Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2014-11-02 15:39:06.168387131 -0800
+++ /tmp/foob	2014-11-02 15:39:06.168387131 -0800
@@ -36,21 +36,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ####################################
-	 3 MiB/s
+	 ###################################
+	 2.9 MiB/s
 done
-Bytes transferred = 5288264 (50b148 hex)
+Bytes transferred = 5281680 (509790 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3 MiB/s
+	 2.8 MiB/s
 done
 Bytes transferred = 34770 (87d2 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x50b148 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x509790 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff7d1 ... OK
@@ -58,7 +58,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 3.18.0-rc2-103936-gcac7f24 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Oct 26 17:04:36 PDT 2014
+Linux version 3.18.0-rc3-104475-g0df1f24 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Nov 2 15:34:21 PST 2014
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
@@ -66,7 +66,7 @@
 cma: Reserved 64 MiB at fb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0d0d5c0, node_mem_map ee7f8000
+free_area_init_node: node 0, pgdat c0d0b580, node_mem_map ee7f8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
@@ -80,7 +80,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2001436K/2096128K available (6854K kernel code, 933K rwdata, 2780K rodata, 724K init, 308K bss, 94692K reserved, 1252352K highmem)
+Memory: 2001444K/2096128K available (6846K kernel code, 933K rwdata, 2780K rodata, 724K init, 308K bss, 94684K reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
@@ -88,10 +88,10 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0b70d00   (9636 kB)
-      .init : 0xc0b71000 - 0xc0c26000   ( 724 kB)
-      .data : 0xc0c26000 - 0xc0d0f440   ( 934 kB)
-       .bss : 0xc0d0f440 - 0xc0d5c6e8   ( 309 kB)
+      .text : 0xc0208000 - 0xc0b6ebe8   (9627 kB)
+      .init : 0xc0b6f000 - 0xc0c24000   ( 724 kB)
+      .data : 0xc0c24000 - 0xc0d0d400   ( 933 kB)
+       .bss : 0xc0d0d400 - 0xc0d5a668   ( 309 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
@@ -100,8 +100,11 @@
 L2C: failed to init: -19
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
 Switching to timer-based delay loop, resolution 1000ns
+Architected cp15 timer(s) running at 12.00MHz (virt).
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
+Switching to timer-based delay loop, resolution 83ns
 Console: colour dummy device 80x30
-Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=5000)
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000)
 pid_max: default: 32768 minimum: 301
 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
@@ -111,7 +114,7 @@
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x80879d18 - 0x80879db0
+Setting up static identity map for 0x80877a10 - 0x80877aa8
 Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 0
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
@@ -238,7 +241,7 @@
 EDAC MC: Ver: 3.0.0
 platform 70019010.iommu: Driver tegra-smmu requests probe deferral
 Advanced Linux Sound Architecture Driver Initialized.
-Switched to clocksource timer_us
+Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
@@ -378,7 +381,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-04-02 19:20:29 UTC (954703229)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-04-09 18:50:35 UTC (955306235)
 vdd_cam_1v8_reg: disabling
 vdd_hdmi_5v0: disabling
 usb1_vbus: disabling
@@ -390,8 +393,7 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 724K (c0b71000 - c0c26000)
+Freeing unused kernel memory: 724K (c0b6f000 - c0c24000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-usb 1-1: new high-speed USB device number 2 using tegra-ehci
-root@(none):/# 
\ No newline at end of file
+root@(none):/# [    2.933595] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2014-11-02 15:39:06.176387128 -0800
+++ /tmp/foob	2014-11-02 15:39:06.176387128 -0800
@@ -36,9 +36,9 @@
 	 #################################################################
 	 #################################################################
 	 ##############################################################
-	 3.2 MiB/s
+	 2.9 MiB/s
 done
-Bytes transferred = 4719464 (480368 hex)
+Bytes transferred = 4713648 (47ecb0 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
@@ -49,7 +49,7 @@
 done
 Bytes transferred = 34770 (87d2 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x480368 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x47ecb0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff7d1 ... OK
@@ -60,7 +60,7 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 3.18.0-rc2-103936-gcac7f24 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Oct 26 17:03:24 PDT 2014
+Linux version 3.18.0-rc3-104475-g0df1f24 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Nov 2 15:33:28 PST 2014
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
@@ -68,7 +68,7 @@
 cma: Reserved 64 MiB at fbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0907d00, node_mem_map ee7f7000
+free_area_init_node: node 0, pgdat c0905d00, node_mem_map ee7f7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
@@ -82,7 +82,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2003448K/2096128K available (6451K kernel code, 341K rwdata, 2132K rodata, 292K init, 362K bss, 92680K reserved, 1252352K highmem)
+Memory: 2003456K/2096128K available (6443K kernel code, 341K rwdata, 2136K rodata, 288K init, 362K bss, 92672K reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
@@ -90,17 +90,20 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc086a3e4   (8585 kB)
-      .init : 0xc086b000 - 0xc08b4000   ( 292 kB)
-      .data : 0xc08b4000 - 0xc09097a0   ( 342 kB)
-       .bss : 0xc09097a0 - 0xc096411c   ( 363 kB)
+      .text : 0xc0008000 - 0xc08692d8   (8581 kB)
+      .init : 0xc086a000 - 0xc08b2000   ( 288 kB)
+      .data : 0xc08b2000 - 0xc09077a0   ( 342 kB)
+       .bss : 0xc09077a0 - 0xc096211c   ( 363 kB)
 Preemptible hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
 L2C: failed to init: -19
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
 Switching to timer-based delay loop, resolution 1000ns
+Architected cp15 timer(s) running at 12.00MHz (virt).
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
+Switching to timer-based delay loop, resolution 83ns
 Console: colour dummy device 80x30
-Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
 pid_max: default: 32768 minimum: 301
 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
@@ -112,7 +115,7 @@
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x8061de28 - 0x8061dec0
+Setting up static identity map for 0x8061b9e8 - 0x8061ba80
 Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 0
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
@@ -241,7 +244,7 @@
 Bluetooth: L2CAP socket layer initialized
 Bluetooth: SCO socket layer initialized
 cfg80211: Calling CRDA to update world regulatory domain
-Switched to clocksource timer_us
+Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
@@ -257,7 +260,7 @@
 PCI: CLS 0 bytes, default 64
 futex hash table entries: 1024 (order: 4, 65536 bytes)
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
-msgmni has been set to 1466
+msgmni has been set to 1467
 bounce: pool size: 64 pages
 io scheduler noop registered (default)
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
@@ -371,7 +374,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-04-02 19:19:42 UTC (954703182)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-04-09 18:50:09 UTC (955306209)
 vdd_cam_1v8_reg: disabling
 vdd_hdmi_5v0: disabling
 usb1_vbus: disabling
@@ -384,7 +387,7 @@
 EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 292K (c086b000 - c08b4000)
+Freeing unused kernel memory: 288K (c086a000 - c08b2000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
 root@(none):/# 
\ No newline at end of file
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	2014-11-02 15:39:06.180387125 -0800
+++ /tmp/foob	2014-11-02 15:39:06.184387122 -0800
@@ -38,21 +38,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ####################################
+	 ###################################
 	 2.8 MiB/s
 done
-Bytes transferred = 5288264 (50b148 hex)
+Bytes transferred = 5281680 (509790 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x82000000 tegra124-jetson-tk1.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'tegra124-jetson-tk1.dtb'.
 Load address: 0x82000000
 Loading: *####
-	 2.5 MiB/s
+	 2.7 MiB/s
 done
 Bytes transferred = 47577 (b9d9 hex)
 Tegra124 (Jetson TK1) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x50b148 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x509790 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Using Device Tree in place at 82000000, end 8200e9d8
@@ -60,7 +60,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 3.18.0-rc2-103936-gcac7f24 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Oct 26 17:04:36 PDT 2014
+Linux version 3.18.0-rc3-104475-g0df1f24 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Nov 2 15:34:21 PST 2014
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra124 Jetson TK1
@@ -68,7 +68,7 @@
 cma: Reserved 64 MiB at fb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0d0d5c0, node_mem_map ee7f8000
+free_area_init_node: node 0, pgdat c0d0b580, node_mem_map ee7f8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
@@ -82,7 +82,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2001376K/2096128K available (6854K kernel code, 933K rwdata, 2780K rodata, 724K init, 308K bss, 94752K reserved, 1252352K highmem)
+Memory: 2001384K/2096128K available (6846K kernel code, 933K rwdata, 2780K rodata, 724K init, 308K bss, 94744K reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
@@ -90,10 +90,10 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0b70d00   (9636 kB)
-      .init : 0xc0b71000 - 0xc0c26000   ( 724 kB)
-      .data : 0xc0c26000 - 0xc0d0f440   ( 934 kB)
-       .bss : 0xc0d0f440 - 0xc0d5c6e8   ( 309 kB)
+      .text : 0xc0208000 - 0xc0b6ebe8   (9627 kB)
+      .init : 0xc0b6f000 - 0xc0c24000   ( 724 kB)
+      .data : 0xc0c24000 - 0xc0d0d400   ( 933 kB)
+       .bss : 0xc0d0d400 - 0xc0d5a668   ( 309 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
@@ -102,8 +102,11 @@
 L2C: failed to init: -19
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
 Switching to timer-based delay loop, resolution 1000ns
+Architected cp15 timer(s) running at 12.00MHz (virt).
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
+Switching to timer-based delay loop, resolution 83ns
 Console: colour dummy device 80x30
-Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=5000)
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000)
 pid_max: default: 32768 minimum: 301
 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
@@ -113,7 +116,7 @@
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x80879d18 - 0x80879db0
+Setting up static identity map for 0x80877a10 - 0x80877aa8
 Tegra Revision: A01 SKU: 129 CPU Process: 1 Core Process: 1
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
@@ -180,7 +183,7 @@
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
 Advanced Linux Sound Architecture Driver Initialized.
-Switched to clocksource timer_us
+Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
@@ -412,16 +415,41 @@
 tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
 tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
 tegra-pcie 1003000.pcie-controller: Slot present pin change, signature: 00000000
-tegra-pcie 1003000.pcie-controller: link 1 down, retrying
-tegra-pcie 1003000.pcie-controller: link 1 down, retrying
-tegra-pcie 1003000.pcie-controller: link 1 down, retrying
-tegra-pcie 1003000.pcie-controller: link 1 down, ignoring
 tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
 pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
 pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
 pci_bus 0000:00: root bus resource [bus 00-ff]
 pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
-PCI: bus0: Fast back to back transfers enabled
+pci 0000:00:02.0: [10de:0e13] type 01 class 0x060400
+pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
+PCI: bus0: Fast back to back transfers disabled
+pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
+pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
+pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
+pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:01:00.0: supports D1 D2
+pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+PCI: bus1: Fast back to back transfers disabled
+pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
+pci 0000:00:02.0: BAR 8: assigned [mem 0x13000000-0x130fffff]
+pci 0000:00:02.0: BAR 9: assigned [mem 0x20000000-0x200fffff 64bit pref]
+pci 0000:00:02.0: BAR 7: assigned [io  0x1000-0x1fff]
+pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit pref]
+pci 0000:01:00.0: BAR 2: assigned [mem 0x13000000-0x13000fff 64bit]
+pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
+pci 0000:00:02.0: PCI bridge to [bus 01]
+pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
+pci 0000:00:02.0:   bridge window [mem 0x13000000-0x130fffff]
+pci 0000:00:02.0:   bridge window [mem 0x20000000-0x200fffff 64bit pref]
+pci 0000:00:02.0: nv_msi_ht_cap_quirk didn't locate host bridge
+pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
+pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
+pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
+r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
+r8169 0000:01:00.0: enabling device (0140 -> 0143)
+r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xf0158000, 00:04:4b:25:b3:b4, XID 0c000800 IRQ 481
+r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
 host1x drm: No connectors reported connected with modes
@@ -437,7 +465,7 @@
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:20 UTC (949363220)
+as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:49 UTC (949363249)
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
 +1.8V_RUN_VPP_FUSE: disabling
 +2.8V_RUN_CAM_AF: disabling
@@ -456,8 +484,7 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 724K (c0b71000 - c0c26000)
-usb 2-1: new high-speed USB device number 2 using tegra-ehci
+Freeing unused kernel memory: 724K (c0b6f000 - c0c24000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+root@(none):/# [    4.739570] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	2014-11-02 15:39:06.188387120 -0800
+++ /tmp/foob	2014-11-02 15:39:06.192387121 -0800
@@ -29,7 +29,6 @@
 Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd'
 Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
 Tegra124 (Jetson TK1) # tftpboot 0x81000000 zImage.tegra_defconfig
-Waiting for Ethernet connection... done.
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
 Filename 'zImage.tegra_defconfig'.
@@ -41,7 +40,7 @@
 	 ##############################################################
 	 3.2 MiB/s
 done
-Bytes transferred = 4719464 (480368 hex)
+Bytes transferred = 4713648 (47ecb0 hex)
 Tegra124 (Jetson TK1) # tftpboot 0x82000000 tegra124-jetson-tk1.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.102
@@ -52,7 +51,7 @@
 done
 Bytes transferred = 47577 (b9d9 hex)
 Tegra124 (Jetson TK1) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x480368 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x47ecb0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Using Device Tree in place at 82000000, end 8200e9d8
@@ -63,7 +62,7 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 3.18.0-rc2-103936-gcac7f24 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Oct 26 17:03:24 PDT 2014
+Linux version 3.18.0-rc3-104475-g0df1f24 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Nov 2 15:33:28 PST 2014
 CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra124 Jetson TK1
@@ -71,7 +70,7 @@
 cma: Reserved 64 MiB at fbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0907d00, node_mem_map ee7f7000
+free_area_init_node: node 0, pgdat c0905d00, node_mem_map ee7f7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
@@ -85,7 +84,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2003388K/2096128K available (6451K kernel code, 341K rwdata, 2132K rodata, 292K init, 362K bss, 92740K reserved, 1252352K highmem)
+Memory: 2003396K/2096128K available (6443K kernel code, 341K rwdata, 2136K rodata, 288K init, 362K bss, 92732K reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
@@ -93,17 +92,20 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc086a3e4   (8585 kB)
-      .init : 0xc086b000 - 0xc08b4000   ( 292 kB)
-      .data : 0xc08b4000 - 0xc09097a0   ( 342 kB)
-       .bss : 0xc09097a0 - 0xc096411c   ( 363 kB)
+      .text : 0xc0008000 - 0xc08692d8   (8581 kB)
+      .init : 0xc086a000 - 0xc08b2000   ( 288 kB)
+      .data : 0xc08b2000 - 0xc09077a0   ( 342 kB)
+       .bss : 0xc09077a0 - 0xc096211c   ( 363 kB)
 Preemptible hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
 L2C: failed to init: -19
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
 Switching to timer-based delay loop, resolution 1000ns
+Architected cp15 timer(s) running at 12.00MHz (virt).
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
+Switching to timer-based delay loop, resolution 83ns
 Console: colour dummy device 80x30
-Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
 pid_max: default: 32768 minimum: 301
 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
@@ -115,7 +117,7 @@
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x8061de28 - 0x8061dec0
+Setting up static identity map for 0x8061b9e8 - 0x8061ba80
 Tegra Revision: A01 SKU: 129 CPU Process: 1 Core Process: 1
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
@@ -184,7 +186,7 @@
 Bluetooth: L2CAP socket layer initialized
 Bluetooth: SCO socket layer initialized
 cfg80211: Calling CRDA to update world regulatory domain
-Switched to clocksource timer_us
+Switched to clocksource arch_sys_counter
 NET: Registered protocol family 2
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
@@ -431,7 +433,7 @@
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:20 UTC (949363220)
+as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218)
 +1.05V_RUN_AVDD_HDMI_PLL: disabling
 +1.8V_RUN_VPP_FUSE: disabling
 +2.8V_RUN_CAM_AF: disabling
@@ -450,8 +452,8 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext4 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 292K (c086b000 - c08b4000)
-usb 2-1: new high-speed USB device number 2 using tegra-ehci
+Freeing unused kernel memory: 288K (c086a000 - c08b2000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    6.478265] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:11:31:3b
+usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2014-11-02 15:39:06.196387120 -0800
+++ /tmp/foob	2014-11-02 15:39:06.200387119 -0800
@@ -36,21 +36,21 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ####################################
-	 2.8 MiB/s
+	 ###################################
+	 2.9 MiB/s
 done
-Bytes transferred = 5288264 (50b148 hex)
+Bytes transferred = 5281680 (509790 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *##
-	 3 MiB/s
+	 2.6 MiB/s
 done
 Bytes transferred = 24893 (613d hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x50b148 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x509790 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff6000, end 8ffff13c ... OK
@@ -58,7 +58,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 3.18.0-rc2-103936-gcac7f24 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Oct 26 17:04:36 PDT 2014
+Linux version 3.18.0-rc3-104475-g0df1f24 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Nov 2 15:34:21 PST 2014
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -66,7 +66,7 @@
 cma: Reserved 64 MiB at fb800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0d0d5c0, node_mem_map ee7f8000
+free_area_init_node: node 0, pgdat c0d0b580, node_mem_map ee7f8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
@@ -80,7 +80,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2001480K/2096128K available (6854K kernel code, 933K rwdata, 2780K rodata, 724K init, 308K bss, 94648K reserved, 1252352K highmem)
+Memory: 2001488K/2096128K available (6846K kernel code, 933K rwdata, 2780K rodata, 724K init, 308K bss, 94640K reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
@@ -88,18 +88,16 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0b70d00   (9636 kB)
-      .init : 0xc0b71000 - 0xc0c26000   ( 724 kB)
-      .data : 0xc0c26000 - 0xc0d0f440   ( 934 kB)
-       .bss : 0xc0d0f440 - 0xc0d5c6e8   ( 309 kB)
+      .text : 0xc0208000 - 0xc0b6ebe8   (9627 kB)
+      .init : 0xc0b6f000 - 0xc0c24000   ( 724 kB)
+      .data : 0xc0c24000 - 0xc0d0d400   ( 933 kB)
+       .bss : 0xc0d0d400 - 0xc0d5a668   ( 309 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
 RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
 NR_IRQS:16 nr_irqs:16 16
 L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
-PL310 OF: cache setting yield illegal associativity
-PL310 OF: 0 calculated, only 8 and 16 legal
 L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
 L2C-310 erratum 769419 enabled
 L2C-310 enabling early BRESP for Cortex-A9
@@ -117,7 +115,7 @@
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x80879d18 - 0x80879db0
+Setting up static identity map for 0x80877a10 - 0x80877aa8
 Tegra Revision: A03 SKU: 128 CPU Process: 4 Core Process: 0
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
@@ -410,8 +408,8 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 724K (c0b71000 - c0c26000)
-usb 2-1: new high-speed USB device number 2 using tegra-ehci
+Freeing unused kernel memory: 724K (c0b6f000 - c0c24000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.758007] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
+root@(none):/# [    4.283864] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2014-11-02 15:39:06.204387117 -0800
+++ /tmp/foob	2014-11-02 15:39:06.208387115 -0800
@@ -36,9 +36,9 @@
 	 #################################################################
 	 #################################################################
 	 ##############################################################
-	 3 MiB/s
+	 2.8 MiB/s
 done
-Bytes transferred = 4719464 (480368 hex)
+Bytes transferred = 4713648 (47ecb0 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -49,7 +49,7 @@
 done
 Bytes transferred = 24893 (613d hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x480368 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x47ecb0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff6000, end 8ffff13c ... OK
@@ -60,7 +60,7 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 3.18.0-rc2-103936-gcac7f24 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Oct 26 17:03:24 PDT 2014
+Linux version 3.18.0-rc3-104475-g0df1f24 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Nov 2 15:33:28 PST 2014
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -68,7 +68,7 @@
 cma: Reserved 64 MiB at fbc00000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0907d00, node_mem_map ee7f7000
+free_area_init_node: node 0, pgdat c0905d00, node_mem_map ee7f7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
@@ -82,7 +82,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2003492K/2096128K available (6451K kernel code, 341K rwdata, 2132K rodata, 292K init, 362K bss, 92636K reserved, 1252352K highmem)
+Memory: 2003500K/2096128K available (6443K kernel code, 341K rwdata, 2136K rodata, 288K init, 362K bss, 92628K reserved, 1252352K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
@@ -90,15 +90,13 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc086a3e4   (8585 kB)
-      .init : 0xc086b000 - 0xc08b4000   ( 292 kB)
-      .data : 0xc08b4000 - 0xc09097a0   ( 342 kB)
-       .bss : 0xc09097a0 - 0xc096411c   ( 363 kB)
+      .text : 0xc0008000 - 0xc08692d8   (8581 kB)
+      .init : 0xc086a000 - 0xc08b2000   ( 288 kB)
+      .data : 0xc08b2000 - 0xc09077a0   ( 342 kB)
+       .bss : 0xc09077a0 - 0xc096211c   ( 363 kB)
 Preemptible hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
 L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
-PL310 OF: cache setting yield illegal associativity
-PL310 OF: 0 calculated, only 8 and 16 legal
 L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
 L2C-310 erratum 769419 enabled
 L2C-310 enabling early BRESP for Cortex-A9
@@ -118,7 +116,7 @@
 Initializing cgroup subsys debug
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x8061de28 - 0x8061dec0
+Setting up static identity map for 0x8061b9e8 - 0x8061ba80
 Tegra Revision: A03 SKU: 128 CPU Process: 4 Core Process: 0
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
@@ -404,8 +402,8 @@
 EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 292K (c086b000 - c08b4000)
+Freeing unused kernel memory: 288K (c086a000 - c08b2000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.556901] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.557210] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:67:60
