Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2015-01-08 01:49:05.996856435 -0800
+++ /tmp/foob	2015-01-08 01:49:06.000856480 -0800
@@ -36,10 +36,11 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #####################################
-	 3.1 MiB/s
+	 #################################################################
+	 ##
+	 2.8 MiB/s
 done
-Bytes transferred = 5306480 (50f870 hex)
+Bytes transferred = 5739968 (5795c0 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
@@ -48,17 +49,17 @@
 Loading: *###
 	 2.5 MiB/s
 done
-Bytes transferred = 34650 (875a hex)
+Bytes transferred = 34638 (874e hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x50f870 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5795c0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff4000, end 8ffff759 ... OK
+   Loading Device Tree to 8fff4000, end 8ffff74d ... OK
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 3.18.0-00251-gb2776bf (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Dec 8 12:24:31 PST 2014
+Linux version 3.19.0-rc1-12393-g97bf6af (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jan 8 01:44:03 PST 2015
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
@@ -66,11 +67,10 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0d1ef40, node_mem_map ee7f8000
+free_area_init_node: node 0, pgdat c0dfa680, node_mem_map ee7f8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
-  HighMem zone: 2574 pages used for memmap
   HighMem zone: 329472 pages, LIFO batch:31
 PERCPU: Embedded 10 pages/cpu @ee7ab000 s8512 r8192 d24256 u40960
 pcpu-alloc: s8512 r8192 d24256 u40960 alloc=10*4096
@@ -80,18 +80,18 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2001364K/2096128K available (6858K kernel code, 963K rwdata, 2812K rodata, 728K init, 308K bss, 94764K reserved, 1252352K highmem)
+Memory: 2000492K/2096128K available (7469K kernel code, 953K rwdata, 3048K rodata, 768K init, 306K bss, 30100K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
-    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0b79de4   (9672 kB)
-      .init : 0xc0b7a000 - 0xc0c30000   ( 728 kB)
-      .data : 0xc0c30000 - 0xc0d20dc0   ( 964 kB)
-       .bss : 0xc0d20dc0 - 0xc0d6e068   ( 309 kB)
+      .text : 0xc0208000 - 0xc0c4d79c   (10518 kB)
+      .init : 0xc0c4e000 - 0xc0d0e000   ( 768 kB)
+      .data : 0xc0d0e000 - 0xc0dfc560   ( 954 kB)
+       .bss : 0xc0dfc560 - 0xc0e48ea8   ( 307 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
@@ -114,21 +114,16 @@
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x8087aba8 - 0x8087ac40
+Setting up static identity map for 0x8090f2f8 - 0x8090f390
 Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 0
-CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
-CPU2: Booted secondary processor
 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
-CPU3: Booted secondary processor
 CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
 Brought up 4 CPUs
-SMP: Total of 4 processors activated.
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
 pinctrl core: initialized pinctrl subsystem
-regulator-dummy: no parameters
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
 cpuidle: using governor ladder
@@ -136,9 +131,7 @@
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 8 bytes.
-EXYNOS: PMU not supported
 Serial: AMBA PL011 UART driver
-vdd_ac_bat: 5000 mV 
 dvdd_ts: Failed to request enable GPIO61: -517
 reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517
 platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral
@@ -148,7 +141,6 @@
 usb2_vbus: Failed to request enable GPIO86: -517
 reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
 platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
-vdd_hdmi_5v0: 5000 mV 
 reg-fixed-voltage regulators:regulator@5: Failed to find supply vin
 reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
 platform regulators:regulator@5: Driver reg-fixed-voltage requests probe deferral
@@ -162,82 +154,44 @@
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
-vdd-cpu: 500 <--> 1520 mV at 1100 mV 
 tps65090 2-0048: No cache defaults, reading back from HW
-vdd-sys-5v0: at 5000 mV 
 vdd-sys-5v0: supplied by vdd_ac_bat
-vdd-sys-3v3: at 3300 mV 
 vdd-sys-3v3: supplied by vdd_ac_bat
-vdd-ao: no parameters
 vdd-ao: supplied by vdd_ac_bat
-vdd-lcd-bl: no parameters
 vdd-lcd-bl: supplied by vdd_ac_bat
-TPS65090_RAILSFET2: no parameters
 TPS65090_RAILSFET2: supplied by vdd_ac_bat
-vdd-modem-3v3: no parameters
 vdd-modem-3v3: supplied by vdd-sys-3v3
-avdd-lcd: no parameters
 avdd-lcd: supplied by vdd-sys-3v3
-vdd-lvds: no parameters
 vdd-lvds: supplied by vdd-sys-3v3
-vdd-sd-slot: no parameters
 vdd-sd-slot: supplied by vdd-sys-3v3
-vdd-com-3v3: no parameters
 vdd-com-3v3: supplied by vdd-sys-3v3
-vdd-sby-5v0: at 5000 mV 
 vdd-sby-5v0: supplied by vdd_ac_bat
-vdd-sby-3v3: at 3300 mV 
 vdd-sby-3v3: supplied by vdd_ac_bat
-genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0x98)
+genirq: Setting trigger mode 8 for irq 341 failed (gic_set_type+0x0/0x98)
 palmas 2-0058: Irq flag is 0x00000000
 palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
-vddio-ddr: 1350 mV 
 vddio-ddr: supplied by vdd-ao
-vddio-1v8: 1800 mV 
 vddio-1v8: supplied by vdd-ao
-vdd-core: 900 <--> 1400 mV at 1100 mV 
 vdd-core: supplied by vdd-sys-3v3
-SMPS6: no parameters
-avdd-pll: 1050 mV 
 avdd-pll: supplied by vdd-sys-3v3
 sdhci-vdd-sd-slot: ramp_delay not set
-sdhci-vdd-sd-slot: 2800 mV 
 sdhci-vdd-sd-slot: supplied by vdd-sys-3v3
-SMPS10_OUT2: at 5000 mV 
-SMPS10_OUT1: at 5000 mV 
-avdd-cam1: 2800 mV 
 avdd-cam1: supplied by vdd-sys-3v3
-avdd-cam2: 2800 mV 
 avdd-cam2: supplied by vdd-sys-3v3
-avdd-dsi-csi: 1200 mV 
 avdd-dsi-csi: supplied by vddio-1v8
-vpp-fuse: 1800 mV 
 vpp-fuse: supplied by vdd-sys-3v3
-LDO5: no parameters
 LDO5: supplied by vdd_ac_bat
-vdd-sensor-2v85: 2850 mV 
 vdd-sensor-2v85: supplied by vdd-sys-3v3
-vdd-af-cam1: 2800 mV 
 vdd-af-cam1: supplied by vdd-sys-3v3
-vdd-rtc: 900 mV 
 vdd-rtc: supplied by vdd-ao
-vddio-sdmmc-2: 1800 <--> 3300 mV at 3300 mV 
 vddio-sdmmc-2: supplied by sdhci-vdd-sd-slot
-hvdd-usb: 3300 mV 
 hvdd-usb: supplied by vdd-sys-5v0
-avdd-usb: 3300 mV 
 avdd-usb: supplied by vdd-sys-5v0
-rail-3v3: no parameters
-rail-5v0: no parameters
-REGEN3: no parameters
-SYSEN1: no parameters
-SYSEN2: no parameters
 Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
-platform 70019010.iommu: Driver tegra-smmu requests probe deferral
 Advanced Linux Sound Architecture Driver Initialized.
 Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
@@ -258,7 +212,7 @@
 NFS: Registering the id_resolver key type
 Key type id_resolver registered
 Key type id_legacy registered
-msgmni has been set to 1462
+ntfs: driver 2.1.31 [Flags: R/O].
 bounce: pool size: 64 pages
 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
 io scheduler noop registered
@@ -266,13 +220,11 @@
 io scheduler cfq registered (default)
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-Serial: IMX driver
 msm_serial: driver initialized
 console [ttyS0] disabled
-of_serial 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122, base_baud = 25500000) is a Tegra
+of_serial 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 329, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
 STMicroelectronics ASC driver initialized
-serial: Freescale lpuart driver
 [drm] Initialized drm 1.1.0 20060810
 platform 54300000.dsi: Driver tegra-dsi requests probe deferral
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
@@ -299,13 +251,14 @@
 ehci-omap: OMAP-EHCI Host Controller driver
 ehci-orion: EHCI orion driver
 SPEAr-ehci: EHCI SPEAr driver
+ehci-st: EHCI STMicroelectronics driver
 tegra-ehci: Tegra EHCI driver
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 ohci-pci: OHCI PCI platform driver
 ohci-platform: OHCI generic platform driver
 ohci-omap3: OHCI OMAP3 driver
 SPEAr-ohci: OHCI SPEAr driver
+ohci-st: OHCI STMicroelectronics driver
 usbcore: registered new interface driver usb-storage
 platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
 mousedev: PS/2 mouse device common for all mice
@@ -318,6 +271,7 @@
 gspca_main: v2.14.0 registered
 sbs-battery 0-000b: sbs_probe: Failed to get device status
 sbs-battery: probe of 0-000b failed with error -121
+Driver 'mmcblk' needs updating - please use bus_type methods
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 Synopsys Designware Multimedia Card Interface Driver
@@ -335,6 +289,7 @@
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
+usbcore: registered new interface driver snd-usb-audio
 mmc1: BKOPS_EN bit is not set
 mmc1: new high speed MMC card at address 0001
 mmcblk0: mmc1:0001 SEM32G 29.1 GiB 
@@ -355,15 +310,9 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
-dvdd_ts: 1800 mV 
-usb1_vbus: 5000 mV 
 usb1_vbus: supplied by vdd-sys-5v0
-usb2_vbus: 5000 mV 
 usb2_vbus: supplied by vdd-sys-5v0
-vdd_hdmi_5v0: 5000 mV 
 vdd_hdmi_5v0: supplied by vdd-sys-5v0
-vdd_cam_1v8_reg: 1800 mV 
-VDD_5V0_HDMI_CON: 5000 mV 
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -371,15 +320,8 @@
 host1x drm: fb0:  frame buffer device
 host1x drm: registered panic notifier
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
-tegra-ehci 7d008000.usb: EHCI Host Controller
-tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
-tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-05-15 15:42:26 UTC (958405346)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-15 05:03:24 UTC (961045404)
 vdd_cam_1v8_reg: disabling
 vdd_hdmi_5v0: disabling
 usb1_vbus: disabling
@@ -391,7 +333,7 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 728K (c0b7a000 - c0c30000)
+Freeing unused kernel memory: 768K (c0c4e000 - c0d0e000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.918639] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2015-01-08 01:49:06.004856505 -0800
+++ /tmp/foob	2015-01-08 01:49:06.004856505 -0800
@@ -35,10 +35,11 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##############################################################
-	 2.9 MiB/s
+	 #################################################################
+	 #
+	 2.8 MiB/s
 done
-Bytes transferred = 4715320 (47f338 hex)
+Bytes transferred = 4777800 (48e748 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
@@ -47,12 +48,12 @@
 Loading: *###
 	 2.5 MiB/s
 done
-Bytes transferred = 34650 (875a hex)
+Bytes transferred = 34638 (874e hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x47f338 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x48e748 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff4000, end 8ffff759 ... OK
+   Loading Device Tree to 8fff4000, end 8ffff74d ... OK
 
 Starting kernel ...
 
@@ -60,7 +61,7 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 3.18.0-105467-gb2776bf (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Dec 8 12:23:39 PST 2014
+Linux version 3.19.0-rc1-117609-g97bf6af (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Jan 8 01:43:05 PST 2015
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
@@ -68,32 +69,31 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0905f00, node_mem_map ee7f7000
+free_area_init_node: node 0, pgdat c092c7c0, node_mem_map ee7f7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
-  HighMem zone: 2574 pages used for memmap
   HighMem zone: 329472 pages, LIFO batch:31
-PERCPU: Embedded 10 pages/cpu @ee7aa000 s8896 r8192 d23872 u40960
-pcpu-alloc: s8896 r8192 d23872 u40960 alloc=10*4096
+PERCPU: Embedded 10 pages/cpu @ee7aa000 s8960 r8192 d23808 u40960
+pcpu-alloc: s8960 r8192 d23808 u40960 alloc=10*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2003456K/2096128K available (6443K kernel code, 342K rwdata, 2136K rodata, 288K init, 362K bss, 92672K reserved, 1252352K highmem)
+Memory: 2003316K/2096128K available (6538K kernel code, 344K rwdata, 2176K rodata, 304K init, 350K bss, 27276K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
-    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc08692e8   (8581 kB)
-      .init : 0xc086a000 - 0xc08b2000   ( 288 kB)
-      .data : 0xc08b2000 - 0xc09079a0   ( 343 kB)
-       .bss : 0xc09079a0 - 0xc096231c   ( 363 kB)
+      .text : 0xc0008000 - 0xc088b03c   (8717 kB)
+      .init : 0xc088c000 - 0xc08d8000   ( 304 kB)
+      .data : 0xc08d8000 - 0xc092e2c0   ( 345 kB)
+       .bss : 0xc092e2c0 - 0xc0985be4   ( 351 kB)
 Preemptible hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
 L2C: failed to init: -19
@@ -115,21 +115,16 @@
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x8061bf70 - 0x8061c008
+Setting up static identity map for 0x80633050 - 0x806330e8
 Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 0
-CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
-CPU2: Booted secondary processor
 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
-CPU3: Booted secondary processor
 CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
 Brought up 4 CPUs
-SMP: Total of 4 processors activated.
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
 pinctrl core: initialized pinctrl subsystem
-regulator-dummy: no parameters
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
 cpuidle: using governor ladder
@@ -137,7 +132,6 @@
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 8 bytes.
-vdd_ac_bat: 5000 mV 
 dvdd_ts: Failed to request enable GPIO61: -517
 reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517
 platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral
@@ -147,7 +141,6 @@
 usb2_vbus: Failed to request enable GPIO86: -517
 reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
 platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
-vdd_hdmi_5v0: 5000 mV 
 reg-fixed-voltage regulators:regulator@5: Failed to find supply vin
 reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
 platform regulators:regulator@5: Driver reg-fixed-voltage requests probe deferral
@@ -161,83 +154,45 @@
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
-vdd-cpu: 500 <--> 1520 mV at 1100 mV 
 tps65090 2-0048: No cache defaults, reading back from HW
-vdd-sys-5v0: at 5000 mV 
 vdd-sys-5v0: supplied by vdd_ac_bat
-vdd-sys-3v3: at 3300 mV 
 vdd-sys-3v3: supplied by vdd_ac_bat
-vdd-ao: no parameters
 vdd-ao: supplied by vdd_ac_bat
-vdd-lcd-bl: no parameters
 vdd-lcd-bl: supplied by vdd_ac_bat
-TPS65090_RAILSFET2: no parameters
 TPS65090_RAILSFET2: supplied by vdd_ac_bat
-vdd-modem-3v3: no parameters
 vdd-modem-3v3: supplied by vdd-sys-3v3
-avdd-lcd: no parameters
 avdd-lcd: supplied by vdd-sys-3v3
-vdd-lvds: no parameters
 vdd-lvds: supplied by vdd-sys-3v3
-vdd-sd-slot: no parameters
 vdd-sd-slot: supplied by vdd-sys-3v3
-vdd-com-3v3: no parameters
 vdd-com-3v3: supplied by vdd-sys-3v3
-vdd-sby-5v0: at 5000 mV 
 vdd-sby-5v0: supplied by vdd_ac_bat
-vdd-sby-3v3: at 3300 mV 
 vdd-sby-3v3: supplied by vdd_ac_bat
-genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0x84)
+genirq: Setting trigger mode 8 for irq 341 failed (gic_set_type+0x0/0x84)
 palmas 2-0058: Irq flag is 0x00000000
 palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
-vddio-ddr: 1350 mV 
 vddio-ddr: supplied by vdd-ao
-vddio-1v8: 1800 mV 
 vddio-1v8: supplied by vdd-ao
-vdd-core: 900 <--> 1400 mV at 1100 mV 
 vdd-core: supplied by vdd-sys-3v3
-SMPS6: no parameters
-avdd-pll: 1050 mV 
 avdd-pll: supplied by vdd-sys-3v3
 sdhci-vdd-sd-slot: ramp_delay not set
-sdhci-vdd-sd-slot: 2800 mV 
 sdhci-vdd-sd-slot: supplied by vdd-sys-3v3
-SMPS10_OUT2: at 5000 mV 
-SMPS10_OUT1: at 5000 mV 
-avdd-cam1: 2800 mV 
 avdd-cam1: supplied by vdd-sys-3v3
-avdd-cam2: 2800 mV 
 avdd-cam2: supplied by vdd-sys-3v3
-avdd-dsi-csi: 1200 mV 
 avdd-dsi-csi: supplied by vddio-1v8
-vpp-fuse: 1800 mV 
 vpp-fuse: supplied by vdd-sys-3v3
-LDO5: no parameters
 LDO5: supplied by vdd_ac_bat
-vdd-sensor-2v85: 2850 mV 
 vdd-sensor-2v85: supplied by vdd-sys-3v3
-vdd-af-cam1: 2800 mV 
 vdd-af-cam1: supplied by vdd-sys-3v3
-vdd-rtc: 900 mV 
 vdd-rtc: supplied by vdd-ao
-vddio-sdmmc-2: 1800 <--> 3300 mV at 3300 mV 
 vddio-sdmmc-2: supplied by sdhci-vdd-sd-slot
-hvdd-usb: 3300 mV 
 hvdd-usb: supplied by vdd-sys-5v0
-avdd-usb: 3300 mV 
 avdd-usb: supplied by vdd-sys-5v0
-rail-3v3: no parameters
-rail-5v0: no parameters
-REGEN3: no parameters
-SYSEN1: no parameters
-SYSEN2: no parameters
 Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
-platform 70019010.iommu: Driver tegra-smmu requests probe deferral
 Advanced Linux Sound Architecture Driver Initialized.
-Bluetooth: Core ver 2.19
+Bluetooth: Core ver 2.20
 NET: Registered protocol family 31
 Bluetooth: HCI device and connection manager initialized
 Bluetooth: HCI socket layer initialized
@@ -260,13 +215,12 @@
 PCI: CLS 0 bytes, default 64
 futex hash table entries: 1024 (order: 4, 65536 bytes)
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
-msgmni has been set to 1467
 bounce: pool size: 64 pages
 io scheduler noop registered (default)
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
 console [ttyS0] disabled
-of_serial 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122, base_baud = 25500000) is a Tegra
+of_serial 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 329, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
 [drm] Initialized drm 1.1.0 20060810
 platform 54300000.dsi: Driver tegra-dsi requests probe deferral
@@ -291,7 +245,6 @@
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-pci: EHCI PCI platform driver
 tegra-ehci: Tegra EHCI driver
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
 usbcore: registered new interface driver cdc_acm
 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 usbcore: registered new interface driver cdc_wdm
@@ -307,6 +260,7 @@
 gspca_main: v2.14.0 registered
 sbs-battery 0-000b: sbs_probe: Failed to get device status
 sbs-battery: probe of 0-000b failed with error -121
+Driver 'mmcblk' needs updating - please use bus_type methods
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
@@ -350,15 +304,9 @@
 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
 Bluetooth: HIDP socket layer initialized
 Registering SWP/SWPB emulation handler
-dvdd_ts: 1800 mV 
-usb1_vbus: 5000 mV 
 usb1_vbus: supplied by vdd-sys-5v0
-usb2_vbus: 5000 mV 
 usb2_vbus: supplied by vdd-sys-5v0
-vdd_hdmi_5v0: 5000 mV 
 vdd_hdmi_5v0: supplied by vdd-sys-5v0
-vdd_cam_1v8_reg: 1800 mV 
-VDD_5V0_HDMI_CON: 5000 mV 
 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -366,15 +314,8 @@
 host1x drm: fb0:  frame buffer device
 host1x drm: registered panic notifier
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
-tegra-ehci 7d008000.usb: EHCI Host Controller
-tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
-tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-05-15 15:41:50 UTC (958405310)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-06-15 05:02:41 UTC (961045361)
 vdd_cam_1v8_reg: disabling
 vdd_hdmi_5v0: disabling
 usb1_vbus: disabling
@@ -387,7 +328,7 @@
 EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 288K (c086a000 - c08b2000)
+Freeing unused kernel memory: 304K (c088c000 - c08d8000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2015-01-08 01:49:06.012856483 -0800
+++ /tmp/foob	2015-01-08 01:49:06.012856483 -0800
@@ -38,29 +38,30 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #####################################
-	 3.1 MiB/s
+	 #################################################################
+	 ##
+	 2.8 MiB/s
 done
-Bytes transferred = 5306480 (50f870 hex)
+Bytes transferred = 5739968 (5795c0 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x82000000 tegra124-jetson-tk1.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 3 MiB/s
+	 2.7 MiB/s
 done
-Bytes transferred = 47617 (ba01 hex)
+Bytes transferred = 48898 (bf02 hex)
 Tegra124 (Jetson TK1) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x50f870 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5795c0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Using Device Tree in place at 82000000, end 8200ea00
+   Using Device Tree in place at 82000000, end 8200ef01
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 3.18.0-00251-gb2776bf (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Dec 8 12:24:31 PST 2014
+Linux version 3.19.0-rc1-12393-g97bf6af (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jan 8 01:44:03 PST 2015
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra124 Jetson TK1
@@ -68,13 +69,12 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0d1ef40, node_mem_map ee7f8000
+free_area_init_node: node 0, pgdat c0dfa680, node_mem_map ee7f8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
-  HighMem zone: 2574 pages used for memmap
   HighMem zone: 329472 pages, LIFO batch:31
-PERCPU: Embedded 10 pages/cpu @ee79f000 s8512 r8192 d24256 u40960
+PERCPU: Embedded 10 pages/cpu @ee79e000 s8512 r8192 d24256 u40960
 pcpu-alloc: s8512 r8192 d24256 u40960 alloc=10*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
@@ -82,18 +82,18 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2001304K/2096128K available (6858K kernel code, 963K rwdata, 2812K rodata, 728K init, 308K bss, 94824K reserved, 1252352K highmem)
+Memory: 2000428K/2096128K available (7469K kernel code, 953K rwdata, 3048K rodata, 768K init, 306K bss, 30164K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
-    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0b79de4   (9672 kB)
-      .init : 0xc0b7a000 - 0xc0c30000   ( 728 kB)
-      .data : 0xc0c30000 - 0xc0d20dc0   ( 964 kB)
-       .bss : 0xc0d20dc0 - 0xc0d6e068   ( 309 kB)
+      .text : 0xc0208000 - 0xc0c4d79c   (10518 kB)
+      .init : 0xc0c4e000 - 0xc0d0e000   ( 768 kB)
+      .data : 0xc0d0e000 - 0xc0dfc560   ( 954 kB)
+       .bss : 0xc0dfc560 - 0xc0e48ea8   ( 307 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
@@ -116,21 +116,16 @@
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x8087aba8 - 0x8087ac40
+Setting up static identity map for 0x8090f2f8 - 0x8090f390
 Tegra Revision: A01 SKU: 129 CPU Process: 1 Core Process: 1
-CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
-CPU2: Booted secondary processor
 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
-CPU3: Booted secondary processor
 CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
 Brought up 4 CPUs
-SMP: Total of 4 processors activated.
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
 pinctrl core: initialized pinctrl subsystem
-regulator-dummy: no parameters
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
 cpuidle: using governor ladder
@@ -138,15 +133,10 @@
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 8 bytes.
-EXYNOS: PMU not supported
 Serial: AMBA PL011 UART driver
-+VDD_MUX: 12000 mV 
-+5V_SYS: 5000 mV 
 +5V_SYS: supplied by +VDD_MUX
-+3.3V_SYS: 3300 mV 
 +3.3V_SYS: supplied by +VDD_MUX
 platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
-+3.3V_AVDD_HDMI_AP_GATED: 3300 mV 
 reg-fixed-voltage regulators:regulator@4: Failed to find supply vin
 reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
 platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
@@ -200,7 +190,7 @@
 NFS: Registering the id_resolver key type
 Key type id_resolver registered
 Key type id_legacy registered
-msgmni has been set to 1462
+ntfs: driver 2.1.31 [Flags: R/O].
 bounce: pool size: 64 pages
 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
 io scheduler noop registered
@@ -211,33 +201,22 @@
 platform 1003000.pcie-controller: Driver tegra-pcie requests probe deferral
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-Serial: IMX driver
 msm_serial: driver initialized
 console [ttyS0] disabled
-of_serial 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122, base_baud = 25500000) is a Tegra
+of_serial 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 330, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
 STMicroelectronics ASC driver initialized
-serial: Freescale lpuart driver
 [drm] Initialized drm 1.1.0 20060810
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
 loop: module loaded
 at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
 as3722 4-0040: AS3722 with revision 0x1 found
-+VDD_CPU_AP: 700 <--> 1400 mV at 1000 mV 3500 mA 
-+VDD_CORE: 700 <--> 1350 mV at 1100 mV 2500 mA 
-+1.35V_LP0(sd2): 1350 mV 
 +1.35V_LP0(sd2): supplied by +5V_SYS
-+1.35V_LP0(sd3): 1350 mV 
 +1.35V_LP0(sd3): supplied by +5V_SYS
-+1.05V_RUN: 1050 mV 
 +1.05V_RUN: supplied by +5V_SYS
-+1.8V_VDDIO: 1800 mV 
 +1.8V_VDDIO: supplied by +5V_SYS
-+VDD_GPU_AP: 650 <--> 1200 mV at 1000 mV 3500 mA 
-+1.05V_RUN_AVDD: 1050 mV at 300 mA 
 +1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
-+1.8V_RUN_CAM: 1800 mV at 150 mA 
 as3722-regulator as3722-regulator: Failed to find supply vin-ldo1-6
 as3722-regulator as3722-regulator: regulator 8 register failed -517
 platform as3722-regulator: Driver as3722-regulator requests probe deferral
@@ -265,20 +244,20 @@
 ehci-omap: OMAP-EHCI Host Controller driver
 ehci-orion: EHCI orion driver
 SPEAr-ehci: EHCI SPEAr driver
+ehci-st: EHCI STMicroelectronics driver
 tegra-ehci: Tegra EHCI driver
-platform 7d004000.usb: Driver tegra-ehci requests probe deferral
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 ohci-pci: OHCI PCI platform driver
 ohci-platform: OHCI generic platform driver
 ohci-omap3: OHCI OMAP3 driver
 SPEAr-ohci: OHCI SPEAr driver
+ohci-st: OHCI STMicroelectronics driver
 usbcore: registered new interface driver usb-storage
 tegra-phy 7d004000.usb-phy: no vbus regulator
 platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
 mousedev: PS/2 mouse device common for all mice
 as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
-as3722-rtc as3722-rtc: RTC interrupt 464
+as3722-rtc as3722-rtc: RTC interrupt 364
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 i2c /dev entries driver
@@ -286,6 +265,7 @@
 USB Video Class driver (1.1.1)
 gspca_main: v2.14.0 registered
 0-004c supply vcc not found, using dummy regulator
+Driver 'mmcblk' needs updating - please use bus_type methods
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 Synopsys Designware Multimedia Card Interface Driver
@@ -299,10 +279,11 @@
 sdhci-tegra 700b0600.sdhci: No vmmc regulator found
 sdhci-tegra 700b0600.sdhci: No vqmmc regulator found
 mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
+mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
+usbcore: registered new interface driver snd-usb-audio
 mmc0: BKOPS_EN bit is not set
 mmc0: new high speed MMC card at address 0001
 mmcblk0: mmc0:0001 SEM16G 14.6 GiB 
@@ -324,84 +305,49 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
-+3.3V_RUN: 3300 mV 
 +3.3V_RUN: supplied by +3.3V_SYS
-+3.3V_AVDD_HDMI_AP_GATED: 3300 mV 
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
-+USB0_VBUS_SW: 5000 mV 
 +USB0_VBUS_SW: supplied by +5V_SYS
-+5V_USB_HS: 5000 mV 
 +5V_USB_HS: supplied by +5V_SYS
-+3.3V_LP0: 3300 mV 
 +3.3V_LP0: supplied by +3.3V_SYS
-+1.05V_RUN_AVDD_HDMI_PLL: 1050 mV 
 reg-fixed-voltage regulators:regulator@11: Failed to find supply vin
 reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
 platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral
-+5V_HDMI_CON: 5000 mV 
 +5V_HDMI_CON: supplied by +5V_SYS
-+5V_SATA: 5000 mV 
 +5V_SATA: supplied by +5V_SYS
-+12V_SATA: 12000 mV 
 +12V_SATA: supplied by +VDD_MUX
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
 platform 1003000.pcie-controller: Driver tegra-pcie requests probe deferral
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
 platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
-+VDD_CPU_AP: 700 <--> 1400 mV at 1000 mV 3500 mA 
-+VDD_CORE: 700 <--> 1350 mV at 1100 mV 2500 mA 
-+1.35V_LP0(sd2): 1350 mV 
 +1.35V_LP0(sd2): supplied by +5V_SYS
-+1.35V_LP0(sd3): 1350 mV 
 +1.35V_LP0(sd3): supplied by +5V_SYS
-+1.05V_RUN: 1050 mV 
 +1.05V_RUN: supplied by +5V_SYS
-+1.8V_VDDIO: 1800 mV 
 +1.8V_VDDIO: supplied by +5V_SYS
-+VDD_GPU_AP: 650 <--> 1200 mV at 1000 mV 3500 mA 
-+1.05V_RUN_AVDD: 1050 mV at 300 mA 
 +1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
-+1.8V_RUN_CAM: 1800 mV at 150 mA 
 +1.8V_RUN_CAM: supplied by +3.3V_RUN
-+1.2V_GEN_AVDD: 1200 mV at 150 mA 
 +1.2V_GEN_AVDD: supplied by +1.8V_VDDIO
-+1.05V_LP0_VDD_RTC: 1000 mV at 150 mA 
 +1.05V_LP0_VDD_RTC: supplied by +3.3V_SYS
-+2.8V_RUN_CAM: 2800 mV at 150 mA 
 +2.8V_RUN_CAM: supplied by +3.3V_SYS
-+1.2V_RUN_CAM_FRONT: 1200 mV at 150 mA 
 +1.2V_RUN_CAM_FRONT: supplied by +1.8V_VDDIO
-+VDDIO_SDMMC3: 1800 <--> 3300 mV at 150 mA 
 +VDDIO_SDMMC3: supplied by +3.3V_RUN
-+1.05V_RUN_CAM_REAR: 1050 mV at 150 mA 
 +1.05V_RUN_CAM_REAR: supplied by +1.8V_VDDIO
-+3.3V_RUN_TOUCH: 2800 mV at 150 mA 
 +3.3V_RUN_TOUCH: supplied by +5V_SYS
-+2.8V_RUN_CAM_AF: 2800 mV at 150 mA 
 +2.8V_RUN_CAM_AF: supplied by +5V_SYS
-+1.8V_RUN_VPP_FUSE: 1800 mV at 150 mA 
 +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
 tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
 tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
 scsi host0: ahci_platform
 scsi host1: ahci_platform
-ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 55
+ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 340
 ata2: DUMMY
-tegra-ehci 7d004000.usb: EHCI Host Controller
-tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000
-tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc1: Unknown controller version (3). You may experience problems.
 sdhci-tegra 700b0400.sdhci: No vmmc regulator found
 mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-+1.05V_RUN_AVDD_HDMI_PLL: 1050 mV 
+mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
@@ -413,41 +359,16 @@
 tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
 tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
+tegra-pcie 1003000.pcie-controller: link 1 down, retrying
+tegra-pcie 1003000.pcie-controller: link 1 down, retrying
+tegra-pcie 1003000.pcie-controller: link 1 down, retrying
+tegra-pcie 1003000.pcie-controller: link 1 down, ignoring
 tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
 pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
 pci_bus 0000:00: root bus resource [bus 00-ff]
 pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
-pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
-pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
-PCI: bus0: Fast back to back transfers disabled
-pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
-pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
-pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
-pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
-pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
-pci 0000:01:00.0: supports D1 D2
-pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
-PCI: bus1: Fast back to back transfers disabled
-pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
-pci 0000:00:02.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
-pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
-pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
-pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
-pci 0000:01:00.0: BAR 2: assigned [mem 0x13000000-0x13000fff 64bit]
-pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
-pci 0000:00:02.0: PCI bridge to [bus 01]
-pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
-pci 0000:00:02.0:   bridge window [mem 0x13000000-0x130fffff]
-pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
-pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
-pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
-pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
-pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
-r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
-r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xf0158000, 00:04:4b:25:b3:b4, XID 0c000800 IRQ 481
-r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
+PCI: bus0: Fast back to back transfers enabled
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 host1x drm: No connectors reported connected with modes
@@ -456,14 +377,8 @@
 host1x drm: fb0:  frame buffer device
 host1x drm: registered panic notifier
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
-tegra-ehci 7d008000.usb: EHCI Host Controller
-tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
-tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:48 UTC (949363248)
+as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:19 UTC (949363219)
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
 +1.8V_RUN_VPP_FUSE: disabling
 +2.8V_RUN_CAM_AF: disabling
@@ -482,7 +397,7 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 728K (c0b7a000 - c0c30000)
+Freeing unused kernel memory: 768K (c0c4e000 - c0d0e000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.744520] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2015-01-08 01:49:06.020856437 -0800
+++ /tmp/foob	2015-01-08 01:49:06.020856437 -0800
@@ -37,24 +37,25 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##############################################################
+	 #################################################################
+	 #
 	 2.8 MiB/s
 done
-Bytes transferred = 4715320 (47f338 hex)
+Bytes transferred = 4777800 (48e748 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x82000000 tegra124-jetson-tk1.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.8 MiB/s
+	 2.7 MiB/s
 done
-Bytes transferred = 47617 (ba01 hex)
+Bytes transferred = 48898 (bf02 hex)
 Tegra124 (Jetson TK1) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x47f338 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x48e748 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Using Device Tree in place at 82000000, end 8200ea00
+   Using Device Tree in place at 82000000, end 8200ef01
 
 Starting kernel ...
 
@@ -62,7 +63,7 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 3.18.0-105467-gb2776bf (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Dec 8 12:23:39 PST 2014
+Linux version 3.19.0-rc1-117609-g97bf6af (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Jan 8 01:43:05 PST 2015
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra124 Jetson TK1
@@ -70,32 +71,31 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0905f00, node_mem_map ee7f7000
+free_area_init_node: node 0, pgdat c092c7c0, node_mem_map ee7f7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
-  HighMem zone: 2574 pages used for memmap
   HighMem zone: 329472 pages, LIFO batch:31
-PERCPU: Embedded 10 pages/cpu @ee79e000 s8896 r8192 d23872 u40960
-pcpu-alloc: s8896 r8192 d23872 u40960 alloc=10*4096
+PERCPU: Embedded 10 pages/cpu @ee79d000 s8960 r8192 d23808 u40960
+pcpu-alloc: s8960 r8192 d23808 u40960 alloc=10*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2003396K/2096128K available (6443K kernel code, 342K rwdata, 2136K rodata, 288K init, 362K bss, 92732K reserved, 1252352K highmem)
+Memory: 2003252K/2096128K available (6538K kernel code, 344K rwdata, 2176K rodata, 304K init, 350K bss, 27340K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
-    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc08692e8   (8581 kB)
-      .init : 0xc086a000 - 0xc08b2000   ( 288 kB)
-      .data : 0xc08b2000 - 0xc09079a0   ( 343 kB)
-       .bss : 0xc09079a0 - 0xc096231c   ( 363 kB)
+      .text : 0xc0008000 - 0xc088b03c   (8717 kB)
+      .init : 0xc088c000 - 0xc08d8000   ( 304 kB)
+      .data : 0xc08d8000 - 0xc092e2c0   ( 345 kB)
+       .bss : 0xc092e2c0 - 0xc0985be4   ( 351 kB)
 Preemptible hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
 L2C: failed to init: -19
@@ -117,21 +117,16 @@
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x8061bf70 - 0x8061c008
+Setting up static identity map for 0x80633050 - 0x806330e8
 Tegra Revision: A01 SKU: 129 CPU Process: 1 Core Process: 1
-CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
-CPU2: Booted secondary processor
 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
-CPU3: Booted secondary processor
 CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
 Brought up 4 CPUs
-SMP: Total of 4 processors activated.
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
 pinctrl core: initialized pinctrl subsystem
-regulator-dummy: no parameters
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
 cpuidle: using governor ladder
@@ -139,13 +134,9 @@
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 8 bytes.
-+VDD_MUX: 12000 mV 
-+5V_SYS: 5000 mV 
 +5V_SYS: supplied by +VDD_MUX
-+3.3V_SYS: 3300 mV 
 +3.3V_SYS: supplied by +VDD_MUX
 platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
-+3.3V_AVDD_HDMI_AP_GATED: 3300 mV 
 reg-fixed-voltage regulators:regulator@4: Failed to find supply vin
 reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
 platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
@@ -179,7 +170,7 @@
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 Advanced Linux Sound Architecture Driver Initialized.
-Bluetooth: Core ver 2.19
+Bluetooth: Core ver 2.20
 NET: Registered protocol family 31
 Bluetooth: HCI device and connection manager initialized
 Bluetooth: HCI socket layer initialized
@@ -202,7 +193,6 @@
 PCI: CLS 0 bytes, default 64
 futex hash table entries: 1024 (order: 4, 65536 bytes)
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
-msgmni has been set to 1466
 bounce: pool size: 64 pages
 io scheduler noop registered (default)
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
@@ -211,7 +201,7 @@
 tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
 console [ttyS0] disabled
-of_serial 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122, base_baud = 25500000) is a Tegra
+of_serial 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 330, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
 [drm] Initialized drm 1.1.0 20060810
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
@@ -219,20 +209,11 @@
 loop: module loaded
 at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
 as3722 4-0040: AS3722 with revision 0x1 found
-+VDD_CPU_AP: 700 <--> 1400 mV at 1000 mV 3500 mA 
-+VDD_CORE: 700 <--> 1350 mV at 1100 mV 2500 mA 
-+1.35V_LP0(sd2): 1350 mV 
 +1.35V_LP0(sd2): supplied by +5V_SYS
-+1.35V_LP0(sd3): 1350 mV 
 +1.35V_LP0(sd3): supplied by +5V_SYS
-+1.05V_RUN: 1050 mV 
 +1.05V_RUN: supplied by +5V_SYS
-+1.8V_VDDIO: 1800 mV 
 +1.8V_VDDIO: supplied by +5V_SYS
-+VDD_GPU_AP: 650 <--> 1200 mV at 1000 mV 3500 mA 
-+1.05V_RUN_AVDD: 1050 mV at 300 mA 
 +1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
-+1.8V_RUN_CAM: 1800 mV at 150 mA 
 as3722-regulator as3722-regulator: Failed to find supply vin-ldo1-6
 as3722-regulator as3722-regulator: regulator 8 register failed -517
 platform as3722-regulator: Driver as3722-regulator requests probe deferral
@@ -257,8 +238,6 @@
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-pci: EHCI PCI platform driver
 tegra-ehci: Tegra EHCI driver
-platform 7d004000.usb: Driver tegra-ehci requests probe deferral
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
 usbcore: registered new interface driver cdc_acm
 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 usbcore: registered new interface driver cdc_wdm
@@ -267,7 +246,7 @@
 platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
 mousedev: PS/2 mouse device common for all mice
 as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
-as3722-rtc as3722-rtc: RTC interrupt 464
+as3722-rtc as3722-rtc: RTC interrupt 364
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 i2c /dev entries driver
@@ -275,6 +254,7 @@
 USB Video Class driver (1.1.1)
 gspca_main: v2.14.0 registered
 0-004c supply vcc not found, using dummy regulator
+Driver 'mmcblk' needs updating - please use bus_type methods
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
@@ -287,7 +267,7 @@
 sdhci-tegra 700b0600.sdhci: No vmmc regulator found
 sdhci-tegra 700b0600.sdhci: No vqmmc regulator found
 mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
+mmc0: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA 64-bit
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
 mmc0: BKOPS_EN bit is not set
@@ -319,84 +299,49 @@
 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
 Bluetooth: HIDP socket layer initialized
 Registering SWP/SWPB emulation handler
-+3.3V_RUN: 3300 mV 
 +3.3V_RUN: supplied by +3.3V_SYS
-+3.3V_AVDD_HDMI_AP_GATED: 3300 mV 
 +3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
-+USB0_VBUS_SW: 5000 mV 
 +USB0_VBUS_SW: supplied by +5V_SYS
-+5V_USB_HS: 5000 mV 
 +5V_USB_HS: supplied by +5V_SYS
-+3.3V_LP0: 3300 mV 
 +3.3V_LP0: supplied by +3.3V_SYS
-+1.05V_RUN_AVDD_HDMI_PLL: 1050 mV 
 reg-fixed-voltage regulators:regulator@11: Failed to find supply vin
 reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
 platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral
-+5V_HDMI_CON: 5000 mV 
 +5V_HDMI_CON: supplied by +5V_SYS
-+5V_SATA: 5000 mV 
 +5V_SATA: supplied by +5V_SYS
-+12V_SATA: 12000 mV 
 +12V_SATA: supplied by +VDD_MUX
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: Failed to get supply 'avddio-pex': -517
 platform 1003000.pcie-controller: Driver tegra-pcie requests probe deferral
 tegra-hdmi 54280000.hdmi: failed to get PLL regulator
 platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
-+VDD_CPU_AP: 700 <--> 1400 mV at 1000 mV 3500 mA 
-+VDD_CORE: 700 <--> 1350 mV at 1100 mV 2500 mA 
-+1.35V_LP0(sd2): 1350 mV 
 +1.35V_LP0(sd2): supplied by +5V_SYS
-+1.35V_LP0(sd3): 1350 mV 
 +1.35V_LP0(sd3): supplied by +5V_SYS
-+1.05V_RUN: 1050 mV 
 +1.05V_RUN: supplied by +5V_SYS
-+1.8V_VDDIO: 1800 mV 
 +1.8V_VDDIO: supplied by +5V_SYS
-+VDD_GPU_AP: 650 <--> 1200 mV at 1000 mV 3500 mA 
-+1.05V_RUN_AVDD: 1050 mV at 300 mA 
 +1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
-+1.8V_RUN_CAM: 1800 mV at 150 mA 
 +1.8V_RUN_CAM: supplied by +3.3V_RUN
-+1.2V_GEN_AVDD: 1200 mV at 150 mA 
 +1.2V_GEN_AVDD: supplied by +1.8V_VDDIO
-+1.05V_LP0_VDD_RTC: 1000 mV at 150 mA 
 +1.05V_LP0_VDD_RTC: supplied by +3.3V_SYS
-+2.8V_RUN_CAM: 2800 mV at 150 mA 
 +2.8V_RUN_CAM: supplied by +3.3V_SYS
-+1.2V_RUN_CAM_FRONT: 1200 mV at 150 mA 
 +1.2V_RUN_CAM_FRONT: supplied by +1.8V_VDDIO
-+VDDIO_SDMMC3: 1800 <--> 3300 mV at 150 mA 
 +VDDIO_SDMMC3: supplied by +3.3V_RUN
-+1.05V_RUN_CAM_REAR: 1050 mV at 150 mA 
 +1.05V_RUN_CAM_REAR: supplied by +1.8V_VDDIO
-+3.3V_RUN_TOUCH: 2800 mV at 150 mA 
 +3.3V_RUN_TOUCH: supplied by +5V_SYS
-+2.8V_RUN_CAM_AF: 2800 mV at 150 mA 
 +2.8V_RUN_CAM_AF: supplied by +5V_SYS
-+1.8V_RUN_VPP_FUSE: 1800 mV at 150 mA 
 +1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
 tegra-ahci 70027000.sata: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl platform mode
 tegra-ahci 70027000.sata: flags: 64bit ncq sntf pm led pio slum part sadm sds apst 
 scsi host0: ahci_platform
 scsi host1: ahci_platform
-ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 55
+ata1: SATA max UDMA/133 mmio [mem 0x70027000-0x70028fff] port 0x100 irq 340
 ata2: DUMMY
-tegra-ehci 7d004000.usb: EHCI Host Controller
-tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000
-tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
 sdhci-tegra 700b0400.sdhci: Got CD GPIO
 sdhci-tegra 700b0400.sdhci: Got WP GPIO
 mmc1: Unknown controller version (3). You may experience problems.
 sdhci-tegra 700b0400.sdhci: No vmmc regulator found
 mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
-+1.05V_RUN_AVDD_HDMI_PLL: 1050 mV 
+mmc1: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA 64-bit
 +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
 tegra-pcie 1003000.pcie-controller: 2x1, 1x1 configuration
 tegra-pcie 1003000.pcie-controller: probing port 0, using 2 lanes
@@ -426,14 +371,8 @@
 host1x drm: fb0:  frame buffer device
 host1x drm: registered panic notifier
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
-tegra-ehci 7d008000.usb: EHCI Host Controller
-tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
-tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218)
+as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:17 UTC (949363217)
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
 +1.8V_RUN_VPP_FUSE: disabling
 +2.8V_RUN_CAM_AF: disabling
@@ -452,8 +391,7 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 288K (c086a000 - c08b2000)
+Freeing unused kernel memory: 304K (c088c000 - c08d8000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-usb 2-1: new high-speed USB device number 2 using tegra-ehci
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2015-01-08 01:49:06.028856421 -0800
+++ /tmp/foob	2015-01-08 01:49:06.028856421 -0800
@@ -36,29 +36,30 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 #####################################
+	 #################################################################
+	 ##
 	 2.8 MiB/s
 done
-Bytes transferred = 5306480 (50f870 hex)
+Bytes transferred = 5739968 (5795c0 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *##
-	 2.6 MiB/s
+	 2.3 MiB/s
 done
-Bytes transferred = 24733 (609d hex)
+Bytes transferred = 24641 (6041 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x50f870 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x5795c0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff6000, end 8ffff09c ... OK
+   Loading Device Tree to 8fff6000, end 8ffff040 ... OK
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 3.18.0-00251-gb2776bf (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Dec 8 12:24:31 PST 2014
+Linux version 3.19.0-rc1-12393-g97bf6af (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Jan 8 01:44:03 PST 2015
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -66,13 +67,12 @@
 cma: Reserved 64 MiB at 0xfb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0d1ef40, node_mem_map ee7f8000
+free_area_init_node: node 0, pgdat c0dfa680, node_mem_map ee7f8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
-  HighMem zone: 2574 pages used for memmap
   HighMem zone: 329472 pages, LIFO batch:31
-PERCPU: Embedded 10 pages/cpu @ee7b4000 s8512 r8192 d24256 u40960
+PERCPU: Embedded 10 pages/cpu @ee7b5000 s8512 r8192 d24256 u40960
 pcpu-alloc: s8512 r8192 d24256 u40960 alloc=10*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
@@ -80,18 +80,18 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2001408K/2096128K available (6858K kernel code, 963K rwdata, 2812K rodata, 728K init, 308K bss, 94720K reserved, 1252352K highmem)
+Memory: 2000540K/2096128K available (7469K kernel code, 953K rwdata, 3048K rodata, 768K init, 306K bss, 30052K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
-    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0b79de4   (9672 kB)
-      .init : 0xc0b7a000 - 0xc0c30000   ( 728 kB)
-      .data : 0xc0c30000 - 0xc0d20dc0   ( 964 kB)
-       .bss : 0xc0d20dc0 - 0xc0d6e068   ( 309 kB)
+      .text : 0xc0208000 - 0xc0c4d79c   (10518 kB)
+      .init : 0xc0c4e000 - 0xc0d0e000   ( 768 kB)
+      .data : 0xc0d0e000 - 0xc0dfc560   ( 954 kB)
+       .bss : 0xc0dfc560 - 0xc0e48ea8   ( 307 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
@@ -115,21 +115,16 @@
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x8087aba8 - 0x8087ac40
+Setting up static identity map for 0x8090f2f8 - 0x8090f390
 Tegra Revision: A03 SKU: 128 CPU Process: 4 Core Process: 0
-CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
-CPU2: Booted secondary processor
 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
-CPU3: Booted secondary processor
 CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
 Brought up 4 CPUs
-SMP: Total of 4 processors activated.
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
 pinctrl core: initialized pinctrl subsystem
-regulator-dummy: no parameters
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
 cpuidle: using governor ladder
@@ -137,9 +132,7 @@
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 4 bytes.
-EXYNOS: PMU not supported
 Serial: AMBA PL011 UART driver
-vdd_5v_in: 5000 mV 
 platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral
 platform regulators:regulator@2: Driver reg-fixed-voltage requests probe deferral
 vdd_5v_sata: Failed to request enable GPIO30: -517
@@ -155,7 +148,6 @@
 sys_3v3_pexs: Failed to request enable GPIO95: -517
 reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
 platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
-+VDD_5V_HDMI: 5000 mV 
 reg-fixed-voltage regulators:regulator@8: Failed to find supply vin
 reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
 platform regulators:regulator@8: Driver reg-fixed-voltage requests probe deferral
@@ -165,38 +157,23 @@
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
-vrtc: no parameters
 vrtc: supplied by vdd_5v_in
-vdd_1v8_gen: 1800 mV 
 vdd_1v8_gen: supplied by vdd_5v_in
-vddio_ddr_1v2: 1200 mV 
 vddio_ddr_1v2: supplied by vdd_5v_in
-vdd_1v5_gen: 1500 mV 
 vdd_1v5_gen: supplied by vdd_5v_in
-vdd_cpu,vdd_sys: 1000 mV 
-vdd_pexa,vdd_pexb: 1050 mV 
 vdd_pexa,vdd_pexb: supplied by vdd_1v5_gen
-vdd_sata,avdd_plle: 1050 mV 
 vdd_sata,avdd_plle: supplied by vdd_1v5_gen
-ldo3: at 1000 mV 
 ldo3: supplied by vdd_5v_in
-vdd_rtc: 1200 mV 
 vdd_rtc: supplied by vdd_5v_in
-vddio_sdmmc,avdd_vdac: 3300 mV 
 vddio_sdmmc,avdd_vdac: supplied by vdd_5v_in
-avdd_dsi_csi,pwrdet_mipi: 1200 mV 
 avdd_dsi_csi,pwrdet_mipi: supplied by vdd_1v8_gen
-vdd_pllm,x,u,a_p_c_s: 1200 mV 
 vdd_pllm,x,u,a_p_c_s: supplied by vdd_1v8_gen
-vdd_ddr_hs: 1000 mV 
 vdd_ddr_hs: supplied by vdd_1v8_gen
-tps62361-vout: 500 <--> 1500 mV at 1160 mV 
 Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
-platform 7000f010.iommu: Driver tegra-smmu requests probe deferral
 Advanced Linux Sound Architecture Driver Initialized.
 Switched to clocksource timer_us
 NET: Registered protocol family 2
@@ -218,7 +195,7 @@
 NFS: Registering the id_resolver key type
 Key type id_resolver registered
 Key type id_legacy registered
-msgmni has been set to 1463
+ntfs: driver 2.1.31 [Flags: R/O].
 bounce: pool size: 64 pages
 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
 io scheduler noop registered
@@ -229,13 +206,11 @@
 platform 3000.pcie-controller: Driver tegra-pcie requests probe deferral
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-Serial: IMX driver
 msm_serial: driver initialized
 console [ttyS0] disabled
-of_serial 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 68, base_baud = 25500000) is a Tegra
+of_serial 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
 STMicroelectronics ASC driver initialized
-serial: Freescale lpuart driver
 [drm] Initialized drm 1.1.0 20060810
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
@@ -261,14 +236,14 @@
 ehci-omap: OMAP-EHCI Host Controller driver
 ehci-orion: EHCI orion driver
 SPEAr-ehci: EHCI SPEAr driver
+ehci-st: EHCI STMicroelectronics driver
 tegra-ehci: Tegra EHCI driver
-platform 7d004000.usb: Driver tegra-ehci requests probe deferral
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 ohci-pci: OHCI PCI platform driver
 ohci-platform: OHCI generic platform driver
 ohci-omap3: OHCI OMAP3 driver
 SPEAr-ohci: OHCI SPEAr driver
+ohci-st: OHCI STMicroelectronics driver
 usbcore: registered new interface driver usb-storage
 platform 7d004000.usb-phy: Driver tegra-phy requests probe deferral
 platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
@@ -280,6 +255,7 @@
 usbcore: registered new interface driver uvcvideo
 USB Video Class driver (1.1.1)
 gspca_main: v2.14.0 registered
+Driver 'mmcblk' needs updating - please use bus_type methods
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 Synopsys Designware Multimedia Card Interface Driver
@@ -297,6 +273,7 @@
 ledtrig-cpu: registered to indicate activity on CPUs
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
+usbcore: registered new interface driver snd-usb-audio
 mmc1: new high speed MMC card at address 0001
 mmcblk0: mmc1:0001 SEM16G 14.8 GiB 
 mmcblk0boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
@@ -317,20 +294,12 @@
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
-chargepump_5v: 5000 mV 
-vdd_ddr: 1500 mV 
 vdd_ddr: supplied by vdd_5v_in
-vdd_5v_sata: 5000 mV 
 vdd_5v_sata: supplied by vdd_5v_in
-usb1_vbus: 5000 mV 
 usb1_vbus: supplied by vdd_5v_in
-usb3_vbus: 5000 mV 
 usb3_vbus: supplied by vdd_5v_in
-sys_3v3,vdd_3v3_alw: 3300 mV 
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
-sys_3v3_pexs: 3300 mV 
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
-+VDD_5V_HDMI: 5000 mV 
 +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 tegra-pcie 3000.pcie-controller: 2x3 configuration
 tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
@@ -370,7 +339,7 @@
 pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf00d2000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 473
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf0146000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -380,21 +349,6 @@
 host1x drm: fb0:  frame buffer device
 host1x drm: registered panic notifier
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
-platform 7d004000.usb: Driver tegra-ehci requests probe deferral
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
-utmi_phy_clk_enable: timeout waiting for phy to stabilize
-tegra-ehci 7d004000.usb: EHCI Host Controller
-tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000
-tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
-tegra-ehci 7d008000.usb: EHCI Host Controller
-tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
-tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 1 port detected
 tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
 usb1_vbus: disabling
 vdd_sata,avdd_plle: disabling
@@ -406,7 +360,7 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 728K (c0b7a000 - c0c30000)
+Freeing unused kernel memory: 768K (c0c4e000 - c0d0e000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.263876] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2015-01-08 01:49:06.036856436 -0800
+++ /tmp/foob	2015-01-08 01:49:06.040856433 -0800
@@ -27,7 +27,6 @@
 Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd'
 Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
 Tegra30 (Beaver) # tftpboot 0x81000000 zImage.tegra_defconfig
-Waiting for Ethernet connection... done.
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'zImage.tegra_defconfig'.
@@ -36,10 +35,11 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ##############################################################
-	 3 MiB/s
+	 #################################################################
+	 #
+	 2.8 MiB/s
 done
-Bytes transferred = 4715320 (47f338 hex)
+Bytes transferred = 4777800 (48e748 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -48,12 +48,12 @@
 Loading: *##
 	 2.6 MiB/s
 done
-Bytes transferred = 24733 (609d hex)
+Bytes transferred = 24641 (6041 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x47f338 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x48e748 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff6000, end 8ffff09c ... OK
+   Loading Device Tree to 8fff6000, end 8ffff040 ... OK
 
 Starting kernel ...
 
@@ -61,7 +61,7 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 3.18.0-105467-gb2776bf (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Dec 8 12:23:39 PST 2014
+Linux version 3.19.0-rc1-117609-g97bf6af (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Jan 8 01:43:05 PST 2015
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -69,32 +69,31 @@
 cma: Reserved 64 MiB at 0xfbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0905f00, node_mem_map ee7f7000
+free_area_init_node: node 0, pgdat c092c7c0, node_mem_map ee7f7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
-  HighMem zone: 2574 pages used for memmap
   HighMem zone: 329472 pages, LIFO batch:31
-PERCPU: Embedded 10 pages/cpu @ee7b3000 s8896 r8192 d23872 u40960
-pcpu-alloc: s8896 r8192 d23872 u40960 alloc=10*4096
+PERCPU: Embedded 10 pages/cpu @ee7b4000 s8960 r8192 d23808 u40960
+pcpu-alloc: s8960 r8192 d23808 u40960 alloc=10*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2003500K/2096128K available (6443K kernel code, 342K rwdata, 2136K rodata, 288K init, 362K bss, 92628K reserved, 1252352K highmem)
+Memory: 2003364K/2096128K available (6538K kernel code, 344K rwdata, 2176K rodata, 304K init, 350K bss, 27228K reserved, 65536K cma-reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
-    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc08692e8   (8581 kB)
-      .init : 0xc086a000 - 0xc08b2000   ( 288 kB)
-      .data : 0xc08b2000 - 0xc09079a0   ( 343 kB)
-       .bss : 0xc09079a0 - 0xc096231c   ( 363 kB)
+      .text : 0xc0008000 - 0xc088b03c   (8717 kB)
+      .init : 0xc088c000 - 0xc08d8000   ( 304 kB)
+      .data : 0xc08d8000 - 0xc092e2c0   ( 345 kB)
+       .bss : 0xc092e2c0 - 0xc0985be4   ( 351 kB)
 Preemptible hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
 L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
@@ -117,21 +116,16 @@
 Initializing cgroup subsys debug
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x8061bf70 - 0x8061c008
+Setting up static identity map for 0x80633050 - 0x806330e8
 Tegra Revision: A03 SKU: 128 CPU Process: 4 Core Process: 0
-CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
-CPU2: Booted secondary processor
 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
-CPU3: Booted secondary processor
 CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
 Brought up 4 CPUs
-SMP: Total of 4 processors activated.
 CPU: All CPU(s) started in SVC mode.
 devtmpfs: initialized
 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
 pinctrl core: initialized pinctrl subsystem
-regulator-dummy: no parameters
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
 cpuidle: using governor ladder
@@ -139,7 +133,6 @@
 No ATAGs?
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 4 bytes.
-vdd_5v_in: 5000 mV 
 platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral
 platform regulators:regulator@2: Driver reg-fixed-voltage requests probe deferral
 vdd_5v_sata: Failed to request enable GPIO30: -517
@@ -155,7 +148,6 @@
 sys_3v3_pexs: Failed to request enable GPIO95: -517
 reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
 platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
-+VDD_5V_HDMI: 5000 mV 
 reg-fixed-voltage regulators:regulator@8: Failed to find supply vin
 reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
 platform regulators:regulator@8: Driver reg-fixed-voltage requests probe deferral
@@ -165,39 +157,24 @@
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
-vrtc: no parameters
 vrtc: supplied by vdd_5v_in
-vdd_1v8_gen: 1800 mV 
 vdd_1v8_gen: supplied by vdd_5v_in
-vddio_ddr_1v2: 1200 mV 
 vddio_ddr_1v2: supplied by vdd_5v_in
-vdd_1v5_gen: 1500 mV 
 vdd_1v5_gen: supplied by vdd_5v_in
-vdd_cpu,vdd_sys: 1000 mV 
-vdd_pexa,vdd_pexb: 1050 mV 
 vdd_pexa,vdd_pexb: supplied by vdd_1v5_gen
-vdd_sata,avdd_plle: 1050 mV 
 vdd_sata,avdd_plle: supplied by vdd_1v5_gen
-ldo3: at 1000 mV 
 ldo3: supplied by vdd_5v_in
-vdd_rtc: 1200 mV 
 vdd_rtc: supplied by vdd_5v_in
-vddio_sdmmc,avdd_vdac: 3300 mV 
 vddio_sdmmc,avdd_vdac: supplied by vdd_5v_in
-avdd_dsi_csi,pwrdet_mipi: 1200 mV 
 avdd_dsi_csi,pwrdet_mipi: supplied by vdd_1v8_gen
-vdd_pllm,x,u,a_p_c_s: 1200 mV 
 vdd_pllm,x,u,a_p_c_s: supplied by vdd_1v8_gen
-vdd_ddr_hs: 1000 mV 
 vdd_ddr_hs: supplied by vdd_1v8_gen
-tps62361-vout: 500 <--> 1500 mV at 1160 mV 
 Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
-platform 7000f010.iommu: Driver tegra-smmu requests probe deferral
 Advanced Linux Sound Architecture Driver Initialized.
-Bluetooth: Core ver 2.19
+Bluetooth: Core ver 2.20
 NET: Registered protocol family 31
 Bluetooth: HCI device and connection manager initialized
 Bluetooth: HCI socket layer initialized
@@ -221,7 +198,6 @@
 hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
 futex hash table entries: 1024 (order: 4, 65536 bytes)
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
-msgmni has been set to 1467
 bounce: pool size: 64 pages
 io scheduler noop registered (default)
 tegra-pcie 3000.pcie-controller: 2x3 configuration
@@ -230,7 +206,7 @@
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
 console [ttyS0] disabled
-of_serial 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 68, base_baud = 25500000) is a Tegra
+of_serial 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 331, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
 [drm] Initialized drm 1.1.0 20060810
 tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
@@ -254,8 +230,6 @@
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-pci: EHCI PCI platform driver
 tegra-ehci: Tegra EHCI driver
-platform 7d004000.usb: Driver tegra-ehci requests probe deferral
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
 usbcore: registered new interface driver cdc_acm
 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 usbcore: registered new interface driver cdc_wdm
@@ -270,6 +244,7 @@
 usbcore: registered new interface driver uvcvideo
 USB Video Class driver (1.1.1)
 gspca_main: v2.14.0 registered
+Driver 'mmcblk' needs updating - please use bus_type methods
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
@@ -313,20 +288,12 @@
 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
 Bluetooth: HIDP socket layer initialized
 Registering SWP/SWPB emulation handler
-chargepump_5v: 5000 mV 
-vdd_ddr: 1500 mV 
 vdd_ddr: supplied by vdd_5v_in
-vdd_5v_sata: 5000 mV 
 vdd_5v_sata: supplied by vdd_5v_in
-usb1_vbus: 5000 mV 
 usb1_vbus: supplied by vdd_5v_in
-usb3_vbus: 5000 mV 
 usb3_vbus: supplied by vdd_5v_in
-sys_3v3,vdd_3v3_alw: 3300 mV 
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
-sys_3v3_pexs: 3300 mV 
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
-+VDD_5V_HDMI: 5000 mV 
 +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 tegra-pcie 3000.pcie-controller: 2x3 configuration
 tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
@@ -366,7 +333,7 @@
 pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf00d2000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 473
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf00d2000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 375
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -376,21 +343,6 @@
 host1x drm: fb0:  frame buffer device
 host1x drm: registered panic notifier
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
-platform 7d004000.usb: Driver tegra-ehci requests probe deferral
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
-utmi_phy_clk_enable: timeout waiting for phy to stabilize
-tegra-ehci 7d004000.usb: EHCI Host Controller
-tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000
-tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
-tegra-ehci 7d008000.usb: EHCI Host Controller
-tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
-tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
-tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 1 port detected
 tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
 usb1_vbus: disabling
 vdd_sata,avdd_plle: disabling
@@ -403,7 +355,7 @@
 EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 288K (c086a000 - c08b2000)
+Freeing unused kernel memory: 304K (c088c000 - c08d8000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.557147] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# 
\ No newline at end of file
