Diff for ./tegra114-dalmore-a04/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	1969-12-31 16:00:00.000000000 -0800
+++ /tmp/foob	2014-02-27 02:31:13.491783771 -0800
@@ -0,0 +1,367 @@
+
+U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32)
+
+
+U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32)
+
+TEGRA114
+Board: NVIDIA Dalmore
+I2C:   ready
+DRAM:  2 GiB
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+In:    serial
+Out:   serial
+Err:   serial
+Net:   Net Initialization Skipped
+No ethernet found.
+Hit any key to stop autoboot:  2  0 
+Tegra114 (Dalmore) # 
+Tegra114 (Dalmore) # usb reset
+(Re)start USB...
+USB0:   USB EHCI 1.10
+scanning bus 0 for devices... 2 USB Device(s) found
+       scanning usb for storage devices... 0 Storage Device(s) found
+       scanning usb for ethernet devices... 
+Warning: asx0 using MAC address from net device
+1 Ethernet Device(s) found
+Tegra114 (Dalmore) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash'
+Tegra114 (Dalmore) # setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra114 (Dalmore) # tftpboot 0x81000000 zImage.multi_v7_defconfig
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.100
+Filename 'zImage.multi_v7_defconfig'.
+Load address: 0x81000000
+Loading: *#################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 ###############################################
+	 3.5 MiB/s
+done
+Bytes transferred = 4497344 (449fc0 hex)
+Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.100
+Filename 'tegra114-dalmore.dtb'.
+Load address: 0x82000000
+Loading: *###
+	 3.2 MiB/s
+done
+Bytes transferred = 34015 (84df hex)
+Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
+Kernel image @ 0x81000000 [ 0x000000 - 0x449fc0 ]
+## Flattened Device Tree blob at 82000000
+   Booting using the fdt blob at 0x82000000
+   Loading Device Tree to 8fff4000, end 8ffff4de ... OK
+
+Starting kernel ...
+
+Booting Linux on physical CPU 0x0
+Linux version 3.14.0-rc1-49026-g38dbfb5 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Feb 27 02:22:57 PST 2014
+CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
+CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
+Machine model: NVIDIA Tegra114 Dalmore evaluation board
+debug: ignoring loglevel setting.
+cma: CMA: reserved 16 MiB at ae800000
+Memory policy: Data cache writealloc
+On node 0 totalpages: 524032
+free_area_init_node: node 0, pgdat c092ba80, node_mem_map ed7f1000
+  DMA zone: 1520 pages used for memmap
+  DMA zone: 0 pages reserved
+  DMA zone: 194560 pages, LIFO batch:31
+  HighMem zone: 2574 pages used for memmap
+  HighMem zone: 329472 pages, LIFO batch:31
+Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 1
+PERCPU: Embedded 7 pages/cpu @ed7b8000 s8192 r8192 d12288 u32768
+pcpu-alloc: s8192 r8192 d12288 u32768 alloc=8*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash
+PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 2052608K/2096128K available (5839K kernel code, 677K rwdata, 2336K rodata, 508K init, 284K bss, 43520K reserved, 1317888K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
+    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0008000 - 0xc0803e74   (8176 kB)
+      .init : 0xc0804000 - 0xc0883000   ( 508 kB)
+      .data : 0xc0884000 - 0xc092d600   ( 678 kB)
+       .bss : 0xc092d608 - 0xc0974740   ( 285 kB)
+SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
+Hierarchical RCU implementation.
+NR_IRQS:16 nr_irqs:16 16
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+Architected cp15 timer(s) running at 12.00MHz (virt).
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
+Switching to timer-based delay loop
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 512
+CPU: Testing write buffer coherency: ok
+/cpus/cpu@0 missing clock-frequency property
+/cpus/cpu@1 missing clock-frequency property
+/cpus/cpu@2 missing clock-frequency property
+/cpus/cpu@3 missing clock-frequency property
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x805849c8 - 0x80584a60
+unable to find compatible sirf rstc node in dtb
+CPU1: Booted secondary processor
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: Booted secondary processor
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: Booted secondary processor
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+Brought up 4 CPUs
+SMP: Total of 4 processors activated.
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+pinctrl core: initialized pinctrl subsystem
+regulator-dummy: no parameters
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor ladder
+cpuidle: using governor menu
+No ATAGs?
+Serial: AMBA PL011 UART driver
+bio: create slab <bio-0> at 0
+edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
+edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
+vdd_ac_bat: 5000 mV 
+dvdd_ts: Failed to request enable GPIO61: -517
+reg-fixed-voltage 1.regulator: Failed to register regulator: -517
+platform 1.regulator: Driver reg-fixed-voltage requests probe deferral
+usb1_vbus: Failed to request enable GPIO108: -517
+reg-fixed-voltage 3.regulator: Failed to register regulator: -517
+platform 3.regulator: Driver reg-fixed-voltage requests probe deferral
+usb2_vbus: Failed to request enable GPIO86: -517
+reg-fixed-voltage 4.regulator: Failed to register regulator: -517
+platform 4.regulator: Driver reg-fixed-voltage requests probe deferral
+vdd_hdmi_5v0: Failed to request enable GPIO81: -517
+reg-fixed-voltage 5.regulator: Failed to register regulator: -517
+platform 5.regulator: Driver reg-fixed-voltage requests probe deferral
+platform 6.regulator: Driver reg-fixed-voltage requests probe deferral
+vgaarb: loaded
+SCSI subsystem initialized
+libata version 3.00 loaded.
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+vdd-cpu: 500 <--> 1520 mV at 1100 mV 
+tps65090 2-0048: No cache defaults, reading back from HW
+vdd-sys-5v0: no parameters
+vdd-sys-5v0: supplied by vdd_ac_bat
+vdd-sys-3v3: no parameters
+vdd-sys-3v3: supplied by vdd_ac_bat
+vdd-ao: no parameters
+vdd-ao: supplied by vdd_ac_bat
+vdd-lcd-bl: no parameters
+vdd-lcd-bl: supplied by vdd_ac_bat
+TPS65090_RAILSFET2: no parameters
+TPS65090_RAILSFET2: supplied by vdd_ac_bat
+vdd-modem-3v3: no parameters
+vdd-modem-3v3: supplied by vdd-sys-3v3
+avdd-lcd: no parameters
+avdd-lcd: supplied by vdd-sys-3v3
+vdd-lvds: no parameters
+vdd-lvds: supplied by vdd-sys-3v3
+vdd-sd-slot: no parameters
+vdd-sd-slot: supplied by vdd-sys-3v3
+vdd-com-3v3: no parameters
+vdd-com-3v3: supplied by vdd-sys-3v3
+vdd-sby-5v0: no parameters
+vdd-sby-5v0: supplied by vdd_ac_bat
+vdd-sby-3v3: no parameters
+vdd-sby-3v3: supplied by vdd_ac_bat
+genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0xfc)
+palmas 2-0058: Irq flag is 0x00000000
+palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
+vddio-ddr: 1350 mV 
+vddio-ddr: supplied by vdd-ao
+vddio-1v8: 1800 mV 
+vddio-1v8: supplied by vdd-ao
+vdd-core: 900 <--> 1400 mV at 1100 mV 
+vdd-core: supplied by vdd-sys-3v3
+SMPS6: no parameters
+avdd-pll: 1050 mV 
+avdd-pll: supplied by vdd-sys-3v3
+sdhci-vdd-sd-slot: 2800 mV 
+sdhci-vdd-sd-slot: supplied by vdd-sys-3v3
+SMPS10_OUT2: at 5000 mV 
+SMPS10_OUT1: at 5000 mV 
+avdd-cam1: 2800 mV 
+avdd-cam1: supplied by vdd-sys-3v3
+avdd-cam2: 2800 mV 
+avdd-cam2: supplied by vdd-sys-3v3
+avdd-dsi-csi: 1200 mV 
+avdd-dsi-csi: supplied by vddio-1v8
+vpp-fuse: 1800 mV 
+vpp-fuse: supplied by vdd-sys-3v3
+LDO5: no parameters
+LDO5: supplied by vdd_ac_bat
+vdd-sensor-2v85: 2850 mV 
+vdd-sensor-2v85: supplied by vdd-sys-3v3
+vdd-af-cam1: 2800 mV 
+vdd-af-cam1: supplied by vdd-sys-3v3
+vdd-rtc: 900 mV 
+vdd-rtc: supplied by vdd-ao
+vddio-sdmmc-2: 1800 <--> 3300 mV at 3300 mV 
+vddio-sdmmc-2: supplied by sdhci-vdd-sd-slot
+hvdd-usb: 3300 mV 
+hvdd-usb: supplied by vdd-sys-5v0
+avdd-usb: 3300 mV 
+avdd-usb: supplied by vdd-sys-5v0
+rail-3v3: no parameters
+rail-5v0: no parameters
+REGEN3: no parameters
+SYSEN1: no parameters
+SYSEN2: no parameters
+Linux video capture interface: v2.00
+pps_core: LinuxPPS API ver. 1 registered
+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+PTP clock support registered
+EDAC MC: Ver: 3.0.0
+platform 70019010.iommu: Driver tegra-smmu requests probe deferral
+Advanced Linux Sound Architecture Driver Initialized.
+Switched to clocksource arch_sys_counter
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+TCP: reno registered
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+bounce pool size: 64 pages
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+NFS: Registering the id_resolver key type
+Key type id_resolver registered
+Key type id_legacy registered
+msgmni has been set to 1467
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
+io scheduler noop registered
+io scheduler deadline registered
+io scheduler cfq registered (default)
+tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+Serial: IMX driver
+70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+STMicroelectronics ASC driver initialized
+serial: Freescale lpuart driver
+[drm] Initialized drm 1.1.0 20060810
+tegra-dc 54200000.dc: missing "nvidia,head" property
+tegra-dc 54240000.dc: missing "nvidia,head" property
+platform 54300000.dsi: Driver tegra-dsi requests probe deferral
+tegra-hdmi 54280000.hdmi: failed to get VDD regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+loop: module loaded
+m25p80 spi32766.0: w25q32dw (4096 Kbytes)
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver r815x
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+ehci-platform: EHCI generic platform driver
+ehci-omap: OMAP-EHCI Host Controller driver
+ehci-orion: EHCI orion driver
+SPEAr-ehci: EHCI SPEAr driver
+tegra-ehci: Tegra EHCI driver
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+usbcore: registered new interface driver usb-storage
+platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
+mousedev: PS/2 mouse device common for all mice
+palmas-rtc rtc.8: rtc core: registered rtc.8 as rtc0
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+i2c /dev entries driver
+sbs-battery 0-000b: sbs_probe: Failed to get device status
+sbs-battery: probe of 0-000b failed with error -121
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 78000400.sdhci: Got CD GPIO #170.
+mmc0: no vqmmc regulator found
+mmc0: no vmmc regulator found
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA
+mmc1: no vqmmc regulator found
+mmc1: no vmmc regulator found
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+mmc1: BKOPS_EN bit is not set
+mmc1: new HS200 MMC card at address 0001
+isa bounce pool size: 16 pages
+mmcblk0: mmc1:0001 SEM32G 29.1 GiB 
+mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
+mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
+mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
+ mmcblk0boot1: unknown partition table
+ mmcblk0boot0: unknown partition table
+tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
+tegra-snd-rt5640 sound.5: rt5640-aif1 <-> 70080400.i2s mapping ok
+input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0
+TCP: cubic registered
+NET: Registered protocol family 17
+Key type dns_resolver registered
+Registering SWP/SWPB emulation handler
+dvdd_ts: 1800 mV 
+usb1_vbus: 5000 mV 
+usb1_vbus: supplied by vdd-sys-5v0
+usb2_vbus: 5000 mV 
+usb2_vbus: supplied by vdd-sys-5v0
+vdd_hdmi_5v0: 5000 mV 
+vdd_hdmi_5v0: supplied by vdd-sys-5v0
+vdd_cam_1v8_reg: 1800 mV 
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+Console: switching to colour frame buffer device 240x75
+host1x drm: fb0:  frame buffer device
+host1x drm: registered panic notifier
+[drm] Initialized tegra 0.0.0 20120330 on minor 0
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1
+palmas-rtc rtc.8: setting system clock to 2000-01-13 01:33:55 UTC (947727235)
+spear_cpufreq: Invalid cpufreq_tbl
+ALSA device list:
+  #0: NVIDIA Tegra Dalmore
+EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
+EXT4-fs (mmcblk0p1): recovery complete
+EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
+VFS: Mounted root (ext3 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 508K (c0804000 - c0883000)
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
+root@(none):/# 
\ No newline at end of file
Diff for ./tegra114-dalmore-a04/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	1969-12-31 16:00:00.000000000 -0800
+++ /tmp/foob	2014-02-27 02:31:13.495783776 -0800
@@ -0,0 +1,368 @@
+
+U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32)
+
+
+U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:32)
+
+TEGRA114
+Board: NVIDIA Dalmore
+I2C:   ready
+DRAM:  2 GiB
+MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
+In:    serial
+Out:   serial
+Err:   serial
+Net:   Net Initialization Skipped
+No ethernet found.
+Hit any key to stop autoboot:  2  0 
+Tegra114 (Dalmore) # 
+Tegra114 (Dalmore) # usb reset
+(Re)start USB...
+USB0:   USB EHCI 1.10
+scanning bus 0 for devices... 2 USB Device(s) found
+       scanning usb for storage devices... 0 Storage Device(s) found
+       scanning usb for ethernet devices... 
+Warning: asx0 using MAC address from net device
+1 Ethernet Device(s) found
+Tegra114 (Dalmore) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash'
+Tegra114 (Dalmore) # setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra114 (Dalmore) # tftpboot 0x81000000 zImage.tegra_defconfig
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.100
+Filename 'zImage.tegra_defconfig'.
+Load address: 0x81000000
+Loading: *#################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 ############################
+	 3.4 MiB/s
+done
+Bytes transferred = 4227488 (4081a0 hex)
+Tegra114 (Dalmore) # tftpboot 0x82000000 tegra114-dalmore.dtb
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.100
+Filename 'tegra114-dalmore.dtb'.
+Load address: 0x82000000
+Loading: *###
+	 2.7 MiB/s
+done
+Bytes transferred = 34015 (84df hex)
+Tegra114 (Dalmore) # bootz 0x81000000 - 0x82000000
+Kernel image @ 0x81000000 [ 0x000000 - 0x4081a0 ]
+## Flattened Device Tree blob at 82000000
+   Booting using the fdt blob at 0x82000000
+   Loading Device Tree to 8fff4000, end 8ffff4de ... OK
+
+Starting kernel ...
+
+Uncompressing Linux... done, booting the kernel.
+Booting Linux on physical CPU 0x0
+Initializing cgroup subsys cpu
+Initializing cgroup subsys cpuacct
+Linux version 3.14.0-rc1-49026-g38dbfb5 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Feb 27 02:23:37 PST 2014
+CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
+CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
+Machine model: NVIDIA Tegra114 Dalmore evaluation board
+debug: ignoring loglevel setting.
+cma: CMA: reserved 16 MiB at ae800000
+Memory policy: Data cache writealloc
+On node 0 totalpages: 524032
+free_area_init_node: node 0, pgdat c0817bc0, node_mem_map ed7f0000
+  Normal zone: 1520 pages used for memmap
+  Normal zone: 0 pages reserved
+  Normal zone: 194560 pages, LIFO batch:31
+  HighMem zone: 2574 pages used for memmap
+  HighMem zone: 329472 pages, LIFO batch:31
+Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 1
+PERCPU: Embedded 8 pages/cpu @ed7b7000 s9152 r8192 d15424 u32768
+pcpu-alloc: s9152 r8192 d15424 u32768 alloc=8*4096
+pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash
+PID hash table entries: 4096 (order: 2, 16384 bytes)
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 2053636K/2096128K available (5751K kernel code, 316K rwdata, 1936K rodata, 248K init, 340K bss, 42492K reserved, 1317888K highmem)
+Virtual kernel memory layout:
+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
+    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
+    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0008000 - 0xc078a00c   (7689 kB)
+      .init : 0xc078b000 - 0xc07c93c0   ( 249 kB)
+      .data : 0xc07ca000 - 0xc0819320   ( 317 kB)
+       .bss : 0xc081932c - 0xc086e698   ( 341 kB)
+Preemptible hierarchical RCU implementation.
+NR_IRQS:16 nr_irqs:16 16
+sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
+Architected cp15 timer(s) running at 12.00MHz (virt).
+sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
+Switching to timer-based delay loop
+Console: colour dummy device 80x30
+Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
+pid_max: default: 32768 minimum: 301
+Mount-cache hash table entries: 512
+Initializing cgroup subsys debug
+Initializing cgroup subsys freezer
+CPU: Testing write buffer coherency: ok
+/cpus/cpu@0 missing clock-frequency property
+/cpus/cpu@1 missing clock-frequency property
+/cpus/cpu@2 missing clock-frequency property
+/cpus/cpu@3 missing clock-frequency property
+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+Setting up static identity map for 0x80573378 - 0x80573410
+CPU1: Booted secondary processor
+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+CPU2: Booted secondary processor
+CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+CPU3: Booted secondary processor
+CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+Brought up 4 CPUs
+SMP: Total of 4 processors activated.
+CPU: All CPU(s) started in SVC mode.
+devtmpfs: initialized
+VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
+pinctrl core: initialized pinctrl subsystem
+regulator-dummy: no parameters
+NET: Registered protocol family 16
+DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor ladder
+cpuidle: using governor menu
+No ATAGs?
+hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
+hw-breakpoint: maximum watchpoint size is 8 bytes.
+bio: create slab <bio-0> at 0
+vdd_ac_bat: 5000 mV 
+dvdd_ts: Failed to request enable GPIO61: -517
+reg-fixed-voltage 1.regulator: Failed to register regulator: -517
+platform 1.regulator: Driver reg-fixed-voltage requests probe deferral
+usb1_vbus: Failed to request enable GPIO108: -517
+reg-fixed-voltage 3.regulator: Failed to register regulator: -517
+platform 3.regulator: Driver reg-fixed-voltage requests probe deferral
+usb2_vbus: Failed to request enable GPIO86: -517
+reg-fixed-voltage 4.regulator: Failed to register regulator: -517
+platform 4.regulator: Driver reg-fixed-voltage requests probe deferral
+vdd_hdmi_5v0: Failed to request enable GPIO81: -517
+reg-fixed-voltage 5.regulator: Failed to register regulator: -517
+platform 5.regulator: Driver reg-fixed-voltage requests probe deferral
+platform 6.regulator: Driver reg-fixed-voltage requests probe deferral
+vgaarb: loaded
+SCSI subsystem initialized
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+vdd-cpu: 500 <--> 1520 mV at 1100 mV 
+tps65090 2-0048: No cache defaults, reading back from HW
+vdd-sys-5v0: no parameters
+vdd-sys-5v0: supplied by vdd_ac_bat
+vdd-sys-3v3: no parameters
+vdd-sys-3v3: supplied by vdd_ac_bat
+vdd-ao: no parameters
+vdd-ao: supplied by vdd_ac_bat
+vdd-lcd-bl: no parameters
+vdd-lcd-bl: supplied by vdd_ac_bat
+TPS65090_RAILSFET2: no parameters
+TPS65090_RAILSFET2: supplied by vdd_ac_bat
+vdd-modem-3v3: no parameters
+vdd-modem-3v3: supplied by vdd-sys-3v3
+avdd-lcd: no parameters
+avdd-lcd: supplied by vdd-sys-3v3
+vdd-lvds: no parameters
+vdd-lvds: supplied by vdd-sys-3v3
+vdd-sd-slot: no parameters
+vdd-sd-slot: supplied by vdd-sys-3v3
+vdd-com-3v3: no parameters
+vdd-com-3v3: supplied by vdd-sys-3v3
+vdd-sby-5v0: no parameters
+vdd-sby-5v0: supplied by vdd_ac_bat
+vdd-sby-3v3: no parameters
+vdd-sby-3v3: supplied by vdd_ac_bat
+genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0xf0)
+palmas 2-0058: Irq flag is 0x00000000
+palmas 2-0058: Muxing GPIO ff, PWM 0, LED 0
+vddio-ddr: 1350 mV 
+vddio-ddr: supplied by vdd-ao
+vddio-1v8: 1800 mV 
+vddio-1v8: supplied by vdd-ao
+vdd-core: 900 <--> 1400 mV at 1100 mV 
+vdd-core: supplied by vdd-sys-3v3
+SMPS6: no parameters
+avdd-pll: 1050 mV 
+avdd-pll: supplied by vdd-sys-3v3
+sdhci-vdd-sd-slot: 2800 mV 
+sdhci-vdd-sd-slot: supplied by vdd-sys-3v3
+SMPS10_OUT2: at 5000 mV 
+SMPS10_OUT1: at 5000 mV 
+avdd-cam1: 2800 mV 
+avdd-cam1: supplied by vdd-sys-3v3
+avdd-cam2: 2800 mV 
+avdd-cam2: supplied by vdd-sys-3v3
+avdd-dsi-csi: 1200 mV 
+avdd-dsi-csi: supplied by vddio-1v8
+vpp-fuse: 1800 mV 
+vpp-fuse: supplied by vdd-sys-3v3
+LDO5: no parameters
+LDO5: supplied by vdd_ac_bat
+vdd-sensor-2v85: 2850 mV 
+vdd-sensor-2v85: supplied by vdd-sys-3v3
+vdd-af-cam1: 2800 mV 
+vdd-af-cam1: supplied by vdd-sys-3v3
+vdd-rtc: 900 mV 
+vdd-rtc: supplied by vdd-ao
+vddio-sdmmc-2: 1800 <--> 3300 mV at 3300 mV 
+vddio-sdmmc-2: supplied by sdhci-vdd-sd-slot
+hvdd-usb: 3300 mV 
+hvdd-usb: supplied by vdd-sys-5v0
+avdd-usb: 3300 mV 
+avdd-usb: supplied by vdd-sys-5v0
+rail-3v3: no parameters
+rail-5v0: no parameters
+REGEN3: no parameters
+SYSEN1: no parameters
+SYSEN2: no parameters
+Linux video capture interface: v2.00
+platform 70019010.iommu: Driver tegra-smmu requests probe deferral
+Advanced Linux Sound Architecture Driver Initialized.
+Bluetooth: Core ver 2.18
+NET: Registered protocol family 31
+Bluetooth: HCI device and connection manager initialized
+Bluetooth: HCI socket layer initialized
+Bluetooth: L2CAP socket layer initialized
+Bluetooth: SCO socket layer initialized
+cfg80211: Calling CRDA to update world regulatory domain
+Switched to clocksource arch_sys_counter
+NET: Registered protocol family 2
+TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 8192 bind 8192)
+TCP: reno registered
+UDP hash table entries: 512 (order: 2, 16384 bytes)
+UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
+NET: Registered protocol family 1
+RPC: Registered named UNIX socket transport module.
+RPC: Registered udp transport module.
+RPC: Registered tcp transport module.
+RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+futex hash table entries: 1024 (order: 4, 65536 bytes)
+bounce pool size: 64 pages
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
+msgmni has been set to 1469
+io scheduler noop registered (default)
+tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
+Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
+70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122, base_baud = 25500000) is a Tegra
+console [ttyS0] enabled
+[drm] Initialized drm 1.1.0 20060810
+tegra-dc 54200000.dc: missing "nvidia,head" property
+tegra-dc 54240000.dc: missing "nvidia,head" property
+platform 54300000.dsi: Driver tegra-dsi requests probe deferral
+tegra-hdmi 54280000.hdmi: failed to get VDD regulator
+platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+loop: module loaded
+m25p80 spi32766.0: w25q32dw (4096 Kbytes)
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver r815x
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
+tegra-ehci: Tegra EHCI driver
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+usbcore: registered new interface driver cdc_acm
+cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
+usbcore: registered new interface driver cdc_wdm
+usbcore: registered new interface driver usb-storage
+platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
+mousedev: PS/2 mouse device common for all mice
+palmas-rtc rtc.8: rtc core: registered rtc.8 as rtc0
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
+tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+sbs-battery 0-000b: sbs_probe: Failed to get device status
+sbs-battery: probe of 0-000b failed with error -121
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+sdhci-pltfm: SDHCI platform and OF driver helper
+sdhci-tegra 78000400.sdhci: Got CD GPIO #170.
+mmc0: no vqmmc regulator found
+mmc0: no vmmc regulator found
+mmc0: Invalid maximum block size, assuming 512 bytes
+mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA
+mmc1: no vqmmc regulator found
+mmc1: no vmmc regulator found
+mmc1: Invalid maximum block size, assuming 512 bytes
+mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
+usbcore: registered new interface driver usbhid
+usbhid: USB HID core driver
+mmc1: BKOPS_EN bit is not set
+mmc1: new HS200 MMC card at address 0001
+isa bounce pool size: 16 pages
+mmcblk0: mmc1:0001 SEM32G 29.1 GiB 
+mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
+mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
+mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
+ mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
+ mmcblk0boot1: unknown partition table
+ mmcblk0boot0: unknown partition table
+tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
+tegra-snd-rt5640 sound.5: rt5640-aif1 <-> 70080400.i2s mapping ok
+input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0
+TCP: cubic registered
+NET: Registered protocol family 10
+mip6: Mobile IPv6
+sit: IPv6 over IPv4 tunneling driver
+NET: Registered protocol family 17
+NET: Registered protocol family 15
+Bluetooth: RFCOMM socket layer initialized
+Bluetooth: RFCOMM ver 1.11
+Bluetooth: BNEP (Ethernet Emulation) ver 1.3
+Bluetooth: BNEP socket layer initialized
+Bluetooth: HIDP (Human Interface Emulation) ver 1.2
+Bluetooth: HIDP socket layer initialized
+Registering SWP/SWPB emulation handler
+dvdd_ts: 1800 mV 
+usb1_vbus: 5000 mV 
+usb1_vbus: supplied by vdd-sys-5v0
+usb2_vbus: 5000 mV 
+usb2_vbus: supplied by vdd-sys-5v0
+vdd_hdmi_5v0: 5000 mV 
+vdd_hdmi_5v0: supplied by vdd-sys-5v0
+vdd_cam_1v8_reg: 1800 mV 
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+Console: switching to colour frame buffer device 240x75
+host1x drm: fb0:  frame buffer device
+host1x drm: registered panic notifier
+[drm] Initialized tegra 0.0.0 20120330 on minor 0
+platform 7d008000.usb: Driver tegra-ehci requests probe deferral
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1
+palmas-rtc rtc.8: setting system clock to 2000-01-13 01:34:31 UTC (947727271)
+ALSA device list:
+  #0: NVIDIA Tegra Dalmore
+kjournald starting.  Commit interval 5 seconds
+EXT3-fs (mmcblk0p1): using internal journal
+EXT3-fs (mmcblk0p1): recovery complete
+EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
+VFS: Mounted root (ext3 filesystem) on device 179:1.
+devtmpfs: mounted
+Freeing unused kernel memory: 248K (c078b000 - c07c9000)
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    2.780681] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra114-dalmore-headless/tegra114-dalmore/multi_v7_defconfig_log.txt
--- /tmp/fooa	2014-02-27 02:31:13.503783786 -0800
+++ /tmp/foob	1969-12-31 16:00:00.000000000 -0800
@@ -1,271 +0,0 @@
-
-
-U-Boot 2011.03 (Jun 11 2013 - 06:07:37)
-
-T114
-Board: NVIDIA Dalmore
-DRAM:  2 GiB
-MMC:   Tegra2 SD/MMC: 0, Tegra2 SD/MMC: 1
-In:    serial
-Out:   serial
-Err:   serial
-Net:   Net Initialization Skipped
-No ethernet found.
-Hit any key to stop autoboot:  2  1  0 
-Dalmore #
-Dalmore #usb reset
-(Re)start USB...
-USB:   Register 10011 NbrPorts 1
-USB EHCI 1.10
-scanning bus for devices... 2 USB Device(s) found
-       scanning bus for storage devices... 0 Storage Device(s) found
-       scanning bus for ethernet devices... 1 Ethernet Device(s) found
-Dalmore #setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt init=/bin/bash'
-Dalmore #setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
-Dalmore #tftpboot 0x81000000 zImage.multi_v7_defconfig
-Waiting for Ethernet connection... done.
-Using asx0 device
-TFTP from server 192.168.100.1; our IP address is 192.168.100.100
-Filename 'zImage.multi_v7_defconfig'.
-Load address: 0x81000000
-Loading: *#################################################  2.8 MiB/s
-done
-Bytes transferred = 3650392 (37b358 hex)
-Dalmore #tftpboot 0x82000000 tegra114-dalmore.dtb
-Using asx0 device
-TFTP from server 192.168.100.1; our IP address is 192.168.100.100
-Filename 'tegra114-dalmore.dtb'.
-Load address: 0x82000000
-Loading: *#################################################  2.3 MiB/s
-done
-Bytes transferred = 29436 (72fc hex)
-Dalmore #bootz 0x81000000 - 0x82000000
-## Flattened Device Tree blob at 82000000
-   Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 81ff5000, end 81fff2fb ... OK
-
-Starting kernel ...
-
-Timer summary in microseconds:
-       Mark    Elapsed  Stage
-          0          0  awake
-  3,092,741  3,092,741  usb_start
-  7,096,038  4,003,297  eth_start
-  7,096,036         -2  tftp start
- 10,780,230  3,684,194  tftp done
- 12,107,808  1,327,578  start_kernel
-Booting Linux on physical CPU 0x0
-Linux version 3.13.0-37659-gd8ec26d (pwalmsley@tamien) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Sun Jan 19 19:09:11 PST 2014
-CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
-CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
-Machine model: NVIDIA Tegra114 Dalmore evaluation board
-debug: ignoring loglevel setting.
-Memory policy: Data cache writealloc
-On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0752700, node_mem_map c079b000
-  DMA zone: 1520 pages used for memmap
-  DMA zone: 0 pages reserved
-  DMA zone: 194560 pages, LIFO batch:31
-  HighMem zone: 2574 pages used for memmap
-  HighMem zone: 329472 pages, LIFO batch:31
-Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 1
-PERCPU: Embedded 5 pages/cpu @c17b3000 s6976 r0 d13504 u32768
-pcpu-alloc: s6976 r0 d13504 u32768 alloc=8*4096
-pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
-Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
-Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt init=/bin/bash
-PID hash table entries: 4096 (order: 2, 16384 bytes)
-Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
-Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2070932K/2096128K available (4980K kernel code, 589K rwdata, 1420K rodata, 474K init, 284K bss, 25196K reserved, 1317888K highmem)
-Virtual kernel memory layout:
-    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
-    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
-    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
-    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
-    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
-      .text : 0xc0008000 - 0xc0648308   (6401 kB)
-      .init : 0xc0649000 - 0xc06bfb40   ( 475 kB)
-      .data : 0xc06c0000 - 0xc0753500   ( 590 kB)
-       .bss : 0xc0753508 - 0xc079a80c   ( 285 kB)
-SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
-Hierarchical RCU implementation.
-NR_IRQS:16 nr_irqs:16 16
-sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
-Architected cp15 timer(s) running at 12.00MHz (virt).
-sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
-Switching to timer-based delay loop
-Console: colour dummy device 80x30
-Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
-pid_max: default: 32768 minimum: 301
-Mount-cache hash table entries: 512
-CPU: Testing write buffer coherency: ok
-/cpus/cpu@0 missing clock-frequency property
-/cpus/cpu@1 missing clock-frequency property
-/cpus/cpu@2 missing clock-frequency property
-/cpus/cpu@3 missing clock-frequency property
-CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x804b6e98 - 0x804b6f30
-unable to find compatible sirf rstc node in dtb
-CPU1: Booted secondary processor
-CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
-CPU2: Booted secondary processor
-CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
-CPU3: Booted secondary processor
-CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
-Brought up 4 CPUs
-SMP: Total of 4 processors activated.
-CPU: All CPU(s) started in SVC mode.
-devtmpfs: initialized
-VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
-pinctrl core: initialized pinctrl subsystem
-regulator-dummy: no parameters
-NET: Registered protocol family 16
-DMA: preallocated 256 KiB pool for atomic coherent allocations
-Serial: AMBA PL011 UART driver
-bio: create slab <bio-0> at 0
-edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
-edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
-vdd_ac_bat: 5000 mV 
-dvdd_ts: Failed to request enable GPIO61: -517
-reg-fixed-voltage 1.regulator: Failed to register regulator: -517
-platform 1.regulator: Driver reg-fixed-voltage requests probe deferral
-lcd_bl_en: Failed to request enable GPIO58: -517
-reg-fixed-voltage 2.regulator: Failed to register regulator: -517
-platform 2.regulator: Driver reg-fixed-voltage requests probe deferral
-usb1_vbus: Failed to request enable GPIO108: -517
-reg-fixed-voltage 3.regulator: Failed to register regulator: -517
-platform 3.regulator: Driver reg-fixed-voltage requests probe deferral
-usb2_vbus: Failed to request enable GPIO86: -517
-reg-fixed-voltage 4.regulator: Failed to register regulator: -517
-platform 4.regulator: Driver reg-fixed-voltage requests probe deferral
-vdd_hdmi_5v0: Failed to request enable GPIO81: -517
-reg-fixed-voltage 5.regulator: Failed to register regulator: -517
-platform 5.regulator: Driver reg-fixed-voltage requests probe deferral
-platform 6.regulator: Driver reg-fixed-voltage requests probe deferral
-SCSI subsystem initialized
-libata version 3.00 loaded.
-usbcore: registered new interface driver usbfs
-usbcore: registered new interface driver hub
-usbcore: registered new device driver usb
-vdd-cpu: 500 <--> 1520 mV at 1100 mV 
-genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0x100)
-pps_core: LinuxPPS API ver. 1 registered
-pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
-PTP clock support registered
-EDAC MC: Ver: 3.0.0
-Switched to clocksource arch_sys_counter
-NET: Registered protocol family 2
-TCP established hash table entries: 8192 (order: 3, 32768 bytes)
-TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
-TCP: Hash tables configured (established 8192 bind 8192)
-TCP: reno registered
-UDP hash table entries: 512 (order: 2, 16384 bytes)
-UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
-NET: Registered protocol family 1
-RPC: Registered named UNIX socket transport module.
-RPC: Registered udp transport module.
-RPC: Registered tcp transport module.
-RPC: Registered tcp NFSv4.1 backchannel transport module.
-bounce pool size: 64 pages
-NFS: Registering the id_resolver key type
-Key type id_resolver registered
-Key type id_legacy registered
-Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
-io scheduler noop registered
-io scheduler deadline registered
-io scheduler cfq registered (default)
-tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
-Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-Serial: IMX driver
-70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122, base_baud = 25500000) is a Tegra
-console [ttyS0] enabled
-serial: Freescale lpuart driver
-[drm] Initialized drm 1.1.0 20060810
-ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
-ehci-platform: EHCI generic platform driver
-ehci-omap: OMAP-EHCI Host Controller driver
-ehci-orion: EHCI orion driver
-SPEAr-ehci: EHCI SPEAr driver
-tegra-ehci: Tegra EHCI driver
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
-usbcore: registered new interface driver usb-storage
-platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
-mousedev: PS/2 mouse device common for all mice
-tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc0
-tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
-sdhci: Secure Digital Host Controller Interface driver
-sdhci: Copyright(c) Pierre Ossman
-sdhci-pltfm: SDHCI platform and OF driver helper
-sdhci-tegra 78000400.sdhci: Got CD GPIO #170.
-sdhci-tegra 78000400.sdhci: dummy supplies not allowed
-mmc0: no vqmmc regulator found
-sdhci-tegra 78000400.sdhci: dummy supplies not allowed
-mmc0: no vmmc regulator found
-mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA
-sdhci-tegra 78000600.sdhci: dummy supplies not allowed
-mmc1: no vqmmc regulator found
-sdhci-tegra 78000600.sdhci: dummy supplies not allowed
-mmc1: no vmmc regulator found
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
-usbcore: registered new interface driver usbhid
-usbhid: USB HID core driver
-TCP: cubic registered
-NET: Registered protocol family 10
-sit: IPv6 over IPv4 tunneling driver
-Key type dns_resolver registered
-Registering SWP/SWPB emulation handler
-dvdd_ts: 1800 mV 
-lcd_bl_en: 5000 mV 
-usb1_vbus: 5000 mV 
-reg-fixed-voltage 3.regulator: Failed to find supply vin
-reg-fixed-voltage 3.regulator: Failed to register regulator: -517
-platform 3.regulator: Driver reg-fixed-voltage requests probe deferral
-usb2_vbus: 5000 mV 
-reg-fixed-voltage 4.regulator: Failed to find supply vin
-reg-fixed-voltage 4.regulator: Failed to register regulator: -517
-platform 4.regulator: Driver reg-fixed-voltage requests probe deferral
-vdd_hdmi_5v0: 5000 mV 
-reg-fixed-voltage 5.regulator: Failed to find supply vin
-reg-fixed-voltage 5.regulator: Failed to register regulator: -517
-platform 5.regulator: Driver reg-fixed-voltage requests probe deferral
-mmc1: BKOPS_EN bit is not set
-platform 6.regulator: Driver reg-fixed-voltage requests probe deferral
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
-platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
-mmc1: new HS200 MMC card at address 0001
-isa bounce pool size: 16 pages
-mmcblk0: mmc1:0001 SEM32G 29.1 GiB 
-mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
-mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
-mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
-Primary GPT is invalid, using alternate GPT.
- mmcblk0: p1 p2 p3 p4 p5
- mmcblk0boot1: unknown partition table
- mmcblk0boot0: unknown partition table
-usb1_vbus: 5000 mV 
-reg-fixed-voltage 3.regulator: Failed to find supply vin
-reg-fixed-voltage 3.regulator: Failed to register regulator: -517
-platform 3.regulator: Driver reg-fixed-voltage requests probe deferral
-usb2_vbus: 5000 mV 
-reg-fixed-voltage 4.regulator: Failed to find supply vin
-reg-fixed-voltage 4.regulator: Failed to register regulator: -517
-platform 4.regulator: Driver reg-fixed-voltage requests probe deferral
-vdd_hdmi_5v0: 5000 mV 
-reg-fixed-voltage 5.regulator: Failed to find supply vin
-reg-fixed-voltage 5.regulator: Failed to register regulator: -517
-platform 5.regulator: Driver reg-fixed-voltage requests probe deferral
-platform 6.regulator: Driver reg-fixed-voltage requests probe deferral
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
-tegra_rtc 7000e000.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14)
-EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
-EXT4-fs (mmcblk0p1): recovery complete
-EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext3 filesystem) on device 179:1.
-devtmpfs: mounted
-Freeing unused kernel memory: 472K (c0649000 - c06bf000)
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-I have no name!@(none):/# 
\ No newline at end of file
Diff for ./tegra114-dalmore-headless/tegra114-dalmore/tegra_defconfig_log.txt
--- /tmp/fooa	2014-02-27 02:31:13.507783789 -0800
+++ /tmp/foob	1969-12-31 16:00:00.000000000 -0800
@@ -1,372 +0,0 @@
-
-
-U-Boot 2011.03 (Jun 11 2013 - 06:07:37)
-
-T114
-Board: NVIDIA Dalmore
-DRAM:  2 GiB
-MMC:   Tegra2 SD/MMC: 0, Tegra2 SD/MMC: 1
-In:    serial
-Out:   serial
-Err:   serial
-Net:   Net Initialization Skipped
-No ethernet found.
-Hit any key to stop autoboot:  2  0 
-Dalmore #
-Dalmore #usb reset
-(Re)start USB...
-USB:   Register 10011 NbrPorts 1
-USB EHCI 1.10
-scanning bus for devices... 2 USB Device(s) found
-       scanning bus for storage devices... 0 Storage Device(s) found
-       scanning bus for ethernet devices... 1 Ethernet Device(s) found
-Dalmore #setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt init=/bin/bash'
-Dalmore #setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
-Dalmore #tftpboot 0x81000000 zImage.tegra_defconfig
-Waiting for Ethernet connection... done.
-Using asx0 device
-TFTP from server 192.168.100.1; our IP address is 192.168.100.100
-Filename 'zImage.tegra_defconfig'.
-Load address: 0x81000000
-Loading: *#################################################  2.8 MiB/s
-done
-Bytes transferred = 4142560 (3f35e0 hex)
-Dalmore #tftpboot 0x82000000 tegra114-dalmore.dtb
-Using asx0 device
-TFTP from server 192.168.100.1; our IP address is 192.168.100.100
-Filename 'tegra114-dalmore.dtb'.
-Load address: 0x82000000
-Loading: *#################################################  2.3 MiB/s
-done
-Bytes transferred = 29436 (72fc hex)
-Dalmore #bootz 0x81000000 - 0x82000000
-## Flattened Device Tree blob at 82000000
-   Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 81ff5000, end 81fff2fb ... OK
-
-Starting kernel ...
-
-Timer summary in microseconds:
-       Mark    Elapsed  Stage
-          0          0  awake
-  2,173,449  2,173,449  usb_start
-  6,176,624  4,003,175  eth_start
-  6,176,621         -3  tftp start
- 10,086,447  3,909,826  tftp done
- 12,188,766  2,102,319  start_kernel
-Uncompressing Linux... done, booting the kernel.
-Booting Linux on physical CPU 0x0
-Initializing cgroup subsys cpu
-Initializing cgroup subsys cpuacct
-Linux version 3.13.0-37659-gd8ec26d (pwalmsley@kaivo) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP PREEMPT Sun Jan 19 19:07:08 PST 2014
-CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
-CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
-Machine model: NVIDIA Tegra114 Dalmore evaluation board
-debug: ignoring loglevel setting.
-cma: CMA: reserved 16 MiB at ae800000
-Memory policy: Data cache writealloc
-On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c07e72c0, node_mem_map c0840000
-  Normal zone: 1520 pages used for memmap
-  Normal zone: 0 pages reserved
-  Normal zone: 194560 pages, LIFO batch:31
-  HighMem zone: 2574 pages used for memmap
-  HighMem zone: 329472 pages, LIFO batch:31
-Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 1
-PERCPU: Embedded 8 pages/cpu @c1858000 s9088 r8192 d15488 u32768
-pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
-pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
-Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
-Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt init=/bin/bash
-PID hash table entries: 4096 (order: 2, 16384 bytes)
-Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
-Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2053808K/2096128K available (5662K kernel code, 306K rwdata, 1844K rodata, 244K init, 347K bss, 42320K reserved, 1317888K highmem)
-Virtual kernel memory layout:
-    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
-    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
-    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
-    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
-    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
-    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc075ce54   (7508 kB)
-      .init : 0xc075d000 - 0xc079a380   ( 245 kB)
-      .data : 0xc079c000 - 0xc07e8a20   ( 307 kB)
-       .bss : 0xc07e8a2c - 0xc083f770   ( 348 kB)
-Preemptible hierarchical RCU implementation.
-NR_IRQS:16 nr_irqs:16 16
-sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
-Architected cp15 timer(s) running at 12.00MHz (virt).
-sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
-Switching to timer-based delay loop
-Console: colour dummy device 80x30
-Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000)
-pid_max: default: 32768 minimum: 301
-Mount-cache hash table entries: 512
-Initializing cgroup subsys debug
-Initializing cgroup subsys freezer
-CPU: Testing write buffer coherency: ok
-/cpus/cpu@0 missing clock-frequency property
-/cpus/cpu@1 missing clock-frequency property
-/cpus/cpu@2 missing clock-frequency property
-/cpus/cpu@3 missing clock-frequency property
-CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x8055f008 - 0x8055f0a0
-CPU1: Booted secondary processor
-CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
-CPU2: Booted secondary processor
-CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
-CPU3: Booted secondary processor
-CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
-Brought up 4 CPUs
-SMP: Total of 4 processors activated.
-CPU: All CPU(s) started in SVC mode.
-devtmpfs: initialized
-VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
-pinctrl core: initialized pinctrl subsystem
-regulator-dummy: no parameters
-NET: Registered protocol family 16
-DMA: preallocated 256 KiB pool for atomic coherent allocations
-cpuidle: using governor ladder
-cpuidle: using governor menu
-No ATAGs?
-hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
-hw-breakpoint: maximum watchpoint size is 8 bytes.
-bio: create slab <bio-0> at 0
-vdd_ac_bat: 5000 mV 
-dvdd_ts: Failed to request enable GPIO61: -517
-reg-fixed-voltage 1.regulator: Failed to register regulator: -517
-platform 1.regulator: Driver reg-fixed-voltage requests probe deferral
-lcd_bl_en: Failed to request enable GPIO58: -517
-reg-fixed-voltage 2.regulator: Failed to register regulator: -517
-platform 2.regulator: Driver reg-fixed-voltage requests probe deferral
-usb1_vbus: Failed to request enable GPIO108: -517
-reg-fixed-voltage 3.regulator: Failed to register regulator: -517
-platform 3.regulator: Driver reg-fixed-voltage requests probe deferral
-usb2_vbus: Failed to request enable GPIO86: -517
-reg-fixed-voltage 4.regulator: Failed to register regulator: -517
-platform 4.regulator: Driver reg-fixed-voltage requests probe deferral
-vdd_hdmi_5v0: Failed to request enable GPIO81: -517
-reg-fixed-voltage 5.regulator: Failed to register regulator: -517
-platform 5.regulator: Driver reg-fixed-voltage requests probe deferral
-platform 6.regulator: Driver reg-fixed-voltage requests probe deferral
-vgaarb: loaded
-SCSI subsystem initialized
-usbcore: registered new interface driver usbfs
-usbcore: registered new interface driver hub
-usbcore: registered new device driver usb
-vdd-cpu: 500 <--> 1520 mV at 1100 mV 
-tps65090 1-0048: No cache defaults, reading back from HW
-vdd-sys-5v0: no parameters
-vdd-sys-5v0: supplied by vdd_ac_bat
-vdd-sys-3v3: no parameters
-vdd-sys-3v3: supplied by vdd_ac_bat
-vdd-ao: no parameters
-vdd-ao: supplied by vdd_ac_bat
-vdd-lcd-bl: no parameters
-vdd-lcd-bl: supplied by vdd_ac_bat
-TPS65090_RAILSFET2: no parameters
-TPS65090_RAILSFET2: supplied by vdd_ac_bat
-vdd-modem-3v3: no parameters
-vdd-modem-3v3: supplied by vdd-sys-3v3
-avdd-lcd: no parameters
-avdd-lcd: supplied by vdd-sys-3v3
-vdd-lvds: no parameters
-vdd-lvds: supplied by vdd-sys-3v3
-vdd-sd-slot: no parameters
-vdd-sd-slot: supplied by vdd-sys-3v3
-vdd-com-3v3: no parameters
-vdd-com-3v3: supplied by vdd-sys-3v3
-vdd-sby-5v0: no parameters
-vdd-sby-5v0: supplied by vdd_ac_bat
-vdd-sby-3v3: no parameters
-vdd-sby-3v3: supplied by vdd_ac_bat
-genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0xf0)
-palmas 1-0058: Irq flag is 0x00000000
-palmas 1-0058: Muxing GPIO ff, PWM 0, LED 0
-vddio-ddr: 1350 mV 
-vddio-ddr: supplied by vdd-ao
-vddio-1v8: 1800 mV 
-vddio-1v8: supplied by vdd-ao
-vdd-core: 900 <--> 1400 mV at 1100 mV 
-vdd-core: supplied by vdd-sys-3v3
-SMPS6: no parameters
-avdd-pll: 1050 mV 
-avdd-pll: supplied by vdd-sys-3v3
-sdhci-vdd-sd-slot: 2800 mV 
-sdhci-vdd-sd-slot: supplied by vdd-sys-3v3
-SMPS10_OUT2: at 5000 mV 
-SMPS10_OUT1: at 5000 mV 
-avdd-cam1: 2800 mV 
-avdd-cam1: supplied by vdd-sys-3v3
-avdd-cam2: 2800 mV 
-avdd-cam2: supplied by vdd-sys-3v3
-avdd-dsi-csi: 1200 mV 
-avdd-dsi-csi: supplied by vddio-1v8
-vpp-fuse: 1800 mV 
-vpp-fuse: supplied by vdd-sys-3v3
-LDO5: at 1200 mV 
-LDO5: supplied by vdd_ac_bat
-vdd-sensor-2v85: 2850 mV 
-vdd-sensor-2v85: supplied by vdd-sys-3v3
-vdd-af-cam1: 2800 mV 
-vdd-af-cam1: supplied by vdd-sys-3v3
-vdd-rtc: 900 mV 
-vdd-rtc: supplied by vdd-ao
-vddio-sdmmc-2: 1800 <--> 3300 mV at 3300 mV 
-vddio-sdmmc-2: supplied by sdhci-vdd-sd-slot
-hvdd-usb: 3300 mV 
-hvdd-usb: supplied by vdd-sys-5v0
-avdd-usb: 3300 mV 
-avdd-usb: supplied by vdd-sys-5v0
-rail-3v3: no parameters
-rail-5v0: no parameters
-REGEN3: no parameters
-SYSEN1: no parameters
-SYSEN2: no parameters
-Linux video capture interface: v2.00
-platform 70019010.iommu: Driver tegra-smmu requests probe deferral
-Advanced Linux Sound Architecture Driver Initialized.
-Bluetooth: Core ver 2.17
-NET: Registered protocol family 31
-Bluetooth: HCI device and connection manager initialized
-Bluetooth: HCI socket layer initialized
-Bluetooth: L2CAP socket layer initialized
-Bluetooth: SCO socket layer initialized
-cfg80211: Calling CRDA to update world regulatory domain
-Switched to clocksource arch_sys_counter
-NET: Registered protocol family 2
-TCP established hash table entries: 8192 (order: 3, 32768 bytes)
-TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
-TCP: Hash tables configured (established 8192 bind 8192)
-TCP: reno registered
-UDP hash table entries: 512 (order: 2, 16384 bytes)
-UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
-NET: Registered protocol family 1
-RPC: Registered named UNIX socket transport module.
-RPC: Registered udp transport module.
-RPC: Registered tcp transport module.
-RPC: Registered tcp NFSv4.1 backchannel transport module.
-PCI: CLS 0 bytes, default 64
-bounce pool size: 64 pages
-squashfs: version 4.0 (2009/01/31) Phillip Lougher
-msgmni has been set to 1469
-io scheduler noop registered (default)
-tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
-Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
-70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122, base_baud = 25500000) is a Tegra
-console [ttyS0] enabled
-[drm] Initialized drm 1.1.0 20060810
-loop: module loaded
-m25p80 spi32766.0: w25q32dw (4096 Kbytes)
-pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
-usbcore: registered new interface driver pegasus
-usbcore: registered new interface driver asix
-usbcore: registered new interface driver ax88179_178a
-usbcore: registered new interface driver cdc_ether
-usbcore: registered new interface driver r815x
-usbcore: registered new interface driver smsc75xx
-usbcore: registered new interface driver smsc95xx
-usbcore: registered new interface driver net1080
-usbcore: registered new interface driver cdc_subset
-usbcore: registered new interface driver zaurus
-usbcore: registered new interface driver cdc_ncm
-ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
-ehci-pci: EHCI PCI platform driver
-tegra-ehci: Tegra EHCI driver
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
-usbcore: registered new interface driver cdc_acm
-cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
-usbcore: registered new interface driver cdc_wdm
-usbcore: registered new interface driver usb-storage
-platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral
-mousedev: PS/2 mouse device common for all mice
-palmas-rtc rtc.7: rtc core: registered rtc.7 as rtc0
-tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
-tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
-sbs-battery 0-000b: sbs_probe: Failed to get device status
-sbs-battery: probe of 0-000b failed with error -121
-sdhci: Secure Digital Host Controller Interface driver
-sdhci: Copyright(c) Pierre Ossman
-sdhci-pltfm: SDHCI platform and OF driver helper
-sdhci-tegra 78000400.sdhci: Got CD GPIO #170.
-sdhci-tegra 78000400.sdhci: dummy supplies not allowed
-mmc0: no vqmmc regulator found
-sdhci-tegra 78000400.sdhci: dummy supplies not allowed
-mmc0: no vmmc regulator found
-mmc0: Invalid maximum block size, assuming 512 bytes
-mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA
-sdhci-tegra 78000600.sdhci: dummy supplies not allowed
-mmc1: no vqmmc regulator found
-sdhci-tegra 78000600.sdhci: dummy supplies not allowed
-mmc1: no vmmc regulator found
-mmc1: Invalid maximum block size, assuming 512 bytes
-mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
-usbcore: registered new interface driver usbhid
-usbhid: USB HID core driver
-mmc1: BKOPS_EN bit is not set
-mmc1: new HS200 MMC card at address 0001
-isa bounce pool size: 16 pages
-mmcblk0: mmc1:0001 SEM32G 29.1 GiB 
-mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB
-mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB
-mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB
-Primary GPT is invalid, using alternate GPT.
- mmcblk0: p1 p2 p3 p4 p5
- mmcblk0boot1: unknown partition table
- mmcblk0boot0: unknown partition table
-tegra-snd-rt5640 sound.4: rt5640-aif1 <-> 70080400.i2s mapping ok
-input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.4/sound/card0/input0
-TCP: cubic registered
-NET: Registered protocol family 10
-mip6: Mobile IPv6
-sit: IPv6 over IPv4 tunneling driver
-NET: Registered protocol family 17
-NET: Registered protocol family 15
-Bluetooth: RFCOMM socket layer initialized
-Bluetooth: RFCOMM ver 1.11
-Bluetooth: BNEP (Ethernet Emulation) ver 1.3
-Bluetooth: BNEP socket layer initialized
-Bluetooth: HIDP (Human Interface Emulation) ver 1.2
-Bluetooth: HIDP socket layer initialized
-Registering SWP/SWPB emulation handler
-hvdd-usb: disabling
-vdd-af-cam1: disabling
-LDO5: disabling
-vpp-fuse: disabling
-avdd-cam2: disabling
-avdd-cam1: disabling
-vdd-com-3v3: disabling
-vdd-lvds: disabling
-avdd-lcd: disabling
-vdd-lcd-bl: disabling
-dvdd_ts: 1800 mV 
-lcd_bl_en: 5000 mV 
-usb1_vbus: 5000 mV 
-usb1_vbus: supplied by vdd-sys-5v0
-usb2_vbus: 5000 mV 
-usb2_vbus: supplied by vdd-sys-5v0
-vdd_hdmi_5v0: 5000 mV 
-vdd_hdmi_5v0: supplied by vdd-sys-5v0
-vdd_cam_1v8_reg: 1800 mV 
-platform 7d008000.usb: Driver tegra-ehci requests probe deferral
-tegra-ehci 7d008000.usb: EHCI Host Controller
-tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
-tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
-input: gpio-keys.2 as /devices/soc0/gpio-keys.2/input/input1
-palmas-rtc rtc.7: setting system clock to 2000-04-15 05:34:49 UTC (955776889)
-ALSA device list:
-  #0: NVIDIA Tegra Dalmore
-kjournald starting.  Commit interval 5 seconds
-EXT3-fs (mmcblk0p1): using internal journal
-EXT3-fs (mmcblk0p1): recovery complete
-EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
-VFS: Mounted root (ext3 filesystem) on device 179:1.
-devtmpfs: mounted
-Freeing unused kernel memory: 244K (c075d000 - c079a000)
-bash: cannot set terminal process group (-1): Inappropriate ioctl for device
-bash: no job control in this shell
-I have no name!@(none):/# [    2.870734] usb 1-1: new high-speed USB device number 2 using tegra-ehci
Diff for ./tegra30-beaver/tegra30-beaver/multi_v7_defconfig_log.txt
--- /tmp/fooa	2014-02-27 02:31:13.515783794 -0800
+++ /tmp/foob	2014-02-27 02:31:13.519783798 -0800
@@ -1,53 +1,71 @@
 
-U-Boot SPL 2013.04-rc2-06423-gf2e8a87-dirty (May 15 2013 - 09:45:39)
+U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18)
 
 
-U-Boot 2013.04-rc2-06423-gf2e8a87-dirty (May 15 2013 - 09:45:39)
+U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18)
 
 TEGRA30
 Board: NVIDIA Beaver
+I2C:   ready
 DRAM:  2 GiB
 MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
-*** Warning - bad CRC, using default environment
-
 In:    serial
 Out:   serial
 Err:   serial
+Net:   Net Initialization Skipped
+No ethernet found.
 Hit any key to stop autoboot:  2  0 
 Tegra30 (Beaver) # 
-Tegra30 (Beaver) # setenv bootargs 'console=ttyS0,230400n8 noinitrd root=/dev/mmcblk0p1 rw rootwait gpt ignore_loglevel debug'
-Tegra30 (Beaver) # loady 0x81000000
-## Ready for binary (ymodem) download to 0x81000000 at 230400 bps...
-CSending: zImage
-Sending: 
-
-Transfer complete
-yzModem - CRC mode, 9(SOH)/3564(STX)/0(CAN) packets, 3 retries
-## Total Size      = 0x0037b358 = 3650392 Bytes
-Tegra30 (Beaver) # loady 0x82000000
-## Ready for binary (ymodem) download to 0x82000000 at 230400 bps...
-CSending: tegra30-beaver.dtb
-Sending: 
-
-Transfer complete
-yzModem - CRC mode, 6(SOH)/20(STX)/0(CAN) packets, 3 retries
-## Total Size      = 0x000051b8 = 20920 Bytes
+Tegra30 (Beaver) # usb reset
+(Re)start USB...
+USB0:   USB EHCI 1.00
+scanning bus 0 for devices... 2 USB Device(s) found
+       scanning usb for storage devices... 0 Storage Device(s) found
+       scanning usb for ethernet devices... 
+Warning: asx0 using MAC address from net device
+1 Ethernet Device(s) found
+Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd'
+Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra30 (Beaver) # tftpboot 0x81000000 zImage.multi_v7_defconfig
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.101
+Filename 'zImage.multi_v7_defconfig'.
+Load address: 0x81000000
+Loading: *#################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 ###############################################
+	 3.6 MiB/s
+done
+Bytes transferred = 4497344 (449fc0 hex)
+Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.101
+Filename 'tegra30-beaver.dtb'.
+Load address: 0x82000000
+Loading: *##
+	 2.8 MiB/s
+done
+Bytes transferred = 23808 (5d00 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
+Kernel image @ 0x81000000 [ 0x000000 - 0x449fc0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff7000, end 8ffff1b7 ... OK
+   Loading Device Tree to 8fff7000, end 8ffffcff ... OK
 
 Starting kernel ...
 
 Booting Linux on physical CPU 0x0
-Linux version 3.13.0-37659-gd8ec26d (pwalmsley@tamien) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Sun Jan 19 19:09:11 PST 2014
+Linux version 3.14.0-rc1-49026-g38dbfb5 (pwalmsley@kaivo) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP Thu Feb 27 02:22:57 PST 2014
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
 debug: ignoring loglevel setting.
+cma: CMA: reserved 16 MiB at ae800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c0752700, node_mem_map c079b000
+free_area_init_node: node 0, pgdat c092ba80, node_mem_map ed7f1000
   DMA zone: 1520 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 194560 pages, LIFO batch:31
@@ -58,36 +76,37 @@
 Tegra Revision: A03 SKU: 128 CPU Process: 4 Core Process: 0
 L310 cache controller enabled
 l2x0: 8 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e480001, Cache size: 1024 kB
-PERCPU: Embedded 5 pages/cpu @c17ae000 s6976 r0 d13504 u32768
-pcpu-alloc: s6976 r0 d13504 u32768 alloc=8*4096
+PERCPU: Embedded 7 pages/cpu @ed7bd000 s8192 r8192 d12288 u32768
+pcpu-alloc: s8192 r8192 d12288 u32768 alloc=8*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
-Kernel command line: console=ttyS0,230400n8 noinitrd root=/dev/mmcblk0p1 rw rootwait gpt ignore_loglevel debug
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2070960K/2096128K available (4980K kernel code, 589K rwdata, 1420K rodata, 474K init, 284K bss, 25168K reserved, 1317888K highmem)
+Memory: 2052640K/2096128K available (5839K kernel code, 677K rwdata, 2336K rodata, 508K init, 284K bss, 43488K reserved, 1317888K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
-      .text : 0xc0008000 - 0xc0648308   (6401 kB)
-      .init : 0xc0649000 - 0xc06bfb40   ( 475 kB)
-      .data : 0xc06c0000 - 0xc0753500   ( 590 kB)
-       .bss : 0xc0753508 - 0xc079a80c   ( 285 kB)
+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
+      .text : 0xc0008000 - 0xc0803e74   (8176 kB)
+      .init : 0xc0804000 - 0xc0883000   ( 508 kB)
+      .data : 0xc0884000 - 0xc092d600   ( 678 kB)
+       .bss : 0xc092d608 - 0xc0974740   ( 285 kB)
 SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 Hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
 Console: colour dummy device 80x30
-Calibrating delay loop... 2793.47 BogoMIPS (lpj=13967360)
+Calibrating delay loop... 2786.91 BogoMIPS (lpj=13934592)
 pid_max: default: 32768 minimum: 301
 Mount-cache hash table entries: 512
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x804b6e98 - 0x804b6f30
+Setting up static identity map for 0x805849c8 - 0x80584a60
 unable to find compatible sirf rstc node in dtb
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
@@ -104,6 +123,9 @@
 regulator-dummy: no parameters
 NET: Registered protocol family 16
 DMA: preallocated 256 KiB pool for atomic coherent allocations
+cpuidle: using governor ladder
+cpuidle: using governor menu
+No ATAGs?
 Serial: AMBA PL011 UART driver
 bio: create slab <bio-0> at 0
 edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
@@ -122,16 +144,41 @@
 reg-fixed-voltage 7.regulator: Failed to find supply vin
 reg-fixed-voltage 7.regulator: Failed to register regulator: -517
 platform 7.regulator: Driver reg-fixed-voltage requests probe deferral
+vgaarb: loaded
 SCSI subsystem initialized
 libata version 3.00 loaded.
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
+vdd_1v8_gen: 1800 mV 
+vdd_1v8_gen: supplied by vdd_5v_in
+vddio_ddr_1v2: 1200 mV 
+vddio_ddr_1v2: supplied by vdd_5v_in
+vdd_1v5_gen: 1500 mV 
+vdd_1v5_gen: supplied by vdd_5v_in
+vdd_cpu,vdd_sys: 1000 mV 
+vdd_pexa,vdd_pexb: 1050 mV 
+vdd_pexa,vdd_pexb: supplied by vdd_1v5_gen
+vdd_sata,avdd_plle: 1050 mV 
+vdd_sata,avdd_plle: supplied by vdd_1v5_gen
+vdd_rtc: 1200 mV 
+vdd_rtc: supplied by vdd_5v_in
+vddio_sdmmc,avdd_vdac: 3300 mV 
+vddio_sdmmc,avdd_vdac: supplied by vdd_5v_in
+avdd_dsi_csi,pwrdet_mipi: 1200 mV 
+avdd_dsi_csi,pwrdet_mipi: supplied by vdd_1v8_gen
+vdd_pllm,x,u,a_p_c_s: 1200 mV 
+vdd_pllm,x,u,a_p_c_s: supplied by vdd_1v8_gen
+vdd_ddr_hs: 1000 mV 
+vdd_ddr_hs: supplied by vdd_1v8_gen
 tps62361-vout: 500 <--> 1500 mV at 1160 mV 
+Linux video capture interface: v2.00
 pps_core: LinuxPPS API ver. 1 registered
 pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 PTP clock support registered
 EDAC MC: Ver: 3.0.0
+platform 7000f010.iommu: Driver tegra-smmu requests probe deferral
+Advanced Linux Sound Architecture Driver Initialized.
 Switched to clocksource timer_us
 NET: Registered protocol family 2
 TCP established hash table entries: 8192 (order: 3, 32768 bytes)
@@ -145,85 +192,76 @@
 RPC: Registered udp transport module.
 RPC: Registered tcp transport module.
 RPC: Registered tcp NFSv4.1 backchannel transport module.
+PCI: CLS 0 bytes, default 64
+futex hash table entries: 1024 (order: 4, 65536 bytes)
 bounce pool size: 64 pages
+squashfs: version 4.0 (2009/01/31) Phillip Lougher
 NFS: Registering the id_resolver key type
 Key type id_resolver registered
 Key type id_legacy registered
-Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
+msgmni has been set to 1467
+Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
 io scheduler noop registered
 io scheduler deadline registered
 io scheduler cfq registered (default)
+platform 3000.pcie-controller: Driver tegra-pcie requests probe deferral
 tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels
 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
 Serial: IMX driver
 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 68, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
+STMicroelectronics ASC driver initialized
 serial: Freescale lpuart driver
 [drm] Initialized drm 1.1.0 20060810
+tegra-dc 54200000.dc: missing "nvidia,head" property
+tegra-dc 54240000.dc: missing "nvidia,head" property
 tegra-hdmi 54280000.hdmi: failed to get VDD regulator
 platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+loop: module loaded
+m25p80 spi32766.1: w25q32 (4096 Kbytes)
+pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
+usbcore: registered new interface driver pegasus
+usbcore: registered new interface driver asix
+usbcore: registered new interface driver ax88179_178a
+usbcore: registered new interface driver cdc_ether
+usbcore: registered new interface driver r815x
+usbcore: registered new interface driver smsc75xx
+usbcore: registered new interface driver smsc95xx
+usbcore: registered new interface driver net1080
+usbcore: registered new interface driver cdc_subset
+usbcore: registered new interface driver zaurus
+usbcore: registered new interface driver cdc_ncm
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+ehci-pci: EHCI PCI platform driver
 ehci-platform: EHCI generic platform driver
 ehci-omap: OMAP-EHCI Host Controller driver
 ehci-orion: EHCI orion driver
 SPEAr-ehci: EHCI SPEAr driver
 tegra-ehci: Tegra EHCI driver
+platform 7d004000.usb: Driver tegra-ehci requests probe deferral
 platform 7d008000.usb: Driver tegra-ehci requests probe deferral
 usbcore: registered new interface driver usb-storage
+platform 7d004000.usb-phy: Driver tegra-phy requests probe deferral
 mousedev: PS/2 mouse device common for all mice
-tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc0
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
+tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
+i2c /dev entries driver
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
 sdhci-tegra 78000000.sdhci: Got CD GPIO #69.
 sdhci-tegra 78000000.sdhci: Got WP GPIO #155.
-sdhci-tegra 78000000.sdhci: dummy supplies not allowed
 mmc0: no vqmmc regulator found
-sdhci-tegra 78000000.sdhci: dummy supplies not allowed
 mmc0: no vmmc regulator found
 mmc0: Invalid maximum block size, assuming 512 bytes
 mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA
-sdhci-tegra 78000600.sdhci: dummy supplies not allowed
 mmc1: no vqmmc regulator found
-sdhci-tegra 78000600.sdhci: dummy supplies not allowed
 mmc1: no vmmc regulator found
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
 usbcore: registered new interface driver usbhid
 usbhid: USB HID core driver
-TCP: cubic registered
-NET: Registered protocol family 10
-sit: IPv6 over IPv4 tunneling driver
-Key type dns_resolver registered
-Registering SWP/SWPB emulation handler
-platform 1.regulator: Driver reg-fixed-voltage requests probe deferral
-platform 2.regulator: Driver reg-fixed-voltage requests probe deferral
-platform 6.regulator: Driver reg-fixed-voltage requests probe deferral
-sys_3v3_pexs: 3300 mV 
-reg-fixed-voltage 7.regulator: Failed to find supply vin
-reg-fixed-voltage 7.regulator: Failed to register regulator: -517
-platform 7.regulator: Driver reg-fixed-voltage requests probe deferral
-tegra-hdmi 54280000.hdmi: failed to get VDD regulator
-platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
-utmi_phy_clk_enable: timeout waiting for phy to stabilize
-tegra-ehci 7d008000.usb: EHCI Host Controller
-tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
-tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
-tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 1 port detected
-platform 1.regulator: Driver reg-fixed-voltage requests probe deferral
-platform 2.regulator: Driver reg-fixed-voltage requests probe deferral
-platform 6.regulator: Driver reg-fixed-voltage requests probe deferral
-sys_3v3_pexs: 3300 mV 
-reg-fixed-voltage 7.regulator: Failed to find supply vin
-reg-fixed-voltage 7.regulator: Failed to register regulator: -517
-platform 7.regulator: Driver reg-fixed-voltage requests probe deferral
-tegra-hdmi 54280000.hdmi: failed to get VDD regulator
-platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
-tegra_rtc 7000e000.rtc: setting system clock to 1970-01-01 00:03:10 UTC (190)
-Waiting for root device /dev/mmcblk0p1...
 mmc1: new high speed MMC card at address 0001
 isa bounce pool size: 16 pages
 mmcblk0: mmc1:0001 SEM16G 14.8 GiB 
@@ -234,52 +272,91 @@
  mmcblk0: p1 p2 p3 p4 p5
  mmcblk0boot1: unknown partition table
  mmcblk0boot0: unknown partition table
-platform 1.regulator: Driver reg-fixed-voltage requests probe deferral
-platform 2.regulator: Driver reg-fixed-voltage requests probe deferral
-platform 6.regulator: Driver reg-fixed-voltage requests probe deferral
+tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
+tegra-snd-rt5640 sound.4: rt5640-aif1 <-> 70080400.i2s mapping ok
+input: NVIDIA Tegra Beaver Headphones as /devices/soc0/sound.4/sound/card0/input0
+TCP: cubic registered
+NET: Registered protocol family 17
+Key type dns_resolver registered
+Registering SWP/SWPB emulation handler
+vdd_sata,avdd_plle: disabling
+chargepump_5v: 5000 mV 
+vdd_ddr: 1500 mV 
+vdd_ddr: supplied by vdd_5v_in
+sys_3v3,vdd_3v3_alw: 3300 mV 
+sys_3v3,vdd_3v3_alw: supplied by vdd_5v_in
 sys_3v3_pexs: 3300 mV 
-reg-fixed-voltage 7.regulator: Failed to find supply vin
-reg-fixed-voltage 7.regulator: Failed to register regulator: -517
-platform 7.regulator: Driver reg-fixed-voltage requests probe deferral
-tegra-hdmi 54280000.hdmi: failed to get VDD regulator
-platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
+sys_3v3_pexs: supplied by sys_3v3,vdd_3v3_alw
+tegra-pcie 3000.pcie-controller: 2x3 configuration
+tegra-pcie 3000.pcie-controller: probing port 0, using 2 lanes
+tegra-pcie 3000.pcie-controller: probing port 2, using 2 lanes
+tegra-pcie 3000.pcie-controller: link 2 down, retrying
+tegra-pcie 3000.pcie-controller: link 2 down, retrying
+tegra-pcie 3000.pcie-controller: link 2 down, retrying
+tegra-pcie 3000.pcie-controller: link 2 down, ignoring
+tegra-pcie 3000.pcie-controller: PCI host bridge to bus 0000:00
+pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff]
+pci_bus 0000:00: root bus resource [mem 0x28000000-0x3fffffff pref]
+pci_bus 0000:00: root bus resource [bus 00-ff]
+pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
+pci 0000:00:01.0: [10de:0e1c] type 01 class 0x060400
+pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
+PCI: bus0: Fast back to back transfers disabled
+pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
+pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
+pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
+pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
+pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
+pci 0000:01:00.0: supports D1 D2
+pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
+PCI: bus1: Fast back to back transfers disabled
+pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
+pci 0000:00:01.0: BAR 9: assigned [mem 0x28000000-0x280fffff 64bit pref]
+pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
+pci 0000:01:00.0: BAR 4: assigned [mem 0x28000000-0x28003fff 64bit pref]
+pci 0000:01:00.0: BAR 2: assigned [mem 0x28004000-0x28004fff 64bit pref]
+pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
+pci 0000:00:01.0: PCI bridge to [bus 01]
+pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
+pci 0000:00:01.0:   bridge window [mem 0x28000000-0x280fffff 64bit pref]
+pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge
+r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
+PCI: enabling device 0000:01:00.0 (0140 -> 0143)
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf002e000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 472
+r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
+[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[drm] No driver support for vblank timestamp query.
+host1x drm: No connectors reported connected with modes
+[drm] Cannot find any crtc or sizes - going 1024x768
+Console: switching to colour frame buffer device 128x48
+host1x drm: fb0:  frame buffer device
+host1x drm: registered panic notifier
+[drm] Initialized tegra 0.0.0 20120330 on minor 0
+platform 7d004000.usb: Driver tegra-ehci requests probe deferral
+tegra-ehci 7d008000.usb: EHCI Host Controller
+tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
+tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
+tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 1 port detected
+tegra-ehci 7d004000.usb: EHCI Host Controller
+tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000
+tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
+spear_cpufreq: Invalid cpufreq_tbl
+ALSA device list:
+  #0: NVIDIA Tegra Beaver
 EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
+EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended
 EXT4-fs (mmcblk0p1): recovery complete
 EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 472K (c0649000 - c06bf000)
- 
-INIT: version 2.88 booting
-Using makefile-style concurrent boot in runlevel S.
-Starting the hotplug events dispatcher: udevd[    2.129196] udevd[158]: starting version 175
-[ ok .
-Synthesizing the initial hotplug events...[ ok done.
-Waiting for /dev to be fully populated...[ ok done.
-Activating swap...[ ok done.
-EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
-Cleaning up temporary files... /tmp[ ok .
-Activating lvm and md swap...[ ok done.
-Checking file systems...fsck from util-linux 2.20.1
-[ ok done.
-Mounting local filesystems...[ ok done.
-Activating swapfile swap...[ ok done.
-Cleaning up temporary files...[ ok .
-Setting kernel variables ...[ ok done.
-random: dd urandom read with 128 bits of entropy available
-Configuring network interfaces...[    4.868786] random: nonblocking pool is initialized
-[ ok done.
-Starting rpcbind daemon...[ ok .
-Starting NFS common utilities: statd idmapd[ ok .
-Cleaning up temporary files...[ ok .
-Starting network benchmark server[ ok .
-INIT: Entering runlevel: 2
-Using makefile-style concurrent boot in runlevel 2.
-Starting network benchmark server[FAIL failed!
-Starting rpcbind daemon...[....] Already running.[ ok .
-Starting NFS common utilities: statd idmapd[ ok .
-Starting system message bus: dbus[ ok .
-
-Debian GNU/Linux wheezy/sid armel ttyS0
-
-armel login: 
\ No newline at end of file
+Freeing unused kernel memory: 508K (c0804000 - c0883000)
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    4.522233] asix 1-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:68:6d
Diff for ./tegra30-beaver/tegra30-beaver/tegra_defconfig_log.txt
--- /tmp/fooa	2014-02-27 02:31:13.523783802 -0800
+++ /tmp/foob	2014-02-27 02:31:13.527783805 -0800
@@ -1,46 +1,66 @@
 
-U-Boot SPL 2013.04-rc2-06423-gf2e8a87-dirty (May 15 2013 - 09:45:39)
+U-Boot SPL 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18)
 
 
-U-Boot 2013.04-rc2-06423-gf2e8a87-dirty (May 15 2013 - 09:45:39)
+U-Boot 2014.01-00219-gc4d376f (Feb 18 2014 - 19:57:18)
 
 TEGRA30
 Board: NVIDIA Beaver
+I2C:   ready
 DRAM:  2 GiB
 MMC:   Tegra SD/MMC: 0, Tegra SD/MMC: 1
-*** Warning - bad CRC, using default environment
-
 In:    serial
 Out:   serial
 Err:   serial
+Net:   Net Initialization Skipped
+No ethernet found.
 Hit any key to stop autoboot:  2  0 
 Tegra30 (Beaver) # 
-Tegra30 (Beaver) # setenv bootargs 'console=ttyS0,230400n8 noinitrd root=/dev/mmcblk0p1 rw rootwait gpt ignore_loglevel debug'
-Tegra30 (Beaver) # loady 0x81000000
-## Ready for binary (ymodem) download to 0x81000000 at 230400 bps...
-CSending: zImage
-Sending: 
-
-Transfer complete
-odem - CRC mode, 6(SOH)/4045(STX)/0(CAN) packets, 3 retries
-## Total Size      = 0x003f35e0 = 4142560 Bytes
-Tegra30 (Beaver) # loady 0x82000000
-## Ready for binary (ymodem) download to 0x82000000 at 230400 bps...
-CSending: tegra30-beaver.dtb
-Sending: 
-
-Transfer complete
-Modem - CRC mode, 6(SOH)/20(STX)/0(CAN) packets, 3 retries
-## Total Size      = 0x000051b8 = 20920 Bytes
+Tegra30 (Beaver) # usb reset
+(Re)start USB...
+USB0:   USB EHCI 1.00
+scanning bus 0 for devices... 2 USB Device(s) found
+       scanning usb for storage devices... 0 Storage Device(s) found
+       scanning usb for ethernet devices... 
+Warning: asx0 using MAC address from net device
+1 Ethernet Device(s) found
+Tegra30 (Beaver) # setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd'
+Tegra30 (Beaver) # setenv ipaddr 192.168.100.101; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1
+Tegra30 (Beaver) # tftpboot 0x81000000 zImage.tegra_defconfig
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.101
+Filename 'zImage.tegra_defconfig'.
+Load address: 0x81000000
+Loading: *#################################################################
+	 #################################################################
+	 #################################################################
+	 #################################################################
+	 ############################
+	 3.1 MiB/s
+done
+Bytes transferred = 4227488 (4081a0 hex)
+Tegra30 (Beaver) # tftpboot 0x82000000 tegra30-beaver.dtb
+Using asx0 device
+TFTP from server 192.168.100.1; our IP address is 192.168.100.101
+Filename 'tegra30-beaver.dtb'.
+Load address: 0x82000000
+Loading: *##
+	 2.8 MiB/s
+done
+Bytes transferred = 23808 (5d00 hex)
 Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000
+Kernel image @ 0x81000000 [ 0x000000 - 0x4081a0 ]
 ## Flattened Device Tree blob at 82000000
    Booting using the fdt blob at 0x82000000
-   Loading Device Tree to 8fff7000, end 8ffff1b7 ... OK
+   Loading Device Tree to 8fff7000, end 8ffffcff ... OK
+
+Starting kernel ...
 
-Starting kernel .����怘�怘�f�Ξ���x��Ξ��~8�����f�����8x����f�8�Ξ��`Ξ��~8~��f8��x�f���怘�[    0.000000] Booting Linux on physical CPU 0x0
+Uncompressing Linux... done, booting the kernel.
+Booting Linux on physical CPU 0x0
 Initializing cgroup subsys cpu
 Initializing cgroup subsys cpuacct
-Linux version 3.13.0-37659-gd8ec26d (pwalmsley@kaivo) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP PREEMPT Sun Jan 19 19:07:08 PST 2014
+Linux version 3.14.0-rc1-49026-g38dbfb5 (pwalmsley@tamien) (gcc version 4.7.3 20130328 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) ) #1 SMP PREEMPT Thu Feb 27 02:23:37 PST 2014
 CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
 CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 Machine model: NVIDIA Tegra30 Beaver evaluation board
@@ -48,7 +68,7 @@
 cma: CMA: reserved 16 MiB at ae800000
 Memory policy: Data cache writealloc
 On node 0 totalpages: 524032
-free_area_init_node: node 0, pgdat c07e72c0, node_mem_map c0840000
+free_area_init_node: node 0, pgdat c0817bc0, node_mem_map ed7f0000
   Normal zone: 1520 pages used for memmap
   Normal zone: 0 pages reserved
   Normal zone: 194560 pages, LIFO batch:31
@@ -59,15 +79,15 @@
 Tegra Revision: A03 SKU: 128 CPU Process: 4 Core Process: 0
 L310 cache controller enabled
 l2x0: 8 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e480001, Cache size: 1024 kB
-PERCPU: Embedded 8 pages/cpu @c1853000 s9088 r8192 d15488 u32768
-pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
+PERCPU: Embedded 8 pages/cpu @ed7bc000 s9152 r8192 d15424 u32768
+pcpu-alloc: s9152 r8192 d15424 u32768 alloc=8*4096
 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
 Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522512
-Kernel command line: console=ttyS0,230400n8 noinitrd root=/dev/mmcblk0p1 rw rootwait gpt ignore_loglevel debug
+Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt debug init=/bin/bash noinitrd
 PID hash table entries: 4096 (order: 2, 16384 bytes)
 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 2053836K/2096128K available (5662K kernel code, 306K rwdata, 1844K rodata, 244K init, 347K bss, 42292K reserved, 1317888K highmem)
+Memory: 2053668K/2096128K available (5751K kernel code, 316K rwdata, 1936K rodata, 248K init, 340K bss, 42460K reserved, 1317888K highmem)
 Virtual kernel memory layout:
     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
@@ -75,22 +95,22 @@
     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
-      .text : 0xc0008000 - 0xc075ce54   (7508 kB)
-      .init : 0xc075d000 - 0xc079a380   ( 245 kB)
-      .data : 0xc079c000 - 0xc07e8a20   ( 307 kB)
-       .bss : 0xc07e8a2c - 0xc083f770   ( 348 kB)
+      .text : 0xc0008000 - 0xc078a00c   (7689 kB)
+      .init : 0xc078b000 - 0xc07c93c0   ( 249 kB)
+      .data : 0xc07ca000 - 0xc0819320   ( 317 kB)
+       .bss : 0xc081932c - 0xc086e698   ( 341 kB)
 Preemptible hierarchical RCU implementation.
 NR_IRQS:16 nr_irqs:16 16
 sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
 Console: colour dummy device 80x30
-Calibrating delay loop... 2793.47 BogoMIPS (lpj=13967360)
+Calibrating delay loop... 2786.91 BogoMIPS (lpj=13934592)
 pid_max: default: 32768 minimum: 301
 Mount-cache hash table entries: 512
 Initializing cgroup subsys debug
 Initializing cgroup subsys freezer
 CPU: Testing write buffer coherency: ok
 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
-Setting up static identity map for 0x8055f008 - 0x8055f0a0
+Setting up static identity map for 0x80573378 - 0x80573410
 CPU1: Booted secondary processor
 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 CPU2: Booted secondary processor
@@ -131,7 +151,6 @@
 usbcore: registered new interface driver usbfs
 usbcore: registered new interface driver hub
 usbcore: registered new device driver usb
-tps62361-vout: 500 <--> 1500 mV at 1160 mV 
 vdd_1v8_gen: 1800 mV 
 vdd_1v8_gen: supplied by vdd_5v_in
 vddio_ddr_1v2: 1200 mV 
@@ -153,10 +172,11 @@
 vdd_pllm,x,u,a_p_c_s: supplied by vdd_1v8_gen
 vdd_ddr_hs: 1000 mV 
 vdd_ddr_hs: supplied by vdd_1v8_gen
+tps62361-vout: 500 <--> 1500 mV at 1160 mV 
 Linux video capture interface: v2.00
 platform 7000f010.iommu: Driver tegra-smmu requests probe deferral
 Advanced Linux Sound Architecture Driver Initialized.
-Bluetooth: Core ver 2.17
+Bluetooth: Core ver 2.18
 NET: Registered protocol family 31
 Bluetooth: HCI device and connection manager initialized
 Bluetooth: HCI socket layer initialized
@@ -178,6 +198,7 @@
 RPC: Registered tcp NFSv4.1 backchannel transport module.
 PCI: CLS 0 bytes, default 64
 hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
+futex hash table entries: 1024 (order: 4, 65536 bytes)
 bounce pool size: 64 pages
 squashfs: version 4.0 (2009/01/31) Phillip Lougher
 msgmni has been set to 1469
@@ -188,6 +209,8 @@
 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 68, base_baud = 25500000) is a Tegra
 console [ttyS0] enabled
 [drm] Initialized drm 1.1.0 20060810
+tegra-dc 54200000.dc: missing "nvidia,head" property
+tegra-dc 54240000.dc: missing "nvidia,head" property
 tegra-hdmi 54280000.hdmi: failed to get VDD regulator
 platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
 loop: module loaded
@@ -207,29 +230,27 @@
 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 ehci-pci: EHCI PCI platform driver
 tegra-ehci: Tegra EHCI driver
+platform 7d004000.usb: Driver tegra-ehci requests probe deferral
 platform 7d008000.usb: Driver tegra-ehci requests probe deferral
 usbcore: registered new interface driver cdc_acm
 cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 usbcore: registered new interface driver cdc_wdm
 usbcore: registered new interface driver usb-storage
+platform 7d004000.usb-phy: Driver tegra-phy requests probe deferral
 mousedev: PS/2 mouse device common for all mice
-tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc0
+tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
 tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
-tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc1
+tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
 sdhci: Secure Digital Host Controller Interface driver
 sdhci: Copyright(c) Pierre Ossman
 sdhci-pltfm: SDHCI platform and OF driver helper
 sdhci-tegra 78000000.sdhci: Got CD GPIO #69.
 sdhci-tegra 78000000.sdhci: Got WP GPIO #155.
-sdhci-tegra 78000000.sdhci: dummy supplies not allowed
 mmc0: no vqmmc regulator found
-sdhci-tegra 78000000.sdhci: dummy supplies not allowed
 mmc0: no vmmc regulator found
 mmc0: Invalid maximum block size, assuming 512 bytes
 mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA
-sdhci-tegra 78000600.sdhci: dummy supplies not allowed
 mmc1: no vqmmc regulator found
-sdhci-tegra 78000600.sdhci: dummy supplies not allowed
 mmc1: no vmmc regulator found
 mmc1: Invalid maximum block size, assuming 512 bytes
 mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA
@@ -245,6 +266,7 @@
  mmcblk0: p1 p2 p3 p4 p5
  mmcblk0boot1: unknown partition table
  mmcblk0boot0: unknown partition table
+tegra30-i2s 70080400.i2s: DMA channels sourced from device 70080000.ahub
 tegra-snd-rt5640 sound.4: rt5640-aif1 <-> 70080400.i2s mapping ok
 input: NVIDIA Tegra Beaver Headphones as /devices/soc0/sound.4/sound/card0/input0
 TCP: cubic registered
@@ -306,7 +328,7 @@
 pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
 PCI: enabling device 0000:01:00.0 (0140 -> 0143)
-r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf0022000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 473
+r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf002e000, 02:04:4b:01:60:a6, XID 0c900800 IRQ 473
 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [drm] No driver support for vblank timestamp query.
@@ -316,54 +338,31 @@
 host1x drm: fb0:  frame buffer device
 host1x drm: registered panic notifier
 [drm] Initialized tegra 0.0.0 20120330 on minor 0
-utmi_phy_clk_enable: timeout waiting for phy to stabilize
+platform 7d004000.usb: Driver tegra-ehci requests probe deferral
 tegra-ehci 7d008000.usb: EHCI Host Controller
 tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1
 tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000
 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00
 hub 1-0:1.0: USB hub found
 hub 1-0:1.0: 1 port detected
-tegra_rtc 7000e000.rtc: setting system clock to 1970-01-01 00:03:35 UTC (215)
+tegra-ehci 7d004000.usb: EHCI Host Controller
+tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 2
+tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000
+tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 1 port detected
+tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802)
 ALSA device list:
   #0: NVIDIA Tegra Beaver
 kjournald starting.  Commit interval 5 seconds
+EXT3-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended
 EXT3-fs (mmcblk0p1): using internal journal
 EXT3-fs (mmcblk0p1): recovery complete
 EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
 VFS: Mounted root (ext3 filesystem) on device 179:1.
 devtmpfs: mounted
-Freeing unused kernel memory: 244K (c075d000 - c079a000)
- 
-INIT: version 2.88 booting
-Using makefile-style concurrent boot in runlevel S.
-Starting the hotplug events dispatcher: udevd[    4.157502] udevd[178]: starting version 175
-[ ok .
-Synthesizing the initial hotplug events...[ ok done.
-Waiting for /dev to be fully populated...[ ok done.
-Activating swap...[ ok done.
-Cleaning up temporary files... /tmp[ ok .
-random: nonblocking pool is initialized
-Activating lvm and md swap...[ ok done.
-Checking file systems...fsck from util-linux 2.20.1
-[ ok done.
-Mounting local filesystems...[ ok done.
-Activating swapfile swap...[ ok done.
-Cleaning up temporary files...[ ok .
-Setting kernel variables ...[ ok done.
-Configuring network interfaces...[ ok done.
-Starting rpcbind daemon...[ ok .
-Starting NFS common utilities: statd idmapd[FAIL failed!
-Cleaning up temporary files...[ ok .
-Starting network benchmark server[ ok .
-startpar: service(s) returned failure: nfs-common ...[FAIL failed!
-INIT: Entering runlevel: 2
-Using makefile-style concurrent boot in runlevel 2.
-Starting network benchmark server[FAIL failed!
-Starting rpcbind daemon...[....] Already running.[ ok .
-Starting NFS common utilities: statd idmapd[FAIL failed!
-Starting system message bus: dbus[ ok .
-startpar: service(s) returned failure: nfs-common ...[FAIL failed!
-
-Debian GNU/Linux wheezy/sid armel ttyS0
-
-armel login: 
\ No newline at end of file
+Freeing unused kernel memory: 248K (c078b000 - c07c9000)
+usb 1-1: new high-speed USB device number 2 using tegra-ehci
+bash: cannot set terminal process group (-1): Inappropriate ioctl for device
+bash: no job control in this shell
+root@(none):/# [    4.780997] asix 1-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:0f:68:6d
