Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2014-08-04 00:55:21.694962278 -0700
+++ /tmp/foob	2014-08-04 00:55:21.698962278 -0700
@@ -37,20 +37,20 @@
 	 #################################################################
 	 #################################################################
 	 ############
-	 3.2 MiB/s
+	 3.1 MiB/s
 done
-Bytes transferred = 4934520 (4b4b78 hex)
+Bytes transferred = 4938008 (4b5918 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3 MiB/s
+	 2.5 MiB/s
 done
 Bytes transferred = 34244 (85c4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x4b4b78 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x4b5918 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK
@@ -58,7 +58,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 3.16.0-rc7-79660-g64aa90f (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jul 27 13:03:39 PDT 2014
+Linux version 3.16.0-79775-g19583ca (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Aug 4 00:46:30 PDT 2014
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
@@ -81,7 +81,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2002152K/2096128K available (6362K kernel code, 894K rwdata, 2568K rodata, 652K init, 304K bss, 93976K reserved, 1317888K highmem)
+Memory: 2002152K/2096128K available (6366K kernel code, 894K rwdata, 2568K rodata, 652K init, 304K bss, 93976K reserved, 1317888K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
@@ -89,8 +89,8 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0ac0a88   (8931 kB)
-      .init : 0xc0ac1000 - 0xc0b64100   ( 653 kB)
+      .text : 0xc0208000 - 0xc0ac1b54   (8935 kB)
+      .init : 0xc0ac2000 - 0xc0b65100   ( 653 kB)
       .data : 0xc0b66000 - 0xc0c45800   ( 894 kB)
        .bss : 0xc0c45808 - 0xc0c91898   ( 305 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
@@ -114,7 +114,7 @@
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x80802720 - 0x808027b8
+Setting up static identity map for 0x808036d0 - 0x80803768
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: Booted secondary processor
@@ -378,7 +378,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-02 15:18:08 UTC (946826288)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-10 03:01:10 UTC (947473270)
 vdd_cam_1v8_reg: disabling
 vdd_hdmi_5v0: disabling
 usb1_vbus: disabling
@@ -390,7 +390,7 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 652K (c0ac1000 - c0b64000)
+Freeing unused kernel memory: 652K (c0ac2000 - c0b65000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    2.847726] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    2.842711] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2014-08-04 00:55:21.706962276 -0700
+++ /tmp/foob	2014-08-04 00:55:21.710962274 -0700
@@ -36,20 +36,20 @@
 	 #################################################################
 	 #################################################################
 	 ##########################################
-	 3.5 MiB/s
+	 2.8 MiB/s
 done
-Bytes transferred = 4420152 (437238 hex)
+Bytes transferred = 4423800 (438078 hex)
 Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.100
 Filename 'tegra114-dalmore.dtb'.
 Load address: 0x82000000
 Loading: *###
-	 3.3 MiB/s
+	 2.5 MiB/s
 done
 Bytes transferred = 34244 (85c4 hex)
 Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x437238 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x438078 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff4000, end 8ffff5c3 ... OK
@@ -60,7 +60,7 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 3.16.0-rc7-79660-g64aa90f (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jul 27 13:04:47 PDT 2014
+Linux version 3.16.0-79775-g19583ca (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Aug 4 00:46:04 PDT 2014
 CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 Machine model: NVIDIA Tegra114 Dalmore evaluation board
@@ -83,7 +83,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2003948K/2096128K available (6035K kernel code, 330K rwdata, 1992K rodata, 264K init, 357K bss, 92180K reserved, 1317888K highmem)
+Memory: 2003948K/2096128K available (6039K kernel code, 330K rwdata, 1992K rodata, 264K init, 357K bss, 92180K reserved, 1317888K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
@@ -91,8 +91,8 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc07df288   (8029 kB)
-      .init : 0xc07e0000 - 0xc0822240   ( 265 kB)
+      .text : 0xc0008000 - 0xc07e034c   (8033 kB)
+      .init : 0xc07e1000 - 0xc0823240   ( 265 kB)
       .data : 0xc0824000 - 0xc0876a80   ( 331 kB)
        .bss : 0xc0876a8c - 0xc08cfffc   ( 358 kB)
 Preemptible hierarchical RCU implementation.
@@ -115,7 +115,7 @@
 /cpus/cpu@2 missing clock-frequency property
 /cpus/cpu@3 missing clock-frequency property
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x805b8c48 - 0x805b8ce0
+Setting up static identity map for 0x805b9bd0 - 0x805b9c68
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: Booted secondary processor
@@ -368,7 +368,7 @@
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
 input: gpio-keys as /devices/soc0/gpio-keys/input/input1
-palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-02 15:19:06 UTC (946826346)
+palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-10 03:00:43 UTC (947473243)
 vdd_cam_1v8_reg: disabling
 vdd_hdmi_5v0: disabling
 usb1_vbus: disabling
@@ -381,7 +381,7 @@
 EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 264K (c07e0000 - c0822000)
+Freeing unused kernel memory: 264K (c07e1000 - c0823000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    3.010640] usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    3.010603] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/multi_v7_defconfig_log.txt
--- /tmp/fooa	1969-12-31 16:00:00.000000000 -0800
+++ /tmp/foob	2014-08-04 00:55:21.718962276 -0700
@@ -0,0 +1,414 @@
+
+U-Boot SPL 2014.07-00097-g772e173 (Jul 25 2014 - 20:02:52)
+
+
+U-Boot 2014.07-00097-g772e173 (Jul 25 2014 - 20:02:52)
+
+TEGRA124
+Board: NVIDIA Jetson TK1
+I2C:   ready
+DRAM:  2 GiB
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+In:    serial
+Out:   serial
+Err:   serial
+Net:   Net Initialization Skipped
+No ethernet found.
+Hit any key to stop autoboot:  2  0 
+Tegra124 (Jetson TK1) # 
+Tegra124 (Jetson TK1) # usb reset
+(Re)start USB...
+USB0:   USB EHCI 1.10
+scanning bus 0 for devices... 1 USB Device(s) found
+USB1:   USB EHCI 1.10
+scanning bus 1 for devices... 2 USB Device(s) found
+       scanning usb for storage devices... 0 Storage Device(s) found
+       scanning usb for ethernet devices... 
+Warning: asx0 using MAC address from net device
+1 Ethernet Device(s) found
+Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd'
+Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra124 (Jetson TK1) # tftpboot 0x81000000 zImage.multi_v7_defconfig
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+Filename 'zImage.multi_v7_defconfig'.
+Load address: 0x81000000
+Loading: *#################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 ############
+	 2.8 MiB/s
+done
+Bytes transferred = 4938008 (4b5918 hex)
+Tegra124 (Jetson TK1) # tftpboot 0x82000000 tegra124-jetson-tk1.dtb
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+Filename 'tegra124-jetson-tk1.dtb'.
+Load address: 0x82000000
+Loading: *###
+	 2.7 MiB/s
+done
+Bytes transferred = 42784 (a720 hex)
+Tegra124 (Jetson TK1) # bootz 0x81000000 - 0x82000000
+Kernel image @ 0x81000000 [ 0x000000 - 0x4b5918 ]
+## Flattened Device Tree blob at 82000000
+   Booting using the fdt blob at 0x82000000
+   Using Device Tree in place at 82000000, end 8200d71f
+
+Starting kernel ...
+
+Booting Linux on physical CPU 0x0
+Linux version 3.16.0-79775-g19583ca (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Aug 4 00:46:30 PDT 2014
+CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
+CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
+Machine model: NVIDIA Tegra124 Jetson TK1
+debug: ignoring loglevel setting.
+cma: CMA: reserved 64 MiB at ab800000
+Memory policy: Data cache writealloc
+On node 0 totalpages: 524032
+free_area_init_node: node 0, pgdat c0c43b00, node_mem_map ea7d8000
+  DMA zone: 1520 pages used for memmap
+  DMA zone: 0 pages reserved
+  DMA zone: 194560 pages, LIFO batch:31
+  HighMem zone: 2574 pages used for memmap
+  HighMem zone: 329472 pages, LIFO batch:31
+Tegra: unknown chip id 64
+Tegra Revision: A01 SKU: 129 CPU Process: 0 Core Process: 0
+PERCPU: Embedded 8 pages/cpu @ea78a000 s8448 r8192 d16128 u32768
+pcpu-alloc: s8448 r8192 d16128 u32768 alloc=8*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
+PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 2002108K/2096128K available (6366K kernel code, 894K rwdata, 2568K rodata, 652K init, 304K bss, 94020K reserved, 1317888K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
+    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0208000 - 0xc0ac1b54   (8935 kB)
+      .init : 0xc0ac2000 - 0xc0b65100   ( 653 kB)
+      .data : 0xc0b66000 - 0xc0c45800   ( 894 kB)
+       .bss : 0xc0c45808 - 0xc0c91898   ( 305 kB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+Hierarchical RCU implementation.
+	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
+RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+NR_IRQS:16 nr_irqs:16 16
+L2C: failed to init: -19
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+Architected cp15 timer(s) running at 12.00MHz (virt).
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
+Switching to timer-based delay loop
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=60000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+CPU: Testing write buffer coherency: ok
+/cpus/cpu@0 missing clock-frequency property
+/cpus/cpu@1 missing clock-frequency property
+/cpus/cpu@2 missing clock-frequency property
+/cpus/cpu@3 missing clock-frequency property
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x808036d0 - 0x80803768
+CPU1: Booted secondary processor
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: Booted secondary processor
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: Booted secondary processor
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+Brought up 4 CPUs
+SMP: Total of 4 processors activated.
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+pinctrl core: initialized pinctrl subsystem
+regulator-dummy: no parameters
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor ladder
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 8 bytes.
+EXYNOS: PMU not supported
+Serial: AMBA PL011 UART driver
+edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
+edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
++VDD_MUX: 12000 mV 
++5V_SYS: 5000 mV 
++5V_SYS: supplied by +VDD_MUX
++3.3V_SYS: 3300 mV 
++3.3V_SYS: supplied by +VDD_MUX
+platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
++3.3V_AVDD_HDMI_AP_GATED: 3300 mV 
+reg-fixed-voltage regulators:regulator@4: Failed to find supply vin
+reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
+platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
++USB0_VBUS_SW: Failed to request enable GPIO108: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
+platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
++5V_USB_HS: Failed to request enable GPIO109: -517
+reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
+platform regulators:regulator@8: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@10: Driver reg-fixed-voltage requests probe deferral
++1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517
+reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
+platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral
++5V_HDMI_CON: Failed to request enable GPIO86: -517
+reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517
+platform regulators:regulator@12: Driver reg-fixed-voltage requests probe deferral
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+Linux video capture interface: v2.00
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+EDAC MC: Ver: 3.0.0
+Advanced Linux Sound Architecture Driver Initialized.
+Switched to clocksource arch_sys_counter
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+TCP: reno registered
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+msgmni has been set to 1464
+bounce: pool size: 64 pages
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
+io scheduler noop registered
+io scheduler deadline registered
+io scheduler cfq registered (default)
+tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+Serial: IMX driver
+msm_serial: driver initialized
+console [ttyS0] disabled
+70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+STMicroelectronics ASC driver initialized
+serial: Freescale lpuart driver
+[drm] Initialized drm 1.1.0 20060810
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+loop: module loaded
+at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
+as3722 4-0040: AS3722 with revision 0x1 found
++VDD_CPU_AP: 700 <--> 1400 mV at 1000 mV 3500 mA 
++VDD_CORE: 700 <--> 1350 mV at 1100 mV 2500 mA 
++1.35V_LP0(sd2): 1350 mV 
++1.35V_LP0(sd2): supplied by +5V_SYS
++1.35V_LP0(sd3): 1350 mV 
++1.35V_LP0(sd3): supplied by +5V_SYS
++1.05V_RUN: 1050 mV 
++1.05V_RUN: supplied by +5V_SYS
++1.8V_VDDIO: 1800 mV 
++1.8V_VDDIO: supplied by +5V_SYS
++VDD_GPU_AP: 650 <--> 1200 mV at 1000 mV 3500 mA 
++1.05V_RUN_AVDD: 1050 mV at 300 mA 
++1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
++1.8V_RUN_CAM: 1800 mV at 150 mA 
+as3722-regulator as3722-regulator: Failed to find supply vin-ldo1-6
+as3722-regulator as3722-regulator: regulator 8 register failed -517
+platform as3722-regulator: Driver as3722-regulator requests probe deferral
+CAN device driver interface
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-omap: OMAP-EHCI Host Controller driver
+ehci-orion: EHCI orion driver
+SPEAr-ehci: EHCI SPEAr driver
+tegra-ehci: Tegra EHCI driver
+platform 7d004000.usb: Driver tegra-ehci requests probe deferral
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+ohci-pci: OHCI PCI platform driver
+ohci-platform: OHCI generic platform driver
+ohci-omap3: OHCI OMAP3 driver
+SPEAr-ohci: OHCI SPEAr driver
+usbcore: registered new interface driver usb-storage
+tegra-phy 7d004000.usb-phy: no vbus regulator
+platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
+mousedev: PS/2 mouse device common for all mice
+as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
+as3722-rtc as3722-rtc: RTC interrupt 464
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+usbcore: registered new interface driver uvcvideo
+USB Video Class driver (1.1.1)
+gspca_main: v2.14.0 registered
+0-004c supply vcc not found, using dummy regulator
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+Synopsys Designware Multimedia Card Interface Driver
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 700b0400.sdhci: Got CD GPIO #170.
+sdhci-tegra 700b0400.sdhci: Got WP GPIO #132.
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: no vqmmc regulator found
+mmc0: no vmmc regulator found
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+mmc1: Unknown controller version (3). You may experience problems.
+mmc1: no vqmmc regulator found
+mmc1: no vmmc regulator found
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+mmc1: BKOPS_EN bit is not set
+mmc1: new high speed MMC card at address 0001
+mmcblk0: mmc1:0001 SEM16G 14.6 GiB 
+mmcblk0boot0: mmc1:0001 SEM16G partition 1 4.00 MiB
+mmcblk0boot1: mmc1:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc1:0001 SEM16G partition 3 4.00 MiB
+Primary GPT is invalid, using alternate GPT.
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
+ mmcblk0boot1: unknown partition table
+ mmcblk0boot0: unknown partition table
+tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
+tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok
+input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card0/input0
+TCP: cubic registered
+NET: Registered protocol family 17
+can: controller area network core (rev 20120528 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20120528)
+can: broadcast manager protocol (rev 20120528 t)
+can: netlink gateway (rev 20130117) max_hops=1
+Key type dns_resolver registered
+ThumbEE CPU extension supported.
+Registering SWP/SWPB emulation handler
++3.3V_RUN: 3300 mV 
++3.3V_RUN: supplied by +3.3V_SYS
++3.3V_AVDD_HDMI_AP_GATED: 3300 mV 
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
++USB0_VBUS_SW: 5000 mV 
++USB0_VBUS_SW: supplied by +5V_SYS
++5V_USB_HS: 5000 mV 
++5V_USB_HS: supplied by +5V_SYS
++3.3V_LP0: 3300 mV 
++3.3V_LP0: supplied by +3.3V_SYS
++1.05V_RUN_AVDD_HDMI_PLL: 1050 mV 
+reg-fixed-voltage regulators:regulator@11: Failed to find supply vin
+reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
+platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral
++5V_HDMI_CON: 5000 mV 
++5V_HDMI_CON: supplied by +5V_SYS
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
++VDD_CPU_AP: 700 <--> 1400 mV at 1000 mV 3500 mA 
++VDD_CORE: 700 <--> 1350 mV at 1100 mV 2500 mA 
++1.35V_LP0(sd2): 1350 mV 
++1.35V_LP0(sd2): supplied by +5V_SYS
++1.35V_LP0(sd3): 1350 mV 
++1.35V_LP0(sd3): supplied by +5V_SYS
++1.05V_RUN: 1050 mV 
++1.05V_RUN: supplied by +5V_SYS
++1.8V_VDDIO: 1800 mV 
++1.8V_VDDIO: supplied by +5V_SYS
++VDD_GPU_AP: 650 <--> 1200 mV at 1000 mV 3500 mA 
++1.05V_RUN_AVDD: 1050 mV at 300 mA 
++1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
++1.8V_RUN_CAM: 1800 mV at 150 mA 
++1.8V_RUN_CAM: supplied by +3.3V_RUN
++1.2V_GEN_AVDD: 1200 mV at 150 mA 
++1.2V_GEN_AVDD: supplied by +1.8V_VDDIO
++1.05V_LP0_VDD_RTC: 1000 mV at 150 mA 
++2.8V_RUN_CAM: 2800 mV at 150 mA 
++1.2V_RUN_CAM_FRONT: 1200 mV at 150 mA 
++1.2V_RUN_CAM_FRONT: supplied by +1.8V_VDDIO
++VDDIO_SDMMC3: 1800 <--> 3300 mV at 150 mA 
++VDDIO_SDMMC3: supplied by +3.3V_RUN
++1.05V_RUN_CAM_REAR: 1050 mV at 150 mA 
++1.05V_RUN_CAM_REAR: supplied by +1.8V_VDDIO
++3.3V_RUN_TOUCH: 2800 mV at 150 mA 
++3.3V_RUN_TOUCH: supplied by +5V_SYS
++2.8V_RUN_CAM_AF: 2800 mV at 150 mA 
++2.8V_RUN_CAM_AF: supplied by +5V_SYS
++1.8V_RUN_VPP_FUSE: 1800 mV at 150 mA 
++1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
+tegra-ehci 7d004000.usb: EHCI Host Controller
+tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000
+tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
++1.05V_RUN_AVDD_HDMI_PLL: 1050 mV 
++1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+host1x drm: No connectors reported connected with modes
+[drm] Cannot find any crtc or sizes - going 1024x768
+Console: switching to colour frame buffer device 128x48
+host1x drm: fb0:  frame buffer device
+host1x drm: registered panic notifier
+[drm] Initialized tegra 0.0.0 20120330 on minor 0
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+input: gpio-keys as /devices/soc0/gpio-keys/input/input1
+as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:47 UTC (949363247)
++1.05V_RUN_AVDD_HDMI_PLL: disabling
++1.8V_RUN_VPP_FUSE: disabling
++2.8V_RUN_CAM_AF: disabling
++3.3V_RUN_TOUCH: disabling
++1.05V_RUN_CAM_REAR: disabling
++VDDIO_SDMMC3: disabling
++1.2V_RUN_CAM_FRONT: disabling
++2.8V_RUN_CAM: disabling
++1.8V_RUN_CAM: disabling
++1.05V_RUN: disabling
++USB0_VBUS_SW: disabling
++3.3V_AVDD_HDMI_AP_GATED: disabling
+ALSA device list:
+  #0: NVIDIA Tegra Jetson TK1
+EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
+EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
+EXT4-fs (mmcblk0p1): recovery complete
+EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 652K (c0ac2000 - c0b65000)
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    2.862087] usb 2-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra124-jetson-tk1/tegra124-jetson-tk1/tegra_defconfig_log.txt
--- /tmp/fooa	1969-12-31 16:00:00.000000000 -0800
+++ /tmp/foob	2014-08-04 00:55:21.722962277 -0700
@@ -0,0 +1,405 @@
+
+U-Boot SPL 2014.07-00097-g772e173 (Jul 25 2014 - 20:02:52)
+
+
+U-Boot 2014.07-00097-g772e173 (Jul 25 2014 - 20:02:52)
+
+TEGRA124
+Board: NVIDIA Jetson TK1
+I2C:   ready
+DRAM:  2 GiB
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+In:    serial
+Out:   serial
+Err:   serial
+Net:   Net Initialization Skipped
+No ethernet found.
+Hit any key to stop autoboot:  2  0 
+Tegra124 (Jetson TK1) # 
+Tegra124 (Jetson TK1) # usb reset
+(Re)start USB...
+USB0:   USB EHCI 1.10
+scanning bus 0 for devices... 1 USB Device(s) found
+USB1:   USB EHCI 1.10
+scanning bus 1 for devices... 2 USB Device(s) found
+       scanning usb for storage devices... 0 Storage Device(s) found
+       scanning usb for ethernet devices... 
+Warning: asx0 using MAC address from net device
+1 Ethernet Device(s) found
+Tegra124 (Jetson TK1) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd'
+Tegra124 (Jetson TK1) # setenv ipaddr 192.168.100.102; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra124 (Jetson TK1) # tftpboot 0x81000000 zImage.tegra_defconfig
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+Filename 'zImage.tegra_defconfig'.
+Load address: 0x81000000
+Loading: *#################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 ##########################################
+	 2.8 MiB/s
+done
+Bytes transferred = 4423800 (438078 hex)
+Tegra124 (Jetson TK1) # tftpboot 0x82000000 tegra124-jetson-tk1.dtb
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.102
+Filename 'tegra124-jetson-tk1.dtb'.
+Load address: 0x82000000
+Loading: *###
+	 2.9 MiB/s
+done
+Bytes transferred = 42784 (a720 hex)
+Tegra124 (Jetson TK1) # bootz 0x81000000 - 0x82000000
+Kernel image @ 0x81000000 [ 0x000000 - 0x438078 ]
+## Flattened Device Tree blob at 82000000
+   Booting using the fdt blob at 0x82000000
+   Using Device Tree in place at 82000000, end 8200d71f
+
+Starting kernel ...
+
+Uncompressing Linux... done, booting the kernel.
+Booting Linux on physical CPU 0x0
+Initializing cgroup subsys cpu
+Initializing cgroup subsys cpuacct
+Linux version 3.16.0-79775-g19583ca (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Aug 4 00:46:04 PDT 2014
+CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=10c5387d
+CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
+Machine model: NVIDIA Tegra124 Jetson TK1
+debug: ignoring loglevel setting.
+cma: CMA: reserved 64 MiB at ab800000
+Memory policy: Data cache writealloc
+On node 0 totalpages: 524032
+free_area_init_node: node 0, pgdat c0875140, node_mem_map ea7d7000
+  Normal zone: 1520 pages used for memmap
+  Normal zone: 0 pages reserved
+  Normal zone: 194560 pages, LIFO batch:31
+  HighMem zone: 2574 pages used for memmap
+  HighMem zone: 329472 pages, LIFO batch:31
+Tegra: unknown chip id 64
+Tegra Revision: A01 SKU: 129 CPU Process: 0 Core Process: 0
+PERCPU: Embedded 8 pages/cpu @ea789000 s8768 r8192 d15808 u32768
+pcpu-alloc: s8768 r8192 d15808 u32768 alloc=8*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
+PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 2003904K/2096128K available (6039K kernel code, 330K rwdata, 1992K rodata, 264K init, 357K bss, 92224K reserved, 1317888K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
+    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0008000 - 0xc07e034c   (8033 kB)
+      .init : 0xc07e1000 - 0xc0823240   ( 265 kB)
+      .data : 0xc0824000 - 0xc0876a80   ( 331 kB)
+       .bss : 0xc0876a8c - 0xc08cfffc   ( 358 kB)
+Preemptible hierarchical RCU implementation.
+NR_IRQS:16 nr_irqs:16 16
+L2C: failed to init: -19
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+Architected cp15 timer(s) running at 12.00MHz (virt).
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
+Switching to timer-based delay loop
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
+Initializing cgroup subsys freezer
+Initializing cgroup subsys debug
+CPU: Testing write buffer coherency: ok
+/cpus/cpu@0 missing clock-frequency property
+/cpus/cpu@1 missing clock-frequency property
+/cpus/cpu@2 missing clock-frequency property
+/cpus/cpu@3 missing clock-frequency property
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x805b9bd0 - 0x805b9c68
+CPU1: Booted secondary processor
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: Booted secondary processor
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: Booted secondary processor
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+Brought up 4 CPUs
+SMP: Total of 4 processors activated.
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+pinctrl core: initialized pinctrl subsystem
+regulator-dummy: no parameters
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor ladder
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 8 bytes.
++VDD_MUX: 12000 mV 
++5V_SYS: 5000 mV 
++5V_SYS: supplied by +VDD_MUX
++3.3V_SYS: 3300 mV 
++3.3V_SYS: supplied by +VDD_MUX
+platform regulators:regulator@3: Driver reg-fixed-voltage requests probe deferral
++3.3V_AVDD_HDMI_AP_GATED: 3300 mV 
+reg-fixed-voltage regulators:regulator@4: Failed to find supply vin
+reg-fixed-voltage regulators:regulator@4: Failed to register regulator: -517
+platform regulators:regulator@4: Driver reg-fixed-voltage requests probe deferral
++USB0_VBUS_SW: Failed to request enable GPIO108: -517
+reg-fixed-voltage regulators:regulator@7: Failed to register regulator: -517
+platform regulators:regulator@7: Driver reg-fixed-voltage requests probe deferral
++5V_USB_HS: Failed to request enable GPIO109: -517
+reg-fixed-voltage regulators:regulator@8: Failed to register regulator: -517
+platform regulators:regulator@8: Driver reg-fixed-voltage requests probe deferral
+platform regulators:regulator@10: Driver reg-fixed-voltage requests probe deferral
++1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517
+reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
+platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral
++5V_HDMI_CON: Failed to request enable GPIO86: -517
+reg-fixed-voltage regulators:regulator@12: Failed to register regulator: -517
+platform regulators:regulator@12: Driver reg-fixed-voltage requests probe deferral
+vgaarb: loaded
+SCSI subsystem initialized
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+Linux video capture interface: v2.00
+Advanced Linux Sound Architecture Driver Initialized.
+Bluetooth: Core ver 2.19
+NET: Registered protocol family 31
+Bluetooth: HCI device and connection manager initialized
+Bluetooth: HCI socket layer initialized
+Bluetooth: L2CAP socket layer initialized
+Bluetooth: SCO socket layer initialized
+cfg80211: Calling CRDA to update world regulatory domain
+Switched to clocksource arch_sys_counter
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+TCP: reno registered
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+msgmni has been set to 1467
+bounce: pool size: 64 pages
+io scheduler noop registered (default)
+tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+console [ttyS0] disabled
+70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+[drm] Initialized drm 1.1.0 20060810
+tegra-hdmi 54280000.hdmi: failed to get HDMI regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+loop: module loaded
+at24 0-0056: 256 byte 24c02 EEPROM, writable, 8 bytes/write
+as3722 4-0040: AS3722 with revision 0x1 found
++VDD_CPU_AP: 700 <--> 1400 mV at 1000 mV 3500 mA 
++VDD_CORE: 700 <--> 1350 mV at 1100 mV 2500 mA 
++1.35V_LP0(sd2): 1350 mV 
++1.35V_LP0(sd2): supplied by +5V_SYS
++1.35V_LP0(sd3): 1350 mV 
++1.35V_LP0(sd3): supplied by +5V_SYS
++1.05V_RUN: 1050 mV 
++1.05V_RUN: supplied by +5V_SYS
++1.8V_VDDIO: 1800 mV 
++1.8V_VDDIO: supplied by +5V_SYS
++VDD_GPU_AP: 650 <--> 1200 mV at 1000 mV 3500 mA 
++1.05V_RUN_AVDD: 1050 mV at 300 mA 
++1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
++1.8V_RUN_CAM: 1800 mV at 150 mA 
+as3722-regulator as3722-regulator: Failed to find supply vin-ldo1-6
+as3722-regulator as3722-regulator: regulator 8 register failed -517
+platform as3722-regulator: Driver as3722-regulator requests probe deferral
+m25p80 spi32765.0: w25q32dw (4096 Kbytes)
+CAN device driver interface
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+tegra-ehci: Tegra EHCI driver
+platform 7d004000.usb: Driver tegra-ehci requests probe deferral
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+usbcore: registered new interface driver cdc_acm
+cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
+usbcore: registered new interface driver cdc_wdm
+usbcore: registered new interface driver usb-storage
+tegra-phy 7d004000.usb-phy: no vbus regulator
+platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
+mousedev: PS/2 mouse device common for all mice
+as3722-rtc as3722-rtc: rtc core: registered as3722-rtc as rtc0
+as3722-rtc as3722-rtc: RTC interrupt 464
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+usbcore: registered new interface driver uvcvideo
+USB Video Class driver (1.1.1)
+gspca_main: v2.14.0 registered
+0-004c supply vcc not found, using dummy regulator
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 700b0400.sdhci: Got CD GPIO #170.
+sdhci-tegra 700b0400.sdhci: Got WP GPIO #132.
+mmc0: Unknown controller version (3). You may experience problems.
+mmc0: no vqmmc regulator found
+mmc0: no vmmc regulator found
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 700b0400.sdhci [700b0400.sdhci] using ADMA
+mmc1: Unknown controller version (3). You may experience problems.
+mmc1: no vqmmc regulator found
+mmc1: no vmmc regulator found
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 700b0600.sdhci [700b0600.sdhci] using ADMA
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+mmc1: BKOPS_EN bit is not set
+mmc1: new high speed MMC card at address 0001
+mmcblk0: mmc1:0001 SEM16G 14.6 GiB 
+mmcblk0boot0: mmc1:0001 SEM16G partition 1 4.00 MiB
+mmcblk0boot1: mmc1:0001 SEM16G partition 2 4.00 MiB
+mmcblk0rpmb: mmc1:0001 SEM16G partition 3 4.00 MiB
+Primary GPT is invalid, using alternate GPT.
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
+ mmcblk0boot1: unknown partition table
+ mmcblk0boot0: unknown partition table
+tegra30-i2s 70301100.i2s: DMA channels sourced from device 70300000.ahub
+tegra-snd-rt5640 sound: rt5640-aif1 <-> 70301100.i2s mapping ok
+input: NVIDIA Tegra Jetson TK1 Headphones as /devices/soc0/sound/sound/card0/input0
+TCP: cubic registered
+NET: Registered protocol family 10
+mip6: Mobile IPv6
+sit: IPv6 over IPv4 tunneling driver
+NET: Registered protocol family 17
+NET: Registered protocol family 15
+can: controller area network core (rev 20120528 abi 9)
+NET: Registered protocol family 29
+can: raw protocol (rev 20120528)
+can: broadcast manager protocol (rev 20120528 t)
+can: netlink gateway (rev 20130117) max_hops=1
+Bluetooth: RFCOMM socket layer initialized
+Bluetooth: RFCOMM ver 1.11
+Bluetooth: BNEP (Ethernet Emulation) ver 1.3
+Bluetooth: BNEP socket layer initialized
+Bluetooth: HIDP (Human Interface Emulation) ver 1.2
+Bluetooth: HIDP socket layer initialized
+Registering SWP/SWPB emulation handler
++3.3V_RUN: 3300 mV 
++3.3V_RUN: supplied by +3.3V_SYS
++3.3V_AVDD_HDMI_AP_GATED: 3300 mV 
++3.3V_AVDD_HDMI_AP_GATED: supplied by +3.3V_RUN
++USB0_VBUS_SW: 5000 mV 
++USB0_VBUS_SW: supplied by +5V_SYS
++5V_USB_HS: 5000 mV 
++5V_USB_HS: supplied by +5V_SYS
++3.3V_LP0: 3300 mV 
++3.3V_LP0: supplied by +3.3V_SYS
++1.05V_RUN_AVDD_HDMI_PLL: 1050 mV 
+reg-fixed-voltage regulators:regulator@11: Failed to find supply vin
+reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517
+platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral
++5V_HDMI_CON: 5000 mV 
++5V_HDMI_CON: supplied by +5V_SYS
+tegra-hdmi 54280000.hdmi: failed to get PLL regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
++VDD_CPU_AP: 700 <--> 1400 mV at 1000 mV 3500 mA 
++VDD_CORE: 700 <--> 1350 mV at 1100 mV 2500 mA 
++1.35V_LP0(sd2): 1350 mV 
++1.35V_LP0(sd2): supplied by +5V_SYS
++1.35V_LP0(sd3): 1350 mV 
++1.35V_LP0(sd3): supplied by +5V_SYS
++1.05V_RUN: 1050 mV 
++1.05V_RUN: supplied by +5V_SYS
++1.8V_VDDIO: 1800 mV 
++1.8V_VDDIO: supplied by +5V_SYS
++VDD_GPU_AP: 650 <--> 1200 mV at 1000 mV 3500 mA 
++1.05V_RUN_AVDD: 1050 mV at 300 mA 
++1.05V_RUN_AVDD: supplied by +1.35V_LP0(sd2)
++1.8V_RUN_CAM: 1800 mV at 150 mA 
++1.8V_RUN_CAM: supplied by +3.3V_RUN
++1.2V_GEN_AVDD: 1200 mV at 150 mA 
++1.2V_GEN_AVDD: supplied by +1.8V_VDDIO
++1.05V_LP0_VDD_RTC: 1000 mV at 150 mA 
++2.8V_RUN_CAM: 2800 mV at 150 mA 
++1.2V_RUN_CAM_FRONT: 1200 mV at 150 mA 
++1.2V_RUN_CAM_FRONT: supplied by +1.8V_VDDIO
++VDDIO_SDMMC3: 1800 <--> 3300 mV at 150 mA 
++VDDIO_SDMMC3: supplied by +3.3V_RUN
++1.05V_RUN_CAM_REAR: 1050 mV at 150 mA 
++1.05V_RUN_CAM_REAR: supplied by +1.8V_VDDIO
++3.3V_RUN_TOUCH: 2800 mV at 150 mA 
++3.3V_RUN_TOUCH: supplied by +5V_SYS
++2.8V_RUN_CAM_AF: 2800 mV at 150 mA 
++2.8V_RUN_CAM_AF: supplied by +5V_SYS
++1.8V_RUN_VPP_FUSE: 1800 mV at 150 mA 
++1.8V_RUN_VPP_FUSE: supplied by +3.3V_RUN
+tegra-ehci 7d004000.usb: EHCI Host Controller
+tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000
+tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.10
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
++1.05V_RUN_AVDD_HDMI_PLL: 1050 mV 
++1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+host1x drm: No connectors reported connected with modes
+[drm] Cannot find any crtc or sizes - going 1024x768
+Console: switching to colour frame buffer device 128x48
+host1x drm: fb0:  frame buffer device
+host1x drm: registered panic notifier
+[drm] Initialized tegra 0.0.0 20120330 on minor 0
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+input: gpio-keys as /devices/soc0/gpio-keys/input/input1
+as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:15 UTC (949363215)
++1.05V_RUN_AVDD_HDMI_PLL: disabling
++1.8V_RUN_VPP_FUSE: disabling
++2.8V_RUN_CAM_AF: disabling
++3.3V_RUN_TOUCH: disabling
++1.05V_RUN_CAM_REAR: disabling
++VDDIO_SDMMC3: disabling
++1.2V_RUN_CAM_FRONT: disabling
++2.8V_RUN_CAM: disabling
++1.8V_RUN_CAM: disabling
++1.05V_RUN: disabling
++USB0_VBUS_SW: disabling
++3.3V_AVDD_HDMI_AP_GATED: disabling
+ALSA device list:
+  #0: NVIDIA Tegra Jetson TK1
+EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
+EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (244)
+EXT4-fs (mmcblk0p1): recovery complete
+EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext4 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 264K (c07e1000 - c0823000)
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2014-08-04 00:55:21.730962277 -0700
+++ /tmp/foob	2014-08-04 00:55:21.734962275 -0700
@@ -37,20 +37,20 @@
 	 #################################################################
 	 #################################################################
 	 ############
-	 3.6 MiB/s
+	 3 MiB/s
 done
-Bytes transferred = 4934520 (4b4b78 hex)
+Bytes transferred = 4938008 (4b5918 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *##
-	 2.9 MiB/s
+	 2.6 MiB/s
 done
 Bytes transferred = 24197 (5e85 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x4b4b78 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x4b5918 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff7000, end 8ffffe84 ... OK
@@ -58,7 +58,7 @@
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 3.16.0-rc7-79660-g64aa90f (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Sun Jul 27 13:03:39 PDT 2014
+Linux version 3.16.0-79775-g19583ca (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Mon Aug 4 00:46:30 PDT 2014
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -83,7 +83,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2002204K/2096128K available (6362K kernel code, 894K rwdata, 2568K rodata, 652K init, 304K bss, 93924K reserved, 1317888K highmem)
+Memory: 2002204K/2096128K available (6366K kernel code, 894K rwdata, 2568K rodata, 652K init, 304K bss, 93924K reserved, 1317888K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
@@ -91,8 +91,8 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0208000 - 0xc0ac0a88   (8931 kB)
-      .init : 0xc0ac1000 - 0xc0b64100   ( 653 kB)
+      .text : 0xc0208000 - 0xc0ac1b54   (8935 kB)
+      .init : 0xc0ac2000 - 0xc0b65100   ( 653 kB)
       .data : 0xc0b66000 - 0xc0c45800   ( 894 kB)
        .bss : 0xc0c45808 - 0xc0c91898   ( 305 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
@@ -117,7 +117,7 @@
 Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x80802720 - 0x808027b8
+Setting up static identity map for 0x808036d0 - 0x80803768
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: Booted secondary processor
@@ -396,8 +396,8 @@
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 652K (c0ac1000 - c0b64000)
+Freeing unused kernel memory: 652K (c0ac2000 - c0b65000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.263726] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.273724] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:68:6d
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2014-08-04 00:55:21.742962276 -0700
+++ /tmp/foob	2014-08-04 00:55:21.742962276 -0700
@@ -36,20 +36,20 @@
 	 #################################################################
 	 #################################################################
 	 ##########################################
-	 3.2 MiB/s
+	 2.8 MiB/s
 done
-Bytes transferred = 4420152 (437238 hex)
+Bytes transferred = 4423800 (438078 hex)
 Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
 Using asx0 device
 TFTP from server 192.168.100.1; our IP address is 192.168.100.101
 Filename 'tegra30-beaver.dtb'.
 Load address: 0x82000000
 Loading: *##
-	 3.3 MiB/s
+	 2.6 MiB/s
 done
 Bytes transferred = 24197 (5e85 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
-Kernel image @ 0x81000000 [ 0x000000 - 0x437238 ]
+Kernel image @ 0x81000000 [ 0x000000 - 0x438078 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
    Loading Device Tree to 8fff7000, end 8ffffe84 ... OK
@@ -60,7 +60,7 @@
 Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 3.16.0-rc7-79660-g64aa90f (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Sun Jul 27 13:04:47 PDT 2014
+Linux version 3.16.0-79775-g19583ca (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Mon Aug 4 00:46:04 PDT 2014
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -85,7 +85,7 @@
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2004000K/2096128K available (6035K kernel code, 330K rwdata, 1992K rodata, 264K init, 357K bss, 92128K reserved, 1317888K highmem)
+Memory: 2004000K/2096128K available (6039K kernel code, 330K rwdata, 1992K rodata, 264K init, 357K bss, 92128K reserved, 1317888K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
@@ -93,8 +93,8 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc07df288   (8029 kB)
-      .init : 0xc07e0000 - 0xc0822240   ( 265 kB)
+      .text : 0xc0008000 - 0xc07e034c   (8033 kB)
+      .init : 0xc07e1000 - 0xc0823240   ( 265 kB)
       .data : 0xc0824000 - 0xc0876a80   ( 331 kB)
        .bss : 0xc0876a8c - 0xc08cfffc   ( 358 kB)
 Preemptible hierarchical RCU implementation.
@@ -118,7 +118,7 @@
 Initializing cgroup subsys debug
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x805b8c48 - 0x805b8ce0
+Setting up static identity map for 0x805b9bd0 - 0x805b9c68
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: Booted secondary processor
@@ -390,8 +390,8 @@
 EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 264K (c07e0000 - c0822000)
+Freeing unused kernel memory: 264K (c07e1000 - c0823000)
 bash: cannot set terminal process group (-1): Inappropriate ioctl for device
 bash: no job control in this shell
-root@(none):/# [    4.636740] usb 2-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# [    4.647027] usb 2-1: new high-speed USB device number 2 using tegra-ehci
 asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:68:6d
