U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32) U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32) TEGRA114 Board: NVIDIA Dalmore I2C: ready DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Tegra114 (Dalmore) # Tegra114 (Dalmore) # usb reset (Re)start USB... USB0: USB EHCI 1.10 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found Tegra114 (Dalmore) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash' Tegra114 (Dalmore) # setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Tegra114 (Dalmore) # tftpboot 0x81000000 zImage.multi_v7_defconfig Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########### 3 MiB/s done Bytes transferred = 4929728 (4b38c0 hex) Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'tegra114-dalmore.dtb'. Load address: 0x82000000 Loading: *### 3.3 MiB/s done Bytes transferred = 34244 (85c4 hex) Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x4b38c0 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.16.0-rc3-78735-g4c83445 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jun 29 15:04:02 PDT 2014 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: NVIDIA Tegra114 Dalmore evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] cma: CMA: reserved 64 MiB at ab800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c0c3f180, node_mem_map ea7d8000 [ 0.000000] DMA zone: 1520 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2574 pages used for memmap [ 0.000000] HighMem zone: 329472 pages, LIFO batch:31 [ 0.000000] Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 1 [ 0.000000] PERCPU: Embedded 8 pages/cpu @ea793000 s8448 r8192 d16128 u32768 [ 0.000000] pcpu-alloc: s8448 r8192 d16128 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522512 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2002172K/2096128K available (6353K kernel code, 891K rwdata, 2564K rodata, 652K init, 304K bss, 93956K reserved, 1317888K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0abda0c (8919 kB) [ 0.000000] .init : 0xc0abe000 - 0xc0b61100 ( 653 kB) [ 0.000000] .data : 0xc0b62000 - 0xc0c40e80 ( 892 kB) [ 0.000000] .bss : 0xc0c40e88 - 0xc0c8cf18 ( 305 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000010] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns [ 0.002056] Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.002079] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns [ 0.002088] Switching to timer-based delay loop [ 0.002378] Console: colour dummy device 80x30 [ 0.002399] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000) [ 0.002414] pid_max: default: 32768 minimum: 301 [ 0.002542] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002554] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003096] CPU: Testing write buffer coherency: ok [ 0.003298] /cpus/cpu@0 missing clock-frequency property [ 0.003322] /cpus/cpu@1 missing clock-frequency property [ 0.003346] /cpus/cpu@2 missing clock-frequency property [ 0.003370] /cpus/cpu@3 missing clock-frequency property [ 0.003382] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003435] Setting up static identity map for 0x80800fd0 - 0x80801068 [ 0.005621] CPU1: Booted secondary processor [ 0.005648] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006142] CPU2: Booted secondary processor [ 0.006166] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.006668] CPU3: Booted secondary processor [ 0.006692] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.006770] Brought up 4 CPUs [ 0.006799] SMP: Total of 4 processors activated. [ 0.006807] CPU: All CPU(s) started in SVC mode. [ 0.007379] devtmpfs: initialized [ 0.013133] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.013585] pinctrl core: initialized pinctrl subsystem [ 0.014023] regulator-dummy: no parameters [ 0.025713] NET: Registered protocol family 16 [ 0.027777] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.029303] cpuidle: using governor ladder [ 0.029317] cpuidle: using governor menu [ 0.041109] No ATAGs? [ 0.041144] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.041155] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.041314] EXYNOS: PMU not supported [ 0.043520] Serial: AMBA PL011 UART driver [ 0.070034] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.070058] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.070622] vdd_ac_bat: 5000 mV [ 0.070855] dvdd_ts: Failed to request enable GPIO61: -517 [ 0.070958] reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517 [ 0.070980] platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral [ 0.071152] usb1_vbus: Failed to request enable GPIO108: -517 [ 0.071246] reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517 [ 0.071268] platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral [ 0.071436] usb2_vbus: Failed to request enable GPIO86: -517 [ 0.071528] reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517 [ 0.071549] platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral [ 0.071713] vdd_hdmi_5v0: 5000 mV [ 0.071755] reg-fixed-voltage regulators:regulator@5: Failed to find supply vin [ 0.071857] reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517 [ 0.071878] platform regulators:regulator@5: Driver reg-fixed-voltage requests probe deferral [ 0.071947] platform regulators:regulator@6: Driver reg-fixed-voltage requests probe deferral [ 0.072136] VDD_5V0_HDMI_CON: Failed to request enable GPIO81: -517 [ 0.072228] reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517 [ 0.072250] platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral [ 0.074337] vgaarb: loaded [ 0.074962] SCSI subsystem initialized [ 0.075139] libata version 3.00 loaded. [ 0.075476] usbcore: registered new interface driver usbfs [ 0.075545] usbcore: registered new interface driver hub [ 0.075644] usbcore: registered new device driver usb [ 0.078827] vdd-cpu: 500 <--> 1520 mV at 1100 mV [ 0.079226] tps65090 2-0048: No cache defaults, reading back from HW [ 0.081265] vdd-sys-5v0: no parameters [ 0.081315] vdd-sys-5v0: supplied by vdd_ac_bat [ 0.082361] vdd-sys-3v3: no parameters [ 0.082406] vdd-sys-3v3: supplied by vdd_ac_bat [ 0.083425] vdd-ao: no parameters [ 0.083468] vdd-ao: supplied by vdd_ac_bat [ 0.083817] vdd-lcd-bl: no parameters [ 0.083859] vdd-lcd-bl: supplied by vdd_ac_bat [ 0.084198] TPS65090_RAILSFET2: no parameters [ 0.084239] TPS65090_RAILSFET2: supplied by vdd_ac_bat [ 0.084579] vdd-modem-3v3: no parameters [ 0.084617] vdd-modem-3v3: supplied by vdd-sys-3v3 [ 0.085131] avdd-lcd: no parameters [ 0.085169] avdd-lcd: supplied by vdd-sys-3v3 [ 0.085670] vdd-lvds: no parameters [ 0.085709] vdd-lvds: supplied by vdd-sys-3v3 [ 0.086515] vdd-sd-slot: no parameters [ 0.086556] vdd-sd-slot: supplied by vdd-sys-3v3 [ 0.087087] vdd-com-3v3: no parameters [ 0.087125] vdd-com-3v3: supplied by vdd-sys-3v3 [ 0.087621] vdd-sby-5v0: no parameters [ 0.087659] vdd-sby-5v0: supplied by vdd_ac_bat [ 0.087832] vdd-sby-3v3: no parameters [ 0.087868] vdd-sby-3v3: supplied by vdd_ac_bat [ 0.088271] genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0x104) [ 0.088592] palmas 2-0058: Irq flag is 0x00000000 [ 0.091150] palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0 [ 0.094227] vddio-ddr: 1350 mV [ 0.094447] vddio-ddr: supplied by vdd-ao [ 0.095854] vddio-1v8: 1800 mV [ 0.096079] vddio-1v8: supplied by vdd-ao [ 0.097645] vdd-core: 900 <--> 1400 mV at 1100 mV [ 0.097863] vdd-core: supplied by vdd-sys-3v3 [ 0.098979] SMPS6: no parameters [ 0.100398] avdd-pll: 1050 mV [ 0.100616] avdd-pll: supplied by vdd-sys-3v3 [ 0.102429] sdhci-vdd-sd-slot: ramp_delay not set [ 0.102603] sdhci-vdd-sd-slot: 2800 mV [ 0.102821] sdhci-vdd-sd-slot: supplied by vdd-sys-3v3 [ 0.103480] SMPS10_OUT2: at 5000 mV [ 0.103998] SMPS10_OUT1: at 5000 mV [ 0.104524] avdd-cam1: 2800 mV [ 0.104740] avdd-cam1: supplied by vdd-sys-3v3 [ 0.105661] avdd-cam2: 2800 mV [ 0.105872] avdd-cam2: supplied by vdd-sys-3v3 [ 0.106785] avdd-dsi-csi: 1200 mV [ 0.106996] avdd-dsi-csi: supplied by vddio-1v8 [ 0.107938] vpp-fuse: 1800 mV [ 0.108155] vpp-fuse: supplied by vdd-sys-3v3 [ 0.109069] LDO5: no parameters [ 0.109283] LDO5: supplied by vdd_ac_bat [ 0.110207] vdd-sensor-2v85: 2850 mV [ 0.110419] vdd-sensor-2v85: supplied by vdd-sys-3v3 [ 0.111353] vdd-af-cam1: 2800 mV [ 0.111564] vdd-af-cam1: supplied by vdd-sys-3v3 [ 0.117105] vdd-rtc: 900 mV [ 0.117318] vdd-rtc: supplied by vdd-ao [ 0.122279] vddio-sdmmc-2: 1800 <--> 3300 mV at 3300 mV [ 0.122498] vddio-sdmmc-2: supplied by sdhci-vdd-sd-slot [ 0.123426] hvdd-usb: 3300 mV [ 0.123638] hvdd-usb: supplied by vdd-sys-5v0 [ 0.127131] avdd-usb: 3300 mV [ 0.127346] avdd-usb: supplied by vdd-sys-5v0 [ 0.128280] rail-3v3: no parameters [ 0.128885] rail-5v0: no parameters [ 0.129315] REGEN3: no parameters [ 0.129472] SYSEN1: no parameters [ 0.129623] SYSEN2: no parameters [ 0.130424] Linux video capture interface: v2.00 [ 0.130480] pps_core: LinuxPPS API ver. 1 registered [ 0.130490] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.130525] PTP clock support registered [ 0.130622] EDAC MC: Ver: 3.0.0 [ 0.131304] platform 70019010.iommu: Driver tegra-smmu requests probe deferral [ 0.131517] Advanced Linux Sound Architecture Driver Initialized. [ 0.132580] Switched to clocksource arch_sys_counter [ 0.143464] NET: Registered protocol family 2 [ 0.143997] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.144086] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.144272] TCP: Hash tables configured (established 8192 bind 8192) [ 0.144319] TCP: reno registered [ 0.144332] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.144373] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.144554] NET: Registered protocol family 1 [ 0.144804] RPC: Registered named UNIX socket transport module. [ 0.144814] RPC: Registered udp transport module. [ 0.144822] RPC: Registered tcp transport module. [ 0.144830] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.144851] PCI: CLS 0 bytes, default 64 [ 0.147023] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.159603] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.160397] NFS: Registering the id_resolver key type [ 0.160432] Key type id_resolver registered [ 0.160441] Key type id_legacy registered [ 0.160507] msgmni has been set to 1464 [ 0.160950] bounce: pool size: 64 pages [ 0.161182] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.161198] io scheduler noop registered [ 0.161212] io scheduler deadline registered [ 0.161427] io scheduler cfq registered (default) [ 0.179585] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 0.245323] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.247257] Serial: IMX driver [ 0.247622] msm_serial: driver initialized [ 0.248524] console [ttyS0] disabled [ 0.248552] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122, base_baud = 25500000) is a Tegra [ 1.368656] console [ttyS0] enabled [ 1.372874] STMicroelectronics ASC driver initialized [ 1.378744] serial: Freescale lpuart driver [ 1.383140] [drm] Initialized drm 1.1.0 20060810 [ 1.389675] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 1.397027] tegra-hdmi 54280000.hdmi: failed to get HDMI regulator [ 1.403234] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 1.416413] loop: module loaded [ 1.424657] CAN device driver interface [ 1.430554] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.438011] usbcore: registered new interface driver pegasus [ 1.443755] usbcore: registered new interface driver asix [ 1.449214] usbcore: registered new interface driver ax88179_178a [ 1.455363] usbcore: registered new interface driver cdc_ether [ 1.461283] usbcore: registered new interface driver smsc75xx [ 1.467107] usbcore: registered new interface driver smsc95xx [ 1.472906] usbcore: registered new interface driver net1080 [ 1.478623] usbcore: registered new interface driver cdc_subset [ 1.484596] usbcore: registered new interface driver zaurus [ 1.490263] usbcore: registered new interface driver cdc_ncm [ 1.495956] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.502492] ehci-pci: EHCI PCI platform driver [ 1.506997] ehci-platform: EHCI generic platform driver [ 1.512399] ehci-omap: OMAP-EHCI Host Controller driver [ 1.517760] ehci-orion: EHCI orion driver [ 1.521888] SPEAr-ehci: EHCI SPEAr driver [ 1.526035] tegra-ehci: Tegra EHCI driver [ 1.530241] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 1.537371] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.543584] ohci-pci: OHCI PCI platform driver [ 1.548089] ohci-platform: OHCI generic platform driver [ 1.553451] ohci-omap3: OHCI OMAP3 driver [ 1.557604] SPEAr-ohci: OHCI SPEAr driver [ 1.562357] usbcore: registered new interface driver usb-storage [ 1.568914] platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral [ 1.577647] mousedev: PS/2 mouse device common for all mice [ 1.587449] palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps659 as rtc0 [ 1.598357] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1 [ 1.605515] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 1.612238] i2c /dev entries driver [ 1.617292] usbcore: registered new interface driver uvcvideo [ 1.623044] USB Video Class driver (1.1.1) [ 1.627144] gspca_main: v2.14.0 registered [ 1.631945] sbs-battery 0-000b: sbs_probe: Failed to get device status [ 1.638492] sbs-battery: probe of 0-000b failed with error -121 [ 1.644801] tps65090-charger tps65090-charger: Unable to get charger irq = -22 [ 1.662770] tps65090-charger: probe of tps65090-charger failed with error -22 [ 1.675674] sdhci: Secure Digital Host Controller Interface driver [ 1.681864] sdhci: Copyright(c) Pierre Ossman [ 1.687106] Synopsys Designware Multimedia Card Interface Driver [ 1.693760] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.700154] sdhci-tegra 78000400.sdhci: Got CD GPIO #170. [ 1.705581] sdhci-tegra 78000400.sdhci: Got WP GPIO #132. [ 1.712102] mmc0: no vqmmc regulator found [ 1.716213] mmc0: no vmmc regulator found [ 1.720227] mmc0: Invalid maximum block size, assuming 512 bytes [ 1.762606] mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA [ 1.771059] mmc1: no vqmmc regulator found [ 1.775173] mmc1: no vmmc regulator found [ 1.779188] mmc1: Invalid maximum block size, assuming 512 bytes [ 1.817602] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 1.829675] usbcore: registered new interface driver usbhid [ 1.835261] usbhid: USB HID core driver [ 1.896535] mmc1: BKOPS_EN bit is not set [ 1.904192] mmc1: new high speed MMC card at address 0001 [ 1.909953] mmcblk0: mmc1:0001 SEM32G 29.1 GiB [ 1.914605] mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 1.920631] mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 1.926648] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 1.935012] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 1.942655] mmcblk0boot1: unknown partition table [ 1.948924] mmcblk0boot0: unknown partition table [ 2.254945] tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub [ 2.271472] tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok [ 2.282089] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound/sound/card0/input0 [ 2.291870] TCP: cubic registered [ 2.295214] NET: Registered protocol family 17 [ 2.299686] can: controller area network core (rev 20120528 abi 9) [ 2.305933] NET: Registered protocol family 29 [ 2.310397] can: raw protocol (rev 20120528) [ 2.314682] can: broadcast manager protocol (rev 20120528 t) [ 2.320360] can: netlink gateway (rev 20130117) max_hops=1 [ 2.326272] Key type dns_resolver registered [ 2.331151] ThumbEE CPU extension supported. [ 2.335448] Registering SWP/SWPB emulation handler [ 2.341318] dvdd_ts: 1800 mV [ 2.344671] usb1_vbus: 5000 mV [ 2.347869] usb1_vbus: supplied by vdd-sys-5v0 [ 2.353036] usb2_vbus: 5000 mV [ 2.356232] usb2_vbus: supplied by vdd-sys-5v0 [ 2.361638] vdd_hdmi_5v0: 5000 mV [ 2.365140] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.372490] vdd_cam_1v8_reg: 1800 mV [ 2.376635] VDD_5V0_HDMI_CON: 5000 mV [ 2.380445] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.390196] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.396843] [drm] No driver support for vblank timestamp query. [ 2.452520] Console: switching to colour frame buffer device 240x75 [ 2.479943] host1x drm: fb0: frame buffer device [ 2.484659] host1x drm: registered panic notifier [ 2.502757] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.509230] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.517947] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.523379] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.531914] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.547737] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.554630] hub 1-0:1.0: USB hub found [ 2.558446] hub 1-0:1.0: 1 port detected [ 2.563936] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.571715] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-27 23:28:26 UTC (949015706) [ 2.591271] vdd_cam_1v8_reg: disabling [ 2.595500] vdd_hdmi_5v0: disabling [ 2.599030] usb1_vbus: disabling [ 2.602254] dvdd_ts: disabling [ 2.610604] ALSA device list: [ 2.613614] #0: NVIDIA Tegra Dalmore [ 2.618854] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 2.640460] EXT4-fs (mmcblk0p1): recovery complete [ 2.645287] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.653421] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 2.664178] devtmpfs: mounted [ 2.667706] Freeing unused kernel memory: 652K (c0abe000 - c0b61000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell root@(none):/# [ 2.867783] usb 1-1: new high-speed USB device number 2 using tegra-ehci