Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2014-07-21 18:08:36.162516576 -0700
+++ /tmp/foob	2014-07-21 18:08:36.166516568 -0700
@@ -37,20 +37,20 @@
 	 #################################################################
 	 #################################################################
 	 ###########
-	 3.2 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 4931312 (4b3ef0 hex)
+Bytes transferred = 4932040 (4b41c8 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.5 MiB/s
+	 3 MiB/s
 done
 Bytes transferred = 34244 (85c4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x4b3ef0 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x4b41c8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK
@@ -58,7 +58,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 3.16.0-rc5-79186-g1795cd9 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jul 13 14:33:39 PDT 2014
+Linux version 3.16.0-rc6-79485-g9a3c414 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jul 21 18:03:06 PDT 2014
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
@@ -66,7 +66,7 @@
 cma: CMA: reserved 64 MiB at ab800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0c41b00, node_mem_map ea7d8000
+free_area_init_node: node 0, pgdat c0c43b00, node_mem_map ea7d8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
@@ -81,7 +81,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2002160K/2096128K available (6357K kernel code, 894K rwdata, 2568K rodata, 652K init, 304K bss, 93968K reserved, 1317888K highmem)
+Memory: 2002152K/2096128K available (6362K kernel code, 894K rwdata, 2568K rodata, 652K init, 304K bss, 93976K reserved, 1317888K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
@@ -89,10 +89,10 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0abfa68   (8927 kB)
-      .init : 0xc0ac0000 - 0xc0b63100   ( 653 kB)
-      .data : 0xc0b64000 - 0xc0c43800   ( 894 kB)
-       .bss : 0xc0c43808 - 0xc0c8f898   ( 305 kB)
+      .text : 0xc0208000 - 0xc0ac0a90   (8931 kB)
+      .init : 0xc0ac1000 - 0xc0b64100   ( 653 kB)
+      .data : 0xc0b66000 - 0xc0c45800   ( 894 kB)
+       .bss : 0xc0c45808 - 0xc0c91898   ( 305 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
@@ -114,7 +114,7 @@
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x80801e40 - 0x80801ed8
+Setting up static identity map for 0x80802690 - 0x80802728
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: Booted secondary processor
@@ -316,8 +316,6 @@
 gspca_main: v2.14.0 registered
 sbs-battery 0-000b: sbs_probe: Failed to get device status
 sbs-battery: probe of 0-000b failed with error -121
-tps65090-charger tps65090-charger: Unable to get charger irq = -22
-tps65090-charger: probe of tps65090-charger failed with error -22
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 Synopsys Designware Multimedia Card Interface Driver
@@ -380,7 +378,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-02-10 22:58:27 UTC (950223507)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-02-19 02:27:46 UTC (950927266)
 vdd_cam_1v8_reg: disabling
 vdd_hdmi_5v0: disabling
 usb1_vbus: disabling
@@ -392,7 +390,7 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 652K (c0ac0000 - c0b63000)
+Freeing unused kernel memory: 652K (c0ac1000 - c0b64000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.872779] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.837691] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2014-07-21 18:08:36.206516573 -0700
+++ /tmp/foob	2014-07-21 18:08:36.206516573 -0700
@@ -36,9 +36,9 @@
 	 #################################################################
 	 #################################################################
 	 ##########################################
-	 3.5 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 4420736 (437480 hex)
+Bytes transferred = 4420248 (437298 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
@@ -49,7 +49,7 @@
 done
 Bytes transferred = 34244 (85c4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x437480 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x437298 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK
@@ -60,7 +60,7 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 3.16.0-rc5-79186-g1795cd9 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jul 13 14:35:00 PDT 2014
+Linux version 3.16.0-rc6-79485-g9a3c414 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jul 21 18:05:03 PDT 2014
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
@@ -91,7 +91,7 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc07df290   (8029 kB)
+      .text : 0xc0008000 - 0xc07df29c   (8029 kB)
       .init : 0xc07e0000 - 0xc0822240   ( 265 kB)
       .data : 0xc0824000 - 0xc0876a80   ( 331 kB)
        .bss : 0xc0876a8c - 0xc08cfffc   ( 358 kB)
@@ -115,7 +115,7 @@
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x805b83e0 - 0x805b8478
+Setting up static identity map for 0x805b8c30 - 0x805b8cc8
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: Booted secondary processor
@@ -299,8 +299,6 @@
 gspca_main: v2.14.0 registered
 sbs-battery 0-000b: sbs_probe: Failed to get device status
 sbs-battery: probe of 0-000b failed with error -121
-tps65090-charger tps65090-charger: Unable to get charger irq = -22
-tps65090-charger: probe of tps65090-charger failed with error -22
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
@@ -370,7 +368,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-02-10 22:59:24 UTC (950223564)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-02-19 02:29:34 UTC (950927374)
 vdd_cam_1v8_reg: disabling
 vdd_hdmi_5v0: disabling
 usb1_vbus: disabling
@@ -386,4 +384,4 @@
 Freeing unused kernel memory: 264K (c07e0000 - c0822000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# 
\ No newline at end of file
+root@(none):/# [    3.010659] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2014-07-21 18:08:36.254516570 -0700
+++ /tmp/foob	2014-07-21 18:08:36.254516570 -0700
@@ -37,9 +37,9 @@
 	 #################################################################
 	 #################################################################
 	 ###########
-	 3.4 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 4931312 (4b3ef0 hex)
+Bytes transferred = 4932040 (4b41c8 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -50,7 +50,7 @@
 done
 Bytes transferred = 24197 (5e85 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x4b3ef0 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x4b41c8 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff7000, end 8ffffe84 ... OK
@@ -58,7 +58,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 3.16.0-rc5-79186-g1795cd9 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jul 13 14:33:39 PDT 2014
+Linux version 3.16.0-rc6-79485-g9a3c414 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Jul 21 18:03:06 PDT 2014
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -66,7 +66,7 @@
 cma: CMA: reserved 64 MiB at ab800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0c41b00, node_mem_map ea7d8000
+free_area_init_node: node 0, pgdat c0c43b00, node_mem_map ea7d8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
@@ -83,7 +83,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2002212K/2096128K available (6357K kernel code, 894K rwdata, 2568K rodata, 652K init, 304K bss, 93916K reserved, 1317888K highmem)
+Memory: 2002204K/2096128K available (6362K kernel code, 894K rwdata, 2568K rodata, 652K init, 304K bss, 93924K reserved, 1317888K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
@@ -91,10 +91,10 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0abfa68   (8927 kB)
-      .init : 0xc0ac0000 - 0xc0b63100   ( 653 kB)
-      .data : 0xc0b64000 - 0xc0c43800   ( 894 kB)
-       .bss : 0xc0c43808 - 0xc0c8f898   ( 305 kB)
+      .text : 0xc0208000 - 0xc0ac0a90   (8931 kB)
+      .init : 0xc0ac1000 - 0xc0b64100   ( 653 kB)
+      .data : 0xc0b66000 - 0xc0c45800   ( 894 kB)
+       .bss : 0xc0c45808 - 0xc0c91898   ( 305 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
@@ -117,7 +117,7 @@
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x80801e40 - 0x80801ed8
+Setting up static identity map for 0x80802690 - 0x80802728
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: Booted secondary processor
@@ -396,8 +396,8 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 652K (c0ac0000 - c0b63000)
+Freeing unused kernel memory: 652K (c0ac1000 - c0b64000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.278753] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.268759] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:68:6d
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2014-07-21 18:08:36.262516578 -0700
+++ /tmp/foob	2014-07-21 18:08:36.266516583 -0700
@@ -36,20 +36,20 @@
 	 #################################################################
 	 #################################################################
 	 ##########################################
-	 3.4 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 4420736 (437480 hex)
+Bytes transferred = 4420248 (437298 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *##
-	 2.3 MiB/s
+	 3.3 MiB/s
 done
 Bytes transferred = 24197 (5e85 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x437480 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x437298 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff7000, end 8ffffe84 ... OK
@@ -60,7 +60,7 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 3.16.0-rc5-79186-g1795cd9 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jul 13 14:35:00 PDT 2014
+Linux version 3.16.0-rc6-79485-g9a3c414 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Jul 21 18:05:03 PDT 2014
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -93,7 +93,7 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc07df290   (8029 kB)
+      .text : 0xc0008000 - 0xc07df29c   (8029 kB)
       .init : 0xc07e0000 - 0xc0822240   ( 265 kB)
       .data : 0xc0824000 - 0xc0876a80   ( 331 kB)
        .bss : 0xc0876a8c - 0xc08cfffc   ( 358 kB)
@@ -118,7 +118,7 @@
 Initializing cgroup subsys debug
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x805b83e0 - 0x805b8478
+Setting up static identity map for 0x805b8c30 - 0x805b8cc8
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: Booted secondary processor
@@ -393,5 +393,5 @@
 Freeing unused kernel memory: 264K (c07e0000 - c0822000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.636748] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.647008] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:68:6d
