Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2014-06-15 21:25:34.844578573 -0700
+++ /tmp/foob	2014-06-15 21:25:34.844578573 -0700
@@ -35,29 +35,30 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ############################################################
-	 3.5 MiB/s
+	 #################################################################
+	 ###########
+	 3.1 MiB/s
 done
-Bytes transferred = 4686600 (478308 hex)
+Bytes transferred = 4917880 (4b0a78 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.9 MiB/s
+	 3 MiB/s
 done
-Bytes transferred = 33963 (84ab hex)
+Bytes transferred = 34244 (85c4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x478308 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x4b0a78 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff4000, end 8ffff4aa ... OK
+   Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 3.15.0-65945-g1860e37 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jun 8 11:39:19 PDT 2014
+Linux version 3.16.0-rc1-78023-g7171511 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jun 15 21:04:45 PDT 2014
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
@@ -65,42 +66,45 @@
 cma: CMA: reserved 64 MiB at ab800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0ba1c00, node_mem_map ea7d9000
+free_area_init_node: node 0, pgdat c0c38ac0, node_mem_map ea7d8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
   HighMem zone: 2574 pages used for memmap
   HighMem zone: 329472 pages, LIFO batch:31
 Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 1
-PERCPU: Embedded 7 pages/cpu @ea794000 s8192 r8192 d12288 u32768
-pcpu-alloc: s8192 r8192 d12288 u32768 alloc=8*4096
+PERCPU: Embedded 8 pages/cpu @ea793000 s8448 r8192 d16128 u32768
+pcpu-alloc: s8448 r8192 d16128 u32768 alloc=8*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2002832K/2096128K available (6059K kernel code, 798K rwdata, 2432K rodata, 548K init, 289K bss, 93296K reserved, 1317888K highmem)
+Memory: 2002196K/2096128K available (6333K kernel code, 889K rwdata, 2556K rodata, 652K init, 304K bss, 93932K reserved, 1317888K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
-    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
+    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0a52e40   (8492 kB)
-      .init : 0xc0a53000 - 0xc0adc000   ( 548 kB)
-      .data : 0xc0adc000 - 0xc0ba38a0   ( 799 kB)
-       .bss : 0xc0ba38a8 - 0xc0bec090   ( 290 kB)
+      .text : 0xc0208000 - 0xc0ab6808   (8891 kB)
+      .init : 0xc0ab7000 - 0xc0b5a100   ( 653 kB)
+      .data : 0xc0b5c000 - 0xc0c3a7c0   ( 890 kB)
+       .bss : 0xc0c3a7c8 - 0xc0c86858   ( 305 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
+	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
 NR_IRQS:16 nr_irqs:16 16
+L2C: failed to init: -19
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
 Architected cp15 timer(s) running at 12.00MHz (virt).
 sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
 Switching to timer-based delay loop
 Console: colour dummy device 80x30
-Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000)
 pid_max: default: 32768 minimum: 301
 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
@@ -110,7 +114,7 @@
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x807b9c50 - 0x807b9ce8
+Setting up static identity map for 0x807fb970 - 0x807fba08
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: Booted secondary processor
@@ -129,23 +133,30 @@
 cpuidle: using governor ladder
 cpuidle: using governor menu
 No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 8 bytes.
+EXYNOS: PMU not supported
 Serial: AMBA PL011 UART driver
 edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
 edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
 vdd_ac_bat: 5000 mV 
 dvdd_ts: Failed to request enable GPIO61: -517
-reg-fixed-voltage 1.regulator: Failed to register regulator: -517
-platform 1.regulator: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517
+platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral
 usb1_vbus: Failed to request enable GPIO108: -517
-reg-fixed-voltage 3.regulator: Failed to register regulator: -517
-platform 3.regulator: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
+platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
 usb2_vbus: Failed to request enable GPIO86: -517
-reg-fixed-voltage 4.regulator: Failed to register regulator: -517
-platform 4.regulator: Driver reg-fixed-voltage requests probe deferral
-vdd_hdmi_5v0: Failed to request enable GPIO81: -517
-reg-fixed-voltage 5.regulator: Failed to register regulator: -517
-platform 5.regulator: Driver reg-fixed-voltage requests probe deferral
-platform 6.regulator: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
+platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
+vdd_hdmi_5v0: 5000 mV 
+reg-fixed-voltage regulators:regulator@5: Failed to find supply vin
+reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
+platform regulators:regulator@5: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@6: Driver reg-fixed-voltage requests probe deferral
+VDD_5V0_HDMI_CON: Failed to request enable GPIO81: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
+platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
 vgaarb: loaded
 SCSI subsystem initialized
 libata version 3.00 loaded.
@@ -178,7 +189,7 @@
 vdd-sby-5v0: supplied by vdd_ac_bat
 vdd-sby-3v3: no parameters
 vdd-sby-3v3: supplied by vdd_ac_bat
-genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0xfc)
+genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0x104)
 palmas 2-0058: Irq flag is 0x00000000
 palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
 vddio-ddr: 1350 mV 
@@ -212,15 +223,8 @@
 vdd-rtc: supplied by vdd-ao
 vddio-sdmmc-2: 1800 <--> 3300 mV at 3300 mV 
 vddio-sdmmc-2: supplied by sdhci-vdd-sd-slot
-hvdd-usb: 3300 mV 
-hvdd-usb: supplied by vdd-sys-5v0
-avdd-usb: 3300 mV 
-avdd-usb: supplied by vdd-sys-5v0
-rail-3v3: no parameters
-rail-5v0: no parameters
-REGEN3: no parameters
-SYSEN1: no parameters
-SYSEN2: no parameters
+palmas-pmic 7000d000.i2c:tps65913@58:pmic: failed to register 7000d000.i2c:tps65913@58:pmic regulator
+palmas-pmic: probe of 7000d000.i2c:tps65913@58:pmic failed with error -1
 Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
@@ -243,12 +247,12 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 64
 futex hash table entries: 1024 (order: 4, 65536 bytes)
-bounce pool size: 64 pages
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
 Key type id_resolver registered
 Key type id_legacy registered
-msgmni has been set to 1465
+msgmni has been set to 1464
+bounce: pool size: 64 pages
 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
 io scheduler noop registered
 io scheduler deadline registered
@@ -263,11 +267,12 @@
 STMicroelectronics ASC driver initialized
 serial: Freescale lpuart driver
 [drm] Initialized drm 1.1.0 20060810
+tegra-dsi 54300000.dsi: cannot get VDD supply
 platform 54300000.dsi: Driver tegra-dsi requests probe deferral
-tegra-hdmi 54280000.hdmi: failed to get VDD regulator
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
 loop: module loaded
-m25p80 spi32766.0: w25q32dw (4096 Kbytes)
+CAN device driver interface
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
 usbcore: registered new interface driver asix
@@ -287,10 +292,15 @@
 SPEAr-ehci: EHCI SPEAr driver
 tegra-ehci: Tegra EHCI driver
 platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-omap3: OHCI OMAP3 driver
+SPEAr-ohci: OHCI SPEAr driver
 usbcore: registered new interface driver usb-storage
 platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
 mousedev: PS/2 mouse device common for all mice
-palmas-rtc rtc.8: rtc core: registered rtc.8 as rtc0
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps659 as rtc0
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 i2c /dev entries driver
@@ -301,34 +311,22 @@
 sbs-battery: probe of 0-000b failed with error -121
 tps65090-charger tps65090-charger: Unable to get charger irq = -22
 tps65090-charger: probe of tps65090-charger failed with error -22
+i2c 0-004c: Driver lm90 requests probe deferral
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
-sdhci-pltfm: SDHCI platform and OF driver helper
-sdhci-tegra 78000400.sdhci: Got CD GPIO #170.
-mmc0: no vqmmc regulator found
-mmc0: no vmmc regulator found
-mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA
-mmc1: no vqmmc regulator found
-mmc1: no vmmc regulator found
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
+Synopsys Designware Multimedia Card Interface Driver
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-mmc1: BKOPS_EN bit is not set
-mmc1: new HS200 MMC card at address 0001
-mmcblk0: mmc1:0001 SEM32G 29.1 GiB 
-mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
-mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
-mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
- mmcblk0boot1: unknown partition table
- mmcblk0boot0: unknown partition table
 tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
-tegra-snd-rt5640 sound.5: rt5640-aif1 <-> 70080400.i2s mapping ok
-input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0
+tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
+input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound/sound/card0/input0
 TCP: cubic registered
 NET: Registered protocol family 17
+can: controller area network core (rev 20120528 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20120528)
+can: broadcast manager protocol (rev 20120528 t)
+can: netlink gateway (rev 20130117) max_hops=1
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
@@ -340,30 +338,48 @@
 vdd_hdmi_5v0: 5000 mV 
 vdd_hdmi_5v0: supplied by vdd-sys-5v0
 vdd_cam_1v8_reg: 1800 mV 
-[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
-[drm] No driver support for vblank timestamp query.
-Console: switching to colour frame buffer device 240x75
-host1x drm: fb0:  frame buffer device
-host1x drm: registered panic notifier
-[drm] Initialized tegra 0.0.0 20120330 on minor 0
+VDD_5V0_HDMI_CON: 5000 mV 
+VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
+tegra-dsi 54300000.dsi: cannot get VDD supply
+platform 54300000.dsi: Driver tegra-dsi requests probe deferral
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
 platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+i2c 0-004c: Driver lm90 requests probe deferral
+tegra-dsi 54300000.dsi: cannot get VDD supply
+platform 54300000.dsi: Driver tegra-dsi requests probe deferral
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
 tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
-input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1
-palmas-rtc rtc.8: setting system clock to 2000-01-06 20:01:48 UTC (947188908)
+i2c 0-004c: Driver lm90 requests probe deferral
+tegra-dsi 54300000.dsi: cannot get VDD supply
+platform 54300000.dsi: Driver tegra-dsi requests probe deferral
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+input: gpio-keys as /devices/soc0/gpio-keys/input/input1
+i2c 0-004c: Driver lm90 requests probe deferral
+tegra-dsi 54300000.dsi: cannot get VDD supply
+platform 54300000.dsi: Driver tegra-dsi requests probe deferral
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-14 05:28:27 UTC (947827707)
+VDD_5V0_HDMI_CON: disabling
+vdd_cam_1v8_reg: disabling
+vdd_hdmi_5v0: disabling
+usb1_vbus: disabling
+dvdd_ts: disabling
 ALSA device list:
   #0: NVIDIA Tegra Dalmore
-EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-EXT4-fs (mmcblk0p1): recovery complete
-EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
-devtmpfs: mounted
-Freeing unused kernel memory: 548K (c0a53000 - c0adc000)
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+Waiting for root device /dev/mmcblk0p1...
 usb 1-1: new high-speed USB device number 2 using tegra-ehci
-root@(none):/# 
\ No newline at end of file
+asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0d:b5:16
+i2c 0-004c: Driver lm90 requests probe deferral
+tegra-dsi 54300000.dsi: cannot get VDD supply
+platform 54300000.dsi: Driver tegra-dsi requests probe deferral
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2014-06-15 21:25:34.860578577 -0700
+++ /tmp/foob	2014-06-15 21:25:34.860578577 -0700
@@ -35,24 +35,24 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ####################################
+	 #########################################
 	 3.3 MiB/s
 done
-Bytes transferred = 4341400 (423e98 hex)
+Bytes transferred = 4417680 (436890 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 2.7 MiB/s
+	 3.3 MiB/s
 done
-Bytes transferred = 33963 (84ab hex)
+Bytes transferred = 34244 (85c4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x423e98 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x436890 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff4000, end 8ffff4aa ... OK
+   Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK
 
 Starting kernel ...
 
@@ -60,7 +60,7 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 3.15.0-65945-g1860e37 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jun 8 11:35:19 PDT 2014
+Linux version 3.16.0-rc1-78023-g7171511 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jun 15 21:05:43 PDT 2014
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
@@ -68,35 +68,36 @@
 cma: CMA: reserved 64 MiB at ab800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0851580, node_mem_map ea7d8000
+free_area_init_node: node 0, pgdat c0873100, node_mem_map ea7d7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
   HighMem zone: 2574 pages used for memmap
   HighMem zone: 329472 pages, LIFO batch:31
 Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 1
-PERCPU: Embedded 8 pages/cpu @ea793000 s9152 r8192 d15424 u32768
-pcpu-alloc: s9152 r8192 d15424 u32768 alloc=8*4096
+PERCPU: Embedded 8 pages/cpu @ea792000 s8768 r8192 d15808 u32768
+pcpu-alloc: s8768 r8192 d15808 u32768 alloc=8*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2004104K/2096128K available (5920K kernel code, 331K rwdata, 1972K rodata, 260K init, 344K bss, 92024K reserved, 1317888K highmem)
+Memory: 2003956K/2096128K available (6031K kernel code, 330K rwdata, 1992K rodata, 264K init, 357K bss, 92172K reserved, 1317888K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
-    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
+    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc07bd4f0   (7894 kB)
-      .init : 0xc07be000 - 0xc07ff3c0   ( 261 kB)
-      .data : 0xc0800000 - 0xc0852dc0   ( 332 kB)
-       .bss : 0xc0852dcc - 0xc08a9188   ( 345 kB)
+      .text : 0xc0008000 - 0xc07de244   (8025 kB)
+      .init : 0xc07df000 - 0xc0821240   ( 265 kB)
+      .data : 0xc0822000 - 0xc0874a40   ( 331 kB)
+       .bss : 0xc0874a4c - 0xc08cdfbc   ( 358 kB)
 Preemptible hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
+L2C: failed to init: -19
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
 Architected cp15 timer(s) running at 12.00MHz (virt).
 sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
@@ -106,15 +107,15 @@
 pid_max: default: 32768 minimum: 301
 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
-Initializing cgroup subsys debug
 Initializing cgroup subsys freezer
+Initializing cgroup subsys debug
 CPU: Testing write buffer coherency: ok
 /cpus/cpu@0 missing clock-frequency property
 /cpus/cpu@1 missing clock-frequency property
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x8059ccf0 - 0x8059cd88
+Setting up static identity map for 0x805b7418 - 0x805b74b0
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: Booted secondary processor
@@ -137,18 +138,22 @@
 hw-breakpoint: maximum watchpoint size is 8 bytes.
 vdd_ac_bat: 5000 mV 
 dvdd_ts: Failed to request enable GPIO61: -517
-reg-fixed-voltage 1.regulator: Failed to register regulator: -517
-platform 1.regulator: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@1: Failed to register regulator: -517
+platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral
 usb1_vbus: Failed to request enable GPIO108: -517
-reg-fixed-voltage 3.regulator: Failed to register regulator: -517
-platform 3.regulator: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
+platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
 usb2_vbus: Failed to request enable GPIO86: -517
-reg-fixed-voltage 4.regulator: Failed to register regulator: -517
-platform 4.regulator: Driver reg-fixed-voltage requests probe deferral
-vdd_hdmi_5v0: Failed to request enable GPIO81: -517
-reg-fixed-voltage 5.regulator: Failed to register regulator: -517
-platform 5.regulator: Driver reg-fixed-voltage requests probe deferral
-platform 6.regulator: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
+platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
+vdd_hdmi_5v0: 5000 mV 
+reg-fixed-voltage regulators:regulator@5: Failed to find supply vin
+reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
+platform regulators:regulator@5: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@6: Driver reg-fixed-voltage requests probe deferral
+VDD_5V0_HDMI_CON: Failed to request enable GPIO81: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
+platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
 vgaarb: loaded
 SCSI subsystem initialized
 usbcore: registered new interface driver usbfs
@@ -214,15 +219,8 @@
 vdd-rtc: supplied by vdd-ao
 vddio-sdmmc-2: 1800 <--> 3300 mV at 3300 mV 
 vddio-sdmmc-2: supplied by sdhci-vdd-sd-slot
-hvdd-usb: 3300 mV 
-hvdd-usb: supplied by vdd-sys-5v0
-avdd-usb: 3300 mV 
-avdd-usb: supplied by vdd-sys-5v0
-rail-3v3: no parameters
-rail-5v0: no parameters
-REGEN3: no parameters
-SYSEN1: no parameters
-SYSEN2: no parameters
+palmas-pmic 7000d000.i2c:tps65913@58:pmic: failed to register 7000d000.i2c:tps65913@58:pmic regulator
+palmas-pmic: probe of 7000d000.i2c:tps65913@58:pmic failed with error -1
 Linux video capture interface: v2.00
 platform 70019010.iommu: Driver tegra-smmu requests probe deferral
 Advanced Linux Sound Architecture Driver Initialized.
@@ -248,9 +246,9 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 64
 futex hash table entries: 1024 (order: 4, 65536 bytes)
-bounce pool size: 64 pages
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
-msgmni has been set to 1468
+msgmni has been set to 1467
+bounce: pool size: 64 pages
 io scheduler noop registered (default)
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
@@ -258,11 +256,13 @@
 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
 [drm] Initialized drm 1.1.0 20060810
+tegra-dsi 54300000.dsi: cannot get VDD supply
 platform 54300000.dsi: Driver tegra-dsi requests probe deferral
-tegra-hdmi 54280000.hdmi: failed to get VDD regulator
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
 loop: module loaded
 m25p80 spi32766.0: w25q32dw (4096 Kbytes)
+CAN device driver interface
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
 usbcore: registered new interface driver asix
@@ -284,7 +284,7 @@
 usbcore: registered new interface driver usb-storage
 platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
 mousedev: PS/2 mouse device common for all mice
-palmas-rtc rtc.8: rtc core: registered rtc.8 as rtc0
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: rtc core: registered 7000d000.i2c:tps659 as rtc0
 tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
 usbcore: registered new interface driver uvcvideo
@@ -294,10 +294,12 @@
 sbs-battery: probe of 0-000b failed with error -121
 tps65090-charger tps65090-charger: Unable to get charger irq = -22
 tps65090-charger: probe of tps65090-charger failed with error -22
+i2c 0-004c: Driver lm90 requests probe deferral
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
 sdhci-tegra 78000400.sdhci: Got CD GPIO #170.
+sdhci-tegra 78000400.sdhci: Got WP GPIO #132.
 mmc0: no vqmmc regulator found
 mmc0: no vmmc regulator found
 mmc0: Invalid maximum block size, assuming 512 bytes
@@ -309,7 +311,7 @@
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
 mmc1: BKOPS_EN bit is not set
-mmc1: new HS200 MMC card at address 0001
+mmc1: new high speed MMC card at address 0001
 mmcblk0: mmc1:0001 SEM32G 29.1 GiB 
 mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
 mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
@@ -318,14 +320,19 @@
  mmcblk0boot1: unknown partition table
  mmcblk0boot0: unknown partition table
 tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
-tegra-snd-rt5640 sound.5: rt5640-aif1 <-> 70080400.i2s mapping ok
-input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0
+tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
+input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound/sound/card0/input0
 TCP: cubic registered
 NET: Registered protocol family 10
 mip6: Mobile IPv6
 sit: IPv6 over IPv4 tunneling driver
 NET: Registered protocol family 17
 NET: Registered protocol family 15
+can: controller area network core (rev 20120528 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20120528)
+can: broadcast manager protocol (rev 20120528 t)
+can: netlink gateway (rev 20130117) max_hops=1
 Bluetooth: RFCOMM socket layer initialized
 Bluetooth: RFCOMM ver 1.11
 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
@@ -341,21 +348,41 @@
 vdd_hdmi_5v0: 5000 mV 
 vdd_hdmi_5v0: supplied by vdd-sys-5v0
 vdd_cam_1v8_reg: 1800 mV 
-[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
-[drm] No driver support for vblank timestamp query.
-Console: switching to colour frame buffer device 240x75
-host1x drm: fb0:  frame buffer device
-host1x drm: registered panic notifier
-[drm] Initialized tegra 0.0.0 20120330 on minor 0
+VDD_5V0_HDMI_CON: 5000 mV 
+VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0
+tegra-dsi 54300000.dsi: cannot get VDD supply
+platform 54300000.dsi: Driver tegra-dsi requests probe deferral
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
 platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+i2c 0-004c: Driver lm90 requests probe deferral
+tegra-dsi 54300000.dsi: cannot get VDD supply
+platform 54300000.dsi: Driver tegra-dsi requests probe deferral
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
 tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
-input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1
-palmas-rtc rtc.8: setting system clock to 2000-01-06 19:58:55 UTC (947188735)
+i2c 0-004c: Driver lm90 requests probe deferral
+tegra-dsi 54300000.dsi: cannot get VDD supply
+platform 54300000.dsi: Driver tegra-dsi requests probe deferral
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+input: gpio-keys as /devices/soc0/gpio-keys/input/input1
+i2c 0-004c: Driver lm90 requests probe deferral
+tegra-dsi 54300000.dsi: cannot get VDD supply
+platform 54300000.dsi: Driver tegra-dsi requests probe deferral
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-14 05:30:23 UTC (947827823)
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+VDD_5V0_HDMI_CON: disabling
+vdd_cam_1v8_reg: disabling
+vdd_hdmi_5v0: disabling
+usb1_vbus: disabling
+dvdd_ts: disabling
 ALSA device list:
   #0: NVIDIA Tegra Dalmore
 kjournald starting.  Commit interval 5 seconds
@@ -364,7 +391,7 @@
 EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 260K (c07be000 - c07ff000)
+Freeing unused kernel memory: 264K (c07df000 - c0821000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.850042] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.962060] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2014-06-15 21:25:34.864578578 -0700
+++ /tmp/foob	2014-06-15 21:25:34.868578578 -0700
@@ -35,29 +35,30 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ############################################################
-	 3.4 MiB/s
+	 #################################################################
+	 ###########
+	 3.6 MiB/s
 done
-Bytes transferred = 4686600 (478308 hex)
+Bytes transferred = 4917880 (4b0a78 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *##
-	 2.9 MiB/s
+	 2.6 MiB/s
 done
-Bytes transferred = 23973 (5da5 hex)
+Bytes transferred = 24197 (5e85 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x478308 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x4b0a78 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff7000, end 8ffffda4 ... OK
+   Loading Device Tree to 8fff7000, end 8ffffe84 ... OK
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 3.15.0-65945-g1860e37 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jun 8 11:39:19 PDT 2014
+Linux version 3.16.0-rc1-78023-g7171511 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jun 15 21:04:45 PDT 2014
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -65,7 +66,7 @@
 cma: CMA: reserved 64 MiB at ab800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0ba1c00, node_mem_map ea7d9000
+free_area_init_node: node 0, pgdat c0c38ac0, node_mem_map ea7d8000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
@@ -74,40 +75,49 @@
 fuse_speedo_calib: ATE prog ver 3.3
 Tegra30: CPU Speedo ID 5, Soc Speedo ID 2
 Tegra Revision: A03 SKU: 128 CPU Process: 4 Core Process: 0
-L310 cache controller enabled
-l2x0: 8 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e480001, Cache size: 1024 kB
-PERCPU: Embedded 7 pages/cpu @ea79e000 s8192 r8192 d12288 u32768
-pcpu-alloc: s8192 r8192 d12288 u32768 alloc=8*4096
+PERCPU: Embedded 8 pages/cpu @ea79d000 s8448 r8192 d16128 u32768
+pcpu-alloc: s8448 r8192 d16128 u32768 alloc=8*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2002884K/2096128K available (6059K kernel code, 798K rwdata, 2432K rodata, 548K init, 289K bss, 93244K reserved, 1317888K highmem)
+Memory: 2002248K/2096128K available (6333K kernel code, 889K rwdata, 2556K rodata, 652K init, 304K bss, 93880K reserved, 1317888K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
-    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
+    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0a52e40   (8492 kB)
-      .init : 0xc0a53000 - 0xc0adc000   ( 548 kB)
-      .data : 0xc0adc000 - 0xc0ba38a0   ( 799 kB)
-       .bss : 0xc0ba38a8 - 0xc0bec090   ( 290 kB)
+      .text : 0xc0208000 - 0xc0ab6808   (8891 kB)
+      .init : 0xc0ab7000 - 0xc0b5a100   ( 653 kB)
+      .data : 0xc0b5c000 - 0xc0c3a7c0   ( 890 kB)
+       .bss : 0xc0c3a7c8 - 0xc0c86858   ( 305 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
+	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
 NR_IRQS:16 nr_irqs:16 16
+L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C-310 erratum 769419 enabled
+L2C-310 enabling early BRESP for Cortex-A9
+L2C-310: enabling full line of zeros but not enabled in Cortex-A9
+L2C-310 ID prefetch enabled, offset 1 lines
+L2C-310 dynamic clock gating enabled, standby mode enabled
+L2C-310 cache controller enabled, 8 ways, 1024 kB
+L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e480001
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
 Console: colour dummy device 80x30
-Calibrating delay loop... 2793.47 BogoMIPS (lpj=13967360)
+Calibrating delay loop... 2795.11 BogoMIPS (lpj=6987776)
 pid_max: default: 32768 minimum: 301
 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x807b9c50 - 0x807b9ce8
+Setting up static identity map for 0x807fb970 - 0x807fba08
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: Booted secondary processor
@@ -126,25 +136,32 @@
 cpuidle: using governor ladder
 cpuidle: using governor menu
 No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 4 bytes.
+EXYNOS: PMU not supported
 Serial: AMBA PL011 UART driver
 edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
 edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
 vdd_5v_in: 5000 mV 
-platform 1.regulator: Driver reg-fixed-voltage requests probe deferral
-platform 2.regulator: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@2: Driver reg-fixed-voltage requests probe deferral
 vdd_5v_sata: Failed to request enable GPIO30: -517
-reg-fixed-voltage 3.regulator: Failed to register regulator: -517
-platform 3.regulator: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
+platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
 usb1_vbus: Failed to request enable GPIO238: -517
-reg-fixed-voltage 4.regulator: Failed to register regulator: -517
-platform 4.regulator: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
+platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
 usb3_vbus: Failed to request enable GPIO236: -517
-reg-fixed-voltage 5.regulator: Failed to register regulator: -517
-platform 5.regulator: Driver reg-fixed-voltage requests probe deferral
-platform 6.regulator: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
+platform regulators:regulator@5: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@6: Driver reg-fixed-voltage requests probe deferral
 sys_3v3_pexs: Failed to request enable GPIO95: -517
-reg-fixed-voltage 7.regulator: Failed to register regulator: -517
-platform 7.regulator: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
+platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
++VDD_5V_HDMI: 5000 mV 
+reg-fixed-voltage regulators:regulator@8: Failed to find supply vin
+reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
+platform regulators:regulator@8: Driver reg-fixed-voltage requests probe deferral
 vgaarb: loaded
 SCSI subsystem initialized
 libata version 3.00 loaded.
@@ -194,13 +211,14 @@
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 64
+hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
 futex hash table entries: 1024 (order: 4, 65536 bytes)
-bounce pool size: 64 pages
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
 Key type id_resolver registered
 Key type id_legacy registered
-msgmni has been set to 1465
+msgmni has been set to 1464
+bounce: pool size: 64 pages
 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
 io scheduler noop registered
 io scheduler deadline registered
@@ -216,10 +234,10 @@
 STMicroelectronics ASC driver initialized
 serial: Freescale lpuart driver
 [drm] Initialized drm 1.1.0 20060810
-tegra-hdmi 54280000.hdmi: failed to get VDD regulator
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
 loop: module loaded
-m25p80 spi32766.1: w25q32 (4096 Kbytes)
+CAN device driver interface
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
 usbcore: registered new interface driver asix
@@ -240,6 +258,11 @@
 tegra-ehci: Tegra EHCI driver
 platform 7d004000.usb: Driver tegra-ehci requests probe deferral
 platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-omap3: OHCI OMAP3 driver
+SPEAr-ohci: OHCI SPEAr driver
 usbcore: registered new interface driver usb-storage
 platform 7d004000.usb-phy: Driver tegra-phy requests probe deferral
 platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
@@ -253,37 +276,22 @@
 gspca_main: v2.14.0 registered
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
-sdhci-pltfm: SDHCI platform and OF driver helper
-sdhci-tegra 78000000.sdhci: Got CD GPIO #69.
-sdhci-tegra 78000000.sdhci: Got WP GPIO #155.
-mmc0: no vqmmc regulator found
-mmc0: no vmmc regulator found
-mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA
-mmc1: no vqmmc regulator found
-mmc1: no vmmc regulator found
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
+Synopsys Designware Multimedia Card Interface Driver
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-mmc1: new high speed MMC card at address 0001
-mmcblk0: mmc1:0001 SEM16G 14.8 GiB 
-mmcblk0boot0: mmc1:0001 SEM16G partition 1 1.00 MiB
-mmcblk0boot1: mmc1:0001 SEM16G partition 2 1.00 MiB
-mmcblk0rpmb: mmc1:0001 SEM16G partition 3 128 KiB
-Primary GPT is invalid, using alternate GPT.
- mmcblk0: p1 p2 p3 p4 p5
- mmcblk0boot1: unknown partition table
- mmcblk0boot0: unknown partition table
 tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
-tegra-snd-rt5640 sound.4: rt5640-aif1 <-> 70080400.i2s mapping ok
-input: NVIDIA Tegra Beaver Headphones as /devices/soc0/sound.4/sound/card0/input0
+tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
+input: NVIDIA Tegra Beaver Headphones as /devices/soc0/sound/sound/card0/input0
 TCP: cubic registered
 NET: Registered protocol family 17
+can: controller area network core (rev 20120528 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20120528)
+can: broadcast manager protocol (rev 20120528 t)
+can: netlink gateway (rev 20130117) max_hops=1
 Key type dns_resolver registered
 ThumbEE CPU extension supported.
 Registering SWP/SWPB emulation handler
-vdd_sata,avdd_plle: disabling
 chargepump_5v: 5000 mV 
 vdd_ddr: 1500 mV 
 vdd_ddr: supplied by vdd_5v_in
@@ -297,6 +305,8 @@
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
 sys_3v3_pexs: 3300 mV 
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
++VDD_5V_HDMI: 5000 mV 
++VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 tegra-pcie 3000.pcie-controller: 2x3 configuration
 tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
 tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
@@ -332,7 +342,7 @@
 pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 r8169 0000:01:00.0: enabling device (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf002e000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 472
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 472
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -357,16 +367,9 @@
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
+usb1_vbus: disabling
 ALSA device list:
   #0: NVIDIA Tegra Beaver
-EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended
-EXT4-fs (mmcblk0p1): recovery complete
-EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
-devtmpfs: mounted
-Freeing unused kernel memory: 548K (c0a53000 - c0adc000)
+Waiting for root device /dev/mmcblk0p1...
 usb 2-1: new high-speed USB device number 2 using tegra-ehci
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-root@(none):/# [    4.714404] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:68:6d
+asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:68:6d
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2014-06-15 21:25:34.872578579 -0700
+++ /tmp/foob	2014-06-15 21:25:34.872578579 -0700
@@ -35,10 +35,10 @@
 	 #################################################################
 	 #################################################################
 	 #################################################################
-	 ####################################
-	 3.3 MiB/s
+	 #########################################
+	 3.6 MiB/s
 done
-Bytes transferred = 4341400 (423e98 hex)
+Bytes transferred = 4417680 (436890 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
@@ -47,12 +47,12 @@
 Loading: *##
 	 2.9 MiB/s
 done
-Bytes transferred = 23973 (5da5 hex)
+Bytes transferred = 24197 (5e85 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x423e98 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x436890 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff7000, end 8ffffda4 ... OK
+   Loading Device Tree to 8fff7000, end 8ffffe84 ... OK
 
 Starting kernel ...
 
@@ -60,7 +60,7 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 3.15.0-65945-g1860e37 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jun 8 11:35:19 PDT 2014
+Linux version 3.16.0-rc1-78023-g7171511 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jun 15 21:05:43 PDT 2014
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -68,7 +68,7 @@
 cma: CMA: reserved 64 MiB at ab800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0851580, node_mem_map ea7d8000
+free_area_init_node: node 0, pgdat c0873100, node_mem_map ea7d7000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
@@ -77,41 +77,48 @@
 fuse_speedo_calib: ATE prog ver 3.3
 Tegra30: CPU Speedo ID 5, Soc Speedo ID 2
 Tegra Revision: A03 SKU: 128 CPU Process: 4 Core Process: 0
-L310 cache controller enabled
-l2x0: 8 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e480001, Cache size: 1024 kB
-PERCPU: Embedded 8 pages/cpu @ea79d000 s9152 r8192 d15424 u32768
-pcpu-alloc: s9152 r8192 d15424 u32768 alloc=8*4096
+PERCPU: Embedded 8 pages/cpu @ea79c000 s8768 r8192 d15808 u32768
+pcpu-alloc: s8768 r8192 d15808 u32768 alloc=8*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
 Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2004156K/2096128K available (5920K kernel code, 331K rwdata, 1972K rodata, 260K init, 344K bss, 91972K reserved, 1317888K highmem)
+Memory: 2004008K/2096128K available (6031K kernel code, 330K rwdata, 1992K rodata, 264K init, 357K bss, 92120K reserved, 1317888K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
-    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
+    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc07bd4f0   (7894 kB)
-      .init : 0xc07be000 - 0xc07ff3c0   ( 261 kB)
-      .data : 0xc0800000 - 0xc0852dc0   ( 332 kB)
-       .bss : 0xc0852dcc - 0xc08a9188   ( 345 kB)
+      .text : 0xc0008000 - 0xc07de244   (8025 kB)
+      .init : 0xc07df000 - 0xc0821240   ( 265 kB)
+      .data : 0xc0822000 - 0xc0874a40   ( 331 kB)
+       .bss : 0xc0874a4c - 0xc08cdfbc   ( 358 kB)
 Preemptible hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
+L2C: platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C: DT/platform modifies aux control register: 0x02080000 -> 0x3e480001
+L2C-310 erratum 769419 enabled
+L2C-310 enabling early BRESP for Cortex-A9
+L2C-310: enabling full line of zeros but not enabled in Cortex-A9
+L2C-310 ID prefetch enabled, offset 1 lines
+L2C-310 dynamic clock gating enabled, standby mode enabled
+L2C-310 cache controller enabled, 8 ways, 1024 kB
+L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x7e480001
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
 Console: colour dummy device 80x30
-Calibrating delay loop... 2786.91 BogoMIPS (lpj=13934592)
+Calibrating delay loop... 2793.47 BogoMIPS (lpj=13967360)
 pid_max: default: 32768 minimum: 301
 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
-Initializing cgroup subsys debug
 Initializing cgroup subsys freezer
+Initializing cgroup subsys debug
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x8059ccf0 - 0x8059cd88
+Setting up static identity map for 0x805b7418 - 0x805b74b0
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: Booted secondary processor
@@ -133,21 +140,25 @@
 hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
 hw-breakpoint: maximum watchpoint size is 4 bytes.
 vdd_5v_in: 5000 mV 
-platform 1.regulator: Driver reg-fixed-voltage requests probe deferral
-platform 2.regulator: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@1: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@2: Driver reg-fixed-voltage requests probe deferral
 vdd_5v_sata: Failed to request enable GPIO30: -517
-reg-fixed-voltage 3.regulator: Failed to register regulator: -517
-platform 3.regulator: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@3: Failed to register regulator: -517
+platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
 usb1_vbus: Failed to request enable GPIO238: -517
-reg-fixed-voltage 4.regulator: Failed to register regulator: -517
-platform 4.regulator: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
+platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
 usb3_vbus: Failed to request enable GPIO236: -517
-reg-fixed-voltage 5.regulator: Failed to register regulator: -517
-platform 5.regulator: Driver reg-fixed-voltage requests probe deferral
-platform 6.regulator: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@5: Failed to register regulator: -517
+platform regulators:regulator@5: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@6: Driver reg-fixed-voltage requests probe deferral
 sys_3v3_pexs: Failed to request enable GPIO95: -517
-reg-fixed-voltage 7.regulator: Failed to register regulator: -517
-platform 7.regulator: Driver reg-fixed-voltage requests probe deferral
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
+platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
++VDD_5V_HDMI: 5000 mV 
+reg-fixed-voltage regulators:regulator@8: Failed to find supply vin
+reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
+platform regulators:regulator@8: Driver reg-fixed-voltage requests probe deferral
 vgaarb: loaded
 SCSI subsystem initialized
 usbcore: registered new interface driver usbfs
@@ -201,9 +212,9 @@
 PCI: CLS 0 bytes, default 64
 hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
 futex hash table entries: 1024 (order: 4, 65536 bytes)
-bounce pool size: 64 pages
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 msgmni has been set to 1468
+bounce: pool size: 64 pages
 io scheduler noop registered (default)
 platform 3000.pcie-controller: Driver tegra-pcie requests probe deferral
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
@@ -212,10 +223,11 @@
 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 68, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
 [drm] Initialized drm 1.1.0 20060810
-tegra-hdmi 54280000.hdmi: failed to get VDD regulator
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
 platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
 loop: module loaded
 m25p80 spi32766.1: w25q32 (4096 Kbytes)
+CAN device driver interface
 pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
 usbcore: registered new interface driver pegasus
 usbcore: registered new interface driver asix
@@ -270,14 +282,19 @@
  mmcblk0boot1: unknown partition table
  mmcblk0boot0: unknown partition table
 tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
-tegra-snd-rt5640 sound.4: rt5640-aif1 <-> 70080400.i2s mapping ok
-input: NVIDIA Tegra Beaver Headphones as /devices/soc0/sound.4/sound/card0/input0
+tegra-snd-rt5640 sound: rt5640-aif1 <-> 70080400.i2s mapping ok
+input: NVIDIA Tegra Beaver Headphones as /devices/soc0/sound/sound/card0/input0
 TCP: cubic registered
 NET: Registered protocol family 10
 mip6: Mobile IPv6
 sit: IPv6 over IPv4 tunneling driver
 NET: Registered protocol family 17
 NET: Registered protocol family 15
+can: controller area network core (rev 20120528 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20120528)
+can: broadcast manager protocol (rev 20120528 t)
+can: netlink gateway (rev 20130117) max_hops=1
 Bluetooth: RFCOMM socket layer initialized
 Bluetooth: RFCOMM ver 1.11
 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
@@ -285,7 +302,6 @@
 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
 Bluetooth: HIDP socket layer initialized
 Registering SWP/SWPB emulation handler
-vdd_sata,avdd_plle: disabling
 chargepump_5v: 5000 mV 
 vdd_ddr: 1500 mV 
 vdd_ddr: supplied by vdd_5v_in
@@ -299,6 +315,8 @@
 sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
 sys_3v3_pexs: 3300 mV 
 sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
++VDD_5V_HDMI: 5000 mV 
++VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw
 tegra-pcie 3000.pcie-controller: 2x3 configuration
 tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
 tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
@@ -362,6 +380,7 @@
 hub 2-0:1.0: USB hub found
 hub 2-0:1.0: 1 port detected
 tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
+usb1_vbus: disabling
 ALSA device list:
   #0: NVIDIA Tegra Beaver
 kjournald starting.  Commit interval 5 seconds
@@ -371,8 +390,8 @@
 EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 260K (c07be000 - c07ff000)
-usb 2-1: new high-speed USB device number 2 using tegra-ehci
+Freeing unused kernel memory: 264K (c07df000 - c0821000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.938908] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:68:6d
+root@(none):/# [    4.637031] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:68:6d
