: No vmmc regulator found
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:19 UTC (949363219)
+as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218)
++USB0_VBUS_SW: disabling
 +1.8V_RUN_VPP_FUSE: disabling
 +2.8V_RUN_CAM_AF: disabling
 +3.3V_RUN_TOUCH: disabling
@@ -406,16 +362,17 @@
 +1.2V_RUN_CAM_FRONT: disabling
 +2.8V_RUN_CAM: disabling
 +1.8V_RUN_CAM: disabling
-+USB0_VBUS_SW: disabling
 ALSA device list:
   #0: NVIDIA Tegra Jetson TK1
+ata1: SATA link down (SStatus 0 SControl 300)
 EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
 EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
+usb 2-1: new high-speed USB device number 2 using tegra-ehci
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 796K (c0d05000 - c0dcc000)
+Freeing unused kernel memory: 816K (c0d54000 - c0e20000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    5.935694] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2015-04-26 18:38:24.699525504 -0700
+++ /tmp/foob	2015-04-26 18:38:24.703525502 -0700
@@ -38,24 +38,24 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ####
-	 2.9 MiB/s
+	 ########
+	 3.4 MiB/s
 done
-Bytes transferred = 4828512 (49ad60 hex)
+Bytes transferred = 4882864 (4a81b0 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x82000000 tegra124-jetson-tk1.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x82000000
-Loading: *####
-	 2.9 MiB/s
+Loading: *#####
+	 3.3 MiB/s
 done
-Bytes transferred = 49059 (bfa3 hex)
+Bytes transferred = 63003 (f61b hex)
 Tegra124 (Jetson TK1) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x49ad60 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x4a81b0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Using Device Tree in place at 82000000, end 8200efa2
+   Using Device Tree in place at 82000000, end 8201261a
 
 Starting kernel ...
 
@@ -63,28 +63,29 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 4.0.0-00776-g39a8804 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Apr 13 09:57:16 PDT 2015
+Linux version 4.1.0-rc1-12186-gb787f68 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Apr 26 18:33:40 PDT 2015
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra124 Jetson TK1
 debug: ignoring loglevel setting.
+earlycon: no match for ttyS0,115200n8
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0943cc0, node_mem_map ee7f7000
+free_area_init_node: node 0, pgdat c0962340, node_mem_map ee7f7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
   HighMem zone: 329472 pages, LIFO batch:31
-PERCPU: Embedded 11 pages/cpu @ee799000 s12672 r8192 d24192 u45056
-pcpu-alloc: s12672 r8192 d24192 u45056 alloc=11*4096
+PERCPU: Embedded 12 pages/cpu @ee78f000 s17216 r8192 d23744 u49152
+pcpu-alloc: s17216 r8192 d23744 u49152 alloc=12*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2003136K/2096128K available (6614K kernel code, 317K rwdata, 2228K rodata, 300K init, 351K bss, 27456K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 2002956K/2096128K available (6696K kernel code, 311K rwdata, 2260K rodata, 312K init, 351K bss, 27636K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -92,18 +93,21 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc08aac98   (8844 kB)
-      .init : 0xc08ab000 - 0xc08f6000   ( 300 kB)
-      .data : 0xc08f6000 - 0xc09457a0   ( 318 kB)
-       .bss : 0xc09457a0 - 0xc099d3f0   ( 352 kB)
+      .text : 0xc0008000 - 0xc08c7554   (8958 kB)
+      .init : 0xc08c8000 - 0xc0916000   ( 312 kB)
+      .data : 0xc0916000 - 0xc0963ec0   ( 312 kB)
+       .bss : 0xc0966000 - 0xc09bde94   ( 352 kB)
 Preemptible hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
 NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@0,50041000
 L2C: failed to init: -19
-sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
 Architected cp15 timer(s) running at 12.00MHz (virt).
-sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
+clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 4398046511096ns
 Switching to timer-based delay loop, resolution 83ns
 Console: colour dummy device 80x30
 Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
@@ -118,7 +122,7 @@
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x80644a58 - 0x80644af0
+Setting up static identity map for 0x80008440 - 0x800084d8
 Tegra Revision: A01 SKU: 129 CPU Process: 1 Core Process: 1
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
@@ -128,6 +132,7 @@
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
@@ -136,31 +141,18 @@
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 8 bytes.
-+5V_SYS: supplied by +VDD_MUX
-+3.3V_SYS: supplied by +VDD_MUX
-platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
-reg-fixed-voltage regulators:regulator@4: Failed to find supply vin
-reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
-platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
 +USB0_VBUS_SW: Failed to request enable GPIO108: -517
 reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
-platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
 +5V_USB_HS: Failed to request enable GPIO109: -517
 reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
-platform regulators:regulator@8: Driver reg-fixed-voltage requests probe deferral
-platform regulators:regulator@10: Driver reg-fixed-voltage requests probe deferral
 +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517
 reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
-platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral
 +5V_HDMI_CON: Failed to request enable GPIO86: -517
 reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517
-platform regulators:regulator@12: Driver reg-fixed-voltage requests probe deferral
 +5V_SATA: Failed to request enable GPIO242: -517
 reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517
-platform regulators:regulator@13: Driver reg-fixed-voltage requests probe deferral
 +12V_SATA: Failed to request enable GPIO242: -517
 reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517
-platform regulators:regulator@14: Driver reg-fixed-voltage requests probe deferral
 vgaarb: loaded
 SCSI subsystem initialized
 libata version 3.00 loaded.
@@ -184,7 +176,6 @@
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
-TCP: reno registered
 UDP hash table entries: 512 (order: 2, 16384 bytes)
 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
 NET: Registered protocol family 1
@@ -199,30 +190,21 @@
 io scheduler noop registered (default)
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
-platform 1003000.pcie-controller: Driver tegra-pcie requests probe deferral
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: emergency thermal reset enabled
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
 console [ttyS0] disabled
-70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 330, base_baud = 25500000) is a Tegra
+70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 331, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
 [drm] Initialized drm 1.1.0 20060810
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
-platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
 loop: module loaded
 at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
 as3722 4-0040: AS3722 with revision 0x1 found
-+1.35V_LP0(sd2): supplied by +5V_SYS
-+1.35V_LP0(sd3): supplied by +5V_SYS
++5V_SYS: supplied by +VDD_MUX
 +1.05V_RUN: supplied by +5V_SYS
-+1.8V_VDDIO: supplied by +5V_SYS
-+1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
-as3722-regulator as3722-regulator: Failed to find supply vin-ldo1-6
-as3722-regulator as3722-regulator: regulator 8 register failed -517
-platform as3722-regulator: Driver as3722-regulator requests probe deferral
-tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
+tegra-ahci 70027000.sata: Failed to get supply 'hvdd': -517
 tegra-ahci 70027000.sata: Failed to get regulators
-platform 70027000.sata: Driver tegra-ahci requests probe deferral
 m25p80 spi32765.0: w25q32dw (4096 Kbytes)
 CAN device driver interface
 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
@@ -238,20 +220,23 @@
 usbcore: registered new interface driver cdc_subset
 usbcore: registered new interface driver zaurus
 usbcore: registered new interface driver cdc_ncm
+tegra-phy 7d004000.usb-phy: no vbus regulator
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-pci: EHCI PCI platform driver
 tegra-ehci: Tegra EHCI driver
-platform 7d004000.usb: Driver tegra-ehci requests probe deferral
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+tegra-ehci 7d004000.usb: EHCI Host Controller
+tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d004000.usb: irq 346, io mem 0x7d004000
+tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
 usbcore: registered new interface driver cdc_acm
 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 usbcore: registered new interface driver cdc_wdm
 usbcore: registered new interface driver usb-storage
-tegra-phy 7d004000.usb-phy: no vbus regulator
-platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
 mousedev: PS/2 mouse device common for all mice
 as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
-as3722-rtc as3722-rtc: RTC interrupt 364
+as3722-rtc as3722-rtc: RTC interrupt 365
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 i2c /dev entries driver
@@ -259,15 +244,14 @@
 USB Video Class driver (1.1.1)
 gspca_main: v2.14.0 registered
 0-004c supply vcc not found, using dummy regulator
-Driver 'mmcblk' needs updating - please use bus_type methods
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc0: Unknown controller version (3). You may experience problems.
+as3722-regulator as3722-regulator: Failed to resolve vin-ldo1-6-supply for as3722-ldo6
 sdhci-tegra 700b0400.sdhci: No vmmc regulator found
-platform 700b0400.sdhci: Driver sdhci-tegra requests probe deferral
 mmc0: Unknown controller version (3). You may experience problems.
 sdhci-tegra 700b0600.sdhci: No vmmc regulator found
 sdhci-tegra 700b0600.sdhci: No vqmmc regulator found
@@ -286,7 +270,6 @@
 tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
 tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok
 input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card0/input0
-TCP: cubic registered
 NET: Registered protocol family 10
 mip6: Mobile IPv6
 sit: IPv6 over IPv4 tunneling driver
@@ -304,77 +287,62 @@
 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
 Bluetooth: HIDP socket layer initialized
 Registering SWP/SWPB emulation handler
-+3.3V_RUN: supplied by +3.3V_SYS
-+3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
-+USB0_VBUS_SW: supplied by +5V_SYS
-+5V_USB_HS: supplied by +5V_SYS
-+3.3V_LP0: supplied by +3.3V_SYS
-reg-fixed-voltage regulators:regulator@11: Failed to find supply vin
-reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
-platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral
-+5V_HDMI_CON: supplied by +5V_SYS
-+5V_SATA: supplied by +5V_SYS
-+12V_SATA: supplied by +VDD_MUX
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
-tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
-platform 1003000.pcie-controller: Driver tegra-pcie requests probe deferral
-tegra-hdmi 54280000.hdmi: failed to get PLL regulator
-platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
++3.3V_SYS: supplied by +VDD_MUX
++3.3V_LP0: supplied by +3.3V_SYS
 +1.35V_LP0(sd2): supplied by +5V_SYS
-+1.35V_LP0(sd3): supplied by +5V_SYS
-+1.05V_RUN: supplied by +5V_SYS
-+1.8V_VDDIO: supplied by +5V_SYS
 +1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
-+1.8V_RUN_CAM: supplied by +3.3V_RUN
-+1.2V_GEN_AVDD: supplied by +1.8V_VDDIO
-+1.05V_LP0_VDD_RTC: supplied by +3.3V_SYS
-+2.8V_RUN_CAM: supplied by +3.3V_SYS
-+1.2V_RUN_CAM_FRONT: supplied by +1.8V_VDDIO
-+VDDIO_SDMMC3: supplied by +3.3V_RUN
-+1.05V_RUN_CAM_REAR: supplied by +1.8V_VDDIO
-+3.3V_RUN_TOUCH: supplied by +5V_SYS
-+2.8V_RUN_CAM_AF: supplied by +5V_SYS
-+1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
-tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
-tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
-scsi host0: tegra-ahci
-scsi host1: tegra-ahci
-ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 340
-ata2: DUMMY
-tegra-ehci 7d004000.usb: EHCI Host Controller
-tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d004000.usb: irq 345, io mem 0x7d004000
-tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
-sdhci-tegra 700b0400.sdhci: Got CD GPIO
-sdhci-tegra 700b0400.sdhci: Got WP GPIO
-mmc1: Unknown controller version (3). You may experience problems.
-sdhci-tegra 700b0400.sdhci: No vmmc regulator found
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
-+1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
-tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
-ata1: SATA link down (SStatus 0 SControl 300)
 tegra-pcie 1003000.pcie-controller: link 0 down, retrying
 tegra-pcie 1003000.pcie-controller: link 0 down, retrying
+cfg80211: Calling CRDA to update world regulatory domain
 tegra-pcie 1003000.pcie-controller: link 0 down, retrying
 tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
 tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
-tegra-pcie 1003000.pcie-controller: link 1 down, retrying
-tegra-pcie 1003000.pcie-controller: link 1 down, retrying
-tegra-pcie 1003000.pcie-controller: link 1 down, retrying
-tegra-pcie 1003000.pcie-controller: link 1 down, ignoring
 tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
 pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
 pci_bus 0000:00: root bus resource [bus 00-ff]
 pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
-PCI: bus0: Fast back to back transfers enabled
+pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
+pci 0000:00:02.0: IOMMU is currently not supported for PCI
+pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
+PCI: bus0: Fast back to back transfers disabled
+pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
+pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
+pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
+pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:01:00.0: IOMMU is currently not supported for PCI
+pci 0000:01:00.0: supports D1 D2
+pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+PCI: bus1: Fast back to back transfers disabled
+pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
+pci 0000:00:02.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
+pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
+pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
+pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
+pci 0000:01:00.0: BAR 2: assigned [mem 0x13000000-0x13000fff 64bit]
+pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
+pci 0000:00:02.0: PCI bridge to [bus 01]
+pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
+pci 0000:00:02.0:   bridge window [mem 0x13000000-0x130fffff]
+pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
+pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:02.0: enabling device (0140 -> 0143)
+pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
+pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
+pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
+r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
+r8169 0000:01:00.0: enabling device (0140 -> 0143)
+r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xf00e0000, 00:04:4b:25:b3:b4, XID 0c000800 IRQ 382
+r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
++5V_HDMI_CON: supplied by +5V_SYS
++1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
++3.3V_RUN: supplied by +3.3V_SYS
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 tegra-hdmi 54280000.hdmi: cannot set audio to 44100 at 297000000 pclk
@@ -382,14 +350,31 @@
 drm drm: fb0:  frame buffer device
 drm drm: registered panic notifier
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
++5V_SATA: supplied by +5V_SYS
++12V_SATA: supplied by +VDD_MUX
+tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
+tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
+scsi host0: tegra-ahci
+scsi host1: tegra-ahci
+ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 341
+ata2: DUMMY
++5V_USB_HS: supplied by +5V_SYS
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci 7d008000.usb: irq 346, io mem 0x7d008000
+tegra-ehci 7d008000.usb: irq 347, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc1: Unknown controller version (3). You may experience problems.
++VDDIO_SDMMC3: supplied by +3.3V_RUN
+sdhci-tegra 700b0400.sdhci: No vmmc regulator found
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218)
+as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:49 UTC (949363249)
++USB0_VBUS_SW: disabling
 +1.8V_RUN_VPP_FUSE: disabling
 +2.8V_RUN_CAM_AF: disabling
 +3.3V_RUN_TOUCH: disabling
@@ -397,17 +382,17 @@
 +1.2V_RUN_CAM_FRONT: disabling
 +2.8V_RUN_CAM: disabling
 +1.8V_RUN_CAM: disabling
-+USB0_VBUS_SW: disabling
 ALSA device list:
   #0: NVIDIA Tegra Jetson TK1
+ata1: SATA link down (SStatus 0 SControl 300)
 EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
+usb 2-1: new high-speed USB device number 2 using tegra-ehci
 EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (244)
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 300K (c08ab000 - c08f6000)
+Freeing unused kernel memory: 312K (c08c8000 - c0916000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-usb 2-1: new high-speed USB device number 2 using tegra-ehci
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra20-trimslice/tegra20-trimslice/multi_v7_defconfig_log.txt
--- /tmp/fooa	2015-04-26 18:38:24.711525498 -0700
+++ /tmp/foob	2015-04-26 18:38:24.711525498 -0700
@@ -43,50 +43,51 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #########################
+	 ###################################
 	 3.9 MiB/s
 done
-Bytes transferred = 6082800 (5cd0f0 hex)
+Bytes transferred = 6227624 (5f06a8 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 4 MiB/s
+	 3.4 MiB/s
 done
-Bytes transferred = 20902 (51a6 hex)
+Bytes transferred = 21130 (528a hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x5cd0f0 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x5f06a8 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
-   Using Device Tree in place at 02408000, end 024101a5
+   Using Device Tree in place at 02408000, end 02410289
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.0.0-00776-g39a8804 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Apr 13 09:56:56 PDT 2015
+Linux version 4.1.0-rc1-12186-gb787f68 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Apr 26 18:33:34 PDT 2015
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: Compulab TrimSlice board
 debug: ignoring loglevel setting.
+earlycon: no match for ttyS0,115200n8
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0ec7880, node_mem_map eeff8000
+free_area_init_node: node 0, pgdat c0f1d340, node_mem_map eeff8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
   HighMem zone: 67584 pages, LIFO batch:15
-PERCPU: Embedded 11 pages/cpu @eefcc000 s12480 r8192 d24384 u45056
-pcpu-alloc: s12480 r8192 d24384 u45056 alloc=11*4096
+PERCPU: Embedded 12 pages/cpu @eefca000 s16960 r8192 d24000 u49152
+pcpu-alloc: s16960 r8192 d24000 u49152 alloc=12*4096
 pcpu-alloc: [0] 0 [0] 1 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260624
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 960448K/1048576K available (7834K kernel code, 1013K rwdata, 3412K rodata, 796K init, 316K bss, 22592K reserved, 65536K cma-reserved, 204800K highmem)
+Memory: 960084K/1048576K available (7987K kernel code, 1020K rwdata, 3576K rodata, 816K init, 317K bss, 22956K reserved, 65536K cma-reserved, 204800K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -94,16 +95,17 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0d04b40   (11251 kB)
-      .init : 0xc0d05000 - 0xc0dcc000   ( 796 kB)
-      .data : 0xc0dcc000 - 0xc0ec97a0   (1014 kB)
-       .bss : 0xc0ec97a0 - 0xc0f188a8   ( 317 kB)
+      .text : 0xc0208000 - 0xc0d53f40   (11568 kB)
+      .init : 0xc0d54000 - 0xc0e20000   ( 816 kB)
+      .data : 0xc0e20000 - 0xc0f1f300   (1021 kB)
+       .bss : 0xc0f22000 - 0xc0f716a8   ( 318 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
 Hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
 	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2.
 RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
 NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 128 interrupts forwarded to /interrupt-controller@50041000
 L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
 L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
 L2C-310 errata 727915 769419 enabled
@@ -112,7 +114,8 @@
 L2C-310 ID prefetch enabled, offset 1 lines
 L2C-310 cache controller enabled, 8 ways, 1024 kB
 L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e480001
-sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
 Console: colour dummy device 80x30
 Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=5000)
@@ -121,7 +124,7 @@
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x9682c8 - 0x968360
+Setting up static identity map for 0x209000 - 0x209098
 Tegra Revision: A03 prime SKU: 8 CPU Process: 1 Core Process: 2
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 Brought up 2 CPUs
@@ -129,19 +132,18 @@
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
+clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
 cpuidle: using governor ladder
 cpuidle: using governor menu
-platform 7000f800.fuse: Driver tegra20_fuse requests probe deferral
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 4 bytes.
 Serial: AMBA PL011 UART driver
 usb1_vbus: Failed to request enable GPIO170: -517
 reg-fixed-voltage regulators:regulator@2: Failed to register regulator: -517
-platform regulators:regulator@2: Driver reg-fixed-voltage requests probe deferral
 vgaarb: loaded
 SCSI subsystem initialized
 libata version 3.00 loaded.
@@ -160,7 +162,6 @@
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
-TCP: reno registered
 UDP hash table entries: 512 (order: 2, 16384 bytes)
 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
 NET: Registered protocol family 1
@@ -169,13 +170,14 @@
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 64
+CPU PMU: Failed to parse <no-node>/interrupt-affinity[0]
 hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
 futex hash table entries: 512 (order: 3, 32768 bytes)
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
 Key type id_resolver registered
 Key type id_legacy registered
-ntfs: driver 2.1.31 [Flags: R/O].
+ntfs: driver 2.1.32 [Flags: R/O].
 bounce: pool size: 64 pages
 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
 io scheduler noop registered
@@ -189,6 +191,7 @@
 pci_bus 0000:00: root bus resource [bus 00-ff]
 pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
 pci 0000:00:01.0: [10de:0bf0] type 01 class 0x060000
+pci 0000:00:01.0: IOMMU is currently not supported for PCI
 pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
 PCI: bus0: Fast back to back transfers disabled
 pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
@@ -197,6 +200,7 @@
 pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
 pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
+pci 0000:01:00.0: IOMMU is currently not supported for PCI
 pci 0000:01:00.0: supports D1 D2
 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
 PCI: bus1: Fast back to back transfers disabled
@@ -218,6 +222,7 @@
 pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
 pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
 pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
+tegra-ahb 6000c004.ahb: incorrect AHB base address in DT data - enabling workaround
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
 SuperH (H)SCI(F) driver initialized
@@ -257,6 +262,8 @@
 usbcore: registered new interface driver cdc_subset
 usbcore: registered new interface driver zaurus
 usbcore: registered new interface driver cdc_ncm
+tegra-phy c5004000.usb-phy: no vbus regulator
+tegra-phy c5008000.usb-phy: no vbus regulator
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-pci: EHCI PCI platform driver
 ehci-platform: EHCI generic platform driver
@@ -266,9 +273,15 @@
 ehci-st: EHCI STMicroelectronics driver
 ehci-exynos: EHCI EXYNOS driver
 tegra-ehci: Tegra EHCI driver
-platform c5000000.usb: Driver tegra-ehci requests probe deferral
-platform c5004000.usb: Driver tegra-ehci requests probe deferral
-platform c5008000.usb: Driver tegra-ehci requests probe deferral
+ulpi_phy_power_on: ulpi write failed
+tegra-ehci c5004000.usb: Failed to power on the phy
+tegra-ehci: probe of c5004000.usb failed with error -110
+tegra-ehci c5008000.usb: EHCI Host Controller
+tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci c5008000.usb: irq 290, io mem 0xc5008000
+tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 ohci-pci: OHCI PCI platform driver
 ohci-platform: OHCI generic platform driver
@@ -276,9 +289,6 @@
 SPEAr-ohci: OHCI SPEAr driver
 ohci-st: OHCI STMicroelectronics driver
 usbcore: registered new interface driver usb-storage
-platform c5000000.usb-phy: Driver tegra-phy requests probe deferral
-tegra-phy c5004000.usb-phy: no vbus regulator
-tegra-phy c5008000.usb-phy: no vbus regulator
 mousedev: PS/2 mouse device common for all mice
 rtc-em3027 2-0056: rtc core: registered rtc-em3027 as rtc0
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
@@ -287,7 +297,6 @@
 usbcore: registered new interface driver uvcvideo
 USB Video Class driver (1.1.1)
 gspca_main: v2.14.0 registered
-Driver 'mmcblk' needs updating - please use bus_type methods
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 Synopsys Designware Multimedia Card Interface Driver
@@ -311,58 +320,47 @@
 tlv320aic23-codec 2-001a: ASoC: Failed to add route LLINEIN -> NULL -> Line Input
 tlv320aic23-codec 2-001a: Control not supported for path RLINEIN -> [NULL] -> Line Input
 tlv320aic23-codec 2-001a: ASoC: no dapm match for RLINEIN --> NULL --> Line Input
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
 tlv320aic23-codec 2-001a: ASoC: Failed to add route RLINEIN -> NULL -> Line Input
 tlv320aic23-codec 2-001a: Control not supported for path MICIN -> [NULL] -> Mic Input
 tlv320aic23-codec 2-001a: ASoC: no dapm match for MICIN --> NULL --> Mic Input
 tlv320aic23-codec 2-001a: ASoC: Failed to add route MICIN -> NULL -> Mic Input
 tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok
-TCP: cubic registered
 NET: Registered protocol family 17
 can: controller area network core (rev 20120528 abi 9)
 NET: Registered protocol family 29
 can: raw protocol (rev 20120528)
 can: broadcast manager protocol (rev 20120528 t)
 can: netlink gateway (rev 20130117) max_hops=1
-mmc0: host does not support reading read-only switch, assuming write-enable
-mmc0: new high speed SDHC card at address b368
-mmcblk0: mmc0:b368 NCard 3.70 GiB 
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
-platform c5000000.usb: Driver tegra-ehci requests probe deferral
- mmcblk0: p1
-ulpi_phy_power_on: ulpi write failed
-tegra-ehci c5004000.usb: Failed to power on the phy
-tegra-ehci: probe of c5004000.usb failed with error -110
-tegra-ehci c5008000.usb: EHCI Host Controller
-tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci c5008000.usb: irq 290, io mem 0xc5008000
-tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
+mmc0: host does not support reading read-only switch, assuming write-enable
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
+mmc0: new high speed SDHC card at address b368
+mmcblk0: mmc0:b368 NCard 3.70 GiB 
+ mmcblk0: p1
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
-mmc1: new high speed SD card at address b368
+hub 1-1:1.0: USB hub found
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
-rtc-em3027 2-0056: setting system clock to 2014-12-25 19:43:26 UTC (1419536606)
+hub 1-1:1.0: 4 ports detected
+rtc-em3027 2-0056: setting system clock to 2014-12-25 19:51:22 UTC (1419537082)
 ALSA device list:
   #0: tegra-trimslice
- mmcblk1: p1 p2
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
+mmc1: new high speed SD card at address b368
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+ mmcblk1: p1 p2
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 796K (c0d05000 - c0dcc000)
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
-hub 1-1:1.0: USB hub found
-hub 1-1:1.0: 4 ports detected
+Freeing unused kernel memory: 816K (c0d54000 - c0e20000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra20-trimslice/tegra20-trimslice/tegra_defconfig_log.txt
--- /tmp/fooa	2015-04-26 18:38:24.727525489 -0700
+++ /tmp/foob	2015-04-26 18:38:24.731525487 -0700
@@ -19,7 +19,7 @@
 Out:   serial
 Err:   serial
 Net:   RTL8169#0
-Hit any key to stop autoboot:  2  0 
+Hit any key to stop autoboot:  2  1  0 
 Tegra20 (TrimSlice) # 
 Tegra20 (TrimSlice) # usb reset
 resetting USB...
@@ -42,24 +42,24 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ####
-	 3.2 MiB/s
+	 ########
+	 3.4 MiB/s
 done
-Bytes transferred = 4828512 (49ad60 hex)
+Bytes transferred = 4882864 (4a81b0 hex)
 Tegra20 (TrimSlice) # tftpboot 0x02408000 tegra20-trimslice.dtb
 Using RTL8169#0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.103
 Filename 'tegra20-trimslice.dtb'.
 Load address: 0x2408000
 Loading: *##
-	 3.3 MiB/s
+	 2.9 MiB/s
 done
-Bytes transferred = 20902 (51a6 hex)
+Bytes transferred = 21130 (528a hex)
 Tegra20 (TrimSlice) # bootz 0x00408000 - 0x02408000
-Kernel image @ 0x408000 [ 0x000000 - 0x49ad60 ]
+Kernel image @ 0x408000 [ 0x000000 - 0x4a81b0 ]
 ## Flattened Device Tree blob at 02408000
    Booting using the fdt blob at 0x2408000
-   Using Device Tree in place at 02408000, end 024101a5
+   Using Device Tree in place at 02408000, end 02410289
 
 Starting kernel ...
 
@@ -67,29 +67,30 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 4.0.0-00776-g39a8804 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Apr 13 09:57:16 PDT 2015
+Linux version 4.1.0-rc1-12186-gb787f68 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Apr 26 18:33:40 PDT 2015
 CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: Compulab TrimSlice board
 debug: ignoring loglevel setting.
+earlycon: no match for ttyS0,115200n8
 bootconsole [earlycon0] enabled
 cma: Reserved 64 MiB at 0x3c000000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 262144
-free_area_init_node: node 0, pgdat c0943cc0, node_mem_map eeff7000
+free_area_init_node: node 0, pgdat c0962340, node_mem_map eeff7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
   HighMem zone: 67584 pages, LIFO batch:15
-PERCPU: Embedded 11 pages/cpu @eefcb000 s12672 r8192 d24192 u45056
-pcpu-alloc: s12672 r8192 d24192 u45056 alloc=11*4096
+PERCPU: Embedded 12 pages/cpu @eefc9000 s17216 r8192 d23744 u49152
+pcpu-alloc: s17216 r8192 d23744 u49152 alloc=12*4096
 pcpu-alloc: [0] 0 [0] 1 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260624
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug noinitrd earlyprintk init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 964004K/1048576K available (6614K kernel code, 317K rwdata, 2228K rodata, 300K init, 351K bss, 19036K reserved, 65536K cma-reserved, 204800K highmem)
+Memory: 963868K/1048576K available (6696K kernel code, 311K rwdata, 2260K rodata, 312K init, 351K bss, 19172K reserved, 65536K cma-reserved, 204800K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -97,15 +98,16 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc08aac98   (8844 kB)
-      .init : 0xc08ab000 - 0xc08f6000   ( 300 kB)
-      .data : 0xc08f6000 - 0xc09457a0   ( 318 kB)
-       .bss : 0xc09457a0 - 0xc099d3f0   ( 352 kB)
+      .text : 0xc0008000 - 0xc08c7554   (8958 kB)
+      .init : 0xc08c8000 - 0xc0916000   ( 312 kB)
+      .data : 0xc0916000 - 0xc0963ec0   ( 312 kB)
+       .bss : 0xc0966000 - 0xc09bde94   ( 352 kB)
 Preemptible hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
 RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
 NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 128 interrupts forwarded to /interrupt-controller@50041000
 L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
 L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
 L2C-310 errata 727915 769419 enabled
@@ -114,7 +116,8 @@
 L2C-310 ID prefetch enabled, offset 1 lines
 L2C-310 cache controller enabled, 8 ways, 1024 kB
 L2C-310: CACHE_ID 0x410000c4, AUX_CTRL 0x7e480001
-sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
 Console: colour dummy device 80x30
 Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
@@ -125,7 +128,7 @@
 Initializing cgroup subsys debug
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x644a58 - 0x644af0
+Setting up static identity map for 0x8440 - 0x84d8
 Tegra Revision: A03 prime SKU: 8 CPU Process: 1 Core Process: 2
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 Brought up 2 CPUs
@@ -133,18 +136,17 @@
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
+clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
 cpuidle: using governor ladder
 cpuidle: using governor menu
-platform 7000f800.fuse: Driver tegra20_fuse requests probe deferral
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 4 bytes.
 usb1_vbus: Failed to request enable GPIO170: -517
 reg-fixed-voltage regulators:regulator@2: Failed to register regulator: -517
-platform regulators:regulator@2: Driver reg-fixed-voltage requests probe deferral
 vgaarb: loaded
 SCSI subsystem initialized
 libata version 3.00 loaded.
@@ -168,7 +170,6 @@
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
-TCP: reno registered
 UDP hash table entries: 512 (order: 2, 16384 bytes)
 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
 NET: Registered protocol family 1
@@ -177,6 +178,7 @@
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 64
+CPU PMU: Failed to parse <no-node>/interrupt-affinity[0]
 hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
 futex hash table entries: 512 (order: 3, 32768 bytes)
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
@@ -190,6 +192,7 @@
 pci_bus 0000:00: root bus resource [bus 00-ff]
 pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
 pci 0000:00:01.0: [10de:0bf0] type 01 class 0x060000
+pci 0000:00:01.0: IOMMU is currently not supported for PCI
 pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
 PCI: bus0: Fast back to back transfers disabled
 pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
@@ -198,6 +201,7 @@
 pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
 pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
 pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
+pci 0000:01:00.0: IOMMU is currently not supported for PCI
 pci 0000:01:00.0: supports D1 D2
 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
 PCI: bus1: Fast back to back transfers disabled
@@ -219,6 +223,7 @@
 pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
 pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
 pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
+tegra-ahb 6000c004.ahb: incorrect AHB base address in DT data - enabling workaround
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 16 channels
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
 console [ttyS0] disabled
@@ -258,19 +263,24 @@
 usbcore: registered new interface driver cdc_subset
 usbcore: registered new interface driver zaurus
 usbcore: registered new interface driver cdc_ncm
+tegra-phy c5004000.usb-phy: no vbus regulator
+tegra-phy c5008000.usb-phy: no vbus regulator
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-pci: EHCI PCI platform driver
 tegra-ehci: Tegra EHCI driver
-platform c5000000.usb: Driver tegra-ehci requests probe deferral
-platform c5004000.usb: Driver tegra-ehci requests probe deferral
-platform c5008000.usb: Driver tegra-ehci requests probe deferral
+ulpi_phy_power_on: ulpi write failed
+tegra-ehci c5004000.usb: Failed to power on the phy
+tegra-ehci: probe of c5004000.usb failed with error -110
+tegra-ehci c5008000.usb: EHCI Host Controller
+tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci c5008000.usb: irq 290, io mem 0xc5008000
+tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
 usbcore: registered new interface driver cdc_acm
 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 usbcore: registered new interface driver cdc_wdm
 usbcore: registered new interface driver usb-storage
-platform c5000000.usb-phy: Driver tegra-phy requests probe deferral
-tegra-phy c5004000.usb-phy: no vbus regulator
-tegra-phy c5008000.usb-phy: no vbus regulator
 mousedev: PS/2 mouse device common for all mice
 rtc-em3027 2-0056: rtc core: registered rtc-em3027 as rtc0
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
@@ -279,7 +289,6 @@
 usbcore: registered new interface driver uvcvideo
 USB Video Class driver (1.1.1)
 gspca_main: v2.14.0 registered
-Driver 'mmcblk' needs updating - please use bus_type methods
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
@@ -304,18 +313,15 @@
 tlv320aic23-codec 2-001a: Control not supported for path MICIN -> [NULL] -> Mic Input
 tlv320aic23-codec 2-001a: ASoC: no dapm match for MICIN --> NULL --> Mic Input
 tlv320aic23-codec 2-001a: ASoC: Failed to add route MICIN -> NULL -> Mic Input
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
 tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok
-TCP: cubic registered
 NET: Registered protocol family 10
 mip6: Mobile IPv6
 sit: IPv6 over IPv4 tunneling driver
+mmc0: host does not support reading read-only switch, assuming write-enable
 NET: Registered protocol family 17
 NET: Registered protocol family 15
 can: controller area network core (rev 20120528 abi 9)
-mmc0: host does not support reading read-only switch, assuming write-enable
-mmc0: new high speed SDHC card at address b368
-mmcblk0: mmc0:b368 NCard 3.70 GiB 
- mmcblk0: p1
 NET: Registered protocol family 29
 can: raw protocol (rev 20120528)
 can: broadcast manager protocol (rev 20120528 t)
@@ -327,39 +333,32 @@
 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
 Bluetooth: HIDP socket layer initialized
 Registering SWP/SWPB emulation handler
-platform c5000000.usb: Driver tegra-ehci requests probe deferral
-mmc1: new high speed SD card at address b368
-mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
-ulpi_phy_power_on: ulpi write failed
-tegra-ehci c5004000.usb: Failed to power on the phy
-tegra-ehci: probe of c5004000.usb failed with error -110
-tegra-ehci c5008000.usb: EHCI Host Controller
- mmcblk1: p1 p2
-tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci c5008000.usb: irq 290, io mem 0xc5008000
-tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci c5000000.usb: EHCI Host Controller
 tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 2
 tegra-ehci c5000000.usb: irq 288, io mem 0xc5000000
+mmc0: new high speed SDHC card at address b368
 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input0
-rtc-em3027 2-0056: setting system clock to 2014-12-25 19:43:44 UTC (1419536624)
+rtc-em3027 2-0056: setting system clock to 2014-12-25 19:51:40 UTC (1419537100)
+hub 1-1:1.0: USB hub found
 ALSA device list:
   #0: tegra-trimslice
+hub 1-1:1.0: 4 ports detected
+mmcblk0: mmc0:b368 NCard 3.70 GiB 
+ mmcblk0: p1
 kjournald starting.  Commit interval 5 seconds
 EXT3-fs (mmcblk0p1): using internal journal
 EXT3-fs (mmcblk0p1): recovery complete
 EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 300K (c08ab000 - c08f6000)
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
+Freeing unused kernel memory: 312K (c08c8000 - c0916000)
+mmc1: new high speed SD card at address b368
+mmcblk1: mmc1:b368 NCard 1.83 GiB (ro)
+ mmcblk1: p1 p2
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.405091] hub 1-1:1.0: USB hub found
-hub 1-1:1.0: 4 ports detected
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2015-04-26 18:38:24.739525483 -0700
+++ /tmp/foob	2015-04-26 18:38:24.743525480 -0700
@@ -37,50 +37,51 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #########################
-	 3.3 MiB/s
+	 ###################################
+	 3.4 MiB/s
 done
-Bytes transferred = 6082800 (5cd0f0 hex)
+Bytes transferred = 6227624 (5f06a8 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
-Loading: *##
-	 2.6 MiB/s
+Loading: *####
+	 3.1 MiB/s
 done
-Bytes transferred = 24641 (6041 hex)
+Bytes transferred = 51191 (c7f7 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x5cd0f0 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5f06a8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff6000, end 8ffff040 ... OK
+   Loading Device Tree to 8fff0000, end 8ffff7f6 ... OK
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 4.0.0-00776-g39a8804 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Apr 13 09:56:56 PDT 2015
+Linux version 4.1.0-rc1-12186-gb787f68 (pwalmsley@sellafield) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Apr 26 18:33:34 PDT 2015
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
 debug: ignoring loglevel setting.
+earlycon: no match for ttyS0,115200n8
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0ec7880, node_mem_map ee7f8000
+free_area_init_node: node 0, pgdat c0f1d340, node_mem_map ee7f8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
   HighMem zone: 329472 pages, LIFO batch:31
-PERCPU: Embedded 11 pages/cpu @ee7b1000 s12480 r8192 d24384 u45056
-pcpu-alloc: s12480 r8192 d24384 u45056 alloc=11*4096
+PERCPU: Embedded 12 pages/cpu @ee793000 s16960 r8192 d24000 u49152
+pcpu-alloc: s16960 r8192 d24000 u49152 alloc=12*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 1999696K/2096128K available (7834K kernel code, 1013K rwdata, 3412K rodata, 796K init, 316K bss, 30896K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 1999196K/2096128K available (7987K kernel code, 1020K rwdata, 3576K rodata, 816K init, 317K bss, 31396K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -88,16 +89,17 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0d04b40   (11251 kB)
-      .init : 0xc0d05000 - 0xc0dcc000   ( 796 kB)
-      .data : 0xc0dcc000 - 0xc0ec97a0   (1014 kB)
-       .bss : 0xc0ec97a0 - 0xc0f188a8   ( 317 kB)
+      .text : 0xc0208000 - 0xc0d53f40   (11568 kB)
+      .init : 0xc0d54000 - 0xc0e20000   ( 816 kB)
+      .data : 0xc0e20000 - 0xc0f1f300   (1021 kB)
+       .bss : 0xc0f22000 - 0xc0f716a8   ( 318 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
 	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
 RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
 NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
 L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
 L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
 L2C-310 erratum 769419 enabled
@@ -107,7 +109,8 @@
 L2C-310 dynamic clock gating enabled, standby mode enabled
 L2C-310 cache controller enabled, 8 ways, 1024 kB
 L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e480001
-sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
 Console: colour dummy device 80x30
 Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=5000)
@@ -116,7 +119,7 @@
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x809682c8 - 0x80968360
+Setting up static identity map for 0x80209000 - 0x80209098
 Tegra Revision: A03 SKU: 128 CPU Process: 4 Core Process: 0
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
@@ -126,6 +129,7 @@
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
+clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
@@ -135,42 +139,20 @@
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 4 bytes.
 Serial: AMBA PL011 UART driver
-platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral
-platform regulators:regulator@2: Driver reg-fixed-voltage requests probe deferral
 vdd_5v_sata: Failed to request enable GPIO30: -517
 reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
-platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
 usb1_vbus: Failed to request enable GPIO238: -517
 reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
-platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
 usb3_vbus: Failed to request enable GPIO236: -517
 reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
-platform regulators:regulator@5: Driver reg-fixed-voltage requests probe deferral
-platform regulators:regulator@6: Driver reg-fixed-voltage requests probe deferral
 sys_3v3_pexs: Failed to request enable GPIO95: -517
 reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
-platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
-reg-fixed-voltage regulators:regulator@8: Failed to find supply vin
-reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
-platform regulators:regulator@8: Driver reg-fixed-voltage requests probe deferral
 vgaarb: loaded
 SCSI subsystem initialized
 libata version 3.00 loaded.
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
-vrtc: supplied by vdd_5v_in
-vdd_1v8_gen: supplied by vdd_5v_in
-vddio_ddr_1v2: supplied by vdd_5v_in
-vdd_1v5_gen: supplied by vdd_5v_in
-vdd_pexa,vdd_pexb: supplied by vdd_1v5_gen
-vdd_sata,avdd_plle: supplied by vdd_1v5_gen
-ldo3: supplied by vdd_5v_in
-vdd_rtc: supplied by vdd_5v_in
-vddio_sdmmc,avdd_vdac: supplied by vdd_5v_in
-avdd_dsi_csi,pwrdet_mipi: supplied by vdd_1v8_gen
-vdd_pllm,x,u,a_p_c_s: supplied by vdd_1v8_gen
-vdd_ddr_hs: supplied by vdd_1v8_gen
 media: Linux media interface: v0.10
 Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
@@ -183,7 +165,6 @@
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
-TCP: reno registered
 UDP hash table entries: 512 (order: 2, 16384 bytes)
 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
 NET: Registered protocol family 1
@@ -192,21 +173,39 @@
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 64
+CPU PMU: Failed to parse <no-node>/interrupt-affinity[0]
 hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
 futex hash table entries: 1024 (order: 4, 65536 bytes)
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
 Key type id_resolver registered
 Key type id_legacy registered
-ntfs: driver 2.1.31 [Flags: R/O].
+ntfs: driver 2.1.32 [Flags: R/O].
 bounce: pool size: 64 pages
 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
 io scheduler noop registered
 io scheduler deadline registered
 io scheduler cfq registered (default)
+tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_hsync_pd7" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "hdmi_int_pn7" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "ulpi_data3_po4" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_d10_pt2" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_d11_pt3" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_d0_pt4" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pu0" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pu3" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pu6" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pv3" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1"
 tegra-pcie 3000.pcie-controller: 2x3 configuration
+vdd_1v5_gen: supplied by vdd_5v_in
+vdd_pexa,vdd_pexb: supplied by vdd_1v5_gen
 tegra-pcie 3000.pcie-controller: Failed to get supply 'hvdd-pex': -517
-platform 3000.pcie-controller: Driver tegra-pcie requests probe deferral
+tegra-ahb 6000c004.ahb: incorrect AHB base address in DT data - enabling workaround
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
@@ -217,8 +216,8 @@
 console [ttyS0] enabled
 STMicroelectronics ASC driver initialized
 [drm] Initialized drm 1.1.0 20060810
+reg-fixed-voltage regulators:regulator@8: Failed to resolve vin-supply for +VDD_5V_HDMI
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
-platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
 loop: module loaded
 m25p80 spi32766.1: w25q32 (4096 Kbytes)
 CAN device driver interface
@@ -244,8 +243,6 @@
 ehci-st: EHCI STMicroelectronics driver
 ehci-exynos: EHCI EXYNOS driver
 tegra-ehci: Tegra EHCI driver
-platform 7d004000.usb: Driver tegra-ehci requests probe deferral
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 ohci-pci: OHCI PCI platform driver
 ohci-platform: OHCI generic platform driver
@@ -253,8 +250,6 @@
 SPEAr-ohci: OHCI SPEAr driver
 ohci-st: OHCI STMicroelectronics driver
 usbcore: registered new interface driver usb-storage
-platform 7d004000.usb-phy: Driver tegra-phy requests probe deferral
-platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
 mousedev: PS/2 mouse device common for all mice
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
@@ -263,7 +258,6 @@
 usbcore: registered new interface driver uvcvideo
 USB Video Class driver (1.1.1)
 gspca_main: v2.14.0 registered
-Driver 'mmcblk' needs updating - please use bus_type methods
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 Synopsys Designware Multimedia Card Interface Driver
@@ -292,7 +286,6 @@
 tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
 tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
 input: NVIDIA Tegra Beaver Headphones as /devices/soc0/sound/sound/card0/input0
-TCP: cubic registered
 NET: Registered protocol family 17
 can: controller area network core (rev 20120528 abi 9)
 NET: Registered protocol family 29
@@ -302,14 +295,9 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
-vdd_ddr: supplied by vdd_5v_in
-vdd_5v_sata: supplied by vdd_5v_in
-usb1_vbus: supplied by vdd_5v_in
-usb3_vbus: supplied by vdd_5v_in
+tegra-pcie 3000.pcie-controller: 2x3 configuration
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
-+VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
-tegra-pcie 3000.pcie-controller: 2x3 configuration
 tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
 tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
@@ -322,6 +310,7 @@
 pci_bus 0000:00: root bus resource [bus 00-ff]
 pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
 pci 0000:00:01.0: [10de:0e1c] type 01 class 0x060400
+pci 0000:00:01.0: IOMMU is currently not supported for PCI
 pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
 PCI: bus0: Fast back to back transfers disabled
 pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
@@ -329,6 +318,7 @@
 pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
 pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
 pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:01:00.0: IOMMU is currently not supported for PCI
 pci 0000:01:00.0: supports D1 D2
 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
 PCI: bus1: Fast back to back transfers disabled
@@ -350,6 +340,8 @@
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf00e8000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
++VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
+vdd_1v8_gen: supplied by vdd_5v_in
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 drm drm: No connectors reported connected with modes
@@ -358,8 +350,7 @@
 drm drm: fb0:  frame buffer device
 drm drm: registered panic notifier
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
-platform 7d004000.usb: Driver tegra-ehci requests probe deferral
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+usb3_vbus: supplied by vdd_5v_in
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci 7d004000.usb: EHCI Host Controller
 tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
@@ -384,7 +375,7 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 796K (c0d05000 - c0dcc000)
+Freeing unused kernel memory: 816K (c0d54000 - c0e20000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.213468] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.208492] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2015-04-26 18:38:24.751525476 -0700
+++ /tmp/foob	2015-04-26 18:38:24.755525473 -0700
@@ -27,7 +27,6 @@
 Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd'
 Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
 Tegra30 (Beaver) # tftpboot 0x81000000 zImage.tegra_defconfig
-Waiting for Ethernet connection... done.
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'zImage.tegra_defconfig'.
@@ -37,24 +36,24 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ####
-	 2.9 MiB/s
+	 ########
+	 3.4 MiB/s
 done
-Bytes transferred = 4828512 (49ad60 hex)
+Bytes transferred = 4882864 (4a81b0 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
-Loading: *##
-	 2.6 MiB/s
+Loading: *####
+	 3.1 MiB/s
 done
-Bytes transferred = 24641 (6041 hex)
+Bytes transferred = 51191 (c7f7 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x49ad60 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x4a81b0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff6000, end 8ffff040 ... OK
+   Loading Device Tree to 8fff0000, end 8ffff7f6 ... OK
 
 Starting kernel ...
 
@@ -62,28 +61,29 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 4.0.0-00776-g39a8804 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Apr 13 09:57:16 PDT 2015
+Linux version 4.1.0-rc1-12186-gb787f68 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Apr 26 18:33:40 PDT 2015
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
 debug: ignoring loglevel setting.
+earlycon: no match for ttyS0,115200n8
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0943cc0, node_mem_map ee7f7000
+free_area_init_node: node 0, pgdat c0962340, node_mem_map ee7f7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
   HighMem zone: 329472 pages, LIFO batch:31
-PERCPU: Embedded 11 pages/cpu @ee7b0000 s12672 r8192 d24192 u45056
-pcpu-alloc: s12672 r8192 d24192 u45056 alloc=11*4096
+PERCPU: Embedded 12 pages/cpu @ee792000 s17216 r8192 d23744 u49152
+pcpu-alloc: s17216 r8192 d23744 u49152 alloc=12*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2003252K/2096128K available (6614K kernel code, 317K rwdata, 2228K rodata, 300K init, 351K bss, 27340K reserved, 65536K cma-reserved, 1252352K highmem)
+Memory: 2002980K/2096128K available (6696K kernel code, 311K rwdata, 2260K rodata, 312K init, 351K bss, 27612K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
@@ -91,13 +91,14 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc08aac98   (8844 kB)
-      .init : 0xc08ab000 - 0xc08f6000   ( 300 kB)
-      .data : 0xc08f6000 - 0xc09457a0   ( 318 kB)
-       .bss : 0xc09457a0 - 0xc099d3f0   ( 352 kB)
+      .text : 0xc0008000 - 0xc08c7554   (8958 kB)
+      .init : 0xc08c8000 - 0xc0916000   ( 312 kB)
+      .data : 0xc0916000 - 0xc0963ec0   ( 312 kB)
+       .bss : 0xc0966000 - 0xc09bde94   ( 352 kB)
 Preemptible hierarchical RCU implementation.
 	Additional per-CPU info printed with stalls.
 NR_IRQS:16 nr_irqs:16 16
+/interrupt-controller@60004000: 160 interrupts forwarded to /interrupt-controller@50041000
 L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
 L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
 L2C-310 erratum 769419 enabled
@@ -107,7 +108,8 @@
 L2C-310 dynamic clock gating enabled, standby mode enabled
 L2C-310 cache controller enabled, 8 ways, 1024 kB
 L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e480001
-sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
+clocksource timer_us: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
 Switching to timer-based delay loop, resolution 1000ns
 Console: colour dummy device 80x30
 Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
@@ -118,7 +120,7 @@
 Initializing cgroup subsys debug
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x80644a58 - 0x80644af0
+Setting up static identity map for 0x80008440 - 0x800084d8
 Tegra Revision: A03 SKU: 128 CPU Process: 4 Core Process: 0
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
@@ -128,6 +130,7 @@
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
+clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
 pinctrl core: initialized pinctrl subsystem
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
@@ -136,42 +139,20 @@
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 4 bytes.
-platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral
-platform regulators:regulator@2: Driver reg-fixed-voltage requests probe deferral
 vdd_5v_sata: Failed to request enable GPIO30: -517
 reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
-platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
 usb1_vbus: Failed to request enable GPIO238: -517
 reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
-platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
 usb3_vbus: Failed to request enable GPIO236: -517
 reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
-platform regulators:regulator@5: Driver reg-fixed-voltage requests probe deferral
-platform regulators:regulator@6: Driver reg-fixed-voltage requests probe deferral
 sys_3v3_pexs: Failed to request enable GPIO95: -517
 reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
-platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
-reg-fixed-voltage regulators:regulator@8: Failed to find supply vin
-reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
-platform regulators:regulator@8: Driver reg-fixed-voltage requests probe deferral
 vgaarb: loaded
 SCSI subsystem initialized
 libata version 3.00 loaded.
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
-vrtc: supplied by vdd_5v_in
-vdd_1v8_gen: supplied by vdd_5v_in
-vddio_ddr_1v2: supplied by vdd_5v_in
-vdd_1v5_gen: supplied by vdd_5v_in
-vdd_pexa,vdd_pexb: supplied by vdd_1v5_gen
-vdd_sata,avdd_plle: supplied by vdd_1v5_gen
-ldo3: supplied by vdd_5v_in
-vdd_rtc: supplied by vdd_5v_in
-vddio_sdmmc,avdd_vdac: supplied by vdd_5v_in
-avdd_dsi_csi,pwrdet_mipi: supplied by vdd_1v8_gen
-vdd_pllm,x,u,a_p_c_s: supplied by vdd_1v8_gen
-vdd_ddr_hs: supplied by vdd_1v8_gen
 Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
@@ -189,7 +170,6 @@
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
 TCP: Hash tables configured (established 8192 bind 8192)
-TCP: reno registered
 UDP hash table entries: 512 (order: 2, 16384 bytes)
 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
 NET: Registered protocol family 1
@@ -198,14 +178,32 @@
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 64
+CPU PMU: Failed to parse <no-node>/interrupt-affinity[0]
 hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
 futex hash table entries: 1024 (order: 4, 65536 bytes)
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 bounce: pool size: 64 pages
 io scheduler noop registered (default)
+tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat6_pd3" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "sdmmc3_dat7_pd4" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_vsync_pd6" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_hsync_pd7" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "hdmi_int_pn7" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "ulpi_data3_po4" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_d10_pt2" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_d11_pt3" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "vi_d0_pt4" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pu0" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pu3" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pu6" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pv3" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pbb0" for function "rsvd1"
+tegra30-pinctrl 70000868.pinmux: invalid group "pcc1" for function "rsvd1"
 tegra-pcie 3000.pcie-controller: 2x3 configuration
+vdd_1v5_gen: supplied by vdd_5v_in
+vdd_pexa,vdd_pexb: supplied by vdd_1v5_gen
 tegra-pcie 3000.pcie-controller: Failed to get supply 'hvdd-pex': -517
-platform 3000.pcie-controller: Driver tegra-pcie requests probe deferral
+tegra-ahb 6000c004.ahb: incorrect AHB base address in DT data - enabling workaround
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
@@ -213,8 +211,8 @@
 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
 [drm] Initialized drm 1.1.0 20060810
+reg-fixed-voltage regulators:regulator@8: Failed to resolve vin-supply for +VDD_5V_HDMI
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
-platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
 loop: module loaded
 m25p80 spi32766.1: w25q32 (4096 Kbytes)
 CAN device driver interface
@@ -234,14 +232,10 @@
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-pci: EHCI PCI platform driver
 tegra-ehci: Tegra EHCI driver
-platform 7d004000.usb: Driver tegra-ehci requests probe deferral
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
 usbcore: registered new interface driver cdc_acm
 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 usbcore: registered new interface driver cdc_wdm
 usbcore: registered new interface driver usb-storage
-platform 7d004000.usb-phy: Driver tegra-phy requests probe deferral
-platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
 mousedev: PS/2 mouse device common for all mice
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
@@ -250,7 +244,6 @@
 usbcore: registered new interface driver uvcvideo
 USB Video Class driver (1.1.1)
 gspca_main: v2.14.0 registered
-Driver 'mmcblk' needs updating - please use bus_type methods
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
@@ -276,7 +269,6 @@
 tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
 tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
 input: NVIDIA Tegra Beaver Headphones as /devices/soc0/sound/sound/card0/input0
-TCP: cubic registered
 NET: Registered protocol family 10
 mip6: Mobile IPv6
 sit: IPv6 over IPv4 tunneling driver
@@ -294,18 +286,14 @@
 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
 Bluetooth: HIDP socket layer initialized
 Registering SWP/SWPB emulation handler
-vdd_ddr: supplied by vdd_5v_in
-vdd_5v_sata: supplied by vdd_5v_in
-usb1_vbus: supplied by vdd_5v_in
-usb3_vbus: supplied by vdd_5v_in
+tegra-pcie 3000.pcie-controller: 2x3 configuration
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
-+VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
-tegra-pcie 3000.pcie-controller: 2x3 configuration
 tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
 tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
+cfg80211: Calling CRDA to update world regulatory domain
 tegra-pcie 3000.pcie-controller: link 2 down, retrying
 tegra-pcie 3000.pcie-controller: link 2 down, ignoring
 tegra-pcie 3000.pcie-controller: PCI host bridge to bus 0000:00
@@ -314,6 +302,7 @@
 pci_bus 0000:00: root bus resource [bus 00-ff]
 pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
 pci 0000:00:01.0: [10de:0e1c] type 01 class 0x060400
+pci 0000:00:01.0: IOMMU is currently not supported for PCI
 pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
 PCI: bus0: Fast back to back transfers disabled
 pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
@@ -321,6 +310,7 @@
 pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
 pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
 pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:01:00.0: IOMMU is currently not supported for PCI
 pci 0000:01:00.0: supports D1 D2
 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
 PCI: bus1: Fast back to back transfers disabled
@@ -342,6 +332,8 @@
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
 r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf00b6000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
++VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
+vdd_1v8_gen: supplied by vdd_5v_in
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 drm drm: No connectors reported connected with modes
@@ -350,8 +342,7 @@
 drm drm: fb0:  frame buffer device
 drm drm: registered panic notifier
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
-platform 7d004000.usb: Driver tegra-ehci requests probe deferral
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+usb3_vbus: supplied by vdd_5v_in
 utmi_phy_clk_enable: timeout waiting for phy to stabilize
 tegra-ehci 7d004000.usb: EHCI Host Controller
 tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
@@ -377,7 +368,7 @@
 EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 300K (c08ab000 - c08f6000)
+Freeing unused kernel memory: 312K (c08c8000 - c0916000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.476482] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.496505] usb 2-1: new high-speed USB device number 2 using tegra-ehci
