Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	1969-12-31 16:00:00.000000000 -0800
+++ /tmp/foob	2015-03-02 14:46:48.845140195 -0800
@@ -0,0 +1,349 @@
+
+U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32)
+
+
+U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32)
+
+TEGRA114
+Board: NVIDIA Dalmore
+I2C:   ready
+DRAM:  2 GiB
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+In:    serial
+Out:   serial
+Err:   serial
+Net:   Net Initialization Skipped
+No ethernet found.
+Hit any key to stop autoboot:  2  0 
+Tegra114 (Dalmore) # 
+Tegra114 (Dalmore) # usb reset
+(Re)start USB...
+USB0:   USB EHCI 1.10
+scanning bus 0 for devices... 2 USB Device(s) found
+       scanning usb for storage devices... 0 Storage Device(s) found
+       scanning usb for ethernet devices... 
+Warning: asx0 using MAC address from net device
+1 Ethernet Device(s) found
+Tegra114 (Dalmore) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash'
+Tegra114 (Dalmore) # setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra114 (Dalmore) # tftpboot 0x81000000 zImage.multi_v7_defconfig
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.100
+Filename 'zImage.multi_v7_defconfig'.
+Load address: 0x81000000
+Loading: *#################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 ########
+	 3.3 MiB/s
+done
+Bytes transferred = 5842632 (5926c8 hex)
+Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.100
+Filename 'tegra114-dalmore.dtb'.
+Load address: 0x82000000
+Loading: *###
+	 3 MiB/s
+done
+Bytes transferred = 34638 (874e hex)
+Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
+Kernel image @ 0x81000000 [ 0x000000 - 0x5926c8 ]
+## Flattened Device Tree blob at 82000000
+   Booting using the fdt blob at 0x82000000
+   Loading Device Tree to 8fff4000, end 8ffff74d ... OK
+
+Starting kernel ...
+
+Booting Linux on physical CPU 0x0
+Linux version 4.0.0-rc1-23494-gc517d83 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Mar 2 14:40:36 PST 2015
+CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
+CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
+Machine model: NVIDIA Tegra114 Dalmore evaluation board
+debug: ignoring loglevel setting.
+cma: Reserved 64 MiB at 0xfb800000
+Memory policy: Data cache writealloc
+On node 0 totalpages: 524032
+free_area_init_node: node 0, pgdat c0e34ac0, node_mem_map ee7f8000
+  DMA zone: 1520 pages used for memmap
+  DMA zone: 0 pages reserved
+  DMA zone: 194560 pages, LIFO batch:31
+  HighMem zone: 329472 pages, LIFO batch:31
+PERCPU: Embedded 11 pages/cpu @ee7a7000 s12480 r8192 d24384 u45056
+pcpu-alloc: s12480 r8192 d24384 u45056 alloc=11*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash
+PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 2000240K/2096128K available (7602K kernel code, 922K rwdata, 3168K rodata, 780K init, 307K bss, 30352K reserved, 65536K cma-reserved, 1252352K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0208000 - 0xc0c8cb18   (10771 kB)
+      .init : 0xc0c8d000 - 0xc0d50000   ( 780 kB)
+      .data : 0xc0d50000 - 0xc0e36a20   ( 923 kB)
+       .bss : 0xc0e36a20 - 0xc0e838e8   ( 308 kB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+Hierarchical RCU implementation.
+	Additional per-CPU info printed with stalls.
+	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+NR_IRQS:16 nr_irqs:16 16
+L2C: failed to init: -19
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+Switching to timer-based delay loop, resolution 1000ns
+Architected cp15 timer(s) running at 12.00MHz (virt).
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
+Switching to timer-based delay loop, resolution 83ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+CPU: Testing write buffer coherency: ok
+/cpus/cpu@0 missing clock-frequency property
+/cpus/cpu@1 missing clock-frequency property
+/cpus/cpu@2 missing clock-frequency property
+/cpus/cpu@3 missing clock-frequency property
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x8092fc90 - 0x8092fd28
+Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 0
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+Brought up 4 CPUs
+SMP: Total of 4 processors activated (96.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor ladder
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 8 bytes.
+Serial: AMBA PL011 UART driver
+dvdd_ts: Failed to request enable GPIO61: -517
+reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517
+platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral
+usb1_vbus: Failed to request enable GPIO108: -517
+reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
+platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
+usb2_vbus: Failed to request enable GPIO86: -517
+reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
+platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@5: Failed to find supply vin
+reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
+platform regulators:regulator@5: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@6: Driver reg-fixed-voltage requests probe deferral
+VDD_5V0_HDMI_CON: Failed to request enable GPIO81: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
+platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+tps65090 2-0048: No cache defaults, reading back from HW
+vdd-sys-5v0: supplied by vdd_ac_bat
+vdd-sys-3v3: supplied by vdd_ac_bat
+vdd-ao: supplied by vdd_ac_bat
+vdd-lcd-bl: supplied by vdd_ac_bat
+TPS65090_RAILSFET2: supplied by vdd_ac_bat
+vdd-modem-3v3: supplied by vdd-sys-3v3
+avdd-lcd: supplied by vdd-sys-3v3
+vdd-lvds: supplied by vdd-sys-3v3
+vdd-sd-slot: supplied by vdd-sys-3v3
+vdd-com-3v3: supplied by vdd-sys-3v3
+vdd-sby-5v0: supplied by vdd_ac_bat
+vdd-sby-3v3: supplied by vdd_ac_bat
+genirq: Setting trigger mode 8 for irq 341 failed (gic_set_type+0x0/0x9c)
+palmas 2-0058: Irq flag is 0x00000000
+palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
+vddio-ddr: supplied by vdd-ao
+vddio-1v8: supplied by vdd-ao
+vdd-core: supplied by vdd-sys-3v3
+avdd-pll: supplied by vdd-sys-3v3
+sdhci-vdd-sd-slot: ramp_delay not set
+sdhci-vdd-sd-slot: supplied by vdd-sys-3v3
+avdd-cam1: supplied by vdd-sys-3v3
+avdd-cam2: supplied by vdd-sys-3v3
+avdd-dsi-csi: supplied by vddio-1v8
+vpp-fuse: supplied by vdd-sys-3v3
+LDO5: supplied by vdd_ac_bat
+vdd-sensor-2v85: supplied by vdd-sys-3v3
+vdd-af-cam1: supplied by vdd-sys-3v3
+vdd-rtc: supplied by vdd-ao
+vddio-sdmmc-2: supplied by sdhci-vdd-sd-slot
+hvdd-usb: supplied by vdd-sys-5v0
+avdd-usb: supplied by vdd-sys-5v0
+Linux video capture interface: v2.00
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+EDAC MC: Ver: 3.0.0
+Advanced Linux Sound Architecture Driver Initialized.
+Switched to clocksource arch_sys_counter
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+TCP: reno registered
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+ntfs: driver 2.1.31 [Flags: R/O].
+bounce: pool size: 64 pages
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
+io scheduler noop registered
+io scheduler deadline registered
+io scheduler cfq registered (default)
+tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+msm_serial: driver initialized
+console [ttyS0] disabled
+70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 329, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+STMicroelectronics ASC driver initialized
+[drm] Initialized drm 1.1.0 20060810
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+loop: module loaded
+m25p80 spi32766.0: w25q32dw (4096 Kbytes)
+CAN device driver interface
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-omap: OMAP-EHCI Host Controller driver
+ehci-orion: EHCI orion driver
+SPEAr-ehci: EHCI SPEAr driver
+ehci-st: EHCI STMicroelectronics driver
+ehci-exynos: EHCI EXYNOS driver
+tegra-ehci: Tegra EHCI driver
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-omap3: OHCI OMAP3 driver
+SPEAr-ohci: OHCI SPEAr driver
+ohci-st: OHCI STMicroelectronics driver
+usbcore: registered new interface driver usb-storage
+platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
+mousedev: PS/2 mouse device common for all mice
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps659 as rtc0
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+usbcore: registered new interface driver uvcvideo
+USB Video Class driver (1.1.1)
+gspca_main: v2.14.0 registered
+sbs-battery 0-000b: sbs_probe: Failed to get device status
+sbs-battery: probe of 0-000b failed with error -121
+Driver 'mmcblk' needs updating - please use bus_type methods
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 78000400.sdhci: Got CD GPIO
+sdhci-tegra 78000400.sdhci: Got WP GPIO
+sdhci-tegra 78000400.sdhci: No vmmc regulator found
+sdhci-tegra 78000400.sdhci: No vqmmc regulator found
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA
+sdhci-tegra 78000600.sdhci: No vmmc regulator found
+sdhci-tegra 78000600.sdhci: No vqmmc regulator found
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+usbcore: registered new interface driver snd-usb-audio
+mmc1: MAN_BKOPS_EN bit is not set
+mmc1: new high speed MMC card at address 0001
+mmcblk0: mmc1:0001 SEM32G 29.1 GiB 
+mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
+mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
+mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
+tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
+tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
+input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound/sound/card0/input0
+TCP: cubic registered
+NET: Registered protocol family 17
+can: controller area network core (rev 20120528 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20120528)
+can: broadcast manager protocol (rev 20120528 t)
+can: netlink gateway (rev 20130117) max_hops=1
+Key type dns_resolver registered
+ThumbEE CPU extension supported.
+Registering SWP/SWPB emulation handler
+usb1_vbus: supplied by vdd-sys-5v0
+usb2_vbus: supplied by vdd-sys-5v0
+vdd_hdmi_5v0: supplied by vdd-sys-5v0
+VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+Console: switching to colour frame buffer device 240x75
+drm drm: fb0:  frame buffer device
+drm drm: registered panic notifier
+[drm] Initialized tegra 0.0.0 20120330 on minor 0
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+input: gpio-keys as /devices/soc0/gpio-keys/input/input1
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-08-07 18:02:32 UTC (965671352)
+vdd_cam_1v8_reg: disabling
+usb1_vbus: disabling
+dvdd_ts: disabling
+ALSA device list:
+  #0: NVIDIA Tegra Dalmore
+EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
+EXT4-fs (mmcblk0p1): recovery complete
+EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext3 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 780K (c0c8d000 - c0d50000)
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    2.818171] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	1969-12-31 16:00:00.000000000 -0800
+++ /tmp/foob	2015-03-02 14:46:48.853140183 -0800
@@ -0,0 +1,343 @@
+
+U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32)
+
+
+U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32)
+
+TEGRA114
+Board: NVIDIA Dalmore
+I2C:   ready
+DRAM:  2 GiB
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+In:    serial
+Out:   serial
+Err:   serial
+Net:   Net Initialization Skipped
+No ethernet found.
+Hit any key to stop autoboot:  2  0 
+Tegra114 (Dalmore) # 
+Tegra114 (Dalmore) # usb reset
+(Re)start USB...
+USB0:   USB EHCI 1.10
+scanning bus 0 for devices... 2 USB Device(s) found
+       scanning usb for storage devices... 0 Storage Device(s) found
+       scanning usb for ethernet devices... 
+Warning: asx0 using MAC address from net device
+1 Ethernet Device(s) found
+Tegra114 (Dalmore) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash'
+Tegra114 (Dalmore) # setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra114 (Dalmore) # tftpboot 0x81000000 zImage.tegra_defconfig
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.100
+Filename 'zImage.tegra_defconfig'.
+Load address: 0x81000000
+Loading: *#################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 ####
+	 2.9 MiB/s
+done
+Bytes transferred = 4825392 (49a130 hex)
+Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.100
+Filename 'tegra114-dalmore.dtb'.
+Load address: 0x82000000
+Loading: *###
+	 2.4 MiB/s
+done
+Bytes transferred = 34638 (874e hex)
+Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
+Kernel image @ 0x81000000 [ 0x000000 - 0x49a130 ]
+## Flattened Device Tree blob at 82000000
+   Booting using the fdt blob at 0x82000000
+   Loading Device Tree to 8fff4000, end 8ffff74d ... OK
+
+Starting kernel ...
+
+Uncompressing Linux... done, booting the kernel.
+Booting Linux on physical CPU 0x0
+Initializing cgroup subsys cpu
+Initializing cgroup subsys cpuacct
+Linux version 4.0.0-rc1-128710-gc517d83 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Mar 2 14:39:56 PST 2015
+CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
+CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
+Machine model: NVIDIA Tegra114 Dalmore evaluation board
+debug: ignoring loglevel setting.
+cma: Reserved 64 MiB at 0xfbc00000
+Memory policy: Data cache writealloc
+On node 0 totalpages: 524032
+free_area_init_node: node 0, pgdat c0943c80, node_mem_map ee7f7000
+  Normal zone: 1520 pages used for memmap
+  Normal zone: 0 pages reserved
+  Normal zone: 194560 pages, LIFO batch:31
+  HighMem zone: 329472 pages, LIFO batch:31
+PERCPU: Embedded 11 pages/cpu @ee7a6000 s12672 r8192 d24192 u45056
+pcpu-alloc: s12672 r8192 d24192 u45056 alloc=11*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash
+PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 2003204K/2096128K available (6609K kernel code, 317K rwdata, 2228K rodata, 304K init, 351K bss, 27388K reserved, 65536K cma-reserved, 1252352K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0008000 - 0xc08a9bf8   (8839 kB)
+      .init : 0xc08aa000 - 0xc08f6000   ( 304 kB)
+      .data : 0xc08f6000 - 0xc09457a0   ( 318 kB)
+       .bss : 0xc09457a0 - 0xc099d3b0   ( 352 kB)
+Preemptible hierarchical RCU implementation.
+	Additional per-CPU info printed with stalls.
+NR_IRQS:16 nr_irqs:16 16
+L2C: failed to init: -19
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+Switching to timer-based delay loop, resolution 1000ns
+Architected cp15 timer(s) running at 12.00MHz (virt).
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
+Switching to timer-based delay loop, resolution 83ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Initializing cgroup subsys freezer
+Initializing cgroup subsys debug
+CPU: Testing write buffer coherency: ok
+/cpus/cpu@0 missing clock-frequency property
+/cpus/cpu@1 missing clock-frequency property
+/cpus/cpu@2 missing clock-frequency property
+/cpus/cpu@3 missing clock-frequency property
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x80643760 - 0x806437f8
+Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 0
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+Brought up 4 CPUs
+SMP: Total of 4 processors activated (96.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor ladder
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 8 bytes.
+dvdd_ts: Failed to request enable GPIO61: -517
+reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517
+platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral
+usb1_vbus: Failed to request enable GPIO108: -517
+reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
+platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
+usb2_vbus: Failed to request enable GPIO86: -517
+reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
+platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@5: Failed to find supply vin
+reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
+platform regulators:regulator@5: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@6: Driver reg-fixed-voltage requests probe deferral
+VDD_5V0_HDMI_CON: Failed to request enable GPIO81: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
+platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+tps65090 2-0048: No cache defaults, reading back from HW
+vdd-sys-5v0: supplied by vdd_ac_bat
+vdd-sys-3v3: supplied by vdd_ac_bat
+vdd-ao: supplied by vdd_ac_bat
+vdd-lcd-bl: supplied by vdd_ac_bat
+TPS65090_RAILSFET2: supplied by vdd_ac_bat
+vdd-modem-3v3: supplied by vdd-sys-3v3
+avdd-lcd: supplied by vdd-sys-3v3
+vdd-lvds: supplied by vdd-sys-3v3
+vdd-sd-slot: supplied by vdd-sys-3v3
+vdd-com-3v3: supplied by vdd-sys-3v3
+vdd-sby-5v0: supplied by vdd_ac_bat
+vdd-sby-3v3: supplied by vdd_ac_bat
+genirq: Setting trigger mode 8 for irq 341 failed (gic_set_type+0x0/0x94)
+palmas 2-0058: Irq flag is 0x00000000
+palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
+vddio-ddr: supplied by vdd-ao
+vddio-1v8: supplied by vdd-ao
+vdd-core: supplied by vdd-sys-3v3
+avdd-pll: supplied by vdd-sys-3v3
+sdhci-vdd-sd-slot: ramp_delay not set
+sdhci-vdd-sd-slot: supplied by vdd-sys-3v3
+avdd-cam1: supplied by vdd-sys-3v3
+avdd-cam2: supplied by vdd-sys-3v3
+avdd-dsi-csi: supplied by vddio-1v8
+vpp-fuse: supplied by vdd-sys-3v3
+LDO5: supplied by vdd_ac_bat
+vdd-sensor-2v85: supplied by vdd-sys-3v3
+vdd-af-cam1: supplied by vdd-sys-3v3
+vdd-rtc: supplied by vdd-ao
+vddio-sdmmc-2: supplied by sdhci-vdd-sd-slot
+hvdd-usb: supplied by vdd-sys-5v0
+avdd-usb: supplied by vdd-sys-5v0
+Linux video capture interface: v2.00
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+Advanced Linux Sound Architecture Driver Initialized.
+Bluetooth: Core ver 2.20
+NET: Registered protocol family 31
+Bluetooth: HCI device and connection manager initialized
+Bluetooth: HCI socket layer initialized
+Bluetooth: L2CAP socket layer initialized
+Bluetooth: SCO socket layer initialized
+cfg80211: Calling CRDA to update world regulatory domain
+Switched to clocksource arch_sys_counter
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+TCP: reno registered
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+bounce: pool size: 64 pages
+io scheduler noop registered (default)
+tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+console [ttyS0] disabled
+70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 329, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+[drm] Initialized drm 1.1.0 20060810
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+loop: module loaded
+m25p80 spi32766.0: w25q32dw (4096 Kbytes)
+CAN device driver interface
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+tegra-ehci: Tegra EHCI driver
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+usbcore: registered new interface driver cdc_acm
+cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
+usbcore: registered new interface driver cdc_wdm
+usbcore: registered new interface driver usb-storage
+platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
+mousedev: PS/2 mouse device common for all mice
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps659 as rtc0
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+usbcore: registered new interface driver uvcvideo
+USB Video Class driver (1.1.1)
+gspca_main: v2.14.0 registered
+sbs-battery 0-000b: sbs_probe: Failed to get device status
+sbs-battery: probe of 0-000b failed with error -121
+Driver 'mmcblk' needs updating - please use bus_type methods
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 78000400.sdhci: Got CD GPIO
+sdhci-tegra 78000400.sdhci: Got WP GPIO
+sdhci-tegra 78000400.sdhci: No vmmc regulator found
+sdhci-tegra 78000400.sdhci: No vqmmc regulator found
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA
+sdhci-tegra 78000600.sdhci: No vmmc regulator found
+sdhci-tegra 78000600.sdhci: No vqmmc regulator found
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+mmc1: MAN_BKOPS_EN bit is not set
+mmc1: new high speed MMC card at address 0001
+mmcblk0: mmc1:0001 SEM32G 29.1 GiB 
+mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
+mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
+mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
+tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
+tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
+input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound/sound/card0/input0
+TCP: cubic registered
+NET: Registered protocol family 10
+mip6: Mobile IPv6
+sit: IPv6 over IPv4 tunneling driver
+NET: Registered protocol family 17
+NET: Registered protocol family 15
+can: controller area network core (rev 20120528 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20120528)
+can: broadcast manager protocol (rev 20120528 t)
+can: netlink gateway (rev 20130117) max_hops=1
+Bluetooth: RFCOMM socket layer initialized
+Bluetooth: RFCOMM ver 1.11
+Bluetooth: BNEP (Ethernet Emulation) ver 1.3
+Bluetooth: BNEP socket layer initialized
+Bluetooth: HIDP (Human Interface Emulation) ver 1.2
+Bluetooth: HIDP socket layer initialized
+Registering SWP/SWPB emulation handler
+usb1_vbus: supplied by vdd-sys-5v0
+usb2_vbus: supplied by vdd-sys-5v0
+vdd_hdmi_5v0: supplied by vdd-sys-5v0
+VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+Console: switching to colour frame buffer device 240x75
+drm drm: fb0:  frame buffer device
+drm drm: registered panic notifier
+[drm] Initialized tegra 0.0.0 20120330 on minor 0
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+input: gpio-keys as /devices/soc0/gpio-keys/input/input1
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-08-07 18:02:01 UTC (965671321)
+vdd_cam_1v8_reg: disabling
+usb1_vbus: disabling
+dvdd_ts: disabling
+ALSA device list:
+  #0: NVIDIA Tegra Dalmore
+kjournald starting.  Commit interval 5 seconds
+EXT3-fs (mmcblk0p1): using internal journal
+EXT3-fs (mmcblk0p1): recovery complete
+EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
+VFS: Mounted root (ext3 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 304K (c08aa000 - c08f6000)
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    2.979658] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	1969-12-31 16:00:00.000000000 -0800
+++ /tmp/foob	2015-03-02 14:46:48.857140196 -0800
@@ -0,0 +1,446 @@
+
+U-Boot SPL 2014.07-00097-g772e173 (Jul 25 2014 - 20:02:52)
+
+
+U-Boot 2014.07-00097-g772e173 (Jul 25 2014 - 20:02:52)
+
+TEGRA124
+Board: NVIDIA Jetson TK1
+I2C:   ready
+DRAM:  2 GiB
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+In:    serial
+Out:   serial
+Err:   serial
+Net:   Net Initialization Skipped
+No ethernet found.
+Hit any key to stop autoboot:  2  0 
+Tegra124 (Jetson TK1) # 
+Tegra124 (Jetson TK1) # usb reset
+(Re)start USB...
+USB0:   USB EHCI 1.10
+scanning bus 0 for devices... 1 USB Device(s) found
+USB1:   USB EHCI 1.10
+scanning bus 1 for devices... 2 USB Device(s) found
+       scanning usb for storage devices... 0 Storage Device(s) found
+       scanning usb for ethernet devices... 
+Warning: asx0 using MAC address from net device
+1 Ethernet Device(s) found
+Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd'
+Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra124 (Jetson TK1) # tftpboot 0x81000000 zImage.multi_v7_defconfig
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+Filename 'zImage.multi_v7_defconfig'.
+Load address: 0x81000000
+Loading: *#################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 ########
+	 3.2 MiB/s
+done
+Bytes transferred = 5842632 (5926c8 hex)
+Tegra124 (Jetson TK1) # tftpboot 0x82000000 tegra124-jetson-tk1.dtb
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+Filename 'tegra124-jetson-tk1.dtb'.
+Load address: 0x82000000
+Loading: *####
+	 2.8 MiB/s
+done
+Bytes transferred = 49059 (bfa3 hex)
+Tegra124 (Jetson TK1) # bootz 0x81000000 - 0x82000000
+Kernel image @ 0x81000000 [ 0x000000 - 0x5926c8 ]
+## Flattened Device Tree blob at 82000000
+   Booting using the fdt blob at 0x82000000
+   Using Device Tree in place at 82000000, end 8200efa2
+
+Starting kernel ...
+
+Booting Linux on physical CPU 0x0
+Linux version 4.0.0-rc1-23494-gc517d83 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Mar 2 14:40:36 PST 2015
+CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
+CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
+Machine model: NVIDIA Tegra124 Jetson TK1
+debug: ignoring loglevel setting.
+cma: Reserved 64 MiB at 0xfb800000
+Memory policy: Data cache writealloc
+On node 0 totalpages: 524032
+free_area_init_node: node 0, pgdat c0e34ac0, node_mem_map ee7f8000
+  DMA zone: 1520 pages used for memmap
+  DMA zone: 0 pages reserved
+  DMA zone: 194560 pages, LIFO batch:31
+  HighMem zone: 329472 pages, LIFO batch:31
+PERCPU: Embedded 11 pages/cpu @ee79a000 s12480 r8192 d24384 u45056
+pcpu-alloc: s12480 r8192 d24384 u45056 alloc=11*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
+PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 2000172K/2096128K available (7602K kernel code, 922K rwdata, 3168K rodata, 780K init, 307K bss, 30420K reserved, 65536K cma-reserved, 1252352K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0208000 - 0xc0c8cb18   (10771 kB)
+      .init : 0xc0c8d000 - 0xc0d50000   ( 780 kB)
+      .data : 0xc0d50000 - 0xc0e36a20   ( 923 kB)
+       .bss : 0xc0e36a20 - 0xc0e838e8   ( 308 kB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+Hierarchical RCU implementation.
+	Additional per-CPU info printed with stalls.
+	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+NR_IRQS:16 nr_irqs:16 16
+L2C: failed to init: -19
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+Switching to timer-based delay loop, resolution 1000ns
+Architected cp15 timer(s) running at 12.00MHz (virt).
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
+Switching to timer-based delay loop, resolution 83ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+CPU: Testing write buffer coherency: ok
+/cpus/cpu@0 missing clock-frequency property
+/cpus/cpu@1 missing clock-frequency property
+/cpus/cpu@2 missing clock-frequency property
+/cpus/cpu@3 missing clock-frequency property
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x8092fc90 - 0x8092fd28
+Tegra Revision: A01 SKU: 129 CPU Process: 1 Core Process: 1
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+Brought up 4 CPUs
+SMP: Total of 4 processors activated (96.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor ladder
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 8 bytes.
+Serial: AMBA PL011 UART driver
++5V_SYS: supplied by +VDD_MUX
++3.3V_SYS: supplied by +VDD_MUX
+platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@4: Failed to find supply vin
+reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
+platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
++USB0_VBUS_SW: Failed to request enable GPIO108: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
+platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
++5V_USB_HS: Failed to request enable GPIO109: -517
+reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
+platform regulators:regulator@8: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@10: Driver reg-fixed-voltage requests probe deferral
++1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517
+reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
+platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral
++5V_HDMI_CON: Failed to request enable GPIO86: -517
+reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517
+platform regulators:regulator@12: Driver reg-fixed-voltage requests probe deferral
++5V_SATA: Failed to request enable GPIO242: -517
+reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517
+platform regulators:regulator@13: Driver reg-fixed-voltage requests probe deferral
++12V_SATA: Failed to request enable GPIO242: -517
+reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517
+platform regulators:regulator@14: Driver reg-fixed-voltage requests probe deferral
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+Linux video capture interface: v2.00
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+EDAC MC: Ver: 3.0.0
+Advanced Linux Sound Architecture Driver Initialized.
+Switched to clocksource arch_sys_counter
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+TCP: reno registered
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+ntfs: driver 2.1.31 [Flags: R/O].
+bounce: pool size: 64 pages
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
+io scheduler noop registered
+io scheduler deadline registered
+io scheduler cfq registered (default)
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+platform 1003000.pcie-controller: Driver tegra-pcie requests probe deferral
+tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: emergency thermal reset enabled
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+msm_serial: driver initialized
+console [ttyS0] disabled
+70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 330, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+STMicroelectronics ASC driver initialized
+[drm] Initialized drm 1.1.0 20060810
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+loop: module loaded
+at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
+as3722 4-0040: AS3722 with revision 0x1 found
++1.35V_LP0(sd2): supplied by +5V_SYS
++1.35V_LP0(sd3): supplied by +5V_SYS
++1.05V_RUN: supplied by +5V_SYS
++1.8V_VDDIO: supplied by +5V_SYS
++1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
+as3722-regulator as3722-regulator: Failed to find supply vin-ldo1-6
+as3722-regulator as3722-regulator: regulator 8 register failed -517
+platform as3722-regulator: Driver as3722-regulator requests probe deferral
+tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
+tegra-ahci 70027000.sata: Failed to get regulators
+platform 70027000.sata: Driver tegra-ahci requests probe deferral
+m25p80 spi32765.0: w25q32dw (4096 Kbytes)
+CAN device driver interface
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-omap: OMAP-EHCI Host Controller driver
+ehci-orion: EHCI orion driver
+SPEAr-ehci: EHCI SPEAr driver
+ehci-st: EHCI STMicroelectronics driver
+ehci-exynos: EHCI EXYNOS driver
+tegra-ehci: Tegra EHCI driver
+platform 7d004000.usb: Driver tegra-ehci requests probe deferral
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-omap3: OHCI OMAP3 driver
+SPEAr-ohci: OHCI SPEAr driver
+ohci-st: OHCI STMicroelectronics driver
+usbcore: registered new interface driver usb-storage
+tegra-phy 7d004000.usb-phy: no vbus regulator
+platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
+mousedev: PS/2 mouse device common for all mice
+as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
+as3722-rtc as3722-rtc: RTC interrupt 364
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+usbcore: registered new interface driver uvcvideo
+USB Video Class driver (1.1.1)
+gspca_main: v2.14.0 registered
+0-004c supply vcc not found, using dummy regulator
+Driver 'mmcblk' needs updating - please use bus_type methods
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+sdhci-tegra 700b0400.sdhci: No vmmc regulator found
+platform 700b0400.sdhci: Driver sdhci-tegra requests probe deferral
+mmc0: Unknown controller version (3). You may experience problems.
+sdhci-tegra 700b0600.sdhci: No vmmc regulator found
+sdhci-tegra 700b0600.sdhci: No vqmmc regulator found
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+usbcore: registered new interface driver snd-usb-audio
+mmc0: MAN_BKOPS_EN bit is not set
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 SEM16G 14.6 GiB 
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
+Primary GPT is invalid, using alternate GPT.
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
+tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
+tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok
+input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card0/input0
+TCP: cubic registered
+NET: Registered protocol family 17
+can: controller area network core (rev 20120528 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20120528)
+can: broadcast manager protocol (rev 20120528 t)
+can: netlink gateway (rev 20130117) max_hops=1
+Key type dns_resolver registered
+ThumbEE CPU extension supported.
+Registering SWP/SWPB emulation handler
++3.3V_RUN: supplied by +3.3V_SYS
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
++USB0_VBUS_SW: supplied by +5V_SYS
++5V_USB_HS: supplied by +5V_SYS
++3.3V_LP0: supplied by +3.3V_SYS
+reg-fixed-voltage regulators:regulator@11: Failed to find supply vin
+reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
+platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral
++5V_HDMI_CON: supplied by +5V_SYS
++5V_SATA: supplied by +5V_SYS
++12V_SATA: supplied by +VDD_MUX
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+platform 1003000.pcie-controller: Driver tegra-pcie requests probe deferral
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
++1.35V_LP0(sd2): supplied by +5V_SYS
++1.35V_LP0(sd3): supplied by +5V_SYS
++1.05V_RUN: supplied by +5V_SYS
++1.8V_VDDIO: supplied by +5V_SYS
++1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
++1.8V_RUN_CAM: supplied by +3.3V_RUN
++1.2V_GEN_AVDD: supplied by +1.8V_VDDIO
++1.05V_LP0_VDD_RTC: supplied by +3.3V_SYS
++2.8V_RUN_CAM: supplied by +3.3V_SYS
++1.2V_RUN_CAM_FRONT: supplied by +1.8V_VDDIO
++VDDIO_SDMMC3: supplied by +3.3V_RUN
++1.05V_RUN_CAM_REAR: supplied by +1.8V_VDDIO
++3.3V_RUN_TOUCH: supplied by +5V_SYS
++2.8V_RUN_CAM_AF: supplied by +5V_SYS
++1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
+tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
+tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
+scsi host0: tegra-ahci
+scsi host1: tegra-ahci
+ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 340
+ata2: DUMMY
+tegra-ehci 7d004000.usb: EHCI Host Controller
+tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d004000.usb: irq 345, io mem 0x7d004000
+tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc1: Unknown controller version (3). You may experience problems.
+sdhci-tegra 700b0400.sdhci: No vmmc regulator found
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
++1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
+tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
+ata1: SATA link down (SStatus 0 SControl 300)
+tegra-pcie 1003000.pcie-controller: link 0 down, retrying
+tegra-pcie 1003000.pcie-controller: link 0 down, retrying
+tegra-pcie 1003000.pcie-controller: link 0 down, retrying
+tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
+tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
+tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
+tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
+pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
+pci_bus 0000:00: root bus resource [bus 00-ff]
+pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
+pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
+pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
+PCI: bus0: Fast back to back transfers disabled
+pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
+pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
+pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
+pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:01:00.0: supports D1 D2
+pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+PCI: bus1: Fast back to back transfers disabled
+pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
+pci 0000:00:02.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
+pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
+pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
+pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
+pci 0000:01:00.0: BAR 2: assigned [mem 0x13000000-0x13000fff 64bit]
+pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
+pci 0000:00:02.0: PCI bridge to [bus 01]
+pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
+pci 0000:00:02.0:   bridge window [mem 0x13000000-0x130fffff]
+pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
+pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:02.0: enabling device (0140 -> 0143)
+pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
+pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
+pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
+r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
+r8169 0000:01:00.0: enabling device (0140 -> 0143)
+r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xf017e000, 00:04:4b:25:b3:b4, XID 0c000800 IRQ 381
+r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+drm drm: No connectors reported connected with modes
+[drm] Cannot find any crtc or sizes - going 1024x768
+Console: switching to colour frame buffer device 128x48
+drm drm: fb0:  frame buffer device
+drm drm: registered panic notifier
+[drm] Initialized tegra 0.0.0 20120330 on minor 0
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci 7d008000.usb: irq 346, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+input: gpio-keys as /devices/soc0/gpio-keys/input/input1
+as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:48 UTC (949363248)
++1.8V_RUN_VPP_FUSE: disabling
++2.8V_RUN_CAM_AF: disabling
++3.3V_RUN_TOUCH: disabling
++1.05V_RUN_CAM_REAR: disabling
++1.2V_RUN_CAM_FRONT: disabling
++2.8V_RUN_CAM: disabling
++1.8V_RUN_CAM: disabling
++USB0_VBUS_SW: disabling
+ALSA device list:
+  #0: NVIDIA Tegra Jetson TK1
+EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
+EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
+EXT4-fs (mmcblk0p1): recovery complete
+EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 780K (c0c8d000 - c0d50000)
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    4.589660] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	1969-12-31 16:00:00.000000000 -0800
+++ /tmp/foob	2015-03-02 14:46:48.865140207 -0800
@@ -0,0 +1,413 @@
+
+U-Boot SPL 2014.07-00097-g772e173 (Jul 25 2014 - 20:02:52)
+
+
+U-Boot 2014.07-00097-g772e173 (Jul 25 2014 - 20:02:52)
+
+TEGRA124
+Board: NVIDIA Jetson TK1
+I2C:   ready
+DRAM:  2 GiB
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+In:    serial
+Out:   serial
+Err:   serial
+Net:   Net Initialization Skipped
+No ethernet found.
+Hit any key to stop autoboot:  2  0 
+Tegra124 (Jetson TK1) # 
+Tegra124 (Jetson TK1) # usb reset
+(Re)start USB...
+USB0:   USB EHCI 1.10
+scanning bus 0 for devices... 1 USB Device(s) found
+USB1:   USB EHCI 1.10
+scanning bus 1 for devices... 2 USB Device(s) found
+       scanning usb for storage devices... 0 Storage Device(s) found
+       scanning usb for ethernet devices... 
+Warning: asx0 using MAC address from net device
+1 Ethernet Device(s) found
+Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd'
+Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra124 (Jetson TK1) # tftpboot 0x81000000 zImage.tegra_defconfig
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+Filename 'zImage.tegra_defconfig'.
+Load address: 0x81000000
+Loading: *#################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 ####
+	 2.9 MiB/s
+done
+Bytes transferred = 4825392 (49a130 hex)
+Tegra124 (Jetson TK1) # tftpboot 0x82000000 tegra124-jetson-tk1.dtb
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+Filename 'tegra124-jetson-tk1.dtb'.
+Load address: 0x82000000
+Loading: *####
+	 2.6 MiB/s
+done
+Bytes transferred = 49059 (bfa3 hex)
+Tegra124 (Jetson TK1) # bootz 0x81000000 - 0x82000000
+Kernel image @ 0x81000000 [ 0x000000 - 0x49a130 ]
+## Flattened Device Tree blob at 82000000
+   Booting using the fdt blob at 0x82000000
+   Using Device Tree in place at 82000000, end 8200efa2
+
+Starting kernel ...
+
+Uncompressing Linux... done, booting the kernel.
+Booting Linux on physical CPU 0x0
+Initializing cgroup subsys cpu
+Initializing cgroup subsys cpuacct
+Linux version 4.0.0-rc1-128710-gc517d83 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Mar 2 14:39:56 PST 2015
+CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
+CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
+Machine model: NVIDIA Tegra124 Jetson TK1
+debug: ignoring loglevel setting.
+cma: Reserved 64 MiB at 0xfbc00000
+Memory policy: Data cache writealloc
+On node 0 totalpages: 524032
+free_area_init_node: node 0, pgdat c0943c80, node_mem_map ee7f7000
+  Normal zone: 1520 pages used for memmap
+  Normal zone: 0 pages reserved
+  Normal zone: 194560 pages, LIFO batch:31
+  HighMem zone: 329472 pages, LIFO batch:31
+PERCPU: Embedded 11 pages/cpu @ee799000 s12672 r8192 d24192 u45056
+pcpu-alloc: s12672 r8192 d24192 u45056 alloc=11*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
+PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 2003136K/2096128K available (6609K kernel code, 317K rwdata, 2228K rodata, 304K init, 351K bss, 27456K reserved, 65536K cma-reserved, 1252352K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0008000 - 0xc08a9bf8   (8839 kB)
+      .init : 0xc08aa000 - 0xc08f6000   ( 304 kB)
+      .data : 0xc08f6000 - 0xc09457a0   ( 318 kB)
+       .bss : 0xc09457a0 - 0xc099d3b0   ( 352 kB)
+Preemptible hierarchical RCU implementation.
+	Additional per-CPU info printed with stalls.
+NR_IRQS:16 nr_irqs:16 16
+L2C: failed to init: -19
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+Switching to timer-based delay loop, resolution 1000ns
+Architected cp15 timer(s) running at 12.00MHz (virt).
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
+Switching to timer-based delay loop, resolution 83ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Initializing cgroup subsys freezer
+Initializing cgroup subsys debug
+CPU: Testing write buffer coherency: ok
+/cpus/cpu@0 missing clock-frequency property
+/cpus/cpu@1 missing clock-frequency property
+/cpus/cpu@2 missing clock-frequency property
+/cpus/cpu@3 missing clock-frequency property
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x80643760 - 0x806437f8
+Tegra Revision: A01 SKU: 129 CPU Process: 1 Core Process: 1
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+Brought up 4 CPUs
+SMP: Total of 4 processors activated (96.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor ladder
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 8 bytes.
++5V_SYS: supplied by +VDD_MUX
++3.3V_SYS: supplied by +VDD_MUX
+platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@4: Failed to find supply vin
+reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
+platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
++USB0_VBUS_SW: Failed to request enable GPIO108: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
+platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
++5V_USB_HS: Failed to request enable GPIO109: -517
+reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
+platform regulators:regulator@8: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@10: Driver reg-fixed-voltage requests probe deferral
++1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517
+reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
+platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral
++5V_HDMI_CON: Failed to request enable GPIO86: -517
+reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517
+platform regulators:regulator@12: Driver reg-fixed-voltage requests probe deferral
++5V_SATA: Failed to request enable GPIO242: -517
+reg-fixed-voltage regulators:regulator@13: Failed to register regulator: -517
+platform regulators:regulator@13: Driver reg-fixed-voltage requests probe deferral
++12V_SATA: Failed to request enable GPIO242: -517
+reg-fixed-voltage regulators:regulator@14: Failed to register regulator: -517
+platform regulators:regulator@14: Driver reg-fixed-voltage requests probe deferral
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+Linux video capture interface: v2.00
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+Advanced Linux Sound Architecture Driver Initialized.
+Bluetooth: Core ver 2.20
+NET: Registered protocol family 31
+Bluetooth: HCI device and connection manager initialized
+Bluetooth: HCI socket layer initialized
+Bluetooth: L2CAP socket layer initialized
+Bluetooth: SCO socket layer initialized
+cfg80211: Calling CRDA to update world regulatory domain
+Switched to clocksource arch_sys_counter
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+TCP: reno registered
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+bounce: pool size: 64 pages
+io scheduler noop registered (default)
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+platform 1003000.pcie-controller: Driver tegra-pcie requests probe deferral
+tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: emergency thermal reset enabled
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+console [ttyS0] disabled
+70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 330, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+[drm] Initialized drm 1.1.0 20060810
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+loop: module loaded
+at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
+as3722 4-0040: AS3722 with revision 0x1 found
++1.35V_LP0(sd2): supplied by +5V_SYS
++1.35V_LP0(sd3): supplied by +5V_SYS
++1.05V_RUN: supplied by +5V_SYS
++1.8V_VDDIO: supplied by +5V_SYS
++1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
+as3722-regulator as3722-regulator: Failed to find supply vin-ldo1-6
+as3722-regulator as3722-regulator: regulator 8 register failed -517
+platform as3722-regulator: Driver as3722-regulator requests probe deferral
+tegra-ahci 70027000.sata: Failed to get supply 'avdd': -517
+tegra-ahci 70027000.sata: Failed to get regulators
+platform 70027000.sata: Driver tegra-ahci requests probe deferral
+m25p80 spi32765.0: w25q32dw (4096 Kbytes)
+CAN device driver interface
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+tegra-ehci: Tegra EHCI driver
+platform 7d004000.usb: Driver tegra-ehci requests probe deferral
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+usbcore: registered new interface driver cdc_acm
+cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
+usbcore: registered new interface driver cdc_wdm
+usbcore: registered new interface driver usb-storage
+tegra-phy 7d004000.usb-phy: no vbus regulator
+platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
+mousedev: PS/2 mouse device common for all mice
+as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
+as3722-rtc as3722-rtc: RTC interrupt 364
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+usbcore: registered new interface driver uvcvideo
+USB Video Class driver (1.1.1)
+gspca_main: v2.14.0 registered
+0-004c supply vcc not found, using dummy regulator
+Driver 'mmcblk' needs updating - please use bus_type methods
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc0: Unknown controller version (3). You may experience problems.
+sdhci-tegra 700b0400.sdhci: No vmmc regulator found
+platform 700b0400.sdhci: Driver sdhci-tegra requests probe deferral
+mmc0: Unknown controller version (3). You may experience problems.
+sdhci-tegra 700b0600.sdhci: No vmmc regulator found
+sdhci-tegra 700b0600.sdhci: No vqmmc regulator found
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+mmc0: MAN_BKOPS_EN bit is not set
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 SEM16G 14.6 GiB 
+mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB
+mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
+Primary GPT is invalid, using alternate GPT.
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
+tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
+tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok
+input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card0/input0
+TCP: cubic registered
+NET: Registered protocol family 10
+mip6: Mobile IPv6
+sit: IPv6 over IPv4 tunneling driver
+NET: Registered protocol family 17
+NET: Registered protocol family 15
+can: controller area network core (rev 20120528 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20120528)
+can: broadcast manager protocol (rev 20120528 t)
+can: netlink gateway (rev 20130117) max_hops=1
+Bluetooth: RFCOMM socket layer initialized
+Bluetooth: RFCOMM ver 1.11
+Bluetooth: BNEP (Ethernet Emulation) ver 1.3
+Bluetooth: BNEP socket layer initialized
+Bluetooth: HIDP (Human Interface Emulation) ver 1.2
+Bluetooth: HIDP socket layer initialized
+Registering SWP/SWPB emulation handler
++3.3V_RUN: supplied by +3.3V_SYS
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
++USB0_VBUS_SW: supplied by +5V_SYS
++5V_USB_HS: supplied by +5V_SYS
++3.3V_LP0: supplied by +3.3V_SYS
+reg-fixed-voltage regulators:regulator@11: Failed to find supply vin
+reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
+platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral
++5V_HDMI_CON: supplied by +5V_SYS
++5V_SATA: supplied by +5V_SYS
++12V_SATA: supplied by +VDD_MUX
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
+platform 1003000.pcie-controller: Driver tegra-pcie requests probe deferral
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
++1.35V_LP0(sd2): supplied by +5V_SYS
++1.35V_LP0(sd3): supplied by +5V_SYS
++1.05V_RUN: supplied by +5V_SYS
++1.8V_VDDIO: supplied by +5V_SYS
++1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
++1.8V_RUN_CAM: supplied by +3.3V_RUN
++1.2V_GEN_AVDD: supplied by +1.8V_VDDIO
++1.05V_LP0_VDD_RTC: supplied by +3.3V_SYS
++2.8V_RUN_CAM: supplied by +3.3V_SYS
++1.2V_RUN_CAM_FRONT: supplied by +1.8V_VDDIO
++VDDIO_SDMMC3: supplied by +3.3V_RUN
++1.05V_RUN_CAM_REAR: supplied by +1.8V_VDDIO
++3.3V_RUN_TOUCH: supplied by +5V_SYS
++2.8V_RUN_CAM_AF: supplied by +5V_SYS
++1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
+tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
+tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
+scsi host0: tegra-ahci
+scsi host1: tegra-ahci
+ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 340
+ata2: DUMMY
+tegra-ehci 7d004000.usb: EHCI Host Controller
+tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d004000.usb: irq 345, io mem 0x7d004000
+tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+sdhci-tegra 700b0400.sdhci: Got CD GPIO
+sdhci-tegra 700b0400.sdhci: Got WP GPIO
+mmc1: Unknown controller version (3). You may experience problems.
+sdhci-tegra 700b0400.sdhci: No vmmc regulator found
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
++1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
+tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
+tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
+tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000008
+ata1: SATA link down (SStatus 0 SControl 300)
+tegra-pcie 1003000.pcie-controller: link 0 down, retrying
+tegra-pcie 1003000.pcie-controller: link 0 down, retrying
+tegra-pcie 1003000.pcie-controller: link 0 down, retrying
+tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
+tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
+tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
+tegra-pcie 1003000.pcie-controller: link 1 down, retrying
+tegra-pcie 1003000.pcie-controller: link 1 down, retrying
+tegra-pcie 1003000.pcie-controller: link 1 down, retrying
+tegra-pcie 1003000.pcie-controller: link 1 down, ignoring
+tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
+pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
+pci_bus 0000:00: root bus resource [bus 00-ff]
+pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
+PCI: bus0: Fast back to back transfers enabled
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+drm drm: No connectors reported connected with modes
+[drm] Cannot find any crtc or sizes - going 1024x768
+Console: switching to colour frame buffer device 128x48
+drm drm: fb0:  frame buffer device
+drm drm: registered panic notifier
+[drm] Initialized tegra 0.0.0 20120330 on minor 0
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci 7d008000.usb: irq 346, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+input: gpio-keys as /devices/soc0/gpio-keys/input/input1
+as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218)
++1.8V_RUN_VPP_FUSE: disabling
++2.8V_RUN_CAM_AF: disabling
++3.3V_RUN_TOUCH: disabling
++1.05V_RUN_CAM_REAR: disabling
++1.2V_RUN_CAM_FRONT: disabling
++2.8V_RUN_CAM: disabling
++1.8V_RUN_CAM: disabling
++USB0_VBUS_SW: disabling
+ALSA device list:
+  #0: NVIDIA Tegra Jetson TK1
+EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
+EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (244)
+EXT4-fs (mmcblk0p1): recovery complete
+EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 304K (c08aa000 - c08f6000)
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    5.862332] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	1969-12-31 16:00:00.000000000 -0800
+++ /tmp/foob	2015-03-02 14:46:48.869140200 -0800
@@ -0,0 +1,388 @@
+
+U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18)
+
+
+U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18)
+
+TEGRA30
+Board: NVIDIA Beaver
+I2C:   ready
+DRAM:  2 GiB
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+In:    serial
+Out:   serial
+Err:   serial
+Net:   Net Initialization Skipped
+No ethernet found.
+Hit any key to stop autoboot:  2  0 
+Tegra30 (Beaver) # 
+Tegra30 (Beaver) # usb reset
+(Re)start USB...
+USB0:   USB EHCI 1.00
+scanning bus 0 for devices... 2 USB Device(s) found
+       scanning usb for storage devices... 0 Storage Device(s) found
+       scanning usb for ethernet devices... 
+Warning: asx0 using MAC address from net device
+1 Ethernet Device(s) found
+Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd'
+Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra30 (Beaver) # tftpboot 0x81000000 zImage.multi_v7_defconfig
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.101
+Filename 'zImage.multi_v7_defconfig'.
+Load address: 0x81000000
+Loading: *#################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 ########
+	 3.5 MiB/s
+done
+Bytes transferred = 5842632 (5926c8 hex)
+Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.101
+Filename 'tegra30-beaver.dtb'.
+Load address: 0x82000000
+Loading: *##
+	 2.9 MiB/s
+done
+Bytes transferred = 24641 (6041 hex)
+Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
+Kernel image @ 0x81000000 [ 0x000000 - 0x5926c8 ]
+## Flattened Device Tree blob at 82000000
+   Booting using the fdt blob at 0x82000000
+   Loading Device Tree to 8fff6000, end 8ffff040 ... OK
+
+Starting kernel ...
+
+Booting Linux on physical CPU 0x0
+Linux version 4.0.0-rc1-23494-gc517d83 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Mar 2 14:40:36 PST 2015
+CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
+CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
+Machine model: NVIDIA Tegra30 Beaver evaluation board
+debug: ignoring loglevel setting.
+cma: Reserved 64 MiB at 0xfb800000
+Memory policy: Data cache writealloc
+On node 0 totalpages: 524032
+free_area_init_node: node 0, pgdat c0e34ac0, node_mem_map ee7f8000
+  DMA zone: 1520 pages used for memmap
+  DMA zone: 0 pages reserved
+  DMA zone: 194560 pages, LIFO batch:31
+  HighMem zone: 329472 pages, LIFO batch:31
+PERCPU: Embedded 11 pages/cpu @ee7b1000 s12480 r8192 d24384 u45056
+pcpu-alloc: s12480 r8192 d24384 u45056 alloc=11*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
+PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 2000288K/2096128K available (7602K kernel code, 922K rwdata, 3168K rodata, 780K init, 307K bss, 30304K reserved, 65536K cma-reserved, 1252352K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0208000 - 0xc0c8cb18   (10771 kB)
+      .init : 0xc0c8d000 - 0xc0d50000   ( 780 kB)
+      .data : 0xc0d50000 - 0xc0e36a20   ( 923 kB)
+       .bss : 0xc0e36a20 - 0xc0e838e8   ( 308 kB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+Hierarchical RCU implementation.
+	Additional per-CPU info printed with stalls.
+	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+NR_IRQS:16 nr_irqs:16 16
+L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C-310 erratum 769419 enabled
+L2C-310 enabling early BRESP for Cortex-A9
+L2C-310: enabling full line of zeros but not enabled in Cortex-A9
+L2C-310 ID prefetch enabled, offset 1 lines
+L2C-310 dynamic clock gating enabled, standby mode enabled
+L2C-310 cache controller enabled, 8 ways, 1024 kB
+L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e480001
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+Switching to timer-based delay loop, resolution 1000ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=5000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+CPU: Testing write buffer coherency: ok
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x8092fc90 - 0x8092fd28
+Tegra Revision: A03 SKU: 128 CPU Process: 4 Core Process: 0
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+Brought up 4 CPUs
+SMP: Total of 4 processors activated (8.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor ladder
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 4 bytes.
+Serial: AMBA PL011 UART driver
+platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@2: Driver reg-fixed-voltage requests probe deferral
+vdd_5v_sata: Failed to request enable GPIO30: -517
+reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
+platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
+usb1_vbus: Failed to request enable GPIO238: -517
+reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
+platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
+usb3_vbus: Failed to request enable GPIO236: -517
+reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
+platform regulators:regulator@5: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@6: Driver reg-fixed-voltage requests probe deferral
+sys_3v3_pexs: Failed to request enable GPIO95: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
+platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@8: Failed to find supply vin
+reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
+platform regulators:regulator@8: Driver reg-fixed-voltage requests probe deferral
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+vrtc: supplied by vdd_5v_in
+vdd_1v8_gen: supplied by vdd_5v_in
+vddio_ddr_1v2: supplied by vdd_5v_in
+vdd_1v5_gen: supplied by vdd_5v_in
+vdd_pexa,vdd_pexb: supplied by vdd_1v5_gen
+vdd_sata,avdd_plle: supplied by vdd_1v5_gen
+ldo3: supplied by vdd_5v_in
+vdd_rtc: supplied by vdd_5v_in
+vddio_sdmmc,avdd_vdac: supplied by vdd_5v_in
+avdd_dsi_csi,pwrdet_mipi: supplied by vdd_1v8_gen
+vdd_pllm,x,u,a_p_c_s: supplied by vdd_1v8_gen
+vdd_ddr_hs: supplied by vdd_1v8_gen
+Linux video capture interface: v2.00
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+EDAC MC: Ver: 3.0.0
+Advanced Linux Sound Architecture Driver Initialized.
+Switched to clocksource timer_us
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+TCP: reno registered
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+ntfs: driver 2.1.31 [Flags: R/O].
+bounce: pool size: 64 pages
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
+io scheduler noop registered
+io scheduler deadline registered
+io scheduler cfq registered (default)
+tegra-pcie 3000.pcie-controller: 2x3 configuration
+tegra-pcie 3000.pcie-controller: Failed to get supply 'hvdd-pex': -517
+platform 3000.pcie-controller: Driver tegra-pcie requests probe deferral
+tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+msm_serial: driver initialized
+console [ttyS0] disabled
+70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+STMicroelectronics ASC driver initialized
+[drm] Initialized drm 1.1.0 20060810
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+loop: module loaded
+m25p80 spi32766.1: w25q32 (4096 Kbytes)
+CAN device driver interface
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-omap: OMAP-EHCI Host Controller driver
+ehci-orion: EHCI orion driver
+SPEAr-ehci: EHCI SPEAr driver
+ehci-st: EHCI STMicroelectronics driver
+ehci-exynos: EHCI EXYNOS driver
+tegra-ehci: Tegra EHCI driver
+platform 7d004000.usb: Driver tegra-ehci requests probe deferral
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-omap3: OHCI OMAP3 driver
+SPEAr-ohci: OHCI SPEAr driver
+ohci-st: OHCI STMicroelectronics driver
+usbcore: registered new interface driver usb-storage
+platform 7d004000.usb-phy: Driver tegra-phy requests probe deferral
+platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
+mousedev: PS/2 mouse device common for all mice
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
+i2c /dev entries driver
+usbcore: registered new interface driver uvcvideo
+USB Video Class driver (1.1.1)
+gspca_main: v2.14.0 registered
+Driver 'mmcblk' needs updating - please use bus_type methods
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 78000000.sdhci: Got CD GPIO
+sdhci-tegra 78000000.sdhci: Got WP GPIO
+sdhci-tegra 78000000.sdhci: No vmmc regulator found
+sdhci-tegra 78000000.sdhci: No vqmmc regulator found
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA
+sdhci-tegra 78000600.sdhci: No vmmc regulator found
+sdhci-tegra 78000600.sdhci: No vqmmc regulator found
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
+ledtrig-cpu: registered to indicate activity on CPUs
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+usbcore: registered new interface driver snd-usb-audio
+mmc1: new high speed MMC card at address 0001
+mmcblk0: mmc1:0001 SEM16G 14.8 GiB 
+mmcblk0boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
+mmcblk0boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
+mmcblk0rpmb: mmc1:0001 SEM16G partition 3 128 KiB
+Primary GPT is invalid, using alternate GPT.
+ mmcblk0: p1 p2 p3 p4 p5
+tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
+tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
+input: NVIDIA Tegra Beaver Headphones as /devices/soc0/sound/sound/card0/input0
+TCP: cubic registered
+NET: Registered protocol family 17
+can: controller area network core (rev 20120528 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20120528)
+can: broadcast manager protocol (rev 20120528 t)
+can: netlink gateway (rev 20130117) max_hops=1
+Key type dns_resolver registered
+ThumbEE CPU extension supported.
+Registering SWP/SWPB emulation handler
+vdd_ddr: supplied by vdd_5v_in
+vdd_5v_sata: supplied by vdd_5v_in
+usb1_vbus: supplied by vdd_5v_in
+usb3_vbus: supplied by vdd_5v_in
+sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
+sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
++VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
+tegra-pcie 3000.pcie-controller: 2x3 configuration
+tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
+tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
+tegra-pcie 3000.pcie-controller: link 2 down, retrying
+tegra-pcie 3000.pcie-controller: link 2 down, retrying
+tegra-pcie 3000.pcie-controller: link 2 down, retrying
+tegra-pcie 3000.pcie-controller: link 2 down, ignoring
+tegra-pcie 3000.pcie-controller: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff]
+pci_bus 0000:00: root bus resource [mem 0x28000000-0x3fffffff pref]
+pci_bus 0000:00: root bus resource [bus 00-ff]
+pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
+pci 0000:00:01.0: [10de:0e1c] type 01 class 0x060400
+pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
+PCI: bus0: Fast back to back transfers disabled
+pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
+pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
+pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
+pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:01:00.0: supports D1 D2
+pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+PCI: bus1: Fast back to back transfers disabled
+pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
+pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref]
+pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
+pci 0000:01:00.0: BAR 4: assigned [mem 0x28000000-0x28003fff 64bit pref]
+pci 0000:01:00.0: BAR 2: assigned [mem 0x28004000-0x28004fff 64bit pref]
+pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
+pci 0000:00:01.0: PCI bridge to [bus 01]
+pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
+pci 0000:00:01.0:   bridge window [mem 0x28000000-0x280fffff 64bit pref]
+pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:01.0: enabling device (0140 -> 0143)
+pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
+pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
+pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
+r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
+r8169 0000:01:00.0: enabling device (0140 -> 0143)
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf00e8000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
+r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+drm drm: No connectors reported connected with modes
+[drm] Cannot find any crtc or sizes - going 1024x768
+Console: switching to colour frame buffer device 128x48
+drm drm: fb0:  frame buffer device
+drm drm: registered panic notifier
+[drm] Initialized tegra 0.0.0 20120330 on minor 0
+platform 7d004000.usb: Driver tegra-ehci requests probe deferral
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+utmi_phy_clk_enable: timeout waiting for phy to stabilize
+tegra-ehci 7d004000.usb: EHCI Host Controller
+tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000
+tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
+usb1_vbus: disabling
+vdd_sata,avdd_plle: disabling
+ALSA device list:
+  #0: NVIDIA Tegra Beaver
+EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
+EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended
+EXT4-fs (mmcblk0p1): recovery complete
+EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext3 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 780K (c0c8d000 - c0d50000)
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    4.193114] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	1969-12-31 16:00:00.000000000 -0800
+++ /tmp/foob	2015-03-02 14:46:48.873140195 -0800
@@ -0,0 +1,382 @@
+
+U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18)
+
+
+U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18)
+
+TEGRA30
+Board: NVIDIA Beaver
+I2C:   ready
+DRAM:  2 GiB
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+In:    serial
+Out:   serial
+Err:   serial
+Net:   Net Initialization Skipped
+No ethernet found.
+Hit any key to stop autoboot:  2  0 
+Tegra30 (Beaver) # 
+Tegra30 (Beaver) # usb reset
+(Re)start USB...
+USB0:   USB EHCI 1.00
+scanning bus 0 for devices... 2 USB Device(s) found
+       scanning usb for storage devices... 0 Storage Device(s) found
+       scanning usb for ethernet devices... 
+Warning: asx0 using MAC address from net device
+1 Ethernet Device(s) found
+Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd'
+Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra30 (Beaver) # tftpboot 0x81000000 zImage.tegra_defconfig
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.101
+Filename 'zImage.tegra_defconfig'.
+Load address: 0x81000000
+Loading: *#################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 ####
+	 2.8 MiB/s
+done
+Bytes transferred = 4825392 (49a130 hex)
+Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.101
+Filename 'tegra30-beaver.dtb'.
+Load address: 0x82000000
+Loading: *##
+	 2.6 MiB/s
+done
+Bytes transferred = 24641 (6041 hex)
+Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
+Kernel image @ 0x81000000 [ 0x000000 - 0x49a130 ]
+## Flattened Device Tree blob at 82000000
+   Booting using the fdt blob at 0x82000000
+   Loading Device Tree to 8fff6000, end 8ffff040 ... OK
+
+Starting kernel ...
+
+Uncompressing Linux... done, booting the kernel.
+Booting Linux on physical CPU 0x0
+Initializing cgroup subsys cpu
+Initializing cgroup subsys cpuacct
+Linux version 4.0.0-rc1-128710-gc517d83 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Mar 2 14:39:56 PST 2015
+CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
+CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
+Machine model: NVIDIA Tegra30 Beaver evaluation board
+debug: ignoring loglevel setting.
+cma: Reserved 64 MiB at 0xfbc00000
+Memory policy: Data cache writealloc
+On node 0 totalpages: 524032
+free_area_init_node: node 0, pgdat c0943c80, node_mem_map ee7f7000
+  Normal zone: 1520 pages used for memmap
+  Normal zone: 0 pages reserved
+  Normal zone: 194560 pages, LIFO batch:31
+  HighMem zone: 329472 pages, LIFO batch:31
+PERCPU: Embedded 11 pages/cpu @ee7b0000 s12672 r8192 d24192 u45056
+pcpu-alloc: s12672 r8192 d24192 u45056 alloc=11*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
+PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 2003252K/2096128K available (6609K kernel code, 317K rwdata, 2228K rodata, 304K init, 351K bss, 27340K reserved, 65536K cma-reserved, 1252352K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0008000 - 0xc08a9bf8   (8839 kB)
+      .init : 0xc08aa000 - 0xc08f6000   ( 304 kB)
+      .data : 0xc08f6000 - 0xc09457a0   ( 318 kB)
+       .bss : 0xc09457a0 - 0xc099d3b0   ( 352 kB)
+Preemptible hierarchical RCU implementation.
+	Additional per-CPU info printed with stalls.
+NR_IRQS:16 nr_irqs:16 16
+L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C-310 erratum 769419 enabled
+L2C-310 enabling early BRESP for Cortex-A9
+L2C-310: enabling full line of zeros but not enabled in Cortex-A9
+L2C-310 ID prefetch enabled, offset 1 lines
+L2C-310 dynamic clock gating enabled, standby mode enabled
+L2C-310 cache controller enabled, 8 ways, 1024 kB
+L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e480001
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+Switching to timer-based delay loop, resolution 1000ns
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Initializing cgroup subsys freezer
+Initializing cgroup subsys debug
+CPU: Testing write buffer coherency: ok
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x80643760 - 0x806437f8
+Tegra Revision: A03 SKU: 128 CPU Process: 4 Core Process: 0
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+Brought up 4 CPUs
+SMP: Total of 4 processors activated (8.00 BogoMIPS).
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
+pinctrl core: initialized pinctrl subsystem
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor ladder
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 4 bytes.
+platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@2: Driver reg-fixed-voltage requests probe deferral
+vdd_5v_sata: Failed to request enable GPIO30: -517
+reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
+platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
+usb1_vbus: Failed to request enable GPIO238: -517
+reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
+platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
+usb3_vbus: Failed to request enable GPIO236: -517
+reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
+platform regulators:regulator@5: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@6: Driver reg-fixed-voltage requests probe deferral
+sys_3v3_pexs: Failed to request enable GPIO95: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
+platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@8: Failed to find supply vin
+reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
+platform regulators:regulator@8: Driver reg-fixed-voltage requests probe deferral
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+vrtc: supplied by vdd_5v_in
+vdd_1v8_gen: supplied by vdd_5v_in
+vddio_ddr_1v2: supplied by vdd_5v_in
+vdd_1v5_gen: supplied by vdd_5v_in
+vdd_pexa,vdd_pexb: supplied by vdd_1v5_gen
+vdd_sata,avdd_plle: supplied by vdd_1v5_gen
+ldo3: supplied by vdd_5v_in
+vdd_rtc: supplied by vdd_5v_in
+vddio_sdmmc,avdd_vdac: supplied by vdd_5v_in
+avdd_dsi_csi,pwrdet_mipi: supplied by vdd_1v8_gen
+vdd_pllm,x,u,a_p_c_s: supplied by vdd_1v8_gen
+vdd_ddr_hs: supplied by vdd_1v8_gen
+Linux video capture interface: v2.00
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+Advanced Linux Sound Architecture Driver Initialized.
+Bluetooth: Core ver 2.20
+NET: Registered protocol family 31
+Bluetooth: HCI device and connection manager initialized
+Bluetooth: HCI socket layer initialized
+Bluetooth: L2CAP socket layer initialized
+Bluetooth: SCO socket layer initialized
+cfg80211: Calling CRDA to update world regulatory domain
+Switched to clocksource timer_us
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+TCP: reno registered
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+bounce: pool size: 64 pages
+io scheduler noop registered (default)
+tegra-pcie 3000.pcie-controller: 2x3 configuration
+tegra-pcie 3000.pcie-controller: Failed to get supply 'hvdd-pex': -517
+platform 3000.pcie-controller: Driver tegra-pcie requests probe deferral
+tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
+tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+console [ttyS0] disabled
+70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+[drm] Initialized drm 1.1.0 20060810
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+loop: module loaded
+m25p80 spi32766.1: w25q32 (4096 Kbytes)
+CAN device driver interface
+igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
+igb: Copyright (c) 2007-2014 Intel Corporation.
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+tegra-ehci: Tegra EHCI driver
+platform 7d004000.usb: Driver tegra-ehci requests probe deferral
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+usbcore: registered new interface driver cdc_acm
+cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
+usbcore: registered new interface driver cdc_wdm
+usbcore: registered new interface driver usb-storage
+platform 7d004000.usb-phy: Driver tegra-phy requests probe deferral
+platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
+mousedev: PS/2 mouse device common for all mice
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
+i2c /dev entries driver
+usbcore: registered new interface driver uvcvideo
+USB Video Class driver (1.1.1)
+gspca_main: v2.14.0 registered
+Driver 'mmcblk' needs updating - please use bus_type methods
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 78000000.sdhci: Got CD GPIO
+sdhci-tegra 78000000.sdhci: Got WP GPIO
+sdhci-tegra 78000000.sdhci: No vmmc regulator found
+sdhci-tegra 78000000.sdhci: No vqmmc regulator found
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA
+sdhci-tegra 78000600.sdhci: No vmmc regulator found
+sdhci-tegra 78000600.sdhci: No vqmmc regulator found
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+mmc1: new high speed MMC card at address 0001
+mmcblk0: mmc1:0001 SEM16G 14.8 GiB 
+mmcblk0boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
+mmcblk0boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
+mmcblk0rpmb: mmc1:0001 SEM16G partition 3 128 KiB
+Primary GPT is invalid, using alternate GPT.
+ mmcblk0: p1 p2 p3 p4 p5
+tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
+tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
+input: NVIDIA Tegra Beaver Headphones as /devices/soc0/sound/sound/card0/input0
+TCP: cubic registered
+NET: Registered protocol family 10
+mip6: Mobile IPv6
+sit: IPv6 over IPv4 tunneling driver
+NET: Registered protocol family 17
+NET: Registered protocol family 15
+can: controller area network core (rev 20120528 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20120528)
+can: broadcast manager protocol (rev 20120528 t)
+can: netlink gateway (rev 20130117) max_hops=1
+Bluetooth: RFCOMM socket layer initialized
+Bluetooth: RFCOMM ver 1.11
+Bluetooth: BNEP (Ethernet Emulation) ver 1.3
+Bluetooth: BNEP socket layer initialized
+Bluetooth: HIDP (Human Interface Emulation) ver 1.2
+Bluetooth: HIDP socket layer initialized
+Registering SWP/SWPB emulation handler
+vdd_ddr: supplied by vdd_5v_in
+vdd_5v_sata: supplied by vdd_5v_in
+usb1_vbus: supplied by vdd_5v_in
+usb3_vbus: supplied by vdd_5v_in
+sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
+sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
++VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
+tegra-pcie 3000.pcie-controller: 2x3 configuration
+tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
+tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
+tegra-pcie 3000.pcie-controller: link 2 down, retrying
+tegra-pcie 3000.pcie-controller: link 2 down, retrying
+tegra-pcie 3000.pcie-controller: link 2 down, retrying
+tegra-pcie 3000.pcie-controller: link 2 down, ignoring
+tegra-pcie 3000.pcie-controller: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff]
+pci_bus 0000:00: root bus resource [mem 0x28000000-0x3fffffff pref]
+pci_bus 0000:00: root bus resource [bus 00-ff]
+pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
+pci 0000:00:01.0: [10de:0e1c] type 01 class 0x060400
+pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
+PCI: bus0: Fast back to back transfers disabled
+pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
+pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
+pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
+pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:01:00.0: supports D1 D2
+pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+PCI: bus1: Fast back to back transfers disabled
+pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
+pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref]
+pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
+pci 0000:01:00.0: BAR 4: assigned [mem 0x28000000-0x28003fff 64bit pref]
+pci 0000:01:00.0: BAR 2: assigned [mem 0x28004000-0x28004fff 64bit pref]
+pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
+pci 0000:00:01.0: PCI bridge to [bus 01]
+pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
+pci 0000:00:01.0:   bridge window [mem 0x28000000-0x280fffff 64bit pref]
+pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:01.0: enabling device (0140 -> 0143)
+pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
+pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
+pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
+r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
+r8169 0000:01:00.0: enabling device (0140 -> 0143)
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf00b6000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
+r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+drm drm: No connectors reported connected with modes
+[drm] Cannot find any crtc or sizes - going 1024x768
+Console: switching to colour frame buffer device 128x48
+drm drm: fb0:  frame buffer device
+drm drm: registered panic notifier
+[drm] Initialized tegra 0.0.0 20120330 on minor 0
+platform 7d004000.usb: Driver tegra-ehci requests probe deferral
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+utmi_phy_clk_enable: timeout waiting for phy to stabilize
+tegra-ehci 7d004000.usb: EHCI Host Controller
+tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000
+tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
+usb1_vbus: disabling
+vdd_sata,avdd_plle: disabling
+ALSA device list:
+  #0: NVIDIA Tegra Beaver
+EXT3-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended
+kjournald starting.  Commit interval 5 seconds
+EXT3-fs (mmcblk0p1): using internal journal
+EXT3-fs (mmcblk0p1): recovery complete
+EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
+VFS: Mounted root (ext3 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 304K (c08aa000 - c08f6000)
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    4.456033] usb 2-1: new high-speed USB device number 2 using tegra-ehci
