U-Boot SPL 2013.04-rc2-06423-gf2e8a87-dirty (May 15 2013 - 09:45:39) U-Boot 2013.04-rc2-06423-gf2e8a87-dirty (May 15 2013 - 09:45:39) TEGRA30 Board: NVIDIA Beaver DRAM: 2 GiB MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Hit any key to stop autoboot: 2  0 Tegra30 (Beaver) # Tegra30 (Beaver) # setenv bootargs 'console=ttyS0,230400n8 noinitrd root=/dev/mmcblk0p1 rw rootwait gpt ignore_loglevel debug' Tegra30 (Beaver) # loady 0x81000000 ## Ready for binary (ymodem) download to 0x81000000 at 230400 bps... CSending: zImage Sending: Transfer complete xyzModem - CRC mode, 9(SOH)/3883(STX)/0(CAN) packets, 3 retries ## Total Size = 0x003caf18 = 3976984 Bytes Tegra30 (Beaver) # loady 0x82000000 ## Ready for binary (ymodem) download to 0x82000000 at 230400 bps... CSending: tegra30-beaver.dtb Sending: Transfer complete yzModem - CRC mode, 2(SOH)/17(STX)/0(CAN) packets, 3 retries ## Total Size = 0x0000439d = 17309 Bytes Tegra30 (Beaver) # bootz 0x81000000 - 0x82000000 ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8fff8000, end 8ffff39c ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.11.6-12917-g5070441 (pwalmsley@kaivo) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 SMP Sun Oct 27 16:32:30 PDT 2013 [ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: NVIDIA Tegra SoC (Flattened Device Tree), model: NVIDIA Tegra30 Beaver evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c07b6a40, node_mem_map c07fe000 [ 0.000000] DMA zone: 1520 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2574 pages used for memmap [ 0.000000] HighMem zone: 329472 pages, LIFO batch:31 [ 0.000000] fuse_speedo_calib: ATE prog ver 3.3 [ 0.000000] Tegra30: CPU Speedo ID 5, Soc Speedo ID 2 [ 0.000000] Tegra Revision: A03 SKU: 128 CPU Process: 4 Core Process: 0 [ 0.000000] L310 cache controller enabled [ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e480001, Cache size: 1048576 B [ 0.000000] PERCPU: Embedded 5 pages/cpu @c1810000 s7168 r0 d13312 u32768 [ 0.000000] pcpu-alloc: s7168 r0 d13312 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522512 [ 0.000000] Kernel command line: console=ttyS0,230400n8 noinitrd root=/dev/mmcblk0p1 rw rootwait gpt ignore_loglevel debug [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2070572K/2096128K available (5387K kernel code, 584K rwdata, 1416K rodata, 479K init, 279K bss, 25556K reserved, 1317888K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] .text : 0xc0008000 - 0xc06ad094 (6805 kB) [ 0.000000] .init : 0xc06ae000 - 0xc0725c00 ( 479 kB) [ 0.000000] .data : 0xc0726000 - 0xc07b8180 ( 585 kB) [ 0.000000] .bss : 0xc07b8180 - 0xc07fde54 ( 280 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000476] Calibrating delay loop... 1397.55 BogoMIPS (lpj=6987776) [ 0.090023] pid_max: default: 32768 minimum: 301 [ 0.090126] Mount-cache hash table entries: 512 [ 0.092133] CPU: Testing write buffer coherency: ok [ 0.092393] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.092459] Setting up static identity map for 0xc051d540 - 0xc051d5d8 [ 0.092569] unable to find compatible sirf rstc node in dtb [ 0.093921] CPU1: Booted secondary processor [ 0.132442] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.133295] CPU2: Booted secondary processor [ 0.172441] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.173282] CPU3: Booted secondary processor [ 0.212442] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.212502] Brought up 4 CPUs [ 0.212517] SMP: Total of 4 processors activated (5590.22 BogoMIPS). [ 0.212524] CPU: All CPU(s) started in SVC mode. [ 0.213066] devtmpfs: initialized [ 0.215542] pinctrl core: initialized pinctrl subsystem [ 0.215775] regulator-dummy: no parameters [ 0.216020] NET: Registered protocol family 16 [ 0.217458] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.217574] unable to find compatible sirf pwrc node in dtb [ 0.224566] Serial: AMBA PL011 UART driver [ 0.227316] bio: create slab at 0 [ 0.228150] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 0.228168] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 0.228414] vdd_5v_in: 5000 mV [ 0.228479] platform 1.regulator: Driver reg-fixed-voltage requests probe deferral [ 0.228509] platform 2.regulator: Driver reg-fixed-voltage requests probe deferral [ 0.228585] vdd_5v_sata: 5000 mV [ 0.228604] vdd_5v_sata: supplied by vdd_5v_in [ 0.228726] usb1_vbus: 5000 mV [ 0.228743] usb1_vbus: supplied by vdd_5v_in [ 0.228861] usb3_vbus: 5000 mV [ 0.228893] usb3_vbus: supplied by vdd_5v_in [ 0.228958] platform 6.regulator: Driver reg-fixed-voltage requests probe deferral [ 0.229030] sys_3v3_pexs: 3300 mV [ 0.229050] reg-fixed-voltage 7.regulator: Failed to find supply vin [ 0.229098] reg-fixed-voltage 7.regulator: Failed to register regulator: -517 [ 0.229107] platform 7.regulator: Driver reg-fixed-voltage requests probe deferral [ 0.229831] vgaarb: loaded [ 0.230034] SCSI subsystem initialized [ 0.230135] libata version 3.00 loaded. [ 0.230248] usbcore: registered new interface driver usbfs [ 0.230274] usbcore: registered new interface driver hub [ 0.230329] usbcore: registered new device driver usb [ 0.232793] tps62361-vout: 500 <--> 1500 mV at 1160 mV [ 0.232952] pps_core: LinuxPPS API ver. 1 registered [ 0.232958] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.232969] PTP clock support registered [ 0.233011] EDAC MC: Ver: 3.0.0 [ 0.233641] Switched to clocksource timer_us [ 0.238424] NET: Registered protocol family 2 [ 0.238767] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.238853] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.238931] TCP: Hash tables configured (established 8192 bind 8192) [ 0.239004] TCP: reno registered [ 0.239017] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.239076] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.239295] NET: Registered protocol family 1 [ 0.239517] RPC: Registered named UNIX socket transport module. [ 0.239524] RPC: Registered udp transport module. [ 0.239528] RPC: Registered tcp transport module. [ 0.239531] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.239539] PCI: CLS 0 bytes, default 64 [ 0.241339] bounce pool size: 64 pages [ 0.245939] NFS: Registering the id_resolver key type [ 0.245980] Key type id_resolver registered [ 0.245985] Key type id_legacy registered [ 0.246114] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.246122] io scheduler noop registered [ 0.246127] io scheduler deadline registered [ 0.246209] io scheduler cfq registered (default) [ 0.248570] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 0.278200] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.279030] Serial: IMX driver [ 0.279571] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra [ 0.611481] console [ttyS0] enabled [ 0.613797] serial: Freescale lpuart driver [ 0.616041] [drm] Initialized drm 1.1.0 20060810 [ 0.619540] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.622858] [drm] No driver support for vblank timestamp query. [ 0.625853] tegra-host1x 50000000.host1x: No connectors reported connected with modes [ 0.629786] [drm] Cannot find any crtc or sizes - going 1024x768 [ 0.646827] Console: switching to colour frame buffer device 128x48 [ 0.656406] tegra-host1x 50000000.host1x: fb0: frame buffer device [ 0.659550] tegra-host1x 50000000.host1x: registered panic notifier [ 0.662697] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 0.667236] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.670510] ehci-pci: EHCI PCI platform driver [ 0.672755] ehci-platform: EHCI generic platform driver [ 0.675444] ehci-omap: OMAP-EHCI Host Controller driver [ 0.678107] ehci-orion: EHCI orion driver [ 0.680158] SPEAr-ehci: EHCI SPEAr driver [ 0.682211] tegra-ehci: Tegra EHCI driver [ 0.684437] usbcore: registered new interface driver usb-storage [ 0.688125] mousedev: PS/2 mouse device common for all mice [ 0.691313] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc0 [ 0.694914] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 0.698369] sdhci: Secure Digital Host Controller Interface driver [ 0.701467] sdhci: Copyright(c) Pierre Ossman [ 0.703840] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.706899] sdhci-tegra 78000000.sdhci: Got CD GPIO #69. [ 0.709574] sdhci-tegra 78000000.sdhci: Got WP GPIO #155. [ 0.713307] mmc0: no vqmmc regulator found [ 0.715375] mmc0: no vmmc regulator found [ 0.717386] mmc0: Invalid maximum block size, assuming 512 bytes [ 0.763647] mmc0: SDHCI controller on 78000000.sdhci [78000000.sdhci] using ADMA [ 0.768410] mmc1: no vqmmc regulator found [ 0.770464] mmc1: no vmmc regulator found [ 0.772474] mmc1: Invalid maximum block size, assuming 512 bytes [ 0.813645] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 0.817595] usbcore: registered new interface driver usbhid [ 0.820389] usbhid: USB HID core driver [ 0.822485] TCP: cubic registered [ 0.824464] NET: Registered protocol family 10 [ 0.827075] sit: IPv6 over IPv4 tunneling driver [ 0.829784] Key type dns_resolver registered [ 0.832868] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.836762] Registering SWP/SWPB emulation handler [ 0.839863] platform 1.regulator: Driver reg-fixed-voltage requests probe deferral [ 0.843894] platform 2.regulator: Driver reg-fixed-voltage requests probe deferral [ 0.847816] platform 6.regulator: Driver reg-fixed-voltage requests probe deferral [ 0.851808] sys_3v3_pexs: 3300 mV [ 0.853541] reg-fixed-voltage 7.regulator: Failed to find supply vin [ 0.856783] reg-fixed-voltage 7.regulator: Failed to register regulator: -517 [ 0.860368] platform 7.regulator: Driver reg-fixed-voltage requests probe deferral [ 0.864283] tegra_rtc 7000e000.rtc: setting system clock to 1970-01-01 00:03:26 UTC (206) [ 0.869089] Waiting for root device /dev/mmcblk0p1... [ 0.971944] mmc1: new high speed MMC card at address 0001 [ 0.974943] mmcblk0: mmc1:0001 SEM16G 14.8 GiB [ 0.977315] mmcblk0boot0: mmc1:0001 SEM16G partition 1 1.00 MiB [ 0.980375] mmcblk0boot1: mmc1:0001 SEM16G partition 2 1.00 MiB [ 0.983437] mmcblk0rpmb: mmc1:0001 SEM16G partition 3 128 KiB [ 0.990230] Primary GPT is invalid, using alternate GPT. [ 0.992913] mmcblk0: p1 p2 p3 p4 p5 [ 0.998283] mmcblk0boot1: unknown partition table [ 1.003482] mmcblk0boot0: unknown partition table [ 1.006157] platform 1.regulator: Driver reg-fixed-voltage requests probe deferral [ 1.010148] platform 2.regulator: Driver reg-fixed-voltage requests probe deferral [ 1.014101] platform 6.regulator: Driver reg-fixed-voltage requests probe deferral [ 1.018075] sys_3v3_pexs: 3300 mV [ 1.019808] reg-fixed-voltage 7.regulator: Failed to find supply vin [ 1.023038] reg-fixed-voltage 7.regulator: Failed to register regulator: -517 [ 1.026632] platform 7.regulator: Driver reg-fixed-voltage requests probe deferral [ 1.085509] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 1.263002] EXT4-fs (mmcblk0p1): recovery complete [ 1.266973] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.271073] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 1.278992] devtmpfs: mounted [ 1.280858] Freeing unused kernel memory: 476K (c06ae000 - c0725000) INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 2.136703] udevd[159]: starting version 175 [ ok . [....] Synthesizing the initial hotplug events...[ ok done. [....] Waiting for /dev to be fully populated...[ ok done. [....] Activating swap...[ ok done. [ 3.158517] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[ ok . [....] Activating lvm and md swap...[ ok done. [....] Checking file systems...fsck from util-linux 2.20.1 [ ok done. [....] Mounting local filesystems...[ ok done. [....] Activating swapfile swap...[ ok done. [....] Cleaning up temporary files...[ ok . [....] Setting kernel variables ...[ ok done. [....] Configuring network interfaces...[ ok done. [....] Starting rpcbind daemon...[ ok . [....] Starting NFS common utilities: statd idmapd[ ok . [....] Cleaning up temporary files...[ ok . [....] Starting network benchmark server[ ok . INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting network benchmark server[FAIL failed! [....] Starting rpcbind daemon...[....] Already running.[ ok . [....] Starting NFS common utilities: statd idmapd[ ok . [....] Starting system message bus: dbus[ ok . Debian GNU/Linux wheezy/sid armel ttyS0 armel login: