U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32) U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32) TEGRA114 Board: NVIDIA Dalmore I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra114 (Dalmore) # Tegra114 (Dalmore) # usb reset (Re)start USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra114 (Dalmore) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash' Tegra114 (Dalmore) # setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra114 (Dalmore) # tftpboot 0x81000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########### 3.3 MiB/s done Bytes transferred = 4930968 (4b3d98 hex) Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'tegra114-dalmore.dtb'. Load address: 0x82000000 Loading: *### 2.5 MiB/s done Bytes transferred = 34244 (85c4 hex) Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x4b3d98 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.16.0-rc4-78932-gcd3de83 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Tue Jul 8 21:26:38 PDT 2014 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: NVIDIA Tegra114 Dalmore evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 64 MiB at ab800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c0c41b00, node_mem_map ea7d8000 [ 0.000000] DMA zone: 1520 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2574 pages used for memmap [ 0.000000] HighMem zone: 329472 pages, LIFO batch:31 [ 0.000000] Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 1 [ 0.000000] PERCPU: Embedded 8 pages/cpu @ea793000 s8448 r8192 d16128 u32768 [ 0.000000] pcpu-alloc: s8448 r8192 d16128 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522512 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2002160K/2096128K available (6357K kernel code, 894K rwdata, 2564K rodata, 652K init, 304K bss, 93968K reserved, 1317888K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0abea54 (8923 kB) [ 0.000000] .init : 0xc0abf000 - 0xc0b62100 ( 653 kB) [ 0.000000] .data : 0xc0b64000 - 0xc0c43800 ( 894 kB) [ 0.000000] .bss : 0xc0c43808 - 0xc0c8f898 ( 305 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns [ 0.002072] Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.002095] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns [ 0.002105] Switching to timer-based delay loop [ 0.002396] Console: colour dummy device 80x30 [ 0.002421] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000) [ 0.002435] pid_max: default: 32768 minimum: 301 [ 0.002564] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002576] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003116] CPU: Testing write buffer coherency: ok [ 0.003318] /cpus/cpu@0 missing clock-frequency property [ 0.003342] /cpus/cpu@1 missing clock-frequency property [ 0.003366] /cpus/cpu@2 missing clock-frequency property [ 0.003392] /cpus/cpu@3 missing clock-frequency property [ 0.003405] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003453] Setting up static identity map for 0x80801b18 - 0x80801bb0 [ 0.005654] CPU1: Booted secondary processor [ 0.005682] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006181] CPU2: Booted secondary processor [ 0.006206] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.006725] CPU3: Booted secondary processor [ 0.006749] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.006827] Brought up 4 CPUs [ 0.006876] SMP: Total of 4 processors activated. [ 0.006884] CPU: All CPU(s) started in SVC mode. [ 0.007428] devtmpfs: initialized [ 0.013198] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.013655] pinctrl core: initialized pinctrl subsystem [ 0.014096] regulator-dummy: no parameters [ 0.025675] NET: Registered protocol family 16 [ 0.027741] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.029277] cpuidle: using governor ladder [ 0.029292] cpuidle: using governor menu [ 0.041107] No ATAGs? [ 0.041144] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.041154] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.041307] EXYNOS: PMU not supported [ 0.043547] Serial: AMBA PL011 UART driver [ 0.070090] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.070114] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.070684] vdd_ac_bat: 5000 mV [ 0.070923] dvdd_ts: Failed to request enable GPIO61: -517 [ 0.071025] reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517 [ 0.071047] platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral [ 0.071221] usb1_vbus: Failed to request enable GPIO108: -517 [ 0.071316] reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517 [ 0.071338] platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral [ 0.071507] usb2_vbus: Failed to request enable GPIO86: -517 [ 0.071598] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ 0.071619] platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral [ 0.071781] vdd_hdmi_5v0: 5000 mV [ 0.071825] reg-fixed-voltage regulators:regulator@5: Failed to find supply vin [ 0.071926] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.071947] platform regulators:regulator@5: Driver reg-fixed-voltage requests probe deferral [ 0.072034] platform regulators:regulator@6: Driver reg-fixed-voltage requests probe deferral [ 0.072205] VDD_5V0_HDMI_CON: Failed to request enable GPIO81: -517 [ 0.072296] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.072317] platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral [ 0.074436] vgaarb: loaded [ 0.075050] SCSI subsystem initialized [ 0.075230] libata version 3.00 loaded. [ 0.075569] usbcore: registered new interface driver usbfs [ 0.075639] usbcore: registered new interface driver hub [ 0.075746] usbcore: registered new device driver usb [ 0.078943] vdd-cpu: 500 <--> 1520 mV at 1100 mV [ 0.079336] tps65090 2-0048: No cache defaults, reading back from HW [ 0.081373] vdd-sys-5v0: no parameters [ 0.081424] vdd-sys-5v0: supplied by vdd_ac_bat [ 0.082477] vdd-sys-3v3: no parameters [ 0.082523] vdd-sys-3v3: supplied by vdd_ac_bat [ 0.083542] vdd-ao: no parameters [ 0.083587] vdd-ao: supplied by vdd_ac_bat [ 0.083936] vdd-lcd-bl: no parameters [ 0.083985] vdd-lcd-bl: supplied by vdd_ac_bat [ 0.084319] TPS65090_RAILSFET2: no parameters [ 0.084361] TPS65090_RAILSFET2: supplied by vdd_ac_bat [ 0.084704] vdd-modem-3v3: no parameters [ 0.084743] vdd-modem-3v3: supplied by vdd-sys-3v3 [ 0.085255] avdd-lcd: no parameters [ 0.085294] avdd-lcd: supplied by vdd-sys-3v3 [ 0.085792] vdd-lvds: no parameters [ 0.085831] vdd-lvds: supplied by vdd-sys-3v3 [ 0.086636] vdd-sd-slot: no parameters [ 0.086677] vdd-sd-slot: supplied by vdd-sys-3v3 [ 0.087209] vdd-com-3v3: no parameters [ 0.087249] vdd-com-3v3: supplied by vdd-sys-3v3 [ 0.087739] vdd-sby-5v0: no parameters [ 0.087777] vdd-sby-5v0: supplied by vdd_ac_bat [ 0.087950] vdd-sby-3v3: no parameters [ 0.087987] vdd-sby-3v3: supplied by vdd_ac_bat [ 0.088395] genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0x104) [ 0.088714] palmas 2-0058: Irq flag is 0x00000000 [ 0.091267] palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0 [ 0.094338] vddio-ddr: 1350 mV [ 0.094558] vddio-ddr: supplied by vdd-ao [ 0.095965] vddio-1v8: 1800 mV [ 0.096183] vddio-1v8: supplied by vdd-ao [ 0.097754] vdd-core: 900 <--> 1400 mV at 1100 mV [ 0.097971] vdd-core: supplied by vdd-sys-3v3 [ 0.099084] SMPS6: no parameters [ 0.100496] avdd-pll: 1050 mV [ 0.100720] avdd-pll: supplied by vdd-sys-3v3 [ 0.102530] sdhci-vdd-sd-slot: ramp_delay not set [ 0.102704] sdhci-vdd-sd-slot: 2800 mV [ 0.102923] sdhci-vdd-sd-slot: supplied by vdd-sys-3v3 [ 0.103585] SMPS10_OUT2: at 5000 mV [ 0.104098] SMPS10_OUT1: at 5000 mV [ 0.104624] avdd-cam1: 2800 mV [ 0.104839] avdd-cam1: supplied by vdd-sys-3v3 [ 0.105757] avdd-cam2: 2800 mV [ 0.105969] avdd-cam2: supplied by vdd-sys-3v3 [ 0.106881] avdd-dsi-csi: 1200 mV [ 0.107106] avdd-dsi-csi: supplied by vddio-1v8 [ 0.108030] vpp-fuse: 1800 mV [ 0.108247] vpp-fuse: supplied by vdd-sys-3v3 [ 0.109159] LDO5: no parameters [ 0.109374] LDO5: supplied by vdd_ac_bat [ 0.110292] vdd-sensor-2v85: 2850 mV [ 0.110503] vdd-sensor-2v85: supplied by vdd-sys-3v3 [ 0.111438] vdd-af-cam1: 2800 mV [ 0.111649] vdd-af-cam1: supplied by vdd-sys-3v3 [ 0.117123] vdd-rtc: 900 mV [ 0.117336] vdd-rtc: supplied by vdd-ao [ 0.122296] vddio-sdmmc-2: 1800 <--> 3300 mV at 3300 mV [ 0.122507] vddio-sdmmc-2: supplied by sdhci-vdd-sd-slot [ 0.123434] hvdd-usb: 3300 mV [ 0.123646] hvdd-usb: supplied by vdd-sys-5v0 [ 0.127148] avdd-usb: 3300 mV [ 0.127369] avdd-usb: supplied by vdd-sys-5v0 [ 0.128296] rail-3v3: no parameters [ 0.128901] rail-5v0: no parameters [ 0.129337] REGEN3: no parameters [ 0.129491] SYSEN1: no parameters [ 0.129640] SYSEN2: no parameters [ 0.130444] Linux video capture interface: v2.00 [ 0.130503] pps_core: LinuxPPS API ver. 1 registered [ 0.130511] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.130545] PTP clock support registered [ 0.130639] EDAC MC: Ver: 3.0.0 [ 0.131320] platform 70019010.iommu: Driver tegra-smmu requests probe deferral [ 0.131531] Advanced Linux Sound Architecture Driver Initialized. [ 0.132599] Switched to clocksource arch_sys_counter [ 0.143457] NET: Registered protocol family 2 [ 0.143983] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.144072] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.144259] TCP: Hash tables configured (established 8192 bind 8192) [ 0.144306] TCP: reno registered [ 0.144320] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.144362] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.144539] NET: Registered protocol family 1 [ 0.144786] RPC: Registered named UNIX socket transport module. [ 0.144796] RPC: Registered udp transport module. [ 0.144804] RPC: Registered tcp transport module. [ 0.144811] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.144834] PCI: CLS 0 bytes, default 64 [ 0.147018] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.159706] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.160530] NFS: Registering the id_resolver key type [ 0.160582] Key type id_resolver registered [ 0.160591] Key type id_legacy registered [ 0.160659] msgmni has been set to 1464 [ 0.161066] bounce: pool size: 64 pages [ 0.161293] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.161309] io scheduler noop registered [ 0.161322] io scheduler deadline registered [ 0.161543] io scheduler cfq registered (default) [ 0.179793] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 0.245909] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.247863] Serial: IMX driver [ 0.248207] msm_serial: driver initialized [ 0.249097] console [ttyS0] disabled [ 0.249134] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122, base_baud = 25500000) is a Tegra [ 1.368907] console [ttyS0] enabled [ 1.373165] STMicroelectronics ASC driver initialized [ 1.379013] serial: Freescale lpuart driver [ 1.383409] [drm] Initialized drm 1.1.0 20060810 [ 1.389950] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 1.397300] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.403505] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 1.416749] loop: module loaded [ 1.425098] CAN device driver interface [ 1.430999] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.438454] usbcore: registered new interface driver pegasus [ 1.444193] usbcore: registered new interface driver asix [ 1.449656] usbcore: registered new interface driver ax88179_178a [ 1.455804] usbcore: registered new interface driver cdc_ether [ 1.461717] usbcore: registered new interface driver smsc75xx [ 1.467540] usbcore: registered new interface driver smsc95xx [ 1.473342] usbcore: registered new interface driver net1080 [ 1.479057] usbcore: registered new interface driver cdc_subset [ 1.485029] usbcore: registered new interface driver zaurus [ 1.490701] usbcore: registered new interface driver cdc_ncm [ 1.496394] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.502931] ehci-pci: EHCI PCI platform driver [ 1.507422] ehci-platform: EHCI generic platform driver [ 1.512830] ehci-omap: OMAP-EHCI Host Controller driver [ 1.518188] ehci-orion: EHCI orion driver [ 1.522318] SPEAr-ehci: EHCI SPEAr driver [ 1.526463] tegra-ehci: Tegra EHCI driver [ 1.530691] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 1.537823] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.544025] ohci-pci: OHCI PCI platform driver [ 1.548528] ohci-platform: OHCI generic platform driver [ 1.553889] ohci-omap3: OHCI OMAP3 driver [ 1.558034] SPEAr-ohci: OHCI SPEAr driver [ 1.562812] usbcore: registered new interface driver usb-storage [ 1.569395] platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral [ 1.578140] mousedev: PS/2 mouse device common for all mice [ 1.587961] palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps659 as rtc0 [ 1.598827] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.605986] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.612729] i2c /dev entries driver [ 1.617789] usbcore: registered new interface driver uvcvideo [ 1.623538] USB Video Class driver (1.1.1) [ 1.627645] gspca_main: v2.14.0 registered [ 1.632433] sbs-battery 0-000b: sbs_probe: Failed to get device status [ 1.638981] sbs-battery: probe of 0-000b failed with error -121 [ 1.645293] tps65090-charger tps65090-charger: Unable to get charger irq = -22 [ 1.662787] tps65090-charger: probe of tps65090-charger failed with error -22 [ 1.675634] sdhci: Secure Digital Host Controller Interface driver [ 1.681822] sdhci: Copyright(c) Pierre Ossman [ 1.687071] Synopsys Designware Multimedia Card Interface Driver [ 1.693725] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.700150] sdhci-tegra 78000400.sdhci: Got CD GPIO #170. [ 1.705574] sdhci-tegra 78000400.sdhci: Got WP GPIO #132. [ 1.712093] mmc0: no vqmmc regulator found [ 1.716203] mmc0: no vmmc regulator found [ 1.720216] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.762622] mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA [ 1.771077] mmc1: no vqmmc regulator found [ 1.775188] mmc1: no vmmc regulator found [ 1.779202] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.817618] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 1.829696] usbcore: registered new interface driver usbhid [ 1.835282] usbhid: USB HID core driver [ 1.896547] mmc1: BKOPS_EN bit is not set [ 1.904176] mmc1: new high speed MMC card at address 0001 [ 1.909941] mmcblk0: mmc1:0001 SEM32G 29.1 GiB [ 1.914595] mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 1.920622] mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 1.926646] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 1.935022] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 1.942697] mmcblk0boot1: unknown partition table [ 1.948984] mmcblk0boot0: unknown partition table [ 2.254962] tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub [ 2.271491] tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok [ 2.282136] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound/sound/card0/input0 [ 2.291916] TCP: cubic registered [ 2.295254] NET: Registered protocol family 17 [ 2.299720] can: controller area network core (rev 20120528 abi 9) [ 2.305970] NET: Registered protocol family 29 [ 2.310426] can: raw protocol (rev 20120528) [ 2.314706] can: broadcast manager protocol (rev 20120528 t) [ 2.320378] can: netlink gateway (rev 20130117) max_hops=1 [ 2.326253] Key type dns_resolver registered [ 2.331136] ThumbEE CPU extension supported. [ 2.335433] Registering SWP/SWPB emulation handler [ 2.341287] dvdd_ts: 1800 mV [ 2.344644] usb1_vbus: 5000 mV [ 2.347849] usb1_vbus: supplied by vdd-sys-5v0 [ 2.352866] usb2_vbus: 5000 mV [ 2.356044] usb2_vbus: supplied by vdd-sys-5v0 [ 2.361011] vdd_hdmi_5v0: 5000 mV [ 2.364519] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.370420] vdd_cam_1v8_reg: 1800 mV [ 2.374580] VDD_5V0_HDMI_CON: 5000 mV [ 2.378430] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.387123] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.393769] [drm] No driver support for vblank timestamp query. [ 2.449125] Console: switching to colour frame buffer device 240x75 [ 2.476601] host1x drm: fb0: frame buffer device [ 2.481311] host1x drm: registered panic notifier [ 2.497742] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.504211] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.512759] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.518197] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.526833] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.542721] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.549715] hub 1-0:1.0: USB hub found [ 2.553595] hub 1-0:1.0: 1 port detected [ 2.559152] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.566764] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-02-06 05:50:49 UTC (949816249) [ 2.586657] vdd_cam_1v8_reg: disabling [ 2.590845] vdd_hdmi_5v0: disabling [ 2.594376] usb1_vbus: disabling [ 2.597612] dvdd_ts: disabling [ 2.606023] ALSA device list: [ 2.609021] #0: NVIDIA Tegra Dalmore [ 2.614216] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 2.636010] EXT4-fs (mmcblk0p1): recovery complete [ 2.640840] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.648973] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 2.659911] devtmpfs: mounted [ 2.663430] Freeing unused kernel memory: 652K (c0abf000 - c0b62000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 2.867802] usb 1-1: new high-speed USB device number 2 using tegra-ehci