U-Boot 2011.03 (Jun 11 2013 - 06:07:37) T114 Board: NVIDIA Dalmore DRAM: 2 GiB MMC: Tegra2 SD/MMC: 0, Tegra2 SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Dalmore # Dalmore #usb reset (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.10 scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found scanning bus for ethernet devices... 1 Ethernet Device(s) found Dalmore #setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt init=/bin/bash' Dalmore #setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Dalmore #tftpboot 0x81000000 zImage.multi_v7_defconfig Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################# 2.8 MiB/s done Bytes transferred = 3938440 (3c1888 hex) Dalmore #tftpboot 0x82000000 tegra114-dalmore.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'tegra114-dalmore.dtb'. Load address: 0x82000000 Loading: *################################################# 2.5 MiB/s done Bytes transferred = 29073 (7191 hex) Dalmore #bootz 0x81000000 - 0x82000000 ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 81ff5000, end 81fff190 ... OK Starting kernel ... Timer summary in microseconds: Mark Elapsed Stage 0 0 awake 3,067,383 3,067,383 usb_start 7,071,442 4,004,059 eth_start 7,071,440 -2 tftp start 10,878,376 3,806,936 tftp done 13,082,649 2,204,273 start_kernel [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.12.0-rc6-23919-g31d141e (pwalmsley@kaivo) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 SMP Sat Oct 19 23:26:53 PDT 2013 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: NVIDIA Tegra SoC (Flattened Device Tree), model: NVIDIA Tegra114 Dalmore evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c07a2a40, node_mem_map c07ea000 [ 0.000000] DMA zone: 1520 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2574 pages used for memmap [ 0.000000] HighMem zone: 329472 pages, LIFO batch:31 [ 0.000000] Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 1 [ 0.000000] PERCPU: Embedded 5 pages/cpu @c1802000 s6976 r0 d13504 u32768 [ 0.000000] pcpu-alloc: s6976 r0 d13504 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522512 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2070616K/2096128K available (5332K kernel code, 590K rwdata, 1388K rodata, 474K init, 278K bss, 25512K reserved, 1317888K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] .text : 0xc0008000 - 0xc06984f4 (6722 kB) [ 0.000000] .init : 0xc0699000 - 0xc070fb40 ( 475 kB) [ 0.000000] .data : 0xc0710000 - 0xc07a3820 ( 591 kB) [ 0.000000] .bss : 0xc07a3828 - 0xc07e9074 ( 279 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms [ 0.000000] Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.000000] Switching to timer-based delay loop [ 0.000000] sched_clock: ARM arch timer >56 bits at 12000kHz, resolution 83ns [ 0.000000] Console: colour dummy device 80x30 [ 13.025886] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 13.025902] pid_max: default: 32768 minimum: 301 [ 13.026054] Mount-cache hash table entries: 512 [ 13.033867] CPU: Testing write buffer coherency: ok [ 13.034114] /cpus/cpu@0 missing clock-frequency property [ 13.034140] /cpus/cpu@1 missing clock-frequency property [ 13.034164] /cpus/cpu@2 missing clock-frequency property [ 13.034190] /cpus/cpu@3 missing clock-frequency property [ 13.034203] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 13.034230] Setting up static identity map for 0xc0510a78 - 0xc0510b10 [ 13.034442] unable to find compatible sirf rstc node in dtb [ 13.035663] CPU1: Booted secondary processor [ 13.035690] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 13.036223] CPU2: Booted secondary processor [ 13.036247] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 13.036760] CPU3: Booted secondary processor [ 13.036785] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 13.036871] Brought up 4 CPUs [ 13.036896] SMP: Total of 4 processors activated. [ 13.036904] CPU: All CPU(s) started in SVC mode. [ 13.037546] devtmpfs: initialized [ 13.042941] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 13.043132] pinctrl core: initialized pinctrl subsystem [ 13.043485] regulator-dummy: no parameters [ 13.043840] NET: Registered protocol family 16 [ 13.044071] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 13.054134] Serial: AMBA PL011 UART driver [ 13.059166] bio: create slab at 0 [ 13.060515] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 13.060537] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 13.060928] vdd_ac_bat: 5000 mV [ 13.061112] dvdd_ts: Failed to request enable GPIO61: -517 [ 13.061200] reg-fixed-voltage 1.regulator: Failed to register regulator: -517 [ 13.061219] platform 1.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.061335] lcd_bl_en: Failed to request enable GPIO58: -517 [ 13.061411] reg-fixed-voltage 2.regulator: Failed to register regulator: -517 [ 13.061428] platform 2.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.061545] usb1_vbus: Failed to request enable GPIO108: -517 [ 13.061619] reg-fixed-voltage 3.regulator: Failed to register regulator: -517 [ 13.061636] platform 3.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.061751] usb2_vbus: Failed to request enable GPIO86: -517 [ 13.061823] reg-fixed-voltage 4.regulator: Failed to register regulator: -517 [ 13.061840] platform 4.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.061953] vdd_hdmi_5v0: Failed to request enable GPIO81: -517 [ 13.062026] reg-fixed-voltage 5.regulator: Failed to register regulator: -517 [ 13.062042] platform 5.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.062099] platform 6.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.063252] SCSI subsystem initialized [ 13.063406] libata version 3.00 loaded. [ 13.063587] usbcore: registered new interface driver usbfs [ 13.063624] usbcore: registered new interface driver hub [ 13.063712] usbcore: registered new device driver usb [ 13.066371] vdd-cpu: 500 <--> 1520 mV at 1100 mV [ 13.066572] genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0x100) [ 13.066766] pps_core: LinuxPPS API ver. 1 registered [ 13.066775] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 13.066796] PTP clock support registered [ 13.066828] EDAC MC: Ver: 3.0.0 [ 13.067724] Switched to clocksource arch_sys_counter [ 13.075199] NET: Registered protocol family 2 [ 13.075700] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 13.075885] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 13.076062] TCP: Hash tables configured (established 8192 bind 8192) [ 13.076123] TCP: reno registered [ 13.076137] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 13.076177] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 13.076408] NET: Registered protocol family 1 [ 13.076690] RPC: Registered named UNIX socket transport module. [ 13.076701] RPC: Registered udp transport module. [ 13.076708] RPC: Registered tcp transport module. [ 13.076715] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.077194] mop500-uib: failed to get adapter i2c2 [ 13.078652] bounce pool size: 64 pages [ 13.085919] NFS: Registering the id_resolver key type [ 13.085966] Key type id_resolver registered [ 13.085975] Key type id_legacy registered [ 13.086216] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 13.086226] io scheduler noop registered [ 13.086235] io scheduler deadline registered [ 13.086365] io scheduler cfq registered (default) [ 13.094886] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 13.142613] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 13.143719] Serial: IMX driver [ 13.144706] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122, base_baud = 25500000) is a Tegra [ 13.872173] console [ttyS0] enabled [ 13.876533] serial: Freescale lpuart driver [ 13.880972] [drm] Initialized drm 1.1.0 20060810 [ 13.888040] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 13.894551] ehci-platform: EHCI generic platform driver [ 13.899847] ehci-omap: OMAP-EHCI Host Controller driver [ 13.905141] ehci-orion: EHCI orion driver [ 13.909209] SPEAr-ehci: EHCI SPEAr driver [ 13.913276] tegra-ehci: Tegra EHCI driver [ 13.917461] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 13.924738] usbcore: registered new interface driver usb-storage [ 13.931270] platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral [ 13.939290] mousedev: PS/2 mouse device common for all mice [ 13.945531] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc0 [ 13.952646] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 13.959410] sdhci: Secure Digital Host Controller Interface driver [ 13.965565] sdhci: Copyright(c) Pierre Ossman [ 13.970208] sdhci-pltfm: SDHCI platform and OF driver helper [ 13.976314] sdhci-tegra 78000400.sdhci: Got CD GPIO #170. [ 13.982712] mmc0: no vqmmc regulator found [ 13.986805] mmc0: no vmmc regulator found [ 13.990791] mmc0: Invalid maximum block size, assuming 512 bytes [ 14.033856] mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA [ 14.041315] mmc1: no vqmmc regulator found [ 14.045408] mmc1: no vmmc regulator found [ 14.049394] mmc1: Invalid maximum block size, assuming 512 bytes [ 14.093617] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 14.101379] usbcore: registered new interface driver usbhid [ 14.106935] usbhid: USB HID core driver [ 14.110980] TCP: cubic registered [ 14.114760] NET: Registered protocol family 10 [ 14.119798] sit: IPv6 over IPv4 tunneling driver [ 14.124990] Key type dns_resolver registered [ 14.129356] Registering SWP/SWPB emulation handler [ 14.137214] dvdd_ts: 1800 mV [ 14.140461] lcd_bl_en: 5000 mV [ 14.143863] usb1_vbus: 5000 mV [ 14.147018] reg-fixed-voltage 3.regulator: Failed to find supply vin [ 14.153447] reg-fixed-voltage 3.regulator: Failed to register regulator: -517 [ 14.160551] platform 3.regulator: Driver reg-fixed-voltage requests probe deferral [ 14.168525] usb2_vbus: 5000 mV [ 14.171674] reg-fixed-voltage 4.regulator: Failed to find supply vin [ 14.178086] reg-fixed-voltage 4.regulator: Failed to register regulator: -517 [ 14.185209] platform 4.regulator: Driver reg-fixed-voltage requests probe deferral [ 14.193097] vdd_hdmi_5v0: 5000 mV [ 14.196521] reg-fixed-voltage 5.regulator: Failed to find supply vin [ 14.202919] reg-fixed-voltage 5.regulator: Failed to register regulator: -517 [ 14.210043] platform 5.regulator: Driver reg-fixed-voltage requests probe deferral [ 14.215409] mmc1: BKOPS_EN bit is not set [ 14.221854] platform 6.regulator: Driver reg-fixed-voltage requests probe deferral [ 14.229877] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 14.237277] platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral [ 14.241772] mmc1: new HS200 MMC card at address 0001 [ 14.242214] mmcblk0: mmc1:0001 SEM32G 29.1 GiB [ 14.242377] mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 14.242540] mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 14.242697] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 14.271683] tegra_rtc 7000e000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 14.273757] Primary GPT is invalid, using alternate GPT. [ 14.273782] mmcblk0: p1 p2 p3 p4 p5 [ 14.276586] mmcblk0boot1: unknown partition table [ 14.278137] mmcblk0boot0: unknown partition table [ 14.278661] usb1_vbus: 5000 mV [ 14.278701] reg-fixed-voltage 3.regulator: Failed to find supply vin [ 14.278814] reg-fixed-voltage 3.regulator: Failed to register regulator: -517 [ 14.278829] platform 3.regulator: Driver reg-fixed-voltage requests probe deferral [ 14.279315] usb2_vbus: 5000 mV [ 14.279348] reg-fixed-voltage 4.regulator: Failed to find supply vin [ 14.279452] reg-fixed-voltage 4.regulator: Failed to register regulator: -517 [ 14.279466] platform 4.regulator: Driver reg-fixed-voltage requests probe deferral [ 14.279926] vdd_hdmi_5v0: 5000 mV [ 14.279956] reg-fixed-voltage 5.regulator: Failed to find supply vin [ 14.280057] reg-fixed-voltage 5.regulator: Failed to register regulator: -517 [ 14.280071] platform 5.regulator: Driver reg-fixed-voltage requests probe deferral [ 14.280436] platform 6.regulator: Driver reg-fixed-voltage requests probe deferral [ 14.280994] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 14.281449] platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral [ 14.397102] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 14.438532] EXT4-fs (mmcblk0p1): recovery complete [ 14.443329] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 14.451411] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 14.459457] devtmpfs: mounted [ 14.462850] Freeing unused kernel memory: 472K (c0699000 - c070f000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell I have no name!@(none):/#