U-Boot 2011.03 (Jun 11 2013 - 06:07:37) T114 Board: NVIDIA Dalmore DRAM: 2 GiB MMC: Tegra2 SD/MMC: 0, Tegra2 SD/MMC: 1 In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 2  1  0 Dalmore # Dalmore #usb reset (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.10 scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found scanning bus for ethernet devices... 1 Ethernet Device(s) found Dalmore #setenv bootargs 'ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt init=/bin/bash' Dalmore #setenv ipaddr 192.168.100.100; setenv serverip 192.168.100.1; setenv tftpserverip 192.168.100.1 Dalmore #tftpboot 0x81000000 zImage.multi_v7_defconfig Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'zImage.multi_v7_defconfig'. Load address: 0x81000000 Loading: *################################################# 2.8 MiB/s done Bytes transferred = 3966248 (3c8528 hex) Dalmore #tftpboot 0x82000000 tegra114-dalmore.dtb Using asx0 device TFTP from server 192.168.100.1; our IP address is 192.168.100.100 Filename 'tegra114-dalmore.dtb'. Load address: 0x82000000 Loading: *################################################# 2.3 MiB/s done Bytes transferred = 24048 (5df0 hex) Dalmore #bootz 0x81000000 - 0x82000000 ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 81ff7000, end 81fffdef ... OK Starting kernel ... Timer summary in microseconds: Mark Elapsed Stage 0 0 awake 3,033,944 3,033,944 usb_start 7,037,257 4,003,313 eth_start 7,037,255 -2 tftp start 10,879,186 3,841,931 tftp done 13,049,088 2,169,902 start_kernel [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.11.0-rc6-12195-gb36f4be (pwalmsley@tamien) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #1 SMP Sun Aug 18 15:07:15 PDT 2013 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: NVIDIA Tegra SoC (Flattened Device Tree), model: NVIDIA Tegra114 Dalmore evaluation board [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 524032 [ 0.000000] free_area_init_node: node 0, pgdat c07b4a00, node_mem_map c07fc000 [ 0.000000] DMA zone: 1520 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2574 pages used for memmap [ 0.000000] HighMem zone: 329472 pages, LIFO batch:31 [ 0.000000] Tegra Revision: A01 SKU: 0 CPU Process: 1 Core Process: 1 [ 0.000000] PERCPU: Embedded 5 pages/cpu @c1811000 s7168 r0 d13312 u32768 [ 0.000000] pcpu-alloc: s7168 r0 d13312 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522512 [ 0.000000] Kernel command line: ignore_loglevel console=ttyS0,115200n8 rw root=/dev/mmcblk0p1 rootwait gpt init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2070564K/2096128K available (5383K kernel code, 584K rwdata, 1412K rodata, 479K init, 279K bss, 25564K reserved, 1317888K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] .text : 0xc0008000 - 0xc06ab060 (6797 kB) [ 0.000000] .init : 0xc06ac000 - 0xc0723c00 ( 479 kB) [ 0.000000] .data : 0xc0724000 - 0xc07b6140 ( 585 kB) [ 0.000000] .bss : 0xc07b6140 - 0xc07fbe14 ( 280 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms [ 0.000000] Architected local timer running at 12.00MHz (virt). [ 0.000000] Switching to timer-based delay loop [ 0.000000] sched_clock: ARM arch timer >56 bits at 12000kHz, resolution 83ns [ 0.000000] Console: colour dummy device 80x30 [ 13.219586] Calibrating delay loop (skipped), value calculated using timer frequency.. 24.00 BogoMIPS (lpj=120000) [ 13.219603] pid_max: default: 32768 minimum: 301 [ 13.219758] Mount-cache hash table entries: 512 [ 13.226295] CPU: Testing write buffer coherency: ok [ 13.226519] /cpus/cpu@0 missing clock-frequency property [ 13.226533] /cpus/cpu@1 missing clock-frequency property [ 13.226542] /cpus/cpu@2 missing clock-frequency property [ 13.226551] /cpus/cpu@3 missing clock-frequency property [ 13.226565] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 13.226593] Setting up static identity map for 0xc051c7e8 - 0xc051c880 [ 13.226771] unable to find compatible sirf rstc node in dtb [ 13.228207] CPU1: Booted secondary processor [ 13.228235] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 13.229023] CPU2: Booted secondary processor [ 13.229047] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 13.229847] CPU3: Booted secondary processor [ 13.229871] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 13.229960] Brought up 4 CPUs [ 13.229988] SMP: Total of 4 processors activated (96.00 BogoMIPS). [ 13.229995] CPU: All CPU(s) started in SVC mode. [ 13.230636] devtmpfs: initialized [ 13.236180] pinctrl core: initialized pinctrl subsystem [ 13.236525] regulator-dummy: no parameters [ 13.236876] NET: Registered protocol family 16 [ 13.237103] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 13.237295] unable to find compatible sirf pwrc node in dtb [ 13.246905] Serial: AMBA PL011 UART driver [ 13.251840] bio: create slab at 0 [ 13.253152] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 13.253175] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 13.253546] vdd_ac_bat: 5000 mV [ 13.253733] dvdd_ts: Failed to request enable GPIO61: -517 [ 13.253828] reg-fixed-voltage 1.regulator: Failed to register regulator: -517 [ 13.253850] platform 1.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.253969] lcd_bl_en: Failed to request enable GPIO58: -517 [ 13.254051] reg-fixed-voltage 2.regulator: Failed to register regulator: -517 [ 13.254070] platform 2.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.254188] usb1_vbus: Failed to request enable GPIO108: -517 [ 13.254269] reg-fixed-voltage 3.regulator: Failed to register regulator: -517 [ 13.254288] platform 3.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.254406] usb2_vbus: Failed to request enable GPIO86: -517 [ 13.254485] reg-fixed-voltage 4.regulator: Failed to register regulator: -517 [ 13.254504] platform 4.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.254621] vdd_hdmi_5v0: Failed to request enable GPIO81: -517 [ 13.254699] reg-fixed-voltage 5.regulator: Failed to register regulator: -517 [ 13.254717] platform 5.regulator: Driver reg-fixed-voltage requests probe deferral [ 13.255606] vgaarb: loaded [ 13.255925] SCSI subsystem initialized [ 13.256080] libata version 3.00 loaded. [ 13.256252] usbcore: registered new interface driver usbfs [ 13.256296] usbcore: registered new interface driver hub [ 13.256381] usbcore: registered new device driver usb [ 13.259037] vdd-cpu: 500 <--> 1520 mV at 1100 mV [ 13.259315] pps_core: LinuxPPS API ver. 1 registered [ 13.259325] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 13.259347] PTP clock support registered [ 13.259388] EDAC MC: Ver: 3.0.0 [ 13.260264] Switched to clocksource arch_sys_counter [ 13.267740] NET: Registered protocol family 2 [ 13.268235] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 13.268426] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 13.268602] TCP: Hash tables configured (established 8192 bind 8192) [ 13.268662] TCP: reno registered [ 13.268676] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 13.268717] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 13.268942] NET: Registered protocol family 1 [ 13.269209] RPC: Registered named UNIX socket transport module. [ 13.269219] RPC: Registered udp transport module. [ 13.269226] RPC: Registered tcp transport module. [ 13.269233] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.269244] PCI: CLS 0 bytes, default 64 [ 13.271179] bounce pool size: 64 pages [ 13.278656] NFS: Registering the id_resolver key type [ 13.278702] Key type id_resolver registered [ 13.278712] Key type id_legacy registered [ 13.278949] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 13.278960] io scheduler noop registered [ 13.278969] io scheduler deadline registered [ 13.279111] io scheduler cfq registered (default) [ 13.287566] tegra-apbdma 6000a000.dma: Tegra20 APB DMA driver register 32 channels [ 13.334775] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 13.335892] Serial: IMX driver [ 13.336861] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra [ 14.048157] console [ttyS0] enabled [ 14.052443] serial: Freescale lpuart driver [ 14.056797] [drm] Initialized drm 1.1.0 20060810 [ 14.063762] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 14.070272] ehci-pci: EHCI PCI platform driver [ 14.074723] ehci-platform: EHCI generic platform driver [ 14.080026] ehci-omap: OMAP-EHCI Host Controller driver [ 14.085295] ehci-orion: EHCI orion driver [ 14.089372] SPEAr-ehci: EHCI SPEAr driver [ 14.093433] tegra-ehci: Tegra EHCI driver [ 14.097777] usbcore: registered new interface driver usb-storage [ 14.104899] mousedev: PS/2 mouse device common for all mice [ 14.111077] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc0 [ 14.118208] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock [ 14.124917] sdhci: Secure Digital Host Controller Interface driver [ 14.131072] sdhci: Copyright(c) Pierre Ossman [ 14.135705] sdhci-pltfm: SDHCI platform and OF driver helper [ 14.141658] sdhci-tegra 78000400.sdhci: Got CD GPIO #170. [ 14.148080] mmc0: no vqmmc regulator found [ 14.152156] mmc0: no vmmc regulator found [ 14.156144] mmc0: Invalid maximum block size, assuming 512 bytes [ 14.206478] mmc0: SDHCI controller on 78000400.sdhci [78000400.sdhci] using ADMA [ 14.213946] mmc1: no vqmmc regulator found [ 14.218041] mmc1: no vmmc regulator found [ 14.222028] mmc1: Invalid maximum block size, assuming 512 bytes [ 14.266236] mmc1: SDHCI controller on 78000600.sdhci [78000600.sdhci] using ADMA [ 14.273998] usbcore: registered new interface driver usbhid [ 14.279554] usbhid: USB HID core driver [ 14.283597] TCP: cubic registered [ 14.287381] NET: Registered protocol family 10 [ 14.292411] sit: IPv6 over IPv4 tunneling driver [ 14.297599] Key type dns_resolver registered [ 14.301955] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 14.309618] Registering SWP/SWPB emulation handler [ 14.315314] dvdd_ts: 1800 mV [ 14.318588] lcd_bl_en: 5000 mV [ 14.321963] usb1_vbus: 5000 mV [ 14.325129] reg-fixed-voltage 3.regulator: Failed to find supply vin [ 14.331558] reg-fixed-voltage 3.regulator: Failed to register regulator: -517 [ 14.338676] platform 3.regulator: Driver reg-fixed-voltage requests probe deferral [ 14.346646] usb2_vbus: 5000 mV [ 14.349795] reg-fixed-voltage 4.regulator: Failed to find supply vin [ 14.356212] reg-fixed-voltage 4.regulator: Failed to register regulator: -517 [ 14.363315] platform 4.regulator: Driver reg-fixed-voltage requests probe deferral [ 14.371226] vdd_hdmi_5v0: 5000 mV [ 14.374635] reg-fixed-voltage 5.regulator: Failed to find supply vin [ 14.381046] reg-fixed-voltage 5.regulator: Failed to register regulator: -517 [ 14.388066] mmc1: BKOPS_EN bit is not set [ 14.392140] platform 5.regulator: Driver reg-fixed-voltage requests probe deferral [ 14.399891] tegra_rtc 7000e000.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 14.409085] Waiting for root device /dev/mmcblk0p1... [ 14.414577] mmc1: new HS200 MMC card at address 0001 [ 14.419910] mmcblk0: mmc1:0001 SEM32G 29.1 GiB [ 14.424566] mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 14.430611] mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 14.436653] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 14.444649] Primary GPT is invalid, using alternate GPT. [ 14.449970] mmcblk0: p1 p2 p3 p4 p5 [ 14.456032] mmcblk0boot1: unknown partition table [ 14.462219] mmcblk0boot0: unknown partition table [ 14.467446] usb1_vbus: 5000 mV [ 14.470606] reg-fixed-voltage 3.regulator: Failed to find supply vin [ 14.477024] reg-fixed-voltage 3.regulator: Failed to register regulator: -517 [ 14.484128] platform 3.regulator: Driver reg-fixed-voltage requests probe deferral [ 14.492061] usb2_vbus: 5000 mV [ 14.495210] reg-fixed-voltage 4.regulator: Failed to find supply vin [ 14.501621] reg-fixed-voltage 4.regulator: Failed to register regulator: -517 [ 14.508735] platform 4.regulator: Driver reg-fixed-voltage requests probe deferral [ 14.516634] vdd_hdmi_5v0: 5000 mV [ 14.520042] reg-fixed-voltage 5.regulator: Failed to find supply vin [ 14.526450] reg-fixed-voltage 5.regulator: Failed to register regulator: -517 [ 14.533553] platform 5.regulator: Driver reg-fixed-voltage requests probe deferral [ 14.628517] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 14.667202] EXT4-fs (mmcblk0p1): recovery complete [ 14.671981] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 14.680077] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 14.687949] devtmpfs: mounted [ 14.691333] Freeing unused kernel memory: 476K (c06ac000 - c0723000) bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell I have no name!@(none):/#