U-Boot 2011.03 (Jun 11 2013 - 06:07:37) T114 Board: NVIDIA Dalmore DRAM: 2 GiB MMC: Tegra2 SD/MMC: 0, Tegra2 SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  0 Dalmore # Dalmore #usb reset (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.10 scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found scanning bus for ethernet devices... 1 Ethernet Device(s) found Dalmore #setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt init=/bin/bash' Dalmore #setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Dalmore #tftpboot 0x81000000 zImage.multi_v7_defconfig Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################# 2.8 MiB/s done Bytes transferred = 3938800 (3c19f0 hex) Dalmore #tftpboot 0x82000000 tegra114-dalmore.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'tegra114-dalmore.dtb'. Load address: 0x82000000 Loading: *################################################# 2.5 MiB/s done Bytes transferred = 29073 (7191 hex) Dalmore #bootz 0x81000000 - 0x82000000 ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 81ff5000, end 81fff190 ... OK Starting kernel ... Timer summary in microseconds: Mark Elapsed Stage 0 0 awake 2,669,652 2,669,652 usb_start 6,673,303 4,003,651 eth_start 6,673,301 -2 tftp start 10,503,271 3,829,970 tftp done 12,685,559 2,182,288 start_kernel [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.12.0-rc4-23628-gd0e639c (pwalmsley@tamien) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 SMP Mon Oct 7 00:53:25 PDT 2013 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: NVIDIA Tegra SoC (Flattened Device Tree), model: NVIDIA Tegra114 Dalmore evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c07a2a00, node_mem_map c07ea000 [ 0.000000] DMA zone: 1520 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2574 pages used for memmap [ 0.000000] HighMem zone: 329472 pages, LIFO batch:31 [ 0.000000] Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 1 [ 0.000000] PERCPU: Embedded 5 pages/cpu @c1802000 s6976 r0 d13504 u32768 [ 0.000000] pcpu-alloc: s6976 r0 d13504 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522512 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2070616K/2096128K available (5332K kernel code, 589K rwdata, 1388K rodata, 474K init, 278K bss, 25512K reserved, 1317888K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] .text : 0xc0008000 - 0xc0698528 (6722 kB) [ 0.000000] .init : 0xc0699000 - 0xc070fb40 ( 475 kB) [ 0.000000] .data : 0xc0710000 - 0xc07a37e0 ( 590 kB) [ 0.000000] .bss : 0xc07a37e8 - 0xc07e9334 ( 279 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms [ 0.000000] Architected cp15 timer(s) running at 12.00MHz (virt). [ 0.000000] Switching to timer-based delay loop [ 0.000000] sched_clock: ARM arch timer >56 bits at 12000kHz, resolution 83ns [ 0.000000] Console: colour dummy device 80x30 [ 12.626126] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 12.626142] pid_max: default: 32768 minimum: 301 [ 12.626294] Mount-cache hash table entries: 512 [ 12.634068] CPU: Testing write buffer coherency: ok [ 12.634314] /cpus/cpu@0 missing clock-frequency property [ 12.634341] /cpus/cpu@1 missing clock-frequency property [ 12.634366] /cpus/cpu@2 missing clock-frequency property [ 12.634391] /cpus/cpu@3 missing clock-frequency property [ 12.634404] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 12.634430] Setting up static identity map for 0xc05108e0 - 0xc0510978 [ 12.634637] unable to find compatible sirf rstc node in dtb [ 12.635864] CPU1: Booted secondary processor [ 12.635890] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 12.636422] CPU2: Booted secondary processor [ 12.636446] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 12.636959] CPU3: Booted secondary processor [ 12.636983] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 12.637071] Brought up 4 CPUs [ 12.637097] SMP: Total of 4 processors activated. [ 12.637105] CPU: All CPU(s) started in SVC mode. [ 12.637751] devtmpfs: initialized [ 12.643082] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 12.643270] pinctrl core: initialized pinctrl subsystem [ 12.643625] regulator-dummy: no parameters [ 12.646231] NET: Registered protocol family 16 [ 12.646467] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 12.656542] Serial: AMBA PL011 UART driver [ 12.661550] bio: create slab at 0 [ 12.662896] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 12.662918] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 12.663306] vdd_ac_bat: 5000 mV [ 12.663491] dvdd_ts: Failed to request enable GPIO61: -517 [ 12.663582] reg-fixed-voltage 1.regulator: Failed to register regulator: -517 [ 12.663601] platform 1.regulator: Driver reg-fixed-voltage requests probe deferral [ 12.663716] lcd_bl_en: Failed to request enable GPIO58: -517 [ 12.663793] reg-fixed-voltage 2.regulator: Failed to register regulator: -517 [ 12.663810] platform 2.regulator: Driver reg-fixed-voltage requests probe deferral [ 12.663925] usb1_vbus: Failed to request enable GPIO108: -517 [ 12.664000] reg-fixed-voltage 3.regulator: Failed to register regulator: -517 [ 12.664017] platform 3.regulator: Driver reg-fixed-voltage requests probe deferral [ 12.664132] usb2_vbus: Failed to request enable GPIO86: -517 [ 12.664205] reg-fixed-voltage 4.regulator: Failed to register regulator: -517 [ 12.664222] platform 4.regulator: Driver reg-fixed-voltage requests probe deferral [ 12.664334] vdd_hdmi_5v0: Failed to request enable GPIO81: -517 [ 12.664407] reg-fixed-voltage 5.regulator: Failed to register regulator: -517 [ 12.664424] platform 5.regulator: Driver reg-fixed-voltage requests probe deferral [ 12.664480] platform 6.regulator: Driver reg-fixed-voltage requests probe deferral [ 12.665630] SCSI subsystem initialized [ 12.665783] libata version 3.00 loaded. [ 12.665959] usbcore: registered new interface driver usbfs [ 12.665995] usbcore: registered new interface driver hub [ 12.666098] usbcore: registered new device driver usb [ 12.668769] vdd-cpu: 500 <--> 1520 mV at 1100 mV [ 12.668968] genirq: Setting trigger mode 8 for irq 118 failed (gic_set_type+0x0/0x100) [ 12.669158] pps_core: LinuxPPS API ver. 1 registered [ 12.669167] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 12.669189] PTP clock support registered [ 12.669222] EDAC MC: Ver: 3.0.0 [ 12.670116] Switched to clocksource arch_sys_counter [ 12.677671] NET: Registered protocol family 2 [ 12.678174] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 12.678360] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 12.678537] TCP: Hash tables configured (established 8192 bind 8192) [ 12.678596] TCP: reno registered [ 12.678611] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 12.678652] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 12.678879] NET: Registered protocol family 1 [ 12.679144] RPC: Registered named UNIX socket transport module. [ 12.679153] RPC: Registered udp transport module. [ 12.679160] RPC: Registered tcp transport module. [ 12.679168] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 12.679644] mop500-uib: failed to get adapter i2c2 [ 12.681104] bounce pool size: 64 pages [ 12.688420] NFS: Registering the id_resolver key type [ 12.688457] Key type id_resolver registered [ 12.688467] Key type id_legacy registered [ 12.688708] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 12.688719] io scheduler noop registered [ 12.688728] io scheduler deadline registered [ 12.688858] io scheduler cfq registered (default) [ 12.697336] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 12.744695] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 12.745796] Serial: IMX driver [ 12.746801] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122, base_baud = 25500000) is a Tegra [ 13.474248] console [ttyS0] enabled [ 13.478613] serial: Freescale lpuart driver [ 13.483054] [drm] Initialized drm 1.1.0 20060810 [ 13.490112] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 13.496605] ehci-platform: EHCI generic platform driver [ 13.501919] ehci-omap: OMAP-EHCI Host Controller driver [ 13.507212] ehci-orion: EHCI orion driver [ 13.511280] SPEAr-ehci: EHCI SPEAr driver [ 13.515345] tegra-ehci: Tegra EHCI driver [ 13.519531] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 13.526820] usbcore: registered new interface driver usb-storage [ 13.533349] platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral [ 13.541360] mousedev: PS/2 mouse device common for all mice [ 13.547589] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc0 [ 13.554705] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 13.561468] sdhci: Secure Digital Host Controller Interface driver [ 13.567631] sdhci: Copyright(c) Pierre Ossman [ 13.572276] sdhci-pltfm: SDHCI platform and OF driver helper [ 13.578374] sdhci-tegra 78000400.sdhci: Got CD GPIO #170. [ 13.584770] mmc0: no vqmmc regulator found [ 13.588859] mmc0: no vmmc regulator found [ 13.592847] mmc0: Invalid maximum block size, assuming 512 bytes [ 13.636256] mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA [ 13.643715] mmc1: no vqmmc regulator found [ 13.647806] mmc1: no vmmc regulator found [ 13.651792] mmc1: Invalid maximum block size, assuming 512 bytes [ 13.696005] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 13.703769] usbcore: registered new interface driver usbhid [ 13.709323] usbhid: USB HID core driver [ 13.713368] TCP: cubic registered [ 13.717155] NET: Registered protocol family 10 [ 13.722189] sit: IPv6 over IPv4 tunneling driver [ 13.727383] Key type dns_resolver registered [ 13.731754] Registering SWP/SWPB emulation handler [ 13.739587] dvdd_ts: 1800 mV [ 13.742832] lcd_bl_en: 5000 mV [ 13.746234] usb1_vbus: 5000 mV [ 13.749389] reg-fixed-voltage 3.regulator: Failed to find supply vin [ 13.755816] reg-fixed-voltage 3.regulator: Failed to register regulator: -517 [ 13.762921] platform 3.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.770889] usb2_vbus: 5000 mV [ 13.774039] reg-fixed-voltage 4.regulator: Failed to find supply vin [ 13.780451] reg-fixed-voltage 4.regulator: Failed to register regulator: -517 [ 13.787573] platform 4.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.795465] vdd_hdmi_5v0: 5000 mV [ 13.798888] reg-fixed-voltage 5.regulator: Failed to find supply vin [ 13.805287] reg-fixed-voltage 5.regulator: Failed to register regulator: -517 [ 13.812412] platform 5.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.817815] mmc1: BKOPS_EN bit is not set [ 13.824221] platform 6.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.832229] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 13.839630] platform 7d008000.usb-phy: Driver tegra-phy requests probe deferral [ 13.844250] mmc1: new HS200 MMC card at address 0001 [ 13.844685] mmcblk0: mmc1:0001 SEM32G 29.1 GiB [ 13.844847] mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 13.845000] mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 13.845158] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 13.847530] Primary GPT is invalid, using alternate GPT. [ 13.847555] mmcblk0: p1 p2 p3 p4 p5 [ 13.850339] mmcblk0boot1: unknown partition table [ 13.851896] mmcblk0boot0: unknown partition table [ 13.892493] usb1_vbus: 5000 mV [ 13.895662] reg-fixed-voltage 3.regulator: Failed to find supply vin [ 13.902061] reg-fixed-voltage 3.regulator: Failed to register regulator: -517 [ 13.909179] platform 3.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.917101] usb2_vbus: 5000 mV [ 13.920251] reg-fixed-voltage 4.regulator: Failed to find supply vin [ 13.926660] reg-fixed-voltage 4.regulator: Failed to register regulator: -517 [ 13.933762] platform 4.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.941665] vdd_hdmi_5v0: 5000 mV [ 13.945088] reg-fixed-voltage 5.regulator: Failed to find supply vin [ 13.951484] reg-fixed-voltage 5.regulator: Failed to register regulator: -517 [ 13.958601] platform 5.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.966430] platform 6.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.974413] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 13.981571] tegra_rtc 7000e000.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 13.994489] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 14.037900] EXT4-fs (mmcblk0p1): recovery complete [ 14.042679] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 14.050779] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 14.058832] devtmpfs: mounted [ 14.062214] Freeing unused kernel memory: 472K (c0699000 - c070f000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell I have no name!@(none):/#